/* Plus4-specific initialization. */
int machine_specific_init(void)
{
int delay;
plus4_log = log_open("Plus4");
if (mem_load() < 0) {
return -1;
}
event_init();
/* Setup trap handling. */
traps_init();
gfxoutput_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#endif
/* Initialize serial traps. */
if (serial_init(plus4_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa8);
serial_iec_bus_init();
rs232drv_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 2; /* default */
}
autostart_init((CLOCK)(delay * PLUS4_PAL_RFSH_PER_SEC * PLUS4_PAL_CYCLES_PER_RFSH), 1, 0, 0xc8, 0xca, -40);
/* Initialize the sidcart first */
sidcart_sound_chip_init();
/* Initialize native sound chip */
ted_sound_chip_init();
/* Initialize cartridge based sound chips */
digiblaster_sound_chip_init();
speech_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
#ifdef USE_BEOS_UI
/* Pre-init Plus4-specific parts of the menus before ted_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
plus4ui_init_early();
#endif
if (ted_init() == NULL) {
return -1;
}
acia_init();
#ifndef COMMON_KBD
if (plus4_kbd_init() < 0) {
return -1;
}
#endif
plus4_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize keyboard buffer. */
kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
if (!console_mode) {
plus4ui_init();
}
if (!video_disabled_mode) {
joystick_init();
}
cs256k_init();
h256k_init();
plus4iec_init();
machine_drive_stub();
/* Initialize the machine specific I/O */
plus4io_init();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("TEDFullscreen", 1);
}
}
#endif
return 0;
}
/* Plus4-specific initialization. */
int machine_specific_init(void)
{
int delay;
plus4_log = log_open("Plus4");
if (mem_load() < 0)
return -1;
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(plus4_serial_traps) < 0)
return -1;
serial_trap_init(0xa8);
serial_iec_bus_init();
rs232drv_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 2; /* default */
}
autostart_init((CLOCK)(delay * PLUS4_PAL_RFSH_PER_SEC
* PLUS4_PAL_CYCLES_PER_RFSH), 0, 0, 0xc8, 0xca, -40);
/* Initialize the sidcart first */
sidcart_sound_chip_init();
/* Initialize native sound chip */
ted_sound_chip_init();
/* Initialize cartridge based sound chips */
digiblaster_sound_chip_init();
speech_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
if (ted_init() == NULL) {
return -1;
}
acia_init();
#ifndef COMMON_KBD
if (plus4_kbd_init() < 0) {
return -1;
}
#endif
plus4_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize keyboard buffer. */
kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec
* machine_timing.cycles_per_rfsh));
plus4ui_init();
cs256k_init();
h256k_init();
plus4iec_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && \
(defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("TEDFullscreen", 1);
}
}
#endif
return 0;
}
/* Plus4-specific initialization. */
int machine_specific_init(void)
{
plus4_log = log_open("Plus4");
if (mem_load() < 0)
return -1;
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(plus4_serial_traps) < 0)
return -1;
serial_trap_init(0xa8);
serial_iec_bus_init();
rs232drv_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
autostart_init((CLOCK)(2 * PLUS4_PAL_RFSH_PER_SEC
* PLUS4_PAL_CYCLES_PER_RFSH), 0, 0, 0xc8, 0xca, -40);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
if (ted_init() == NULL)
return -1;
acia_init();
#ifndef COMMON_KBD
if (plus4_kbd_init() < 0)
return -1;
#endif
plus4_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize keyboard buffer. */
kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec
* machine_timing.cycles_per_rfsh));
plus4ui_init();
cs256k_init();
h256k_init();
plus4iec_init();
machine_drive_stub();
return 0;
}