static void test_encoder_factory(uint32_t max_symbols, uint32_t max_symbol_size,
int32_t codec, int32_t finite_field)
{
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
// Test the max_* properties
EXPECT_EQ(max_symbols, kodoc_factory_max_symbols(encoder_factory));
EXPECT_EQ(max_symbol_size, kodoc_factory_max_symbol_size(encoder_factory));
EXPECT_EQ(max_symbol_size * max_symbols,
kodoc_factory_max_block_size(encoder_factory));
EXPECT_GT(kodoc_factory_max_payload_size(encoder_factory), max_symbol_size);
// Build an encoder with the default settings
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
EXPECT_EQ(max_symbols, kodoc_symbols(encoder));
EXPECT_EQ(max_symbol_size, kodoc_symbol_size(encoder));
// Lower the number of symbols and the symbol_size
uint32_t new_symbols = max_symbols / 2;
kodoc_factory_set_symbols(encoder_factory, new_symbols);
uint32_t new_symbol_size = max_symbol_size - 4;
kodoc_factory_set_symbol_size(encoder_factory, new_symbol_size);
// Test that the max_* properties are not changed
EXPECT_EQ(max_symbols, kodoc_factory_max_symbols(encoder_factory));
EXPECT_EQ(max_symbol_size, kodoc_factory_max_symbol_size(encoder_factory));
EXPECT_EQ(max_symbol_size * max_symbols,
kodoc_factory_max_block_size(encoder_factory));
EXPECT_GT(kodoc_factory_max_payload_size(encoder_factory), max_symbol_size);
// Build an encoder with the changed settings
kodoc_coder_t encoder2 = kodoc_factory_build_coder(encoder_factory);
EXPECT_EQ(new_symbols, kodoc_symbols(encoder2));
EXPECT_EQ(new_symbol_size, kodoc_symbol_size(encoder2));
kodoc_delete_coder(encoder);
kodoc_delete_coder(encoder2);
kodoc_delete_factory(encoder_factory);
}
static void test_decoder(uint32_t symbols, uint32_t symbol_size,
int32_t codec, int32_t finite_field)
{
kodoc_factory_t decoder_factory = kodoc_new_decoder_factory(
codec, finite_field, symbols, symbol_size);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// Coder methods
test_coder(decoder, symbols, symbol_size, codec);
// Decoder methods
// Some codecs do not provide write_payload, i.e. recoding
if (codec == kodoc_seed || codec == kodoc_sparse_seed ||
codec == kodoc_fulcrum || codec == kodoc_reed_solomon)
{
EXPECT_TRUE(kodoc_has_write_payload(decoder) == 0);
}
else
{
EXPECT_TRUE(kodoc_has_write_payload(decoder) != 0);
}
EXPECT_EQ(0U, kodoc_symbols_uncoded(decoder));
EXPECT_EQ(0U, kodoc_symbols_partially_decoded(decoder));
if (codec == kodoc_on_the_fly ||
codec == kodoc_sliding_window)
{
EXPECT_TRUE(kodoc_has_partial_decoding_interface(decoder) != 0);
}
else if (codec == kodoc_full_vector)
{
EXPECT_TRUE(kodoc_has_partial_decoding_interface(decoder) == 0);
}
kodoc_delete_coder(decoder);
kodoc_delete_factory(decoder_factory);
}
inline void test_decoder_symbol_status_api(int32_t decoder_type)
{
uint32_t symbols = 4;
uint32_t symbol_size = 40;
kodoc_factory_t decoder_factory = kodoc_new_decoder_factory(
decoder_type, kodoc_binary8, symbols, symbol_size);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
std::vector<uint8_t> data_out(kodoc_block_size(decoder), '\0');
kodoc_set_mutable_symbols(decoder, data_out.data(), data_out.size());
std::vector<uint8_t> symbol(kodoc_symbol_size(decoder));
std::vector<uint8_t> coefficients(kodoc_coefficient_vector_size(decoder));
coefficients = {1, 0, 0, 0};
kodoc_read_symbol(decoder, symbol.data(), coefficients.data());
EXPECT_EQ(0U, kodoc_symbols_uncoded(decoder));
kodoc_update_symbol_status(decoder);
EXPECT_EQ(1U, kodoc_symbols_uncoded(decoder));
kodoc_set_status_updater_on(decoder);
coefficients = {0, 1, 0, 0};
kodoc_read_symbol(decoder, symbol.data(), coefficients.data());
EXPECT_EQ(2U, kodoc_symbols_uncoded(decoder));
kodoc_set_status_updater_off(decoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(decoder_factory);
}
int main()
{
// Seed the random number generator to produce different data every time
srand(time(NULL));
// Set the number of symbols and the symbol size
uint32_t max_symbols = 10;
uint32_t max_symbol_size = 100;
// Here we select the codec we wish to use
int32_t codec = kodoc_reed_solomon;
// Here we select the finite field to use.
// For the Reed-Solomon codec, we need to choose kodoc_binary8
int32_t finite_field = kodoc_binary8;
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// Allocate some storage for a "payload". The payload is what we would
// eventually send over a network.
uint32_t bytes_used;
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
// Allocate input and output data buffers
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
// Fill the input buffer with random data
uint32_t i = 0;
for(; i < block_size; ++i)
data_in[i] = rand() % 256;
// Assign the data buffers to the encoder and decoder
kodoc_set_const_symbols(encoder, data_in, block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
// Install a custom trace function for the decoder
kodoc_set_trace_callback(decoder, trace_callback, NULL);
uint32_t lost_payloads = 0;
uint32_t received_payloads = 0;
while (!kodoc_is_complete(decoder))
{
// The encoder will use a certain amount of bytes of the payload buffer
bytes_used = kodoc_write_payload(encoder, payload);
printf("Payload generated by encoder, bytes used = %d\n", bytes_used);
// Simulate a channel with a 50% loss rate
if (rand() % 2)
{
lost_payloads++;
printf("Symbol lost on channel\n\n");
continue;
}
// Pass the generated packet to the decoder
received_payloads++;
kodoc_read_payload(decoder, payload);
printf("Payload processed by decoder, current rank = %d\n\n",
kodoc_rank(decoder));
}
printf("Number of lost payloads: %d\n", lost_payloads);
printf("Number of received payloads: %d\n", received_payloads);
// Check that we properly decoded the data
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
// Free the allocated buffers and the kodo objects
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
inline void run_test_basic_api(int32_t encoder_type, int32_t decoder_type,
int32_t finite_field, uint32_t symbols,
uint32_t symbol_size)
{
kodoc_factory_t encoder_factory = kodoc_new_encoder_factory(
encoder_type, finite_field, symbols, symbol_size);
kodoc_factory_t decoder_factory = kodoc_new_decoder_factory(
decoder_type, finite_field, symbols, symbol_size);
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
EXPECT_EQ(symbols, kodoc_factory_max_symbols(encoder_factory));
EXPECT_EQ(symbol_size, kodoc_factory_max_symbol_size(encoder_factory));
EXPECT_EQ(symbols, kodoc_symbols(encoder));
EXPECT_EQ(symbol_size, kodoc_symbol_size(encoder));
EXPECT_EQ(symbols, kodoc_factory_max_symbols(decoder_factory));
EXPECT_EQ(symbol_size, kodoc_factory_max_symbol_size(decoder_factory));
EXPECT_EQ(symbols, kodoc_symbols(decoder));
EXPECT_EQ(symbol_size, kodoc_symbol_size(decoder));
EXPECT_EQ(symbols * symbol_size, kodoc_block_size(encoder));
EXPECT_EQ(symbols * symbol_size, kodoc_block_size(decoder));
EXPECT_TRUE(kodoc_factory_max_payload_size(encoder_factory) >=
kodoc_payload_size(encoder));
EXPECT_TRUE(kodoc_factory_max_payload_size(decoder_factory) >=
kodoc_payload_size(decoder));
EXPECT_EQ(kodoc_factory_max_payload_size(encoder_factory),
kodoc_factory_max_payload_size(decoder_factory));
if (encoder_type == kodoc_sparse_full_vector ||
encoder_type == kodoc_sparse_seed)
{
// Set the coding vector density on the encoder
kodoc_set_density(encoder, 0.2);
EXPECT_EQ(0.2, kodoc_density(encoder));
}
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
uint8_t** input_symbols = NULL;
uint8_t** output_symbols = NULL;
// Allocate symbols in non-contiguous buffers
input_symbols = (uint8_t**) malloc(symbols * sizeof(uint8_t*));
output_symbols = (uint8_t**) malloc(symbols * sizeof(uint8_t*));
for (uint32_t i = 0; i < symbols; ++i)
{
// Create the individual symbols for the encoder
input_symbols[i] = (uint8_t*) malloc(symbol_size);
// Randomize input data
for (uint32_t j = 0; j < symbol_size; ++j)
input_symbols[i][j] = rand() % 256;
// Store the symbol pointer in the encoder
kodoc_set_const_symbol(encoder, i, input_symbols[i], symbol_size);
// Create the output symbol buffers for the decoder
output_symbols[i] = (uint8_t*) malloc(symbol_size);
// Specify the output buffers used for decoding
kodoc_set_mutable_symbol(decoder, i, output_symbols[i], symbol_size);
}
if (kodoc_has_symbol_decoding_status_updater_interface(decoder))
{
EXPECT_FALSE(kodoc_is_status_updater_enabled(decoder));
kodoc_set_status_updater_on(decoder);
EXPECT_TRUE(kodoc_is_status_updater_enabled(decoder));
kodoc_set_status_updater_off(decoder);
EXPECT_FALSE(kodoc_is_status_updater_enabled(decoder));
}
else
{
EXPECT_TRUE(
decoder_type == kodoc_fulcrum ||
decoder_type == kodoc_reed_solomon
);
}
EXPECT_TRUE(kodoc_is_complete(decoder) == 0);
while (!kodoc_is_complete(decoder))
{
kodoc_write_payload(encoder, payload);
kodoc_read_payload(decoder, payload);
}
EXPECT_TRUE(kodoc_is_complete(decoder) != 0);
EXPECT_EQ(symbols, kodoc_rank(decoder));
EXPECT_EQ(symbols, kodoc_symbols_uncoded(decoder));
EXPECT_EQ(0U, kodoc_symbols_partially_decoded(decoder));
EXPECT_EQ(0U, kodoc_symbols_missing(decoder));
assert(input_symbols);
assert(output_symbols);
// Compare the input and output symbols one-by-one
for (uint32_t i = 0; i < symbols; ++i)
{
EXPECT_EQ(memcmp(input_symbols[i], output_symbols[i], symbol_size), 0);
free(input_symbols[i]);
free(output_symbols[i]);
}
free(input_symbols);
free(output_symbols);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
}
int main()
{
// Seed random number generator to produce different results every time
srand(time(NULL));
// Set the number of symbols (i.e. the generation size in RLNC
// terminology) and the size of a symbol in bytes
uint8_t max_symbols = 10;
uint8_t max_symbol_size = 100;
int32_t codec = kodoc_full_vector;
int32_t finite_field = kodoc_binary8;
// In the following we will make an encoder/decoder factory.
// The factories are used to build actual encoders/decoder
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
// If we wanted to build an encoder or decoder with a smaller number of
// symbols or a different symbol size, then this can be adjusted using the
// following functions:
// kodoc_factory_set_symbols(...)
// kodoc_factory_set_symbol_size(...)
// We cannot exceed the maximum values which was used when building
// the factory.
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// Allocate some storage for a "payload" the payload is what we would
// eventually send over a network
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
// Allocate some data to encode. In this case we make a buffer
// with the same size as the encoder's block size (the max.
// amount a single encoder can encode)
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
// Just for fun - fill the data with random data
uint32_t i = 0;
for (; i < block_size; ++i)
{
data_in[i] = rand() % 256;
}
kodoc_set_const_symbols(encoder, data_in, block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
printf("Starting encoding / decoding\n");
while (!kodoc_is_complete(decoder))
{
// If the chosen codec stack supports systematic coding
if (kodoc_has_systematic_interface(encoder))
{
// With 50% probability toggle systematic
if ((rand() % 2) == 0)
{
if (kodoc_is_systematic_on(encoder))
{
printf("Turning systematic OFF\n");
kodoc_set_systematic_off(encoder);
}
else
{
printf("Turn systematic ON\n");
kodoc_set_systematic_on(encoder);
}
}
}
// Encode a packet into the payload buffer
kodoc_write_payload(encoder, payload);
if ((rand() % 2) == 0)
{
printf("Drop packet\n");
continue;
}
// Pass that packet to the decoder
kodoc_read_payload(decoder, payload);
printf("Rank of decoder %d\n", kodoc_rank(decoder));
// Symbols that were received in the systematic phase correspond
// to the original source symbols and are therefore marked as
// decoded
printf("Symbols decoded %d\n", kodoc_symbols_uncoded(decoder));
}
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
free(data_in);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
int main()
{
// Seed the random number generator to produce different data every time
srand(time(NULL));
// Set the number of symbols (i.e. the generation size in RLNC
// terminology) and the size of a symbol in bytes
uint32_t max_symbols = 10;
uint32_t max_symbol_size = 100;
// Here we select the codec we wish to use
int32_t codec = kodoc_full_vector;
// Here we select the finite field to use.
// Some common choices are: kodoc_binary, kodoc_binary4, kodoc_binary8
int32_t finite_field = kodoc_binary;
// First, we create an encoder & decoder factory.
// The factories are used to build actual encoders/decoders
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
// If we wanted to build an encoder or decoder with a smaller number of
// symbols or a different symbol size, then this can be adjusted using the
// following functions:
// kodoc_factory_set_symbols(...) and kodoc_factory_set_symbol_size(...)
// We can however not exceed the maximum values that were used when
// creating the factory.
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
uint32_t bytes_used;
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
uint32_t i = 0;
for(; i < block_size; ++i)
data_in[i] = rand() % 256;
kodoc_set_const_symbols(encoder, data_in, block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
// Most of the network coding algorithms supports a mode of operation
// which is known as systematic coding. This basically means that
// initially all symbols are sent once un-coded. The rational behind this
// is that if no errors occur during the transmission we will not have
// performed any unnecessary coding operations. An encoder will exit the
// systematic phase automatically once all symbols have been sent un-coded
// once.
//
// With Kodo we can ask an encoder whether it supports systematic encoding
// or not using the following functions:
if (kodoc_is_systematic_on(encoder))
{
printf("Systematic encoding enabled\n");
}
else
{
printf("Systematic encoding disabled\n");
}
// If we do not wish to use systematic encoding, but to do full coding
// from the beginning we can turn systematic coding off using the following
// API:
//
// if (kodoc_has_set_systematic_off(encoder))
// {
// kodoc_set_systematic_off(encoder);
// }
// Install a custom trace function for the decoder
kodoc_set_trace_callback(decoder, trace_callback, NULL);
while (!kodoc_is_complete(decoder))
{
// The encoder will use a certain amount of bytes of the payload
// buffer. It will never use more than payload_size, but it might
// use less.
bytes_used = kodoc_write_payload(encoder, payload);
printf("Payload generated by encoder, rank = %d, bytes used = %d\n",
kodoc_rank(encoder), bytes_used);
// Pass the generated packet to the decoder
kodoc_read_payload(decoder, payload);
printf("Payload processed by decoder, current rank = %d\n",
kodoc_rank(decoder));
}
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
int main()
{
// Seed random number generator to produce different results every time
srand(time(NULL));
// Set the number of symbols (i.e. the generation size in RLNC
// terminology) and the size of a symbol in bytes
uint8_t max_symbols = 6;
uint8_t max_symbol_size = 100;
int32_t codec = kodoc_sliding_window;
int32_t finite_field = kodoc_binary8;
// In the following we will make an encoder/decoder factory.
// The factories are used to build actual encoders/decoders
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
// If we wanted to build an encoder or decoder with a smaller number of
// symbols or a different symbol size, then this can be adjusted using the
// following functions:
// kodoc_factory_set_symbols(...)
// kodoc_factory_set_symbol_size(...)
// We cannot exceed the maximum values which was used when building
// the factory.
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// Allocate some storage for a "payload" the payload is what we would
// eventually send over a network
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
// Allocate some data to encode. In this case we make a buffer
// with the same size as the encoder's block size (the max.
// amount a single encoder can encode)
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
uint8_t feedback_size = (uint8_t) kodoc_feedback_size(encoder);
uint8_t* feedback = (uint8_t*) malloc(feedback_size);
uint32_t i = 0;
//Just for fun - fill data_in with random data
for (; i < block_size; ++i)
{
data_in[i] = rand() % 256;
}
// Install a custom trace function for the decoder
kodoc_set_trace_callback(decoder, trace_callback, NULL);
while (!kodoc_is_complete(decoder))
{
// Insert a new symbol until the encoder is full
if (kodoc_rank(encoder) < max_symbols)
{
uint32_t rank = kodoc_rank(encoder);
uint8_t* symbol = data_in + (rank * max_symbol_size);
kodoc_set_const_symbol(encoder, rank, symbol, max_symbol_size);
printf("Symbol %d added to the encoder\n", rank);
}
// Only send packets if the encoder has more data than the decoder
if (kodoc_rank(encoder) == kodoc_rank(decoder))
{
continue;
}
// Write an encoded packet into the payload buffer
kodoc_write_payload(encoder, payload);
printf("Encoded packet generated\n");
// Here we simulate that we are losing 50% of the packets
if (rand() % 2)
{
printf("Packet dropped on channel\n\n");
continue;
}
printf("Decoder received packet\n");
// Packet got through - pass that packet to the decoder
kodoc_read_payload(decoder, payload);
printf("Encoder rank = %d\n", kodoc_rank(encoder));
printf("Decoder rank = %d\n", kodoc_rank(decoder));
printf("Decoder uncoded = %d\n", kodoc_symbols_uncoded(decoder));
printf("Decoder partially decoded = %d\n",
kodoc_symbols_partially_decoded(decoder));
// Transmit the feedback
kodoc_write_feedback(decoder, feedback);
// Note that the feedback packets can also be lost in a real network,
// but here we deliver all of them for the sake of simplicity
printf("Received feedback from decoder\n\n");
kodoc_read_feedback(encoder, feedback);
}
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
free(data_in);
free(data_out);
free(payload);
free(feedback);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
JNIEXPORT
jboolean JNICALL Java_com_steinwurf_dummy_1android_MainActivity_runKodo(
JNIEnv* env, jobject thiz)
{
// Seed random number generator to produce different results every time
srand(time(NULL));
// Set the number of symbols (i.e. the generation size in RLNC
// terminology) and the size of a symbol in bytes
uint32_t max_symbols = 42;
uint32_t max_symbol_size = 160;
// Select the coding to use
int32_t code_type = kodoc_full_vector;
// Select the finite field
int32_t finite_field = kodoc_binary;
// Create the factories
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(code_type, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(code_type, finite_field,
max_symbols, max_symbol_size);
// Create the coders
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// Generate the data
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint32_t i = 0;
for (; i < block_size; ++i)
data_in[i] = rand() % 256;
// Set the date to encode
kodoc_set_const_symbols(encoder, data_in, block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
// Run the decoding
while (!kodoc_is_complete(decoder))
{
kodoc_write_payload(encoder, payload);
kodoc_read_payload(decoder, payload);
}
// Check if the decoding was successful
bool success = false;
if (memcmp(data_in, data_out, block_size) == 0)
success = true;
// Clean up
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return success;
}
void test_sliding_window(uint32_t max_symbols, uint32_t max_symbol_size,
int32_t finite_field)
{
kodoc_factory_t encoder_factory = kodoc_new_encoder_factory(
kodoc_sliding_window, finite_field, max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory = kodoc_new_decoder_factory(
kodoc_sliding_window, finite_field, max_symbols, max_symbol_size);
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
EXPECT_EQ(max_symbols,kodoc_factory_max_symbols(encoder_factory));
EXPECT_EQ(max_symbol_size,kodoc_factory_max_symbol_size(encoder_factory));
EXPECT_EQ(max_symbols, kodoc_symbols(encoder));
EXPECT_EQ(max_symbol_size,kodoc_symbol_size(encoder));
EXPECT_EQ(max_symbols, kodoc_factory_max_symbols(decoder_factory));
EXPECT_EQ(max_symbol_size, kodoc_factory_max_symbol_size(decoder_factory));
EXPECT_EQ(max_symbols, kodoc_symbols(decoder));
EXPECT_EQ(max_symbol_size, kodoc_symbol_size(decoder));
EXPECT_EQ(max_symbols * max_symbol_size, kodoc_block_size(encoder));
EXPECT_EQ(max_symbols * max_symbol_size, kodoc_block_size(decoder));
EXPECT_TRUE(kodoc_factory_max_payload_size(encoder_factory) >=
kodoc_payload_size(encoder));
EXPECT_TRUE(kodoc_factory_max_payload_size(decoder_factory) >=
kodoc_payload_size(decoder));
EXPECT_EQ(kodoc_factory_max_payload_size(encoder_factory),
kodoc_factory_max_payload_size(decoder_factory));
uint32_t feedback_size = 0;
EXPECT_EQ(kodoc_feedback_size(encoder), kodoc_feedback_size(decoder));
feedback_size = kodoc_feedback_size(encoder);
EXPECT_TRUE(feedback_size > 0);
// Allocate some storage for a "payload" the payload is what we would
// eventually send over a network
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
uint8_t* feedback = (uint8_t*) malloc(feedback_size);
// Allocate some data to encode. In this case we make a buffer
// with the same size as the encoder's block size (the max.
// amount a single encoder can encode)
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
// Just for fun - fill the data with random data
for (uint32_t i = 0; i < block_size; ++i)
data_in[i] = rand() % 256;
// Install a custom trace function for the encoder and decoder
kodoc_set_trace_callback(encoder, encoder_trace_callback, NULL);
kodoc_set_trace_callback(decoder, decoder_trace_callback, NULL);
// Assign the data buffer to the encoder so that we may start
// to produce encoded symbols from it
kodoc_set_const_symbols(encoder, data_in, block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
EXPECT_TRUE(kodoc_is_complete(decoder) == 0);
while (!kodoc_is_complete(decoder))
{
// Encode the packet into the payload buffer
uint32_t payload_used = kodoc_write_payload(encoder, payload);
EXPECT_TRUE(payload_used <= kodoc_payload_size(encoder));
// Pass that packet to the decoder
kodoc_read_payload(decoder, payload);
// All payloads must be innovative due to the perfect feedback
EXPECT_TRUE(kodoc_is_partially_complete(decoder) != 0);
kodoc_write_feedback(decoder, feedback);
kodoc_read_feedback(encoder, feedback);
}
EXPECT_TRUE(kodoc_is_complete(decoder) != 0);
// Check if we properly decoded the data
EXPECT_EQ(memcmp(data_in, data_out, block_size), 0);
// Check that the trace functions were called at least once
EXPECT_GT(encoder_trace_called, 0U);
EXPECT_GT(decoder_trace_called, 0U);
free(data_in);
free(data_out);
free(payload);
free(feedback);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
}
int main(int argc, char* argv[])
{
// Variables needed for the network / socket usage
int32_t socket_descriptor = 0;
int32_t return_code = 0;
int32_t bytes_received = 0;
socklen_t remote_address_size;
struct sockaddr_in remote_address;
struct sockaddr_in local_address;
// Variables needed for the coding
uint32_t max_symbols = 32;
uint32_t max_symbol_size = 160;
uint32_t symbols = 0;
int32_t codec = kodoc_on_the_fly;
int32_t finite_field = kodoc_binary8;
kodoc_factory_t decoder_factory = 0;
kodoc_coder_t decoder = 0;
// The buffer used to receive incoming packets
uint32_t payload_size = 0;
uint8_t* payload = 0;
// Keeps track of which symbols have been decoded
uint8_t* decoded = (uint8_t*) malloc(sizeof(uint8_t) * max_symbols);
// Initialize winsock if on Windows
#ifdef _WIN32
WORD versionWanted = MAKEWORD(1, 1);
WSADATA wsaData;
return_code = WSAStartup(versionWanted, &wsaData);
if (return_code != 0)
{
// Tell the user that we could not find a usable
// Winsock DLL.
printf("WSAStartup failed with error: %d\n", return_code);
exit(1);
}
#endif
// Initialize global variables
rx_packets = 0;
if (argc < 3)
{
printf("usage : %s <port> <symbols>\n", argv[0]);
exit(1);
}
// Socket creation
socket_descriptor = socket(AF_INET, SOCK_DGRAM, 0);
if (socket_descriptor < 0)
{
printf("%s: cannot open socket \n", argv[0]);
exit(1);
}
// Bind local server port
local_address.sin_family = AF_INET;
local_address.sin_addr.s_addr = htonl(INADDR_ANY);
local_address.sin_port = htons(atoi(argv[1]));
return_code = bind(socket_descriptor, (struct sockaddr*) &local_address,
sizeof(local_address));
if (return_code < 0)
{
printf("%s: cannot bind port number %d \n", argv[0], atoi(argv[1]));
exit(1);
}
// Install signal handler
signal(SIGINT, exit_on_sigint);
// Initialize the factory with the chosen symbols and symbol size
symbols = atoi(argv[2]);
if (symbols > max_symbols)
{
printf("%s: number of symbols cannot be higher than %d \n",
argv[0], max_symbols);
exit(1);
}
// Create the encoder factory
decoder_factory = kodoc_new_decoder_factory(
codec, finite_field, max_symbols, max_symbol_size);
kodoc_factory_set_symbols(decoder_factory, symbols);
decoder = kodoc_factory_build_coder(decoder_factory);
// Create the buffer needed for the payload
payload_size = kodoc_payload_size(decoder);
payload = (uint8_t*) malloc(payload_size);
uint32_t block_size = kodoc_block_size(decoder);
uint8_t* data_out = (uint8_t*) malloc(block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
// Zero initialize the decoded array */
memset(decoded, '\0', sizeof(uint8_t) * max_symbols);
printf("%s: waiting for data on UDP port %u\n", argv[0], atoi(argv[1]));
// Receiver loop
while (!kodoc_is_complete(decoder))
{
// Receive message
remote_address_size = sizeof(remote_address);
bytes_received = recvfrom(
socket_descriptor, payload, payload_size, 0,
(struct sockaddr*) &remote_address, &remote_address_size);
if (bytes_received < 0)
{
printf("%s: recvfrom error %d\n", argv[0], bytes_received);
fflush(stdout);
continue;
}
// Print received message
printf("%s: UDP packet from %s:%u : %d\n",
argv[0],inet_ntoa(remote_address.sin_addr),
ntohs(remote_address.sin_port), bytes_received);
++rx_packets;
// Packet got through - pass that packet to the decoder
kodoc_read_payload(decoder, payload);
if (kodoc_has_partial_decoding_interface(decoder) &&
kodoc_is_partially_complete(decoder))
{
uint32_t i = 0;
for (; i < kodoc_symbols(decoder); ++i)
{
if (!kodoc_is_symbol_uncoded(decoder, i))
continue;
if (!decoded[i])
{
// Update that this symbol now has been decoded,
// in a real application we could copy out the symbol
// using the kodoc_copy_from_symbol(..) or use the data_out
// directly.
printf("Symbol %d was decoded\n", i);
decoded[i] = 1;
}
}
}
}
printf("Data decoded!\n");
// Cleanup
free(decoded);
free(payload);
kodoc_delete_coder(decoder);
kodoc_delete_factory(decoder_factory);
return 0;
}
int main()
{
// Seed random number generator to produce different results every time
srand(time(NULL));
// Set the number of symbols (i.e. the generation size in RLNC
// terminology) and the size of a symbol in bytes
uint32_t max_symbols = 3;
uint32_t max_symbol_size = 16;
int32_t codec = kodoc_full_vector;
int32_t finite_field = kodoc_binary8;
// In the following we will make an encoder/decoder factory.
// The factories are used to build actual encoders/decoder
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
// If we wanted to build an encoder or decoder with a smaller number of
// symbols or a different symbol size, then this can be adjusted using the
// following functions:
// kodoc_factory_set_symbols(...)
// kodoc_factory_set_symbol_size(...)
// We cannot exceed the maximum values which was used when building
// the factory.
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// Allocate some storage for a "payload" the payload is what we would
// eventually send over a network
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
// Allocate some data to encode. In this case we make a buffer
// with the same size as the encoder's block size (the max.
// amount a single encoder can encode)
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
// Just for fun - fill the data with random data
uint32_t i = 0;
for (; i < block_size; ++i)
{
data_in[i] = rand() % 256;
}
// Install the stdout trace function for the encoder (everything will
// be printed to stdout without filtering)
kodoc_set_trace_stdout(encoder);
// Set a custom zone prefix for the encoder (this helps to differentiate
// the trace output of the encoder and the decoder)
kodoc_set_zone_prefix(encoder, "Encoder");
// Install a custom trace function for the decoder (we can process and
// filter the data in our trace callback)
kodoc_set_trace_callback(decoder, trace_callback, NULL);
// Set a custom zone prefix for the decoder
kodoc_set_zone_prefix(decoder, "Decoder");
kodoc_set_const_symbols(encoder, data_in, block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
while (!kodoc_is_complete(decoder))
{
kodoc_write_payload(encoder, payload);
if ((rand() % 2) == 0)
{
continue;
}
kodoc_read_payload(decoder, payload);
}
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
int main()
{
// Seed the random number generator to produce different data every time
srand(time(NULL));
// Set the number of symbols and the symbol size
uint32_t max_symbols = 10;
uint32_t max_symbol_size = 100;
// Here we select the codec we wish to use
int32_t codec = kodoc_perpetual;
// Here we select the finite field to use.
// kodoc_binary8 is common choice for the perpetual codec
int32_t finite_field = kodoc_binary8;
// First, we create an encoder & decoder factory.
// The factories are used to build actual encoders/decoders
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// The perpetual encoder supports three operation modes:
//
// 1) Random pivot mode (default):
// The pivot element is drawn at random
// 2) Pseudo-systematic
// Pivot elements are generated with indices 0,1,2,...,n
// After that, the pivots are drawn at random.
// 3) Pre-charging
// For the first "width" symbols, the pivot index is 0. After that,
/// the pseudo-systematic mode is used. Finally, pivots are drawn at
/// random. The resulting indices: 0(width times),1,2,...,n
//
// The operation mode is set with the following API.
// Note that if both pre-charging and pseudo-systematic is enabled,
// pre-charging takes precedence.
// Enable the pseudo-systematic operation mode - faster
kodoc_set_pseudo_systematic(encoder, 1);
// Enable the pre-charing operation mode - even faster
//kodoc_set_pre_charging(encoder, 1);
printf("Pseudo-systematic flag: %d\n", kodoc_pseudo_systematic(encoder));
printf("Pre-charging flag: %d\n", kodoc_pre_charging(encoder));
// The width of the perpetual code can be set either as a number of symbols
// using kodoc_set_width(), or as a ratio of the number of symbols using
// kodoc_set_width_ratio().
//
// The default width is set to 10% of the number of symbols.
printf("The width ratio defaults to: %0.2f"
" (therefore the calculated width is %d)\n",
kodoc_width_ratio(encoder), kodoc_width(encoder));
/// When modifying the width, the width ratio will change as well
kodoc_set_width(encoder, 4);
printf("The width was set to: %d "
" (therefore the calculated width ratio is %0.2f)\n",
kodoc_width(encoder), kodoc_width_ratio(encoder));
/// When modifying the width ratio, the width will change as well
kodoc_set_width_ratio(encoder, 0.2);
printf("The width ratio was set to: %0.2f"
" (therefore the calculated width is %d)\n",
kodoc_width_ratio(encoder), kodoc_width(encoder));
// Allocate some storage for a "payload". The payload is what we would
// eventually send over a network.
uint32_t bytes_used;
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
// Allocate input and output data buffers
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
// Fill the input buffer with random data
uint32_t i = 0;
for (; i < block_size; ++i)
data_in[i] = rand() % 256;
// Assign the data buffers to the encoder and decoder
kodoc_set_const_symbols(encoder, data_in, block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
// Install a custom trace function for the decoder
kodoc_set_trace_callback(decoder, trace_callback, NULL);
uint32_t lost_payloads = 0;
uint32_t received_payloads = 0;
while (!kodoc_is_complete(decoder))
{
// The encoder will use a certain amount of bytes of the payload buffer
bytes_used = kodoc_write_payload(encoder, payload);
printf("Payload generated by encoder, bytes used = %d\n", bytes_used);
// Simulate a channel with a 50% loss rate
if (rand() % 2)
{
lost_payloads++;
printf("Symbol lost on channel\n\n");
continue;
}
// Pass the generated packet to the decoder
received_payloads++;
kodoc_read_payload(decoder, payload);
printf("Payload processed by decoder, current rank = %d\n\n",
kodoc_rank(decoder));
}
printf("Number of lost payloads: %d\n", lost_payloads);
printf("Number of received payloads: %d\n", received_payloads);
// Check that we properly decoded the data
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
// Free the allocated buffers and the kodo objects
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
int main()
{
// Seed the random number generator to produce different data every time
srand(time(NULL));
// Set the number of symbols and the symbol size
uint32_t max_symbols = 10;
uint32_t max_symbol_size = 100;
// Here we select the codec we wish to use
int32_t codec = kodoc_sparse_seed;
// Here we select the finite field to use.
// For the sparse seed codec, we can choose kodoc_binary, kodoc_binary4 or
// kodoc_binary8 (kodoc_binary is recommended for high performance)
int32_t finite_field = kodoc_binary8;
kodoc_factory_t encoder_factory =
kodoc_new_encoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory =
kodoc_new_decoder_factory(codec, finite_field,
max_symbols, max_symbol_size);
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
// The coding vector density on the encoder is set with
// kodoc_set_density().
// Note: the density can be adjusted at any time. This feature can be used
// to adapt to changing network conditions.
printf("The density defaults to: %0.2f\n", kodoc_density(encoder));
kodoc_set_density(encoder, 0.4);
printf("The density was set to: %0.2f\n", kodoc_density(encoder));
// A low density setting can lead to a large number of redundant symbols.
// In practice, the value should be tuned to the specific scenario.
// Allocate some storage for a "payload". The payload is what we would
// eventually send over a network.
uint32_t bytes_used;
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
// Allocate input and output data buffers
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
// Fill the input buffer with random data
uint32_t i = 0;
for(; i < block_size; ++i)
data_in[i] = rand() % 256;
// Assign the data buffers to the encoder and decoder
kodoc_set_const_symbols(encoder, data_in, block_size);
kodoc_set_mutable_symbols(decoder, data_out, block_size);
// Install a custom trace function for the decoder
kodoc_set_trace_callback(decoder, trace_callback, NULL);
uint32_t lost_payloads = 0;
uint32_t received_payloads = 0;
while (!kodoc_is_complete(decoder))
{
// The encoder will use a certain amount of bytes of the payload buffer
bytes_used = kodoc_write_payload(encoder, payload);
printf("Payload generated by encoder, bytes used = %d\n", bytes_used);
// Simulate a channel with a 50% loss rate
if (rand() % 2)
{
lost_payloads++;
printf("Symbol lost on channel\n\n");
continue;
}
// Pass the generated packet to the decoder
received_payloads++;
kodoc_read_payload(decoder, payload);
printf("Payload processed by decoder, current rank = %d\n\n",
kodoc_rank(decoder));
}
printf("Number of lost payloads: %d\n", lost_payloads);
printf("Number of received payloads: %d\n", received_payloads);
// Check that we properly decoded the data
if (memcmp(data_in, data_out, block_size) == 0)
{
printf("Data decoded correctly\n");
}
else
{
printf("Unexpected failure to decode, please file a bug report :)\n");
}
// Free the allocated buffers and the kodo objects
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
return 0;
}
void test_on_the_fly(uint32_t max_symbols, uint32_t max_symbol_size,
int32_t finite_field)
{
kodoc_factory_t encoder_factory = kodoc_new_encoder_factory(
kodoc_on_the_fly, finite_field, max_symbols, max_symbol_size);
kodoc_factory_t decoder_factory = kodoc_new_decoder_factory(
kodoc_on_the_fly, finite_field, max_symbols, max_symbol_size);
kodoc_coder_t encoder = kodoc_factory_build_coder(encoder_factory);
kodoc_coder_t decoder = kodoc_factory_build_coder(decoder_factory);
uint32_t symbol_size = kodoc_symbol_size(encoder);
uint32_t payload_size = kodoc_payload_size(encoder);
uint8_t* payload = (uint8_t*) malloc(payload_size);
uint32_t block_size = kodoc_block_size(encoder);
uint8_t* data_in = (uint8_t*) malloc(block_size);
uint8_t* data_out = (uint8_t*) malloc(block_size);
for (uint32_t i = 0; i < block_size; ++i)
data_in[i] = rand() % 256;
kodoc_set_mutable_symbols(decoder, data_out, block_size);
EXPECT_TRUE(kodoc_is_complete(decoder) == 0);
while (!kodoc_is_complete(decoder))
{
EXPECT_GE(kodoc_rank(encoder), kodoc_rank(decoder));
// The rank of an encoder indicates how many symbols have been added,
// i.e. how many symbols are available for encoding
uint32_t encoder_rank = kodoc_rank(encoder);
// Randomly choose to add a new symbol (with 50% probability)
// if the encoder rank is less than the maximum number of symbols
if ((rand() % 2) && encoder_rank < kodoc_symbols(encoder))
{
// Calculate the offset to the next symbol to insert
uint8_t* symbol = data_in + (encoder_rank * symbol_size);
kodoc_set_const_symbol(encoder, encoder_rank, symbol, symbol_size);
}
// Generate an encoded packet
kodoc_write_payload(encoder, payload);
// Simulate that 50% of the packets are lost
if (rand() % 2) continue;
// Packet got through - pass that packet to the decoder
kodoc_read_payload(decoder, payload);
// Check the decoder rank and symbol counters
EXPECT_GE(kodoc_rank(encoder), kodoc_rank(decoder));
EXPECT_GE(kodoc_rank(decoder), kodoc_symbols_uncoded(decoder));
EXPECT_GE(kodoc_rank(decoder), kodoc_symbols_partially_decoded(decoder));
EXPECT_EQ(kodoc_symbols(decoder) - kodoc_rank(decoder),
kodoc_symbols_missing(decoder));
// Check the decoder whether it is partially complete
// The decoder has to support the partial decoding tracker
if (kodoc_has_partial_decoding_interface(decoder) &&
kodoc_is_partially_complete(decoder))
{
for (uint32_t i = 0; i < kodoc_symbols(decoder); ++i)
{
// Go through all symbols that are already decoded
if (kodoc_is_symbol_uncoded(decoder, i))
{
// All uncoded symbols must have a pivot
EXPECT_TRUE(kodoc_is_symbol_pivot(decoder, i) != 0);
// The uncoded symbols cannot be missing
EXPECT_TRUE(kodoc_is_symbol_missing(decoder, i) == 0);
// The uncoded symbols cannot be partially decoded
EXPECT_TRUE(
kodoc_is_symbol_partially_decoded(decoder, i) == 0);
uint8_t* original = data_in + i * symbol_size;
uint8_t* target = data_out + i * symbol_size;
// verify the decoded symbol against the original data
EXPECT_EQ(memcmp(original, target, symbol_size), 0);
}
}
}
}
EXPECT_EQ(memcmp(data_in, data_out, block_size), 0);
free(data_in);
free(data_out);
free(payload);
kodoc_delete_coder(encoder);
kodoc_delete_coder(decoder);
kodoc_delete_factory(encoder_factory);
kodoc_delete_factory(decoder_factory);
}
