static int
lbc_banks_enable(struct lbc_softc *sc)
{
u_long size;
uint32_t regval;
int error, i;
for (i = 0; i < LBC_DEV_MAX; i++) {
size = sc->sc_banks[i].size;
if (size == 0) {
bus_space_write_4(sc->sc_bst, sc->sc_bsh,
LBC85XX_BR(i), 0);
bus_space_write_4(sc->sc_bst, sc->sc_bsh,
LBC85XX_OR(i), 0);
continue;
}
/*
* Compute and program BR value.
*/
regval = sc->sc_banks[i].addr;
switch (sc->sc_banks[i].width) {
case 8:
regval |= (1 << 11);
break;
case 16:
regval |= (2 << 11);
break;
case 32:
regval |= (3 << 11);
break;
default:
error = EINVAL;
goto fail;
}
regval |= (sc->sc_banks[i].decc << 9);
regval |= (sc->sc_banks[i].wp << 8);
regval |= (sc->sc_banks[i].msel << 5);
regval |= (sc->sc_banks[i].atom << 2);
regval |= 1;
bus_space_write_4(sc->sc_bst, sc->sc_bsh,
LBC85XX_BR(i), regval);
/*
* Compute and program OR value.
*/
regval = lbc_address_mask(size);
switch (sc->sc_banks[i].msel) {
case LBCRES_MSEL_GPCM:
/* TODO Add flag support for option registers */
regval |= 0x0ff7;
break;
case LBCRES_MSEL_FCM:
/* TODO Add flag support for options register */
regval |= 0x0796;
break;
case LBCRES_MSEL_UPMA:
case LBCRES_MSEL_UPMB:
case LBCRES_MSEL_UPMC:
printf("UPM mode not supported yet!");
error = ENOSYS;
goto fail;
}
bus_space_write_4(sc->sc_bst, sc->sc_bsh,
LBC85XX_OR(i), regval);
}
/*
* Initialize configuration register:
* - enable Local Bus
* - set data buffer control signal function
* - disable parity byte select
* - set ECC parity type
* - set bus monitor timing and timer prescale
*/
bus_space_write_4(sc->sc_bst, sc->sc_bsh, LBC85XX_LBCR, 0);
/*
* Initialize clock ratio register:
* - disable PLL bypass mode
* - configure LCLK delay cycles for the assertion of LALE
* - set system clock divider
*/
bus_space_write_4(sc->sc_bst, sc->sc_bsh, LBC85XX_LCRR, 0x00030008);
return (0);
fail:
lbc_banks_unmap(sc);
return (error);
}
static int
lbc_banks_enable(struct lbc_softc *sc)
{
u_long size;
uint32_t regval;
int error, i;
for (i = 0; i < LBC_DEV_MAX; i++) {
size = sc->sc_banks[i].size;
if (size == 0)
continue;
/*
* Compute and program BR value.
*/
regval = sc->sc_banks[i].addr;
switch (sc->sc_banks[i].width) {
case 8:
regval |= (1 << 11);
break;
case 16:
regval |= (2 << 11);
break;
case 32:
regval |= (3 << 11);
break;
default:
error = EINVAL;
goto fail;
}
regval |= (sc->sc_banks[i].decc << 9);
regval |= (sc->sc_banks[i].wp << 8);
regval |= (sc->sc_banks[i].msel << 5);
regval |= (sc->sc_banks[i].atom << 2);
regval |= 1;
bus_space_write_4(sc->sc_bst, sc->sc_bsh,
LBC85XX_BR(i), regval);
/*
* Compute and program OR value.
*/
regval = lbc_address_mask(size);
switch (sc->sc_banks[i].msel) {
case LBCRES_MSEL_GPCM:
/* TODO Add flag support for option registers */
regval |= 0x0ff7;
break;
case LBCRES_MSEL_FCM:
/* TODO Add flag support for options register */
regval |= 0x0796;
break;
case LBCRES_MSEL_UPMA:
case LBCRES_MSEL_UPMB:
case LBCRES_MSEL_UPMC:
printf("UPM mode not supported yet!");
error = ENOSYS;
goto fail;
}
bus_space_write_4(sc->sc_bst, sc->sc_bsh,
LBC85XX_OR(i), regval);
}
return (0);
fail:
lbc_banks_unmap(sc);
return (error);
}
static int
lbc_init_child(device_t dev, device_t child)
{
struct lbc_softc *sc;
struct lbc_devinfo *dinfo;
const struct lbc_resource *res;
u_long start, size;
uint32_t regbuff;
int error, unit;
sc = device_get_softc(dev);
dinfo = device_get_ivars(child);
res = mpc85xx_lbc_resources;
regbuff = 0;
unit = -1;
for (; res->lbr_devtype; res++) {
if (res->lbr_unit != dinfo->lbc_unit)
continue;
start = res->lbr_base_addr;
size = res->lbr_size;
unit = res->lbr_unit;
/*
* Configure LAW for this LBC device and map its physical
* memory region into KVA
*/
error = law_enable(OCP85XX_TGTIF_LBC, start, size);
if (error)
return (error);
sc->sc_kva[unit] = (vm_offset_t)pmap_mapdev(start, size);
if (sc->sc_kva[unit] == 0) {
law_disable(OCP85XX_TGTIF_LBC, start, size);
return (ENOSPC);
}
/*
* Compute and program BR value
*/
regbuff |= start;
switch (res->lbr_port_size) {
case 8:
regbuff |= (1 << 11);
break;
case 16:
regbuff |= (2 << 11);
break;
case 32:
regbuff |= (3 << 11);
break;
default:
error = EINVAL;
goto fail;
}
regbuff |= (res->lbr_decc << 9);
regbuff |= (res->lbr_wp << 8);
regbuff |= (res->lbr_msel << 5);
regbuff |= (res->lbr_atom << 2);
regbuff |= 1;
lbc_write_reg(sc, LBC85XX_BR(unit), regbuff);
/*
* Compute and program OR value
*/
regbuff = 0;
regbuff |= lbc_address_mask(size);
switch (res->lbr_msel) {
case LBCRES_MSEL_GPCM:
/* TODO Add flag support for option registers */
regbuff |= 0x00000ff7;
break;
case LBCRES_MSEL_FCM:
printf("FCM mode not supported yet!");
error = ENOSYS;
goto fail;
case LBCRES_MSEL_UPMA:
case LBCRES_MSEL_UPMB:
case LBCRES_MSEL_UPMC:
printf("UPM mode not supported yet!");
error = ENOSYS;
goto fail;
}
lbc_write_reg(sc, LBC85XX_OR(unit), regbuff);
return (0);
}
fail:
if (unit != -1) {
law_disable(OCP85XX_TGTIF_LBC, start, size);
pmap_unmapdev(sc->sc_kva[unit], size);
return (error);
} else
return (ENOENT);
}
