static int broadcast_tdmb_get_ch_info(void __user *arg)
{
int rc = ERROR;
char fic_kernel_buffer[400];
unsigned int fic_len = 0;
struct broadcast_tdmb_ch_info __user* puserdata = (struct broadcast_tdmb_ch_info __user*)arg;
if((puserdata == NULL)||( puserdata->ch_buf == NULL))
{
printk("broadcast_tdmb_get_ch_info argument error\n");
return rc;
}
memset(fic_kernel_buffer, 0x00, sizeof(fic_kernel_buffer));
//
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
rc = broadcast_drv_if_get_ch_info_fci(fic_kernel_buffer, &fic_len);
}
else
#endif
//
rc = broadcast_drv_if_get_ch_info(fic_kernel_buffer, &fic_len);
if(rc == OK)
{
if(copy_to_user((void __user*)puserdata->ch_buf, (void*)fic_kernel_buffer, fic_len))
{
fic_len = 0;
rc = ERROR;
}
}
else
{
fic_len = 0;
rc = ERROR;
}
puserdata->buf_len = fic_len;
return rc;
}
static int __init imx219_init_module(void)
{
int32_t rc = 0;
hw_rev_type rev_type = 0;
pr_info("%s:%d\n", __func__, __LINE__);
rev_type = lge_get_board_revno();
#if 1//
switch(rev_type) {
case HW_REV_0:
printk("%s: Sensor power is set as Rev.0\n", __func__);
imx219_s_ctrl.power_setting_array.power_setting = imx219_power_setting_rev_0;
imx219_s_ctrl.power_setting_array.size = ARRAY_SIZE(imx219_power_setting_rev_0);
break;
case HW_REV_A:
#if defined(CONFIG_MACH_MSM8X10_W5N_GLOBAL_COM) || defined(CONFIG_MACH_MSM8X10_W5_GLOBAL_COM)
printk("%s: Sensor power is set as Rev. %d\n", __func__,rev_type);
imx219_s_ctrl.power_setting_array.power_setting = imx219_power_setting_rev_a;
imx219_s_ctrl.power_setting_array.size = ARRAY_SIZE(imx219_power_setting_rev_a);
#elif defined(CONFIG_MACH_MSM8X10_W6)
printk("%s: HW rev is %d. But sensor power is set as Rev.B \n", __func__,rev_type);
imx219_s_ctrl.power_setting_array.power_setting = imx219_power_setting_rev_b;
imx219_s_ctrl.power_setting_array.size = ARRAY_SIZE(imx219_power_setting_rev_b);
#endif
case HW_REV_B:
default:
printk("%s: Sensor power is set as Rev.%d(Line:%d)\n", __func__,rev_type, __LINE__);
#if defined(CONFIG_MACH_MSM8X10_W5N_GLOBAL_COM) || defined(CONFIG_MACH_MSM8X10_W5_GLOBAL_COM) || defined(CONFIG_MACH_MSM8X10_W6)
imx219_s_ctrl.power_setting_array.power_setting = imx219_power_setting_rev_b;
imx219_s_ctrl.power_setting_array.size = ARRAY_SIZE(imx219_power_setting_rev_b);
#else
imx219_s_ctrl.power_setting_array.power_setting = imx219_power_setting_rev_a;
imx219_s_ctrl.power_setting_array.size = ARRAY_SIZE(imx219_power_setting_rev_a);
#endif
break;
}
#endif
rc = platform_driver_probe(&imx219_platform_driver,
imx219_platform_probe);
if (!rc)
return rc;
pr_err("%s:%d rc %d\n", __func__, __LINE__, rc);
return i2c_add_driver(&imx219_i2c_driver);
}
static int broadcast_tdmb_power_on(void)
{
int rc = ERROR;
//20130516_wonhee.jeong Code for revision separation [START]
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
rc = broadcast_drv_if_power_on_fci();
broadcast_drv_if_user_stop_fci( 0 );
return rc;
}
#endif
//20130516_wonhee.jeong Code for revision separation [END]
rc = broadcast_drv_if_power_on();
broadcast_drv_if_user_stop( 0 );
return rc;
}
static int broadcast_tdmb_power_on(void)
{
int rc = ERROR;
//
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
rc = broadcast_drv_if_power_on_fci();
broadcast_drv_if_user_stop_fci( 0 );
return rc;
}
#endif
//
rc = broadcast_drv_if_power_on();
broadcast_drv_if_user_stop( 0 );
return rc;
}
static int broadcast_tdmb_detect_sync(void __user *arg)
{
int rc = ERROR;
int udata;
int __user* puser = (int __user*)arg;
udata = *puser;
//
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
rc = broadcast_drv_if_detect_sync_fci(udata);
return rc;
}
#endif
//
rc = broadcast_drv_if_detect_sync(udata);
return rc;
}
static int broadcast_tdmb_detect_sync(void __user *arg)
{
int rc = ERROR;
int udata;
int __user* puser = (int __user*)arg;
udata = *puser;
//20130516_wonhee.jeong Code for revision separation [START]
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
rc = broadcast_drv_if_detect_sync_fci(udata);
return rc;
}
#endif
//20130516_wonhee.jeong Code for revision separation [END]
rc = broadcast_drv_if_detect_sync(udata);
return rc;
}
static void max14688_irq_jack_inserted (struct max14688 *me)
{
unsigned long det_work_delay = msecs_to_jiffies(1000);
/* Check INT bit and STATUS_INT bit for avoiding JIG mode */
if (unlikely(max14688_get_status(me, STATUS_INT) && max14688_get_status(me, STATUS_MICIN))) {
log_info("JIG power detected\n");
max14688_disable_irq(me, IRQ_SWD);
#ifdef CONFIG_EARJACK_DEBUGGER
if (lge_get_board_revno() < HW_REV_1_0)
msm_serial_set_uart_console(1);
#endif
me->matched_jack = -1;
me->matched_button = -1;
goto out;
}
if (unlikely(__present_valid_jack(me))) {
log_warn("new jack detected during insertion of jack %s\n",
__current_jack_name(me));
#ifdef MAX14688_OVERWRITE_JACK_INSERTION
max14688_irq_jack_removed(me);
#else
goto out;
#endif
}
if (unlikely(delayed_work_pending(&me->det_work))) {
log_warn("detection in progress\n");
goto out;
}
log_dbg("%s\n", __func__);
max14688_write_mode0(me, MAX14688_MODE_HIGH);
max14688_write_mode1(me, MAX14688_MODE_LOW);
schedule_delayed_work(&me->det_work, det_work_delay);
out:
return;
}
/*
* Description :
* Input :
* Output :
*/
int felica_get_int_gpio_num(void)
{
/* If it has different GPIO number each HW version, please use this route. */
#ifdef CONFIG_LGE_FELICA_NFC_DCM
int gpionum = GPIO_FELICA_INT;
if (lge_get_board_revno() < HW_REV_D)
{
gpionum = GPIO_FELICA_INT;
}
else
{
gpionum = GPIO_FELICA_INT_REV_D;
}
FELICA_DEBUG_MSG_LOW("[FELICA_GPIO] felica_get_rws_gpio_num(%d) \n",gpionum);
return gpionum;
#else
return GPIO_FELICA_INT;
#endif
}
static int8 broadcast_tdmb_user_stop(void __user *arg)
{
int udata;
int __user* puser = (int __user*)arg;
udata = *puser;
//printk("broadcast_tdmb_user_stop data =(%d)\n", udata);
//20130516_wonhee.jeong Code for revision separation [START]
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
broadcast_drv_if_user_stop_fci( udata );
return OK;
}
#endif
//20130516_wonhee.jeong Code for revision separation [END]
broadcast_drv_if_user_stop( udata );
return OK;
}
static int8 broadcast_tdmb_user_stop(void __user *arg)
{
int udata;
int __user* puser = (int __user*)arg;
udata = *puser;
//
//
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
broadcast_drv_if_user_stop_fci( udata );
return OK;
}
#endif
//
broadcast_drv_if_user_stop( udata );
return OK;
}
static void __init touch_panel(int bus_num)
{
#if defined(CONFIG_TOUCHSCREEN_ATMEL_MAXT224E) ||\
defined(CONFIG_TOUCHSCREEN_MMS136) ||\
defined(CONFIG_TOUCHSCREEN_MMS128)
#if defined (CONFIG_MACH_MSM8960_L1A) || defined (CONFIG_MACH_MSM8960_L1T)
i2c_register_board_info(MSM_8960_GSBI3_QUP_I2C_BUS_ID,
(&melfas_touch_panel_i2c_bdinfo[2]), 1);
#else
if (lge_get_board_revno() >= HW_REV_B) {
i2c_register_board_info(MSM_8960_GSBI3_QUP_I2C_BUS_ID,
(&melfas_touch_panel_i2c_bdinfo[0]), 1);
} else {
i2c_register_board_info(MSM_8960_GSBI3_QUP_I2C_BUS_ID,
(&melfas_touch_panel_i2c_bdinfo[1]), 1);
}
#endif
#elif defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)
i2c_register_board_info(MSM_8960_GSBI3_QUP_I2C_BUS_ID,
&synaptics_panel_i2c_bdinfo[0], 1);
#endif
}
int felica_get_int_gpio_num(void)
{
/* */
#ifdef CONFIG_LGE_FELICA_NFC_DCM
int gpionum = GPIO_FELICA_INT;
if (lge_get_board_revno() < HW_REV_D)
{
gpionum = GPIO_FELICA_INT;
}
else
{
gpionum = GPIO_FELICA_INT_REV_D;
}
#ifdef FEATURE_DEBUG_LOW
FELICA_DEBUG_MSG("[FELICA_GPIO] felica_get_rws_gpio_num(%d) \n",gpionum);
#endif
return gpionum;
#else
return GPIO_FELICA_INT;
#endif
}
static int __init leds_init(void)
{
#ifdef CONFIG_MACH_LGE
#ifdef CONFIG_MACH_MSM8926_B2L_ATT
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
#endif
leds_class = class_create(THIS_MODULE, "leds");
if (IS_ERR(leds_class))
return PTR_ERR(leds_class);
leds_class->suspend = led_suspend;
leds_class->resume = led_resume;
leds_class->dev_attrs = led_class_attrs;
#ifdef CONFIG_LEDS_PM8226_EMOTIONAL
#ifdef CONFIG_MACH_MSM8926_B2L_ATT
if(HW_REV_A < hw_rev)
#endif
led_pattern_sysfs_register();
#endif
return 0;
}
static int __init imx214_init_module(void)
{
int32_t rc = 0;
CDBG("%s E\n", __func__);
#if defined(CONFIG_MACH_LGE)
switch(lge_get_board_revno()) {
case HW_REV_A:
default:
CDBG("%s: Sensor power is set \n", __func__);
imx214_s_ctrl.power_setting_array.power_setting = imx214_power_setting;
imx214_s_ctrl.power_setting_array.size = ARRAY_SIZE(imx214_power_setting);
break;
}
#endif
rc = platform_driver_probe(&imx214_platform_driver,
imx214_platform_probe);
if (!rc) {
CDBG("%s: X, rc = %d\n", __func__, rc);
return rc;
}
return i2c_add_driver(&imx214_i2c_driver);
}
static __init void mako_fixup_cam(void)
{
int ret;
int gpio_vcm_en;
if (lge_get_board_revno() > HW_REV_1_0)
gpio_vcm_en = GPIO_CAM_VCM_EN_11;
else
gpio_vcm_en = GPIO_CAM_VCM_EN;
ret = gpio_request_one(gpio_vcm_en, GPIOF_INIT_HIGH, "vcm_en");
if (ret < 0) {
pr_err("%s: failed gpio request vcm_en\n", __func__);
return;
}
gpio_free(gpio_vcm_en);
ret = gpio_request_array(apq8064_common_cam_gpio,
ARRAY_SIZE(apq8064_common_cam_gpio));
if (ret < 0)
pr_err("%s: failed gpio request common_cam_gpio\n", __func__);
}
int __devinit broadcast_tdmb_drv_init(void)
{
int rc = 0;
printk("%s is called\n", "broadcast_tdmb_drv_init");
//20130516_wonhee.jeong Code for revision separation [START]
#if defined (CONFIG_MACH_MSM8974_Z_KR)
if(lge_get_board_revno() == HW_REV_A){
printk("TDMB T3A00 Not support in MSM8974_Z_KR Rev.A board\n");
return rc;
}
#endif
//20130516_wonhee.jeong Code for revision separation [END]
rc = broadcast_tdmb_drv_start();
if (rc) {
printk("broadcast_tdmb_drv_start %s failed to load\n", __func__);
return rc;
}
rc = spi_register_driver(&broadcast_tdmb_driver);
printk("broadcast_spi_add_driver rc = (%d)\n", rc);
return rc;
}
static int __init hi544_init_module(void)
{
int32_t rc = 0;
pr_info("%s:%d\n", __func__, __LINE__);
#if defined(CONFIG_MACH_MSM8926_E2_SPR_US)
switch(lge_get_board_revno()) {
case HW_REV_A:
printk("%s: Sensor power is set as Rev.A, line:%d\n", __func__, __LINE__);
hi544_s_ctrl.power_setting_array.power_setting = hi544_power_setting_rev_a;
hi544_s_ctrl.power_setting_array.size = ARRAY_SIZE(hi544_power_setting_rev_a);
break;
case HW_REV_B:
printk("%s: Sensor power is set as Rev.B, line:%d\n", __func__, __LINE__);
hi544_s_ctrl.power_setting_array.power_setting = hi544_power_setting_rev_b;
hi544_s_ctrl.power_setting_array.size = ARRAY_SIZE(hi544_power_setting_rev_b);
break;
default:
printk("%s: Sensor power is set as Rev.10, line:%d\n", __func__, __LINE__);
hi544_s_ctrl.power_setting_array.power_setting = hi544_power_setting_rev_b;
hi544_s_ctrl.power_setting_array.size = ARRAY_SIZE(hi544_power_setting_rev_b);
break;
}
#else
printk("%s: Sensor power is set, line:%d\n", __func__, __LINE__);
hi544_s_ctrl.power_setting_array.power_setting = hi544_power_setting_rev_a;
hi544_s_ctrl.power_setting_array.size = ARRAY_SIZE(hi544_power_setting_rev_a);
#endif
rc = platform_driver_probe(&hi544_platform_driver,
hi544_platform_probe);
if (!rc)
return rc;
pr_info("%s:%d rc %d\n", __func__, __LINE__, rc);
return i2c_add_driver(&hi544_i2c_driver);
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via X5
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(gpio_func_sensor_configs, ARRAY_SIZE(gpio_func_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(gpio_func_i2c_configs, ARRAY_SIZE(gpio_func_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if(hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs));
printk(KERN_ERR "[Touch] synaptics msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
} else {
msm_gpiomux_install(msm_atmel_s540_configs, ARRAY_SIZE(msm_atmel_s540_configs));
printk(KERN_ERR "[Touch] atmel msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
}
// GPIO related function <<5.NFC>>
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
// GPIO related function <<6.LCD>>
msm_gpiomux_install(gpio_func_lcd_configs,
ARRAY_SIZE(gpio_func_lcd_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(gpio_func_battery_configs, ARRAY_SIZE(gpio_func_battery_configs));
// GPIO related function <<13.BT>>
msm_gpiomux_install(gpio_func_bt_configs, ARRAY_SIZE(gpio_func_bt_configs));
// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
// GPIO related function <<15.FM>>
msm_gpiomux_install(gpio_func_fm_configs, ARRAY_SIZE(gpio_func_fm_configs));
// GPIO related function <<16.WLC>>
msm_gpiomux_install(gpio_func_wlc_configs, ARRAY_SIZE(gpio_func_wlc_configs));
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<21.LOGIC>>
msm_gpiomux_install(gpio_func_logic_configs, ARRAY_SIZE(gpio_func_logic_configs));
#endif
#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [BT][[email protected]], 2013-05-13 */
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
/* LGE_CHANGE_E, [BT][[email protected]], 2013-05-13 */
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
#if 0//defined(CONFIG_TSPDRV)
msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif
msm_gpiomux_sdc3_install();
}
void __init msm8610_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
//2013-07-29, seungkyu.joo, add gpio85 config for revA[End]
hw_rev_type lge_bd_rev = lge_get_board_revno();
//2013-07-29, seungkyu.joo, add gpio85 config for revA[End]
#endif
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X10 GPIO Confiuration via W3
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.SIM>>
// GPIO related function <<17.SLIMBUS>>
// GPIO related function <<18.RF>>
// GPIO related function <<19.KEY PAD>>
// GPIO related function <<20.LOGIC>>
switch ( lge_bd_rev ){
case HW_REV_0 :{
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x10_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
msm_gpiomux_install(msm_sensor_configs_revA, ARRAY_SIZE(msm_sensor_configs_revA)); //
}
break;
case HW_REV_A :{
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x10_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
msm_gpiomux_install(msm_sensor_configs_revA, ARRAY_SIZE(msm_sensor_configs_revA)); //
}
break;
case HW_REV_B :
case HW_REV_C :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x10_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
msm_gpiomux_install(msm_sensor_configs_revB, ARRAY_SIZE(msm_sensor_configs_revB)); //
break;
case HW_REV_D :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_D[gpio_index] < MSM8x10_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
msm_gpiomux_install(msm_sensor_configs_revB, ARRAY_SIZE(msm_sensor_configs_revB)); //
break;
case HW_REV_E :
case HW_REV_1_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_1_0[gpio_index] < MSM8x10_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
msm_gpiomux_install(msm_sensor_configs_revB, ARRAY_SIZE(msm_sensor_configs_revB)); //
break;
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_1_0[gpio_index] < MSM8x10_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
msm_gpiomux_install(msm_sensor_configs_revB, ARRAY_SIZE(msm_sensor_configs_revB)); //
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
break;
}
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
if (of_board_is_qrd()) {
msm_gpiomux_install(msm_focaltech_configs,
ARRAY_SIZE(msm_focaltech_configs));
} else {
if(lge_bd_rev < HW_REV_E) {
printk(KERN_ERR "[TOUCH] Set GPIO for MELFAS \n");
msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
}else{
printk(KERN_ERR "[TOUCH] Set GPIO for greater than Rev.E \n");
msm_gpiomux_install(msm_syunap_configs, ARRAY_SIZE(msm_syunap_configs));
}
}
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(sd_card_det, ARRAY_SIZE(sd_card_det));
msm_gpiomux_install(msm_gpio_int_configs,
ARRAY_SIZE(msm_gpio_int_configs));
#if defined (CONFIG_LGE_BROADCAST_ONESEG)
if(lge_get_board_revno()>= HW_REV_B)
msm_gpiomux_install(lge_1seg_blsp_configs, ARRAY_SIZE(lge_1seg_blsp_configs));
else if(lge_get_board_revno()== HW_REV_A)
msm_gpiomux_install(lge_1seg_blsp_configs_revA, ARRAY_SIZE(lge_1seg_blsp_configs_revA));
else
msm_gpiomux_install(lge_1seg_blsp_configs_rev0, ARRAY_SIZE(lge_1seg_blsp_configs_rev0));
#endif /* */
#if defined(CONFIG_MACH_LGE) && defined(CONFIG_SWITCH_SPK_RCV)
//
msm_gpiomux_install(msm_spk_rcv_det,
ARRAY_SIZE(msm_spk_rcv_det));
#endif/* */
#ifdef CONFIG_FMR_INTENNA
//
msm_gpiomux_install(fmr_intenna_det,
ARRAY_SIZE(fmr_intenna_det));
#endif
}
void __init msm8610_init_gpiomux(void)
{
int rc;
hw_rev_type revision = lge_get_board_revno();
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
/* Touch IC Setting */
printk(KERN_INFO"[%s][TOUCH] HW_Revision = %d ", __func__, revision );
if(revision == HW_REV_A) //melfas
msm_gpiomux_install(mms100s_ts_configs, ARRAY_SIZE(mms100s_ts_configs));
else
msm_gpiomux_install(synaptics_configs, ARRAY_SIZE(synaptics_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(sd_card_det, ARRAY_SIZE(sd_card_det));
/* LGE_CHANGE_S, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
if(revision == HW_REV_0) {
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
printk(KERN_ERR " [Camera] below HW_REV_0 is using power source from PM\n");
}
else if(revision == HW_REV_A) {
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
printk(KERN_ERR " [Camera] greater than HW_REV_A is using power source from Ex-LDO used GPIO\n");
}
else {
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
}
/* LGE_CHANGE_E, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
msm_gpiomux_install(msm_gpio_int_configs,
ARRAY_SIZE(msm_gpio_int_configs));
#if defined (CONFIG_LGE_BROADCAST_ONESEG)
if(lge_get_board_revno()>= HW_REV_A) {
msm_gpiomux_install(lge_1seg_blsp_configs, ARRAY_SIZE(lge_1seg_blsp_configs));
printk(KERN_ERR " [Oneseg] In greater than HW_REV_A\n");
}
#endif /* CONFIG_LGE_BROADCAST_ONESEG */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up*/ #if defined(CONFIG_BU52061NVX) static struct msm_gpiomux_config msm_hall_ic_configs[] __initdata = { { .gpio = 4, .settings = { [GPIOMUX_ACTIVE] = &hall_ic_sus_cfg, }, }, #ifdef CONFIG_BU52033NVX_CARKIT { .gpio = 5, .settings = { [GPIOMUX_ACTIVE] = &hall_ic_sus_cfg, }, }, #endif }; #endif /* CONFIG_BU52061NVX */ void __init msm8226_init_gpiomux(void) { int rc; #ifdef CONFIG_MACH_LGE hw_rev_type hw_rev; hw_rev = lge_get_board_revno(); #endif /* CONFIG_MACH_LGE */ rc = msm_gpiomux_init_dt(); if (rc) { pr_err("%s failed %d\n", __func__, rc); return; } #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE) msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs)); #endif msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs)); msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs)); msm_gpiomux_install(wcnss_5wire_interface, ARRAY_SIZE(wcnss_5wire_interface)); msm_gpiomux_install(&sd_card_det, 1); #ifdef CONFIG_MACH_LGE if(hw_rev < HW_REV_A2) { msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs)); printk(KERN_ERR "[Touch] HW_REV_A configs \n"); } else if(hw_rev == HW_REV_A2) { #if defined(CONFIG_TOUCHSCREEN_LGE_TS_MISC) msm_gpiomux_install(msm_touch_configs_rev_a2, ARRAY_SIZE(msm_touch_configs_rev_a2)); printk(KERN_ERR "[Touch] HW_REV_A2 configs \n"); #endif /* CONFIG_TOUCHSCREEN_LGE_TS_MISC */ } else if(hw_rev >= HW_REV_B) { #if defined (CONFIG_LGE_TOUCHSCREEN_SYNAPTIC) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) msm_gpiomux_install(msm_touch_configs_rev_b, ARRAY_SIZE(msm_touch_configs_rev_b)); if(hw_rev == HW_REV_B) { printk(KERN_ERR "[Touch] HW_REV_B configs \n"); } else if (hw_rev >= HW_REV_B2) { printk(KERN_ERR "[Touch] over HW_REV_B2 configs \n"); } else {} #endif /* CONFIG_LGE_TOUCHSCREEN_SYNAPTIC || CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 */ } else {} #endif /* CONFIG_MACH_LGE */ #if defined(CONFIG_BU52061NVX) msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs)); #endif /* CONFIG_BU52061NVX */ msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs)); msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs)); #ifndef CONFIG_MACH_LGE msm_gpiomux_install(msm_auxpcm_configs, ARRAY_SIZE(msm_auxpcm_configs)); if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm()) msm_gpiomux_install(usb_otg_sw_configs, ARRAY_SIZE(usb_otg_sw_configs)); #endif /* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */ #ifdef CONFIG_LGE_NFC_PN547 msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs)); #endif /* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */ }
void __init msm8226_init_gpiomux(void)
{
int rc;
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
//--------------------------------------------
// MSM8X26 GPIO Confiuration via JAGUAR
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if (hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
printk(KERN_ERR "[Touch] HW_REV_0 configs \n");
} else {
msm_gpiomux_install(msm_synaptics_configs_rev_b, ARRAY_SIZE(msm_synaptics_configs_rev_b));
printk(KERN_ERR "[Touch] HW_REV_A.. configs \n");
}
// GPIO related function <<5.NFC>>
/* */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* */
// GPIO related function <<6.LCD>>
if (hw_rev <= HW_REV_A)
msm_gpiomux_install_nowrite(msm_lcd_configs_A,
ARRAY_SIZE(msm_lcd_configs_A));
else
msm_gpiomux_install_nowrite(msm_lcd_configs_B,
ARRAY_SIZE(msm_lcd_configs_B));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
msm_gpiomux_sdc3_install();
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* */
// GPIO related function <<14.WIFI>>
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
#else
if (hw_rev == HW_REV_0)
msm_gpiomux_install(wcnss_5wire_interface_zero,
ARRAY_SIZE(wcnss_5wire_interface_zero));
else
msm_gpiomux_install(wcnss_5wire_interface_A,
ARRAY_SIZE(wcnss_5wire_interface_A));
#endif
// GPIO related function <<15.FM>>
msm_gpiomux_install(msm_auxpcm_configs, ARRAY_SIZE(msm_auxpcm_configs));
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<21.LOGIC>>
logic_msm_gpiomux_install();
/* */
#if defined(CONFIG_LGE_BROADCAST_TDMB)
msm_gpiomux_install(msm8926_tdmb_configs, ARRAY_SIZE(msm8926_tdmb_configs));
#endif
/* */
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
#ifndef CONFIG_MACH_LGE
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
}
void __init apq8064_init_gpiomux(void)
{
int rc;
int platform_version = socinfo_get_platform_version();
#ifdef CONFIG_MACH_APQ8064_ALTEV
hw_rev_type lge_bd_rev = HW_REV_EVB1;//
#endif
rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return;
}
#ifdef CONFIG_SWITCH_MAX1462X
msm_gpiomux_install(apq8064_earjack_configs,
ARRAY_SIZE(apq8064_earjack_configs));
#endif
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
machine_is_mpq8064_dtv()) {
msm_gpiomux_install(mpq8064_gsbi5_i2c_configs,
ARRAY_SIZE(mpq8064_gsbi5_i2c_configs));
#ifdef CONFIG_MSM_VCAP
msm_gpiomux_install(vcap_configs,
ARRAY_SIZE(vcap_configs));
#endif
msm_gpiomux_install(sx150x_int_configs,
ARRAY_SIZE(sx150x_int_configs));
} else {
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(apq8064_ethernet_configs,
ARRAY_SIZE(apq8064_ethernet_configs));
#endif
msm_gpiomux_install(apq8064_gsbi_configs,
ARRAY_SIZE(apq8064_gsbi_configs));
#if !defined(CONFIG_MACH_LGE)
if (!(machine_is_apq8064_mtp() &&
(SOCINFO_VERSION_MINOR(platform_version) == 1)))
msm_gpiomux_install(apq8064_non_mi2s_gsbi_configs,
ARRAY_SIZE(apq8064_non_mi2s_gsbi_configs));
#endif
}
if (machine_is_apq8064_mtp() &&
(SOCINFO_VERSION_MINOR(platform_version) == 1)) {
msm_gpiomux_install(apq8064_mic_i2s_configs,
ARRAY_SIZE(apq8064_mic_i2s_configs));
msm_gpiomux_install(apq8064_spkr_i2s_configs,
ARRAY_SIZE(apq8064_spkr_i2s_configs));
msm_gpiomux_install(apq8064_mi2s_configs,
ARRAY_SIZE(apq8064_mi2s_configs));
msm_gpiomux_install(apq8064_gsbi1_i2c_2ma_configs,
ARRAY_SIZE(apq8064_gsbi1_i2c_2ma_configs));
} else {
msm_gpiomux_install(apq8064_slimbus_config,
ARRAY_SIZE(apq8064_slimbus_config));
msm_gpiomux_install(apq8064_gsbi1_i2c_8ma_configs,
ARRAY_SIZE(apq8064_gsbi1_i2c_8ma_configs));
}
#if defined(CONFIG_LGE_IRRC)
msm_gpiomux_install(apq8064_irrc_configs,
ARRAY_SIZE(apq8064_irrc_configs));
pr_debug("[IRRC] gpiomux_install");
#endif
#if defined(CONFIG_ANDROID_SW_IRRC)
msm_gpiomux_install(apq8064_irrc_tx_configs,
ARRAY_SIZE(apq8064_irrc_tx_configs));
pr_debug("[SW IRRC] gpiomux_install");
#endif
#if defined(CONFIG_SND_SOC_TPA2028D_DUAL_SPEAKER)
msm_gpiomux_install(apq8064_gsbi7_i2c_8ma_configs,
ARRAY_SIZE(apq8064_gsbi7_i2c_8ma_configs));
pr_debug("[DUAL AMP] gpiomux_install");
#endif
msm_gpiomux_install(apq8064_audio_codec_configs,
ARRAY_SIZE(apq8064_audio_codec_configs));
if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
machine_is_mpq8064_dtv()) {
msm_gpiomux_install(mpq8064_spkr_i2s_config,
ARRAY_SIZE(mpq8064_spkr_i2s_config));
}
pr_debug("%s(): audio-auxpcm: Include GPIO configs"
" as audio is not the primary user"
" for these GPIO Pins\n", __func__);
if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
machine_is_mpq8064_dtv())
msm_gpiomux_install(mpq8064_mi2s_configs,
ARRAY_SIZE(mpq8064_mi2s_configs));
// kyle00.choi, 20130402, To feature out the modem. [START]
#if defined(CONFIG_MODEM_SUPPORT)
if (machine_is_apq8064_mtp()) {
if (SOCINFO_VERSION_MINOR(platform_version) == 1)
msm_gpiomux_install(mdm_i2s_configs,
ARRAY_SIZE(mdm_i2s_configs));
}
#endif
// kyle00.choi, 20130402, To feature out the modem. [START]
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_apq8064_mtp()) {
if (SOCINFO_VERSION_MINOR(platform_version) == 1) {
msm_gpiomux_install(cyts_gpio_alt_config,
ARRAY_SIZE(cyts_gpio_alt_config));
} else {
msm_gpiomux_install(cyts_gpio_configs,
ARRAY_SIZE(cyts_gpio_configs));
}
}
if (machine_is_apq8064_mtp())
msm_gpiomux_install(apq8064_hsic_configs,
ARRAY_SIZE(apq8064_hsic_configs));
#endif
/* */
#if defined(CONFIG_LGE_NFC)
msm_gpiomux_install(apq8064_nfc_configs,
ARRAY_SIZE(apq8064_nfc_configs));
#endif
/* */
//
//
//ADD: 0019632: [F200][BT] Bluetooth board bring-up
#ifdef CONFIG_LGE_BLUESLEEP
msm_gpiomux_install(bt_pcm_configs,
ARRAY_SIZE(bt_pcm_configs));
msm_gpiomux_install(mpq8064_uartdm_configs,
ARRAY_SIZE(mpq8064_uartdm_configs));
/* msm_gpiomux_install(gsbi6_uart_configs,
ARRAY_SIZE(gsbi6_uart_configs)); */
msm_gpiomux_install(msm8960_bt_host_wakeup_configs,
ARRAY_SIZE(msm8960_bt_host_wakeup_configs));
msm_gpiomux_install(msm8960_bt_wakeup_configs,
ARRAY_SIZE(msm8960_bt_wakeup_configs));
#endif
//
//
if (machine_is_apq8064_cdp() || machine_is_apq8064_liquid())
msm_gpiomux_install(apq8064_mxt_configs,
ARRAY_SIZE(apq8064_mxt_configs));
msm_gpiomux_install(apq8064_hdmi_configs,
ARRAY_SIZE(apq8064_hdmi_configs));
//
//
#if defined (CONFIG_SLIMPORT_ANX7808)
msm_gpiomux_install(apq8064_slimport_configs,
ARRAY_SIZE(apq8064_slimport_configs));
pr_err("[Slimport] revision = %d gpiomux install complete!\n", lge_get_board_revno());
#endif
//
//
#if !defined (CONFIG_MACH_LGE)
if (apq8064_mhl_display_enabled())
msm_gpiomux_install(apq8064_mhl_configs,
ARRAY_SIZE(apq8064_mhl_configs));
#endif
if (machine_is_mpq8064_cdp())
msm_gpiomux_install(mpq8064_ir_configs,
ARRAY_SIZE(mpq8064_ir_configs));
#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
msm_gpiomux_install(apq8064_sdc2_configs,
ARRAY_SIZE(apq8064_sdc2_configs));
#else
msm_gpiomux_install(apq8064_sdc2_not_configs,
ARRAY_SIZE(apq8064_sdc2_not_configs));
#endif
#ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
msm_gpiomux_install(apq8064_sdc4_configs,
ARRAY_SIZE(apq8064_sdc4_configs));
#endif
msm_gpiomux_install(apq8064_sdc3_configs_chg,
ARRAY_SIZE(apq8064_sdc3_configs_chg));
#if defined(CONFIG_BATTERY_MAX17043) || defined(CONFIG_BATTERY_MAX17047) || defined(CONFIG_BATTERY_MAX17048)
msm_gpiomux_install(apq8064_fuel_gauge_configs,
ARRAY_SIZE(apq8064_fuel_gauge_configs));
#endif
#if defined(CONFIG_BQ24262_CHARGER)
msm_gpiomux_install(mpq8064_gsbi5_i2c_configs,
ARRAY_SIZE(mpq8064_gsbi5_i2c_configs));
#endif
//
}
static int power_set_pm8941_regulator(int onoff)
{
int rc = -1;
#if defined(CONFIG_MACH_MSM8974_VU3_KR)
if((lge_get_board_revno() == HW_REV_A)){
pm8941_power_reg = NULL;
printk("[T3A00]VU3 RevA does not support PMIC 1.8V\n");
return rc;
}
#endif
#if defined(CONFIG_MACH_MSM8974_Z_KR)
if((lge_get_board_revno() != HW_REV_C))
{
pm8941_power_reg = NULL;
printk("[T3A00]Z-KOR does not support PMIC 1.8V except Rev.C\n");
return rc;
}
#endif
if(!t3a00_ctrl_info.spi_ptr){
printk("[T3A00]T3A00 Contrl Block invalid\n");
return rc;
}
if(!pm8941_power_reg ) {
pm8941_power_reg = regulator_get(&t3a00_ctrl_info.spi_ptr->dev, "tdmb-vdd-io");
if(IS_ERR(pm8941_power_reg)) {
printk("%s: regulator get of pm8941 power failed in T3A00 (%ld)\n",
__func__, PTR_ERR(pm8941_power_reg));
rc = PTR_ERR(pm8941_power_reg);
pm8941_power_reg = NULL;
return rc;
}
}
if(onoff){
rc = regulator_set_voltage(pm8941_power_reg , 1800000, 1800000);
if(rc < 0 ) {
printk("[T3A00] %s: cannot control regulator pm8941 1.8V :%d\n", __func__, rc);
goto vreg_set_fail;
}
rc = regulator_enable(pm8941_power_reg);
if(rc < 0 ) {
printk("[T3A00] %s: cannot regulator enable %d\n", __func__, rc);
goto vreg_set_fail;
}
}else {
rc = regulator_disable(pm8941_power_reg);
if(rc < 0 ) {
printk("[T3A00] %s: cannot regulator enable %d\n", __func__, rc);
goto vreg_set_fail;
}
}
printk("[T3A00]pm8941 voltage contorl success mode =(%d)\n", onoff);
return rc;
vreg_set_fail:
regulator_put(pm8941_power_reg);
pm8941_power_reg = NULL;
return rc;
}
static int __devinit gdsc_probe(struct platform_device *pdev)
{
static atomic_t gdsc_count = ATOMIC_INIT(-1);
struct regulator_init_data *init_data;
struct resource *res;
struct gdsc *sc;
uint32_t regval;
bool retain_mem, retain_periph;
int i, ret;
#ifdef CONFIG_MACH_LGE
int use_lge_workaround = 0; /* default: all not applied */
#endif
sc = devm_kzalloc(&pdev->dev, sizeof(struct gdsc), GFP_KERNEL);
if (sc == NULL)
return -ENOMEM;
init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
if (init_data == NULL)
return -ENOMEM;
if (of_get_property(pdev->dev.of_node, "parent-supply", NULL))
init_data->supply_regulator = "parent";
ret = of_property_read_string(pdev->dev.of_node, "regulator-name",
&sc->rdesc.name);
if (ret)
return ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL)
return -EINVAL;
sc->gdscr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (sc->gdscr == NULL)
return -ENOMEM;
sc->clock_count = of_property_count_strings(pdev->dev.of_node,
"qcom,clock-names");
if (sc->clock_count == -EINVAL) {
sc->clock_count = 0;
} else if (IS_ERR_VALUE(sc->clock_count)) {
dev_err(&pdev->dev, "Failed to get clock names\n");
return -EINVAL;
}
sc->clocks = devm_kzalloc(&pdev->dev,
sizeof(struct clk *) * sc->clock_count, GFP_KERNEL);
if (!sc->clocks)
return -ENOMEM;
for (i = 0; i < sc->clock_count; i++) {
const char *clock_name;
of_property_read_string_index(pdev->dev.of_node,
"qcom,clock-names", i,
&clock_name);
sc->clocks[i] = devm_clk_get(&pdev->dev, clock_name);
if (IS_ERR(sc->clocks[i])) {
int rc = PTR_ERR(sc->clocks[i]);
if (rc != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to get %s\n",
clock_name);
return rc;
}
}
#ifdef CONFIG_MACH_LGE
of_property_read_u32(pdev->dev.of_node, "lge,use_workaround",
&use_lge_workaround);
sc->use_lge_workaround = !(!use_lge_workaround);
#endif
sc->rdesc.id = atomic_inc_return(&gdsc_count);
sc->rdesc.ops = &gdsc_ops;
sc->rdesc.type = REGULATOR_VOLTAGE;
sc->rdesc.owner = THIS_MODULE;
platform_set_drvdata(pdev, sc);
/*
* Disable HW trigger: collapse/restore occur based on registers writes.
* Disable SW override: Use hardware state-machine for sequencing.
*/
regval = readl_relaxed(sc->gdscr);
regval &= ~(HW_CONTROL_MASK | SW_OVERRIDE_MASK);
/* Configure wait time between states. */
regval &= ~(EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK);
regval |= EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL;
writel_relaxed(regval, sc->gdscr);
retain_mem = of_property_read_bool(pdev->dev.of_node,
"qcom,retain-mem");
retain_periph = of_property_read_bool(pdev->dev.of_node,
"qcom,retain-periph");
for (i = 0; i < sc->clock_count; i++) {
if (retain_mem || (regval & PWR_ON_MASK))
clk_set_flags(sc->clocks[i], CLKFLAG_RETAIN_MEM);
else
clk_set_flags(sc->clocks[i], CLKFLAG_NORETAIN_MEM);
if (retain_periph || (regval & PWR_ON_MASK))
clk_set_flags(sc->clocks[i], CLKFLAG_RETAIN_PERIPH);
else
clk_set_flags(sc->clocks[i], CLKFLAG_NORETAIN_PERIPH);
}
sc->toggle_mem = !retain_mem;
sc->toggle_periph = !retain_periph;
sc->toggle_logic = !of_property_read_bool(pdev->dev.of_node,
"qcom,skip-logic-collapse");
if (!sc->toggle_logic) {
#ifdef CONFIG_MACH_LGE
/* LGE workaround is not used if a device is good pdn revision */
if (lge_get_board_revno() >= use_lge_workaround) {
regval &= ~SW_COLLAPSE_MASK;
writel_relaxed(regval, sc->gdscr);
ret = readl_tight_poll_timeout(sc->gdscr, regval,
regval & PWR_ON_MASK, TIMEOUT_US);
if (ret) {
dev_err(&pdev->dev, "%s enable timed out\n",
sc->rdesc.name);
return ret;
}
} else {
pr_info("%s: %s is enabled only at first by lge workaround\n",
__func__, sc->rdesc.name);
ret = lge_gdsc_enable(sc);
if (ret) {
dev_err(&pdev->dev, "%s enable timed out\n",
sc->rdesc.name);
return ret;
}
}
#else /* qmc */
regval &= ~SW_COLLAPSE_MASK;
writel_relaxed(regval, sc->gdscr);
ret = readl_tight_poll_timeout(sc->gdscr, regval,
regval & PWR_ON_MASK, TIMEOUT_US);
if (ret) {
dev_err(&pdev->dev, "%s enable timed out\n",
sc->rdesc.name);
return ret;
}
#endif
}
sc->rdev = regulator_register(&sc->rdesc, &pdev->dev, init_data, sc,
pdev->dev.of_node);
if (IS_ERR(sc->rdev)) {
dev_err(&pdev->dev, "regulator_register(\"%s\") failed.\n",
sc->rdesc.name);
return PTR_ERR(sc->rdev);
}
return 0;
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif /* CONFIG_MACH_LGE */
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
#ifdef CONFIG_MACH_LGE
switch ( hw_rev ){
case HW_REV_0 :
case HW_REV_A :
case HW_REV_A2 :
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
}
break;
case HW_REV_B2 :
case HW_REV_C :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
}
break;
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
}
break;
}
if(hw_rev < HW_REV_A2) {
msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
printk(KERN_ERR "[Touch] HW_REV_A configs \n");
} else if(hw_rev == HW_REV_A2) {
#if defined(CONFIG_TOUCHSCREEN_LGE_TS_MISC)
msm_gpiomux_install(msm_touch_configs_rev_a2, ARRAY_SIZE(msm_touch_configs_rev_a2));
printk(KERN_ERR "[Touch] HW_REV_A2 configs \n");
#endif /* CONFIG_TOUCHSCREEN_LGE_TS_MISC */
} else if(hw_rev >= HW_REV_B) {
#if defined (CONFIG_LGE_TOUCHSCREEN_SYNAPTIC) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)
msm_gpiomux_install(msm_touch_configs_rev_b, ARRAY_SIZE(msm_touch_configs_rev_b));
if(hw_rev == HW_REV_B) {
printk(KERN_ERR "[Touch] HW_REV_B configs \n");
} else if (hw_rev >= HW_REV_B2) {
printk(KERN_ERR "[Touch] over HW_REV_B2 configs \n");
} else {}
#endif /* CONFIG_LGE_TOUCHSCREEN_SYNAPTIC || CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 */
} else {}
#endif /* CONFIG_MACH_LGE */
#if defined(CONFIG_BU52061NVX)
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#endif /* CONFIG_BU52061NVX */
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}
static int mipi_dsi_panel_power(int on)
{
static struct regulator *reg_l8, *reg_l2, *reg_lvs6, *ext_dsv_load;
static int gpio42;
int rc;
struct pm_gpio gpio42_param = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_CMOS,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_HIGH,
.function = PM_GPIO_FUNC_PAIRED,
.inv_int_pol = 0,
.disable_pin = 0,
};
printk(KERN_INFO"%s: mipi lcd function started status = %d \n", __func__, on);
pr_debug("%s: state : %d\n", __func__, on);
if (!dsi_power_on) {
gpio42 = PM8921_GPIO_PM_TO_SYS(42);
rc = gpio_request(gpio42, "disp_rst_n");
if (rc) {
pr_err("request gpio 42 failed, rc=%d\n", rc);
return -ENODEV;
}
if (lge_get_board_revno() > HW_REV_C) {
ext_dsv_load = regulator_get(NULL, "ext_dsv_load");
if (IS_ERR(ext_dsv_load)) {
pr_err("could not get ext_dsv_load, rc = %ld\n",
PTR_ERR(ext_dsv_load));
return -ENODEV;
}
}
reg_l8 = regulator_get(&msm_mipi_dsi1_device.dev, "dsi_vci");
if (IS_ERR(reg_l8)) {
pr_err("could not get 8921_l8, rc = %ld\n",
PTR_ERR(reg_l8));
return -ENODEV;
}
reg_lvs6 = regulator_get(&msm_mipi_dsi1_device.dev, "dsi_iovcc");
if (IS_ERR(reg_lvs6)) {
pr_err("could not get 8921_lvs6, rc = %ld\n",
PTR_ERR(reg_lvs6));
return -ENODEV;
}
reg_l2 = regulator_get(&msm_mipi_dsi1_device.dev, "dsi_vdda");
if (IS_ERR(reg_l2)) {
pr_err("could not get 8921_l2, rc = %ld\n",
PTR_ERR(reg_l2));
return -ENODEV;
}
rc = regulator_set_voltage(reg_l8, 3000000, 3000000);
if (rc) {
pr_err("set_voltage l8 failed, rc=%d\n", rc);
return -EINVAL;
}
rc = regulator_set_voltage(reg_l2, 1200000, 1200000);
if (rc) {
pr_err("set_voltage l2 failed, rc=%d\n", rc);
return -EINVAL;
}
dsi_power_on = true;
}
if (on) {
if (lge_get_board_revno() > HW_REV_C) {
rc = regulator_enable(ext_dsv_load);
if (rc) {
pr_err("enable ext_dsv_load failed, rc=%d\n", rc);
return -ENODEV;
}
}
rc = regulator_set_optimum_mode(reg_l8, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l8 failed, rc=%d\n", rc);
return -EINVAL;
}
rc = regulator_set_optimum_mode(reg_l2, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
#if defined(CONFIG_FB_MSM_MIPI_LGIT_VIDEO_WXGA_PT)
rc = regulator_enable(reg_l8); // dsi_vci
if (rc) {
pr_err("enable l8 failed, rc=%d\n", rc);
return -ENODEV;
}
udelay(100);
rc = regulator_enable(reg_lvs6); // IOVCC
if (rc) {
pr_err("enable lvs6 failed, rc=%d\n", rc);
return -ENODEV;
}
udelay(100);
#endif
rc = regulator_enable(reg_l2); // DSI
if (rc) {
pr_err("enable l2 failed, rc=%d\n", rc);
return -ENODEV;
}
printk(KERN_INFO " %s : reset start.", __func__);
/* LCD RESET HIGH */
mdelay(2);
gpio42_param.output_value = 1;
rc = pm8xxx_gpio_config(gpio42,&gpio42_param);
if (rc) {
pr_err("gpio_config 42 failed (3), rc=%d\n", rc);
return -EINVAL;
}
mdelay(5);
} else {
/* LCD RESET LOW */
gpio42_param.output_value = 0;
rc = pm8xxx_gpio_config(gpio42,&gpio42_param);
if (rc) {
pr_err("gpio_config 42 failed, rc=%d\n", rc);
return -ENODEV;
}
udelay(100);
#if defined(CONFIG_FB_MSM_MIPI_LGIT_VIDEO_WXGA_PT)
rc = regulator_disable(reg_lvs6); // IOVCC
if (rc) {
pr_err("disable lvs6 failed, rc=%d\n", rc);
return -ENODEV;
}
udelay(100);
rc = regulator_disable(reg_l8); //VCI
if (rc) {
pr_err("disable reg_l8 failed, rc=%d\n", rc);
return -ENODEV;
}
udelay(100);
#endif
rc = regulator_disable(reg_l2); //DSI
if (rc) {
pr_err("disable reg_l2 failed, rc=%d\n", rc);
return -ENODEV;
}
rc = regulator_set_optimum_mode(reg_l8, 100);
if (rc < 0) {
pr_err("set_optimum_mode l8 failed, rc=%d\n", rc);
return -EINVAL;
}
rc = regulator_set_optimum_mode(reg_l2, 100);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
if (lge_get_board_revno() > HW_REV_C) {
rc = regulator_disable(ext_dsv_load);
if (rc) {
pr_err("disable ext_dsv_load failed, rc=%d\n", rc);
return -ENODEV;
}
}
}
return 0;
}
static char mipi_dsi_splash_is_enabled(void)
{
return mdp_pdata.cont_splash_enabled;
}
static struct mipi_dsi_platform_data mipi_dsi_pdata = {
.dsi_power_save = mipi_dsi_panel_power,
.splash_is_enabled = mipi_dsi_splash_is_enabled,
};
static struct msm_bus_vectors dtv_bus_init_vectors[] = {
{
.src = MSM_BUS_MASTER_MDP_PORT0,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 0,
.ib = 0,
},
};
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
//int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
// GPIO related function <<7.CAMERA>>
/* LGE_CHANGE_S, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
/* LGE_CHANGE_E, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs,
ARRAY_SIZE(gpio_func_flash_led_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
printk(KERN_ERR "[Touch] HW_REV_0 \n");
} else if (hw_rev == HW_REV_A) {
msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
printk(KERN_ERR "[Touch] HW_REV_A \n");
} else {
msm_gpiomux_install(msm_atmel_configs_rev_b, ARRAY_SIZE(msm_atmel_configs_rev_b));
printk(KERN_ERR "[Touch] HW_REV_B or above \n");
}
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
#if defined(CONFIG_TSPDRV)
msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via X5
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
case HW_REV_A :
case HW_REV_B :
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_10[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_10[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(gpio_func_sensor_configs, ARRAY_SIZE(gpio_func_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
msm_gpiomux_install(msm_cap_sensor_configs, ARRAY_SIZE(msm_cap_sensor_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(gpio_func_i2c_configs, ARRAY_SIZE(gpio_func_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if(hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
printk(KERN_ERR " [Touch] HW_REV_0 for Atmel Touch IC \n");
} else if(hw_rev == HW_REV_A){
msm_gpiomux_install(msm_atmel_configs_rev_A, ARRAY_SIZE(msm_atmel_configs_rev_A));
printk(KERN_ERR " [Touch] HW_REV A for Atmel Touch IC \n");
}
else {
msm_gpiomux_install(msm_atmel_configs_rev_B, ARRAY_SIZE(msm_atmel_configs_rev_B));
printk(KERN_ERR " [Touch] HW_REV B for Atmel Touch IC \n");
}
// GPIO related function <<5.NFC>>
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
// GPIO related function <<6.LCD>>
msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install_nowrite(msm_bl_configs, ARRAY_SIZE(msm_bl_configs));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<9.IRRC>>
msm_gpiomux_install(gpio_func_irrc_configs,
ARRAY_SIZE(gpio_func_irrc_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(gpio_func_battery_configs, ARRAY_SIZE(gpio_func_battery_configs));
// GPIO related function <<13.BT>>
msm_gpiomux_install(gpio_func_bt_configs, ARRAY_SIZE(gpio_func_bt_configs));
// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
// GPIO related function <<15.FM>>
msm_gpiomux_install(gpio_func_fm_configs, ARRAY_SIZE(gpio_func_fm_configs));
// GPIO related function <<16.WLC>>
msm_gpiomux_install(gpio_func_wlc_configs, ARRAY_SIZE(gpio_func_wlc_configs));
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<21.LOGIC>>
msm_gpiomux_install(gpio_func_logic_configs, ARRAY_SIZE(gpio_func_logic_configs));
#endif
}
void __init msm8610_init_gpiomux(void)
{
int rc;
hw_rev_type revision = lge_get_board_revno();
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
printk(KERN_INFO"[%s][TOUCH] HW_Revision = %d ", __func__, revision );
/* Touch gpio Mux */
if(revision == HW_REV_A)/*For Incell Touch*/
{
msm_gpiomux_install(aps_ts_configs, ARRAY_SIZE(aps_ts_configs));
msm_gpiomux_install(ags04_ts_configs, ARRAY_SIZE(ags04_ts_configs));
}
else if(revision == HW_REV_B)
msm_gpiomux_install(mms100s_ts_configs, ARRAY_SIZE(mms100s_ts_configs));
else if(revision == HW_REV_C)
msm_gpiomux_install(mms100s_ts_configs_rev_c, ARRAY_SIZE(mms100s_ts_configs_rev_c));
else
msm_gpiomux_install(synaptics_configs, ARRAY_SIZE(synaptics_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if(revision == HW_REV_B) {
msm_gpiomux_install(sd_card_det_rev_b, ARRAY_SIZE(sd_card_det));
} else {
msm_gpiomux_install(sd_card_det, ARRAY_SIZE(sd_card_det));
}
/* */
if(revision == HW_REV_0) {
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
printk(KERN_ERR " [Camera] below HW_REV_0 is using power source from PM\n");
}
else if(revision == HW_REV_A) {
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
printk(KERN_ERR " [Camera] greater than HW_REV_A is using power source from Ex-LDO used GPIO\n");
}
else {
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
}
/* */
msm_gpiomux_install(msm_gpio_int_configs,
ARRAY_SIZE(msm_gpio_int_configs));
/* */
#ifdef CONFIG_LGE_NFC_PN547
if (revision <= HW_REV_B){
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
}
else{
msm_gpiomux_install(msm_nfc_configs_rev_c, ARRAY_SIZE(msm_nfc_configs_rev_c));
}
#endif
/* */
}
