static int
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
int usig = signr_convert(sig);
int ret;
/* Set up the stack frame */
if (is_ia32) {
if (ka->sa.sa_flags & SA_SIGINFO)
ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
else
ret = ia32_setup_frame(usig, ka, set, regs);
} else
ret = __setup_rt_frame(sig, ka, info, set, regs);
if (ret) {
force_sigsegv(sig, current);
return -EFAULT;
}
return ret;
}
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
int ret;
#ifdef DEBUG_SIG
printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n",
current->pid, sig,
regs->rip, regs->rsp, regs);
#endif
/* Are we from a system call? */
if ((long)regs->orig_rax >= 0) {
/* If so, check system call restarting.. */
switch (regs->rax) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->rax = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->rax = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->rax = regs->orig_rax;
regs->rip -= 2;
break;
}
}
/*
* If TF is set due to a debugger (PT_DTRACE), clear the TF
* flag so that register information in the sigcontext is
* correct.
*/
if (unlikely(regs->eflags & TF_MASK)) {
if (likely(current->ptrace & PT_DTRACE)) {
current->ptrace &= ~PT_DTRACE;
regs->eflags &= ~TF_MASK;
}
}
#ifdef CONFIG_IA32_EMULATION
if (test_thread_flag(TIF_IA32)) {
if (ka->sa.sa_flags & SA_SIGINFO)
ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
else
ret = ia32_setup_frame(sig, ka, oldset, regs);
} else
#endif
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret == 0) {
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
}
return ret;
}
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
int ret;
#ifdef DEBUG_SIG
printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n",
current->pid, sig,
regs->rip, regs->rsp, regs);
#endif
/* Are we from a system call? */
if (current_syscall(regs) >= 0) {
/* If so, check system call restarting.. */
switch (current_syscall_ret(regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->rax = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->rax = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->rax = regs->orig_rax;
regs->rip -= 2;
break;
}
}
/*
* If TF is set due to a debugger (TIF_FORCED_TF), clear the TF flag so
* that register information in the sigcontext is correct.
*/
if (unlikely(regs->eflags & TF_MASK)
&& likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
regs->eflags &= ~TF_MASK;
#ifdef CONFIG_IA32_EMULATION
if (test_thread_flag(TIF_IA32)) {
if (ka->sa.sa_flags & SA_SIGINFO)
ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
else
ret = ia32_setup_frame(sig, ka, oldset, regs);
} else
#endif
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret == 0) {
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->eflags &= ~(TF_MASK | X86_EFLAGS_DF);
tracehook_report_handle_signal(sig, ka, oldset, regs);
}
return ret;
}
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
int ret;
/* Are we from a system call? */
if (current_syscall(regs) >= 0) {
/* If so, check system call restarting.. */
switch (current_syscall_ret(regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ax = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
break;
}
}
/*
* If TF is set due to a debugger (TIF_FORCED_TF), clear the TF
* flag so that register information in the sigcontext is correct.
*/
if (unlikely(regs->flags & X86_EFLAGS_TF) &&
likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
regs->flags &= ~X86_EFLAGS_TF;
#ifdef CONFIG_IA32_EMULATION
if (test_thread_flag(TIF_IA32)) {
if (ka->sa.sa_flags & SA_SIGINFO)
ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
else
ret = ia32_setup_frame(sig, ka, oldset, regs);
} else
#endif
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret == 0) {
/*
* This has nothing to do with segment registers,
* despite the name. This magic affects uaccess.h
* macros' behavior. Reset it to the normal setting.
*/
set_fs(USER_DS);
/*
* Clear the direction flag as per the ABI for function entry.
*/
regs->flags &= ~X86_EFLAGS_DF;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
}
return ret;
}
