static void __devexit prism2sta_remove_plx(struct pci_dev *pdev)
{
wlandevice_t *wlandev;
hfa384x_t *hw;
wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
hw = wlandev->priv;
p80211netdev_hwremoved(wlandev);
/* reset hardware */
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
if (pdev->irq)
free_irq(pdev->irq, wlandev);
unregister_wlandev(wlandev);
/* free local stuff */
if (hw) {
hfa384x_destroy(hw);
kfree(hw);
}
iounmap((void __iomem *)wlandev->netdev->mem_start);
wlan_unsetup(wlandev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
kfree(wlandev);
}
static int prism2sta_resume(struct usb_interface *interface)
{
int result = 0;
hfa384x_t *hw = NULL;
wlandevice_t *wlandev;
wlandev = (wlandevice_t *)usb_get_intfdata(interface);
if (!wlandev)
return -ENODEV;
hw = wlandev->priv;
if (!hw)
return -ENODEV;
/* Do a chip-level reset on the MAC */
if (prism2_doreset) {
result = hfa384x_corereset(hw,
prism2_reset_holdtime,
prism2_reset_settletime, 0);
if (result != 0) {
unregister_wlandev(wlandev);
hfa384x_destroy(hw);
dev_err(&interface->dev, "hfa384x_corereset() failed.\n");
kfree(wlandev);
kfree(hw);
wlandev = NULL;
return -ENODEV;
}
}
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_enable);
return 0;
}
static void prism2_cs_remove(struct pcmcia_device *pdev)
{
struct wlandevice *wlandev;
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
dev_link_t *link = dev_to_instance(pdev);
#endif
DBFENTER;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
wlandev = pdev->priv;
#else
wlandev = link->priv;
#endif
if (wlandev) {
p80211netdev_hwremoved(wlandev);
unregister_wlandev(wlandev);
wlan_unsetup(wlandev);
if (wlandev->priv) {
hfa384x_t *hw = wlandev->priv;
wlandev->priv = NULL;
if (hw) {
hfa384x_destroy(hw);
kfree(hw);
}
}
kfree(wlandev);
}
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->priv = NULL;
pcmcia_disable_device(pdev);
#else
if (link->state & DEV_CONFIG) {
if (link->win)
pcmcia_release_window(link->win);
pcmcia_release_configuration(link->handle);
if (link->io.NumPorts1)
pcmcia_release_io(link->handle, &link->io);
if (link->irq.AssignedIRQ)
pcmcia_release_irq(link->handle, &link->irq);
link->state &= ~DEV_CONFIG;
}
link->priv = NULL;
kfree(link);
#endif
DBFEXIT;
return;
}
/*----------------------------------------------------------------
* prism2sta_detach
*
* Remove one of the device instances managed by this driver.
* Search the list for the given instance,
* check our flags for a waiting timer'd release call
* call release
* Deregister the instance with Card Services
* (netdevice) unregister the network device.
* unlink the instance from the list
* free the link, priv, and priv->priv memory
* Note: the dev_list variable is a driver scoped static used to
* maintain a list of device instances managed by this
* driver.
*
* Arguments:
* link ptr to the instance to detach
*
* Returns:
* nothing
*
* Side effects:
* the link structure is gone, the netdevice is gone
*
* Call context:
* Might be interrupt, don't block.
----------------------------------------------------------------*/
void prism2sta_detach(dev_link_t *link)
{
dev_link_t **linkp;
wlandevice_t *wlandev;
hfa384x_t *hw;
DBFENTER;
/* Locate prev device structure */
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
if (*linkp == link) break;
}
if (*linkp != NULL) {
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
unsigned long flags;
/* Get rid of any timer'd release call */
save_flags(flags);
cli();
#endif
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
if (link->state & DEV_RELEASE_PENDING) {
del_timer_sync(&link->release);
link->state &= ~DEV_RELEASE_PENDING;
}
#endif
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
restore_flags(flags);
#endif
/* If link says we're still config'd, call release */
if (link->state & DEV_CONFIG) {
prism2sta_release((u_long)link);
if (link->state & DEV_STALE_CONFIG) {
link->state |= DEV_STALE_LINK;
return;
}
}
/* Tell Card Services we're not around any more */
if (link->handle) {
pcmcia_deregister_client(link->handle);
}
/* Unlink device structure, free bits */
*linkp = link->next;
if ( link->priv != NULL ) {
wlandev = (wlandevice_t*)link->priv;
p80211netdev_hwremoved(wlandev);
if (link->dev != NULL) {
unregister_wlandev(wlandev);
}
wlan_unsetup(wlandev);
if (wlandev->priv) {
hw = wlandev->priv;
wlandev->priv = NULL;
if (hw) {
hfa384x_destroy(hw);
kfree(hw);
}
}
link->priv = NULL;
kfree(wlandev);
}
kfree(link);
}
DBFEXIT;
return;
}
static int prism2_cs_probe(struct pcmcia_device *pdev)
{
int rval = 0;
struct wlandevice *wlandev = NULL;
hfa384x_t *hw = NULL;
config_info_t socketconf;
cisparse_t *parse = NULL;
tuple_t tuple;
uint8_t buf[64];
int last_fn, last_ret;
cistpl_cftable_entry_t dflt = { 0 };
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
dev_link_t *link;
#endif
DBFENTER;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
/* Set up interrupt type */
pdev->conf.IntType = INT_MEMORY_AND_IO;
#else
link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
if (link == NULL)
return -ENOMEM;
memset(link, 0, sizeof(dev_link_t));
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = pdev;
pdev->instance = link;
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
#endif
// VCC crap?
parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
wlandev = create_wlan();
if (!wlandev || !parse) {
WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
rval = -EIO;
goto failed;
}
hw = wlandev->priv;
if ( wlan_setup(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
rval = -EIO;
goto failed;
}
/* Initialize the hw struct for now */
hfa384x_create(hw, 0, 0, NULL);
hw->wlandev = wlandev;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
hw->pdev = pdev;
pdev->priv = wlandev;
#else
hw->link = link;
link->priv = wlandev;
#endif
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(pdev, &tuple));
CS_CHECK(ParseTuple, pcmcia_parse_tuple(pdev, &tuple, parse));
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->conf.ConfigBase = parse->config.base;
pdev->conf.Present = parse->config.rmask[0];
#else
link->conf.ConfigBase = parse->config.base;
link->conf.Present = parse->config.rmask[0];
link->conf.Vcc = socketconf.Vcc;
#endif
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(pdev, &socketconf));
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
for (;;) {
cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
CFG_CHECK(GetTupleData,
pcmcia_get_tuple_data(pdev, &tuple));
CFG_CHECK(ParseTuple,
pcmcia_parse_tuple(pdev, &tuple, parse));
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->conf.ConfigIndex = cfg->index;
#else
link->conf.ConfigIndex = cfg->index;
#endif
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->conf.Attributes |= CONF_ENABLE_SPKR;
pdev->conf.Status = CCSR_AUDIO_ENA;
#else
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
#endif
}
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (socketconf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
10000 && !prism2_ignorevcc) {
WLAN_LOG_DEBUG(1, " Vcc mismatch - skipping"
" this entry\n");
goto next_entry;
}
} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (socketconf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
10000 && !prism2_ignorevcc) {
WLAN_LOG_DEBUG(1, " Vcc (default) mismatch "
"- skipping this entry\n");
goto next_entry;
}
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
#else
link->conf.Vpp1 = link->conf.Vpp2 =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
#endif
} else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
#else
link->conf.Vpp1 = link->conf.Vpp2 =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
#endif
}
/* Do we need to allocate an interrupt? */
/* HACK: due to a bad CIS....we ALWAYS need an interrupt */
/* if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->conf.Attributes |= CONF_ENABLE_IRQ;
#else
link->conf.Attributes |= CONF_ENABLE_IRQ;
#endif
/* IO window settings */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->io.NumPorts1 = pdev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
pdev->io.BasePort1 = io->win[0].base;
if ( pdev->io.BasePort1 != 0 ) {
WLAN_LOG_WARNING(
"Brain damaged CIS: hard coded iobase="
"0x%x, try letting pcmcia_cs decide...\n",
pdev->io.BasePort1 );
pdev->io.BasePort1 = 0;
}
pdev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
pdev->io.Attributes2 = pdev->io.Attributes1;
pdev->io.BasePort2 = io->win[1].base;
pdev->io.NumPorts2 = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
CFG_CHECK(RequestIO, pcmcia_request_io(pdev, &pdev->io));
#else
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.BasePort1 = io->win[0].base;
if ( link->io.BasePort1 != 0 ) {
WLAN_LOG_WARNING(
"Brain damaged CIS: hard coded iobase="
"0x%x, try letting pcmcia_cs decide...\n",
link->io.BasePort1 );
link->io.BasePort1 = 0;
}
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
CFG_CHECK(RequestIO, pcmcia_request_io(pdev, &link->io));
#endif
/* If we got this far, we're cool! */
break;
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
}
/* Let pcmcia know the device name */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->dev_node = &hw->node;
#else
link->dev = &hw->node;
#endif
/* Register the network device and get assigned a name */
SET_MODULE_OWNER(wlandev->netdev);
SET_NETDEV_DEV(wlandev->netdev, &handle_to_dev(pdev));
if (register_wlandev(wlandev) != 0) {
WLAN_LOG_NOTICE("prism2sta_cs: register_wlandev() failed.\n");
goto failed;
}
strcpy(hw->node.dev_name, wlandev->name);
/* Allocate an interrupt line. Note that this does not assign a */
/* handler to the interrupt, unless the 'Handler' member of the */
/* irq structure is initialized. */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
if (pdev->conf.Attributes & CONF_ENABLE_IRQ) {
pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
pdev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
pdev->irq.Handler = hfa384x_interrupt;
pdev->irq.Instance = wlandev;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
}
#else
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
link->irq.Handler = hfa384x_interrupt;
link->irq.Instance = wlandev;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &link->irq));
}
#endif
/* This actually configures the PCMCIA socket -- setting up */
/* the I/O windows and the interrupt mapping, and putting the */
/* card and host interface into "Memory and IO" mode. */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
#else
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &link->conf));
#endif
/* Fill the netdevice with this info */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
wlandev->netdev->irq = pdev->irq.AssignedIRQ;
wlandev->netdev->base_addr = pdev->io.BasePort1;
#else
wlandev->netdev->irq = link->irq.AssignedIRQ;
wlandev->netdev->base_addr = link->io.BasePort1;
#endif
/* And the rest of the hw structure */
hw->irq = wlandev->netdev->irq;
hw->iobase = wlandev->netdev->base_addr;
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
link->state |= DEV_CONFIG;
link->state &= ~DEV_CONFIG_PENDING;
#endif
/* And now we're done! */
wlandev->msdstate = WLAN_MSD_HWPRESENT;
goto done;
cs_failed:
cs_error(pdev, last_fn, last_ret);
failed:
// wlandev, hw, etc etc..
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
pdev->priv = NULL;
#else
pdev->instance = NULL;
if (link) {
link->priv = NULL;
kfree(link);
}
#endif
if (wlandev) {
wlan_unsetup(wlandev);
if (wlandev->priv) {
hw = wlandev->priv;
wlandev->priv = NULL;
if (hw) {
hfa384x_destroy(hw);
kfree(hw);
}
}
kfree(wlandev);
}
done:
if (parse) kfree(parse);
DBFEXIT;
return rval;
}
/*----------------------------------------------------------------
* prism2sta_probe_plx
*
* Probe routine called when a PCI device w/ matching ID is found.
* This PLX implementation uses the following map:
* BAR0: Unused
* BAR1: ????
* BAR2: PCMCIA attribute memory
* BAR3: PCMCIA i/o space
* Here's the sequence:
* - Allocate the PCI resources.
* - Read the PCMCIA attribute memory to make sure we have a WLAN card
* - Reset the MAC using the PCMCIA COR
* - Initialize the netdev and wlan data
* - Initialize the MAC
*
* Arguments:
* pdev ptr to pci device structure containing info about
* pci configuration.
* id ptr to the device id entry that matched this device.
*
* Returns:
* zero - success
* negative - failed
*
* Side effects:
*
*
* Call context:
* process thread
*
----------------------------------------------------------------*/
static int __devinit
prism2sta_probe_plx(
struct pci_dev *pdev,
const struct pci_device_id *id)
{
int result;
phys_t pccard_ioaddr;
phys_t pccard_attr_mem;
unsigned int pccard_attr_len;
void __iomem *attr_mem = NULL;
UINT32 plx_addr;
wlandevice_t *wlandev = NULL;
hfa384x_t *hw = NULL;
int reg;
u32 regic;
if (pci_enable_device(pdev))
return -EIO;
/* TMC7160 boards are special */
if ((pdev->vendor == PCIVENDOR_NDC) &&
(pdev->device == PCIDEVICE_NCP130_ASIC)) {
unsigned long delay;
pccard_attr_mem = 0;
pccard_ioaddr = pci_resource_start(pdev, 1);
outb(0x45, pccard_ioaddr);
delay = jiffies + 1*HZ;
while (time_before(jiffies, delay));
if (inb(pccard_ioaddr) != 0x45) {
WLAN_LOG_ERROR("Initialize the TMC7160 failed. (0x%x)\n", inb(pccard_ioaddr));
return -EIO;
}
pccard_ioaddr = pci_resource_start(pdev, 2);
prism2_doreset = 0;
WLAN_LOG_INFO("NDC NCP130 with TMC716(ASIC) PCI interface device found at io:0x%x, irq:%d\n", pccard_ioaddr, pdev->irq);
goto init;
}
/* Collect the resource requirements */
pccard_attr_mem = pci_resource_start(pdev, 2);
pccard_attr_len = pci_resource_len(pdev, 2);
if (pccard_attr_len < PLX_MIN_ATTR_LEN)
return -EIO;
pccard_ioaddr = pci_resource_start(pdev, 3);
/* bjoern: We need to tell the card to enable interrupts, in
* case the serial eprom didn't do this already. See the
* PLX9052 data book, p8-1 and 8-24 for reference.
* [MSM]: This bit of code came from the orinoco_cs driver.
*/
plx_addr = pci_resource_start(pdev, 1);
regic = 0;
regic = inl(plx_addr+PLX_INTCSR);
if(regic & PLX_INTCSR_INTEN) {
WLAN_LOG_DEBUG(1,
"%s: Local Interrupt already enabled\n", dev_info);
} else {
regic |= PLX_INTCSR_INTEN;
outl(regic, plx_addr+PLX_INTCSR);
regic = inl(plx_addr+PLX_INTCSR);
if(!(regic & PLX_INTCSR_INTEN)) {
WLAN_LOG_ERROR(
"%s: Couldn't enable Local Interrupts\n",
dev_info);
return -EIO;
}
}
/* These assignments are here in case of future mappings for
* io space and irq that might be similar to ioremap
*/
if (!request_mem_region(pccard_attr_mem, pci_resource_len(pdev, 2), "Prism2")) {
WLAN_LOG_ERROR("%s: Couldn't reserve PCI memory region\n", dev_info);
return -EIO;
}
attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
WLAN_LOG_INFO("A PLX PCI/PCMCIA interface device found, "
"phymem:0x%llx, phyio=0x%x, irq:%d, "
"mem: 0x%lx\n",
(unsigned long long)pccard_attr_mem, pccard_ioaddr, pdev->irq,
(unsigned long)attr_mem);
/* Verify whether PC card is present.
* [MSM] This needs improvement, the right thing to do is
* probably to walk the CIS looking for the vendor and product
* IDs. It would be nice if this could be tied in with the
* etc/pcmcia/wlan-ng.conf file. Any volunteers? ;-)
*/
if (
readb(attr_mem + 0) != 0x01 || readb(attr_mem + 2) != 0x03 ||
readb(attr_mem + 4) != 0x00 || readb(attr_mem + 6) != 0x00 ||
readb(attr_mem + 8) != 0xFF || readb(attr_mem + 10) != 0x17 ||
readb(attr_mem + 12) != 0x04 || readb(attr_mem + 14) != 0x67) {
WLAN_LOG_ERROR("Prism2 PC card CIS is invalid.\n");
return -EIO;
}
WLAN_LOG_INFO("A PCMCIA WLAN adapter was found.\n");
/* Write COR to enable PC card */
writeb(COR_VALUE, attr_mem + COR_OFFSET);
reg = readb(attr_mem + COR_OFFSET);
init:
/*
* Now do everything the same as a PCI device
* [MSM] TODO: We could probably factor this out of pcmcia/pci/plx
* and perhaps usb. Perhaps a task for another day.......
*/
if ((wlandev = create_wlan()) == NULL) {
WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
result = -EIO;
goto failed;
}
hw = wlandev->priv;
if ( wlan_setup(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
result = -EIO;
goto failed;
}
/* Setup netdevice's ability to report resources
* Note: the netdevice was allocated by wlan_setup()
*/
wlandev->netdev->irq = pdev->irq;
wlandev->netdev->base_addr = pccard_ioaddr;
wlandev->netdev->mem_start = (unsigned long)attr_mem;
wlandev->netdev->mem_end = (unsigned long)attr_mem + pci_resource_len(pdev, 0);
/* Initialize the hw data */
hfa384x_create(hw, wlandev->netdev->irq, pccard_ioaddr, attr_mem);
hw->wlandev = wlandev;
/* Register the wlandev, this gets us a name and registers the
* linux netdevice.
*/
SET_MODULE_OWNER(wlandev->netdev);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
#endif
if ( register_wlandev(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
result = -EIO;
goto failed;
}
#if 0
/* TODO: Move this and an irq test into an hfa384x_testif() routine.
*/
outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
if ( reg != PRISM2STA_MAGIC ) {
WLAN_LOG_ERROR("MAC register access test failed!\n");
result = -EIO;
goto failed;
}
#endif
/* Do a chip-level reset on the MAC */
if (prism2_doreset) {
result = hfa384x_corereset(hw,
prism2_reset_holdtime,
prism2_reset_settletime, 0);
if (result != 0) {
unregister_wlandev(wlandev);
hfa384x_destroy(hw);
WLAN_LOG_ERROR(
"%s: hfa384x_corereset() failed.\n",
dev_info);
result = -EIO;
goto failed;
}
}
pci_set_drvdata(pdev, wlandev);
/* Shouldn't actually hook up the IRQ until we
* _know_ things are alright. A test routine would help.
*/
request_irq(wlandev->netdev->irq, hfa384x_interrupt,
SA_SHIRQ, wlandev->name, wlandev);
wlandev->msdstate = WLAN_MSD_HWPRESENT;
result = 0;
goto done;
failed:
pci_set_drvdata(pdev, NULL);
if (wlandev) kfree(wlandev);
if (hw) kfree(hw);
if (attr_mem) iounmap(attr_mem);
pci_release_regions(pdev);
pci_disable_device(pdev);
done:
DBFEXIT;
return result;
}
static void prism2sta_disconnect_usb(struct usb_interface *interface)
{
wlandevice_t *wlandev;
wlandev = (wlandevice_t *)usb_get_intfdata(interface);
if (wlandev != NULL) {
LIST_HEAD(cleanlist);
hfa384x_usbctlx_t *ctlx, *temp;
unsigned long flags;
hfa384x_t *hw = wlandev->priv;
if (!hw)
goto exit;
spin_lock_irqsave(&hw->ctlxq.lock, flags);
p80211netdev_hwremoved(wlandev);
list_splice_init(&hw->ctlxq.reapable, &cleanlist);
list_splice_init(&hw->ctlxq.completing, &cleanlist);
list_splice_init(&hw->ctlxq.pending, &cleanlist);
list_splice_init(&hw->ctlxq.active, &cleanlist);
spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
/* There's no hardware to shutdown, but the driver
* might have some tasks or tasklets that must be
* stopped before we can tear everything down.
*/
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
del_singleshot_timer_sync(&hw->throttle);
del_singleshot_timer_sync(&hw->reqtimer);
del_singleshot_timer_sync(&hw->resptimer);
/* Unlink all the URBs. This "removes the wheels"
* from the entire CTLX handling mechanism.
*/
usb_kill_urb(&hw->rx_urb);
usb_kill_urb(&hw->tx_urb);
usb_kill_urb(&hw->ctlx_urb);
tasklet_kill(&hw->completion_bh);
tasklet_kill(&hw->reaper_bh);
cancel_work_sync(&hw->link_bh);
cancel_work_sync(&hw->commsqual_bh);
/* Now we complete any outstanding commands
* and tell everyone who is waiting for their
* responses that we have shut down.
*/
list_for_each_entry(ctlx, &cleanlist, list)
complete(&ctlx->done);
/* Give any outstanding synchronous commands
* a chance to complete. All they need to do
* is "wake up", so that's easy.
* (I'd like a better way to do this, really.)
*/
msleep(100);
/* Now delete the CTLXs, because no-one else can now. */
list_for_each_entry_safe(ctlx, temp, &cleanlist, list)
kfree(ctlx);
/* Unhook the wlandev */
unregister_wlandev(wlandev);
wlan_unsetup(wlandev);
usb_put_dev(hw->usb);
hfa384x_destroy(hw);
kfree(hw);
kfree(wlandev);
}
exit:
usb_set_intfdata(interface, NULL);
}
/*----------------------------------------------------------------
* prism2sta_probe_pci
*
* Probe routine called when a PCI device w/ matching ID is found.
* The ISL3874 implementation uses the following map:
* BAR0: Prism2.x registers memory mapped, size=4k
* Here's the sequence:
* - Allocate the PCI resources.
* - Read the PCMCIA attribute memory to make sure we have a WLAN card
* - Reset the MAC
* - Initialize the netdev and wlan data
* - Initialize the MAC
*
* Arguments:
* pdev ptr to pci device structure containing info about
* pci configuration.
* id ptr to the device id entry that matched this device.
*
* Returns:
* zero - success
* negative - failed
*
* Side effects:
*
*
* Call context:
* process thread
*
----------------------------------------------------------------*/
static int __devinit
prism2sta_probe_pci(
struct pci_dev *pdev,
const struct pci_device_id *id)
{
int result;
phys_t phymem = 0;
void *mem = NULL;
wlandevice_t *wlandev = NULL;
hfa384x_t *hw = NULL;
DBFENTER;
/* Enable the pci device */
if (pci_enable_device(pdev)) {
WLAN_LOG_ERROR("%s: pci_enable_device() failed.\n", dev_info);
result = -EIO;
goto fail;
}
/* Figure out our resources */
phymem = pci_resource_start(pdev, 0);
if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) {
printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n");
result = -EIO;
goto fail;
}
mem = ioremap(phymem, PCI_SIZE);
if ( mem == 0 ) {
WLAN_LOG_ERROR("%s: ioremap() failed.\n", dev_info);
result = -EIO;
goto fail;
}
/* Log the device */
WLAN_LOG_INFO("A Prism2.5 PCI device found, "
"phymem:0x%llx, irq:%d, mem:0x%p\n",
(unsigned long long)phymem, pdev->irq, mem);
if ((wlandev = create_wlan()) == NULL) {
WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
result = -EIO;
goto fail;
}
hw = wlandev->priv;
if ( wlan_setup(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
result = -EIO;
goto fail;
}
/* Setup netdevice's ability to report resources
* Note: the netdevice was allocated by wlan_setup()
*/
wlandev->netdev->irq = pdev->irq;
wlandev->netdev->mem_start = (unsigned long) mem;
wlandev->netdev->mem_end = wlandev->netdev->mem_start +
pci_resource_len(pdev, 0);
/* Register the wlandev, this gets us a name and registers the
* linux netdevice.
*/
SET_MODULE_OWNER(wlandev->netdev);
if ( register_wlandev(wlandev) != 0 ) {
WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
result = -EIO;
goto fail;
}
#if 0
/* TODO: Move this and an irq test into an hfa384x_testif() routine.
*/
outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
if ( reg != PRISM2STA_MAGIC ) {
WLAN_LOG_ERROR("MAC register access test failed!\n");
result = -EIO;
goto fail;
}
#endif
/* Initialize the hw data */
hfa384x_create(hw, wlandev->netdev->irq, 0, mem);
hw->wlandev = wlandev;
/* Do a chip-level reset on the MAC */
if (prism2_doreset) {
result = hfa384x_corereset(hw,
prism2_reset_holdtime,
prism2_reset_settletime, 0);
if (result != 0) {
WLAN_LOG_ERROR(
"%s: hfa384x_corereset() failed.\n",
dev_info);
unregister_wlandev(wlandev);
hfa384x_destroy(hw);
result = -EIO;
goto fail;
}
}
pci_set_drvdata(pdev, wlandev);
/* Shouldn't actually hook up the IRQ until we
* _know_ things are alright. A test routine would help.
*/
request_irq(wlandev->netdev->irq, hfa384x_interrupt,
SA_SHIRQ, wlandev->name, wlandev);
wlandev->msdstate = WLAN_MSD_HWPRESENT;
result = 0;
goto done;
fail:
pci_set_drvdata(pdev, NULL);
if (wlandev) kfree(wlandev);
if (hw) kfree(hw);
if (mem) iounmap((void *) mem);
pci_release_regions(pdev);
pci_disable_device(pdev);
done:
DBFEXIT;
return result;
}
