static void
i4b_capi_bch_config(int unit, int chan, int bprot, int activate)
{
capi_softc_t *sc = capi_sc[unit];
i4b_Bcleanifq(&sc->sc_bchan[chan].tx_queue);
sc->sc_bchan[chan].tx_queue.ifq_maxlen = IFQ_MAXLEN;
sc->sc_bchan[chan].txcount = 0;
/* The telephony drivers use rx_queue for receive. */
i4b_Bcleanifq(&sc->sc_bchan[chan].rx_queue);
sc->sc_bchan[chan].rx_queue.ifq_maxlen = IFQ_MAXLEN;
sc->sc_bchan[chan].rxcount = 0;
/* HDLC frames are put to in_mbuf */
i4b_Bfreembuf(sc->sc_bchan[chan].in_mbuf);
sc->sc_bchan[chan].in_mbuf = NULL;
/* Because of the difference, we need to remember the protocol. */
sc->sc_bchan[chan].bprot = bprot;
sc->sc_bchan[chan].busy = 0;
}
/*---------------------------------------------------------------------------*
* initialize one B channels rx/tx data structures
*---------------------------------------------------------------------------*/
void
iwic_bchannel_setup(int unit, int chan_no, int bprot, int activate)
{
struct iwic_softc *sc = &iwic_sc[unit];
struct iwic_bchan *chan = &sc->sc_bchan[chan_no];
crit_enter();
NDBGL1(L1_BCHAN, "unit %d, chan %d, bprot %d, activate %d", unit, chan_no, bprot, activate);
/* general part */
chan->bprot = bprot; /* B channel protocol */
chan->state = ST_IDLE; /* B channel state */
if(activate == 0)
{
/* deactivation */
iwic_bchan_init(sc, chan_no, activate);
}
/* receiver part */
chan->rx_queue.ifq_maxlen = IFQ_MAXLEN;
i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */
chan->rxcount = 0; /* reset rx counter */
i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */
chan->in_mbuf = NULL; /* reset mbuf ptr */
chan->in_cbptr = NULL; /* reset mbuf curr ptr */
chan->in_len = 0; /* reset mbuf data len */
/* transmitter part */
chan->tx_queue.ifq_maxlen = IFQ_MAXLEN;
i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */
chan->txcount = 0; /* reset tx counter */
i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */
chan->out_mbuf_head = NULL; /* reset head mbuf ptr */
chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */
chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */
chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */
if(activate != 0)
{
/* activation */
iwic_bchan_init(sc, chan_no, activate);
}
crit_exit();
}
/*---------------------------------------------------------------------------*
* initialize one B channels rx/tx data structures and init/deinit HSCX
*---------------------------------------------------------------------------*/
void
isic_bchannel_setup(int unit, int h_chan, int bprot, int activate)
{
struct l1_softc *sc = &l1_sc[unit];
l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
crit_enter();
if(activate == 0)
{
/* deactivation */
isic_hscx_init(sc, h_chan, activate);
}
NDBGL1(L1_BCHAN, "unit=%d, channel=%d, %s",
sc->sc_unit, h_chan, activate ? "activate" : "deactivate");
/* general part */
chan->unit = sc->sc_unit; /* unit number */
chan->channel = h_chan; /* B channel */
chan->bprot = bprot; /* B channel protocol */
chan->state = HSCX_IDLE; /* B channel state */
/* receiver part */
chan->rx_queue.ifq_maxlen = IFQ_MAXLEN;
i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */
chan->rxcount = 0; /* reset rx counter */
i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */
chan->in_mbuf = NULL; /* reset mbuf ptr */
chan->in_cbptr = NULL; /* reset mbuf curr ptr */
chan->in_len = 0; /* reset mbuf data len */
/* transmitter part */
chan->tx_queue.ifq_maxlen = IFQ_MAXLEN;
i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */
chan->txcount = 0; /* reset tx counter */
i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */
chan->out_mbuf_head = NULL; /* reset head mbuf ptr */
chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */
chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */
chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */
if(activate != 0)
{
/* activation */
isic_hscx_init(sc, h_chan, activate);
}
crit_exit();
}
static void
avm_pnp_bchannel_setup(int unit, int h_chan, int bprot, int activate)
{
struct isic_softc *sc = &isic_sc[unit];
isic_Bchan_t *chan = &sc->sc_chan[h_chan];
int s = SPLI4B();
if(activate == 0)
{
/* deactivation */
chan->state &= ~HSCX_AVMPNP_ACTIVE;
avm_pnp_hscx_init(sc, h_chan, activate);
}
DBGL1(L1_BCHAN, "avm_pnp_bchannel_setup", ("unit=%d, channel=%d, %s\n",
sc->sc_unit, h_chan, activate ? "activate" : "deactivate"));
/* general part */
chan->unit = sc->sc_unit; /* unit number */
chan->channel = h_chan; /* B channel */
chan->bprot = bprot; /* B channel protocol */
chan->state = HSCX_IDLE; /* B channel state */
/* receiver part */
i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */
chan->rx_queue.ifq_maxlen = IFQ_MAXLEN;
chan->rxcount = 0; /* reset rx counter */
i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */
chan->in_mbuf = NULL; /* reset mbuf ptr */
chan->in_cbptr = NULL; /* reset mbuf curr ptr */
chan->in_len = 0; /* reset mbuf data len */
/* transmitter part */
i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */
chan->tx_queue.ifq_maxlen = IFQ_MAXLEN;
chan->txcount = 0; /* reset tx counter */
i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */
chan->out_mbuf_head = NULL; /* reset head mbuf ptr */
chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */
chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */
chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */
if(activate != 0)
{
/* activation */
avm_pnp_hscx_init(sc, h_chan, activate);
chan->state |= HSCX_AVMPNP_ACTIVE;
}
splx(s);
}
