Exemplo n.º 1
0
int main(int argc, char **argv)
{
  const char *label;
  unsigned pos;
  
  switch (argc)
  {
  case 1:
    label = "";
    break;
  case 2:
    if (is_help_option(argv[1]))
    {
      usage();
      return EXIT_SUCCESS;
    }
    else label = argv[1];
    break;
  default:
    usage();
    return EXIT_FAILURE;
  }

  for (pos = 0;;)
  {
    unsigned char buf[LINE];

    unsigned left = LINE - (pos % LINE);
    int res;
    
    /* Try reading the rest of the current line. */
    res = do_read(STDIN_FILENO, buf, left);
    if (!res)
      /* EOF */
      return EXIT_SUCCESS;

    else if (res < 0)
      {
	fprintf(stderr, "%s: read error: %s\n", label, strerror(errno));
	return EXIT_FAILURE;
      }

    /* Dump it */
    if (output_line(STDERR_FILENO, label, pos, buf, res) <= 0)
      {
	fprintf(stderr, "%s: write error on stderr: %s\n", label, strerror(errno));
	return EXIT_FAILURE;
      }
    
    /* And pass it on */
    if (do_write(STDOUT_FILENO, buf, res) < 0)
      {
	fprintf(stderr, "%s: write error: %s\n", label, strerror(errno));
	return EXIT_FAILURE;
      }

    pos += res;
  }
}
Exemplo n.º 2
0
void trace_enable_events(const char *line_buf)
{
    if (is_help_option(line_buf)) {
        trace_list_events();
        if (cur_mon == NULL) {
            exit(0);
        }
    } else {
        do_trace_enable_events(line_buf);
    }
}
Exemplo n.º 3
0
void configure_alarms(char const *opt)
{
    int i;
    int cur = 0;
    int count = ARRAY_SIZE(alarm_timers) - 1;
    char *arg;
    char *name;
    struct qemu_alarm_timer tmp;

    if (is_help_option(opt)) {
        show_available_alarms();
        exit(0);
    }

    arg = g_strdup(opt);

    /* Reorder the array */
    name = strtok(arg, ",");
    while (name) {
        for (i = 0; i < count && alarm_timers[i].name; i++) {
            if (!strcmp(alarm_timers[i].name, name))
                break;
        }

        if (i == count) {
            fprintf(stderr, "Unknown clock %s\n", name);
            goto next;
        }

        if (i < cur)
            /* Ignore */
            goto next;

	/* Swap */
        tmp = alarm_timers[i];
        alarm_timers[i] = alarm_timers[cur];
        alarm_timers[cur] = tmp;

        cur++;
next:
        name = strtok(NULL, ",");
    }

    g_free(arg);

    if (cur) {
        /* Disable remaining timers */
        for (i = cur; i < count; i++)
            alarm_timers[i].name = NULL;
    } else {
        show_available_alarms();
        exit(1);
    }
}
Exemplo n.º 4
0
void select_soundhw(const char *optarg)
{
    struct soundhw *c;

    if (is_help_option(optarg)) {
    show_valid_cards:

        if (soundhw_count) {
             printf("Valid sound card names (comma separated):\n");
             for (c = soundhw; c->name; ++c) {
                 printf ("%-11s %s\n", c->name, c->descr);
             }
             printf("\n-soundhw all will enable all of the above\n");
        } else {
             printf("Machine has no user-selectable audio hardware "
                    "(it may or may not have always-present audio hardware).\n");
        }
        exit(!is_help_option(optarg));
    }
    else {
        size_t l;
        const char *p;
        char *e;
        int bad_card = 0;

        if (!strcmp(optarg, "all")) {
            for (c = soundhw; c->name; ++c) {
                c->enabled = 1;
            }
            return;
        }

        p = optarg;
        while (*p) {
            e = strchr(p, ',');
            l = !e ? strlen(p) : (size_t) (e - p);

            for (c = soundhw; c->name; ++c) {
                if (!strncmp(c->name, p, l) && !c->name[l]) {
                    c->enabled = 1;
                    break;
                }
            }

            if (!c->name) {
                if (l > 80) {
                    error_report("Unknown sound card name (too big to show)");
                }
                else {
                    error_report("Unknown sound card name `%.*s'",
                                 (int) l, p);
                }
                bad_card = 1;
            }
            p += l + (e != NULL);
        }

        if (bad_card) {
            goto show_valid_cards;
        }
    }
}
Exemplo n.º 5
0
int main(int argc, char **argv)
{
    const char *sopt = "hVvdm:p:l:f:F::b:s:t:";
    const char *method = NULL, *path = NULL;
    const char *log_filepath = NULL;
    const char *pid_filepath;
#ifdef CONFIG_FSFREEZE
    const char *fsfreeze_hook = NULL;
#endif
    const char *state_dir;
#ifdef _WIN32
    const char *service = NULL;
#endif
    const struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "logfile", 1, NULL, 'l' },
        { "pidfile", 1, NULL, 'f' },
#ifdef CONFIG_FSFREEZE
        { "fsfreeze-hook", 2, NULL, 'F' },
#endif
        { "verbose", 0, NULL, 'v' },
        { "method", 1, NULL, 'm' },
        { "path", 1, NULL, 'p' },
        { "daemonize", 0, NULL, 'd' },
        { "blacklist", 1, NULL, 'b' },
#ifdef _WIN32
        { "service", 1, NULL, 's' },
#endif
        { "statedir", 1, NULL, 't' },
        { NULL, 0, NULL, 0 }
    };
    int opt_ind = 0, ch, daemonize = 0, i, j, len;
    GLogLevelFlags log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL;
    GList *blacklist = NULL;
    GAState *s;

    module_call_init(MODULE_INIT_QAPI);

    init_dfl_pathnames();
    pid_filepath = dfl_pathnames.pidfile;
    state_dir = dfl_pathnames.state_dir;

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 'm':
            method = optarg;
            break;
        case 'p':
            path = optarg;
            break;
        case 'l':
            log_filepath = optarg;
            break;
        case 'f':
            pid_filepath = optarg;
            break;
#ifdef CONFIG_FSFREEZE
        case 'F':
            fsfreeze_hook = optarg ? optarg : QGA_FSFREEZE_HOOK_DEFAULT;
            break;
#endif
        case 't':
             state_dir = optarg;
             break;
        case 'v':
            /* enable all log levels */
            log_level = G_LOG_LEVEL_MASK;
            break;
        case 'V':
            printf("QEMU Guest Agent %s\n", QEMU_VERSION);
            return 0;
        case 'd':
            daemonize = 1;
            break;
        case 'b': {
            if (is_help_option(optarg)) {
                qmp_for_each_command(ga_print_cmd, NULL);
                return 0;
            }
            for (j = 0, i = 0, len = strlen(optarg); i < len; i++) {
                if (optarg[i] == ',') {
                    optarg[i] = 0;
                    blacklist = g_list_append(blacklist, &optarg[j]);
                    j = i + 1;
                }
            }
            if (j < i) {
                blacklist = g_list_append(blacklist, &optarg[j]);
            }
            break;
        }
#ifdef _WIN32
        case 's':
            service = optarg;
            if (strcmp(service, "install") == 0) {
                const char *fixed_state_dir;

                /* If the user passed the "-t" option, we save that state dir
                 * in the service. Otherwise we let the service fetch the state
                 * dir from the environment when it starts.
                 */
                fixed_state_dir = (state_dir == dfl_pathnames.state_dir) ?
                                  NULL :
                                  state_dir;
                if (ga_install_vss_provider()) {
                    return EXIT_FAILURE;
                }
                if (ga_install_service(path, log_filepath, fixed_state_dir)) {
                    return EXIT_FAILURE;
                }
                return 0;
            } else if (strcmp(service, "uninstall") == 0) {
                ga_uninstall_vss_provider();
                return ga_uninstall_service();
            } else {
                printf("Unknown service command.\n");
                return EXIT_FAILURE;
            }
            break;
#endif
        case 'h':
            usage(argv[0]);
            return 0;
        case '?':
            g_print("Unknown option, try '%s --help' for more information.\n",
                    argv[0]);
            return EXIT_FAILURE;
        }
    }

#ifdef _WIN32
    /* On win32 the state directory is application specific (be it the default
     * or a user override). We got past the command line parsing; let's create
     * the directory (with any intermediate directories). If we run into an
     * error later on, we won't try to clean up the directory, it is considered
     * persistent.
     */
    if (g_mkdir_with_parents(state_dir, S_IRWXU) == -1) {
        g_critical("unable to create (an ancestor of) the state directory"
                   " '%s': %s", state_dir, strerror(errno));
        return EXIT_FAILURE;
    }
#endif

    s = g_malloc0(sizeof(GAState));
    s->log_level = log_level;
    s->log_file = stderr;
#ifdef CONFIG_FSFREEZE
    s->fsfreeze_hook = fsfreeze_hook;
#endif
    g_log_set_default_handler(ga_log, s);
    g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR);
    ga_enable_logging(s);
    s->state_filepath_isfrozen = g_strdup_printf("%s/qga.state.isfrozen",
                                                 state_dir);
    s->pstate_filepath = g_strdup_printf("%s/qga.state", state_dir);
    s->frozen = false;

#ifndef _WIN32
    /* check if a previous instance of qemu-ga exited with filesystems' state
     * marked as frozen. this could be a stale value (a non-qemu-ga process
     * or reboot may have since unfrozen them), but better to require an
     * uneeded unfreeze than to risk hanging on start-up
     */
    struct stat st;
    if (stat(s->state_filepath_isfrozen, &st) == -1) {
        /* it's okay if the file doesn't exist, but if we can't access for
         * some other reason, such as permissions, there's a configuration
         * that needs to be addressed. so just bail now before we get into
         * more trouble later
         */
        if (errno != ENOENT) {
            g_critical("unable to access state file at path %s: %s",
                       s->state_filepath_isfrozen, strerror(errno));
            return EXIT_FAILURE;
        }
    } else {
        g_warning("previous instance appears to have exited with frozen"
                  " filesystems. deferring logging/pidfile creation and"
                  " disabling non-fsfreeze-safe commands until"
                  " guest-fsfreeze-thaw is issued, or filesystems are"
                  " manually unfrozen and the file %s is removed",
                  s->state_filepath_isfrozen);
        s->frozen = true;
    }
#endif

    if (ga_is_frozen(s)) {
        if (daemonize) {
            /* delay opening/locking of pidfile till filesystems are unfrozen */
            s->deferred_options.pid_filepath = pid_filepath;
            become_daemon(NULL);
        }
        if (log_filepath) {
            /* delay opening the log file till filesystems are unfrozen */
            s->deferred_options.log_filepath = log_filepath;
        }
        ga_disable_logging(s);
        qmp_for_each_command(ga_disable_non_whitelisted, NULL);
    } else {
        if (daemonize) {
            become_daemon(pid_filepath);
        }
        if (log_filepath) {
            FILE *log_file = ga_open_logfile(log_filepath);
            if (!log_file) {
                g_critical("unable to open specified log file: %s",
                           strerror(errno));
                goto out_bad;
            }
            s->log_file = log_file;
        }
    }

    /* load persistent state from disk */
    if (!read_persistent_state(&s->pstate,
                               s->pstate_filepath,
                               ga_is_frozen(s))) {
        g_critical("failed to load persistent state");
        goto out_bad;
    }

    blacklist = ga_command_blacklist_init(blacklist);
    if (blacklist) {
        s->blacklist = blacklist;
        do {
            g_debug("disabling command: %s", (char *)blacklist->data);
            qmp_disable_command(blacklist->data);
            blacklist = g_list_next(blacklist);
        } while (blacklist);
    }
    s->command_state = ga_command_state_new();
    ga_command_state_init(s, s->command_state);
    ga_command_state_init_all(s->command_state);
    json_message_parser_init(&s->parser, process_event);
    ga_state = s;
#ifndef _WIN32
    if (!register_signal_handlers()) {
        g_critical("failed to register signal handlers");
        goto out_bad;
    }
#endif

    s->main_loop = g_main_loop_new(NULL, false);
    if (!channel_init(ga_state, method, path)) {
        g_critical("failed to initialize guest agent channel");
        goto out_bad;
    }
#ifndef _WIN32
    g_main_loop_run(ga_state->main_loop);
#else
    if (daemonize) {
        SERVICE_TABLE_ENTRY service_table[] = {
            { (char *)QGA_SERVICE_NAME, service_main }, { NULL, NULL } };
        StartServiceCtrlDispatcher(service_table);
    } else {
        g_main_loop_run(ga_state->main_loop);
    }
#endif

    ga_command_state_cleanup_all(ga_state->command_state);
    ga_channel_free(ga_state->channel);

    if (daemonize) {
        unlink(pid_filepath);
    }
    return 0;

out_bad:
    if (daemonize) {
        unlink(pid_filepath);
    }
    return EXIT_FAILURE;
}
Exemplo n.º 6
0
static void mips_jazz_init(MachineState *machine,
                           enum jazz_model_e jazz_model)
{
    MemoryRegion *address_space = get_system_memory();
    char *filename;
    int bios_size, n;
    MIPSCPU *cpu;
    CPUClass *cc;
    CPUMIPSState *env;
    qemu_irq *i8259;
    rc4030_dma *dmas;
    IOMMUMemoryRegion *rc4030_dma_mr;
    MemoryRegion *isa_mem = g_new(MemoryRegion, 1);
    MemoryRegion *isa_io = g_new(MemoryRegion, 1);
    MemoryRegion *rtc = g_new(MemoryRegion, 1);
    MemoryRegion *i8042 = g_new(MemoryRegion, 1);
    MemoryRegion *dma_dummy = g_new(MemoryRegion, 1);
    NICInfo *nd;
    DeviceState *dev, *rc4030;
    SysBusDevice *sysbus;
    ISABus *isa_bus;
    ISADevice *pit;
    DriveInfo *fds[MAX_FD];
    qemu_irq esp_reset, dma_enable;
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    MemoryRegion *bios = g_new(MemoryRegion, 1);
    MemoryRegion *bios2 = g_new(MemoryRegion, 1);

    /* init CPUs */
    cpu = MIPS_CPU(cpu_create(machine->cpu_type));
    env = &cpu->env;
    qemu_register_reset(main_cpu_reset, cpu);

    /* Chipset returns 0 in invalid reads and do not raise data exceptions.
     * However, we can't simply add a global memory region to catch
     * everything, as memory core directly call unassigned_mem_read/write
     * on some invalid accesses, which call do_unassigned_access on the
     * CPU, which raise an exception.
     * Handle that case by hijacking the do_unassigned_access method on
     * the CPU, and do not raise exceptions for data access. */
    cc = CPU_GET_CLASS(cpu);
    real_do_unassigned_access = cc->do_unassigned_access;
    cc->do_unassigned_access = mips_jazz_do_unassigned_access;

    /* allocate RAM */
    memory_region_allocate_system_memory(ram, NULL, "mips_jazz.ram",
                                         machine->ram_size);
    memory_region_add_subregion(address_space, 0, ram);

    memory_region_init_ram(bios, NULL, "mips_jazz.bios", MAGNUM_BIOS_SIZE,
                           &error_fatal);
    memory_region_set_readonly(bios, true);
    memory_region_init_alias(bios2, NULL, "mips_jazz.bios", bios,
                             0, MAGNUM_BIOS_SIZE);
    memory_region_add_subregion(address_space, 0x1fc00000LL, bios);
    memory_region_add_subregion(address_space, 0xfff00000LL, bios2);

    /* load the BIOS image. */
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    if (filename) {
        bios_size = load_image_targphys(filename, 0xfff00000LL,
                                        MAGNUM_BIOS_SIZE);
        g_free(filename);
    } else {
        bios_size = -1;
    }
    if ((bios_size < 0 || bios_size > MAGNUM_BIOS_SIZE) && !qtest_enabled()) {
        error_report("Could not load MIPS bios '%s'", bios_name);
        exit(1);
    }

    /* Init CPU internal devices */
    cpu_mips_irq_init_cpu(cpu);
    cpu_mips_clock_init(cpu);

    /* Chipset */
    rc4030 = rc4030_init(&dmas, &rc4030_dma_mr);
    sysbus = SYS_BUS_DEVICE(rc4030);
    sysbus_connect_irq(sysbus, 0, env->irq[6]);
    sysbus_connect_irq(sysbus, 1, env->irq[3]);
    memory_region_add_subregion(address_space, 0x80000000,
                                sysbus_mmio_get_region(sysbus, 0));
    memory_region_add_subregion(address_space, 0xf0000000,
                                sysbus_mmio_get_region(sysbus, 1));
    memory_region_init_io(dma_dummy, NULL, &dma_dummy_ops, NULL, "dummy_dma", 0x1000);
    memory_region_add_subregion(address_space, 0x8000d000, dma_dummy);

    /* ISA bus: IO space at 0x90000000, mem space at 0x91000000 */
    memory_region_init(isa_io, NULL, "isa-io", 0x00010000);
    memory_region_init(isa_mem, NULL, "isa-mem", 0x01000000);
    memory_region_add_subregion(address_space, 0x90000000, isa_io);
    memory_region_add_subregion(address_space, 0x91000000, isa_mem);
    isa_bus = isa_bus_new(NULL, isa_mem, isa_io, &error_abort);

    /* ISA devices */
    i8259 = i8259_init(isa_bus, env->irq[4]);
    isa_bus_irqs(isa_bus, i8259);
    DMA_init(isa_bus, 0);
    pit = pit_init(isa_bus, 0x40, 0, NULL);
    pcspk_init(isa_bus, pit);

    /* Video card */
    switch (jazz_model) {
    case JAZZ_MAGNUM:
        dev = qdev_create(NULL, "sysbus-g364");
        qdev_init_nofail(dev);
        sysbus = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(sysbus, 0, 0x60080000);
        sysbus_mmio_map(sysbus, 1, 0x40000000);
        sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 3));
        {
            /* Simple ROM, so user doesn't have to provide one */
            MemoryRegion *rom_mr = g_new(MemoryRegion, 1);
            memory_region_init_ram(rom_mr, NULL, "g364fb.rom", 0x80000,
                                   &error_fatal);
            memory_region_set_readonly(rom_mr, true);
            uint8_t *rom = memory_region_get_ram_ptr(rom_mr);
            memory_region_add_subregion(address_space, 0x60000000, rom_mr);
            rom[0] = 0x10; /* Mips G364 */
        }
        break;
    case JAZZ_PICA61:
        isa_vga_mm_init(0x40000000, 0x60000000, 0, get_system_memory());
        break;
    default:
        break;
    }

    /* Network controller */
    for (n = 0; n < nb_nics; n++) {
        nd = &nd_table[n];
        if (!nd->model)
            nd->model = g_strdup("dp83932");
        if (strcmp(nd->model, "dp83932") == 0) {
            qemu_check_nic_model(nd, "dp83932");

            dev = qdev_create(NULL, "dp8393x");
            qdev_set_nic_properties(dev, nd);
            qdev_prop_set_uint8(dev, "it_shift", 2);
            qdev_prop_set_ptr(dev, "dma_mr", rc4030_dma_mr);
            qdev_init_nofail(dev);
            sysbus = SYS_BUS_DEVICE(dev);
            sysbus_mmio_map(sysbus, 0, 0x80001000);
            sysbus_mmio_map(sysbus, 1, 0x8000b000);
            sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
            break;
        } else if (is_help_option(nd->model)) {
            fprintf(stderr, "qemu: Supported NICs: dp83932\n");
            exit(1);
        } else {
            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
            exit(1);
        }
    }

    /* SCSI adapter */
    esp_init(0x80002000, 0,
             rc4030_dma_read, rc4030_dma_write, dmas[0],
             qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);

    /* Floppy */
    for (n = 0; n < MAX_FD; n++) {
        fds[n] = drive_get(IF_FLOPPY, 0, n);
    }
    /* FIXME: we should enable DMA with a custom IsaDma device */
    fdctrl_init_sysbus(qdev_get_gpio_in(rc4030, 1), -1, 0x80003000, fds);

    /* Real time clock */
    rtc_init(isa_bus, 1980, NULL);
    memory_region_init_io(rtc, NULL, &rtc_ops, NULL, "rtc", 0x1000);
    memory_region_add_subregion(address_space, 0x80004000, rtc);

    /* Keyboard (i8042) */
    i8042_mm_init(qdev_get_gpio_in(rc4030, 6), qdev_get_gpio_in(rc4030, 7),
                  i8042, 0x1000, 0x1);
    memory_region_add_subregion(address_space, 0x80005000, i8042);

    /* Serial ports */
    if (serial_hds[0]) {
        serial_mm_init(address_space, 0x80006000, 0,
                       qdev_get_gpio_in(rc4030, 8), 8000000/16,
                       serial_hds[0], DEVICE_NATIVE_ENDIAN);
    }
    if (serial_hds[1]) {
        serial_mm_init(address_space, 0x80007000, 0,
                       qdev_get_gpio_in(rc4030, 9), 8000000/16,
                       serial_hds[1], DEVICE_NATIVE_ENDIAN);
    }

    /* Parallel port */
    if (parallel_hds[0])
        parallel_mm_init(address_space, 0x80008000, 0,
                         qdev_get_gpio_in(rc4030, 0), parallel_hds[0]);

    /* FIXME: missing Jazz sound at 0x8000c000, rc4030[2] */

    /* NVRAM */
    dev = qdev_create(NULL, "ds1225y");
    qdev_init_nofail(dev);
    sysbus = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(sysbus, 0, 0x80009000);

    /* LED indicator */
    sysbus_create_simple("jazz-led", 0x8000f000, NULL);
}
Exemplo n.º 7
0
int main(int argc, char **argv)
{
    const char *sopt = "hVvdm:p:l:f:b:s:t:";
    const char *method = NULL, *path = NULL;
    const char *log_filepath = NULL;
    const char *pid_filepath = QGA_PIDFILE_DEFAULT;
    const char *state_dir = QGA_STATEDIR_DEFAULT;
#ifdef _WIN32
    const char *service = NULL;
#endif
    const struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "logfile", 1, NULL, 'l' },
        { "pidfile", 1, NULL, 'f' },
        { "verbose", 0, NULL, 'v' },
        { "method", 1, NULL, 'm' },
        { "path", 1, NULL, 'p' },
        { "daemonize", 0, NULL, 'd' },
        { "blacklist", 1, NULL, 'b' },
#ifdef _WIN32
        { "service", 1, NULL, 's' },
#endif
        { "statedir", 1, NULL, 't' },
        { NULL, 0, NULL, 0 }
    };
    int opt_ind = 0, ch, daemonize = 0, i, j, len;
    GLogLevelFlags log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL;
    GList *blacklist = NULL;
    GAState *s;

    module_call_init(MODULE_INIT_QAPI);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 'm':
            method = optarg;
            break;
        case 'p':
            path = optarg;
            break;
        case 'l':
            log_filepath = optarg;
            break;
        case 'f':
            pid_filepath = optarg;
            break;
        case 't':
             state_dir = optarg;
             break;
        case 'v':
            /* enable all log levels */
            log_level = G_LOG_LEVEL_MASK;
            break;
        case 'V':
            printf("QEMU Guest Agent %s\n", QEMU_VERSION);
            return 0;
        case 'd':
            daemonize = 1;
            break;
        case 'b': {
            char **list_head, **list;
            if (is_help_option(optarg)) {
                list_head = list = qmp_get_command_list();
                while (*list != NULL) {
                    printf("%s\n", *list);
                    g_free(*list);
                    list++;
                }
                g_free(list_head);
                return 0;
            }
            for (j = 0, i = 0, len = strlen(optarg); i < len; i++) {
                if (optarg[i] == ',') {
                    optarg[i] = 0;
                    blacklist = g_list_append(blacklist, &optarg[j]);
                    j = i + 1;
                }
            }
            if (j < i) {
                blacklist = g_list_append(blacklist, &optarg[j]);
            }
            break;
        }
#ifdef _WIN32
        case 's':
            service = optarg;
            if (strcmp(service, "install") == 0) {
                return ga_install_service(path, log_filepath);
            } else if (strcmp(service, "uninstall") == 0) {
                return ga_uninstall_service();
            } else {
                printf("Unknown service command.\n");
                return EXIT_FAILURE;
            }
            break;
#endif
        case 'h':
            usage(argv[0]);
            return 0;
        case '?':
            g_print("Unknown option, try '%s --help' for more information.\n",
                    argv[0]);
            return EXIT_FAILURE;
        }
    }

    s = g_malloc0(sizeof(GAState));
    s->log_level = log_level;
    s->log_file = stderr;
    g_log_set_default_handler(ga_log, s);
    g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR);
    ga_enable_logging(s);
    s->state_filepath_isfrozen = g_strdup_printf("%s/qga.state.isfrozen",
                                                 state_dir);
    s->frozen = false;
#ifndef _WIN32
    /* check if a previous instance of qemu-ga exited with filesystems' state
     * marked as frozen. this could be a stale value (a non-qemu-ga process
     * or reboot may have since unfrozen them), but better to require an
     * uneeded unfreeze than to risk hanging on start-up
     */
    struct stat st;
    if (stat(s->state_filepath_isfrozen, &st) == -1) {
        /* it's okay if the file doesn't exist, but if we can't access for
         * some other reason, such as permissions, there's a configuration
         * that needs to be addressed. so just bail now before we get into
         * more trouble later
         */
        if (errno != ENOENT) {
            g_critical("unable to access state file at path %s: %s",
                       s->state_filepath_isfrozen, strerror(errno));
            return EXIT_FAILURE;
        }
    } else {
        g_warning("previous instance appears to have exited with frozen"
                  " filesystems. deferring logging/pidfile creation and"
                  " disabling non-fsfreeze-safe commands until"
                  " guest-fsfreeze-thaw is issued, or filesystems are"
                  " manually unfrozen and the file %s is removed",
                  s->state_filepath_isfrozen);
        s->frozen = true;
    }
#endif

    if (ga_is_frozen(s)) {
        if (daemonize) {
            /* delay opening/locking of pidfile till filesystem are unfrozen */
            s->deferred_options.pid_filepath = pid_filepath;
            become_daemon(NULL);
        }
        if (log_filepath) {
            /* delay opening the log file till filesystems are unfrozen */
            s->deferred_options.log_filepath = log_filepath;
        }
        ga_disable_logging(s);
        ga_disable_non_whitelisted();
    } else {
        if (daemonize) {
            become_daemon(pid_filepath);
        }
        if (log_filepath) {
            FILE *log_file = fopen(log_filepath, "a");
            if (!log_file) {
                g_critical("unable to open specified log file: %s",
                           strerror(errno));
                goto out_bad;
            }
            s->log_file = log_file;
        }
    }

    if (blacklist) {
        s->blacklist = blacklist;
        do {
            g_debug("disabling command: %s", (char *)blacklist->data);
            qmp_disable_command(blacklist->data);
            blacklist = g_list_next(blacklist);
        } while (blacklist);
    }
    s->command_state = ga_command_state_new();
    ga_command_state_init(s, s->command_state);
    ga_command_state_init_all(s->command_state);
    json_message_parser_init(&s->parser, process_event);
    ga_state = s;
#ifndef _WIN32
    if (!register_signal_handlers()) {
        g_critical("failed to register signal handlers");
        goto out_bad;
    }
#endif

    s->main_loop = g_main_loop_new(NULL, false);
    if (!channel_init(ga_state, method, path)) {
        g_critical("failed to initialize guest agent channel");
        goto out_bad;
    }
#ifndef _WIN32
    g_main_loop_run(ga_state->main_loop);
#else
    if (daemonize) {
        SERVICE_TABLE_ENTRY service_table[] = {
            { (char *)QGA_SERVICE_NAME, service_main }, { NULL, NULL } };
        StartServiceCtrlDispatcher(service_table);
    } else {
        g_main_loop_run(ga_state->main_loop);
    }
#endif

    ga_command_state_cleanup_all(ga_state->command_state);
    ga_channel_free(ga_state->channel);

    if (daemonize) {
        unlink(pid_filepath);
    }
    return 0;

out_bad:
    if (daemonize) {
        unlink(pid_filepath);
    }
    return EXIT_FAILURE;
}
Exemplo n.º 8
0
static void mips_jazz_init(MemoryRegion *address_space,
                           MemoryRegion *address_space_io,
                           ram_addr_t ram_size,
                           const char *cpu_model,
                           enum jazz_model_e jazz_model)
{
    char *filename;
    int bios_size, n;
    MIPSCPU *cpu;
    CPUMIPSState *env;
    qemu_irq *rc4030, *i8259;
    rc4030_dma *dmas;
    void* rc4030_opaque;
    MemoryRegion *rtc = g_new(MemoryRegion, 1);
    MemoryRegion *i8042 = g_new(MemoryRegion, 1);
    MemoryRegion *dma_dummy = g_new(MemoryRegion, 1);
    NICInfo *nd;
    DeviceState *dev;
    SysBusDevice *sysbus;
    ISABus *isa_bus;
    ISADevice *pit;
    DriveInfo *fds[MAX_FD];
    qemu_irq esp_reset, dma_enable;
    qemu_irq *cpu_exit_irq;
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    MemoryRegion *bios = g_new(MemoryRegion, 1);
    MemoryRegion *bios2 = g_new(MemoryRegion, 1);

    /* init CPUs */
    if (cpu_model == NULL) {
#ifdef TARGET_MIPS64
        cpu_model = "R4000";
#else
        /* FIXME: All wrong, this maybe should be R3000 for the older JAZZs. */
        cpu_model = "24Kf";
#endif
    }
    cpu = cpu_mips_init(cpu_model);
    if (cpu == NULL) {
        fprintf(stderr, "Unable to find CPU definition\n");
        exit(1);
    }
    env = &cpu->env;
    qemu_register_reset(main_cpu_reset, cpu);

    /* allocate RAM */
    memory_region_init_ram(ram, NULL, "mips_jazz.ram", ram_size);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space, 0, ram);

    memory_region_init_ram(bios, NULL, "mips_jazz.bios", MAGNUM_BIOS_SIZE);
    vmstate_register_ram_global(bios);
    memory_region_set_readonly(bios, true);
    memory_region_init_alias(bios2, NULL, "mips_jazz.bios", bios,
                             0, MAGNUM_BIOS_SIZE);
    memory_region_add_subregion(address_space, 0x1fc00000LL, bios);
    memory_region_add_subregion(address_space, 0xfff00000LL, bios2);

    /* load the BIOS image. */
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    if (filename) {
        bios_size = load_image_targphys(filename, 0xfff00000LL,
                                        MAGNUM_BIOS_SIZE);
        g_free(filename);
    } else {
        bios_size = -1;
    }
    if (bios_size < 0 || bios_size > MAGNUM_BIOS_SIZE) {
        fprintf(stderr, "qemu: Could not load MIPS bios '%s'\n",
                bios_name);
        exit(1);
    }

    /* Init CPU internal devices */
    cpu_mips_irq_init_cpu(env);
    cpu_mips_clock_init(env);

    /* Chipset */
    rc4030_opaque = rc4030_init(env->irq[6], env->irq[3], &rc4030, &dmas,
                                address_space);
    memory_region_init_io(dma_dummy, NULL, &dma_dummy_ops, NULL, "dummy_dma", 0x1000);
    memory_region_add_subregion(address_space, 0x8000d000, dma_dummy);

    /* ISA devices */
    isa_bus = isa_bus_new(NULL, address_space_io);
    i8259 = i8259_init(isa_bus, env->irq[4]);
    isa_bus_irqs(isa_bus, i8259);
    cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
    DMA_init(0, cpu_exit_irq);
    pit = pit_init(isa_bus, 0x40, 0, NULL);
    pcspk_init(isa_bus, pit);

    /* ISA IO space at 0x90000000 */
    isa_mmio_init(0x90000000, 0x01000000);
    isa_mem_base = 0x11000000;

    /* Video card */
    switch (jazz_model) {
    case JAZZ_MAGNUM:
        dev = qdev_create(NULL, "sysbus-g364");
        qdev_init_nofail(dev);
        sysbus = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(sysbus, 0, 0x60080000);
        sysbus_mmio_map(sysbus, 1, 0x40000000);
        sysbus_connect_irq(sysbus, 0, rc4030[3]);
        {
            /* Simple ROM, so user doesn't have to provide one */
            MemoryRegion *rom_mr = g_new(MemoryRegion, 1);
            memory_region_init_ram(rom_mr, NULL, "g364fb.rom", 0x80000);
            vmstate_register_ram_global(rom_mr);
            memory_region_set_readonly(rom_mr, true);
            uint8_t *rom = memory_region_get_ram_ptr(rom_mr);
            memory_region_add_subregion(address_space, 0x60000000, rom_mr);
            rom[0] = 0x10; /* Mips G364 */
        }
        break;
    case JAZZ_PICA61:
        isa_vga_mm_init(0x40000000, 0x60000000, 0, get_system_memory());
        break;
    default:
        break;
    }

    /* Network controller */
    for (n = 0; n < nb_nics; n++) {
        nd = &nd_table[n];
        if (!nd->model)
            nd->model = g_strdup("dp83932");
        if (strcmp(nd->model, "dp83932") == 0) {
            dp83932_init(nd, 0x80001000, 2, get_system_memory(), rc4030[4],
                         rc4030_opaque, rc4030_dma_memory_rw);
            break;
        } else if (is_help_option(nd->model)) {
            fprintf(stderr, "qemu: Supported NICs: dp83932\n");
            exit(1);
        } else {
            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
            exit(1);
        }
    }

    /* SCSI adapter */
    esp_init(0x80002000, 0,
             rc4030_dma_read, rc4030_dma_write, dmas[0],
             rc4030[5], &esp_reset, &dma_enable);

    /* Floppy */
    if (drive_get_max_bus(IF_FLOPPY) >= MAX_FD) {
        fprintf(stderr, "qemu: too many floppy drives\n");
        exit(1);
    }
    for (n = 0; n < MAX_FD; n++) {
        fds[n] = drive_get(IF_FLOPPY, 0, n);
    }
    fdctrl_init_sysbus(rc4030[1], 0, 0x80003000, fds);

    /* Real time clock */
    rtc_init(isa_bus, 1980, NULL);
    memory_region_init_io(rtc, NULL, &rtc_ops, NULL, "rtc", 0x1000);
    memory_region_add_subregion(address_space, 0x80004000, rtc);

    /* Keyboard (i8042) */
    i8042_mm_init(rc4030[6], rc4030[7], i8042, 0x1000, 0x1);
    memory_region_add_subregion(address_space, 0x80005000, i8042);

    /* Serial ports */
    if (serial_hds[0]) {
        serial_mm_init(address_space, 0x80006000, 0, rc4030[8], 8000000/16,
                       serial_hds[0], DEVICE_NATIVE_ENDIAN);
    }
    if (serial_hds[1]) {
        serial_mm_init(address_space, 0x80007000, 0, rc4030[9], 8000000/16,
                       serial_hds[1], DEVICE_NATIVE_ENDIAN);
    }

    /* Parallel port */
    if (parallel_hds[0])
        parallel_mm_init(address_space, 0x80008000, 0, rc4030[0],
                         parallel_hds[0]);

    /* FIXME: missing Jazz sound at 0x8000c000, rc4030[2] */

    /* NVRAM */
    dev = qdev_create(NULL, "ds1225y");
    qdev_init_nofail(dev);
    sysbus = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(sysbus, 0, 0x80009000);

    /* LED indicator */
    sysbus_create_simple("jazz-led", 0x8000f000, NULL);
}