bool InvokeDXFDialogBoardImport( PCB_BASE_FRAME* aCaller )
{
DIALOG_DXF_IMPORT dlg( aCaller );
bool success = ( dlg.ShowModal() == wxID_OK );
if( success )
{
const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
PICKED_ITEMS_LIST picklist;
BOARD* board = aCaller->GetBoard();
std::list<BOARD_ITEM*>::const_iterator it, itEnd;
for( it = list.begin(), itEnd = list.end(); it != itEnd; ++it )
{
BOARD_ITEM* item = *it;
board->Add( item );
ITEM_PICKER itemWrapper( item, UR_NEW );
picklist.PushItem( itemWrapper );
}
aCaller->SaveCopyInUndoList( picklist, UR_NEW, wxPoint( 0, 0 ) );
aCaller->OnModify();
}
return success;
}
/**
* Function DeleteItemsInList
* delete schematic items in aItemsList
* deleted items are put in undo list
*/
void DeleteItemsInList( EDA_DRAW_PANEL* panel, PICKED_ITEMS_LIST& aItemsList )
{
SCH_SCREEN* screen = (SCH_SCREEN*) panel->GetScreen();
SCH_EDIT_FRAME* frame = (SCH_EDIT_FRAME*) panel->GetParent();
PICKED_ITEMS_LIST itemsList;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
ITEM_PICKER itemWrapper( item, UR_DELETED );
if( item->Type() == SCH_SHEET_PIN_T )
{
/* this item is depending on a sheet, and is not in global list */
wxMessageBox( wxT( "DeleteItemsInList() err: unexpected SCH_SHEET_PIN_T" ) );
}
else
{
screen->Remove( item );
/* Unlink the structure */
itemsList.PushItem( itemWrapper );
}
}
frame->SaveCopyInUndoList( itemsList, UR_DELETED );
}
/*
* Function SaveCopyInUndoList
* Create a copy of the current board item, and put it in the undo list.
*
* aCommandType =
* UR_CHANGED
* UR_NEW
* UR_DELETED
* UR_MOVED
* UR_FLIPPED
* UR_ROTATED
*/
void PCB_EDIT_FRAME::SaveCopyInUndoList( BOARD_ITEM* aItem,
UNDO_REDO_T aCommandType,
const wxPoint& aTransformPoint )
{
if( aItem == NULL ) // Nothing to save
return;
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
ITEM_PICKER itemWrapper( aItem, aCommandType );
switch( aCommandType )
{
case UR_CHANGED: // Create a copy of item
if( itemWrapper.GetLink() == NULL ) // When not null, the copy is already done
itemWrapper.SetLink( aItem->Clone() );
commandToUndo->PushItem( itemWrapper );
break;
case UR_NEW:
case UR_DELETED:
#ifdef USE_WX_OVERLAY
m_canvas->Refresh();
#endif
case UR_MOVED:
case UR_FLIPPED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
commandToUndo->PushItem( itemWrapper );
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), aCommandType );
wxMessageBox( msg );
}
break;
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else
{
delete commandToUndo;
}
}
void SCH_EDIT_FRAME::SaveCopyInUndoList( SCH_ITEM* aItem,
UNDO_REDO_T aCommandType,
const wxPoint& aTransformPoint )
{
/* Does not save a null item or a UR_WIRE_IMAGE command type. UR_WIRE_IMAGE commands
* are handled by the overloaded version of SaveCopyInUndoList that takes a reference
* to a PICKED_ITEMS_LIST.
*/
if( aItem == NULL || aCommandType == UR_WIRE_IMAGE )
return;
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
ITEM_PICKER itemWrapper( aItem, aCommandType );
if( aItem )
itemWrapper.SetFlags( aItem->GetFlags() );
switch( aCommandType )
{
case UR_CHANGED: /* Create a copy of item */
itemWrapper.SetLink( DuplicateStruct( aItem, true ) );
commandToUndo->PushItem( itemWrapper );
break;
case UR_NEW:
case UR_DELETED:
case UR_ROTATED:
case UR_MOVED:
commandToUndo->PushItem( itemWrapper );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "SaveCopyInUndoList() error (unknown code %X)" ),
aCommandType ) );
break;
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else
{
delete commandToUndo;
}
}
void SCH_EDIT_FRAME::DeleteItemsInList( PICKED_ITEMS_LIST& aItemsList, bool aAppend )
{
PICKED_ITEMS_LIST itemsList;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
ITEM_PICKER itemWrapper( item, UR_DELETED );
if( item->GetFlags() & STRUCT_DELETED )
continue;
DeleteItem( item, aAppend );
aAppend = true;
}
GetScreen()->ClearDrawingState();
}
/*
* Function GlobalChange_PadSettings
* Function to change pad caracteristics for the given footprint
* or alls footprints which look like the given footprint
* aPad is the pattern. The given footprint is the parent of this pad
* aSameFootprints: if true, make changes on all identical footprints
* aPadShapeFilter: if true, make changes only on pads having the same shape as aPad
* aPadOrientFilter: if true, make changes only on pads having the same orientation as aPad
* aPadLayerFilter: if true, make changes only on pads having the same layers as aPad
* aRedraw: if true: redraws the footprint
* aSaveForUndo: if true: create an entry in the Undo/Redo list
* (usually: true in Schematic editor, false in Module editor)
*/
void PCB_BASE_FRAME::GlobalChange_PadSettings( D_PAD* aPad,
bool aSameFootprints,
bool aPadShapeFilter,
bool aPadOrientFilter,
bool aPadLayerFilter,
bool aRedraw, bool aSaveForUndo )
{
if( aPad == NULL )
aPad = &GetDesignSettings().m_Pad_Master;
MODULE* module = aPad->GetParent();
if( module == NULL )
{
DisplayError( this, wxT( "Global_Import_Pad_Settings() Error: NULL module" ) );
return;
}
// Search and copy the name of library reference.
MODULE* Module_Ref = module;
double pad_orient = aPad->GetOrientation() - Module_Ref->GetOrientation();
// Prepare an undo list:
if( aSaveForUndo )
{
PICKED_ITEMS_LIST itemsList;
for( module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
bool saveMe = false;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Filters changes prohibited.
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
double currpad_orient = pad->GetOrientation() - module->GetOrientation();
if( aPadOrientFilter && ( currpad_orient != pad_orient ) )
continue;
if( aPadLayerFilter && pad->GetLayerSet() != aPad->GetLayerSet() )
continue;
saveMe = true;
}
if( saveMe )
{
ITEM_PICKER itemWrapper( module, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
}
SaveCopyInUndoList( itemsList, UR_CHANGED );
}
// Update the current module and same others modules if requested.
for( module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
// Erase module on screen
if( aRedraw )
{
module->SetFlags( DO_NOT_DRAW );
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
module->ClearFlags( DO_NOT_DRAW );
}
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Filters changes prohibited.
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
if( aPadOrientFilter && (pad->GetOrientation() - module->GetOrientation()) != pad_orient )
continue;
if( aPadLayerFilter )
{
if( pad->GetLayerSet() != aPad->GetLayerSet() )
continue;
else
m_Pcb->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK);
}
// Change characteristics:
pad->SetAttribute( aPad->GetAttribute() );
pad->SetShape( aPad->GetShape() );
pad->SetLayerSet( aPad->GetLayerSet() );
pad->SetSize( aPad->GetSize() );
pad->SetDelta( aPad->GetDelta() );
pad->SetOffset( aPad->GetOffset() );
pad->SetDrillSize( aPad->GetDrillSize() );
pad->SetDrillShape( aPad->GetDrillShape() );
pad->SetOrientation( pad_orient + module->GetOrientation() );
// copy also local mask margins, because these parameters usually depend on
// pad sizes and layers
pad->SetLocalSolderMaskMargin( aPad->GetLocalSolderMaskMargin() );
pad->SetLocalSolderPasteMargin( aPad->GetLocalSolderPasteMargin() );
pad->SetLocalSolderPasteMarginRatio( aPad->GetLocalSolderPasteMarginRatio() );
if( pad->GetShape() != PAD_TRAPEZOID )
{
pad->SetDelta( wxSize( 0, 0 ) );
}
if( pad->GetShape() == PAD_CIRCLE )
{
// Ensure pad size.y = pad size.x
int size = pad->GetSize().x;
pad->SetSize( wxSize( size, size ) );
}
switch( pad->GetAttribute() )
{
case PAD_SMD:
case PAD_CONN:
pad->SetDrillSize( wxSize( 0, 0 ) );
pad->SetOffset( wxPoint( 0, 0 ) );
break;
default:
break;
}
}
module->CalculateBoundingBox();
if( aRedraw )
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
}
OnModify();
}
void PCB_EDIT_FRAME::SaveCopyInUndoList( BOARD_ITEM* aItem,
UNDO_REDO_T aCommandType,
const wxPoint& aTransformPoint )
{
if( aItem == NULL ) // Nothing to save
return;
// For texts belonging to modules, we need to save state of the parent module
if( aItem->Type() == PCB_MODULE_TEXT_T )
{
aItem = aItem->GetParent();
wxASSERT( aItem->Type() == PCB_MODULE_T );
aCommandType = UR_CHANGED;
if( aItem == NULL )
return;
}
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
ITEM_PICKER itemWrapper( aItem, aCommandType );
switch( aCommandType )
{
case UR_CHANGED: // Create a copy of item
if( itemWrapper.GetLink() == NULL ) // When not null, the copy is already done
itemWrapper.SetLink( aItem->Clone() );
commandToUndo->PushItem( itemWrapper );
break;
case UR_NEW:
case UR_DELETED:
#ifdef USE_WX_OVERLAY
// Avoid to redraw when autoplacing
if( aItem->Type() == PCB_MODULE_T )
if( ((MODULE*)aItem)->GetFlags() & MODULE_to_PLACE )
break;
m_canvas->Refresh();
#endif
case UR_MOVED:
case UR_FLIPPED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
commandToUndo->PushItem( itemWrapper );
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), aCommandType );
wxMessageBox( msg );
}
break;
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else
{
delete commandToUndo;
}
}
void PCB_BASE_FRAME::ResetModuleTextSizes( const wxString & aFilter, bool aRef,
bool aValue, bool aOthers )
{
MODULE* module;
BOARD_ITEM* boardItem;
ITEM_PICKER itemWrapper( NULL, UR_CHANGED );
PICKED_ITEMS_LIST undoItemList;
unsigned int ii;
// Prepare undo list
for( module = GetBoard()->m_Modules; module; module = module->Next() )
{
itemWrapper.SetItem( module );
if( ! aFilter.IsEmpty() )
{
if( ! WildCompareString( aFilter, FROM_UTF8( module->GetFPID().Format().c_str() ),
false ) )
continue;
}
if( aRef )
{
TEXTE_MODULE *item = &module->Reference();
if( item->GetSize() != GetDesignSettings().m_ModuleTextSize ||
item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
{
undoItemList.PushItem( itemWrapper );
}
}
if( aValue )
{
TEXTE_MODULE *item = &module->Value();
if( item->GetSize() != GetDesignSettings().m_ModuleTextSize ||
item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
{
undoItemList.PushItem( itemWrapper );
}
}
if( aOthers )
{
// Go through all other module text fields
for( boardItem = module->GraphicalItems(); boardItem; boardItem = boardItem->Next() )
{
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE *item = static_cast<TEXTE_MODULE*>( boardItem );
if( item->GetSize() != GetDesignSettings().m_ModuleTextSize
|| item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
{
undoItemList.PushItem( itemWrapper );
}
}
}
}
}
// Exit if there's nothing to do
if( !undoItemList.GetCount() )
return;
SaveCopyInUndoList( undoItemList, UR_CHANGED );
// Apply changes to modules in the undo list
for( ii = 0; ii < undoItemList.GetCount(); ii++ )
{
module = (MODULE*) undoItemList.GetPickedItem( ii );
if( aRef )
{
module->Reference().SetThickness( GetDesignSettings().m_ModuleTextWidth );
module->Reference().SetSize( GetDesignSettings().m_ModuleTextSize );
}
if( aValue )
{
module->Value().SetThickness( GetDesignSettings().m_ModuleTextWidth );
module->Value().SetSize( GetDesignSettings().m_ModuleTextSize );
}
if( aOthers )
{
for( boardItem = module->GraphicalItems(); boardItem; boardItem = boardItem->Next() )
{
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE *item = static_cast<TEXTE_MODULE*>( boardItem );
item->SetThickness( GetDesignSettings().m_ModuleTextWidth );
item->SetSize( GetDesignSettings().m_ModuleTextSize );
}
}
}
}
OnModify();
}
int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent )
{
if( m_editModules && !m_board->m_Modules )
return 0;
DIALOG_DXF_IMPORT dlg( m_frame );
int dlgResult = dlg.ShowModal();
const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
if( dlgResult != wxID_OK || list.empty() )
return 0;
VECTOR2I cursorPos = m_controls->GetCursorPosition();
VECTOR2I delta = cursorPos - (*list.begin())->GetPosition();
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( m_view );
// Build the undo list & add items to the current view
std::list<BOARD_ITEM*>::const_iterator it, itEnd;
for( it = list.begin(), itEnd = list.end(); it != itEnd; ++it )
{
KICAD_T type = (*it)->Type();
assert( type == PCB_LINE_T || type == PCB_TEXT_T );
if( type == PCB_LINE_T || type == PCB_TEXT_T )
preview.Add( *it );
}
BOARD_ITEM* firstItem = static_cast<BOARD_ITEM*>( *preview.Begin() );
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
Activate();
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = m_controls->GetCursorPosition();
if( evt->IsMotion() )
{
delta = cursorPos - firstItem->GetPosition();
for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
static_cast<BOARD_ITEM*>( *it )->Move( wxPoint( delta.x, delta.y ) );
preview.ViewUpdate();
}
else if( evt->Category() == TC_COMMAND )
{
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
static_cast<BOARD_ITEM*>( *it )->Rotate( wxPoint( cursorPos.x, cursorPos.y ),
m_frame->GetRotationAngle() );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
static_cast<BOARD_ITEM*>( *it )->Flip( wxPoint( cursorPos.x, cursorPos.y ) );
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsCancel() || evt->IsActivate() )
{
preview.FreeItems();
break;
}
}
else if( evt->IsClick( BUT_LEFT ) )
{
// Place the drawing
if( m_editModules )
{
assert( m_board->m_Modules );
m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
m_board->m_Modules->SetLastEditTime();
for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
{
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( *it );
BOARD_ITEM* converted = NULL;
// Modules use different types for the same things,
// so we need to convert imported items to appropriate classes.
switch( item->Type() )
{
case PCB_TEXT_T:
converted = new TEXTE_MODULE( m_board->m_Modules );
// Copy coordinates, layer, etc.
*static_cast<TEXTE_PCB*>( converted ) = *static_cast<TEXTE_PCB*>( item );
static_cast<TEXTE_MODULE*>( converted )->SetLocalCoord();
break;
case PCB_LINE_T:
converted = new EDGE_MODULE( m_board->m_Modules );
// Copy coordinates, layer, etc.
*static_cast<DRAWSEGMENT*>( converted ) = *static_cast<DRAWSEGMENT*>( item );
static_cast<EDGE_MODULE*>( converted )->SetLocalCoord();
break;
default:
assert( false );
break;
}
delete item;
if( converted )
{
m_board->m_Modules->Add( converted );
m_view->Add( converted );
}
}
}
else // !m_editModules case
{
PICKED_ITEMS_LIST picklist;
for( KIGFX::VIEW_GROUP::iter it = preview.Begin(), end = preview.End(); it != end; ++it )
{
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( *it );
m_board->Add( item );
ITEM_PICKER itemWrapper( item, UR_NEW );
picklist.PushItem( itemWrapper );
m_view->Add( item );
}
m_frame->SaveCopyInUndoList( picklist, UR_NEW );
}
m_frame->OnModify();
break;
}
}
preview.Clear();
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
return 0;
}
void BOARD_COMMIT::Push( const wxString& aMessage )
{
// Objects potentially interested in changes:
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) m_toolMgr->GetEditFrame();
RN_DATA* ratsnest = board->GetRatsnest();
std::set<EDA_ITEM*> savedModules;
if( Empty() )
return;
for( COMMIT_LINE& ent : m_changes )
{
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
BOARD_ITEM* boardItem = static_cast<BOARD_ITEM*>( ent.m_item );
// Module items need to be saved in the undo buffer before modification
if( m_editModules )
{
// Be sure that we are storing a module
if( ent.m_item->Type() != PCB_MODULE_T )
ent.m_item = ent.m_item->GetParent();
// We have not saved the module yet, so let's create an entry
if( savedModules.count( ent.m_item ) == 0 )
{
if( !ent.m_copy )
{
assert( changeType != CHT_MODIFY ); // too late to make a copy..
ent.m_copy = ent.m_item->Clone();
}
assert( ent.m_item->Type() == PCB_MODULE_T );
assert( ent.m_copy->Type() == PCB_MODULE_T );
ITEM_PICKER itemWrapper( ent.m_item, UR_CHANGED );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
frame->SaveCopyInUndoList( undoList, UR_CHANGED );
savedModules.insert( ent.m_item );
static_cast<MODULE*>( ent.m_item )->SetLastEditTime();
}
}
switch( changeType )
{
case CHT_ADD:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_NEW ) );
if( !( changeFlags & CHT_DONE ) )
board->Add( boardItem );
//ratsnest->Add( boardItem ); // TODO currently done by BOARD::Add()
if( boardItem->Type() == PCB_MODULE_T )
{
MODULE* mod = static_cast<MODULE*>( boardItem );
mod->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
}
else
{
// modules inside modules are not supported yet
assert( boardItem->Type() != PCB_MODULE_T );
if( !( changeFlags & CHT_DONE ) )
board->m_Modules->Add( boardItem );
}
view->Add( boardItem );
break;
}
case CHT_REMOVE:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
}
switch( boardItem->Type() )
{
// Module items
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
case PCB_MODULE_TEXT_T:
{
// Do not allow footprint text removal when not editing a module
if( !m_editModules )
break;
bool remove = true;
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );
switch( text->GetType() )
{
case TEXTE_MODULE::TEXT_is_REFERENCE:
//DisplayError( frame, _( "Cannot delete component reference." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_VALUE:
//DisplayError( frame, _( "Cannot delete component value." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_DIVERS: // suppress warnings
break;
default:
assert( false );
break;
}
}
if( remove )
{
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
{
MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
assert( module && module->Type() == PCB_MODULE_T );
module->Delete( boardItem );
}
board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
}
break;
}
// Board items
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
case PCB_ZONE_AREA_T:
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
board->Remove( boardItem );
//ratsnest->Remove( boardItem ); // currently done by BOARD::Remove()
break;
case PCB_MODULE_T:
{
// There are no modules inside a module yet
assert( !m_editModules );
MODULE* module = static_cast<MODULE*>( boardItem );
module->ClearFlags();
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( module );
if( !( changeFlags & CHT_DONE ) )
board->Remove( module );
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
default: // other types do not need to (or should not) be handled
assert( false );
break;
}
break;
}
case CHT_MODIFY:
{
if( !m_editModules )
{
ITEM_PICKER itemWrapper( boardItem, UR_CHANGED );
assert( ent.m_copy );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
}
boardItem->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
ratsnest->Update( boardItem );
break;
}
default:
assert( false );
break;
}
}
if( !m_editModules )
frame->SaveCopyInUndoList( undoList, UR_UNSPECIFIED );
frame->OnModify();
ratsnest->Recalculate();
clear();
}
/*
* Function DoPushPadProperties
* Function to change pad properties for the given footprint or all identical footprints
* aPad is the pattern. The given footprint is the parent of this pad
* aSameFootprints: if true, make changes on all identical footprints
* aPadShapeFilter: if true, make changes only on pads having the same shape as aPad
* aPadOrientFilter: if true, make changes only on pads having the same orientation as aPad
* aPadLayerFilter: if true, make changes only on pads having the same layers as aPad
* aSaveForUndo: if true: create an entry in the Undo/Redo list
* (usually: true in Schematic editor, false in Module editor)
*/
void PCB_BASE_FRAME::DoPushPadProperties( D_PAD* aPad, bool aSameFootprints,
bool aPadShapeFilter,
bool aPadOrientFilter,
bool aPadLayerFilter,
bool aSaveForUndo )
{
MODULE* Module_Ref = aPad->GetParent();
double pad_orient = aPad->GetOrientation() - Module_Ref->GetOrientation();
// Prepare an undo list:
if( aSaveForUndo )
{
PICKED_ITEMS_LIST itemsList;
if( aSameFootprints )
{
for( MODULE* module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( module->GetFPID() == Module_Ref->GetFPID() )
{
ITEM_PICKER itemWrapper( module, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
}
}
else
{
ITEM_PICKER itemWrapper( Module_Ref, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
SaveCopyInUndoList( itemsList, UR_CHANGED );
}
// Update the current module and same others modules if requested.
for( MODULE* module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
// Erase module on screen
module->SetFlags( DO_NOT_DRAW );
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
module->ClearFlags( DO_NOT_DRAW );
for( D_PAD* pad = module->PadsList(); pad; pad = pad->Next() )
{
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
double currpad_orient = pad->GetOrientation() - module->GetOrientation();
if( aPadOrientFilter && ( currpad_orient != pad_orient ) )
continue;
if( aPadLayerFilter && ( pad->GetLayerSet() != aPad->GetLayerSet() ) )
continue;
// Do not copy pad to itself, it can create issues with custom pad primitives.
if( pad == aPad )
continue;
pad->ImportSettingsFromMaster( *aPad );
}
module->CalculateBoundingBox();
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
}
OnModify();
}