Exemplos de lcd_set_flush_dcache em C++ (Cpp)

Exemplo n.º 1

Arquivo: tegra.c Projeto: JamesAng/ub

void lcd_ctrl_init(void *lcdbase)
{
	int type = DCACHE_OFF;
	int size;

	assert(disp_config);

	/* Make sure that we can acommodate the selected LCD */
	assert(disp_config->width <= LCD_MAX_WIDTH);
	assert(disp_config->height <= LCD_MAX_HEIGHT);
	assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP);
	if (disp_config->width <= LCD_MAX_WIDTH
			&& disp_config->height <= LCD_MAX_HEIGHT
			&& disp_config->log2_bpp <= LCD_MAX_LOG2_BPP)
		update_panel_size(disp_config);
	size = lcd_get_size(&lcd_line_length);

	/* Set up the LCD caching as requested */
	if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
		type = DCACHE_WRITETHROUGH;
	else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
		type = DCACHE_WRITEBACK;
	mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);

	/* Enable flushing after LCD writes if requested */
	lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);

	debug("LCD frame buffer at %08X\n", disp_config->frame_buffer);
}

Exemplo n.º 2

Arquivo: common.c Projeto: Noltari/u-boot

void lcd_ctrl_init(void *lcdbase)
{
	struct am335x_lcdpanel lcd_panel;

	memset(&lcd_panel, 0, sizeof(struct am335x_lcdpanel));
	if (load_lcdtiming(&lcd_panel) != 0)
		return;

	lcd_panel.panel_power_ctrl = &lcdpower;

	if (0 != am335xfb_init(&lcd_panel))
		printf("ERROR: failed to initialize video!");
	/*
	 * modifiy panel info to 'real' resolution, to operate correct with
	 * lcd-framework.
	 */
	panel_info.vl_col = lcd_panel.hactive;
	panel_info.vl_row = lcd_panel.vactive;

	lcd_set_flush_dcache(1);
}

Exemplo n.º 3

Arquivo: common.c Projeto: RobertCNelson/u-boot-boards

void lcd_ctrl_init(void *lcdbase)
{
	struct am335x_lcdpanel lcd_panel;
#ifdef CONFIG_USE_FDT
	/* TODO: is there a better place to load the dtb ? */
	load_devicetree();
#endif
	memset(&lcd_panel, 0, sizeof(struct am335x_lcdpanel));
	if (load_lcdtiming(&lcd_panel) != 0)
		return;

	lcd_panel.panel_power_ctrl = &lcdpower;

	if (0 != am335xfb_init(&lcd_panel))
		printf("ERROR: failed to initialize video!");
	/*
	 * modifiy panel info to 'real' resolution, to operate correct with
	 * lcd-framework.
	 */
	panel_info.vl_col = lcd_panel.hactive;
	panel_info.vl_row = lcd_panel.vactive;

	lcd_set_flush_dcache(1);
}

Exemplo n.º 4

Arquivo: atmel_hlcdfb.c Projeto: RobertCNelson/u-boot-boards

void lcd_ctrl_init(void *lcdbase)
{
	unsigned long value;
	struct lcd_dma_desc *desc;
	struct atmel_hlcd_regs *regs;
	int ret;

	if (!has_lcdc())
		return;     /* No lcdc */

	regs = (struct atmel_hlcd_regs *)panel_info.mmio;

	/* Disable DISP signal */
	writel(LCDC_LCDDIS_DISPDIS, &regs->lcdc_lcddis);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
			   false, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);
	/* Disable synchronization */
	writel(LCDC_LCDDIS_SYNCDIS, &regs->lcdc_lcddis);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
			   false, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);
	/* Disable pixel clock */
	writel(LCDC_LCDDIS_CLKDIS, &regs->lcdc_lcddis);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
			   false, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);
	/* Disable PWM */
	writel(LCDC_LCDDIS_PWMDIS, &regs->lcdc_lcddis);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
			   false, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);

	/* Set pixel clock */
	value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
	if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
		value++;

	if (value < 1) {
		/* Using system clock as pixel clock */
		writel(LCDC_LCDCFG0_CLKDIV(0)
			| LCDC_LCDCFG0_CGDISHCR
			| LCDC_LCDCFG0_CGDISHEO
			| LCDC_LCDCFG0_CGDISOVR1
			| LCDC_LCDCFG0_CGDISBASE
			| panel_info.vl_clk_pol
			| LCDC_LCDCFG0_CLKSEL,
			&regs->lcdc_lcdcfg0);

	} else {
		writel(LCDC_LCDCFG0_CLKDIV(value - 2)
			| LCDC_LCDCFG0_CGDISHCR
			| LCDC_LCDCFG0_CGDISHEO
			| LCDC_LCDCFG0_CGDISOVR1
			| LCDC_LCDCFG0_CGDISBASE
			| panel_info.vl_clk_pol,
			&regs->lcdc_lcdcfg0);
	}

	/* Initialize control register 5 */
	value = 0;

	value |= panel_info.vl_sync;

#ifndef LCD_OUTPUT_BPP
	/* Output is 24bpp */
	value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
#else
	switch (LCD_OUTPUT_BPP) {
	case 12:
		value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
		break;
	case 16:
		value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
		break;
	case 18:
		value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
		break;
	case 24:
		value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
		break;
	default:
		BUG();
		break;
	}
#endif

	value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME);
	value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
	writel(value, &regs->lcdc_lcdcfg5);

	/* Vertical & Horizontal Timing */
	value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1);
	value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1);
	writel(value, &regs->lcdc_lcdcfg1);

	value = LCDC_LCDCFG2_VBPW(panel_info.vl_upper_margin);
	value |= LCDC_LCDCFG2_VFPW(panel_info.vl_lower_margin - 1);
	writel(value, &regs->lcdc_lcdcfg2);

	value = LCDC_LCDCFG3_HBPW(panel_info.vl_left_margin - 1);
	value |= LCDC_LCDCFG3_HFPW(panel_info.vl_right_margin - 1);
	writel(value, &regs->lcdc_lcdcfg3);

	/* Display size */
	value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1);
	value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1);
	writel(value, &regs->lcdc_lcdcfg4);

	writel(LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO,
	       &regs->lcdc_basecfg0);

	switch (NBITS(panel_info.vl_bpix)) {
	case 16:
		writel(LCDC_BASECFG1_RGBMODE_16BPP_RGB_565,
		       &regs->lcdc_basecfg1);
		break;
	case 32:
		writel(LCDC_BASECFG1_RGBMODE_24BPP_RGB_888,
		       &regs->lcdc_basecfg1);
		break;
	default:
		BUG();
		break;
	}

	writel(LCDC_BASECFG2_XSTRIDE(0), &regs->lcdc_basecfg2);
	writel(0, &regs->lcdc_basecfg3);
	writel(LCDC_BASECFG4_DMA, &regs->lcdc_basecfg4);

	/* Disable all interrupts */
	writel(~0UL, &regs->lcdc_lcdidr);
	writel(~0UL, &regs->lcdc_baseidr);

	/* Setup the DMA descriptor, this descriptor will loop to itself */
	desc = (struct lcd_dma_desc *)(lcdbase - 16);

	desc->address = (u32)lcdbase;
	/* Disable DMA transfer interrupt & descriptor loaded interrupt. */
	desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
			| LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
	desc->next = (u32)desc;

	/* Flush the DMA descriptor if we enabled dcache */
	flush_dcache_range((u32)desc, (u32)desc + sizeof(*desc));

	writel(desc->address, &regs->lcdc_baseaddr);
	writel(desc->control, &regs->lcdc_basectrl);
	writel(desc->next, &regs->lcdc_basenext);
	writel(LCDC_BASECHER_CHEN | LCDC_BASECHER_UPDATEEN,
	       &regs->lcdc_basecher);

	/* Enable LCD */
	value = readl(&regs->lcdc_lcden);
	writel(value | LCDC_LCDEN_CLKEN, &regs->lcdc_lcden);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
			   true, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);
	value = readl(&regs->lcdc_lcden);
	writel(value | LCDC_LCDEN_SYNCEN, &regs->lcdc_lcden);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
			   true, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);
	value = readl(&regs->lcdc_lcden);
	writel(value | LCDC_LCDEN_DISPEN, &regs->lcdc_lcden);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
			   true, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);
	value = readl(&regs->lcdc_lcden);
	writel(value | LCDC_LCDEN_PWMEN, &regs->lcdc_lcden);
	ret = wait_for_bit(__func__, &regs->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
			   true, 1000, false);
	if (ret)
		printf("%s: %d: Timeout!\n", __func__, __LINE__);

	/* Enable flushing if we enabled dcache */
	lcd_set_flush_dcache(1);
}