Exemplo n.º 1
0
int ieee802_11_set_beacon(struct hostapd_data *hapd)
{
	struct wpa_driver_ap_params params;
	struct hostapd_freq_params freq;
	struct hostapd_iface *iface = hapd->iface;
	struct hostapd_config *iconf = iface->conf;
	struct wpabuf *beacon, *proberesp, *assocresp;
	int res, ret = -1;

	if (hapd->csa_in_progress) {
		wpa_printf(MSG_ERROR, "Cannot set beacons during CSA period");
		return -1;
	}

	hapd->beacon_set_done = 1;

	if (ieee802_11_build_ap_params(hapd, &params) < 0)
		return -1;

	if (hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp) <
	    0)
		goto fail;

	params.beacon_ies = beacon;
	params.proberesp_ies = proberesp;
	params.assocresp_ies = assocresp;

	if (iface->current_mode &&
	    hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,
				    iconf->channel, iconf->ieee80211n,
				    iconf->ieee80211ac,
				    iconf->secondary_channel,
				    iconf->vht_oper_chwidth,
				    iconf->vht_oper_centr_freq_seg0_idx,
				    iconf->vht_oper_centr_freq_seg1_idx,
				    iface->current_mode->vht_capab) == 0)
		params.freq = &freq;

	res = hostapd_drv_set_ap(hapd, &params);
	//  MANA - Start Beacon Stuffs here
	//hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);
	//struct wpa_driver_ap_params params2 = params;
	//os_memset(&params2.ssid, 0, params2.ssid_len);
	//params2.hide_ssid = HIDDEN_SSID_ZERO_CONTENTS;
	//hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp);
	//params2.beacon_ies = beacon;
	//params2.proberesp_ies = proberesp;
   //params2.assocresp_ies = assocresp;
	//wpa_printf(MSG_INFO, "ZZZZ : Sending Hidden AP: %s", params2.ssid);
	//res = hostapd_drv_set_ap(hapd, &params2);
	//hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);
	//  MANA - End Beacon Stuffs here
	if (res)
		wpa_printf(MSG_ERROR, "Failed to set beacon parameters");
	else
		ret = 0;
fail:
	ieee802_11_free_ap_params(&params);
	return ret;
}
Exemplo n.º 2
0
int ieee802_11_set_beacon(struct hostapd_data *hapd)
{
	struct wpa_driver_ap_params params;
	struct hostapd_freq_params freq;
	struct hostapd_iface *iface = hapd->iface;
	struct hostapd_config *iconf = iface->conf;
	struct wpabuf *beacon, *proberesp, *assocresp;
	int res, ret = -1;

	if (hapd->csa_in_progress) {
		wpa_printf(MSG_ERROR, "Cannot set beacons during CSA period");
		return -1;
	}

	hapd->beacon_set_done = 1;

	if (ieee802_11_build_ap_params(hapd, &params) < 0)
		return -1;

	if (hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp) <
	    0)
		goto fail;

	params.beacon_ies = beacon;
	params.proberesp_ies = proberesp;
	params.assocresp_ies = assocresp;
	params.reenable = hapd->reenable_beacon;
	hapd->reenable_beacon = 0;

	if (iface->current_mode &&
	    hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,
				    iconf->channel, iconf->ieee80211n,
				    iconf->ieee80211ac,
				    iconf->secondary_channel,
				    iconf->vht_oper_chwidth,
				    iconf->vht_oper_centr_freq_seg0_idx,
				    iconf->vht_oper_centr_freq_seg1_idx,
				    iface->current_mode->vht_capab,
				    iconf->bwmode) == 0)
		params.freq = &freq;

	res = hostapd_drv_set_ap(hapd, &params);
	hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);
	if (res)
		wpa_printf(MSG_ERROR, "Failed to set beacon parameters");
	else
		ret = 0;
fail:
	ieee802_11_free_ap_params(&params);
	return ret;
}
Exemplo n.º 3
0
int hostapd_set_ap_wps_ie(struct hostapd_data *hapd)
{
	struct wpabuf *beacon, *proberesp, *assocresp;
	int ret;

	if (hapd->driver == NULL || hapd->driver->set_ap_wps_ie == NULL)
		return 0;

	if (hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp) <
	    0)
		return -1;

	ret = hapd->driver->set_ap_wps_ie(hapd->drv_priv, beacon, proberesp,
					  assocresp);

	hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);

	return ret;
}
Exemplo n.º 4
0
void ieee802_11_set_beacon(struct hostapd_data *hapd)
{
	struct ieee80211_mgmt *head = NULL;
	u8 *tail = NULL;
	size_t head_len = 0, tail_len = 0;
	struct wpa_driver_ap_params params;
	struct wpabuf *beacon, *proberesp, *assocresp;
#ifdef NEED_AP_MLME
	u16 capab_info;
	u8 *pos, *tailpos;
#endif /* NEED_AP_MLME */

	hapd->beacon_set_done = 1;

#ifdef NEED_AP_MLME

#define BEACON_HEAD_BUF_SIZE 256
#define BEACON_TAIL_BUF_SIZE 512
	head = os_zalloc(BEACON_HEAD_BUF_SIZE);
	tail_len = BEACON_TAIL_BUF_SIZE;
#ifdef CONFIG_WPS
	if (hapd->conf->wps_state && hapd->wps_beacon_ie)
		tail_len += wpabuf_len(hapd->wps_beacon_ie);
#endif /* CONFIG_WPS */
#ifdef CONFIG_P2P
	if (hapd->p2p_beacon_ie)
		tail_len += wpabuf_len(hapd->p2p_beacon_ie);
#endif /* CONFIG_P2P */
	tailpos = tail = os_malloc(tail_len);
	if (head == NULL || tail == NULL) {
		wpa_printf(MSG_ERROR, "Failed to set beacon data");
		os_free(head);
		os_free(tail);
		return;
	}

	head->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
					   WLAN_FC_STYPE_BEACON);
	head->duration = host_to_le16(0);
	os_memset(head->da, 0xff, ETH_ALEN);

	os_memcpy(head->sa, hapd->own_addr, ETH_ALEN);
	os_memcpy(head->bssid, hapd->own_addr, ETH_ALEN);
	head->u.beacon.beacon_int =
		host_to_le16(hapd->iconf->beacon_int);

	/* hardware or low-level driver will setup seq_ctrl and timestamp */
	capab_info = hostapd_own_capab_info(hapd, NULL, 0);
	head->u.beacon.capab_info = host_to_le16(capab_info);
	pos = &head->u.beacon.variable[0];

	/* SSID */
	*pos++ = WLAN_EID_SSID;
	if (hapd->conf->ignore_broadcast_ssid == 2) {
		/* clear the data, but keep the correct length of the SSID */
		*pos++ = hapd->conf->ssid.ssid_len;
		os_memset(pos, 0, hapd->conf->ssid.ssid_len);
		pos += hapd->conf->ssid.ssid_len;
	} else if (hapd->conf->ignore_broadcast_ssid) {
		*pos++ = 0; /* empty SSID */
	} else {
		*pos++ = hapd->conf->ssid.ssid_len;
		os_memcpy(pos, hapd->conf->ssid.ssid,
			  hapd->conf->ssid.ssid_len);
		pos += hapd->conf->ssid.ssid_len;
	}

	/* Supported rates */
	pos = hostapd_eid_supp_rates(hapd, pos);

	/* DS Params */
	pos = hostapd_eid_ds_params(hapd, pos);

	head_len = pos - (u8 *) head;

	tailpos = hostapd_eid_country(hapd, tailpos,
				      tail + BEACON_TAIL_BUF_SIZE - tailpos);

	/* ERP Information element */
	tailpos = hostapd_eid_erp_info(hapd, tailpos);

	/* Extended supported rates */
	tailpos = hostapd_eid_ext_supp_rates(hapd, tailpos);

	/* RSN, MDIE, WPA */
	tailpos = hostapd_eid_wpa(hapd, tailpos, tail + BEACON_TAIL_BUF_SIZE -
				  tailpos);

#ifdef CONFIG_IEEE80211N
	tailpos = hostapd_eid_ht_capabilities(hapd, tailpos);
	tailpos = hostapd_eid_ht_operation(hapd, tailpos);
#endif /* CONFIG_IEEE80211N */

	tailpos = hostapd_eid_ext_capab(hapd, tailpos);

	/*
	 * TODO: Time Advertisement element should only be included in some
	 * DTIM Beacon frames.
	 */
	tailpos = hostapd_eid_time_adv(hapd, tailpos);

	tailpos = hostapd_eid_interworking(hapd, tailpos);
	tailpos = hostapd_eid_adv_proto(hapd, tailpos);
	tailpos = hostapd_eid_roaming_consortium(hapd, tailpos);

	/* Wi-Fi Alliance WMM */
	tailpos = hostapd_eid_wmm(hapd, tailpos);

#ifdef CONFIG_WPS
	if (hapd->conf->wps_state && hapd->wps_beacon_ie) {
		os_memcpy(tailpos, wpabuf_head(hapd->wps_beacon_ie),
			  wpabuf_len(hapd->wps_beacon_ie));
		tailpos += wpabuf_len(hapd->wps_beacon_ie);
	}
#endif /* CONFIG_WPS */

#ifdef CONFIG_P2P
	if ((hapd->conf->p2p & P2P_ENABLED) && hapd->p2p_beacon_ie) {
		os_memcpy(tailpos, wpabuf_head(hapd->p2p_beacon_ie),
			  wpabuf_len(hapd->p2p_beacon_ie));
		tailpos += wpabuf_len(hapd->p2p_beacon_ie);
	}
#endif /* CONFIG_P2P */
#ifdef CONFIG_P2P_MANAGER
	if ((hapd->conf->p2p & (P2P_MANAGE | P2P_ENABLED | P2P_GROUP_OWNER)) ==
	    P2P_MANAGE)
		tailpos = hostapd_eid_p2p_manage(hapd, tailpos);
#endif /* CONFIG_P2P_MANAGER */

	tail_len = tailpos > tail ? tailpos - tail : 0;

#endif /* NEED_AP_MLME */

	os_memset(&params, 0, sizeof(params));
	params.head = (u8 *) head;
	params.head_len = head_len;
	params.tail = tail;
	params.tail_len = tail_len;
	params.dtim_period = hapd->conf->dtim_period;
	params.beacon_int = hapd->iconf->beacon_int;
	params.ssid = (u8 *) hapd->conf->ssid.ssid;
	params.ssid_len = hapd->conf->ssid.ssid_len;
	params.pairwise_ciphers = hapd->conf->rsn_pairwise ?
		hapd->conf->rsn_pairwise : hapd->conf->wpa_pairwise;
	params.group_cipher = hapd->conf->wpa_group;
	params.key_mgmt_suites = hapd->conf->wpa_key_mgmt;
	params.auth_algs = hapd->conf->auth_algs;
	params.wpa_version = hapd->conf->wpa;
	params.privacy = hapd->conf->ssid.wep.keys_set || hapd->conf->wpa ||
		(hapd->conf->ieee802_1x &&
		 (hapd->conf->default_wep_key_len ||
		  hapd->conf->individual_wep_key_len));
	switch (hapd->conf->ignore_broadcast_ssid) {
	case 0:
		params.hide_ssid = NO_SSID_HIDING;
		break;
	case 1:
		params.hide_ssid = HIDDEN_SSID_ZERO_LEN;
		break;
	case 2:
		params.hide_ssid = HIDDEN_SSID_ZERO_CONTENTS;
		break;
	}
	hostapd_build_ap_extra_ies(hapd, &beacon, &proberesp, &assocresp);
	params.beacon_ies = beacon;
	params.proberesp_ies = proberesp;
	params.assocresp_ies = assocresp;
	params.isolate = hapd->conf->isolate;
#ifdef NEED_AP_MLME
	params.cts_protect = !!(ieee802_11_erp_info(hapd) &
				ERP_INFO_USE_PROTECTION);
	params.preamble = hapd->iface->num_sta_no_short_preamble == 0 &&
		hapd->iconf->preamble == SHORT_PREAMBLE;
	if (hapd->iface->current_mode &&
	    hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G)
		params.short_slot_time =
			hapd->iface->num_sta_no_short_slot_time > 0 ? 0 : 1;
	else
		params.short_slot_time = -1;
	if (!hapd->iconf->ieee80211n || hapd->conf->disable_11n)
		params.ht_opmode = -1;
	else
		params.ht_opmode = hapd->iface->ht_op_mode;
#endif /* NEED_AP_MLME */
	params.interworking = hapd->conf->interworking;
	if (hapd->conf->interworking &&
	    !is_zero_ether_addr(hapd->conf->hessid))
		params.hessid = hapd->conf->hessid;
	params.access_network_type = hapd->conf->access_network_type;
	if (hostapd_drv_set_ap(hapd, &params))
		wpa_printf(MSG_ERROR, "Failed to set beacon parameters");
	hostapd_free_ap_extra_ies(hapd, beacon, proberesp, assocresp);

	os_free(tail);
	os_free(head);
}