bool gtcmtr_data(void)
{
cm_region_list *reg_ref;
unsigned char *ptr,regnum;
unsigned short top,len;
mval v;
int x;
ptr = curr_entry->clb_ptr->mbf;
assert(*ptr == CMMS_Q_DATA);
ptr++;
GET_USHORT(len, ptr);
ptr += sizeof(unsigned short);
regnum = *ptr++;
reg_ref = gtcm_find_region(curr_entry, regnum);
len--; /* subtract size of regnum */
CM_GET_GVCURRKEY(ptr, len);
gtcm_bind_name(reg_ref->reghead, TRUE);
x = 0;
if (gv_target->root)
x = gvcst_data();
v = *fndata_table[x / 10][x & 1];
ptr = curr_entry->clb_ptr->mbf;
*ptr++ = CMMS_R_DATA;
len = sizeof(unsigned char);
PUT_USHORT(ptr, len);
ptr += sizeof(unsigned short);
*ptr++ = MV_FORCE_INTD(&v);
curr_entry->clb_ptr->cbl = ptr - curr_entry->clb_ptr->mbf;
return TRUE;
}
void op_gvdata(mval *v)
{
mint x;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
if (TREF(gv_last_subsc_null) && NEVER == gv_cur_region->null_subs)
sgnl_gvnulsubsc();
x = 0;
if (gv_cur_region->dyn.addr->acc_meth == dba_bg || gv_cur_region->dyn.addr->acc_meth == dba_mm)
{
if (gv_target->root)
x = gvcst_data();
} else if (gv_cur_region->dyn.addr->acc_meth == dba_cm)
x = gvcmx_data();
else
x = gvusr_data();
*v = *fndata_table[x / 10][x & 1];
}
void op_gvdata(mval *v)
{
mint x;
gvnh_reg_t *gvnh_reg;
enum db_acc_method acc_meth;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
if (TREF(gv_last_subsc_null) && NEVER == gv_cur_region->null_subs)
sgnl_gvnulsubsc();
acc_meth = REG_ACC_METH(gv_cur_region);
if (IS_ACC_METH_BG_OR_MM(acc_meth))
{
gvnh_reg = TREF(gd_targ_gvnh_reg);
if (NULL == gvnh_reg)
x = (gv_target->root ? gvcst_data() : 0);
else
INVOKE_GVCST_SPR_XXX(gvnh_reg, x = gvcst_spr_data());
} else if (REG_ACC_METH(gv_cur_region) == dba_cm)
x = gvcmx_data();
else
x = gvusr_data();
*v = *fndata_table[x / 10][x & 1];
}
/* Upgrade ^#t global in "reg" region */
void trigger_upgrade(gd_region *reg)
{
boolean_t est_first_pass, do_upgrade, is_defined;
boolean_t was_null = FALSE, is_null = FALSE;
int seq_num, trig_seq_num;
int currlabel;
mval tmpmval, xecuteimval, *gvname, *tmpmv, *tmpmv2;
int4 result, tmpint4;
uint4 curend, gvname_prev, xecute_curend;
uint4 hash_code, kill_hash_code;
int count, i, xecutei, tncount;
char *trigname, *trigindex, *ptr;
char name_and_index[MAX_MIDENT_LEN + 1 + MAX_DIGITS_IN_INT];
char trigvn[MAX_MIDENT_LEN + 1 + MAX_DIGITS_IN_INT], nullbyte[1];
uint4 trigname_len, name_index_len;
int ilen;
sgmnt_addrs *csa;
jnl_private_control *jpc;
uint4 sts;
int close_res;
hash128_state_t hash_state, kill_hash_state;
uint4 hash_totlen, kill_hash_totlen;
int trig_protected_mval_push_count;
# ifdef DEBUG
int save_dollar_tlevel;
# endif
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
assert(gv_cur_region == reg);
assert(!dollar_tlevel); /* caller should have ensured this. this is needed as otherwise things get complicated. */
assert(!is_replicator); /* caller should have ensured this. this is needed so we dont bump jnl_seqno (if replicating) */
csa = &FILE_INFO(reg)->s_addrs;
assert(csa->hdr->hasht_upgrade_needed);
/* If before-image journaling is turned on in this region (does not matter if replication is turned on or not),
* once this transaction is done, we need to switch to new journal file and cut the back link because
* otherwise it is possible for backward journal recovery (or rollback) or source server to encounter
* the journal records generated in this ^#t-upgrade-transaction in which case they dont know to handle
* it properly (e.g. rollback or backward recovery does not know to restore csa->hdr->hasht_upgrade_needed
* if it rolls back this transaction). To achieve this, we set hold_onto_crit to TRUE and do the jnl link
* cut AFTER the transaction commits but before anyone else can sneak in to do any more updates.
* Since most often we expect databases to be journaled, we do this hold_onto_crit even for the non-journaled case.
*/
grab_crit(reg);
csa->hold_onto_crit = TRUE;
DEBUG_ONLY(save_dollar_tlevel = dollar_tlevel);
assert(!donot_INVOKE_MUMTSTART);
DEBUG_ONLY(donot_INVOKE_MUMTSTART = TRUE);
op_tstart(IMPLICIT_TSTART, TRUE, &literal_batch, 0); /* 0 ==> save no locals but RESTART OK */
ESTABLISH_NORET(trigger_upgrade_ch, est_first_pass);
/* On a TP restart anywhere down below, this line is where the restart resumes execution from */
assert(donot_INVOKE_MUMTSTART); /* Make sure still set for every try/retry of TP transaction */
change_reg(); /* TP_CHANGE_REG wont work as we need to set sgm_info_ptr */
assert(NULL != cs_addrs);
assert(csa == cs_addrs);
SET_GVTARGET_TO_HASHT_GBL(csa); /* sets up gv_target */
assert(NULL != gv_target);
INITIAL_HASHT_ROOT_SEARCH_IF_NEEDED; /* Needed to do every retry in case restart was due to an online rollback.
* This also sets up gv_currkey */
/* Do actual upgrade of ^#t global.
*
* Below is a sample layout of the label 2 ^#t global
* -------------------------------------------------------
* ^#t("#TNAME","x")="a"_$C(0)_"1" (present in DEFAULT only)
* ^#t("#TRHASH",89771515,1)="a"_$C(0)_"1" (present in DEFAULT only)
* ^#t("#TRHASH",106937755,1)="a"_$C(0)_"1" (present in DEFAULT only)
* ^#t("a",1,"BHASH")="106937755"
* ^#t("a",1,"CHSET")="M"
* ^#t("a",1,"CMD")="S"
* ^#t("a",1,"LHASH")="89771515"
* ^#t("a",1,"TRIGNAME")="x#"
* ^#t("a",1,"XECUTE")=" do ^twork"
* ^#t("a","#COUNT")="1"
* ^#t("a","#CYCLE")="1"
* ^#t("a","#LABEL")="2"
*
* Below is a sample layout of the label 3 ^#t global
* -------------------------------------------------------
* ^#t("#LABEL")="3" (present only after upgrade, not regular trigger load)
* ^#t("#TNAME","x")="a"_$C(0)_"1" (present in CURRENT region)
* ^#t("a",1,"BHASH")="71945627"
* ^#t("a",1,"CHSET")="M"
* ^#t("a",1,"CMD")="S"
* ^#t("a",1,"LHASH")="71945627"
* ^#t("a",1,"TRIGNAME")="x#"
* ^#t("a",1,"XECUTE")=" do ^twork"
* ^#t("a","#COUNT")="1"
* ^#t("a","#CYCLE")="2"
* ^#t("a","#LABEL")="3"
* ^#t("a","#TRHASH",71945627,1)="a"_$C(0)_"1"
*
* Key aspects of the format change
* ----------------------------------
* 1) New ^#t("#LABEL")="3" to indicate the format of the ^#t global. This is in addition to
* ^#t("a","#LABEL") etc. which is already there. This way we have a #LABEL for not just the installed
* triggers but also for the name information stored in the #TNAME nodes.
* 2) In the BHASH and LHASH fields. The hash computation is different so there are more chances of BHASH and LHASH
* matching in which case we store only one #TRHASH entry (instead of two). So thre is fewer ^#t records in the new
* format in most cases.
* 3) ^#t("a","#LABEL") bumps from 2 to 3. Similarly ^#t("a","#CYCLE") bumps by one (to make sure triggers for this
* global get re-read if and when we implement an -ONLINE upgrade).
* 4) DEFAULT used to have ^#t("#TNAME",...) nodes corresponding to triggers across ALL regions in the gbldir and
* other regions used to have NO ^#t("#TNAME",...) nodes whereas after the upgrade every region have
* ^#t("#TNAME",...) nodes corresponding to triggers installed in that region. So it is safer to kill ^#t("#TNAME")
* nodes and add them as needed.
* 5) #TRHASH has moved from ^#t() to ^#t(<gbl>). So it is safer to kill ^#t("#TRHASH") nodes and add them as needed.
*
* Below is a sample layout of the label 4 ^#t global
* -------------------------------------------------------
* ^#t("#TNAME","x")="a"_$C(0)_"1" (present in CURRENT region)
* ^#t("a",1,"BHASH")="71945627"
* ^#t("a",1,"CHSET")="M"
* ^#t("a",1,"CMD")="S"
* ^#t("a",1,"LHASH")="71945627"
* ^#t("a",1,"TRIGNAME")="x#"
* ^#t("a",1,"XECUTE")=" do ^twork"
* ^#t("a","#COUNT")="1"
* ^#t("a","#CYCLE")="2"
* ^#t("a","#LABEL")="4"
* ^#t("a","#TRHASH",71945627,1)="a"_$C(0)_"1"
*
* Key aspects of the format change
* ----------------------------------
* 1) Removed ^#t("#LABEL") as it is redundant information and trigger load does not include it
* 2) Multiline triggers were incorrectly processed resulting in incorrect BHASH and LHASH values. Upgrade fixes this
* 3) ^#t("a","#LABEL") bumps from 3 to 4. Similarly ^#t("a","#CYCLE") bumps by one (to make sure
* triggers for this global get re-read if and when we implement an -ONLINE upgrade).
*/
tmpmv = &tmpmval; /* At all points maintain this relationship. The two are used interchangeably below */
if (gv_target->root)
do_upgrade = TRUE;
/* The below logic assumes ^#t global does not have any integrity errors */
assert(do_upgrade); /* caller should have not invoked us otherwise */
if (do_upgrade)
{ /* kill ^#t("#TRHASH"), ^#t("#TNAME") and ^#t("#LABEL") first. Regenerate each again as we process ^#t(<gbl>,...) */
csa->incr_db_trigger_cycle = TRUE; /* so that we increment csd->db_trigger_cycle at commit time.
* this forces concurrent processes to read upgraded triggers.
*/
if (JNL_WRITE_LOGICAL_RECS(csa))
{ /* Note that the ^#t upgrade is a physical layout change. But it has no logical change (i.e. users
* see the same MUPIP TRIGGER -SELECT output as before). So write only a dummy LGTRIG journal
* record for this operation. Hence write a string that starts with a trigger comment character ";".
*/
assert(!gv_cur_region->read_only);
jnl_format(JNL_LGTRIG, NULL, (mval *)&literal_trigjnlrec, 0);
}
/* KILL ^#t("#LABEL") unconditionally */
BUILD_HASHT_SUB_CURRKEY(LITERAL_HASHLABEL, STRLEN(LITERAL_HASHLABEL));
if (0 != gvcst_data())
gvcst_kill(TRUE);
/* KILL ^#t("#TNAME") unconditionally and regenerate */
BUILD_HASHT_SUB_CURRKEY(LITERAL_HASHTNAME, STRLEN(LITERAL_HASHTNAME));
if (0 != gvcst_data())
gvcst_kill(TRUE);
/* KILL ^#t("#TRHASH") unconditionally and regenerate */
BUILD_HASHT_SUB_CURRKEY(LITERAL_HASHTRHASH, STRLEN(LITERAL_HASHTRHASH));
if (0 != gvcst_data())
gvcst_kill(TRUE);
/* Loop through all global names for which ^#t(<gvn>) exists. The only first-level subscripts of ^#t starting
* with # are #TNAME and #TRHASH in collation order. So after #TRHASH we expect to find subscripts that are
* global names. Hence the HASHTRHASH code is placed AFTER the HASHTNAME code above.
*/
TREF(gd_targ_gvnh_reg) = NULL; /* needed so op_gvorder below goes through gvcst_order (i.e. focuses only
* on the current region) and NOT through gvcst_spr_order (which does not
* apply anyways in the case of ^#t).
*/
nullbyte[0] = '\0';
trig_protected_mval_push_count = 0;
INCR_AND_PUSH_MV_STENT(gvname); /* Protect gvname from garbage collection */
do
{
op_gvorder(gvname);
if (0 == gvname->str.len)
break;
assert(ARRAYSIZE(trigvn) > gvname->str.len);
memcpy(&trigvn[0], gvname->str.addr, gvname->str.len);
gvname->str.addr = &trigvn[0]; /* point away from stringpool to avoid stp_gcol issues */
/* Save gv_currkey->prev so it is restored before next call to op_gvorder (which cares about this field).
* gv_currkey->prev gets tampered with in the for loop below (e.g. BUILD_HASHT_SUB_CURRKEY macro).
* No need to do this for gv_currkey->end since the body of the for loop takes care of restoring it.
*/
gvname_prev = gv_currkey->prev;
BUILD_HASHT_SUB_CURRKEY(gvname->str.addr, gvname->str.len);
/* At this point, gv_currkey is ^#t(<gvn>) */
/* Increment ^#t(<gvn>,"#CYCLE") */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_hashcycle, tmpmv);
assert(is_defined);
tmpint4 = mval2i(tmpmv);
tmpint4++;
i2mval(tmpmv, tmpint4);
gvtr_set_hasht_gblsubs((mval *)&literal_hashcycle, tmpmv);
/* Read ^#t(<gvn>,"#COUNT") */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_hashcount, tmpmv);
if (is_defined)
{
tmpint4 = mval2i(tmpmv);
count = tmpint4;
/* Get ^#t(<gvn>,"#LABEL"), error out for invalid values. Upgrade disallowed for label 1 triggers */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_hashlabel, tmpmv);
assert(is_defined);
currlabel = mval2i(tmpmv);
if ((V19_HASHT_GBL_LABEL_INT >= currlabel) || (HASHT_GBL_CURLABEL_INT <= currlabel))
rts_error_csa(CSA_ARG(csa) VARLSTCNT(8) ERR_TRIGUPBADLABEL, 6, currlabel,
HASHT_GBL_CURLABEL_INT, gvname->str.len, gvname->str.addr,
REG_LEN_STR(reg));
/* Set ^#t(<gvn>,"#LABEL")=HASHT_GBL_CURLABEL */
gvtr_set_hasht_gblsubs((mval *)&literal_hashlabel, (mval *)&literal_curlabel);
} else
count = 0;
/* Kill ^#t(<gvn>,"#TRHASH") unconditionally and regenerate */
gvtr_kill_hasht_gblsubs((mval *)&literal_hashtrhash, TRUE);
/* At this point, gv_currkey is ^#t(<gvn>) */
for (i = 1; i <= count; i++)
{
/* At this point, gv_currkey is ^#t(<gvn>) */
curend = gv_currkey->end; /* note gv_currkey->end before changing it so we can restore it later */
assert(KEY_DELIMITER == gv_currkey->base[curend]);
assert(gv_target->gd_csa == cs_addrs);
i2mval(tmpmv, i);
COPY_SUBS_TO_GVCURRKEY(tmpmv, gv_cur_region, gv_currkey, was_null, is_null);
/* At this point, gv_currkey is ^#t(<gvn>,i) */
/* Compute new LHASH and BHASH hash values.
* LHASH uses : GVSUBS, XECUTE
* BHASH uses : GVSUBS, DELIM, ZDELIM, PIECES, XECUTE
* So reach each of these pieces and compute hash along the way.
*/
STR_PHASH_INIT(hash_state, hash_totlen);
STR_PHASH_PROCESS(hash_state, hash_totlen, gvname->str.addr, gvname->str.len);
STR_PHASH_PROCESS(hash_state, hash_totlen, nullbyte, 1);
/* Read in ^#t(<gvn>,i,"GVSUBS") */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_gvsubs, tmpmv);
if (is_defined)
{
STR_PHASH_PROCESS(hash_state, hash_totlen, tmpmval.str.addr, tmpmval.str.len);
STR_PHASH_PROCESS(hash_state, hash_totlen, nullbyte, 1);
}
/* Copy over SET hash state (2-tuple <state,totlen>) to KILL hash state before adding
* the PIECES, DELIM, ZDELIM portions (those are only part of the SET hash).
*/
kill_hash_state = hash_state;
kill_hash_totlen = hash_totlen;
/* Read in ^#t(<gvn>,i,"PIECES") */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_pieces, tmpmv);
if (is_defined)
{
STR_PHASH_PROCESS(hash_state, hash_totlen, tmpmval.str.addr, tmpmval.str.len);
STR_PHASH_PROCESS(hash_state, hash_totlen, nullbyte, 1);
}
/* Read in ^#t(<gvn>,i,"DELIM") */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_delim, tmpmv);
if (is_defined)
{
STR_PHASH_PROCESS(hash_state, hash_totlen, tmpmval.str.addr, tmpmval.str.len);
STR_PHASH_PROCESS(hash_state, hash_totlen, nullbyte, 1);
}
/* Read in ^#t(<gvn>,i,"ZDELIM") */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_zdelim, tmpmv);
if (is_defined)
{
STR_PHASH_PROCESS(hash_state, hash_totlen, tmpmval.str.addr, tmpmval.str.len);
STR_PHASH_PROCESS(hash_state, hash_totlen, nullbyte, 1);
}
/* Read in ^#t(<gvn>,i,"XECUTE").
* Note: The XECUTE portion of the trigger definition is used in SET and KILL hash.
* But since we have started maintaining "hash_state" and "kill_hash_state" separately
* (due to PIECES, DELIM, ZDELIM) we need to update the hash for both using same input string.
*/
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_xecute, tmpmv);
if (is_defined)
{
STR_PHASH_PROCESS(hash_state, hash_totlen, tmpmval.str.addr, tmpmval.str.len);
STR_PHASH_PROCESS(kill_hash_state, kill_hash_totlen, tmpmval.str.addr, tmpmval.str.len);
} else
{ /* Multi-record XECUTE string */
/* At this point, gv_currkey is ^#t(<gvn>,i) */
xecute_curend = gv_currkey->end; /* note gv_currkey->end so we can restore it later */
assert(KEY_DELIMITER == gv_currkey->base[xecute_curend]);
tmpmv2 = (mval *)&literal_xecute;
COPY_SUBS_TO_GVCURRKEY(tmpmv2, gv_cur_region, gv_currkey, was_null, is_null);
xecutei = 1;
do
{
i2mval(&xecuteimval, xecutei);
is_defined = gvtr_get_hasht_gblsubs(&xecuteimval, tmpmv);
if (!is_defined)
break;
STR_PHASH_PROCESS(hash_state, hash_totlen, tmpmval.str.addr, tmpmval.str.len);
STR_PHASH_PROCESS(kill_hash_state, kill_hash_totlen,
tmpmval.str.addr, tmpmval.str.len);
xecutei++;
} while (TRUE);
/* Restore gv_currkey to ^#t(<gvn>,i) */
gv_currkey->end = xecute_curend;
gv_currkey->base[xecute_curend] = KEY_DELIMITER;
}
STR_PHASH_RESULT(hash_state, hash_totlen, hash_code);
STR_PHASH_RESULT(kill_hash_state, kill_hash_totlen, kill_hash_code);
/* Set ^#t(<gvn>,i,"LHASH") */
MV_FORCE_UMVAL(tmpmv, kill_hash_code);
gvtr_set_hasht_gblsubs((mval *)&literal_lhash, tmpmv);
/* Set ^#t(<gvn>,i,"BHASH") */
MV_FORCE_UMVAL(tmpmv, hash_code);
gvtr_set_hasht_gblsubs((mval *)&literal_bhash, tmpmv);
/* Read in ^#t(<gvn>,i,"TRIGNAME") to determine if #SEQNUM/#TNCOUNT needs to be maintained */
is_defined = gvtr_get_hasht_gblsubs((mval *)&literal_trigname, tmpmv);
assert(is_defined);
assert('#' == tmpmval.str.addr[tmpmval.str.len - 1]);
tmpmval.str.len--;
if ((tmpmval.str.len <= ARRAYSIZE(name_and_index)) &&
(NULL != (ptr = memchr(tmpmval.str.addr, '#', tmpmval.str.len))))
{ /* Auto-generated name. Need to maintain #SEQNUM/#TNCOUNT */
/* Take copy of trigger name into non-stringpool location to avoid stp_gcol issues */
trigname_len = ptr - tmpmval.str.addr;
ptr++;
name_index_len = (tmpmval.str.addr + tmpmval.str.len) - ptr;
assert(ARRAYSIZE(name_and_index) >= (trigname_len + 1 + name_index_len));
trigname = &name_and_index[0];
trigindex = ptr;
memcpy(trigname, tmpmval.str.addr, tmpmval.str.len);
A2I(ptr, ptr + name_index_len, trig_seq_num);
/* At this point, gv_currkey is ^#t(<gvn>,i) */
/* $get(^#t("#TNAME",<trigger name>,"#SEQNUM")) */
BUILD_HASHT_SUB_SUB_SUB_CURRKEY(LITERAL_HASHTNAME, STR_LIT_LEN(LITERAL_HASHTNAME),
trigname, trigname_len, LITERAL_HASHSEQNUM, STR_LIT_LEN(LITERAL_HASHSEQNUM));
seq_num = gvcst_get(tmpmv) ? mval2i(tmpmv) : 0;
if (trig_seq_num > seq_num)
{ /* Set ^#t("#TNAME",<trigger name>,"#SEQNUM") = trig_seq_num */
SET_TRIGGER_GLOBAL_SUB_SUB_SUB_STR(LITERAL_HASHTNAME,
STR_LIT_LEN(LITERAL_HASHTNAME), trigname, trigname_len,
LITERAL_HASHSEQNUM, STR_LIT_LEN(LITERAL_HASHSEQNUM),
trigindex, name_index_len, result);
assert(PUT_SUCCESS == result);
}
/* set ^#t("#TNAME",<trigger name>,"#TNCOUNT")++ */
BUILD_HASHT_SUB_SUB_SUB_CURRKEY(LITERAL_HASHTNAME, STR_LIT_LEN(LITERAL_HASHTNAME),
trigname, trigname_len, LITERAL_HASHTNCOUNT, STR_LIT_LEN(LITERAL_HASHTNCOUNT));
tncount = gvcst_get(tmpmv) ? mval2i(tmpmv) + 1 : 1;
i2mval(tmpmv, tncount);
SET_TRIGGER_GLOBAL_SUB_SUB_SUB_MVAL(LITERAL_HASHTNAME, STR_LIT_LEN(LITERAL_HASHTNAME),
trigname, trigname_len, LITERAL_HASHTNCOUNT, STR_LIT_LEN(LITERAL_HASHTNCOUNT),
tmpmval, result);
trigname_len += 1 + name_index_len; /* in preparation for ^#t("#TNAME") set below */
assert(PUT_SUCCESS == result);
BUILD_HASHT_SUB_CURRKEY(gvname->str.addr, gvname->str.len);
/* At this point, gv_currkey is ^#t(<gvn>) */
} else
{
/* Take copy of trigger name into non-stringpool location to avoid stp_gcol issues */
trigname = &name_and_index[0]; /* in preparation for ^#t("#TNAME") set below */
trigname_len = MIN(tmpmval.str.len, ARRAYSIZE(name_and_index));
assert(ARRAYSIZE(name_and_index) >= trigname_len);
memcpy(trigname, tmpmval.str.addr, trigname_len);
/* Restore gv_currkey to what it was at beginning of for loop iteration */
gv_currkey->end = curend;
gv_currkey->base[curend] = KEY_DELIMITER;
}
/* At this point, gv_currkey is ^#t(<gvn>) */
if (kill_hash_code != hash_code)
gvtr_set_hashtrhash(gvname->str.addr, gvname->str.len, kill_hash_code, i);
/* Set ^#t(<gvn>,"#TRHASH",hash_code,i) */
gvtr_set_hashtrhash(gvname->str.addr, gvname->str.len, hash_code, i);
/* Set ^#t("#TNAME",<trigname>)=<gvn>_$c(0)_<trigindx> */
/* The upgrade assumes that the region does not contain two triggers with the same name.
* V62000 and before could potentially have this out of design case. Once implemented
* the trigger integrity check will warn users of this edge case */
ptr = &trigvn[gvname->str.len];
*ptr++ = '\0';
ilen = 0;
I2A(ptr, ilen, i);
ptr += ilen;
assert(ptr <= ARRAYTOP(trigvn));
SET_TRIGGER_GLOBAL_SUB_SUB_STR(LITERAL_HASHTNAME, STR_LIT_LEN(LITERAL_HASHTNAME),
trigname, trigname_len, trigvn, ptr - gvname->str.addr, result);
assert(PUT_SUCCESS == result);
BUILD_HASHT_SUB_CURRKEY(gvname->str.addr, gvname->str.len);
/* At this point, gv_currkey is ^#t(<gvn>) */
}
/* At this point, gv_currkey is ^#t(<gvn>) i.e. gv_currkey->end is correct but gv_currkey->prev
* might have been tampered with. Restore it to proper value first.
*/
gv_currkey->prev = gvname_prev;
gvname->mvtype = 0; /* can now be garbage collected in the next iteration */
} while (TRUE);
}
op_tcommit();
REVERT; /* remove our condition handler */
DEBUG_ONLY(donot_INVOKE_MUMTSTART = FALSE;)
if (csa->hold_onto_crit)
void trigger_delete_all(char *trigger_rec, uint4 len, uint4 *trig_stats)
{
int count;
sgmnt_addrs *csa;
mval curr_gbl_name;
int cycle;
mval *mv_count_ptr;
mval *mv_cycle_ptr;
gd_region *reg, *reg_top;
int4 result;
gd_region *lgtrig_reg;
mval trigger_cycle;
mval trigger_count;
boolean_t this_db_updated;
uint4 triggers_deleted;
mval trigjrec;
boolean_t jnl_format_done;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
assert(0 < dollar_tlevel);
jnl_format_done = FALSE;
lgtrig_reg = NULL;
trigjrec.mvtype = MV_STR;
trigjrec.str.len = len;
trigjrec.str.addr = trigger_rec;
triggers_deleted = 0;
for (reg = gd_header->regions, reg_top = reg + gd_header->n_regions; reg < reg_top; reg++)
{
GVTR_SWITCH_REG_AND_HASHT_BIND_NAME(reg);
csa = cs_addrs;
if (NULL == csa) /* not BG or MM access method */
continue;
/* gv_target now points to ^#t in region "reg" */
/* To write the LGTRIG logical jnl record, choose some region that has journaling enabled */
if (!reg->read_only && !jnl_format_done && JNL_WRITE_LOGICAL_RECS(csa))
lgtrig_reg = reg;
if (!gv_target->root)
continue;
/* kill ^#t("#TNAME") */
BUILD_HASHT_SUB_CURRKEY(LITERAL_HASHTNAME, STRLEN(LITERAL_HASHTNAME));
if (0 != gvcst_data())
{ /* Issue error if we dont have permissions to touch ^#t global */
if (reg->read_only)
rts_error_csa(CSA_ARG(csa) VARLSTCNT(4) ERR_TRIGMODREGNOTRW, 2, REG_LEN_STR(reg));
gvcst_kill(TRUE);
}
/* Kill all descendents of ^#t(trigvn, ...) where trigvn is any global with a trigger,
* but skip the ^#t("#...",...) entries. Setup ^#t("$") as the key for op_gvorder
*/
BUILD_HASHT_SUB_CURRKEY(LITERAL_MAXHASHVAL, STRLEN(LITERAL_MAXHASHVAL));
TREF(gv_last_subsc_null) = FALSE; /* We know its not null, but prior state is unreliable */
this_db_updated = FALSE;
while (TRUE)
{
op_gvorder(&curr_gbl_name);
/* quit:$length(curr_gbl_name)=0 */
if (0 == curr_gbl_name.str.len)
break;
/* $get(^#t(curr_gbl_name,#COUNT)) */
BUILD_HASHT_SUB_SUB_CURRKEY(curr_gbl_name.str.addr, curr_gbl_name.str.len,
LITERAL_HASHCOUNT, STRLEN(LITERAL_HASHCOUNT));
if (gvcst_get(&trigger_count))
{
/* Now that we know there is something to kill, check if we have permissions to touch ^#t global */
if (reg->read_only)
rts_error_csa(CSA_ARG(csa) VARLSTCNT(4) ERR_TRIGMODREGNOTRW, 2, REG_LEN_STR(reg));
mv_count_ptr = &trigger_count;
count = MV_FORCE_UINT(mv_count_ptr);
/* $get(^#t(curr_gbl_name,#CYCLE)) */
BUILD_HASHT_SUB_SUB_CURRKEY(curr_gbl_name.str.addr, curr_gbl_name.str.len,
LITERAL_HASHCYCLE, STRLEN(LITERAL_HASHCYCLE));
if (!gvcst_get(&trigger_cycle))
{ /* Found #COUNT, there must be #CYCLE */
if (CDB_STAGNATE > t_tries)
t_retry(cdb_sc_triggermod);
assert(WBTEST_HELPOUT_TRIGDEFBAD == gtm_white_box_test_case_number);
rts_error_csa(CSA_ARG(csa) VARLSTCNT(12) ERR_TRIGDEFBAD, 6,
curr_gbl_name.str.len, curr_gbl_name.str.addr,
curr_gbl_name.str.len, curr_gbl_name.str.addr, LEN_AND_LIT("\"#CYCLE\""),
ERR_TEXT, 2, RTS_ERROR_TEXT("#CYCLE field is missing"));
}
mv_cycle_ptr = &trigger_cycle;
cycle = MV_FORCE_UINT(mv_cycle_ptr);
if (!jnl_format_done && JNL_WRITE_LOGICAL_RECS(csa))
{
jnl_format(JNL_LGTRIG, NULL, &trigjrec, 0);
jnl_format_done = TRUE;
}
/* kill ^#t(curr_gbl_name) */
BUILD_HASHT_SUB_CURRKEY(curr_gbl_name.str.addr, curr_gbl_name.str.len);
gvcst_kill(TRUE);
/* Note : ^#t(curr_gbl_name,"#TRHASH") is also killed as part of the above */
cycle++;
MV_FORCE_MVAL(&trigger_cycle, cycle);
/* set ^#t(curr_gbl_name,#CYCLE)=trigger_cycle */
SET_TRIGGER_GLOBAL_SUB_SUB_MVAL(curr_gbl_name.str.addr, curr_gbl_name.str.len,
LITERAL_HASHCYCLE, STRLEN(LITERAL_HASHCYCLE), trigger_cycle, result);
assert(PUT_SUCCESS == result);
this_db_updated = TRUE;
triggers_deleted += count;
} /* else there is no #COUNT, then no triggers, leave #CYCLE alone */
/* get ready for op_gvorder() call for next trigger under ^#t */
BUILD_HASHT_SUB_CURRKEY(curr_gbl_name.str.addr, curr_gbl_name.str.len);
}
if (this_db_updated)
{
csa->incr_db_trigger_cycle = TRUE;
if (dollar_ztrigger_invoked)
{ /* increment db_dztrigger_cycle so that next gvcst_put/gvcst_kill in this transaction,
* on this region, will re-read. See trigger_update.c for a comment on why it is okay
* for db_dztrigger_cycle to be incremented more than once in the same transaction
*/
csa->db_dztrigger_cycle++;
}
}
}
if (!jnl_format_done && (NULL != lgtrig_reg))
{ /* There was no journaled region that had a ^#t update, but found at least one journaled region
* so write a LGTRIG logical jnl record there.
*/
GVTR_SWITCH_REG_AND_HASHT_BIND_NAME(lgtrig_reg);
csa = cs_addrs;
JNLPOOL_INIT_IF_NEEDED(csa, csa->hdr, csa->nl); /* see previous usage for comment on why it is needed */
assert(dollar_tlevel);
T_BEGIN_SETORKILL_NONTP_OR_TP(ERR_TRIGLOADFAIL); /* needed to set update_trans TRUE on this region
* even if NO db updates happen to ^#t nodes. */
jnl_format(JNL_LGTRIG, NULL, &trigjrec, 0);
jnl_format_done = TRUE;
}
if (triggers_deleted)
{
util_out_print_gtmio("All existing triggers (count = !UL) deleted", FLUSH, triggers_deleted);
trig_stats[STATS_DELETED] += triggers_deleted;
trig_stats[STATS_NOERROR_TRIGFILE]++;
} else
{
util_out_print_gtmio("No matching triggers found for deletion", FLUSH);
trig_stats[STATS_UNCHANGED_TRIGFILE]++;
}
}
int4 trigger_delete(char *trigvn, int trigvn_len, mval *trigger_count, int index)
{
int count;
mval mv_val;
mval *mv_val_ptr;
char *ptr1;
int4 result;
int4 retval;
stringkey kill_hash, set_hash;
int sub_indx;
char tmp_trig_str[MAX_BUFF_SIZE];
int4 trig_len;
char trig_name[MAX_TRIGNAME_LEN];
int trig_name_len;
int tmp_len;
char *tt_val[NUM_SUBS];
uint4 tt_val_len[NUM_SUBS];
mval trigger_value;
mval trigger_index;
mval xecute_index;
uint4 xecute_idx;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
assert(!gv_cur_region->read_only); /* caller should have already checked this */
assert(cs_addrs->hasht_tree == gv_target); /* should have been set up by caller */
assert(gv_target->root); /* should have been ensured by caller */
mv_val_ptr = &mv_val;
MV_FORCE_UMVAL(&trigger_index, index);
count = MV_FORCE_UINT(trigger_count);
/* build up array of values - needed for comparison in hash stuff */
ptr1 = tmp_trig_str;
memcpy(ptr1, trigvn, trigvn_len);
ptr1 += trigvn_len;
*ptr1++ = '\0';
tmp_len = trigvn_len + 1;
/* Assert that BHASH and LHASH are not part of NUM_SUBS calculation (confirms the -2 done in the #define of NUM_SUBS) */
assert(BHASH_SUB == NUM_SUBS);
assert(LHASH_SUB == (NUM_SUBS + 1));
for (sub_indx = 0; sub_indx < NUM_SUBS; sub_indx++)
{
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, trigger_index, trigger_subs[sub_indx],
STRLEN(trigger_subs[sub_indx]));
trig_len = gvcst_get(&trigger_value) ? trigger_value.str.len : 0;
if (0 == trig_len)
{
if (((TRIGNAME_SUB == sub_indx) || (CMD_SUB == sub_indx) || (CHSET_SUB == sub_indx)))
{ /* CMD, NAME and CHSET cannot be zero length */
if (CDB_STAGNATE > t_tries)
t_retry(cdb_sc_triggermod);
assert(WBTEST_HELPOUT_TRIGDEFBAD == gtm_white_box_test_case_number);
rts_error_csa(CSA_ARG(REG2CSA(gv_cur_region)) VARLSTCNT(8) ERR_TRIGDEFBAD, 6, trigvn_len, trigvn,
trigvn_len, trigvn, STRLEN(trigger_subs[sub_indx]), trigger_subs[sub_indx]);
}
tt_val[sub_indx] = NULL;
tt_val_len[sub_indx] = 0;
continue;
}
if (TRIGNAME_SUB == sub_indx)
{
trig_name_len = MIN(trig_len, MAX_TRIGNAME_LEN);
assert(MAX_TRIGNAME_LEN >= trig_len);
memcpy(trig_name, trigger_value.str.addr, trig_name_len);
tt_val[sub_indx] = NULL;
tt_val_len[sub_indx] = 0;
continue;
}
tt_val[sub_indx] = ptr1;
tt_val_len[sub_indx] = trig_len;
tmp_len += trig_len;
if (0 < trig_len)
{
if (MAX_BUFF_SIZE <= tmp_len)
return VAL_TOO_LONG;
memcpy(ptr1, trigger_value.str.addr, trig_len);
ptr1 += trig_len;
}
*ptr1++ = '\0';
tmp_len++;
}
/* Get trigger name, set hash value, and kill hash values from trigger before we delete it.
* The values will be used in clean ups associated with the deletion
*/
/* $get(^#t(GVN,trigger_index,"LHASH") for deletion in cleanup_trigger_hash */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, trigger_index, trigger_subs[LHASH_SUB],
STRLEN(trigger_subs[LHASH_SUB]));
if (gvcst_get(mv_val_ptr))
kill_hash.hash_code = (uint4)MV_FORCE_UINT(mv_val_ptr);
else
{
util_out_print_gtmio("The LHASH for global ^!AD does not exist", FLUSH, trigvn_len, trigvn);
kill_hash.hash_code = 0;
}
/* $get(^#t(GVN,trigger_index,"BHASH") for deletion in cleanup_trigger_hash */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, trigger_index, trigger_subs[BHASH_SUB],
STRLEN(trigger_subs[BHASH_SUB]));
if (gvcst_get(mv_val_ptr))
set_hash.hash_code = (uint4)MV_FORCE_UINT(mv_val_ptr);
else
{
util_out_print_gtmio("The BHASH for global ^!AD does not exist", FLUSH, trigvn_len, trigvn);
set_hash.hash_code = 0;
}
/* kill ^#t(GVN,trigger_index) */
BUILD_HASHT_SUB_MSUB_CURRKEY(trigvn, trigvn_len, trigger_index);
gvcst_kill(TRUE);
assert(0 == gvcst_data());
if (1 == count)
{ /* This is the last trigger for "trigvn" - clean up trigger name, remove #LABEL and #COUNT */
assert(1 == index);
BUILD_HASHT_SUB_SUB_CURRKEY(trigvn, trigvn_len, LITERAL_HASHLABEL, STRLEN(LITERAL_HASHLABEL));
gvcst_kill(TRUE);
BUILD_HASHT_SUB_SUB_CURRKEY(trigvn, trigvn_len, LITERAL_HASHCOUNT, STRLEN(LITERAL_HASHCOUNT));
gvcst_kill(TRUE);
cleanup_trigger_name(trigvn, trigvn_len, trig_name, trig_name_len);
cleanup_trigger_hash(trigvn, trigvn_len, tt_val, tt_val_len, &set_hash, &kill_hash, TRUE, index);
} else
{
cleanup_trigger_hash(trigvn, trigvn_len, tt_val, tt_val_len, &set_hash, &kill_hash, TRUE, index);
cleanup_trigger_name(trigvn, trigvn_len, trig_name, trig_name_len);
if (index != count)
{ /* Shift the last trigger (index is #COUNT value) to the just deleted trigger's index.
* This way count is always accurate and can still be used as the index for new triggers.
* Note - there is no dependence on the trigger order, or this technique wouldn't work.
*/
ptr1 = tmp_trig_str;
memcpy(ptr1, trigvn, trigvn_len);
ptr1 += trigvn_len;
*ptr1++ = '\0';
tmp_len = trigvn_len + 1;
for (sub_indx = 0; sub_indx < NUM_TOTAL_SUBS; sub_indx++)
{
/* $get(^#t(GVN,trigger_count,sub_indx) */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, *trigger_count, trigger_subs[sub_indx],
STRLEN(trigger_subs[sub_indx]));
if (gvcst_get(&trigger_value))
{
trig_len = trigger_value.str.len;
/* set ^#t(GVN,trigger_index,sub_indx)=^#t(GVN,trigger_count,sub_indx) */
SET_TRIGGER_GLOBAL_SUB_MSUB_SUB_MVAL(trigvn, trigvn_len, trigger_index,
trigger_subs[sub_indx], STRLEN(trigger_subs[sub_indx]), trigger_value, result);
assert(PUT_SUCCESS == result);
} else if (XECUTE_SUB == sub_indx)
{ /* multi line trigger broken up because it exceeds record size */
for (xecute_idx = 0; ; xecute_idx++)
{
i2mval(&xecute_index, xecute_idx);
BUILD_HASHT_SUB_MSUB_SUB_MSUB_CURRKEY(trigvn, trigvn_len, *trigger_count,
trigger_subs[sub_indx], STRLEN(trigger_subs[sub_indx]), xecute_index);
if (!gvcst_get(&trigger_value))
break;
SET_TRIGGER_GLOBAL_SUB_MSUB_SUB_MSUB_MVAL(trigvn, trigvn_len, trigger_index,
trigger_subs[sub_indx], STRLEN(trigger_subs[sub_indx]), xecute_index,
trigger_value, result);
assert(PUT_SUCCESS == result);
}
assert (xecute_idx >= 2); /* multi-line trigger, indices 0, 1 and 2 MUST be defined */
} else
{
if (((TRIGNAME_SUB == sub_indx) || (CMD_SUB == sub_indx) ||
(CHSET_SUB == sub_indx)))
{ /* CMD, NAME and CHSET cannot be zero length */
if (CDB_STAGNATE > t_tries)
t_retry(cdb_sc_triggermod);
assert(WBTEST_HELPOUT_TRIGDEFBAD == gtm_white_box_test_case_number);
rts_error_csa(CSA_ARG(REG2CSA(gv_cur_region)) VARLSTCNT(8) ERR_TRIGDEFBAD,
6, trigvn_len, trigvn, trigvn_len, trigvn,
STRLEN(trigger_subs[sub_indx]), trigger_subs[sub_indx]);
}
/* OPTIONS, PIECES and DELIM can be zero */
trig_len = 0;
}
if (NUM_SUBS > sub_indx)
{
tt_val[sub_indx] = ptr1;
tt_val_len[sub_indx] = trig_len;
tmp_len += trig_len;
if (0 < trig_len)
{
if (MAX_BUFF_SIZE <= tmp_len)
{ /* Exceeding the temporary buffer is impossible, restart*/
if (CDB_STAGNATE > t_tries)
t_retry(cdb_sc_triggermod);
assert(WBTEST_HELPOUT_TRIGDEFBAD == gtm_white_box_test_case_number);
rts_error_csa(CSA_ARG(REG2CSA(gv_cur_region)) VARLSTCNT(8) ERR_TRIGDEFBAD,
6, trigvn_len, trigvn, trigvn_len, trigvn,
STRLEN(trigger_subs[sub_indx]), trigger_subs[sub_indx]);
}
memcpy(ptr1, trigger_value.str.addr, trig_len);
ptr1 += trig_len;
}
*ptr1++ = '\0';
tmp_len++;
}
}
/* $get(^#t(GVN,trigger_count,"LHASH") for update_trigger_hash_value */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, *trigger_count, trigger_subs[LHASH_SUB],
STRLEN(trigger_subs[LHASH_SUB]));
if (!gvcst_get(mv_val_ptr))
return PUT_SUCCESS;
kill_hash.hash_code = (uint4)MV_FORCE_UINT(mv_val_ptr);
/* $get(^#t(GVN,trigger_count,"BHASH") for update_trigger_hash_value */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, *trigger_count, trigger_subs[BHASH_SUB],
STRLEN(trigger_subs[BHASH_SUB]));
if (!gvcst_get(mv_val_ptr))
return PUT_SUCCESS;
set_hash.hash_code = (uint4)MV_FORCE_UINT(mv_val_ptr);
/* update hash values from above */
if (VAL_TOO_LONG == (retval = update_trigger_hash_value(trigvn, trigvn_len, tt_val, tt_val_len,
&set_hash, &kill_hash, count, index)))
return VAL_TOO_LONG;
/* fix the value ^#t("#TNAME",^#t(GVN,index,"#TRIGNAME")) to point to the correct "index" */
if (VAL_TOO_LONG == (retval = update_trigger_name_value(tt_val[TRIGNAME_SUB],
tt_val_len[TRIGNAME_SUB], index)))
return VAL_TOO_LONG;
/* kill ^#t(GVN,COUNT) which was just shifted to trigger_index */
BUILD_HASHT_SUB_MSUB_CURRKEY(trigvn, trigvn_len, *trigger_count);
gvcst_kill(TRUE);
}
/* Update #COUNT */
count--;
MV_FORCE_UMVAL(trigger_count, count);
SET_TRIGGER_GLOBAL_SUB_SUB_MVAL(trigvn, trigvn_len, LITERAL_HASHCOUNT, STRLEN(LITERAL_HASHCOUNT), *trigger_count,
result);
assert(PUT_SUCCESS == result); /* Size of count can only get shorter or stay the same */
}
return PUT_SUCCESS;
}
int4 trigger_delete(char *trigvn, int trigvn_len, mval *trigger_count, int index)
{
int count;
mval *mv_cnt_ptr;
mval mv_val;
mval *mv_val_ptr;
int num_len;
char *ptr1;
int4 result;
int4 retval;
char save_currkey[SIZEOF(gv_key) + DBKEYSIZE(MAX_KEY_SZ)];
gv_key *save_gv_currkey;
stringkey kill_hash, set_hash;
int sub_indx;
char tmp_trig_str[MAX_BUFF_SIZE];
int4 trig_len;
char trig_name[MAX_TRIGNAME_LEN];
int trig_name_len;
int tmp_len;
char *tt_val[NUM_SUBS];
uint4 tt_val_len[NUM_SUBS];
mval trigger_value;
mval trigger_index;
mval xecute_index;
uint4 xecute_idx;
uint4 used_trigvn_len;
mval val;
char val_str[MAX_DIGITS_IN_INT + 1];
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
mv_val_ptr = &mv_val;
MV_FORCE_MVAL(&trigger_index, index);
count = MV_FORCE_INT(trigger_count);
/* build up array of values - needed for comparison in hash stuff */
ptr1 = tmp_trig_str;
memcpy(ptr1, trigvn, trigvn_len);
ptr1 += trigvn_len;
*ptr1++ = '\0';
tmp_len = trigvn_len + 1;
for (sub_indx = 0; sub_indx < NUM_SUBS; sub_indx++)
{
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, trigger_index, trigger_subs[sub_indx],
STRLEN(trigger_subs[sub_indx]));
trig_len = gvcst_get(&trigger_value) ? trigger_value.str.len : 0;
if (0 == trig_len)
{
tt_val[sub_indx] = NULL;
tt_val_len[sub_indx] = 0;
continue;
}
if (TRIGNAME_SUB == sub_indx)
{
trig_name_len = trig_len;
assert(MAX_TRIGNAME_LEN >= trig_len);
memcpy(trig_name, trigger_value.str.addr, trig_name_len);
tt_val[sub_indx] = NULL;
tt_val_len[sub_indx] = 0;
continue;
}
tt_val[sub_indx] = ptr1;
tt_val_len[sub_indx] = trig_len;
tmp_len += trig_len;
if (0 < trig_len)
{
if (MAX_BUFF_SIZE <= tmp_len)
return VAL_TOO_LONG;
memcpy(ptr1, trigger_value.str.addr, trig_len);
ptr1 += trig_len;
}
*ptr1++ = '\0';
tmp_len++;
}
/* Get trigger name, set hash value, and kill hash values from trigger before we delete it.
* The values will be used in clean ups associated with the deletion
*/
/* $get(^#t(GVN,trigger_index,"LHASH") for deletion in cleanup_trigger_hash */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, trigger_index, trigger_subs[LHASH_SUB],
STRLEN(trigger_subs[LHASH_SUB]));
if (gvcst_get(mv_val_ptr))
kill_hash.hash_code = (uint4)MV_FORCE_INT(mv_val_ptr);
else {
util_out_print_gtmio("The LHASH for global ^!AD does not exist", FLUSH, trigvn_len, trigvn);
kill_hash.hash_code = 0;
}
/* $get(^#t(GVN,trigger_index,"BHASH") for deletion in cleanup_trigger_hash */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, trigger_index, trigger_subs[BHASH_SUB],
STRLEN(trigger_subs[BHASH_SUB]));
if (gvcst_get(mv_val_ptr))
set_hash.hash_code = (uint4)MV_FORCE_INT(mv_val_ptr);
else {
util_out_print_gtmio("The BHASH for global ^!AD does not exist", FLUSH, trigvn_len, trigvn);
set_hash.hash_code = 0;
}
/* kill ^#t(GVN,trigger_index) */
BUILD_HASHT_SUB_MSUB_CURRKEY(trigvn, trigvn_len, trigger_index);
gvcst_kill(TRUE);
assert(0 == gvcst_data());
if (1 == count)
{ /* This is the last trigger for "trigvn" - clean up trigger name, remove #LABEL and #COUNT */
assert(1 == index);
BUILD_HASHT_SUB_SUB_CURRKEY(trigvn, trigvn_len, LITERAL_HASHLABEL, STRLEN(LITERAL_HASHLABEL));
gvcst_kill(TRUE);
BUILD_HASHT_SUB_SUB_CURRKEY(trigvn, trigvn_len, LITERAL_HASHCOUNT, STRLEN(LITERAL_HASHCOUNT));
gvcst_kill(TRUE);
cleanup_trigger_name(trigvn, trigvn_len, trig_name, trig_name_len);
cleanup_trigger_hash(trigvn, trigvn_len, tt_val, tt_val_len, &set_hash, &kill_hash, TRUE, 0);
} else
{
cleanup_trigger_hash(trigvn, trigvn_len, tt_val, tt_val_len, &set_hash, &kill_hash, TRUE, index);
cleanup_trigger_name(trigvn, trigvn_len, trig_name, trig_name_len);
if (index != count)
{ /* Shift the last trigger (index is #COUNT value) to the just deleted trigger's index.
* This way count is always accurate and can still be used as the index for new triggers.
* Note - there is no dependence on the trigger order, or this technique wouldn't work.
*/
ptr1 = tmp_trig_str;
memcpy(ptr1, trigvn, trigvn_len);
ptr1 += trigvn_len;
*ptr1++ = '\0';
for (sub_indx = 0; sub_indx < NUM_TOTAL_SUBS; sub_indx++)
{
/* $get(^#t(GVN,trigger_count,sub_indx) */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, *trigger_count, trigger_subs[sub_indx],
STRLEN(trigger_subs[sub_indx]));
if (gvcst_get(&trigger_value))
{
trig_len = trigger_value.str.len;
/* set ^#t(GVN,trigger_index,sub_indx)=^#t(GVN,trigger_count,sub_indx) */
SET_TRIGGER_GLOBAL_SUB_MSUB_SUB_MVAL(trigvn, trigvn_len, trigger_index,
trigger_subs[sub_indx], STRLEN(trigger_subs[sub_indx]), trigger_value, result);
assert(PUT_SUCCESS == result);
} else if (XECUTE_SUB == sub_indx)
{ /* multi line trigger broken up because it exceeds record size */
for (xecute_idx = 0; ; xecute_idx++)
{
i2mval(&xecute_index, xecute_idx);
BUILD_HASHT_SUB_MSUB_SUB_MSUB_CURRKEY(trigvn, trigvn_len, *trigger_count,
trigger_subs[sub_indx], STRLEN(trigger_subs[sub_indx]), xecute_index);
if (!gvcst_get(&trigger_value))
break;
SET_TRIGGER_GLOBAL_SUB_MSUB_SUB_MSUB_MVAL(trigvn, trigvn_len, trigger_index,
trigger_subs[sub_indx], STRLEN(trigger_subs[sub_indx]), xecute_index,
trigger_value, result);
assert(PUT_SUCCESS == result);
}
assert (xecute_idx >= 2); /* multi-line trigger, indices 0, 1 and 2 MUST be defined */
} else
{
/* in PRO this is a nasty case that will result in an access violation
* because data that should be present is not. In the next go around
* with trigger installation this case should be handled better */
assert(!((TRIGNAME_SUB == sub_indx) || (CMD_SUB == sub_indx) ||
(CHSET_SUB == sub_indx))); /* these should not be zero length */
trig_len = 0;
}
if (NUM_SUBS > sub_indx)
{
tt_val[sub_indx] = ptr1;
tt_val_len[sub_indx] = trig_len;
if (0 < trig_len)
{
memcpy(ptr1, trigger_value.str.addr, trig_len);
ptr1 += trig_len;
}
*ptr1++ = '\0';
}
}
/* $get(^#t(GVN,trigger_count,"LHASH") for update_trigger_hash_value */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, *trigger_count, trigger_subs[LHASH_SUB],
STRLEN(trigger_subs[LHASH_SUB]));
if (!gvcst_get(mv_val_ptr))
return PUT_SUCCESS;
kill_hash.hash_code = (uint4)MV_FORCE_INT(mv_val_ptr);
/* $get(^#t(GVN,trigger_count,"BHASH") for update_trigger_hash_value */
BUILD_HASHT_SUB_MSUB_SUB_CURRKEY(trigvn, trigvn_len, *trigger_count, trigger_subs[BHASH_SUB],
STRLEN(trigger_subs[BHASH_SUB]));
if (!gvcst_get(mv_val_ptr))
return PUT_SUCCESS;
set_hash.hash_code = (uint4)MV_FORCE_INT(mv_val_ptr);
/* update hash values from above */
if (VAL_TOO_LONG == (retval = update_trigger_hash_value(trigvn, trigvn_len, tt_val, tt_val_len,
&set_hash, &kill_hash, count, index)))
return VAL_TOO_LONG;
/* fix the value ^#t("#TNAME",^#t(GVN,index,"#TRIGNAME")) to point to the correct "index" */
if (VAL_TOO_LONG == (retval = update_trigger_name_value(trigvn_len, tt_val[TRIGNAME_SUB],
tt_val_len[TRIGNAME_SUB], index)))
return VAL_TOO_LONG;
/* kill ^#t(GVN,COUNT) which was just shifted to trigger_index */
BUILD_HASHT_SUB_MSUB_CURRKEY(trigvn, trigvn_len, *trigger_count);
gvcst_kill(TRUE);
}
/* Update #COUNT */
count--;
MV_FORCE_MVAL(trigger_count, count);
SET_TRIGGER_GLOBAL_SUB_SUB_MVAL(trigvn, trigvn_len, LITERAL_HASHCOUNT, STRLEN(LITERAL_HASHCOUNT), *trigger_count,
result);
assert(PUT_SUCCESS == result); /* Size of count can only get shorter or stay the same */
}
trigger_incr_cycle(trigvn, trigvn_len);
return PUT_SUCCESS;
}
void op_zprevious(mval *v)
{
int4 n;
int min_reg_index, reg_index, res;
mname_entry gvname;
mval tmpmval, *datamval;
enum db_acc_method acc_meth;
boolean_t found, ok_to_change_currkey;
gd_binding *gd_map_start, *map, *prev_map;
gd_addr *gd_targ;
gvnh_reg_t *gvnh_reg;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
assert(gv_currkey->prev || !TREF(gv_last_subsc_null));
if (gv_currkey->prev)
{ /* If last subscript is a NULL subscript, modify gv_currkey such that a gvcst_search of the resulting gv_currkey
* will find the last available subscript. But in case of dba_usr, (the custom implementation of $ZPREVIOUS which
* is overloaded for DDP now but could be more in the future) it is better to hand over gv_currkey as it is so
* the custom implementation can decide what to do with it.
*/
acc_meth = REG_ACC_METH(gv_cur_region);
ok_to_change_currkey = (dba_usr != acc_meth);
if (TREF(gv_last_subsc_null) && ok_to_change_currkey)
{ /* Replace the last subscript with the highest possible subscript value i.e. the byte sequence
* 0xFF (STR_SUB_MAXVAL), 0xFF, 0xFF ... as much as possible i.e. until gv_currkey->top permits.
* This subscript is guaranteed to be NOT present in the database since a user who tried to set this
* exact subscripted global would have gotten a GVSUBOFLOW error (because GT.M sets aside a few bytes
* of padding space). And yet this is guaranteed to collate AFTER any existing subscript. Therefore we
* can safely do a gvcst_zprevious on this key to get at the last existing key in the database.
*
* With standard null collation, the last subscript will be 0x01
* Without standard null collation, the last subscript will be 0xFF
* Assert that is indeed the case as this will be used to restore the replaced subscript at the end.
*/
assert(gv_cur_region->std_null_coll || (STR_SUB_PREFIX == gv_currkey->base[gv_currkey->prev]));
assert(!gv_cur_region->std_null_coll || (SUBSCRIPT_STDCOL_NULL == gv_currkey->base[gv_currkey->prev]));
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->prev + 1]);
assert(gv_currkey->end == gv_currkey->prev + 2);
assert(gv_currkey->end < gv_currkey->top); /* need "<" (not "<=") to account for terminating 0x00 */
GVZPREVIOUS_APPEND_MAX_SUBS_KEY(gv_currkey, gv_target);
}
if ((dba_bg == acc_meth) || (dba_mm == acc_meth))
{
gvnh_reg = TREF(gd_targ_gvnh_reg);
if (NULL == gvnh_reg)
found = (gv_target->root ? gvcst_zprevious() : FALSE);
else
INVOKE_GVCST_SPR_XXX(gvnh_reg, found = gvcst_spr_zprevious());
} else if (dba_cm == acc_meth)
found = gvcmx_zprevious();
else
found = gvusr_zprevious();
v->mvtype = 0; /* so stp_gcol (if invoked below) can free up space currently occupied (BYPASSOK)
* by this to-be-overwritten mval */
if (found)
{
gv_altkey->prev = gv_currkey->prev;
if (!IS_STP_SPACE_AVAILABLE(MAX_KEY_SZ))
{
if ((0xFF != gv_altkey->base[gv_altkey->prev])
&& (SUBSCRIPT_STDCOL_NULL != gv_altkey->base[gv_altkey->prev]))
n = MAX_FORM_NUM_SUBLEN;
else
{
n = gv_altkey->end - gv_altkey->prev;
assert(n > 0);
}
v->str.len = 0; /* so stp_gcol (if invoked) can free up space currently occupied by this (BYPASSOK)
* to-be-overwritten mval */
ENSURE_STP_FREE_SPACE(n);
}
v->str.addr = (char *)stringpool.free;
v->str.len = MAX_KEY_SZ;
stringpool.free = gvsub2str(&gv_altkey->base[gv_altkey->prev], &(v->str), FALSE);
v->str.len = INTCAST((char *)stringpool.free - v->str.addr);
assert(v->str.addr < (char *)stringpool.top && v->str.addr >= (char *)stringpool.base);
assert(v->str.addr + v->str.len <= (char *)stringpool.top &&
v->str.addr + v->str.len >= (char *)stringpool.base);
} else
v->str.len = 0;
v->mvtype = MV_STR; /* initialize mvtype now that mval has been otherwise completely set up */
if (TREF(gv_last_subsc_null) && ok_to_change_currkey)
{ /* Restore gv_currkey to what it was at function entry time */
gv_currkey->base[gv_currkey->prev + 1] = KEY_DELIMITER;
if (gv_cur_region->std_null_coll)
gv_currkey->base[gv_currkey->prev] = SUBSCRIPT_STDCOL_NULL;
assert(gv_cur_region->std_null_coll || (STR_SUB_PREFIX == gv_currkey->base[gv_currkey->prev]));
gv_currkey->end = gv_currkey->prev + 2;
gv_currkey->base[gv_currkey->end] = KEY_DELIMITER;
}
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end]);
} else
{ /* the following section is for $ZPREVIOUS(^gname) */
assert(2 <= gv_currkey->end);
assert(gv_currkey->end < (MAX_MIDENT_LEN + 2)); /* until names are not in midents */
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end]);
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end - 1]);
gd_targ = TREF(gd_targ_addr);
gd_map_start = gd_targ->maps;
map = gv_srch_map(gd_targ, (char *)&gv_currkey->base[0], gv_currkey->end - 1);
assert(map > (gd_map_start + 1));
/* If ^gname starts at "map" start search from map-1 since $ZPREVIOUS(^gname) is sought */
BACK_OFF_ONE_MAP_ENTRY_IF_EDGECASE(gv_currkey->base, gv_currkey->end - 1, map);
found = FALSE;
/* The first map entry corresponds to local locks. The second map entry does not contain any globals.
* Therefore, any search for globals needs to only look after these maps. Hence the "gd_map_start + 1" below.
*/
for ( ; map > gd_map_start + 1; map = prev_map)
{
prev_map = map - 1;
gv_cur_region = map->reg.addr;
if (!gv_cur_region->open)
gv_init_reg(gv_cur_region);
change_reg();
acc_meth = REG_ACC_METH(gv_cur_region);
/* search region, entries in directory tree could have empty GVT in which case move on to previous entry */
for ( ; ; )
{
assert(0 == gv_currkey->prev); /* or else gvcst_zprevious could get confused */
if ((dba_bg == acc_meth) || (dba_mm == acc_meth))
{
gv_target = cs_addrs->dir_tree;
found = gvcst_zprevious();
} else if (dba_cm == acc_meth)
found = gvcmx_zprevious();
else
found = gvusr_zprevious();
if ('#' == gv_altkey->base[0]) /* don't want to give any hidden ^#* global, e.g "^#t" */
found = FALSE;
if (!found)
break;
assert(1 < gv_altkey->end);
assert(gv_altkey->end < (MAX_MIDENT_LEN + 2)); /* until names are not in midents */
res = memcmp(gv_altkey->base, prev_map->gvkey.addr, gv_altkey->end);
assert((0 != res) || (gv_altkey->end <= prev_map->gvkey_len));
if (0 > res)
{ /* The global name we found is less than the maximum value in the previous map
* so this name is not part of the current map for sure. Move on to previous map.
*/
found = FALSE;
break;
}
gvname.var_name.addr = (char *)gv_altkey->base;
gvname.var_name.len = gv_altkey->end - 1;
if (dba_cm == acc_meth)
break;
COMPUTE_HASH_MNAME(&gvname);
GV_BIND_NAME_AND_ROOT_SEARCH(gd_targ, &gvname, gvnh_reg); /* updates "gv_currkey" */
assert((NULL != gvnh_reg->gvspan) || (gv_cur_region == map->reg.addr));
if (NULL != gvnh_reg->gvspan)
{ /* gv_target would NOT have been initialized by GV_BIND_NAME in this case.
* So finish that initialization.
*/
datamval = &tmpmval;
/* The below macro finishes the task of GV_BIND_NAME_AND_ROOT_SEARCH
* (e.g. setting gv_cur_region for spanning globals)
*/
GV_BIND_SUBSNAME_IF_GVSPAN(gvnh_reg, gd_targ, gv_currkey, gvnh_reg->gd_reg);
op_gvdata(datamval);
if (MV_FORCE_INT(datamval))
break;
} else
{ /* else gv_target->root would have been initialized by GV_BIND_NAME_AND_ROOT_SEARCH */
if ((0 != gv_target->root) && (0 != gvcst_data()))
break;
}
}
if (found)
break;
/* If previous map corresponding to a spanning global, then do not update gv_currkey as that would
* effectively cause the spanning global to be skipped. If gvkey_len == gvname_len + 1 it is NOT
* a spanning global map entry.
*/
assert(prev_map->gvkey_len >= (prev_map->gvname_len + 1));
if ((prev_map > (gd_map_start + 1)) && (prev_map->gvkey_len == (prev_map->gvname_len + 1)))
{
assert(strlen(prev_map->gvkey.addr) == prev_map->gvname_len);
gv_currkey->end = prev_map->gvname_len + 1;
assert(gv_currkey->end <= (MAX_MIDENT_LEN + 1));
memcpy(gv_currkey->base, prev_map->gvkey.addr, gv_currkey->end);
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end - 1]);
gv_currkey->base[gv_currkey->end] = KEY_DELIMITER;
assert(gv_currkey->top > gv_currkey->end); /* ensure we are within allocated bounds */
}
}
/* Reset gv_currkey as we have potentially skipped one or more regions so we no
* longer can expect gv_currkey/gv_cur_region/gv_target to match each other.
*/
gv_currkey->end = 0;
gv_currkey->base[0] = KEY_DELIMITER;
v->mvtype = 0; /* so stp_gcol (if invoked below) can free up space currently occupied (BYPASSOK)
* by this to-be-overwritten mval */
if (found)
{
if (!IS_STP_SPACE_AVAILABLE(gvname.var_name.len + 1))
{
v->str.len = 0; /* so stp_gcol ignores otherwise incompletely setup mval (BYPASSOK) */
INVOKE_STP_GCOL(gvname.var_name.len + 1);
}
v->str.addr = (char *)stringpool.free;
*stringpool.free++ = '^';
memcpy(stringpool.free, gvname.var_name.addr, gvname.var_name.len);
stringpool.free += gvname.var_name.len;
v->str.len = gvname.var_name.len + 1;
assert(v->str.addr < (char *)stringpool.top && v->str.addr >= (char *)stringpool.base);
assert(v->str.addr + v->str.len <= (char *)stringpool.top &&
v->str.addr + v->str.len >= (char *)stringpool.base);
} else
v->str.len = 0;
v->mvtype = MV_STR; /* initialize mvtype now that mval has been otherwise completely set up */
/* No need to restore gv_currkey (to what it was at function entry) as it is already set to NULL */
}
return;
}
void op_gvorder (mval *v)
{
int4 n;
gd_binding *map;
mstr name;
enum db_acc_method acc_meth;
boolean_t found, ok_to_change_currkey;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
acc_meth = gv_cur_region->dyn.addr->acc_meth;
/* Modify gv_currkey such that a gvcst_search of the resulting gv_currkey will find the next available subscript.
* But in case of dba_usr (the custom implementation of $ORDER which is overloaded for DDP but could be more in the
* future) it is better to hand over gv_currkey as it is so the custom implementation can decide what to do with it.
*/
ok_to_change_currkey = (dba_usr != acc_meth);
if (ok_to_change_currkey)
{ /* Modify gv_currkey to reflect the next possible key value in collating order */
if (!TREF(gv_last_subsc_null) || gv_cur_region->std_null_coll)
{
*(&gv_currkey->base[0] + gv_currkey->end - 1) = 1;
*(&gv_currkey->base[0] + gv_currkey->end + 1) = 0;
gv_currkey->end += 1;
} else
{
assert(STR_SUB_PREFIX == gv_currkey->base[gv_currkey->prev]);
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end]);
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end - 1]);
assert(2 == (gv_currkey->end - gv_currkey->prev));
*(&gv_currkey->base[0] + gv_currkey->prev) = 01;
}
}
if (gv_currkey->prev)
{
if (acc_meth == dba_bg || acc_meth == dba_mm)
{
if (gv_target->root == 0) /* global does not exist */
found = FALSE;
else
found = gvcst_order();
} else if (acc_meth == dba_cm)
found = gvcmx_order();
else
found = gvusr_order();
v->mvtype = 0; /* so stp_gcol (if invoked below) can free up space currently occupied by
* this to-be-overwritten mval */
if (found)
{
gv_altkey->prev = gv_currkey->prev;
if (!(IS_STP_SPACE_AVAILABLE(MAX_KEY_SZ)))
{
if (*(&gv_altkey->base[0] + gv_altkey->prev) != 0xFF)
n = MAX_FORM_NUM_SUBLEN;
else
{
n = gv_altkey->end - gv_altkey->prev;
assert (n > 0);
}
ENSURE_STP_FREE_SPACE(n);
}
v->str.addr = (char *)stringpool.free;
stringpool.free = gvsub2str (&gv_altkey->base[0] + gv_altkey->prev, stringpool.free, FALSE);
v->str.len = INTCAST((char *)stringpool.free - v->str.addr);
assert (v->str.addr < (char *)stringpool.top && v->str.addr >= (char *)stringpool.base);
assert (v->str.addr + v->str.len <= (char *)stringpool.top &&
v->str.addr + v->str.len >= (char *)stringpool.base);
} else
v->str.len = 0;
v->mvtype = MV_STR; /* initialize mvtype now that mval has been otherwise completely set up */
if (ok_to_change_currkey)
{ /* Restore gv_currkey to what it was at function entry time */
if (!TREF(gv_last_subsc_null) || gv_cur_region->std_null_coll)
{
assert(1 == gv_currkey->base[gv_currkey->end - 2]);
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end-1]);
assert(KEY_DELIMITER == gv_currkey->base[gv_currkey->end]);
gv_currkey->base[gv_currkey->end - 2] = KEY_DELIMITER;
gv_currkey->end--;
} else
{
assert(01 == gv_currkey->base[gv_currkey->prev]);
gv_currkey->base[gv_currkey->prev] = STR_SUB_PREFIX;
}
}
} else /* the following section is for $O(^gname) */
{
assert (2 < gv_currkey->end);
assert (gv_currkey->end < (MAX_MIDENT_LEN + 3)); /* until names are not in midents */
map = gd_map + 1;
while (map < gd_map_top &&
(memcmp(gv_currkey->base, map->name,
gv_currkey->end == (MAX_MIDENT_LEN + 2) ? MAX_MIDENT_LEN : gv_currkey->end - 1) >= 0))
{
map++;
}
for (; map < gd_map_top; ++map)
{
gv_cur_region = map->reg.addr;
if (!gv_cur_region->open)
gv_init_reg(gv_cur_region);
change_reg();
acc_meth = gv_cur_region->dyn.addr->acc_meth;
for (; ;) /* search region, entries in directory tree could be empty */
{
if (acc_meth == dba_bg || acc_meth == dba_mm)
{
gv_target = cs_addrs->dir_tree;
found = gvcst_order ();
} else if (acc_meth == dba_cm)
found = gvcmx_order ();
else
found = gvusr_order();
if (!found)
break;
assert (1 < gv_altkey->end);
assert (gv_altkey->end < (MAX_MIDENT_LEN + 2)); /* until names are not in midents */
if (memcmp(gv_altkey->base, map->name, gv_altkey->end - 1) > 0)
{
found = FALSE;
break;
}
name.addr = (char *)&gv_altkey->base[0];
name.len = gv_altkey->end - 1;
if (acc_meth == dba_cm)
break;
GV_BIND_NAME_AND_ROOT_SEARCH(gd_header, &name);
if (gv_cur_region != map->reg.addr)
{
found = FALSE;
break;
}
if ((gv_target->root != 0) && (gvcst_data() != 0))
break;
*(&gv_currkey->base[0] + gv_currkey->end - 1) = 1;
*(&gv_currkey->base[0] + gv_currkey->end + 1) = 0;
gv_currkey->end += 1;
}
if (found)
break;
else
{
assert(SIZEOF(map->name) == SIZEOF(mident_fixed));
gv_currkey->end = mid_len((mident_fixed *)map->name);
memcpy(&gv_currkey->base[0], map->name, gv_currkey->end);
gv_currkey->base[ gv_currkey->end - 1 ] -= 1;
gv_currkey->base[ gv_currkey->end ] = 0xFF; /* back off 1 spot from map */
gv_currkey->base[ gv_currkey->end + 1] = 0;
gv_currkey->base[ gv_currkey->end + 2] = 0;
gv_currkey->end += 2;
}
}
/* Reset gv_currkey as we have potentially skipped one or more regions so we no
* longer can expect gv_currkey/gv_cur_region/gv_target to match each other.
*/
gv_currkey->end = 0;
gv_currkey->base[0] = 0;
v->mvtype = 0; /* so stp_gcol (if invoked below) can free up space currently occupied by
* this to-be-overwritten mval */
if (found)
{
if (!IS_STP_SPACE_AVAILABLE(name.len + 1))
{
v->str.len = 0; /* so stp_gcol ignores otherwise incompletely setup mval */
INVOKE_STP_GCOL(name.len + 1);
}
#ifdef mips
/* the following line works around a tandem compiler bug. */
v->str.addr = (char *)0;
#endif
v->str.addr = (char *)stringpool.free;
*stringpool.free++ = '^';
memcpy (stringpool.free, name.addr, name.len);
stringpool.free += name.len;
v->str.len = name.len + 1;
assert (v->str.addr < (char *)stringpool.top && v->str.addr >= (char *)stringpool.base);
assert (v->str.addr + v->str.len <= (char *)stringpool.top &&
v->str.addr + v->str.len >= (char *)stringpool.base);
} else
v->str.len = 0;
v->mvtype = MV_STR; /* initialize mvtype now that mval has been otherwise completely set up */
}
return;
}
