Exemplo n.º 1
0
void mainboard_romstage_entry(unsigned long bist)
{
	if (bist == 0)
		enable_lapic();

	i5000_lpc_config();

	winbond_enable_serial(PNP_DEV(0x2e, 2), 0x3f8);

	console_init();

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	early_config();

	setup_gpio();

	enable_smbus();

        smbus_write_byte(0x6f, 0x00, 0x63);
        smbus_write_byte(0x6f, 0x01, 0x04);
        smbus_write_byte(0x6f, 0x02, 0x53);
        smbus_write_byte(0x6f, 0x03, 0x39);
        smbus_write_byte(0x6f, 0x08, 0x06);
        smbus_write_byte(0x6f, 0x09, 0x00);

	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, (uintptr_t)DEFAULT_RCBA | 1);
	i5000_fbdimm_init();
	smbus_write_byte(0x69, 0x01, 0x01);
}
Exemplo n.º 2
0
void main(unsigned long bist)
{
	if (bist == 0)
		enable_lapic();

	i5000_lpc_config();

	w83627hf_enable_serial(PNP_DEV(0x2e, 2), 0x3f8);

	console_init();

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	early_config();

	setup_gpio();

	enable_smbus();

	/* setup PCIe MMCONF base address */
	pci_write_config32(PCI_DEV(0, 16, 0), 0x64,
			   CONFIG_MMCONF_BASE_ADDRESS >> 16);

        smbus_write_byte(0x6f, 0x00, 0x63);
        smbus_write_byte(0x6f, 0x01, 0x04);
        smbus_write_byte(0x6f, 0x02, 0x53);
        smbus_write_byte(0x6f, 0x03, 0x39);
        smbus_write_byte(0x6f, 0x08, 0x06);
        smbus_write_byte(0x6f, 0x09, 0x00);

	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, DEFAULT_RCBA | 1);
	i5000_fbdimm_init();
	smbus_write_byte(0x69, 0x01, 0x01);
}
Exemplo n.º 3
0
void main(unsigned long bist)
{
	if (bist == 0)
		enable_lapic();

	i5000_lpc_config();

	w83627hf_enable_serial(PNP_DEV(0x2e, 2), 0x3f8);

	console_init();

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	early_config();

	setup_gpio();

	enable_smbus();

	/* setup PCIe MMCONF base address */
	pci_write_config32(PCI_DEV(0, 16, 0), 0x64,
			   CONFIG_MMCONF_BASE_ADDRESS >> 16);

	outb(0x07, 0x11b8);

	/* These are smbus write captured with serialice. They
	   seem to setup the clock generator */

	smbus_write_byte(0x6f, 0x88, 0x1f);
	smbus_write_byte(0x6f, 0x81, 0xff);
	smbus_write_byte(0x6f, 0x82, 0xff);
	smbus_write_byte(0x6f, 0x80, 0x23);

	outb(0x03, 0x11b8);
	outb(0x01, 0x11b8);

	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, DEFAULT_RCBA | 1);
	i5000_fbdimm_init();
	smbus_write_byte(0x69, 0x01, 0x01);
}
Exemplo n.º 4
0
void mainboard_romstage_entry(unsigned long bist)
{
	if (bist == 0)
		enable_lapic();

	i5000_lpc_config();

	winbond_enable_serial(SERIAL_DEV, 0x3f8);
	console_init();

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	early_config();

	setup_gpio();

	enable_smbus();

	outb(0x07, 0x11b8);

	/* These are smbus write captured with serialice. They
	   seem to setup the clock generator */

	smbus_write_byte(0x6f, 0x88, 0x1f);
	smbus_write_byte(0x6f, 0x81, 0xff);
	smbus_write_byte(0x6f, 0x82, 0xff);
	smbus_write_byte(0x6f, 0x80, 0x23);

	outb(0x03, 0x11b8);
	outb(0x01, 0x11b8);

	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, (uintptr_t)DEFAULT_RCBA | 1);
	i5000_fbdimm_init();
	smbus_write_byte(0x69, 0x01, 0x01);
}