Exemplo n.º 1
0
/* broadcast cmd for all I2C clients and for the gpio subsystem */
void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg)
{
	if (cx->i2c_adap[0].algo == NULL || cx->i2c_adap[1].algo == NULL) {
		CX18_ERR("adapter is not set\n");
		return;
	}
	cx18_av_cmd(cx, cmd, arg);
	i2c_clients_command(&cx->i2c_adap[0], cmd, arg);
	i2c_clients_command(&cx->i2c_adap[1], cmd, arg);
}
Exemplo n.º 2
0
/*
 * Finalize the GO7007 hardware setup, register the on-board I2C adapter
 * (if used on this board), load the I2C client driver for the sensor
 * (SAA7115 or whatever) and other devices, and register the ALSA and V4L2
 * interfaces.
 *
 * Must NOT be called with the hw_lock held.
 */
int go7007_register_encoder(struct go7007 *go)
{
	int i, ret;

	printk(KERN_INFO "go7007: registering new %s\n", go->name);

	down(&go->hw_lock);
	ret = go7007_init_encoder(go);
	up(&go->hw_lock);
	if (ret < 0)
		return -1;

	if (!go->i2c_adapter_online &&
			go->board_info->flags & GO7007_BOARD_USE_ONBOARD_I2C) {
		if (go7007_i2c_init(go) < 0)
			return -1;
		go->i2c_adapter_online = 1;
	}
	if (go->i2c_adapter_online) {
		for (i = 0; i < go->board_info->num_i2c_devs; ++i)
			init_i2c_module(&go->i2c_adapter,
					go->board_info->i2c_devs[i].type,
					go->board_info->i2c_devs[i].id,
					go->board_info->i2c_devs[i].addr);
		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
			i2c_clients_command(&go->i2c_adapter,
				DECODER_SET_CHANNEL, &go->channel_number);
	}
	if (go->board_info->flags & GO7007_BOARD_HAS_AUDIO) {
		go->audio_enabled = 1;
		go7007_snd_init(go);
	}
	return go7007_v4l2_init(go);
}
Exemplo n.º 3
0
void au0828_call_i2c_clients(struct au0828_dev *dev,
			      unsigned int cmd, void *arg)
{
	if (dev->i2c_rc != 0)
		return;

	i2c_clients_command(&dev->i2c_adap, cmd, arg);
}
Exemplo n.º 4
0
void saa7164_call_i2c_clients(struct saa7164_i2c *bus, unsigned int cmd,
	void *arg)
{
	if (bus->i2c_rc != 0)
		return;

	i2c_clients_command(&bus->i2c_adap, cmd, arg);
}
Exemplo n.º 5
0
void saa7134_i2c_call_clients(struct saa7134_dev *dev,
			      unsigned int cmd, void *arg)
{
	BUG_ON(NULL == dev->i2c_adap.algo_data);
	i2c_clients_command(&dev->i2c_adap, cmd, arg);
}
Exemplo n.º 6
0
static int mxb_probe(struct saa7146_dev* dev)
{
    struct mxb* mxb = NULL;
    int result;

    result = request_module("saa7115");
    if (result < 0) {
        printk("mxb: saa7111 i2c module not available.\n");
        return -ENODEV;
    }
    result = request_module("tea6420");
    if (result < 0) {
        printk("mxb: tea6420 i2c module not available.\n");
        return -ENODEV;
    }
    result = request_module("tea6415c");
    if (result < 0) {
        printk("mxb: tea6415c i2c module not available.\n");
        return -ENODEV;
    }
    result = request_module("tda9840");
    if (result < 0) {
        printk("mxb: tda9840 i2c module not available.\n");
        return -ENODEV;
    }
    result = request_module("tuner");
    if (result < 0) {
        printk("mxb: tuner i2c module not available.\n");
        return -ENODEV;
    }

    mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
    if( NULL == mxb ) {
        DEB_D(("not enough kernel memory.\n"));
        return -ENOMEM;
    }

    mxb->i2c_adapter = (struct i2c_adapter) {
        .class = I2C_CLASS_TV_ANALOG,
    };

    snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num);

    saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
    if(i2c_add_adapter(&mxb->i2c_adapter) < 0) {
        DEB_S(("cannot register i2c-device. skipping.\n"));
        kfree(mxb);
        return -EFAULT;
    }

    /* loop through all i2c-devices on the bus and look who is there */
    device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients);

    /* check if all devices are present */
    if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
            !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
        printk("mxb: did not find all i2c devices. aborting\n");
        i2c_del_adapter(&mxb->i2c_adapter);
        kfree(mxb);
        return -ENODEV;
    }

    /* all devices are present, probe was successful */

    /* we store the pointer in our private data field */
    dev->ext_priv = mxb;

    return 0;
}

/* some init data for the saa7740, the so-called 'sound arena module'.
   there are no specs available, so we simply use some init values */
static struct {
    int	length;
    char	data[9];
} mxb_saa7740_init[] = {
    { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
    { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
    { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
    { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
    { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
    { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
    { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
    { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
    { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
    { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
    { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
    { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
    { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
    { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
    { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
    { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
    { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
    { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
    { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
    { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
    { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
    { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
    { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
    { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
    { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
    { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
    { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
    { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
    { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
    { 3, { 0x48, 0x00, 0x01 } },
    { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
    { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
    { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
    { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
    { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
    { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
    { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
    { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
    { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
    { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
    { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
    { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
    { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
    { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
    { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
    { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
    { 3, { 0x80, 0xb3, 0x0a } },
    {-1, { 0 } }
};

/* bring hardware to a sane state. this has to be done, just in case someone
   wants to capture from this device before it has been properly initialized.
   the capture engine would badly fail, because no valid signal arrives on the
   saa7146, thus leading to timeouts and stuff. */
static int mxb_init_done(struct saa7146_dev* dev)
{
    struct mxb* mxb = (struct mxb*)dev->ext_priv;
    struct i2c_msg msg;
    struct tuner_setup tun_setup;
    v4l2_std_id std = V4L2_STD_PAL_BG;
    struct v4l2_routing route;

    int i = 0, err = 0;
    struct tea6415c_multiplex vm;

    /* select video mode in saa7111a */
    mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_S_STD, &std);

    /* select tuner-output on saa7111a */
    i = 0;
    route.input = SAA7115_COMPOSITE0;
    route.output = SAA7111_FMT_CCIR | SAA7111_VBI_BYPASS;
    mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_VIDEO_ROUTING, &route);

    /* select a tuner type */
    tun_setup.mode_mask = T_ANALOG_TV;
    tun_setup.addr = ADDR_UNSET;
    tun_setup.type = TUNER_PHILIPS_PAL;
    mxb->tuner->driver->command(mxb->tuner, TUNER_SET_TYPE_ADDR, &tun_setup);
    /* tune in some frequency on tuner */
    mxb->cur_freq.tuner = 0;
    mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV;
    mxb->cur_freq.frequency = freq;
    mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY,
                                &mxb->cur_freq);

    /* set a default video standard */
    mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);

    /* mute audio on tea6420s */
    mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, &TEA6420_line[6][0]);
    mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, &TEA6420_line[6][1]);
    mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, &TEA6420_cd[6][0]);
    mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, &TEA6420_cd[6][1]);

    /* switch to tuner-channel on tea6415c*/
    vm.out = 17;
    vm.in  = 3;
    mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm);

    /* select tuner-output on multicable on tea6415c*/
    vm.in  = 3;
    vm.out = 13;
    mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm);

    /* the rest for mxb */
    mxb->cur_input = 0;
    mxb->cur_mute = 1;

    mxb->cur_mode = V4L2_TUNER_MODE_STEREO;

    /* check if the saa7740 (aka 'sound arena module') is present
       on the mxb. if so, we must initialize it. due to lack of
       informations about the saa7740, the values were reverse
       engineered. */
    msg.addr = 0x1b;
    msg.flags = 0;
    msg.len = mxb_saa7740_init[0].length;
    msg.buf = &mxb_saa7740_init[0].data[0];

    err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
    if (err == 1) {
        /* the sound arena module is a pos, that's probably the reason
           philips refuses to hand out a datasheet for the saa7740...
           it seems to screw up the i2c bus, so we disable fast irq
           based i2c transactions here and rely on the slow and safe
           polling method ... */
        extension.flags &= ~SAA7146_USE_I2C_IRQ;
        for (i = 1; ; i++) {
            if (-1 == mxb_saa7740_init[i].length)
                break;

            msg.len = mxb_saa7740_init[i].length;
            msg.buf = &mxb_saa7740_init[i].data[0];
            err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
            if (err != 1) {
                DEB_D(("failed to initialize 'sound arena module'.\n"));
                goto err;
            }
        }
        INFO(("'sound arena module' detected.\n"));
    }
err:
    /* the rest for saa7146: you should definitely set some basic values
       for the input-port handling of the saa7146. */

    /* ext->saa has been filled by the core driver */

    /* some stuff is done via variables */
    saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source,
                                    input_port_selection[mxb->cur_input].hps_sync);

    /* some stuff is done via direct write to the registers */

    /* this is ugly, but because of the fact that this is completely
       hardware dependend, it should be done directly... */
    saa7146_write(dev, DD1_STREAM_B,	0x00000000);
    saa7146_write(dev, DD1_INIT,		0x02000200);
    saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));

    return 0;
}

/* interrupt-handler. this gets called when irq_mask is != 0.
   it must clear the interrupt-bits in irq_mask it has handled */
/*
void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
{
	struct mxb* mxb = (struct mxb*)dev->ext_priv;
}
*/

static struct saa7146_ext_vv vv_data;

/* this function only gets called when the probing was successful */
static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
    struct mxb *mxb = (struct mxb *)dev->ext_priv;

    DEB_EE(("dev:%p\n", dev));

    /* checking for i2c-devices can be omitted here, because we
       already did this in "mxb_vl42_probe" */

    saa7146_vv_init(dev, &vv_data);
    if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
        ERR(("cannot register capture v4l2 device. skipping.\n"));
        return -1;
    }

    /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
    if (MXB_BOARD_CAN_DO_VBI(dev)) {
        if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
            ERR(("cannot register vbi v4l2 device. skipping.\n"));
        }
    }

    i2c_use_client(mxb->tea6420_1);
    i2c_use_client(mxb->tea6420_2);
    i2c_use_client(mxb->tea6415c);
    i2c_use_client(mxb->tda9840);
    i2c_use_client(mxb->saa7111a);
    i2c_use_client(mxb->tuner);

    printk("mxb: found Multimedia eXtension Board #%d.\n", mxb_num);

    mxb_num++;
    mxb_init_done(dev);
    return 0;
}

static int mxb_detach(struct saa7146_dev *dev)
{
    struct mxb *mxb = (struct mxb *)dev->ext_priv;

    DEB_EE(("dev:%p\n", dev));

    i2c_release_client(mxb->tea6420_1);
    i2c_release_client(mxb->tea6420_2);
    i2c_release_client(mxb->tea6415c);
    i2c_release_client(mxb->tda9840);
    i2c_release_client(mxb->saa7111a);
    i2c_release_client(mxb->tuner);

    saa7146_unregister_device(&mxb->video_dev,dev);
    if (MXB_BOARD_CAN_DO_VBI(dev))
        saa7146_unregister_device(&mxb->vbi_dev, dev);
    saa7146_vv_release(dev);

    mxb_num--;

    i2c_del_adapter(&mxb->i2c_adapter);
    kfree(mxb);

    return 0;
}

static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
{
    struct saa7146_dev *dev = fh->dev;
    struct mxb *mxb = (struct mxb *)dev->ext_priv;
    struct saa7146_vv *vv = dev->vv_data;

    switch(cmd) {
    case VIDIOC_ENUMINPUT:
    {
        struct v4l2_input *i = arg;

        DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index));
        if (i->index < 0 || i->index >= MXB_INPUTS)
            return -EINVAL;
        memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
        return 0;
    }
    /* the saa7146 provides some controls (brightness, contrast, saturation)
       which gets registered *after* this function. because of this we have
       to return with a value != 0 even if the function succeded.. */
    case VIDIOC_QUERYCTRL:
    {
        struct v4l2_queryctrl *qc = arg;
        int i;

        for (i = MAXCONTROLS - 1; i >= 0; i--) {
            if (mxb_controls[i].id == qc->id) {
                *qc = mxb_controls[i];
                DEB_D(("VIDIOC_QUERYCTRL %d.\n", qc->id));
                return 0;
            }
        }
        return -EAGAIN;
    }
    case VIDIOC_G_CTRL:
    {
        struct v4l2_control *vc = arg;
        int i;

        for (i = MAXCONTROLS - 1; i >= 0; i--) {
            if (mxb_controls[i].id == vc->id)
                break;
        }

        if (i < 0)
            return -EAGAIN;

        if (vc->id == V4L2_CID_AUDIO_MUTE) {
            vc->value = mxb->cur_mute;
            DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value));
            return 0;
        }

        DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value));
        return 0;
    }

    case VIDIOC_S_CTRL:
    {
        struct v4l2_control *vc = arg;
        int i = 0;

        for (i = MAXCONTROLS - 1; i >= 0; i--) {
            if (mxb_controls[i].id == vc->id)
                break;
        }

        if (i < 0)
            return -EAGAIN;

        if (vc->id == V4L2_CID_AUDIO_MUTE) {
            mxb->cur_mute = vc->value;
            if (!vc->value) {
                /* switch the audio-source */
                mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH,
                                                &TEA6420_line[video_audio_connect[mxb->cur_input]][0]);
                mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH,
                                                &TEA6420_line[video_audio_connect[mxb->cur_input]][1]);
            } else {
                mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH,
                                                &TEA6420_line[6][0]);
                mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH,
                                                &TEA6420_line[6][1]);
            }
            DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n", vc->value));
        }
        return 0;
    }
    case VIDIOC_G_INPUT:
    {
        int *input = (int *)arg;
        *input = mxb->cur_input;

        DEB_EE(("VIDIOC_G_INPUT %d.\n", *input));
        return 0;
    }
    case VIDIOC_S_INPUT:
    {
        int input = *(int *)arg;
        struct tea6415c_multiplex vm;
        struct v4l2_routing route;
        int i = 0;

        DEB_EE(("VIDIOC_S_INPUT %d.\n", input));

        if (input < 0 || input >= MXB_INPUTS)
            return -EINVAL;

        mxb->cur_input = input;

        saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source,
                                        input_port_selection[input].hps_sync);

        /* prepare switching of tea6415c and saa7111a;
           have a look at the 'background'-file for further informations  */
        switch (input) {
        case TUNER:
            i = SAA7115_COMPOSITE0;
            vm.in  = 3;
            vm.out = 17;

            if (mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm)) {
                printk(KERN_ERR "VIDIOC_S_INPUT: could not address tea6415c #1\n");
                return -EFAULT;
            }
            /* connect tuner-output always to multicable */
            vm.in  = 3;
            vm.out = 13;
            break;
        case AUX3_YC:
            /* nothing to be done here. aux3_yc is
               directly connected to the saa711a */
            i = SAA7115_SVIDEO1;
            break;
        case AUX3:
            /* nothing to be done here. aux3 is
               directly connected to the saa711a */
            i = SAA7115_COMPOSITE1;
            break;
        case AUX1:
            i = SAA7115_COMPOSITE0;
            vm.in  = 1;
            vm.out = 17;
            break;
        }

        /* switch video in tea6415c only if necessary */
        switch (input) {
        case TUNER:
        case AUX1:
            if (mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm)) {
                printk(KERN_ERR "VIDIOC_S_INPUT: could not address tea6415c #3\n");
                return -EFAULT;
            }
            break;
        default:
            break;
        }

        /* switch video in saa7111a */
        route.input = i;
        route.output = 0;
        if (mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_VIDEO_ROUTING, &route))
            printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n");

        /* switch the audio-source only if necessary */
        if( 0 == mxb->cur_mute ) {
            mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH,
                                            &TEA6420_line[video_audio_connect[input]][0]);
            mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH,
                                            &TEA6420_line[video_audio_connect[input]][1]);
        }

        return 0;
    }
    case VIDIOC_G_TUNER:
    {
        struct v4l2_tuner *t = arg;

        if (t->index) {
            DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index));
            return -EINVAL;
        }

        DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index));

        memset(t, 0, sizeof(*t));
        i2c_clients_command(&mxb->i2c_adapter, cmd, arg);

        strlcpy(t->name, "TV Tuner", sizeof(t->name));
        t->type = V4L2_TUNER_ANALOG_TV;
        t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | \
                        V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
        t->audmode = mxb->cur_mode;
        return 0;
    }
    case VIDIOC_S_TUNER:
    {
        struct v4l2_tuner *t = arg;

        if (t->index) {
            DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index));
            return -EINVAL;
        }

        mxb->cur_mode = t->audmode;
        i2c_clients_command(&mxb->i2c_adapter, cmd, arg);
        return 0;
    }
    case VIDIOC_G_FREQUENCY:
    {
        struct v4l2_frequency *f = arg;

        if (mxb->cur_input) {
            DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",
                   mxb->cur_input));
            return -EINVAL;
        }

        *f = mxb->cur_freq;

        DEB_EE(("VIDIOC_G_FREQ: freq:0x%08x.\n", mxb->cur_freq.frequency));
        return 0;
    }
    case VIDIOC_S_FREQUENCY:
    {
        struct v4l2_frequency *f = arg;

        if (f->tuner)
            return -EINVAL;

        if (V4L2_TUNER_ANALOG_TV != f->type)
            return -EINVAL;

        if (mxb->cur_input) {
            DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n", mxb->cur_input));
            return -EINVAL;
        }

        mxb->cur_freq = *f;
        DEB_EE(("VIDIOC_S_FREQUENCY: freq:0x%08x.\n", mxb->cur_freq.frequency));

        /* tune in desired frequency */
        mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY, &mxb->cur_freq);

        /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */
        spin_lock(&dev->slock);
        vv->vbi_fieldcount = 0;
        spin_unlock(&dev->slock);

        return 0;
    }
    case MXB_S_AUDIO_CD:
    {
        int i = *(int*)arg;

        if (i < 0 || i >= MXB_AUDIOS) {
            DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i));
            return -EINVAL;
        }

        DEB_EE(("MXB_S_AUDIO_CD: i:%d.\n",i));

        mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[i][0]);
        mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[i][1]);

        return 0;
    }
    case MXB_S_AUDIO_LINE:
    {
        int i = *(int*)arg;

        if (i < 0 || i >= MXB_AUDIOS) {
            DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i));
            return -EINVAL;
        }

        DEB_EE(("MXB_S_AUDIO_LINE: i:%d.\n",i));
        mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[i][0]);
        mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[i][1]);

        return 0;
    }
    case VIDIOC_G_AUDIO:
    {
        struct v4l2_audio *a = arg;

        if (a->index < 0 || a->index > MXB_INPUTS) {
            DEB_D(("VIDIOC_G_AUDIO %d out of range.\n", a->index));
            return -EINVAL;
        }

        DEB_EE(("VIDIOC_G_AUDIO %d.\n", a->index));
        memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio));

        return 0;
    }
    case VIDIOC_S_AUDIO:
    {
        struct v4l2_audio *a = arg;

        DEB_D(("VIDIOC_S_AUDIO %d.\n", a->index));
        return 0;
    }
#ifdef CONFIG_VIDEO_ADV_DEBUG
    case VIDIOC_DBG_S_REGISTER:
    case VIDIOC_DBG_G_REGISTER:
        i2c_clients_command(&mxb->i2c_adapter, cmd, arg);
        return 0;
#endif
    default:
        /*
        		DEB2(printk("does not handle this ioctl.\n"));
        */
        return -ENOIOCTLCMD;
    }
    return 0;
}

static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
{
    struct mxb *mxb = (struct mxb *)dev->ext_priv;
    int zero = 0;
    int one = 1;

    if (V4L2_STD_PAL_I == standard->id) {
        v4l2_std_id std = V4L2_STD_PAL_I;

        DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
        /* set the 7146 gpio register -- I don't know what this does exactly */
        saa7146_write(dev, GPIO_CTRL, 0x00404050);
        /* unset the 7111 gpio register -- I don't know what this does exactly */
        mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_GPIO, &zero);
        mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
    } else {
        v4l2_std_id std = V4L2_STD_PAL_BG;

        DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
        /* set the 7146 gpio register -- I don't know what this does exactly */
        saa7146_write(dev, GPIO_CTRL, 0x00404050);
        /* set the 7111 gpio register -- I don't know what this does exactly */
        mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_GPIO, &one);
        mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
    }
    return 0;
}

static struct saa7146_standard standard[] = {
    {
        .name	= "PAL-BG", 	.id	= V4L2_STD_PAL_BG,
        .v_offset	= 0x17,	.v_field 	= 288,
        .h_offset	= 0x14,	.h_pixels 	= 680,
        .v_max_out	= 576,	.h_max_out	= 768,
    }, {
        .name	= "PAL-I", 	.id	= V4L2_STD_PAL_I,
Exemplo n.º 7
0
void bttv_call_i2c_clients(struct bttv *btv, unsigned int cmd, void *arg)
{
	if (0 != btv->i2c_rc)
		return;
	i2c_clients_command(&btv->i2c_adap, cmd, arg);
}
Exemplo n.º 8
0
/*
 * Finalize the GO7007 hardware setup, register the on-board I2C adapter
 * (if used on this board), load the I2C client driver for the sensor
 * (SAA7115 or whatever) and other devices, and register the ALSA and V4L2
 * interfaces.
 *
 * Must NOT be called with the hw_lock held.
 */
int go7007_register_encoder(struct go7007 *go)
{
	int i, ret;

	printk(KERN_INFO "go7007: registering new %s\n", go->name);

	down(&go->hw_lock);
	ret = go7007_init_encoder(go);
	up(&go->hw_lock);
	if (ret < 0)
		return -1;

	if (!go->i2c_adapter_online &&
			go->board_info->flags & GO7007_BOARD_USE_ONBOARD_I2C) {
		if (go7007_i2c_init(go) < 0)
			return -1;
		go->i2c_adapter_online = 1;
	}
	if (go->i2c_adapter_online) {
		for (i = 0; i < go->board_info->num_i2c_devs; ++i)
			init_i2c_module(&go->i2c_adapter,
					go->board_info->i2c_devs[i].id,
					go->board_info->i2c_devs[i].addr);
#ifdef TUNER_SET_TYPE_ADDR
		if (go->tuner_type >= 0) {
			struct tuner_setup tun_setup = {
				.mode_mask	= T_ANALOG_TV,
				.addr		= ADDR_UNSET,
				.type		= go->tuner_type
			};
			i2c_clients_command(&go->i2c_adapter,
				TUNER_SET_TYPE_ADDR, &tun_setup);
		}
#else
		if (go->tuner_type >= 0)
			i2c_clients_command(&go->i2c_adapter,
				TUNER_SET_TYPE, &go->tuner_type);
#endif
		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
			i2c_clients_command(&go->i2c_adapter,
				DECODER_SET_CHANNEL, &go->channel_number);
	}
	if (go->board_info->flags & GO7007_BOARD_HAS_AUDIO) {
		go->audio_enabled = 1;
		go7007_snd_init(go);
	}
	return go7007_v4l2_init(go);
}
EXPORT_SYMBOL(go7007_register_encoder);

/*
 * Send the encode firmware to the encoder, which will cause it
 * to immediately start delivering the video and audio streams.
 *
 * Must be called with the hw_lock held.
 */
int go7007_start_encoder(struct go7007 *go)
{
	u8 *fw;
	int fw_len, rv = 0, i;
	u16 intr_val, intr_data;

	go->modet_enable = 0;
	if (!go->dvd_mode)
		for (i = 0; i < 4; ++i) {
			if (go->modet[i].enable) {
				go->modet_enable = 1;
				continue;
			}
			go->modet[i].pixel_threshold = 32767;
			go->modet[i].motion_threshold = 32767;
			go->modet[i].mb_threshold = 32767;
		}

	if (go7007_construct_fw_image(go, &fw, &fw_len) < 0)
		return -1;

	if (go7007_send_firmware(go, fw, fw_len) < 0 ||
			go7007_read_interrupt(go, &intr_val, &intr_data) < 0) {
		printk(KERN_ERR "go7007: error transferring firmware\n");
		rv = -1;
		goto start_error;
	}

	go->state = STATE_DATA;
	go->parse_length = 0;
	go->seen_frame = 0;
	if (go7007_stream_start(go) < 0) {
		printk(KERN_ERR "go7007: error starting stream transfer\n");
		rv = -1;
		goto start_error;
	}

start_error:
	kfree(fw);
	return rv;
}
Exemplo n.º 9
0
static int sharp10x19_cmd_panel_reset(struct mdfld_dsi_config *dsi_config)
{
	int ret = 0;
	u8 *vaddr = NULL, *vaddr1 = NULL;
	struct drm_device *dev = dsi_config->dev;
	int reg_value_scl = 0;

	PSB_DEBUG_ENTRY("\n");
	if (is_dual_panel(dev)) {
		struct i2c_adapter *adapter;
		u8 i2_data[4];
		adapter = i2c_get_adapter(EXPANDER_BUS_NUMBER);
		if (adapter) {
			i2_data[0] = 0x4;
			i2_data[1] = 0x0;
			i2c_clients_command(adapter, 1, i2_data);
			i2_data[0] = 0x5;
			i2_data[1] = 0x3;
			i2c_clients_command(adapter, 1, i2_data);
		}
	}
	/* Because when reset touchscreen panel, touchscreen will pull i2c bus
	 * to low, sometime this operation will cause i2c bus enter into wrong
	 * status, so before reset, switch i2c scl pin */
	vaddr1 = ioremap(SECURE_I2C_FLIS_REG, 4);
	reg_value_scl = ioread32(vaddr1);
	reg_value_scl &= ~0x1000;
	rpmsg_send_generic_raw_command(RP_INDIRECT_WRITE, 0,
					(u8 *)&reg_value_scl, 4,
					NULL, 0,
					SECURE_I2C_FLIS_REG, 0);

	__vpro2_power_ctrl(true);
	usleep_range(2000, 2500);

	if (bias_en_gpio == 0) {
		bias_en_gpio = 189;
		ret = gpio_request(bias_en_gpio, "bias_enable");
		if (ret) {
			DRM_ERROR("Faild to request bias_enable gpio\n");
			return -EINVAL;
		}
		gpio_direction_output(bias_en_gpio, 0);
		pr_info("gpio_bias_enable=%d\n", bias_en_gpio);
	}

	_get_panel_reset_gpio(is_dual_panel(dev));

	gpio_direction_output(bias_en_gpio, 0);
	gpio_direction_output(mipi_reset_gpio, 0);
	if (is_dual_panel(dev))
		gpio_direction_output(mipic_reset_gpio, 0);
	gpio_set_value_cansleep(bias_en_gpio, 0);
	gpio_set_value_cansleep(mipi_reset_gpio, 0);
	if (is_dual_panel(dev))
		gpio_set_value_cansleep(mipic_reset_gpio, 0);
	usleep_range(2000, 2500);
	gpio_set_value_cansleep(bias_en_gpio, 1);
	usleep_range(2000, 2500);
	gpio_set_value_cansleep(mipi_reset_gpio, 1);
	usleep_range(2000, 2500);
	if (is_dual_panel(dev)) {
		gpio_set_value_cansleep(mipic_reset_gpio, 1);
		usleep_range(3000, 3500);
	}
	vaddr = ioremap(0xff0c2d00, 0x60);
	iowrite32(0x3221, vaddr + 0x1c);
	usleep_range(2000, 2500);
	iounmap(vaddr);

	/* switch i2c scl pin back */
	reg_value_scl |= 0x1000;
	rpmsg_send_generic_raw_command(RP_INDIRECT_WRITE, 0,
					(u8 *)&reg_value_scl, 4,
					NULL, 0,
					SECURE_I2C_FLIS_REG, 0);
	iounmap(vaddr1);
	return 0;
}