LRESULT FavoriteHubsFrame::onSpeaker(UINT /*uMsg*/, WPARAM wParam, LPARAM lParam, BOOL& /*bHandled*/) {
if(wParam == HUB_CONNECTED) {
auto_ptr<string> hub(reinterpret_cast<string*>(lParam));
onlineHubs.push_back(*hub);
for(int i = 0; i < ctrlHubs.GetItemCount(); ++i) {
FavoriteHubEntry* e = (FavoriteHubEntry*)ctrlHubs.GetItemData(i);
if(e->getServer() == *hub) {
ctrlHubs.SetItem(i,0,LVIF_IMAGE, NULL, 0, 0, 0, NULL);
ctrlHubs.Update(i);
return 0;
}
}
} else if(wParam == HUB_DISCONNECTED) {
auto_ptr<string> hub(reinterpret_cast<string*>(lParam));
onlineHubs.erase(remove(onlineHubs.begin(), onlineHubs.end(), *hub), onlineHubs.end());
for(int i = 0; i < ctrlHubs.GetItemCount(); ++i) {
FavoriteHubEntry* e = (FavoriteHubEntry*)ctrlHubs.GetItemData(i);
if(e->getServer() == *hub) {
ctrlHubs.SetItem(i,0,LVIF_IMAGE, NULL, 1, 0, 0, NULL);
ctrlHubs.Update(i);
return 0;
}
}
}
return 0;
}
void Coroutine::notify() {
// Unblock the coroutine when an event occurs.
switch (status_) {
case Coroutine::WAITING: status_ = Coroutine::RUNNABLE; break;
case Coroutine::RUNNABLE: return;
case Coroutine::RUNNING: // fallthrough
case Coroutine::EXITED: // fallthrough
case Coroutine::DELETED: // fallthrough
case Coroutine::NEW: // fallthrough
default: assert(!"illegal state"); break;
}
hub()->waiting_--;
hub()->runnable_.push_back(shared_from_this());
}
int main(int argc, char ** argv)
{
char * service = NULL;
char * env;
env = getenv(ENV_SERVICE);
if ((env != NULL) && (strlen(env) != 0)) {
service = malloc(strlen(env) + 1);
if (service == NULL) {
perror("malloc");
return 1;
}
strcpy(service, env);
}
if (service == NULL) {
if (argc != 2) {
help(argv[0]);
return 1;
}
service = argv[1];
} else {
if (argc != 1) {
help(argv[0]);
return 1;
}
}
printf("tcphub running on port %s\n", service);
fflush(stdout);
if (hub(service) < 0) {
return 1;
}
}
int main(int argc, char** argv)
{
try {
myo::Hub hub("com.example.hello-myo"); // not planning to change this yet
std::cout << "Attempting to find a Myo..." << std::endl;
myo::Myo* myo = hub.waitForMyo(10000);
if (!myo) {
throw std::runtime_error("Unable to find a Myo!");
}
std::cout << "Connected to a Myo armsband!" << std::endl << std::endl;
MyoAVGCoreController collector;
// init the AVGController
hub.addListener(&collector);
while (1) {
hub.run(1000 / 10);
collector.print();
collector.eco_cycle();
}
}
catch (const std::exception& e) {
std::cerr << "Error: " << e.what() << std::endl;
std::cerr << "Press enter to continue.";
std::cin.ignore();
return 1;
}
}
int main() {
try {
// An actual myo::Hub; NOT a MyoSim::Hub.
myo::Hub hub("com.voidingwarranties.myo-simulator-example");
myo::Myo* myo = hub.waitForMyo(10000);
if (!myo) {
throw std::runtime_error("Unable to find a Myo!");
}
// Record only pose events.
MyoSim::EventRecorder recorder(MyoSim::EventRecorder::POSE);
hub.addListener(&recorder);
// Record for 5 seconds.
myo->unlock(myo::Myo::unlockHold);
hub.run(5000);
myo->lock();
std::cout << "Events recorded. Press ENTER to replay events.";
getchar();
MyoSim::Hub simulated_hub;
PrintListener print_listener;
simulated_hub.addListener(&print_listener);
MyoSim::EventPlayer player(simulated_hub);
player.play(recorder.getEventSession());
} catch (const std::exception& ex) {
std::cerr << "Error: " << ex.what() << std::endl;
return 1;
}
return 0;
}
void fdf(t_p *f)
{
int i;
int c;
c = 0;
i = 0;
f->mlx = mlx_init();
f->win = mlx_new_window(f->mlx, f->h, f->l, "fdf");
drawx(f, 0X00FF00);
drawy(f, 0X00FF00);
hub(f);
mlx_key_hook(f->win, key_funct, 0);
mlx_loop(f->mlx);
}
void Coroutine::block() {
// Block the current coroutine until some I/O event occurs. The coroutine will
// not be rescheduled until explicitly scheduled.
// Anchor the coroutine, so that it doesn't get GC'ed while blocked on I/O.
Ptr<Coroutine> anchor = shared_from_this();
assert(coroCurrent == this);
switch (status_) {
case Coroutine::RUNNING: status_ = Coroutine::BLOCKED; break;
case Coroutine::EXITED: break;
case Coroutine::DELETED: break; // fallthrough
case Coroutine::RUNNABLE: // fallthrough
case Coroutine::BLOCKED: // fallthrough
case Coroutine::NEW: // fallthrough
default: assert(!"illegal state"); break;
}
hub()->blocked_++;
main()->swap();
}
int main(int argc, char** argv)
{
try {
myo::Hub hub("com.example.multiple-myos");
// Instantiate the PrintMyoEvents class we defined above, and attach it as a listener to our Hub.
PrintMyoEvents printer;
hub.addListener(&printer);
while (1) {
// Process events for 10 milliseconds at a time.
hub.run(10);
}
} catch (const std::exception& e) {
std::cerr << "Error: " << e.what() << std::endl;
std::cerr << "Press enter to continue.";
std::cin.ignore();
return 1;
}
}
void Coroutine::wait() {
// Block the current coroutine until some event occurs. The coroutine will not
// be rescheduled until explicitly scheduled.
// Anchor the coroutine, so that it doesn't get GC'ed while waiting.
// FixMe: Should this be the case? Maybe a waiting coroutine should be
// collected.
Ptr<Coroutine> anchor = shared_from_this();
assert(coroCurrent == this);
switch (status_) {
case Coroutine::RUNNING: status_ = Coroutine::WAITING; break;
case Coroutine::EXITED: break;
case Coroutine::DELETED: break; // fallthrough
case Coroutine::RUNNABLE: // fallthrough
case Coroutine::BLOCKED: // fallthrough
case Coroutine::NEW: // fallthrough
default: assert(!"illegal state"); break;
}
hub()->waiting_++;
main()->swap();
}
void MyoDevice::runDeviceLoop()
{
WearableDevice::setDeviceStatus(deviceStatus::RUNNING);
GestureFilter gestureFilter(state, 0, mainGui);
posePipeline.registerFilter(&gestureFilter);
posePipeline.registerFilter(WearableDevice::sharedData);
AveragingFilter averagingFilter(5);
MyoTranslationFilter translationFilter(state);
orientationPipeline.registerFilter(&averagingFilter);
orientationPipeline.registerFilter(&translationFilter);
orientationPipeline.registerFilter(WearableDevice::sharedData);
mainGui->connectSignallerToProfileWidgets(&profileSignaller);
AveragingFilter rssiAveragingFilter(5);
rssiPipeline.registerFilter(&rssiAveragingFilter);
rssiPipeline.registerFilter(WearableDevice::sharedData);
connectPipeline.registerFilter(WearableDevice::sharedData);
std::chrono::milliseconds rssi_start =
std::chrono::duration_cast<std::chrono::milliseconds>(
std::chrono::steady_clock::now().time_since_epoch()); /* Used to control when to request rssi */
std::chrono::milliseconds rssi_finish;
try
{
Hub hub(appIdentifier);
hub.setLockingPolicy(hub.lockingPolicyNone);
Myo* myo = hub.waitForMyo(myoFindTimeout);
if (!myo)
{
std::cout << "Could not find a Myo." << std::endl;
WearableDevice::setDeviceStatus(deviceStatus::ERR);
return;
}
MyoCallbacks myoCallbacks(*this);
hub.addListener(&myoCallbacks);
while (true)
{
if (WearableDevice::stopDeviceRequested())
{
break;
}
filterDataMap extraData = gestureFilter.getExtraDataForSCD();
if (extraData.size() > 0)
{
WearableDevice::sharedData->setInput(extraData);
WearableDevice::sharedData->process();
}
if (profileSignaller.getProfileName() != prevProfileName)
{
prevProfileName = profileSignaller.getProfileName();
updateProfiles();
}
rssi_finish = std::chrono::duration_cast<std::chrono::milliseconds>(
std::chrono::steady_clock::now().time_since_epoch());
if ((rssi_finish - rssi_start).count() > MIN_RSSI_DELAY)
{
myo->requestRssi();
rssi_start = std::chrono::duration_cast<std::chrono::milliseconds>(
std::chrono::steady_clock::now().time_since_epoch());
}
hub.run(durationInMilliseconds);
}
}
catch (const std::exception& e)
{
std::cout << "Exception: " << e.what() << std::endl;
WearableDevice::setDeviceStatus(deviceStatus::ERR);
return;
}
WearableDevice::setDeviceStatus(deviceStatus::DONE);
}
int main(int argc, char *argv[])
{
// Initalizing these to NULL prevents segfaults!
AVFormatContext *pFormatCtx = NULL;
int i, videoStream;
AVCodecContext *pCodecCtxOrig = NULL;
AVCodecContext *pCodecCtx = NULL; // 코덱 컨트롤러(?) 이걸 자주 쓴다.
AVCodec *pCodec = NULL; // 영상을 디코딩할 코덱
AVFrame *pFrame = NULL; // 영상데이터 라고 보면됨.
AVPacket packet;
int frameFinished;
struct SwsContext *sws_ctx = NULL; // Convert the image into YUV format that SDL uses
//SDL 관련 변수
SDL_Overlay *bmp;
SDL_Surface *screen;
SDL_Rect rect;
SDL_Event event;
CVideoSocket videoSocket;
//줌인 줌 아웃을 위한 변수
int rect_w = 0;
int rect_h = 0;
// We catch any exceptions that might occur below -- see the catch statement for more details.
try
{
// 여기부터 마이오 초기화
// First, we create a Hub with our application identifier. Be sure not to use the com.example namespace when
// publishing your application. The Hub provides access to one or more Myos.
// 마이오에서 제공하는 어플리케이션과 연결하는 허브 생성
myo::Hub hub("com.example.hello-myo");
// 마이오 찾는중 ...
std::cout << "Attempting to find a Myo..." << std::endl;
// Next, we attempt to find a Myo to use. If a Myo is already paired in Myo Connect, this will return that Myo
// immediately.
// waitForMyo() takes a timeout value in milliseconds. In this case we will try to find a Myo for 10 seconds, and
// if that fails, the function will return a null pointer.
// 마이오를 찾는 동안 대기하는 소스코드
myo::Myo* myo = hub.waitForMyo(10000);
// If waitForMyo() returned a null pointer, we failed to find a Myo, so exit with an error message.
// 마이오가 존재하지 않을경우 예외처리
if (!myo)
{
throw std::runtime_error("Unable to find a Myo!");
}
// We've found a Myo.
std::cout << "Connected to a Myo armband!" << std::endl << std::endl;
// Next we construct an instance of our DeviceListener, so that we can register it with the Hub.
// 마이오에서 얻은 데이터를 가공해주는 클래스
DataCollector collector;
// Hub::addListener() takes the address of any object whose class inherits from DeviceListener, and will cause
// Hub::run() to send events to all registered device listeners.
// 데이터를 지속적으로 받아온다.
hub.addListener(&collector);
//---여기까지 마이오 초기화
// SDL 초기화
InitSDL();
// Open video file
// 파일 또는 데이터 스트림을 연다.
if (avformat_open_input(&pFormatCtx, videoSocket.videoStreamUrl, NULL, NULL) != 0)
{
return -1; // Couldn't open file
}
// Retrieve stream information
// 데이터 스트림의 정보를 얻어온다.
if (avformat_find_stream_info(pFormatCtx, NULL) < 0)
{
return -1; // Couldn't find stream information
}
// Dump information about file onto standard error
av_dump_format(pFormatCtx, 0, videoSocket.videoStreamUrl, 0);
// Find the first video stream
// 비디로 스트림을 찾는과정 - 어떤 형식의 데이터 스트림인지 판별 ( 우리는 h.264로 고정되어있지만...)
videoStream = -1;
for (i = 0; (unsigned)i < pFormatCtx->nb_streams; i++)
{
if (pFormatCtx->streams[i]->codec->codec_type == AVMEDIA_TYPE_VIDEO)
{
videoStream = i;
break;
}
}
if (videoStream == -1)
{
return -1; // Didn't find a video stream
}
// Get a pointer to the codec context for the video stream
pCodecCtxOrig = pFormatCtx->streams[videoStream]->codec;
// Find the decoder for the video stream
pCodec = avcodec_find_decoder(pCodecCtxOrig->codec_id);
if (pCodec == NULL)
{
fprintf(stderr, "Unsupported codec!\n");
return -1; // Codec not found
}
// Copy context
// 왜 인지 모르겠지만 그냥 쓰지 않고 복사해서 사용한다.
pCodecCtx = avcodec_alloc_context3(pCodec);
if (avcodec_copy_context(pCodecCtx, pCodecCtxOrig) != 0)
{
fprintf(stderr, "Couldn't copy codec context");
return -1; // Error copying codec context
}
// Open codec
if (avcodec_open2(pCodecCtx, pCodec, NULL)<0)
{
return -1; // Could not open codec
}
// Allocate video frame
pFrame = av_frame_alloc();
// Make a screen to put our video
// 스크린을 생성
#ifndef __DARWIN__
screen = SDL_SetVideoMode(pCodecCtx->width, pCodecCtx->height, 0, 0);
#else
screen = SDL_SetVideoMode(pCodecCtx->width, pCodecCtx->height, 24, 0);
#endif
if (!screen)
{
fprintf(stderr, "SDL: could not set video mode - exiting\n");
exit(1);
}
// Allocate a place to put our YUV image on that screen
// 이미지를 스크린에 그림
bmp = SDL_CreateYUVOverlay(pCodecCtx->width,
pCodecCtx->height,
SDL_YV12_OVERLAY,
screen);
// initialize SWS context for software scaling
sws_ctx = sws_getContext(pCodecCtx->width,
pCodecCtx->height,
pCodecCtx->pix_fmt,
pCodecCtx->width,
pCodecCtx->height,
AV_PIX_FMT_YUV420P,
SWS_BILINEAR,
NULL,
NULL,
NULL
);
while (av_read_frame(pFormatCtx, &packet) >= 0)
{
// 메인 루프
// In each iteration of our main loop, we run the Myo event loop for a set number of milliseconds.
// 데이터를 어느정도 주기로 받아올지 정하는 소스
// 이 값이 낮아지면 영상을 받아오는데도 딜레이가 걸리기때문에 원하는 fps를 고려해야한다.
hub.run(1000 / 500);
// After processing events, we call the print() member function we defined above to print out the values we've
// obtained from any events that have occurred.
// 마이오 상태 모니터링 코드
collector.print();
// 마이오 루프 여기까지
// Is this a packet from the video stream?
if (packet.stream_index == videoStream)
{
// Decode video frame
avcodec_decode_video2(pCodecCtx, pFrame, &frameFinished, &packet);
// Did we get a video frame?
// 비디오 프레임을 비트맵 이미지로 변환
if (frameFinished)
{
SDL_LockYUVOverlay(bmp);
AVPicture pict;
pict.data[0] = bmp->pixels[0];
pict.data[1] = bmp->pixels[2];
pict.data[2] = bmp->pixels[1];
pict.linesize[0] = bmp->pitches[0];
pict.linesize[1] = bmp->pitches[2];
pict.linesize[2] = bmp->pitches[1];
// Convert the image into YUV format that SDL uses
sws_scale(sws_ctx, (uint8_t const * const *)pFrame->data,
pFrame->linesize, 0, pCodecCtx->height,
pict.data, pict.linesize);
SDL_UnlockYUVOverlay(bmp);
// 소프트웨어상으로 줌인 줌아웃을 하기위해 영상프레임의 사이즈를 조절
rect.x = -rect_w/2;
rect.y = -rect_h/2;
rect.w = pCodecCtx->width + rect_w;
rect.h = pCodecCtx->height + rect_h;
SDL_DisplayYUVOverlay(bmp, &rect);
}
}
// Free the packet that was allocated by av_read_frame
av_free_packet(&packet);
SDL_PollEvent(&event);
//// 마이오의 동작을 체크해서 메시지 송신
//// 좌우 카메라 컨트롤
if (collector.currentPose == myo::Pose::waveOut)
{
SendData(videoSocket.ClientSocket, "right", videoSocket.ToServer);
rest = true;
}
if (collector.currentPose == myo::Pose::waveIn)
{
SendData(videoSocket.ClientSocket, "left", videoSocket.ToServer);
rest = true;
}
// 상하 카메라 컨트롤
if (collector.currentPose == myo::Pose::fingersSpread && collector.pitch_w > 10)
{
SendData(videoSocket.ClientSocket, "up", videoSocket.ToServer);
rest = true;
}
if (collector.currentPose == myo::Pose::fingersSpread && collector.pitch_w < 6)
{
SendData(videoSocket.ClientSocket, "down", videoSocket.ToServer);
rest = true;
}
if (collector.currentPose == myo::Pose::rest &&rest == true)
{
SendData(videoSocket.ClientSocket, "stop", videoSocket.ToServer);
rest = false;
}
if (collector.currentPose == myo::Pose::doubleTap && collector.roll_w <= 5)
{
collector.currentPose = myo::Pose::rest;
rest = true;
myo->lock();
}
if (collector.currentPose == myo::Pose::doubleTap && collector.roll_w > 5)
{
rest = true;
myo->unlock(myo::Myo::unlockHold);
}
// 마이오의 동작을 체크해서 줌인 줌 아웃
if (collector.currentPose == myo::Pose::fist && collector.roll_w < 6)
{
ZoomOut(rect_w, rect_h, 0);
}
if (collector.currentPose == myo::Pose::fist && collector.roll_w > 8)
{
ZoomIn(rect_w, rect_h, 300);
}
// 키 이벤트를 받는 함수
switch (event.type)
{
case SDL_QUIT:
SDL_Quit();
exit(0);
break;
case SDL_KEYDOWN:
/* Check the SDLKey values and move change the coords */
switch (event.key.keysym.sym){
case SDLK_LEFT:
// 문자열 송신
SendData(videoSocket.ClientSocket, "left", videoSocket.ToServer);
break;
case SDLK_RIGHT:
// 문자열 송신
SendData(videoSocket.ClientSocket, "right", videoSocket.ToServer);
break;
case SDLK_UP:
SendData(videoSocket.ClientSocket, "up", videoSocket.ToServer);
break;
case SDLK_DOWN:
SendData(videoSocket.ClientSocket, "down", videoSocket.ToServer);
break;
case SDLK_q: // 줌 인
ZoomIn(rect_w,rect_h,300);
break;
case SDLK_w: // 줌 아웃
ZoomOut(rect_w, rect_h, 0);
break;
case SDLK_s: // 모터 stop
SendData(videoSocket.ClientSocket, "stop", videoSocket.ToServer);
break;
case SDLK_x: // 플그램 종료
SDL_Quit();
exit(0);
break;
default:
break;
}
default:
break;
}
}
// Free the YUV frame
av_frame_free(&pFrame);
// Close the codecs
avcodec_close(pCodecCtx);
avcodec_close(pCodecCtxOrig);
// Close the video file
avformat_close_input(&pFormatCtx);
// 소켓 닫기
closesocket(videoSocket.ClientSocket);
WSACleanup();
return 0;
}
// 개인적으로 exception handling을 이렇게하는걸 좋아하지 않지만...
// 예제에서 이렇게 사용하였기에 일단 이렇게 두었다.
catch (const std::exception& e)
{
std::cerr << "Error: " << e.what() << std::endl;
std::cerr << "Press enter to continue.";
std::cin.ignore();
return 1;
}
}
///@brief Execute a device.
int MyoDevice::run()
{
try
{
// Read the initialize file.
this->readIniFile();
// Prepare to use SIGService.
this->sigService.setName(this->serviceName);
this->initializeSigService(sigService);
// check receive SIGService data by another thread
CheckRecvSIGServiceData checkRecvSIGServiceData;
boost::thread thCheckRecvData(&CheckRecvSIGServiceData::run, &checkRecvSIGServiceData, &this->sigService);
// First, we create a Hub with our application identifier. Be sure not to use the com.example namespace when
// publishing your application. The Hub provides access to one or more Myos.
myo::Hub hub("org.sigverse.myoplugin");
std::cout << "Attempting to find a Myo..." << std::endl;
// Next, we attempt to find a Myo to use. If a Myo is already paired in Myo Connect, this will return that Myo
// immediately.
// waitForMyo() takes a timeout value in milliseconds. In this case we will try to find a Myo for 10 seconds, and
// if that fails, the function will return a null pointer.
myo::Myo* myo = hub.waitForMyo(10000);
// If waitForMyo() returned a null pointer, we failed to find a Myo, so exit with an error message.
if (!myo)
{
throw std::runtime_error("Unable to find a Myo!");
}
// We've found a Myo.
std::cout << "Connected to a Myo armband!" << std::endl << std::endl;
// Next we enable EMG streaming on the found Myo.
myo->setStreamEmg(myo::Myo::streamEmgEnabled);
// Next we construct an instance of our DeviceListener, so that we can register it with the Hub.
DataCollector collector;
// Hub::addListener() takes the address of any object whose class inherits from DeviceListener, and will cause
// Hub::run() to send events to all registered device listeners.
hub.addListener(&collector);
// Finally we enter our main loop.
while (true)
{
// In each iteration of our main loop, we run the Myo event loop for a set number of milliseconds.
// In this case, we wish to update our display 20 times a second, so we run for 1000/20 milliseconds.
hub.run(1000/20);
// After processing events, we call the print() member function we defined above to print out the values we've
// obtained from any events that have occurred.
MyoSensorData sensorData = collector.getSensorData();
// Send message to SigServer.
std::string messageHeader = this->generateMessageHeader();
std::string sensorDataMessage = sensorData.encodeSensorData();
std::string message = messageHeader + sensorDataMessage;
this->sendMessage(this->sigService, message);
// std::cout << message << std::endl;
}
sigService.disconnect();
}
catch (std::exception &ex)
{
std::cout << "run ERR :" << ex.what() << std::endl;
throw ex;
}
return 0;
}
int main(int argc, char** argv)
{
try {
// ==== START MYO ====
// First, we create a Hub with our application identifier. Be sure not to use the com.example namespace when
// publishing your application. The Hub provides access to one or more Myos.
myo::Hub hub("com.example.emg-data-sample");
std::cout << "Attempting to find a Myo..." << std::endl;
// Next, we attempt to find a Myo to use. If a Myo is already paired in Myo Connect, this will return that Myo
// immediately.
// waitForMyo() takes a timeout value in milliseconds. In this case we will try to find a Myo for 10 seconds, and
// if that fails, the function will return a null pointer.
myo::Myo* myo = hub.waitForMyo(10000);
// If waitForMyo() returned a null pointer, we failed to find a Myo, so exit with an error message.
if (!myo) {
throw std::runtime_error("Unable to find a Myo!");
}
// We've found a Myo.
std::cout << "Connected to a Myo armband!" << std::endl << std::endl;
// Next we enable EMG streaming on the found Myo.
myo->setStreamEmg(myo::Myo::streamEmgEnabled);
// =======
// Get the gesture name
std::string gesture;
// std::cin >> gesture;
// DataCollector is myo::DeviceListener class with utilities for
DataCollector collector(gesture);
// Our own gesture classifier (random forest)
randomforest classifier;
classifier.createFromFile("randomforest_AD.txt");
// Hub::addListener() takes the address of any object whose class inherits from DeviceListener, and will cause
// Hub::run() to send events to all registered device listeners.
hub.addListener(&collector);
histogram hist_filter;
std::string detected_gesture;
emgdatasampleVisualStudio2013::histGUI^ histogram_gui = gcnew emgdatasampleVisualStudio2013::histGUI();
histogram_gui->Show();
int n = 0;
while (1) {
histogram_gui->Refresh();
// In each iteration of our main loop, we run the Myo event loop for a set number of milliseconds.
// In this case, we wish to update our display 20 times a second, so we run for 1000/20 milliseconds.
hub.run(50);
std::map<std::string, float> current_data = collector.getDataset();
detected_gesture = classifier.classify(current_data);
std::cout << detected_gesture << std::endl;
// Histogram
hist_filter.add_instant(detected_gesture);
histogram_gui->updateHist(hist_filter);
if (n == 10) {
std::cout << "Filtered gesture: " << std::endl;
std::cout << hist_filter.peak() << std::endl << std::endl;
hist_filter.restart();
n = 0;
}
else {
n++;
}
}
} catch (const std::exception& e) {
std::cerr << "Error: " << e.what() << std::endl;
std::cerr << "Press enter to continue.";
std::cin.ignore();
return 1;
}
}
void sleep(Time const& time) {
hub()->timeoutIs(Timeout(time, current()));
current()->wait();
}
