static void lcd_menu_change_material_remove_wait_user()
{
LED_GLOW();
lcd_question_screen(NULL, lcd_menu_change_material_remove_wait_user_ready, PSTR("READY"), lcd_menu_main, cancelMaterialInsert, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(20, PSTR("Remove material"));
lcd_lib_update_screen();
}
static void lcd_menu_print_printing()
{
lcd_question_screen(lcd_menu_print_tune, NULL, PSTR("TUNE"), lcd_menu_print_abort, NULL, PSTR("ABORT"));
uint8_t progress = card.getFilePos() / ((card.getFileSize() + 123) / 124);
char buffer[16];
char* c;
switch(printing_state)
{
default:
lcd_lib_draw_string_centerP(20, PSTR("Printing:"));
lcd_lib_draw_string_center(30, card.longFilename);
break;
case PRINT_STATE_HEATING:
lcd_lib_draw_string_centerP(20, PSTR("Heating"));
c = int_to_string(current_temperature[0], buffer, PSTR("C"));
*c++ = '/';
c = int_to_string(target_temperature[0], c, PSTR("C"));
lcd_lib_draw_string_center(30, buffer);
break;
case PRINT_STATE_HEATING_BED:
lcd_lib_draw_string_centerP(20, PSTR("Heating buildplate"));
c = int_to_string(current_temperature_bed, buffer, PSTR("C"));
*c++ = '/';
c = int_to_string(target_temperature_bed, c, PSTR("C"));
lcd_lib_draw_string_center(30, buffer);
break;
}
float printTimeMs = (millis() - starttime);
float printTimeSec = printTimeMs / 1000L;
float totalTimeMs = float(printTimeMs) * float(card.getFileSize()) / float(card.getFilePos());
static float totalTimeSmoothSec;
totalTimeSmoothSec = (totalTimeSmoothSec * 999L + totalTimeMs / 1000L) / 1000L;
if (isinf(totalTimeSmoothSec))
totalTimeSmoothSec = totalTimeMs;
if (LCD_DETAIL_CACHE_TIME() == 0 && printTimeSec < 60)
{
totalTimeSmoothSec = totalTimeMs / 1000;
lcd_lib_draw_stringP(5, 10, PSTR("Time left unknown"));
}else{
unsigned long totalTimeSec;
if (printTimeSec < LCD_DETAIL_CACHE_TIME() / 2)
{
float f = float(printTimeSec) / float(LCD_DETAIL_CACHE_TIME() / 2);
totalTimeSec = float(totalTimeSmoothSec) * f + float(LCD_DETAIL_CACHE_TIME()) * (1 - f);
}else{
totalTimeSec = totalTimeSmoothSec;
}
unsigned long timeLeftSec = totalTimeSec - printTimeSec;
int_to_time_string(timeLeftSec, buffer);
lcd_lib_draw_stringP(5, 10, PSTR("Time left"));
lcd_lib_draw_string(65, 10, buffer);
}
lcd_progressbar(progress);
lcd_lib_update_screen();
}
static void lcd_menu_change_material_remove_wait_user()
{
LED_GLOW();
setTargetHotend(material[active_extruder].temperature, active_extruder);
lcd_question_screen(NULL, lcd_menu_change_material_remove_wait_user_ready, PSTR("READY"), post_change_material_menu, cancelMaterialInsert, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(20, PSTR("Remove material"));
lcd_lib_update_screen();
}
static void lcd_menu_print_abort()
{
LED_GLOW();
lcd_question_screen(lcd_menu_print_ready, abortPrint, PSTR("YES"), previousMenu, NULL, PSTR("NO"));
lcd_lib_draw_string_centerP(20, PSTR("Abort the print?"));
lcd_lib_update_screen();
}
//Started bed leveling from the calibration menu
void lcd_menu_first_run_start_bed_leveling()
{
lcd_question_screen(lcd_menu_first_run_bed_level_center_adjust, homeAndParkHeadForCenterAdjustment2, PSTR("POKRACOVAT"), lcd_menu_main, NULL, PSTR("ZRUSIT"));
lcd_lib_draw_string_centerP(10, PSTR("Tento pruvodce vas"));
lcd_lib_draw_string_centerP(20, PSTR("povedek krok za"));
lcd_lib_draw_string_centerP(30, PSTR("krokem pri kalibraci"));
lcd_lib_draw_string_centerP(40, PSTR("tiskove podlozky."));
lcd_lib_update_screen();
}
//Started bed leveling from the calibration menu
void lcd_menu_first_run_start_bed_leveling()
{
lcd_question_screen(lcd_menu_first_run_bed_level_center_adjust, homeAndParkHeadForCenterAdjustment2, PSTR("CONTINUE"), lcd_menu_main, NULL, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(10, PSTR("I will guide you"));
lcd_lib_draw_string_centerP(20, PSTR("through the process"));
lcd_lib_draw_string_centerP(30, PSTR("of adjusting your"));
lcd_lib_draw_string_centerP(40, PSTR("buildplate."));
lcd_lib_update_screen();
}
static void lcd_menu_print_heatup()
{
lcd_question_screen(lcd_menu_print_tune, NULL, PSTR("TUNE"), lcd_menu_print_abort, NULL, PSTR("ABORT"));
if (current_temperature_bed > target_temperature_bed - 10)
{
for(uint8_t e=0; e<EXTRUDERS; e++)
{
if (LCD_DETAIL_CACHE_MATERIAL(e) < 1 || target_temperature[e] > 0)
continue;
target_temperature[e] = material[e].temperature;
}
if (current_temperature_bed >= target_temperature_bed - TEMP_WINDOW * 2 && !is_command_queued())
{
bool ready = true;
for(uint8_t e=0; e<EXTRUDERS; e++)
if (current_temperature[e] < target_temperature[e] - TEMP_WINDOW)
ready = false;
if (ready)
{
doStartPrint();
currentMenu = lcd_menu_print_printing;
}
}
}
uint8_t progress = 125;
for(uint8_t e=0; e<EXTRUDERS; e++)
{
if (LCD_DETAIL_CACHE_MATERIAL(e) < 1 || target_temperature[e] < 1)
continue;
if (current_temperature[e] > 20)
progress = min(progress, (current_temperature[e] - 20) * 125 / (target_temperature[e] - 20 - TEMP_WINDOW));
else
progress = 0;
}
if (current_temperature_bed > 20)
progress = min(progress, (current_temperature_bed - 20) * 125 / (target_temperature_bed - 20 - TEMP_WINDOW));
else
progress = 0;
if (progress < minProgress)
progress = minProgress;
else
minProgress = progress;
lcd_lib_draw_string_centerP(10, PSTR("Heating up..."));
lcd_lib_draw_string_centerP(20, PSTR("Preparing to print:"));
lcd_lib_draw_string_center(30, card.longFilename);
lcd_progressbar(progress);
lcd_lib_update_screen();
}
static void lcd_menu_first_run_material_select_confirm_abs()
{
LED_GLOW();
lcd_question_screen(lcd_menu_first_run_material_select_2, NULL, PSTR("YES"), lcd_menu_first_run_material_select_pla_abs, NULL, PSTR("NO"));
DRAW_PROGRESS_NR(18);
lcd_lib_draw_string_centerP(20, PSTR("You have chosen"));
lcd_lib_draw_string_centerP(30, PSTR("ABS as material,"));
lcd_lib_draw_string_centerP(40, PSTR("is this right?"));
lcd_lib_update_screen();
}
static void lcd_menu_first_run_material_select_confirm_material()
{
LED_GLOW();
lcd_question_screen(lcd_menu_first_run_material_select_2, NULL, PSTR("YES"), lcd_menu_first_run_material_select_material, NULL, PSTR("NO"));
DRAW_PROGRESS_NR(14);
lcd_lib_draw_string_centerP(20, PSTR("You have chosen"));
lcd_lib_draw_string_center(30, card.longFilename);
lcd_lib_draw_string_centerP(40, PSTR("is this right?"));
lcd_lib_update_screen();
}
static void lcd_menu_print_classic_warning()
{
lcd_question_screen(lcd_menu_print_printing, doStartPrint, PSTR("CONTINUE"), lcd_menu_print_select, NULL, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(10, PSTR("This file will"));
lcd_lib_draw_string_centerP(20, PSTR("override machine"));
lcd_lib_draw_string_centerP(30, PSTR("setting with setting"));
lcd_lib_draw_string_centerP(40, PSTR("from the slicer."));
lcd_lib_update_screen();
}
static void lcd_menu_change_material_insert()
{
LED_GLOW();
lcd_question_screen(lcd_menu_change_material_select_material, materialInsertReady, PSTR("READY"), lcd_menu_main, cancelMaterialInsert, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(20, PSTR("Wait till material"));
lcd_lib_draw_string_centerP(30, PSTR("comes out the nozzle"));
if (movesplanned() < 2)
{
current_position[E_AXIS] += 0.5;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENT_INSERT_EXTRUDE_SPEED, active_extruder);
}
lcd_lib_update_screen();
}
static void lcd_menu_change_material_insert()
{
LED_GLOW();
lcd_question_screen(post_change_material_menu, materialInsertReady, PSTR("READY"), post_change_material_menu, cancelMaterialInsert, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(20, PSTR("Wait till material"));
lcd_lib_draw_string_centerP(30, PSTR("comes out the nozzle"));
if (movesplanned() < 2)
{
plan_set_e_position(0);
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], 0.5 / volume_to_filament_length[active_extruder], FILAMENT_INSERT_EXTRUDE_SPEED, active_extruder);
}
lcd_lib_update_screen();
}
static void lcd_menu_change_material_insert_wait_user()
{
LED_GLOW();
if (printing_state == PRINT_STATE_NORMAL && movesplanned() < 2)
{
current_position[E_AXIS] += 0.5;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENT_INSERT_SPEED, active_extruder);
}
lcd_question_screen(NULL, lcd_menu_change_material_insert_wait_user_ready, PSTR("READY"), lcd_menu_main, cancelMaterialInsert, PSTR("CANCEL"));
lcd_lib_draw_string_centerP(10, PSTR("Insert new material"));
lcd_lib_draw_string_centerP(20, PSTR("from the backside of"));
lcd_lib_draw_string_centerP(30, PSTR("your machine,"));
lcd_lib_draw_string_centerP(40, PSTR("above the arrow."));
lcd_lib_update_screen();
}
