Exemplos de h4_init em C++ (Cpp)

Exemplo n.º 1

Arquivo: hci_ldisc.c Projeto: CrysisLTU/Project-X5pro-Kernel-u8800pro

static int __init hci_uart_init(void)
{
	static struct tty_ldisc_ops hci_uart_ldisc;
	int err;

	BT_INFO("HCI UART driver ver %s", VERSION);

	/* Register the tty discipline */

	memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
	hci_uart_ldisc.magic		= TTY_LDISC_MAGIC;
	hci_uart_ldisc.name		= "n_hci";
	hci_uart_ldisc.open		= hci_uart_tty_open;
	hci_uart_ldisc.close		= hci_uart_tty_close;
	hci_uart_ldisc.read		= hci_uart_tty_read;
	hci_uart_ldisc.write		= hci_uart_tty_write;
	hci_uart_ldisc.ioctl		= hci_uart_tty_ioctl;
	hci_uart_ldisc.poll		= hci_uart_tty_poll;
	hci_uart_ldisc.receive_buf	= hci_uart_tty_receive;
	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
	hci_uart_ldisc.owner		= THIS_MODULE;

	if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
		BT_ERR("HCI line discipline registration failed. (%d)", err);
		return err;
	}

#ifdef CONFIG_BT_HCIUART_H4
	h4_init();
#endif
#ifdef CONFIG_BT_HCIUART_BCSP
	bcsp_init();
#endif
/* < DTS2012020604357 zhangyun 20120206 begin */
#if defined(CONFIG_BT_HCIUART_LL) && defined(HUAWEI_BT_BTLA_VER30)
	ll_init();
#endif

/*default without Huawei modification*/
#if defined(CONFIG_BT_HCIUART_LL) && (!defined(CONFIG_HUAWEI_KERNEL))
    ll_init();
#endif
/* DTS2012020604357 zhangyun 20120206 end > */
#ifdef CONFIG_BT_HCIUART_ATH3K
	ath_init();
#endif
/* < DTS2012020604357 zhangyun 20120206 begin */
#if defined(CONFIG_BT_HCIUART_IBS) && defined(HUAWEI_BT_BLUEZ_VER30)
	ibs_init();
#endif

/*default without Huawei modification*/
#if defined(CONFIG_BT_HCIUART_IBS) && (!defined(CONFIG_HUAWEI_KERNEL))
    ibs_init();
#endif
/* DTS2012020604357 zhangyun 20120206 end > */

	return 0;
}

Exemplo n.º 2

Arquivo: hci_ldisc.c Projeto: 020gzh/linux

static int __init hci_uart_init(void)
{
	static struct tty_ldisc_ops hci_uart_ldisc;
	int err;

	BT_INFO("HCI UART driver ver %s", VERSION);

	/* Register the tty discipline */

	memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
	hci_uart_ldisc.magic		= TTY_LDISC_MAGIC;
	hci_uart_ldisc.name		= "n_hci";
	hci_uart_ldisc.open		= hci_uart_tty_open;
	hci_uart_ldisc.close		= hci_uart_tty_close;
	hci_uart_ldisc.read		= hci_uart_tty_read;
	hci_uart_ldisc.write		= hci_uart_tty_write;
	hci_uart_ldisc.ioctl		= hci_uart_tty_ioctl;
	hci_uart_ldisc.poll		= hci_uart_tty_poll;
	hci_uart_ldisc.receive_buf	= hci_uart_tty_receive;
	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
	hci_uart_ldisc.owner		= THIS_MODULE;

	err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
	if (err) {
		BT_ERR("HCI line discipline registration failed. (%d)", err);
		return err;
	}

#ifdef CONFIG_BT_HCIUART_H4
	h4_init();
#endif
#ifdef CONFIG_BT_HCIUART_BCSP
	bcsp_init();
#endif
#ifdef CONFIG_BT_HCIUART_LL
	ll_init();
#endif
#ifdef CONFIG_BT_HCIUART_ATH3K
	ath_init();
#endif
#ifdef CONFIG_BT_HCIUART_3WIRE
	h5_init();
#endif
#ifdef CONFIG_BT_HCIUART_INTEL
	intel_init();
#endif
#ifdef CONFIG_BT_HCIUART_BCM
	bcm_init();
#endif
#ifdef CONFIG_BT_HCIUART_QCA
	qca_init();
#endif
#ifdef CONFIG_BT_HCIUART_AG6XX
	ag6xx_init();
#endif

	return 0;
}

Exemplo n.º 3

Arquivo: hci_ldisc.c Projeto: akuster/linux-meson

static int __init hci_uart_init(void)
{
	static struct tty_ldisc_ops hci_uart_ldisc;
	int err;

	BT_INFO("HCI UART driver ver %s", VERSION);

	/* Register the tty discipline */

	memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
	hci_uart_ldisc.magic		= TTY_LDISC_MAGIC;
	hci_uart_ldisc.name		= "n_hci";
	hci_uart_ldisc.open		= hci_uart_tty_open;
	hci_uart_ldisc.close		= hci_uart_tty_close;
	hci_uart_ldisc.read		= hci_uart_tty_read;
	hci_uart_ldisc.write		= hci_uart_tty_write;
	hci_uart_ldisc.ioctl		= hci_uart_tty_ioctl;
	hci_uart_ldisc.poll		= hci_uart_tty_poll;
	hci_uart_ldisc.receive_buf	= hci_uart_tty_receive;
	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
	hci_uart_ldisc.owner		= THIS_MODULE;

	if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
		BT_ERR("HCI line discipline registration failed. (%d)", err);
		return err;
	}

#ifdef CONFIG_BT_HCIUART_H4
	h4_init();
#endif
/*
#ifdef CONFIG_BT_HCIUART_BCSP
	bcsp_init();
#endif
#ifdef CONFIG_BT_HCIUART_LL
	ll_init();
#endif
#ifdef CONFIG_BT_HCIUART_ATH3K
	ath_init();
#endif
*/

//Realtek_add_start	
//add realtek h5 support	
//#ifdef CONFIG_BT_HCIUART_RTKH5
	h5_init();
//#endif
//Realtek_add_end

#ifdef BTCOEX
	rtk_uart_coex_init();
#endif

	return 0;
}

Exemplo n.º 4

Arquivo: hci_ldisc.c Projeto: kurainooni/rk30-kernel

static int __init hci_uart_init(void)
{
	static struct tty_ldisc_ops hci_uart_ldisc;
	int err;

	BT_INFO("HCI UART driver ver %s", VERSION);

#if defined(CONFIG_MT5931_MT6622)
	wake_lock_init(&bt_wake_lock, WAKE_LOCK_SUSPEND, "bt");
#endif
	/* Register the tty discipline */

	memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
	hci_uart_ldisc.magic		= TTY_LDISC_MAGIC;
	hci_uart_ldisc.name		= "n_hci";
	hci_uart_ldisc.open		= hci_uart_tty_open;
	hci_uart_ldisc.close		= hci_uart_tty_close;
	hci_uart_ldisc.read		= hci_uart_tty_read;
	hci_uart_ldisc.write		= hci_uart_tty_write;
	hci_uart_ldisc.ioctl		= hci_uart_tty_ioctl;
	hci_uart_ldisc.poll		= hci_uart_tty_poll;
	hci_uart_ldisc.receive_buf	= hci_uart_tty_receive;
	hci_uart_ldisc.write_wakeup	= hci_uart_tty_wakeup;
	hci_uart_ldisc.owner		= THIS_MODULE;

	if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
		BT_ERR("HCI line discipline registration failed. (%d)", err);
		return err;
	}

#ifdef CONFIG_BT_HCIUART_H4
	h4_init();
#endif
#ifdef CONFIG_BT_HCIUART_BCSP
	bcsp_init();
#endif
#ifdef CONFIG_BT_HCIUART_LL
	ll_init();
#endif
#ifdef CONFIG_BT_HCIUART_ATH3K
	ath_init();
#endif

	return 0;
}

Exemplo n.º 5

Arquivo: hci_ldisc.c Projeto: LucidOne/Rovio

int hci_uart_init(void)
{
	static struct tty_ldisc hci_uart_ldisc;
	int err;

	//BT_INFO
	diag_printf("BlueZ HCI UART driver ver %s Copyright (C) 2000,2001 Qualcomm Inc\n", 
		VERSION);
	diag_printf("Written 2000,2001 by Maxim Krasnyansky <*****@*****.**>\n");

	/* Register the tty discipline */

	memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
	hci_uart_ldisc.magic       = 0;//TTY_LDISC_MAGIC;
	hci_uart_ldisc.name        = "n_hci";
	hci_uart_ldisc.open        = hci_uart_tty_open;
	hci_uart_ldisc.close       = hci_uart_tty_close;
	hci_uart_ldisc.read        = hci_uart_tty_read;
	hci_uart_ldisc.write       = hci_uart_tty_write;
	hci_uart_ldisc.ioctl       = hci_uart_tty_ioctl;
//	hci_uart_ldisc.poll        = hci_uart_tty_poll;
	hci_uart_ldisc.receive_room= hci_uart_tty_room;
	hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
	hci_uart_ldisc.write_wakeup= hci_uart_tty_wakeup;

	if ((err = serial_register_ldisc(&hci_uart_ldisc))) {
		//BT_ERR
		printf("Can't register HCI line discipline (%d)\n", err);
		return err;
	}

#ifdef CONFIG_BLUEZ_HCIUART_H4
	h4_init();
#endif
#ifdef CONFIG_BLUEZ_HCIUART_BCSP
	bcsp_init();
#endif
	
	return 0;
}