Exemplos de isic_attach_fritzpcmcia em C++ (Cpp)

Exemplo n.º 1

Arquivo: isic_isa.c Projeto: RyanLucchese/rumpkernel-netbsd-src

static int
isicattach(int flags, struct isic_softc *sc)
{
	int ret = 0;
	const char *drvid;

#ifdef __FreeBSD__

	struct isic_softc *sc = &l1_sc[dev->id_unit];
#define	PARM	dev
#define	PARM2	dev, iobase2
#define	FLAGS	dev->id_flags

#elif defined(__bsdi__)

	struct isic_softc *sc = device_private(self);
#define	PARM	parent, self, ia
#define	PARM2	parent, self, ia
#define	FLAGS	sc->sc_flags

#else

#define PARM	sc
#define PARM2	sc
#define	FLAGS	flags

#endif /* __FreeBSD__ */

  	static const char *ISACversion[] = {
  		"2085 Version A1/A2 or 2086/2186 Version 1.1",
		"2085 Version B1",
		"2085 Version B2",
		"2085 Version V2.3 (B3)",
		"Unknown Version"
	};

	static const char *HSCXversion[] = {
		"82525 Version A1",
		"Unknown (0x01)",
		"82525 Version A2",
		"Unknown (0x03)",
		"82525 Version A3",
		"82525 or 21525 Version 2.1",
		"Unknown Version"
	};

	/* card dependent setup */
	switch(FLAGS)
	{
#ifdef ISICISA_DYNALINK
#if defined(__bsdi__) || defined(__FreeBSD__)
		case FLAG_DYNALINK:
			ret = isic_attach_Dyn(PARM2);
			break;
#endif
#endif

#ifdef ISICISA_TEL_S0_8
		case FLAG_TELES_S0_8:
			ret = isic_attach_s08(PARM);
			break;
#endif

#ifdef ISICISA_TEL_S0_16
		case FLAG_TELES_S0_16:
			ret = isic_attach_s016(PARM);
			break;
#endif

#ifdef ISICISA_TEL_S0_16_3
		case FLAG_TELES_S0_163:
			ret = isic_attach_s0163(PARM);
			break;
#endif

#ifdef ISICISA_AVM_A1
		case FLAG_AVM_A1:
			ret = isic_attach_avma1(PARM);
			break;
#endif

#ifdef ISICISA_USR_STI
		case FLAG_USR_ISDN_TA_INT:
			ret = isic_attach_usrtai(PARM);
			break;
#endif

#ifdef ISICISA_ITKIX1
		case FLAG_ITK_IX1:
			ret = isic_attach_itkix1(PARM);
			break;
#endif

#ifdef ISICISA_ELSA_PCC16
		case FLAG_ELSA_PCC16:
			ret = isic_attach_Eqs1pi(dev, 0);
			break;
#endif

#ifdef amiga
		case FLAG_BLMASTER:
			ret = 1; /* full detection was done in caller */
			break;
#endif

/* ======================================================================
 * Only P&P cards follow below!!!
 */

#ifdef __FreeBSD__		/* we've already splitted all non-ISA stuff
				   out of this ISA specific part for the other
				   OS */

#ifdef AVM_A1_PCMCIA
		case FLAG_AVM_A1_PCMCIA:
                      ret = isic_attach_fritzpcmcia(PARM);
			break;
#endif

#ifdef TEL_S0_16_3_P
		case FLAG_TELES_S0_163_PnP:
			ret = isic_attach_s0163P(PARM2);
			break;
#endif

#ifdef CRTX_S0_P
		case FLAG_CREATIX_S0_PnP:
			ret = isic_attach_Cs0P(PARM2);
			break;
#endif

#ifdef DRN_NGO
		case FLAG_DRN_NGO:
			ret = isic_attach_drnngo(PARM2);
			break;
#endif

#ifdef SEDLBAUER
		case FLAG_SWS:
			ret = isic_attach_sws(PARM);
			break;
#endif

#ifdef ELSA_QS1ISA
		case FLAG_ELSA_QS1P_ISA:
			ret = isic_attach_Eqs1pi(PARM2);
			break;
#endif

#ifdef AVM_PNP
		case FLAG_AVM_PNP:
			ret = isic_attach_avm_pnp(PARM2);
			ret = 0;
			break;
#endif

#ifdef SIEMENS_ISURF2
		case FLAG_SIEMENS_ISURF2:
			ret = isic_attach_siemens_isurf(PARM2);
			break;
#endif

#ifdef ASUSCOM_IPAC
		case FLAG_ASUSCOM_IPAC:
			ret = isic_attach_asi(PARM2);
			break;
#endif

#endif /* __FreeBSD__ / P&P specific part */

		default:
			break;
	}

	if(ret == 0)
		return(0);

	if(sc->sc_ipac)
	{
		sc->sc_ipac_version = IPAC_READ(IPAC_ID);

		switch(sc->sc_ipac_version)
		{
			case IPAC_V11:
			case IPAC_V12:
				break;

			default:
				aprint_error_dev(sc->sc_dev, "Error, IPAC version %d unknown!\n", ret);
				return(0);
				break;
		}
	}
	else
	{
		sc->sc_isac_version = ((ISAC_READ(I_RBCH)) >> 5) & 0x03;

		switch(sc->sc_isac_version)
		{
			case ISAC_VA:
			case ISAC_VB1:
			case ISAC_VB2:
			case ISAC_VB3:
				break;

			default:
				printf(ISIC_FMT "Error, ISAC version %d unknown!\n",
				ISIC_PARM, sc->sc_isac_version);
				return(0);
				break;
		}

		sc->sc_hscx_version = HSCX_READ(0, H_VSTR) & 0xf;

		switch(sc->sc_hscx_version)
		{
			case HSCX_VA1:
			case HSCX_VA2:
			case HSCX_VA3:
			case HSCX_V21:
				break;

			default:
				printf(ISIC_FMT "Error, HSCX version %d unknown!\n",
					ISIC_PARM, sc->sc_hscx_version);
				return(0);
				break;
		}
	}

        sc->sc_intr_valid = ISIC_INTR_DISABLED;

	/* HSCX setup */

	isic_bchannel_setup(sc, HSCX_CH_A, BPROT_NONE, 0);

	isic_bchannel_setup(sc, HSCX_CH_B, BPROT_NONE, 0);

	/* setup linktab */

	isic_init_linktab(sc);

	/* set trace level */

	sc->sc_trace = TRACE_OFF;

	sc->sc_state = ISAC_IDLE;

	sc->sc_ibuf = NULL;
	sc->sc_ib = NULL;
	sc->sc_ilen = 0;

	sc->sc_obuf = NULL;
	sc->sc_op = NULL;
	sc->sc_ol = 0;
	sc->sc_freeflag = 0;

	sc->sc_obuf2 = NULL;
	sc->sc_freeflag2 = 0;

#if defined(__FreeBSD__) && __FreeBSD__ >=3
	callout_handle_init(&sc->sc_T3_callout);
	callout_handle_init(&sc->sc_T4_callout);
#endif

#if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000
	callout_init(&sc->sc_T3_callout, 0);
	callout_init(&sc->sc_T4_callout, 0);
#endif

	/* announce manufacturer and card type */

	switch(FLAGS)
	{
		case FLAG_TELES_S0_8:
			drvid = "Teles S0/8 or Niccy 1008";
			break;

		case FLAG_TELES_S0_16:
			drvid = "Teles S0/16, Creatix ISDN S0-16 or Niccy 1016";
			break;

		case FLAG_TELES_S0_163:
			drvid = "Teles S0/16.3";
			break;

		case FLAG_AVM_A1:
			drvid = "AVM A1 or AVM Fritz!Card";
			break;

		case FLAG_AVM_A1_PCMCIA:
			drvid = "AVM PCMCIA Fritz!Card";
			break;

		case FLAG_TELES_S0_163_PnP:
			drvid = "Teles S0/PnP";
			break;

		case FLAG_CREATIX_S0_PnP:
			drvid = "Creatix ISDN S0-16 P&P";
			break;

		case FLAG_USR_ISDN_TA_INT:
			drvid = "USRobotics Sportster ISDN TA intern";
			break;

		case FLAG_DRN_NGO:
			drvid = "Dr. Neuhaus NICCY Go@";
			break;

		case FLAG_DYNALINK:
			drvid = "Dynalink IS64PH";
			break;

		case FLAG_SWS:
			drvid = "Sedlbauer WinSpeed";
			break;

		case FLAG_BLMASTER:
			/* board announcement was done by caller */
			drvid = (char *)0;
			break;

		case FLAG_ELSA_QS1P_ISA:
			drvid = "ELSA QuickStep 1000pro (ISA)";
			break;

		case FLAG_ITK_IX1:
			drvid = "ITK ix1 micro";
			break;

		case FLAG_ELSA_PCC16:
			drvid = "ELSA PCC-16";
			break;

		case FLAG_ASUSCOM_IPAC:
			drvid = "Asuscom ISDNlink 128K PnP";
			break;

		case FLAG_SIEMENS_ISURF2:
			drvid = "Siemens I-Surf 2.0";
			break;

		default:
			drvid = "ERROR, unknown flag used";
			break;
	}
#ifndef __FreeBSD__
	printf("\n");
#endif
	if (drvid)
		printf(ISIC_FMT "%s\n", ISIC_PARM, drvid);

	/* announce chip versions */

	if(sc->sc_ipac)
	{
		if(sc->sc_ipac_version == IPAC_V11)
			printf(ISIC_FMT "IPAC PSB2115 Version 1.1\n", ISIC_PARM);
		else
			printf(ISIC_FMT "IPAC PSB2115 Version 1.2\n", ISIC_PARM);
	}
	else
	{
		if(sc->sc_isac_version >= ISAC_UNKN)
		{
			printf(ISIC_FMT "ISAC Version UNKNOWN (VN=0x%x)" TERMFMT,
					ISIC_PARM,
					sc->sc_isac_version);
			sc->sc_isac_version = ISAC_UNKN;
		}
		else
		{
			printf(ISIC_FMT "ISAC %s (IOM-%c)" TERMFMT,
					ISIC_PARM,
					ISACversion[sc->sc_isac_version],
					sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2');
		}

#ifdef __FreeBSD__
		printf("(Addr=0x%lx)\n", (u_long)ISAC_BASE);
#endif

		if(sc->sc_hscx_version >= HSCX_UNKN)
		{
			printf(ISIC_FMT "HSCX Version UNKNOWN (VN=0x%x)" TERMFMT,
					ISIC_PARM,
					sc->sc_hscx_version);
			sc->sc_hscx_version = HSCX_UNKN;
		}
		else
		{
			printf(ISIC_FMT "HSCX %s" TERMFMT,
					ISIC_PARM,
					HSCXversion[sc->sc_hscx_version]);
		}

#ifdef __FreeBSD__
		printf("(AddrA=0x%lx, AddrB=0x%lx)\n", (u_long)HSCX_A_BASE, (u_long)HSCX_B_BASE);

#endif /* __FreeBSD__ */
	}

#ifdef __FreeBSD__
	next_isic_unit++;

#if defined(__FreeBSD_version) && __FreeBSD_version >= 300003

	/* set the interrupt handler - no need to change isa_device.h */
	dev->id_intr = (inthand2_t *)isicintr;

#endif

#endif /* __FreeBSD__ */

	/* init higher protocol layers */
	isic_attach_bri(sc, drvid, &isic_std_driver);

	return(1);
#undef PARM
#undef FLAGS
}

Exemplo n.º 2

Arquivo: i4b_isic_isa.c Projeto: UnitedMarsupials/kame

int
isicattach(int flags, struct isic_softc *sc)

#endif /* __FreeBSD__ */
{
	int ret = 0;
	char *drvid;

#ifdef __FreeBSD__
	struct isic_softc *sc = &isic_sc[dev->id_unit];
#define	PARM	dev
#define	PARM2	dev, iobase2
#define	FLAGS	dev->id_flags
#else
#define PARM	sc
#define PARM2	sc
#define	FLAGS	flags
#endif

  	static char *ISACversion[] = {
  		"2085 Version A1/A2 or 2086/2186 Version 1.1",
		"2085 Version B1",
		"2085 Version B2",
		"2085 Version V2.3 (B3)",
		"Unknown Version"
	};

	static char *HSCXversion[] = {
		"82525 Version A1",
		"Unknown (0x01)",
		"82525 Version A2",
		"Unknown (0x03)",
		"82525 Version A3",
		"82525 or 21525 Version 2.1",
		"Unknown Version"
	};

	/* done in bus specific attach code for other OS */

#ifdef __FreeBSD__
	if(dev->id_unit != next_isic_unit)
	{
		printf("isicattach: Error: new unit (%d) != next_isic_unit (%d)!\n", dev->id_unit, next_isic_unit);
		return(0);
	}

	sc->sc_unit = dev->id_unit;
#else
	isic_sc[sc->sc_unit] = sc;
#endif
	
	/* card dependent setup */
	switch(FLAGS)
	{
#ifdef DYNALINK
		case FLAG_DYNALINK:
			ret = isic_attach_Dyn(PARM2);
			break;
#endif

#ifdef TEL_S0_8
		case FLAG_TELES_S0_8:
			ret = isic_attach_s08(PARM);
			break;
#endif

#ifdef TEL_S0_16
		case FLAG_TELES_S0_16:
			ret = isic_attach_s016(PARM);
			break;
#endif

#ifdef TEL_S0_16_3
		case FLAG_TELES_S0_163:
			ret = isic_attach_s0163(PARM);		
			break;
#endif

#ifdef AVM_A1
		case FLAG_AVM_A1:
			ret = isic_attach_avma1(PARM);
			break;
#endif

#ifdef USR_STI
		case FLAG_USR_ISDN_TA_INT:
			ret = isic_attach_usrtai(PARM);		
			break;
#endif

#ifdef ITKIX1
		case FLAG_ITK_IX1:
			ret = isic_attach_itkix1(PARM);
			break;
#endif

/* ======================================================================
 * Only P&P cards follow below!!!
 */
#ifdef __FreeBSD__		/* we've already splitted all non-ISA stuff
				   out of this ISA specific part for the other
				   OS */

#ifdef AVM_PCMCIA
		case FLAG_AVM_A1_PCMCIA:
			ret = isic_attach_fritzpcmcia(PARM);
			break;
#endif

#ifndef __FreeBSD__
#ifdef TEL_S0_16_3_P
		case FLAG_TELES_S0_163_PnP:
			ret = isic_attach_s0163P(PARM2);
			break;
#endif
#endif

#ifdef CRTX_S0_P
		case FLAG_CREATIX_S0_PnP:
			ret = isic_attach_Cs0P(PARM2);		
			break;
#endif

#ifdef DRN_NGO
		case FLAG_DRN_NGO:
			ret = isic_attach_drnngo(PARM2);		
			break;
#endif

#ifdef SEDLBAUER
		case FLAG_SWS:
			ret = isic_attach_sws(PARM);
			break;
#endif

#ifdef ELSA_QS1ISA
		case FLAG_ELSA_QS1P_ISA:
			ret = isic_attach_Eqs1pi(PARM2);
			break;
#endif

#endif /* __FreeBSD__ / P&P specific part */

/* --- XXX - don't know how to handle this - should be removed!!!! ---- */
#ifdef amiga
		case FLAG_BLMASTER:
			ret = 1; /* full detection was done in caller */
			break;
#endif
/* ------------------------------------------------------------------- */

		default:
			break;
	}

	if(ret == 0)
		return(0);
		
	sc->sc_isac_version = 0;
	sc->sc_isac_version = ((ISAC_READ(I_RBCH)) >> 5) & 0x03;

	switch(sc->sc_isac_version)
	{
		case ISAC_VA:
		case ISAC_VB1:
                case ISAC_VB2:
		case ISAC_VB3:
			break;

		default:
			printf(ISIC_FMT "Error, ISAC version %d unknown!\n",
				ISIC_PARM, sc->sc_isac_version);
			return(0);
			break;
	}

	sc->sc_hscx_version = HSCX_READ(0, H_VSTR) & 0xf;

	switch(sc->sc_hscx_version)
	{
		case HSCX_VA1:
		case HSCX_VA2:
		case HSCX_VA3:
		case HSCX_V21:
			break;
			
		default:
			printf(ISIC_FMT "Error, HSCX version %d unknown!\n",
				ISIC_PARM, sc->sc_hscx_version);
			return(0);
			break;
	};

	/* ISAC setup */
	
	isic_isac_init(sc);

	/* HSCX setup */

	isic_bchannel_setup(sc->sc_unit, HSCX_CH_A, BPROT_NONE, 0);
	
	isic_bchannel_setup(sc->sc_unit, HSCX_CH_B, BPROT_NONE, 0);

	/* setup linktab */

	isic_init_linktab(sc);

	/* set trace level */

	sc->sc_trace = TRACE_OFF;

	sc->sc_state = ISAC_IDLE;

	sc->sc_ibuf = NULL;
	sc->sc_ib = NULL;
	sc->sc_ilen = 0;

	sc->sc_obuf = NULL;
	sc->sc_op = NULL;
	sc->sc_ol = 0;
	sc->sc_freeflag = 0;

	sc->sc_obuf2 = NULL;
	sc->sc_freeflag2 = 0;

#if defined(__FreeBSD__) && __FreeBSD__ >=3
	callout_handle_init(&sc->sc_T3_callout);
	callout_handle_init(&sc->sc_T4_callout);	
#endif
	
	/* init higher protocol layers */
	
	MPH_Status_Ind(sc->sc_unit, STI_ATTACH, sc->sc_cardtyp);
	
	/* announce manufacturer and card type */
	
	switch(FLAGS)
	{
		case FLAG_TELES_S0_8:
			drvid = "Teles S0/8 or Niccy 1008";
			break;

		case FLAG_TELES_S0_16:
			drvid = "Teles S0/16, Creatix ISDN S0-16 or Niccy 1016";
			break;

		case FLAG_TELES_S0_163:
			drvid = "Teles S0/16.3";
			break;

		case FLAG_AVM_A1:
			drvid = "AVM A1 or AVM Fritz!Card";
			break;

		case FLAG_AVM_A1_PCMCIA:
			drvid = "AVM PCMCIA Fritz!Card";
			break;

		case FLAG_TELES_S0_163_PnP:
			drvid = "Teles S0/PnP";
			break;

		case FLAG_CREATIX_S0_PnP:
			drvid = "Creatix ISDN S0-16 P&P";
			break;

		case FLAG_USR_ISDN_TA_INT:
			drvid = "USRobotics Sportster ISDN TA intern";
			break;

		case FLAG_DRN_NGO:
			drvid = "Dr. Neuhaus NICCY Go@";
			break;

		case FLAG_DYNALINK:
			drvid = "Dynalink IS64PH";
			break;

		case FLAG_SWS:
			drvid = "Sedlbauer WinSpeed";
			break;

		case FLAG_BLMASTER:
			/* board announcement was done by caller */
			drvid = (char *)0;
			break;

		case FLAG_ELSA_QS1P_ISA:
			drvid = "ELSA QuickStep 1000pro (ISA)";
			break;

		case FLAG_ITK_IX1:
			drvid = "ITK ix1 micro";
			break;

		default:
			drvid = "ERROR, unknown flag used";
			break;
	}
#ifndef __FreeBSD__
	printf("\n");
#endif
	if (drvid)
		printf(ISIC_FMT "%s\n", ISIC_PARM, drvid);

	/* announce chip versions */
	
	if(sc->sc_isac_version >= ISAC_UNKN)
	{
		printf(ISIC_FMT "ISAC Version UNKNOWN (VN=0x%x)" TERMFMT,
				ISIC_PARM,
				sc->sc_isac_version);
		sc->sc_isac_version = ISAC_UNKN;
	}
	else
	{
		printf(ISIC_FMT "ISAC %s (IOM-%c)" TERMFMT,
				ISIC_PARM,
				ISACversion[sc->sc_isac_version],
				sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2');
	}

#ifdef __FreeBSD__
	printf("(Addr=0x%lx)\n", (u_long)ISAC_BASE);
#endif
		
	if(sc->sc_hscx_version >= HSCX_UNKN)
	{
		printf(ISIC_FMT "HSCX Version UNKNOWN (VN=0x%x)" TERMFMT,
				ISIC_PARM,
				sc->sc_hscx_version);
		sc->sc_hscx_version = HSCX_UNKN;
	}
	else
	{
		printf(ISIC_FMT "HSCX %s" TERMFMT,
				ISIC_PARM,
				HSCXversion[sc->sc_hscx_version]);
	}

#ifdef __FreeBSD__	
	printf("(AddrA=0x%lx, AddrB=0x%lx)\n", (u_long)HSCX_A_BASE, (u_long)HSCX_B_BASE);

	next_isic_unit++;

#if defined(__FreeBSD_version) && __FreeBSD_version >= 300003

	/* set the interrupt handler - no need to change isa_device.h */
	dev->id_intr = (inthand2_t *)isicintr;

#endif

#endif /* __FreeBSD__ */

	return(1);
#undef PARM
#undef FLAGS
}