/*
* Add an Edge computed externally. The label on the Edge is assumed
* to be correct.
*/
void
GeometryGraph::addEdge(Edge *e)
{
insertEdge(e);
const CoordinateSequence* coord=e->getCoordinates();
// insert the endpoint as a node, to mark that it is on the boundary
insertPoint(argIndex,coord->getAt(0),Location::BOUNDARY);
insertPoint(argIndex,coord->getAt(coord->getSize()-1),Location::BOUNDARY);
}
void Foam::CV2D::insertBoundingBox()
{
Info<< "insertBoundingBox: creating bounding mesh" << endl;
scalar bigSpan = 10*meshControls().span();
insertPoint(point2D(-bigSpan, -bigSpan), Vb::FAR_POINT);
insertPoint(point2D(-bigSpan, bigSpan), Vb::FAR_POINT);
insertPoint(point2D(bigSpan, -bigSpan), Vb::FAR_POINT);
insertPoint(point2D(bigSpan, bigSpan), Vb::FAR_POINT);
}
void KarbonCalligraphicShape::appendPointsToPathAux(const QPointF &p1,
const QPointF &p2)
{
KoPathPoint *pathPoint1 = new KoPathPoint(this, p1);
KoPathPoint *pathPoint2 = new KoPathPoint(this, p2);
// calculate the index of the insertion position
int index = pointCount() / 2;
insertPoint(pathPoint2, KoPathPointIndex(0, index));
insertPoint(pathPoint1, KoPathPointIndex(0, index));
}
void CQuadTree::insertPoint(int x, int y, int hashvalue, CNode * root)
{
// hash set
//if (root->m_hashSet.find(hashvalue) == root->m_hashSet.end())
// root->m_hashSet.insert(hashvalue);
if (root->m_children[0] != NULL)
{
int idx = root->getIndex(x, y);
insertPoint(x, y, hashvalue, root->m_children[idx]);
}
else
{
map<unsigned int, Template*> &data = root->m_data;
if (data.find(hashvalue) == data.end())
{
data[hashvalue] = new Template(x,y);
}
else
{
Template* tmp = new Template(x, y);
tmp->next = data[hashvalue];
data[hashvalue] = tmp;
}
root->m_count++;
// split
if (root->m_count > m_nodeCapacity && root->m_depth < m_maxDepth)
{
root->split();
}
}
}
void ofxPolygonMask::mousePressed(ofMouseEventArgs &m) {
if(doPoint) {
focusedPoint = insertPoint(ofVec3f(m.x, m.y, 20));
selectedPoint = focusedPoint;
return;
} else if(doDelete) {
for(int i = 0; i < points.size(); i++) {
if(sqrDist(m.x, m.y, points[i].x, points[i].y)<SQR_DIST_POINT_GRAB) { // 5 pixels distance
points.erase(points.begin()+i);
return;
}
}
}
for(int i = 0; i < points.size(); i++) {
if(sqrDist(m.x, m.y, points[i].x, points[i].y)<SQR_DIST_POINT_GRAB) { // 5 pixels distance
selectedPoint = i;
focusedPoint = i;
//points[selectedPoint].x = m.x;
//points[selectedPoint].y = m.y;
}
}
}
void KarbonCalligraphicShape::addCap(int index1, int index2, int pointIndex,
bool inverted)
{
QPointF p1 = m_points[index1]->point();
QPointF p2 = m_points[index2]->point();
// TODO: review why spikes can appear with a lower limit
QPointF delta = p2 - p1;
if (delta.manhattanLength() < 1.0)
return;
QPointF direction = QLineF(QPointF(0, 0), delta).unitVector().p2();
qreal width = m_points[index2]->width();
QPointF p = p2 + direction * m_caps * width;
KoPathPoint * newPoint = new KoPathPoint(this, p);
qreal angle = m_points[index2]->angle();
if (inverted)
angle += M_PI;
qreal dx = std::cos(angle) * width;
qreal dy = std::sin(angle) * width;
newPoint->setControlPoint1(QPointF(p.x() - dx / 2, p.y() - dy / 2));
newPoint->setControlPoint2(QPointF(p.x() + dx / 2, p.y() + dy / 2));
insertPoint(newPoint, KoPathPointIndex(0, pointIndex));
}
/**
* This method simply ensures presence of two points and
* adds the needed points for self associations.
*/
void AssociationLine::calculateInitialEndPoints()
{
if (m_associationWidget->isSelf() && count() < 4) {
for (int i = count(); i < 4; ++i) {
insertPoint(i, QPointF());
}
UMLWidget *wid = m_associationWidget->widgetForRole(Uml::RoleType::B);
if (!wid) {
uError() << "AssociationWidget is partially constructed."
"UMLWidget for role B is null.";
return;
}
const QRectF rect = m_associationWidget->mapFromScene(
mapToScene(wid->rect()).boundingRect()).boundingRect();
qreal l = rect.left() + .25 * rect.width();
qreal r = rect.left() + .75 * rect.width();
bool drawAbove = rect.top() >= SelfAssociationMinimumHeight;
qreal y = drawAbove ? rect.top() : rect.bottom();
qreal yOffset = SelfAssociationMinimumHeight;
if (drawAbove) {
yOffset *= -1.0;
}
setPoint(0, QPointF(l, y));
setPoint(1, QPointF(l, y + yOffset));
setPoint(2, QPointF(r, y + yOffset));
setPoint(3, QPointF(r, y));
} else if (!m_associationWidget->isSelf() && count() < 2) {
setEndPoints(QPointF(), QPointF());
}
}
void CQuadTree::insertPoint(int x, int y, int hashvalue)
{
if (m_root == NULL)
m_root = new CNode(0, 0, m_rangeX, m_rangeY, 0);
insertPoint(x, y, hashvalue, m_root);
}
/**
* For a cubic Bezier curve at least four points are needed.
* If there are less, the missing points will be created.
* Note: Implementation is only for two points.
*/
void AssociationLine::createSplinePoints()
{
if (m_points.size() == 2) { // create two points
QPointF p1 = m_points.first(); // start point
QPointF p2 = m_points.last(); // end point
qreal dx = p2.x() - p1.x();
qreal dy = p2.y() - p1.y();
qreal oneThirdX = 0.33 * dx;
qreal oneThirdY = 0.33 * dy;
QPointF c1(p1.x() + oneThirdX, // control point 1
p1.y() - oneThirdY);
QPointF c2(p2.x() - oneThirdX, // control point 2
p2.y() + oneThirdY);
insertPoint(1, c1);
insertPoint(2, c2);
}
if (m_points.size() == 3) { // create one point
// insertPoint(1 or 2, );
// Note: For now we use a quadratic Bezier curve in createBezierCurve(...).
}
}
U32 OptimizedPolyList::insertVertex(const Point3F& point, const Point3F& normal,
const Point2F& uv0, const Point2F& uv1)
{
VertIndex vert;
vert.vertIdx = insertPoint(point);
vert.normalIdx = insertNormal(normal);
vert.uv0Idx = insertUV0(uv0);
vert.uv1Idx = insertUV1(uv1);
return mVertexList.push_back_unique(vert);
}
void init(TRIANGLE * t, int n)
{
for(int i = 0; i < n; ++i)
{
vec3f v1(t[i].p[0].x,t[i].p[0].y,t[i].p[0].z);
vec3f v2(t[i].p[1].x,t[i].p[1].y,t[i].p[1].z);
vec3f v3(t[i].p[2].x,t[i].p[2].y,t[i].p[2].z);
Tri tri;
tri.i = insertPoint(v1);
tri.j = insertPoint(v2);
tri.k = insertPoint(v3);
tri.norm = vec3f(t[i].norm.x,t[i].norm.y, t[i].norm.z);
tris.push_back(tri);
}
std::cout << "Inserted " << vecs.size() << " unique points from " << n*3 << "original points\n";
calcNormals();
}
bool shp_polyline::read( FILE * f, int & bytesRead )
{
shape::read( f, bytesRead );
int type;
fread(&type,sizeof(int),1,f);
bytesRead += sizeof(int);
if(type != API_SHP_POLYLINE)
{ cout << "Shape type does not match in record."<<endl;
return false;
}
//input Bounding Box
//Assign Class Variables topLeft && bottomRight
double mybounds[4];
fread(mybounds,sizeof(double),4,f);
bytesRead += sizeof(double)*4;
topLeft = api_point( mybounds[0], mybounds[3] );
bottomRight = api_point( mybounds[2], mybounds[1] );
//input Number of Parts and Number of Points
int numParts = 0;
int numPoints = 0;
fread(&numParts,sizeof(int),1,f);
bytesRead += sizeof(int);
fread(&numPoints,sizeof(int),1,f);
bytesRead += sizeof(int);
//Allocate space for numparts
int * p_parts = new int[numParts];
fread(p_parts,sizeof(int),numParts,f);
bytesRead += sizeof(int)*numParts;
//Input parts
for( int j = 0; j < numParts; j++ )
parts.push_back( p_parts[j] );
//Input points
double x,y;
for(int i=0;i<numPoints;i++)
{
fread(&x,sizeof(double),1,f);
bytesRead += sizeof(double);
fread(&y,sizeof(double),1,f);
bytesRead += sizeof(double);
api_point p(x,y);
insertPoint( p, i );
}
return true;
}
int DBTools::insertLine(INOUT Line& line)
{
int lineid = getIdByLine(line);
if(lineid != 0)
return lineid;
int from_point,to_point;
std::vector<Point3D> vPointTemp;
vPointTemp = line.getPoints();
//line
{
from_point = insertPoint(vPointTemp[0]);
to_point = insertPoint(vPointTemp[1]);
std::stringstream ss_from;
std::stringstream ss_to;
ss_from<<from_point;
ss_to<<to_point;
std::string sql="insert into line(from_point,to_point) values("+ss_from.str()+"," + ss_to.str()+ ");";
mysql_query(&myCont,sql.c_str());
lineid = mysql_insert_id(&myCont);
}
//shape points
for(int pcount = 1; pcount<vPointTemp.size()-1;pcount++)
{
std::stringstream ss_lineid;
std::stringstream ss_pointid;
std::stringstream ss_number;
ss_lineid<<lineid;
ss_pointid<<insertPoint(vPointTemp[pcount+1]);
ss_number<<pcount;
std::string sql="insert into shape_points(line_id,point_id,sequence_number) values("+ss_lineid.str()+"," + ss_pointid.str() + " ," + ss_number.str()+ ");";
mysql_query(&myCont,sql.c_str());
}
line.setId(lineid);
return lineid;
}
/*private*/
void
GeometryGraph::addSelfIntersectionNode(int argIndex,
const Coordinate& coord, int loc)
{
// if this node is already a boundary node, don't change it
if (isBoundaryNode(argIndex,coord)) return;
if (loc==Location::BOUNDARY && useBoundaryDeterminationRule)
{
insertBoundaryPoint(argIndex,coord);
}
else
{
insertPoint(argIndex,coord,loc);
}
}
/**
* Loads AssociationLine information saved in \a qElement XMI element.
*/
bool AssociationLine::loadFromXMI(QDomElement &qElement)
{
QString layout = qElement.attribute(QLatin1String("layout"), QLatin1String("polyline"));
m_layout = fromString(layout);
QDomNode node = qElement.firstChild();
m_points.clear();
QDomElement startElement = node.toElement();
if(startElement.isNull() || startElement.tagName() != QLatin1String("startpoint")) {
return false;
}
QString x = startElement.attribute(QLatin1String("startx"), QLatin1String("0"));
qreal nX = x.toFloat();
QString y = startElement.attribute(QLatin1String("starty"), QLatin1String("0"));
qreal nY = y.toFloat();
QPointF startPoint(nX, nY);
node = startElement.nextSibling();
QDomElement endElement = node.toElement();
if(endElement.isNull() || endElement.tagName() != QLatin1String("endpoint")) {
return false;
}
x = endElement.attribute(QLatin1String("endx"), QLatin1String("0"));
nX = x.toFloat();
y = endElement.attribute(QLatin1String("endy"), QLatin1String("0"));
nY = y.toFloat();
QPointF endPoint(nX, nY);
setEndPoints(startPoint, endPoint);
QPointF point;
node = endElement.nextSibling();
QDomElement element = node.toElement();
int i = 1;
while(!element.isNull()) {
if(element.tagName() == QLatin1String("point")) {
x = element.attribute(QLatin1String("x"), QLatin1String("0"));
y = element.attribute(QLatin1String("y"), QLatin1String("0"));
point.setX(x.toFloat());
point.setY(y.toFloat());
insertPoint(i++, point);
}
node = element.nextSibling();
element = node.toElement();
}
return true;
}
bool DBTools::insertPoints(INOUT std::vector<Point3D>& vPoint)
{
int insertid = 0;
std::vector<Point3D> vPointTemp = vPoint;
std::vector<Point3D>::iterator vPointIter = vPointTemp.begin();
while(vPointIter != vPointTemp.end())
{
insertid = insertPoint(*vPointIter);
if(insertid == 0)
return false;
vPointIter++;
}
return true;
}
bool shp_polyline::setMembers( std::deque<CString> members )
{ try
{ if( members.size() < 3 || ( members.size() - 1 )%2 != 0 )
throw( Exception("Cannot create shp_polyline ... wrong number of parameters.") );
if( members[0] != API_SHP_POLYLINE )
throw( Exception(" Cannot create shp_polyline. Shape type invalid." ) );
for( int i = 1; i < members.size(); i += 2 )
{ api_point p;
p.setX( CStringToDouble( members[i] ) );
p.setY( CStringToDouble( members[i+1] ) );
insertPoint( p, 0 );
}
return true;
}
catch( Exception e )
{ return false;
}
}
/*
* The left and right topological location arguments assume that the ring
* is oriented CW.
* If the ring is in the opposite orientation,
* the left and right locations must be interchanged.
*/
void
GeometryGraph::addPolygonRing(const LinearRing *lr, int cwLeft, int cwRight)
// throw IllegalArgumentException (see below)
{
// skip empty component (see bug #234)
if ( lr->isEmpty() ) return;
const CoordinateSequence *lrcl = lr->getCoordinatesRO();
CoordinateSequence* coord=CoordinateSequence::removeRepeatedPoints(lrcl);
if (coord->getSize()<4) {
hasTooFewPointsVar=true;
invalidPoint=coord->getAt(0); // its now a Coordinate
delete coord;
return;
}
int left=cwLeft;
int right=cwRight;
/*
* the isCCW call might throw an
* IllegalArgumentException if degenerate ring does
* not contain 3 distinct points.
*/
try
{
if (CGAlgorithms::isCCW(coord)) {
left=cwRight;
right=cwLeft;
}
}
catch(...)
{
delete coord;
throw;
}
Edge *e=new Edge(coord,new Label(argIndex,Location::BOUNDARY,left,right));
lineEdgeMap[lr]=e;
insertEdge(e);
insertPoint(argIndex,coord->getAt(0), Location::BOUNDARY);
}
bool LinePath::loadFromXMI( QDomElement & qElement ) {
QDomNode node = qElement.firstChild();
QDomElement startElement = node.toElement();
if( startElement.isNull() || startElement.tagName() != "startpoint" )
return false;
QString x = startElement.attribute( "startx", "0" );
int nX = x.toInt();
QString y = startElement.attribute( "starty", "0" );
int nY = y.toInt();
QPoint startPoint( nX, nY );
node = startElement.nextSibling();
QDomElement endElement = node.toElement();
if( endElement.isNull() || endElement.tagName() != "endpoint" )
return false;
x = endElement.attribute( "endx", "0" );
nX = x.toInt();
y = endElement.attribute( "endy", "0" );
nY = y.toInt();
QPoint endPoint( nX, nY );
setStartEndPoints( startPoint, endPoint );
QPoint point;
node = endElement.nextSibling();
QDomElement element = node.toElement();
int i = 1;
while( !element.isNull() ) {
if( element.tagName() == "point" ) {
x = element.attribute( "x", "0" );
y = element.attribute( "y", "0" );
point.setX( x.toInt() );
point.setY( y.toInt() );
insertPoint( i++, point );
}
node = element.nextSibling();
element = node.toElement();
}
return true;
}
void KarbonCalligraphicShape::addCap(int index1, int index2, int pointIndex,
bool inverted)
{
QPointF p1 = m_points[index1]->point();
QPointF p2 = m_points[index2]->point();
qreal width = m_points[index2]->width();
QPointF direction = QLineF(QPointF(0, 0), p2 - p1).unitVector().p2();
QPointF p = p2 + direction * m_caps * width;
KoPathPoint * newPoint = new KoPathPoint(this, p);
qreal angle = m_points[index2]->angle();
if (inverted)
angle += M_PI;
qreal dx = std::cos(angle) * width;
qreal dy = std::sin(angle) * width;
newPoint->setControlPoint1(QPointF(p.x() - dx / 2, p.y() - dy / 2));
newPoint->setControlPoint2(QPointF(p.x() + dx / 2, p.y() + dy / 2));
insertPoint(newPoint, KoPathPointIndex(0, pointIndex));
}
void KdTree::findNearby(Point* p, PointNode* node, int currentBest[], float currentBestDistancesSq[], int& nearbyCount, int axis)
{
insertPoint(p, currentBest, currentBestDistancesSq, nearbyCount, node->p);
float splitCoordDiff = axis == 0 ? p->x - node->p->x : p->y - node->p->y;
PointNode* primary = splitCoordDiff >= 0 ? node->right : node->left;
PointNode* secondary = splitCoordDiff >= 0 ? node->left : node->right;
if(primary)
{
findNearby(p, primary, currentBest, currentBestDistancesSq, nearbyCount, (axis + 1) % 2);
}
if(nearbyCount == 0 || splitCoordDiff * splitCoordDiff < currentBestDistancesSq[nearbyCount - 1])
{
if(secondary)
{
findNearby(p, secondary, currentBest, currentBestDistancesSq, nearbyCount, (axis + 1) % 2);
}
}
}
int DBTools::insertPaint(INOUT Paint& paint)
{
Surface sfTemp = paint.getSurface();
int sfId = insertSurface(sfTemp);
Point3D pTemp = paint.getLandMark();
int landmarkId = insertPoint(pTemp);
std::stringstream ss_surfaceid;
std::stringstream ss_landmark;
std::stringstream ss_R;
std::stringstream ss_G;
std::stringstream ss_B;
ss_surfaceid<<sfId;
ss_landmark<<landmarkId;
ss_R<<(uint32)paint.getColor().r;
ss_G<<(uint32)paint.getColor().g;
ss_B<<(uint32)paint.getColor().b;
std::string sql="insert into paint(surface_id,landmark_point,color_r,color_g,color_b) values("+ss_surfaceid.str()+ " , " + ss_landmark.str()+ " , " + ss_R.str()+ " , " + ss_G.str()+ " ," + ss_B.str()+ ");";
mysql_query(&myCont,sql.c_str());
int paintId = mysql_insert_id(&myCont);
paint.setId(paintId);
return paintId;
}
void DBTools::importdatafromNewcoToMaster()
{
std::string sql="select * from newco.points;";
int res=mysql_query(&myCont,sql.c_str());
if(!res)
{
MYSQL_RES *result = mysql_store_result(&myCont);
if(mysql_num_rows(result))
{
MYSQL_ROW sql_row;
Point3D pTemp;
while(sql_row=mysql_fetch_row(result))
{
pTemp.setId(atoi(sql_row[0]));
pTemp.setLatitude(atof(sql_row[1]));
pTemp.setLongitude(atof(sql_row[2]));
pTemp.setAltitude(atof(sql_row[3]));
insertPoint(pTemp);
}
}
mysql_free_result(result);
}
}
void KarbonCalligraphicShape::
appendPointToPath(const KarbonCalligraphicPoint &p)
{
qreal dx = std::cos(p.angle()) * p.width();
qreal dy = std::sin(p.angle()) * p.width();
// find the outline points
QPointF p1 = p.point() - QPointF(dx / 2, dy / 2);
QPointF p2 = p.point() + QPointF(dx / 2, dy / 2);
if (pointCount() == 0) {
moveTo(p1);
lineTo(p2);
normalize();
return;
}
// pointCount > 0
bool flip = (pointCount() >= 2) ? flipDetected(p1, p2) : false;
// if there was a flip add additional points
if (flip) {
appendPointsToPathAux(p2, p1);
if (pointCount() > 4)
smoothLastPoints();
}
appendPointsToPathAux(p1, p2);
if (pointCount() > 4) {
smoothLastPoints();
if (flip) {
int index = pointCount() / 2;
// find the last two points
KoPathPoint *last1 = pointByIndex(KoPathPointIndex(0, index - 1));
KoPathPoint *last2 = pointByIndex(KoPathPointIndex(0, index));
last1->removeControlPoint1();
last1->removeControlPoint2();
last2->removeControlPoint1();
last2->removeControlPoint2();
m_lastWasFlip = true;
}
if (m_lastWasFlip) {
int index = pointCount() / 2;
// find the previous two points
KoPathPoint *prev1 = pointByIndex(KoPathPointIndex(0, index - 2));
KoPathPoint *prev2 = pointByIndex(KoPathPointIndex(0, index + 1));
prev1->removeControlPoint1();
prev1->removeControlPoint2();
prev2->removeControlPoint1();
prev2->removeControlPoint2();
if (! flip)
m_lastWasFlip = false;
}
}
normalize();
// add initial cap if it's the fourth added point
// this code is here because this function is called from different places
// pointCount() == 8 may causes crashes because it doesn't take possible
// flips into account
if (m_points.count() >= 4 && &p == m_points[3]) {
kDebug(38000) << "Adding caps!!!!!!!!!!!!!!!!" << m_points.count();
addCap(3, 0, 0, true);
// duplicate the last point to make the points remain "balanced"
// needed to keep all indexes code (else I would need to change
// everything in the code...)
KoPathPoint *last = pointByIndex(KoPathPointIndex(0, pointCount() - 1));
KoPathPoint *newPoint = new KoPathPoint(this, last->point());
insertPoint(newPoint, KoPathPointIndex(0, pointCount()));
close();
}
}
/*
* Add a point computed externally. The point is assumed to be a
* Point Geometry part, which has a location of INTERIOR.
*/
void
GeometryGraph::addPoint(Coordinate& pt)
{
insertPoint(argIndex,pt,Location::INTERIOR);
}
void ImageNavigator::initializeActions() {
setAttribute(Qt::WA_DeleteOnClose);
menu = mainMenuBar->addMenu("Focus Viewer");
QSignalMapper *signalMap = new QSignalMapper(this);
QAction *showFullScreenAction = new QAction(tr("Show Full Screen"), this);
showFullScreenAction->setShortcut(tr("Ctrl+F"));
showFullScreenAction->setCheckable(true);
connect(showFullScreenAction, SIGNAL(toggled(bool)), this, SLOT(enableFullScreen(bool)));
menu->addAction(showFullScreenAction);
toggleInfoToolAction = new QAction(tr("Display Coordinate Info"), this);
toggleInfoToolAction->setShortcut(tr("I"));
toggleInfoToolAction->setCheckable(true);
addAction(toggleInfoToolAction);
connect(toggleInfoToolAction, SIGNAL(triggered()), this, SLOT(toggleInfoTool()));
menu->addAction(toggleInfoToolAction);
// #ifdef Q_OS_MAC
QMenu *zoomMenu = new QMenu("Zoom", this);
menu->addMenu(zoomMenu);
QAction *zoomInAction = new QAction(tr("Zoom In"), this);
zoomInAction->setShortcut(tr("."));
addAction(zoomInAction);
connect(zoomInAction, SIGNAL(triggered()), this, SLOT(zoomIn()));
zoomMenu->addAction(zoomInAction);
QAction *zoomOutAction = new QAction(tr("Zoom Out"), this);
zoomOutAction->setShortcut(tr(","));
addAction(zoomOutAction);
connect(zoomOutAction, SIGNAL(triggered()), this, SLOT(zoomOut()));
zoomMenu->addAction(zoomOutAction);
QAction *zoomStandardAction = new QAction(tr("Zoom Standard"), this);
zoomStandardAction->setShortcut(tr("Space"));
addAction(zoomStandardAction);
connect(zoomStandardAction, SIGNAL(triggered()), this, SLOT(zoomStandard()));
zoomMenu->addAction(zoomStandardAction);
menu->addMenu(zoomMenu);
//#endif
toggleColorToolAction = new QAction(tr("Adjust Contrast/Brightness"), this);
toggleColorToolAction->setShortcut(tr("O"));
toggleColorToolAction->setCheckable(true);
addAction(toggleColorToolAction);
connect(toggleColorToolAction, SIGNAL(triggered()), this, SLOT(toggleColorTool()));
menu->addAction(toggleColorToolAction);
// #ifdef Q_OS_MAC
// CHEN: 4.1.2015
// if(imageType =="fft")
// {
QMenu *brighterMenu = new QMenu("Quick-Adjust Brightness", this);
menu->addMenu(brighterMenu);
QAction *brighterAction = new QAction(tr("Brighter"), this);
brighterAction->setShortcut(tr("b"));
addAction(brighterAction);
connect(brighterAction, SIGNAL(triggered()), this, SLOT(brighter()));
brighterMenu->addAction(brighterAction);
QAction *darkerAction = new QAction(tr("Darker"), this);
darkerAction->setShortcut(tr("n"));
addAction(darkerAction);
connect(darkerAction, SIGNAL(triggered()), this, SLOT(darker()));
brighterMenu->addAction(darkerAction);
// }
// #endif
toggleMouseAssignAction = new QAction(tr("Show Mouse Button Assignment"), this);
toggleMouseAssignAction->setShortcut(tr("M"));
toggleMouseAssignAction->setCheckable(true);
addAction(toggleMouseAssignAction);
connect(toggleMouseAssignAction, SIGNAL(triggered()), this, SLOT(toggleAssignTool()));
menu->addAction(toggleMouseAssignAction);
QAction *screenshot = new QAction(tr("Screen Shot"), this);
screenshot->setShortcut(tr("G"));
addAction(screenshot);
connect(screenshot, SIGNAL(triggered()), image, SLOT(grabScreen()));
menu->addAction(screenshot);
int projectMode = projectData.projectMode().toInt();
if (imageType == "fft") {
viewDisplayParametersAction = new QAction(tr("Display Parameters"), this);
viewDisplayParametersAction->setShortcut(tr("D"));
viewDisplayParametersAction->setCheckable(true);
addAction(viewDisplayParametersAction);
connect(viewDisplayParametersAction, SIGNAL(triggered()), this, SLOT(toggleDisplayParameters()));
menu->addAction(viewDisplayParametersAction);
toggleCTFViewAction = new QAction(tr("View CTF"), this);
toggleCTFViewAction->setShortcut(tr("C"));
// toggleCTFViewAction->setShortcutContext(Qt::WidgetWithChildrenShortcut);
toggleCTFViewAction->setCheckable(true);
addAction(toggleCTFViewAction);
connect(toggleCTFViewAction, SIGNAL(triggered()), this, SLOT(toggleCTFView()));
//connect(toggleCTFViewAction,SIGNAL(triggered()),image,SLOT(toggleCTFView()));
menu->addAction(toggleCTFViewAction);
if (projectMode == 1) {
QAction *displayMillerIndicesAction = new QAction(tr("Show Miller Indices"), this);
displayMillerIndicesAction->setShortcut(tr("Shift+D"));
displayMillerIndicesAction->setCheckable(true);
addAction(displayMillerIndicesAction);
connect(displayMillerIndicesAction, SIGNAL(triggered()), signalMap, SLOT(map()));
signalMap->setMapping(displayMillerIndicesAction, "millerindices");
menu->addAction(displayMillerIndicesAction);
QAction *viewPSPeaksAction = new QAction(tr("View Peak List"), this);
viewPSPeaksAction->setShortcut(tr("Shift+P"));
viewPSPeaksAction->setCheckable(true);
addAction(viewPSPeaksAction);
connect(viewPSPeaksAction, SIGNAL(triggered()), signalMap, SLOT(map()));
signalMap->setMapping(viewPSPeaksAction, "pspeaklist");
connect(signalMap, SIGNAL(mapped(const QString &)), image, SLOT(toggleVisible(const QString &)));
menu->addAction(viewPSPeaksAction);
QAction *loadPSPeaksAction = new QAction(tr("Load Peak List"), this);
loadPSPeaksAction->setShortcut(tr("Shift+L"));
addAction(loadPSPeaksAction);
connect(loadPSPeaksAction, SIGNAL(triggered()), this, SLOT(selectPSList()));
menu->addAction(loadPSPeaksAction);
}
QMenu *spotSelection = new QMenu("Spot Selection");
if (projectMode == 1) menu->addMenu(spotSelection);
togglePeakListAction = new QAction(tr("Identify Spots"), spotSelection);
togglePeakListAction->setShortcut(tr("P"));
togglePeakListAction->setCheckable(true);
if (projectMode == 1) {
addAction(togglePeakListAction);
connect(togglePeakListAction, SIGNAL(triggered()), image, SLOT(togglePeakList()));
spotSelection->addAction(togglePeakListAction);
}
enterSpotSelectionModeAction = new QAction(tr("Enter Spot Selection Mode"), spotSelection);
enterSpotSelectionModeAction->setCheckable(true);
enterSpotSelectionModeAction->setShortcut(tr("Ctrl+P"));
if (projectMode == 1) {
addAction(enterSpotSelectionModeAction);
connect(enterSpotSelectionModeAction, SIGNAL(triggered()), this, SLOT(toggleSpotSelectMode()));
spotSelection->addAction(enterSpotSelectionModeAction);
}
savePeakListAction = new QAction(tr("Save Spot List"), spotSelection);
savePeakListAction->setShortcut(tr("Ctrl+Shift+S"));
if (projectMode == 1) {
addAction(savePeakListAction);
savePeakListAction->setDisabled(true);
connect(savePeakListAction, SIGNAL(triggered()), image, SLOT(savePeakList()));
spotSelection->addAction(savePeakListAction);
}
loadPeakListAction = new QAction(tr("Reload Spot List"), spotSelection);
loadPeakListAction->setShortcut(tr("Ctrl+R"));
if (projectMode == 1) {
addAction(loadPeakListAction);
loadPeakListAction->setDisabled(true);
connect(loadPeakListAction, SIGNAL(triggered()), image, SLOT(loadPeakList()));
connect(loadPeakListAction, SIGNAL(triggered()), image, SLOT(update()));
spotSelection->addAction(loadPeakListAction);
}
clearPeakListAction = new QAction(tr("Clear Spot List"), spotSelection);
clearPeakListAction->setShortcut(tr("Ctrl+Shift+C"));
if (projectMode == 1) {
addAction(clearPeakListAction);
clearPeakListAction->setDisabled(true);
connect(clearPeakListAction, SIGNAL(triggered()), image, SLOT(clearPeakList()));
spotSelection->addAction(clearPeakListAction);
}
QMenu *latticeRefinement = new QMenu("Lattice Refinement");
if (projectMode == 1) menu->addMenu(latticeRefinement);
toggleLatticeViewAction = new QAction(tr("View Lattice"), latticeRefinement);
toggleLatticeViewAction->setShortcut(tr("L"));
toggleLatticeViewAction->setCheckable(true);
if (projectMode == 1) {
addAction(toggleLatticeViewAction);
connect(toggleLatticeViewAction, SIGNAL(triggered()), image, SLOT(toggleLatticeView()));
latticeRefinement->addAction(toggleLatticeViewAction);
QAction *toggleSecondLatticeViewAction = new QAction(tr("View Second Lattice"), latticeRefinement);
toggleSecondLatticeViewAction->setShortcut(tr("S"));
toggleSecondLatticeViewAction->setCheckable(true);
addAction(toggleSecondLatticeViewAction);
connect(toggleSecondLatticeViewAction, SIGNAL(triggered()), image, SLOT(toggleSecondLatticeView()));
latticeRefinement->addAction(toggleSecondLatticeViewAction);
}
enterLatticeRefinementModeAction = new QAction(tr("Enter Lattice Refinement Mode"), latticeRefinement);
enterLatticeRefinementModeAction->setShortcut(tr("Shift+R"));
enterLatticeRefinementModeAction->setCheckable(true);
if (projectMode == 1) {
addAction(enterLatticeRefinementModeAction);
connect(enterLatticeRefinementModeAction, SIGNAL(triggered()), this, SLOT(toggleLatticeRefinementMode()));
latticeRefinement->addAction(enterLatticeRefinementModeAction);
}
addRefinementPointAction = new QAction(tr("Add Refinement Spot"), latticeRefinement);
addRefinementPointAction->setShortcuts(QList<QKeySequence>() << tr("Enter") << tr("Return"));
addRefinementPointAction->setEnabled(false);
if (projectMode == 1) {
addAction(addRefinementPointAction);
connect(addRefinementPointAction, SIGNAL(triggered()), latticeTool, SLOT(insertPoint()));
latticeRefinement->addAction(addRefinementPointAction);
}
} else {
toggleLatticeViewAction = new QAction(tr("View Lattice"), this);
toggleLatticeViewAction->setShortcut(tr("L"));
toggleLatticeViewAction->setCheckable(true);
if (projectMode == 1) {
addAction(toggleLatticeViewAction);
menu->addAction(toggleLatticeViewAction);
connect(toggleLatticeViewAction, SIGNAL(triggered()), signalMap, SLOT(map()));
signalMap->setMapping(toggleLatticeViewAction, "realLattice");
connect(signalMap, SIGNAL(mapped(const QString &)), image, SLOT(toggleVisible(const QString &)));
}
toggleParticlesViewAction = new QAction(tr("View Particles"), this);
toggleParticlesViewAction->setShortcut(tr("P"));
toggleParticlesViewAction->setCheckable(true);
if (projectMode == 2) {
addAction(toggleParticlesViewAction);
menu->addAction(toggleParticlesViewAction);
connect(toggleParticlesViewAction, SIGNAL(triggered()), image, SLOT(toggleParticleView()));
}
QMenu *fftSelectionMenu = new QMenu("Selection based FFT");
QAction *fftSelectionAction = new QAction(tr("FFT of Selection"), this);
fftSelectionMenu->addAction(fftSelectionAction);
fftSelectionAction->setShortcut(tr("Shift+F"));
fftSelectionAction->setCheckable(true);
addAction(fftSelectionAction);
connect(fftSelectionAction, SIGNAL(triggered()), this, SLOT(toggleFFTSelection()));
if (projectMode == 1) {
QAction *setReferenceOriginAction = new QAction(tr("Set Reference Origin"), this);
fftSelectionMenu->addAction(setReferenceOriginAction);
setReferenceOriginAction->setShortcut(tr("Shift+O"));
addAction(setReferenceOriginAction);
connect(setReferenceOriginAction, SIGNAL(triggered()), this, SLOT(setReferenceOrigin()));
connect(setReferenceOriginAction, SIGNAL(triggered()), spotSelect, SLOT(updateReferenceOrigin()));
}
menu->addMenu(fftSelectionMenu);
selectionMenu = new QMenu("Polygonal Selection");
if (projectMode == 1) {
QAction *selectionAreaAction = new QAction(tr("Polygonal Selection Masking"), this);
selectionMenu->addAction(selectionAreaAction);
selectionAreaAction->setShortcut(tr("Shift+S"));
selectionAreaAction->setCheckable(true);
addAction(selectionAreaAction);
connect(selectionAreaAction, SIGNAL(triggered()), this, SLOT(toggleCreatePathMode()));
QAction *saveSelectionArea = new QAction(tr("Save Selection"), this);
selectionMenu->addAction(saveSelectionArea);
saveSelectionArea->setShortcut(tr("Ctrl+Shift+S"));
addAction(saveSelectionArea);
connect(saveSelectionArea, SIGNAL(triggered()), image, SLOT(saveSelectionList()));
QAction *clearSelectionArea = new QAction(tr("Clear Selection"), this);
selectionMenu->addAction(clearSelectionArea);
clearSelectionArea->setShortcut(tr("Ctrl+Shift+C"));
addAction(clearSelectionArea);
connect(clearSelectionArea, SIGNAL(triggered()), image, SLOT(clearSelectionVertices()));
menu->addMenu(selectionMenu);
QMenu *referenceMenu = new QMenu("Unbending References", menu);
QAction *toggleBoxa1Action = new QAction(tr("View Boxa1"), this);
toggleBoxa1Action->setCheckable(true);
referenceMenu->addAction(toggleBoxa1Action);
addAction(toggleBoxa1Action);
connect(toggleBoxa1Action, SIGNAL(triggered()), this, SLOT(toggleBoxa1()));
QAction *toggleBoxa2Action = new QAction(tr("View Boxa2"), this);
toggleBoxa2Action->setCheckable(true);
referenceMenu->addAction(toggleBoxa2Action);
addAction(toggleBoxa2Action);
connect(toggleBoxa2Action, SIGNAL(triggered()), this, SLOT(toggleBoxa2()));
QAction *toggleBoxb1Action = new QAction(tr("View Boxb1"), this);
toggleBoxb1Action->setCheckable(true);
referenceMenu->addAction(toggleBoxb1Action);
addAction(toggleBoxb1Action);
connect(toggleBoxb1Action, SIGNAL(triggered()), this, SLOT(toggleBoxb1()));
QAction *toggleBoxb2Action = new QAction(tr("View Boxb2"), this);
toggleBoxb2Action->setCheckable(true);
referenceMenu->addAction(toggleBoxb2Action);
addAction(toggleBoxb2Action);
connect(toggleBoxb2Action, SIGNAL(triggered()), this, SLOT(toggleBoxb2()));
menu->addMenu(referenceMenu);
QAction *setPhaseOriginAction = new QAction(tr("Set Phase Origin"), this);
menu->addAction(setPhaseOriginAction);
setPhaseOriginAction->setShortcut(tr("Shift+P"));
addAction(setPhaseOriginAction);
connect(setPhaseOriginAction, SIGNAL(triggered()), this, SLOT(setPhaseOrigin()));
}
}
if (projectMode == 1) {
QAction *showTiltAxisAction = new QAction(tr("View Tilt Axis in Raw Image (TLTAXIS)"), this);
menu->addAction(showTiltAxisAction);
showTiltAxisAction->setCheckable(true);
showTiltAxisAction->setShortcut(tr("T"));
addAction(showTiltAxisAction);
connect(showTiltAxisAction, SIGNAL(triggered()), signalMap, SLOT(map()));
signalMap->setMapping(showTiltAxisAction, "tiltaxis");
connect(signalMap, SIGNAL(mapped(const QString &)), image, SLOT(toggleVisible(const QString &)));
QAction *showTaxisAction = new QAction(tr("View Tilt Axis in Final Map (TAXA)"), this);
menu->addAction(showTaxisAction);
showTaxisAction->setCheckable(true);
showTaxisAction->setShortcut(tr("Shift+T"));
addAction(showTaxisAction);
connect(showTaxisAction, SIGNAL(triggered()), signalMap, SLOT(map()));
signalMap->setMapping(showTaxisAction, "tiltaxa");
connect(signalMap, SIGNAL(mapped(const QString &)), image, SLOT(toggleVisible(const QString &)));
}
QAction *helpAction = new QAction(tr("Help"), this);
helpAction->setShortcut(tr("H"));
helpAction->setCheckable(true);
addAction(helpAction);
connect(helpAction, SIGNAL(triggered()), this, SLOT(toggleHelp()));
menu->addAction(helpAction);
closeAction = new QAction(tr("Close"), this);
closeAction->setShortcut(tr("Esc"));
addAction(closeAction);
connect(closeAction, SIGNAL(triggered()), this, SLOT(closeCurrent()));
menu->addAction(closeAction);
// menuBar->addMenu(menu);
}
Cost BL::calc(const int areaW)
{
vector<Id> ids = getImageIds();
sort(ids.begin(), ids.end(), DecreasingNormalWidthCmp(this));
typedef vector<S> V;
typedef V::iterator Itr;
V v;
v.push_back(S(Point(0, 0), 0, areaW));
list<Id> idsList(ids.begin(), ids.end());
while (!idsList.empty())
{
Itr insertItr = v.end();
int bestY = numeric_limits<int>::max();
//insertItr
list<Id>::iterator idsListBestItr = idsList.begin();
for (list<Id>::iterator idsListItr = idsList.begin(); idsListItr != idsList.end(); ++idsListItr)
{
const int w = normalWidth(*idsListItr);
bool wasBetter = false;
//cache friendly
for (Itr itr = v.begin(); itr != v.end(); ++itr)
{
if (itr->left + itr->right >= w && itr->point.y < bestY)
{
insertItr = itr;
bestY = itr->point.y;
wasBetter = true;
}
}
if (wasBetter)
idsListBestItr = idsListItr;
if (!morePrecisie)
break;
}
const Id item = *idsListBestItr;
idsList.erase(idsListBestItr);
//init
const int itemW = normalWidth(item);
const int itemH = normalHeight(item);
Point insertPoint(insertItr->point.x - insertItr->left, insertItr->point.y);
const int insertY1(insertPoint.y);
const int insertY2(insertY1 + itemH);
const int insertX1(insertPoint.x);
const int insertX2(insertX1 + itemW);
Itr firstCovered = v.begin();
Itr firstNotCovered = v.end();
S s1(Point(insertPoint.x, insertPoint.y + itemH), insertPoint.x, areaW - insertPoint.x);
S s2(Point(insertPoint.x + itemW, insertPoint.y + itemH), insertPoint.x + itemW, areaW - insertPoint.x - itemW);
S s3(Point(insertPoint.x + itemW, insertPoint.y), 0, areaW - insertPoint.x - itemW);
//firstCovered
firstCovered = insertItr;
for (Itr itr = v.begin(); itr != v.end(); ++itr)
{
if (insertX1 <= itr->point.x && itr->point.x <= insertX2 && itr->point.y <= insertY2)
{
firstCovered = itr;
break;
}
}
//firstNotCovered
for (Itr itr = v.begin(); itr != v.end(); ++itr)
{
if (insertX2 <= itr->point.x)
{
firstNotCovered = itr;
break;
}
}
//correct existing items
for (Itr itr = v.begin(); itr != v.end(); ++itr)
{
if (itr->point.y < insertY2)
{
if (itr->point.x <= insertX1)
{
int newRight = insertX1 - itr->point.x;
if (newRight < itr->right)
itr->right = newRight;
}
else if (insertX2 <= itr->point.x)
{
int newLeft = itr->point.x - insertX2;
if (newLeft < itr->left)
itr->left = newLeft;
}
}
}
//s1.left
for (Itr itr = firstCovered; ;)
{
if (itr->point.y > s1.point.y)
{
s1.left = s1.point.x - itr->point.x;
break;
}
if (itr == v.begin())
break;
--itr;
}
//s1.right
for (Itr itr = firstNotCovered; itr != v.end(); ++itr)
{
if (itr->point.y > s1.point.y)
{
s1.right = itr->point.x - s1.point.x;
break;
}
}
//s2.left
s2.left = s1.left + itemW;
//s2.right
s2.right = s1.right - itemW;
//s3.right
for (Itr itr = firstNotCovered; itr != v.end(); ++itr)
{
if (itr->point.y > s3.point.y)
{
s3.right = itr->point.x - s3.point.x;
break;
}
}
//insert item
result.add(item, normalPoint(insertPoint));
//reconstruction
V v2;
for (Itr itr = v.begin(); itr != firstCovered; ++itr)
v2.push_back(*itr);
v2.push_back(s1);
v2.push_back(s2);
v2.push_back(s3);
for (Itr itr = firstNotCovered; itr != v.end(); ++itr)
v2.push_back(*itr);
v = v2;
}
checkForCollisions();
return calcResultCost();
}
void MeshChunk::InsertWater(int x, int y, int z, float portionParType){
float portionOfBlockInTexture_Y = 0.f;
float portionOfBlockInTexture_Y_PLUSONE = portionParType;
// TOP
if(getVal(x,y+1,z) == 0){
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.0f, y+1.0f, z, 0.f, 1.f, 0.f);
insertPoint(0.f, portionOfBlockInTexture_Y_PLUSONE, x, y+1.0f, z, 0.f, 1.f, 0.f);
insertPoint(0.f, portionOfBlockInTexture_Y, x, y+1.0f, z+1.0f, 0.f, 1.f, 0.f);
insertPoint(0.f, portionOfBlockInTexture_Y, x, y+1.0f, z+1.0f, 0.f, 1.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.0f, 0.f, 1.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y+1.0f, z, 0.f, 1.f, 0.f);
}
// BOTTOM
if(getVal(x,y-1,z) == 0){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.0f, y, z+1.0f, 0.f, -1.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.0f, 0.f, -1.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y, z, 0.f, -1.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y, z, 0.f, -1.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y, x+1.f, y, z, 0.f, -1.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 0.f, -1.f, 0.f);
}
// LEFT
if(getVal(x-1,y,z) == 0){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, -1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y, x, y+1.f, z, -1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z, -1.f, 0.f, 0.f);
}
// RIGHT
if(getVal(x+1,y,z) == 0){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 1.f, 0.f, 0.f);
}
// BACK
if(getVal(x,y,z+1) == 0){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(1, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, 0.f, 0.f, 1.f);
}
// FRONT
if(getVal(x,y+1,z) == 0){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(1, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 0.f, 0.f, -1.f);
}
}
void MeshChunk::build(){
int m_width = 16;//land.getWidthMax();
int m_height = 128;//land.getHeightMax();
int m_deep = 16;//land.getDeepMax();
int nbTextureMax = 8; // nombre de type different max sur notre texture, a faire evoluer pour de la dynamique
float portionParType = 1.f/(float)nbTextureMax;
m_nVertexCount = 0;
for (int x = 0; x < m_width; ++x){
for (int y = 0; y < m_height; ++y){
for (int z = 0; z < m_deep; ++z){
if(getVal(x,y,z) > 0 && getVisible(x,y,z) > 0){
int typeOfBlock = getVal(x,y,z) - 1;
float portionOfBlockInTexture_Y = typeOfBlock*portionParType;
float portionOfBlockInTexture_Y_PLUSONE = portionOfBlockInTexture_Y+portionParType;
bool visibilityTop = checkFaceVisibility_top(x, y, z);
if(visibilityTop){
// TOP
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.0f, y+1.0f, z, 0.f, 1.f, 0.f);
insertPoint(0.f, portionOfBlockInTexture_Y_PLUSONE, x, y+1.0f, z, 0.f, 1.f, 0.f);
insertPoint(0.f, portionOfBlockInTexture_Y, x, y+1.0f, z+1.0f, 0.f, 1.f, 0.f);
insertPoint(0.f, portionOfBlockInTexture_Y, x, y+1.0f, z+1.0f, 0.f, 1.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.0f, 0.f, 1.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y+1.0f, z, 0.f, 1.f, 0.f);
}
if(checkFaceVisibility_bottom(x, y, z)){
// BOTTOM
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.0f, y, z+1.0f, 0.f, -1.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.0f, 0.f, -1.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y, z, 0.f, -1.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y, z, 0.f, -1.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y, x+1.f, y, z, 0.f, -1.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 0.f, -1.f, 0.f);
}
if(checkFaceVisibility_left(x, y, z)){
// LEFT
if(!visibilityTop && getVal(x,y,z) == 4){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, -1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y, x, y+1.f, z, -1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z, -1.f, 0.f, 0.f);
}else{
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z, -1.f, 0.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, -1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z, -1.f, 0.f, 0.f);
}
}
if(checkFaceVisibility_right(x, y, z)){
// RIGHT
if(!visibilityTop && getVal(x,y,z) == 4){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 1.f, 0.f, 0.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 1.f, 0.f, 0.f);
}else{
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 1.f, 0.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 1.f, 0.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 1.f, 0.f, 0.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 1.f, 0.f, 0.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 1.f, 0.f, 0.f);
}
}
if(checkFaceVisibility_back(x, y, z)){
// BACK
if(!visibilityTop && getVal(x,y,z) == 4){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(1, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, 0.f, 0.f, 1.f);
}else{
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z+1.f, 0.f, 0.f, 1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z+1.f, 0.f, 0.f, 1.f);
}
}
if(checkFaceVisibility_front(x, y, z)){
// FRONT
if(!visibilityTop && getVal(x,y,z) == 4){
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(1, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(1, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 0.f, 0.f, -1.f);
}else{
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 0.f, 0.f, -1.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y_PLUSONE, x, y, z, 0.f, 0.f, -1.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(division_1_sur_3, portionOfBlockInTexture_Y, x, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y, x+1.f, y+1.f, z, 0.f, 0.f, -1.f);
insertPoint(division_2_sur_3, portionOfBlockInTexture_Y_PLUSONE, x+1.f, y, z, 0.f, 0.f, -1.f);
}
}
}//else if(getVal(x,y,z) == 1){
// InsertWater(x, y, z, portionParType);
// }
}
}
}
m_pDataPointer = new ShapeVertex[m_nVertexCount];
for (int i = 0; i < m_nVertexCount; ++i){
m_pDataPointer[i] = temporaryVector.at(i);
}
temporaryVector.clear();
cubeDataVector.clear();
}
//! Inserts the min- and max points of the given box to this bounding box. This can result in that the box becomes larger.
force_inline void insertBox(const aabbox3d<T> &Other)
{
insertPoint(Other.Min);
insertPoint(Other.Max);
}
