static GdkFilterReturn
popup_filter (GdkXEvent *gdk_xevent,
GdkEvent *event,
GtkWidget *popup)
{
XEvent *xevent = (XEvent *) gdk_xevent;
XIEvent *xiev;
XIDeviceEvent *xidev;
switch (xevent->type) {
case ButtonPress:
handle_button_press_event (popup, xevent->xbutton.display, xevent->xbutton.subwindow);
return GDK_FILTER_REMOVE;
case KeyPress:
if (xevent->xkey.keycode == XKeysymToKeycode (xevent->xany.display, XK_Escape)) {
remove_popup (popup);
return GDK_FILTER_REMOVE;
}
break;
case GenericEvent:
xiev = (XIEvent *) xevent->xcookie.data;
xidev = (XIDeviceEvent *) xiev;
switch (xiev->evtype) {
case XI_KeyPress:
if (xidev->detail == XKeysymToKeycode (xevent->xany.display, XK_Escape)) {
remove_popup (popup);
return GDK_FILTER_REMOVE;
}
break;
case XI_ButtonPress:
handle_button_press_event (popup, xidev->display, xidev->child);
return GDK_FILTER_REMOVE;
}
break;
default:
break;
}
return GDK_FILTER_CONTINUE;
}
static GdkFilterReturn
popup_filter (GdkXEvent *gdk_xevent,
GdkEvent *event,
GtkWidget *popup)
{
XEvent *xevent = (XEvent *) gdk_xevent;
switch (xevent->type) {
case ButtonPress:
handle_button_press_event (popup, &xevent->xkey);
return GDK_FILTER_REMOVE;
case KeyPress:
if (xevent->xkey.keycode == XKeysymToKeycode (xevent->xany.display, XK_Escape)) {
remove_popup (popup);
return GDK_FILTER_REMOVE;
}
break;
default:
break;
}
return GDK_FILTER_CONTINUE;
}
static void interrupt_event_handler(void *data)
{
struct event_info *info = data;
struct slot *p_slot = info->p_slot;
mutex_lock(&p_slot->lock);
switch (info->event_type) {
case INT_BUTTON_PRESS:
handle_button_press_event(p_slot);
break;
case INT_POWER_FAULT:
dbg("%s: power fault\n", __FUNCTION__);
p_slot->hpc_ops->set_attention_status(p_slot, 1);
p_slot->hpc_ops->green_led_off(p_slot);
break;
default:
update_slot_info(p_slot);
break;
}
mutex_unlock(&p_slot->lock);
kfree(info);
}
void Task_SmartPHTApp(void)
{
message_t msg;
adc_voltages_t *v;
sensor_data_t *c;
byte_t comRecvByte;
if (knl_mailbox_pend(&taskMailbox, &msg) == RV_OK) {
switch (msg.MsgId) {
case MSG_ID_SYS_VOLTAGE_UPDATE:
v = (adc_voltages_t*) msg.Param0;
//tiny_printf("SYS: Vbat=%dmV, Vcc=%dmV, Vdd=%dmV, Vtft=%dmV\n", v->vbat, v->vcc, v->vdd, v->vtft);
// if(v->vdd < 3000)
// tty_output("SYS: system voltage is low!\n");
// if(v->vbat < 3300)
// tty_output("SYS: BATTERY LOW! replace or battery can be damaged\n");
break;
case MSG_ID_SYS_BATTERY_STAT:
// if(msg.Param0 == BAT_CHARGE_COMPLETE)
// tty_output("SYS: battery charge complete.\n");
// if(msg.Param0 == BAT_CHARGING)
// tty_output("SYS: charging...\n");
// if(msg.Param0 == BAT_SHUTDOWN)
// tty_output("SYS: charger shtdn.\n");
// break;
break;
case MSG_ID_USB_STATE_CHANGED:
handle_usb_change(msg.Param0);
break;
case MSG_ID_SENSOR_UPDATE:
c = (sensor_data_t*) msg.Param0;
filter(&dashboardData.pressure, c->compensated.hp_pressure);
filter(&dashboardData.humidity, c->compensated.sht_humidity);
filter(&dashboardData.temperature, c->compensated.sht_temperature);
update_min_max(&dashboardData.pressure);
update_min_max(&dashboardData.humidity);
update_min_max(&dashboardData.temperature);
check_alarms();
// update waveforms
wfrm_put_sample(&wfrmPressure, dashboardData.pressure.val);
wfrm_put_sample(&wfrmHumidity, dashboardData.humidity.val);
wfrm_put_sample(&wfrmTemperature, dashboardData.temperature.val);
// Write to file
write_samples_to_file(c, (rtc_time_t*) msg.Param1);
gui_invalidate(&dashb);
gui_invalidate(&lineplot);
break;
case MSG_ID_MEDIA_DETECTED:
//tty_output("SDCARD: inserted.");
//if(msg.Param0) tty_output(" Card is write protected!");
//tty_output("\n");
sd_register();
f_close(&samplesFile);
// Mount filesystem
f_mount(0, &filesystem);
// Try open file;
sampleFileIsOpen = try_open_file();
// Change statusbar
toolbar_set_status(&statusbar, STATUS_SDCARD_PRESENT);
break;
case MSG_ID_MEDIA_DISAPPEARED:
//tty_output("SDCARD: removed\n");
// Dismount file system
f_mount(0, NULL);
// Change statusbar
toolbar_clear_status(&statusbar, STATUS_SDCARD_PRESENT);
break;
case MSG_ID_WDG_PRESSED:
handle_button_press_event(msg.Param0);
break;
case MSG_ID_WDG_DELAYED_OP:
handle_delayed_operation_event(msg.Param0);
break;
case MSG_ID_WDG_CHECKED:
handle_button_checked_event(msg.Param0);
break;
case MSG_ID_WDG_INVALIDATE: // GUI needs to be redrawn
gui_draw();
break;
case MSG_ID_LPM_REQUEST:
enter_sleep_mode();
break;
case MSG_ID_TOUCH_EVENT:
// // Draw cursor
// if(msg.Param0 == TOUCH_EVENT_PANEL_PRESSED)
// {
// uint16_t i, j;
// i = msg.Param1;
// j = msg.Param2;
//
// if(i < 12) i = 12;
// else if(i > 467) i = 467;
// if(j < 12) j = 12;
// else if(j > 260) j = 260;
//
// gfx_set_color(COLOR_WHITE);
// gfx_draw_circle(i, j , 10);
// }
if(!darkenScreen)
{
set_brightness(lightenBrightness);
}
darkenScreen = bTrue;
// no break, gui must get this msg too
default:
gui_msg(&msg);
break;
}
}
// COMMAND PARSER
if(usb_device_state == CONFIGURED_STATE)
if (poll_getc_cdc(&comRecvByte)) {
putc_cdc(comRecvByte); // echo
CDC_Flush_In_Now();
cmd_parse_char(comRecvByte);
}
}
