static GtkFileChooserConfirmation
confirm_overwrite_callback (GtkFileChooser *dialog,
gpointer data)
{
gchar *uri;
GFile *file;
GtkFileChooserConfirmation res;
cedit_debug (DEBUG_COMMANDS);
uri = gtk_file_chooser_get_uri (dialog);
file = g_file_new_for_uri (uri);
g_free (uri);
if (is_read_only (file))
{
if (replace_read_only_file (GTK_WINDOW (dialog), file))
res = GTK_FILE_CHOOSER_CONFIRMATION_ACCEPT_FILENAME;
else
res = GTK_FILE_CHOOSER_CONFIRMATION_SELECT_AGAIN;
}
else
{
/* fall back to the default confirmation dialog */
res = GTK_FILE_CHOOSER_CONFIRMATION_CONFIRM;
}
g_object_unref (file);
return res;
}
static int do_remount_sb(struct super_block *sb, int flags, char *data)
{
int retval;
struct vfsmount *vfsmnt;
/*
* Invalidate the inodes, as some mount options may be changed.
* N.B. If we are changing media, we should check the return
* from invalidate_inodes ... can't allow _any_ open files.
*/
invalidate_inodes(sb);
if (!(flags & MS_RDONLY) && sb->s_dev && is_read_only(sb->s_dev))
return -EACCES;
/*flags |= MS_RDONLY;*/
/* If we are remounting RDONLY, make sure there are no rw files open */
if ((flags & MS_RDONLY) && !(sb->s_flags & MS_RDONLY))
if (!fs_may_remount_ro(sb))
return -EBUSY;
if (sb->s_op && sb->s_op->remount_fs) {
retval = sb->s_op->remount_fs(sb, &flags, data);
if (retval)
return retval;
}
sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
vfsmnt = lookup_vfsmnt(sb->s_dev);
if (vfsmnt)
vfsmnt->mnt_flags = sb->s_flags;
return 0;
}
int GridFTPModule::close(gfal_file_handle handle)
{
GridFTPFileDesc* desc = static_cast<GridFTPFileDesc*>(gfal_file_handle_get_fdesc(handle));
if (desc) {
gridftp_rw_commit_put(GFAL_GRIDFTP_SCOPE_CLOSE, desc);
if (is_write_only(desc->open_flags)) {
desc->request->wait(GFAL_GRIDFTP_SCOPE_CLOSE);
}
else if (is_read_only(desc->open_flags)) {
if (!desc->request->done)
globus_ftp_client_abort(desc->handler->get_ftp_client_handle());
try {
desc->request->wait(GFAL_GRIDFTP_SCOPE_CLOSE);
}
catch (const Gfal::CoreException& e) {
if (e.code() != ECANCELED)
throw;
}
}
gfal_file_handle_delete(handle);
delete desc;
}
return 0;
}
int block_write(struct inode * inode, struct file * filp,
const char * buf, int count)
{
int blocksize, blocksize_bits, i, buffercount,write_error;
int block, blocks;
loff_t offset;
int chars;
int written = 0, retval = 0;
struct buffer_head * bhlist[NBUF];
unsigned int size;
kdev_t dev;
struct buffer_head * bh, *bufferlist[NBUF];
register char * p;
write_error = buffercount = 0;
dev = inode->i_rdev;
if ( is_read_only( inode->i_rdev ))
return -EPERM;
blocksize = BLOCK_SIZE;
if (blksize_size[MAJOR(dev)] && blksize_size[MAJOR(dev)][MINOR(dev)])
blocksize = blksize_size[MAJOR(dev)][MINOR(dev)];
i = blocksize;
blocksize_bits = 0;
while(i != 1) {
blocksize_bits++;
i >>= 1;
}
block = filp->f_pos >> blocksize_bits;
offset = filp->f_pos & (blocksize-1);
if (blk_size[MAJOR(dev)])
size = ((loff_t) blk_size[MAJOR(dev)][MINOR(dev)] << BLOCK_SIZE_BITS) >> blocksize_bits;
else
/**
* @brief Finishes moving a pattern.
*/
void TilesetView::end_state_moving_pattern() {
QRect box = current_area_item->rect().toRect();
if (!box.isEmpty() &&
sceneRect().contains(box) &&
get_items_intersecting_current_area().isEmpty() &&
model->get_selection_count() == 1 &&
!is_read_only() &&
dragging_current_point != dragging_start_point) {
// Context menu to move the pattern.
QMenu menu;
QAction* move_pattern_action = new QAction(tr("Move here"), this);
connect(move_pattern_action, &QAction::triggered, [=] {
emit change_selected_pattern_position_requested(box.topLeft());
});
menu.addAction(move_pattern_action);
menu.addSeparator();
menu.addAction(tr("Cancel"));
menu.exec(cursor().pos() + QPoint(1, 1));
}
scene->removeItem(current_area_item);
delete current_area_item;
current_area_item = nullptr;
start_state_normal();
}
void SystemProperties::ReadCallback(const prop_info* pi,
void (*callback)(void* cookie, const char* name,
const char* value, uint32_t serial),
void* cookie) {
// Read only properties don't need to copy the value to a temporary buffer, since it can never
// change.
if (is_read_only(pi->name)) {
uint32_t serial = Serial(pi);
if (pi->is_long()) {
callback(cookie, pi->name, pi->long_value(), serial);
} else {
callback(cookie, pi->name, pi->value, serial);
}
return;
}
while (true) {
uint32_t serial = Serial(pi); // acquire semantics
size_t len = SERIAL_VALUE_LEN(serial);
char value_buf[len + 1];
memcpy(value_buf, pi->value, len);
value_buf[len] = '\0';
// TODO: see todo in Read function
atomic_thread_fence(memory_order_acquire);
if (serial == load_const_atomic(&(pi->serial), memory_order_relaxed)) {
callback(cookie, pi->name, value_buf, serial);
return;
}
}
}
int orig_do_mount(kdev_t dev, const char * dev_name, const char * dir_name, const char * type, int flags, void * data) {
#endif
struct dentry * dir_d;
struct super_block * sb;
struct vfsmount *vfsmnt;
int error;
error = -EACCES;
if (!(flags & MS_RDONLY) && dev && is_read_only(dev))
goto out;
/*
* Do the lookup first to force automounting.
*/
dir_d = namei(dir_name);
error = PTR_ERR(dir_d);
if (IS_ERR(dir_d))
goto out;
down(&mount_sem);
error = -ENOTDIR;
if (!S_ISDIR(dir_d->d_inode->i_mode))
goto dput_and_out;
error = -EBUSY;
if (dir_d->d_covers != dir_d)
goto dput_and_out;
/*
* Note: If the superblock already exists,
* read_super just does a get_super().
*/
error = -EINVAL;
sb = read_super(dev, type, flags, data, 0);
if (!sb)
goto dput_and_out;
/*
* We may have slept while reading the super block,
* so we check afterwards whether it's safe to mount.
*/
error = -EBUSY;
if (!fs_may_mount(dev))
goto dput_and_out;
error = -ENOMEM;
vfsmnt = add_vfsmnt(sb, dev_name, dir_name);
if (vfsmnt) {
d_mount(dget(dir_d), sb->s_root);
error = 0;
}
dput_and_out:
dput(dir_d);
up(&mount_sem);
out:
return error;
}
int env_remove(const wcstring &key, int var_mode)
{
ASSERT_IS_MAIN_THREAD();
env_node_t *first_node;
int erased = 0;
if ((var_mode & ENV_USER) && is_read_only(key))
{
return 2;
}
first_node = top;
if (!(var_mode & ENV_UNIVERSAL))
{
if (var_mode & ENV_GLOBAL)
{
first_node = global_env;
}
if (try_remove(first_node, key.c_str(), var_mode))
{
event_t ev = event_t::variable_event(key);
ev.arguments.push_back(L"VARIABLE");
ev.arguments.push_back(L"ERASE");
ev.arguments.push_back(key);
event_fire(&ev);
erased = 1;
}
}
if (!erased &&
!(var_mode & ENV_GLOBAL) &&
!(var_mode & ENV_LOCAL))
{
bool is_exported = uvars()->get_export(key);
erased = uvars() && uvars()->remove(key);
if (erased)
{
env_universal_barrier();
event_t ev = event_t::variable_event(key);
ev.arguments.push_back(L"VARIABLE");
ev.arguments.push_back(L"ERASE");
ev.arguments.push_back(key);
event_fire(&ev);
}
if (is_exported)
mark_changed_exported();
}
react_to_variable_change(key);
return !erased;
}
// gridFTP open is restricted by the protocol : READ or Write but not both
//
gfal_file_handle GridFTPModule::open(const char* url, int flag, mode_t mode)
{
GridFTPSessionHandler *handler = new GridFTPSessionHandler(_handle_factory, url);
GridFTPStreamState* stream = new GridFTPStreamState(handler);
GridFTPRequestState* request = new GridFTPRequestState(handler);
std::auto_ptr<GridFTPFileDesc> desc(new GridFTPFileDesc(handler, request, stream, url, flag));
gfal_log(GFAL_VERBOSE_TRACE, " -> [GridFTPModule::open] ");
globus_result_t res;
// check ENOENT condition for R_ONLY
if (is_read_only(desc->open_flags) && this->exists(url) == false) {
char err_buff[2048];
snprintf(err_buff, 2048, " gridftp open error : %s on url %s", strerror(ENOENT), url);
throw Gfal::CoreException(GFAL_GRIDFTP_SCOPE_OPEN, err_buff, ENOENT);
}
if (is_read_only(desc->open_flags)) {
gfal_log(GFAL_VERBOSE_TRACE, " -> initialize FTP GET global operations... ");
res = globus_ftp_client_get(
desc->stream->handler->get_ftp_client_handle(), url,
desc->stream->handler->get_ftp_client_operationattr(),
NULL, globus_ftp_client_done_callback, desc->request);
gfal_globus_check_result(GFAL_GRIDFTP_SCOPE_OPEN, res);
}
else if (is_write_only(desc->open_flags)) {
gfal_log(GFAL_VERBOSE_TRACE,
" -> initialize FTP PUT global operations ... ");
res = globus_ftp_client_put(
desc->stream->handler->get_ftp_client_handle(), url,
desc->stream->handler->get_ftp_client_operationattr(),
NULL, globus_ftp_client_done_callback, desc->request);
gfal_globus_check_result(GFAL_GRIDFTP_SCOPE_OPEN, res);
}
else {
gfal_log(GFAL_VERBOSE_TRACE,
" -> no operation initialization, switch to partial read/write mode...");
desc->reset();
}
gfal_log(GFAL_VERBOSE_TRACE, " <- [GridFTPModule::open] ");
return gfal_file_handle_new2(gridftp_plugin_name(), (gpointer) desc.release(), NULL, url);
}
int dogetopt(int minor, struct psdev_opt *opt)
{
int retval = 0;
ENTRY;
switch(opt->optname) {
case PSDEV_TIMEOUT:
opt->optval = izo_channels[minor].uc_timeout;
break;
case PSDEV_HARD:
opt->optval = izo_channels[minor].uc_hard;
break;
case PSDEV_NO_FILTER:
opt->optval = izo_channels[minor].uc_no_filter;
break;
case PSDEV_NO_JOURNAL:
opt->optval = izo_channels[minor].uc_no_journal;
break;
case PSDEV_NO_UPCALL:
opt->optval = izo_channels[minor].uc_no_upcall;
break;
#ifdef PSDEV_DEBUG
case PSDEV_ERRORVAL: {
int errorval = izo_channels[minor].uc_errorval;
if (errorval < 0 && is_read_only(-errorval))
CERROR("device %s has been set read-only\n",
kdevname(-errorval));
opt->optval = izo_channels[minor].uc_errorval;
break;
}
#endif
case PSDEV_TRACE:
case PSDEV_DEBUG:
case PSDEV_BYTES_TO_CLOSE:
default:
CDEBUG(D_PSDEV,
"ioctl: dogetopt: minor %d, bad optval 0x%x, \n",
minor, opt->optname);
retval = -EINVAL;
}
EXIT;
return retval;
}
/**
* @brief Finishes drawing a rectangle.
*/
void TilesetView::end_state_drawing_rectangle() {
QRect rectangle = current_area_item->rect().toRect();
if (!rectangle.isEmpty() &&
sceneRect().contains(rectangle) &&
get_items_intersecting_current_area().isEmpty() &&
model->is_selection_empty() &&
!is_read_only()) {
// Context menu to create a pattern.
QMenu menu;
EnumMenus<Ground>::create_actions(
menu, EnumMenuCheckableOption::NON_CHECKABLE, [=](Ground ground) {
QString pattern_id;
do {
++last_integer_pattern_id;
pattern_id = QString::number(last_integer_pattern_id);
} while (model->id_to_index(pattern_id) != -1);
emit create_pattern_requested(pattern_id, rectangle, ground);
});
// Put most actions in a submenu to make the context menu smaller.
QMenu sub_menu(tr("New pattern (more options)"));
int i = 0;
for (QAction* action : menu.actions()) {
Ground ground = static_cast<Ground>(action->data().toInt());
if (ground == Ground::TRAVERSABLE ||
ground == Ground::WALL) {
action->setText(tr("New pattern (%1)").arg(GroundTraits::get_friendly_name(ground)));
}
else {
menu.removeAction(action);
sub_menu.addAction(action);
}
++i;
}
menu.addMenu(&sub_menu);
menu.addSeparator();
menu.addAction(tr("Cancel"));
menu.exec(cursor().pos() + QPoint(1, 1));
}
scene->removeItem(current_area_item);
delete current_area_item;
current_area_item = nullptr;
initially_selected_items.clear();
start_state_normal();
}
/**
* @brief Receives a mouse press event.
* @param event The event to handle.
*/
void TilesetView::mousePressEvent(QMouseEvent* event) {
if (model == nullptr) {
return;
}
if (state == State::NORMAL) {
QList<QGraphicsItem*> items_under_mouse = items(
QRect(event->pos(), QSize(1, 1)),
Qt::IntersectsItemBoundingRect // Pick transparent items too.
);
QGraphicsItem* item = items_under_mouse.empty() ? nullptr : items_under_mouse.first();
const bool control_or_shift = (event->modifiers() & (Qt::ControlModifier | Qt::ShiftModifier));
bool keep_selected = false;
if (control_or_shift) {
// If ctrl or shift is pressed, keep the existing selection.
keep_selected = true;
}
else if (item != nullptr && item->isSelected()) {
// When clicking an already selected item, keep the existing selection too.
keep_selected = true;
}
if (!keep_selected) {
scene->clearSelection();
}
if (event->button() == Qt::LeftButton) {
if (item != nullptr &&
item->isSelected() &&
model->get_selection_count() == 1 &&
!is_read_only()) {
// Clicking on an already selected item: allow to move it.
start_state_moving_pattern(event->pos());
}
else {
// Otherwise initialize a selection rectangle.
initially_selected_items = scene->selectedItems();
start_state_drawing_rectangle(event->pos());
}
}
else {
if (item != nullptr && !item->isSelected()) {
// Select the right-clicked item.
item->setSelected(true);
}
}
}
}
/**
* @brief Shows a context menu with actions relative to the selected patterns.
*
* Does nothing if the view is in read-only mode.
*
* @param where Where to show the menu, in view coordinates.
*/
void TilesetView::show_context_menu(const QPoint& where) {
if (model == nullptr) {
return;
}
if (is_read_only()) {
return;
}
QList<int> selected_indexes = model->get_selected_indexes();
if (selected_indexes.empty()) {
return;
}
QMenu* menu = new QMenu(this);
// Ground.
build_context_menu_ground(*menu, selected_indexes);
// Default layer.
QMenu* layer_menu = new QMenu(tr("Default layer"), this);
build_context_menu_layer(*layer_menu, selected_indexes);
menu->addSeparator();
menu->addMenu(layer_menu);
// Repeat mode.
QMenu* repeat_mode_menu = new QMenu(tr("Repeatable"), this);
build_context_menu_repeat_mode(*repeat_mode_menu, selected_indexes);
menu->addSeparator();
menu->addMenu(repeat_mode_menu);
// Animation.
QMenu* animation_menu = new QMenu(tr("Animation"), this);
build_context_menu_animation(*animation_menu, selected_indexes);
menu->addSeparator();
menu->addMenu(animation_menu);
// Change pattern id.
menu->addSeparator();
change_pattern_id_action->setEnabled(model->get_selected_index() != -1);
menu->addAction(change_pattern_id_action);
// Delete patterns.
menu->addSeparator();
menu->addAction(delete_patterns_action);
// Create the menu at 1,1 to avoid the cursor being already in the first item.
menu->popup(viewport()->mapToGlobal(where) + QPoint(1, 1));
}
int env_remove( const wcstring &key, int var_mode )
{
ASSERT_IS_MAIN_THREAD();
env_node_t *first_node;
int erased = 0;
if( (var_mode & ENV_USER ) && is_read_only(key) )
{
return 2;
}
first_node = top;
if( ! (var_mode & ENV_UNIVERSAL ) )
{
if( var_mode & ENV_GLOBAL )
{
first_node = global_env;
}
if( try_remove( first_node, key.c_str(), var_mode ) )
{
event_t ev = event_t::variable_event(key);
ev.arguments.reset(new wcstring_list_t);
ev.arguments->push_back(L"VARIABLE");
ev.arguments->push_back(L"ERASE");
ev.arguments->push_back(key);
event_fire( &ev );
ev.arguments.reset(NULL);
erased = 1;
}
}
if( !erased &&
!(var_mode & ENV_GLOBAL) &&
!(var_mode & ENV_LOCAL) )
{
erased = ! env_universal_remove( key.c_str() );
}
react_to_variable_change(key);
return !erased;
}
bool
WndProperty::Editor::on_mouse_down(int x, int y)
{
if (parent->on_mouse_down(x, y))
return true;
#ifdef USE_GDI
// If the Control is read-only -> drop this event,
// so the default handler doesn't obtain the focus
if (is_read_only())
return true;
#endif
return false;
}
bool
WndProperty::Editor::OnKeyCheck(unsigned key_code) const
{
switch (key_code) {
case VK_RETURN:
return is_read_only() ||
(parent->mDataField != NULL && parent->mDataField->supports_combolist) ||
!CanEditInPlace() || parent->HasHelp();
case VK_LEFT:
case VK_RIGHT:
return true;
default:
return EditWindow::OnKeyCheck(key_code);
}
}
ssize_t GridFTPModule::read(gfal_file_handle handle, void* buffer, size_t count)
{
GridFTPFileDesc* desc = static_cast<GridFTPFileDesc*>(gfal_file_handle_get_fdesc(handle));
ssize_t ret;
Glib::Mutex::Lock locker(desc->lock);
if (desc->is_not_seeked() && is_read_only(desc->open_flags) && desc->stream != NULL) {
gfal_log(GFAL_VERBOSE_TRACE, " read in the GET main flow ... ");
ret = gridftp_read_stream(GFAL_GRIDFTP_SCOPE_READ, desc->stream, buffer, count);
}
else {
gfal_log(GFAL_VERBOSE_TRACE, " read with a pread ... ");
ret = gridftp_rw_internal_pread(_handle_factory, desc, buffer, count, desc->current_offset);
}
desc->current_offset += ret;
return ret;
}
bool
WndProperty::Editor::OnMouseDown(PixelScalar x, PixelScalar y)
{
if (parent->OnMouseDown(x, y))
return true;
#ifdef USE_GDI
// If the Control is read-only -> drop this event,
// so the default handler doesn't obtain the focus
if (is_read_only())
return true;
#endif
return EditWindow::OnMouseDown(x, y);
}
bool
WndProperty::Editor::on_key_check(unsigned key_code) const
{
switch (key_code) {
case VK_RETURN:
return is_read_only() ||
(parent->mDataField != NULL && parent->mDataField->SupportCombo) ||
!CanEditInPlace();
case VK_LEFT:
case VK_RIGHT:
return true;
default:
return false;
}
}
int do_mount(kdev_t dev, const char * dev_name, const char * dir_name, const char * type, int flags, void * data)
{
struct inode * dir_i;
struct super_block * sb;
struct vfsmount *vfsmnt;
int error;
if (!(flags & MS_RDONLY) && dev && is_read_only(dev))
return -EACCES;
/*flags |= MS_RDONLY;*/
error = namei(dir_name, &dir_i);
if (error)
return error;
if (dir_i->i_count != 1 || dir_i->i_mount) {
iput(dir_i);
return -EBUSY;
}
if (!S_ISDIR(dir_i->i_mode)) {
iput(dir_i);
return -ENOTDIR;
}
if (!fs_may_mount(dev)) {
iput(dir_i);
return -EBUSY;
}
sb = read_super(dev,type,flags,data,0);
if (!sb) {
iput(dir_i);
return -EINVAL;
}
if (sb->s_covered) {
iput(dir_i);
return -EBUSY;
}
vfsmnt = add_vfsmnt(dev, dev_name, dir_name);
if (vfsmnt) {
vfsmnt->mnt_sb = sb;
vfsmnt->mnt_flags = flags;
}
sb->s_covered = dir_i;
dir_i->i_mount = sb->s_mounted;
return 0; /* we don't iput(dir_i) - see umount */
}
bool
WndProperty::Editor::on_mouse_down(int x, int y)
{
// if it's an Combopicker field
if (parent->mDialogStyle)
// call the combopicker routine
if (parent->on_mouse_down(x, y))
return true;
#ifndef ENABLE_SDL
// If the Control is read-only -> drop this event,
// so the default handler doesn't obtain the focus
if (is_read_only())
return true;
#endif
return false;
}
/*
* Swap partitions are now read via brw_page. ll_rw_page is an
* asynchronous function now --- we must call wait_on_page afterwards
* if synchronous IO is required.
*/
void ll_rw_page(int rw, kdev_t dev, unsigned long page, char * buffer)
{
int block = page;
switch (rw) {
case READ:
break;
case WRITE:
if (is_read_only(dev)) {
printk("Can't page to read-only device %s\n",
kdevname(dev));
return;
}
break;
default:
panic("ll_rw_page: bad block dev cmd, must be R/W");
}
if (set_bit(PG_locked, &mem_map[MAP_NR(buffer)].flags))
panic ("ll_rw_page: page already locked");
brw_page(rw, (unsigned long) buffer, dev, &block, PAGE_SIZE, 0);
}
int SystemProperties::Add(const char* name, unsigned int namelen, const char* value,
unsigned int valuelen) {
if (valuelen >= PROP_VALUE_MAX && !is_read_only(name)) {
return -1;
}
if (namelen < 1) {
return -1;
}
if (!initialized_) {
return -1;
}
prop_area* serial_pa = contexts_->GetSerialPropArea();
if (serial_pa == nullptr) {
return -1;
}
prop_area* pa = contexts_->GetPropAreaForName(name);
if (!pa) {
async_safe_format_log(ANDROID_LOG_ERROR, "libc", "Access denied adding property \"%s\"", name);
return -1;
}
bool ret = pa->add(name, namelen, value, valuelen);
if (!ret) {
return -1;
}
// There is only a single mutator, but we want to make sure that
// updates are visible to a reader waiting for the update.
atomic_store_explicit(serial_pa->serial(),
atomic_load_explicit(serial_pa->serial(), memory_order_relaxed) + 1,
memory_order_release);
__futex_wake(serial_pa->serial(), INT32_MAX);
return 0;
}
static int do_remount_sb(struct super_block *sb, int flags, char *data)
{
int retval;
struct vfsmount *vfsmnt;
if (!(flags & MS_RDONLY) && sb->s_dev && is_read_only(sb->s_dev))
return -EACCES;
/*flags |= MS_RDONLY;*/
/* If we are remounting RDONLY, make sure there are no rw files open */
if ((flags & MS_RDONLY) && !(sb->s_flags & MS_RDONLY))
if (!fs_may_remount_ro(sb->s_dev))
return -EBUSY;
if (sb->s_op && sb->s_op->remount_fs) {
retval = sb->s_op->remount_fs(sb, &flags, data);
if (retval)
return retval;
}
sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
vfsmnt = lookup_vfsmnt(sb->s_dev);
if (vfsmnt)
vfsmnt->mnt_flags = sb->s_flags;
return 0;
}
static gboolean
is_any_change_read_only (xmlNodePtr current_node,
xmlNodePtr new_node)
{
GList *changes = get_toplevel_changes (current_node, new_node);
GList *iter;
gboolean read_only = FALSE;
for (iter = changes; iter != NULL; iter = iter->next) {
NodeDiff *diff = (NodeDiff *) iter->data;
if (is_read_only (diff->node_name,
diff->attribute_name)) {
read_only = TRUE;
break;
}
}
if (changes != NULL)
g_list_free_full (changes, (GDestroyNotify) node_diff_free);
return read_only;
}
int SystemProperties::Read(const prop_info* pi, char* name, char* value) {
while (true) {
uint32_t serial = Serial(pi); // acquire semantics
size_t len = SERIAL_VALUE_LEN(serial);
memcpy(value, pi->value, len + 1);
// TODO: Fix the synchronization scheme here.
// There is no fully supported way to implement this kind
// of synchronization in C++11, since the memcpy races with
// updates to pi, and the data being accessed is not atomic.
// The following fence is unintuitive, but would be the
// correct one if memcpy used memory_order_relaxed atomic accesses.
// In practice it seems unlikely that the generated code would
// would be any different, so this should be OK.
atomic_thread_fence(memory_order_acquire);
if (serial == load_const_atomic(&(pi->serial), memory_order_relaxed)) {
if (name != nullptr) {
size_t namelen = strlcpy(name, pi->name, PROP_NAME_MAX);
if (namelen >= PROP_NAME_MAX) {
async_safe_format_log(ANDROID_LOG_ERROR, "libc",
"The property name length for \"%s\" is >= %d;"
" please use __system_property_read_callback"
" to read this property. (the name is truncated to \"%s\")",
pi->name, PROP_NAME_MAX - 1, name);
}
}
if (is_read_only(pi->name) && pi->is_long()) {
async_safe_format_log(
ANDROID_LOG_ERROR, "libc",
"The property \"%s\" has a value with length %zu that is too large for"
" __system_property_get()/__system_property_read(); use"
" __system_property_read_callback() instead.",
pi->name, strlen(pi->long_value()));
}
return len;
}
}
}
/**
* @brief Changes the position of the rectangle the user is drawing or moving.
*
* If the specified area is the same as before, nothing is done.
*
* @param new_area new position of the rectangle.
*/
void TilesetView::set_current_area(const QRect& area) {
if (current_area_item->rect().toRect() == area) {
// No change.
return;
}
current_area_item->setRect(area);
if (state == State::DRAWING_RECTANGLE) {
// Select items strictly in the rectangle.
scene->clearSelection();
QPainterPath path;
path.addRect(QRect(area.topLeft() - QPoint(1, 1),
area.size() + QSize(2, 2)));
scene->setSelectionArea(path, Qt::ContainsItemBoundingRect);
}
if (state == State::MOVING_PATTERN) {
// Check overlapping existing patterns.
if (!area.isEmpty() &&
sceneRect().contains(area) &&
get_items_intersecting_current_area().isEmpty() &&
model->get_selection_count() == 1 &&
!is_read_only()) {
current_area_item->setPen(QPen(Qt::yellow));
} else {
current_area_item->setPen(QPen(Qt::red));
}
}
// Re-select items that were already selected if Ctrl or Shift was pressed.
for (QGraphicsItem* item : initially_selected_items) {
item->setSelected(true);
}
}
ssize_t block_write(struct file * filp, const char * buf,
size_t count, loff_t *ppos)
{
struct inode * inode = filp->f_dentry->d_inode;
ssize_t blocksize, blocksize_bits, i, buffercount, write_error;
ssize_t block, blocks;
loff_t offset;
ssize_t chars;
ssize_t written;
struct buffer_head * bhlist[NBUF];
size_t size;
kdev_t dev = inode->i_rdev;
struct buffer_head * bh, *bufferlist[NBUF];
register char * p;
if (is_read_only(dev))
return -EPERM;
written = write_error = buffercount = 0;
blocksize = BLOCK_SIZE;
if (blksize_size[MAJOR(dev)] && blksize_size[MAJOR(dev)][MINOR(dev)])
blocksize = blksize_size[MAJOR(dev)][MINOR(dev)];
i = blocksize;
blocksize_bits = 0;
while(i != 1) {
blocksize_bits++;
i >>= 1;
}
block = *ppos >> blocksize_bits;
offset = *ppos & (blocksize-1);
if (blk_size[MAJOR(dev)])
size = ((loff_t) blk_size[MAJOR(dev)][MINOR(dev)] << BLOCK_SIZE_BITS) >> blocksize_bits;
else
int env_set(const wcstring &key, const wchar_t *val, env_mode_flags_t var_mode)
{
ASSERT_IS_MAIN_THREAD();
bool has_changed_old = has_changed_exported;
bool has_changed_new = false;
int done=0;
if (val && contains(key, L"PWD", L"HOME"))
{
/* Canoncalize our path; if it changes, recurse and try again. */
wcstring val_canonical = val;
path_make_canonical(val_canonical);
if (val != val_canonical)
{
return env_set(key, val_canonical.c_str(), var_mode);
}
}
if ((var_mode & (ENV_LOCAL | ENV_UNIVERSAL)) && (is_read_only(key) || is_electric(key)))
{
return ENV_SCOPE;
}
if ((var_mode & ENV_EXPORT) && is_electric(key))
{
return ENV_SCOPE;
}
if ((var_mode & ENV_USER) && is_read_only(key))
{
return ENV_PERM;
}
if (key == L"umask")
{
wchar_t *end;
/*
Set the new umask
*/
if (val && wcslen(val))
{
errno=0;
long mask = wcstol(val, &end, 8);
if (!errno && (!*end) && (mask <= 0777) && (mask >= 0))
{
umask(mask);
/* Do not actually create a umask variable, on env_get, it will be calculated dynamically */
return 0;
}
}
return ENV_INVALID;
}
/*
Zero element arrays are internaly not coded as null but as this
placeholder string
*/
if (!val)
{
val = ENV_NULL;
}
if (var_mode & ENV_UNIVERSAL)
{
const bool old_export = uvars() && uvars()->get_export(key);
bool new_export;
if (var_mode & ENV_EXPORT)
{
// export
new_export = true;
}
else if (var_mode & ENV_UNEXPORT)
{
// unexport
new_export = false;
}
else
{
// not changing the export
new_export = old_export;
}
if (uvars())
{
uvars()->set(key, val, new_export);
env_universal_barrier();
if (old_export || new_export)
{
mark_changed_exported();
}
}
}
else
{
// Determine the node
env_node_t *preexisting_node = env_get_node(key);
bool preexisting_entry_exportv = false;
if (preexisting_node != NULL)
{
var_table_t::const_iterator result = preexisting_node->env.find(key);
assert(result != preexisting_node->env.end());
const var_entry_t &entry = result->second;
if (entry.exportv)
{
preexisting_entry_exportv = true;
has_changed_new = true;
}
}
env_node_t *node = NULL;
if (var_mode & ENV_GLOBAL)
{
node = global_env;
}
else if (var_mode & ENV_LOCAL)
{
node = top;
}
else if (preexisting_node != NULL)
{
node = preexisting_node;
if ((var_mode & (ENV_EXPORT | ENV_UNEXPORT)) == 0)
{
// use existing entry's exportv
var_mode = preexisting_entry_exportv ? ENV_EXPORT : 0;
}
}
else
{
if (! get_proc_had_barrier())
{
set_proc_had_barrier(true);
env_universal_barrier();
}
if (uvars() && ! uvars()->get(key).missing())
{
bool exportv;
if (var_mode & ENV_EXPORT)
{
exportv = true;
}
else if (var_mode & ENV_UNEXPORT)
{
exportv = false;
}
else
{
exportv = uvars()->get_export(key);
}
uvars()->set(key, val, exportv);
env_universal_barrier();
done = 1;
}
else
{
/*
New variable with unspecified scope. The default
scope is the innermost scope that is shadowing,
which will be either the current function or the
global scope.
*/
node = top;
while (node->next && !node->new_scope)
{
node = node->next;
}
}
}
if (!done)
{
// Set the entry in the node
// Note that operator[] accesses the existing entry, or creates a new one
var_entry_t &entry = node->env[key];
if (entry.exportv)
{
// this variable already existed, and was exported
has_changed_new = true;
}
entry.val = val;
if (var_mode & ENV_EXPORT)
{
// the new variable is exported
entry.exportv = true;
node->exportv = true;
has_changed_new = true;
}
else
{
entry.exportv = false;
}
if (has_changed_old || has_changed_new)
mark_changed_exported();
}
}
event_t ev = event_t::variable_event(key);
ev.arguments.reserve(3);
ev.arguments.push_back(L"VARIABLE");
ev.arguments.push_back(L"SET");
ev.arguments.push_back(key);
// debug( 1, L"env_set: fire events on variable %ls", key );
event_fire(&ev);
// debug( 1, L"env_set: return from event firing" );
react_to_variable_change(key);
return 0;
}
void env_init(const struct config_paths_t *paths /* or NULL */)
{
/*
env_read_only variables can not be altered directly by the user
*/
const wchar_t * const ro_keys[] =
{
L"status",
L"history",
L"version",
L"_",
L"LINES",
L"COLUMNS",
L"PWD",
//L"SHLVL", // will be inserted a bit lower down
L"FISH_VERSION",
};
for (size_t i=0; i < sizeof ro_keys / sizeof *ro_keys; i++)
{
env_read_only.insert(ro_keys[i]);
}
/*
Names of all dynamically calculated variables
*/
env_electric.insert(L"history");
env_electric.insert(L"status");
env_electric.insert(L"umask");
env_electric.insert(L"COLUMNS");
env_electric.insert(L"LINES");
top = new env_node_t;
global_env = top;
global = &top->env;
/*
Now the environemnt variable handling is set up, the next step
is to insert valid data
*/
/*
Import environment variables
*/
for (char **p = (environ ? environ : __environ); p && *p; p++)
{
const wcstring key_and_val = str2wcstring(*p); //like foo=bar
size_t eql = key_and_val.find(L'=');
if (eql == wcstring::npos)
{
// no equals found
if (is_read_only(key_and_val) || is_electric(key_and_val)) continue;
env_set(key_and_val, L"", ENV_EXPORT | ENV_GLOBAL);
}
else
{
wcstring key = key_and_val.substr(0, eql);
if (is_read_only(key) || is_electric(key)) continue;
wcstring val = key_and_val.substr(eql + 1);
if (variable_is_colon_delimited_array(key))
{
std::replace(val.begin(), val.end(), L':', ARRAY_SEP);
}
env_set(key, val.c_str(), ENV_EXPORT | ENV_GLOBAL);
}
}
/* Set the given paths in the environment, if we have any */
if (paths != NULL)
{
env_set(FISH_DATADIR_VAR, paths->data.c_str(), ENV_GLOBAL);
env_set(FISH_SYSCONFDIR_VAR, paths->sysconf.c_str(), ENV_GLOBAL);
env_set(FISH_HELPDIR_VAR, paths->doc.c_str(), ENV_GLOBAL);
env_set(FISH_BIN_DIR, paths->bin.c_str(), ENV_GLOBAL);
}
/*
Set up the PATH variable
*/
setup_path();
/*
Set up the USER variable
*/
if (env_get_string(L"USER").missing_or_empty())
{
const struct passwd *pw = getpwuid(getuid());
if (pw && pw->pw_name)
{
const wcstring uname = str2wcstring(pw->pw_name);
env_set(L"USER", uname.c_str(), ENV_GLOBAL | ENV_EXPORT);
}
}
/*
Set up the version variables
*/
wcstring version = str2wcstring(get_fish_version());
env_set(L"version", version.c_str(), ENV_GLOBAL);
env_set(L"FISH_VERSION", version.c_str(), ENV_GLOBAL);
/*
Set up SHLVL variable
*/
const env_var_t shlvl_str = env_get_string(L"SHLVL");
wcstring nshlvl_str = L"1";
if (! shlvl_str.missing())
{
wchar_t *end;
long shlvl_i = wcstol(shlvl_str.c_str(), &end, 10);
while (iswspace(*end)) ++end; /* skip trailing whitespace */
if (shlvl_i >= 0 && *end == '\0')
{
nshlvl_str = to_string<long>(shlvl_i + 1);
}
}
env_set(L"SHLVL", nshlvl_str.c_str(), ENV_GLOBAL | ENV_EXPORT);
env_read_only.insert(L"SHLVL");
/* Set up the HOME variable */
if (env_get_string(L"HOME").missing_or_empty())
{
const env_var_t unam = env_get_string(L"USER");
char *unam_narrow = wcs2str(unam.c_str());
struct passwd *pw = getpwnam(unam_narrow);
if (pw->pw_dir != NULL)
{
const wcstring dir = str2wcstring(pw->pw_dir);
env_set(L"HOME", dir.c_str(), ENV_GLOBAL | ENV_EXPORT);
}
free(unam_narrow);
}
/* Set PWD */
env_set_pwd();
/* Set up universal variables. The empty string means to use the deafult path. */
assert(s_universal_variables == NULL);
s_universal_variables = new env_universal_t(L"");
s_universal_variables->load();
/* Set g_log_forks */
env_var_t log_forks = env_get_string(L"fish_log_forks");
g_log_forks = ! log_forks.missing_or_empty() && from_string<bool>(log_forks);
/* Set g_use_posix_spawn. Default to true. */
env_var_t use_posix_spawn = env_get_string(L"fish_use_posix_spawn");
g_use_posix_spawn = (use_posix_spawn.missing_or_empty() ? true : from_string<bool>(use_posix_spawn));
/* Set fish_bind_mode to "default" */
env_set(FISH_BIND_MODE_VAR, DEFAULT_BIND_MODE, ENV_GLOBAL);
/*
Now that the global scope is fully initialized, add a toplevel local
scope. This same local scope will persist throughout the lifetime of the
fish process, and it will ensure that `set -l` commands run at the
command-line don't affect the global scope.
*/
env_push(false);
}