void __init msm8226_htc_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
msm_gpiomux_install(msm_slimbus_config,
ARRAY_SIZE(msm_slimbus_config));
msm_gpiomux_install(msm_aud_configs,
ARRAY_SIZE(msm_aud_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_sdc3_install();
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119;
msm_hsic_configs[1].gpio = 120;
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT)
msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#endif
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_BERLUTI3G_EUR)
if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
if ( system_rev >= 0 && system_rev < 5)
#endif
{
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
}
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
msm_gpiomux_install(hs_uart_sw_configs, ARRAY_SIZE(hs_uart_sw_configs));
msm_gpiomux_sdc3_install();
msm_gpiomux_extovp_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
/* Battery charging and BMS GPIO */
msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
#if defined (CONFIG_SEC_ATLANTICLTE_COMMON)
msm_gpiomux_install(msm_lte_chg_configs, ARRAY_SIZE(msm_lte_chg_configs));
#endif
#if defined (CONFIG_SEC_ATLANTIC_PROJECT)
msm_gpiomux_install(msm_chg_det_configs, ARRAY_SIZE(msm_chg_det_configs));
#endif
#if !defined (CONFIG_MACH_ATLANTIC3GEUR_OPEN)
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
#if defined(CONFIG_SEC_ATLANTICLTE_COMMON)
msm_gpiomux_install(expander_configs,
ARRAY_SIZE(expander_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
msm_gpiomux_install(msm_cypress_configs,
ARRAY_SIZE(msm_cypress_configs));
msm_gpiomux_install(msm_keyboad_cypress_configs,
ARRAY_SIZE(msm_keyboad_cypress_configs));
#else
msm_gpiomux_install(msm_cypress_configs,
ARRAY_SIZE(msm_cypress_configs));
#endif
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
if (system_rev >= 1)
msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
else
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
#ifdef CONFIG_SENSORS_VFS61XX
msm_gpiomux_install(msm_fingerprint_configs, ARRAY_SIZE(msm_fingerprint_configs));
#endif
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
/*
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
*/
msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_ES325_ATLANTIC
msm_gpiomux_install(msm_es325_config, ARRAY_SIZE(msm_es325_config));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
#if defined (CONFIG_MACH_ATLANTIC3GEUR_OPEN)
msm_gpiomux_install(nc_configs, ARRAY_SIZE(nc_configs));
#endif
/* Install HW_REV GPIO configurations */
msm_gpiomux_install(atlantic_hw_rev_cfgs, ARRAY_SIZE(atlantic_hw_rev_cfgs));
/* Install NC GPIO configurations */
#if defined(CONFIG_MACH_ATLANTICLTE_ATT)
msm_gpiomux_install(atlantic_att_nc_gpios, ARRAY_SIZE(atlantic_att_nc_gpios));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_MS01_CHN_CTC) \
|| defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
msm_gpiomux_install(msm_hall_configs,
ARRAY_SIZE(msm_hall_configs));
#endif
if (of_board_is_qrd())
msm_gpiomux_install(msm_qrd_blsp_configs,
ARRAY_SIZE(msm_qrd_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MS01_CHN_CTC) \
|| defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
msm_gpiomux_install(msm8226_tx_gtr_configs,
ARRAY_SIZE(msm8226_tx_gtr_configs));
msm_gpiomux_install(muic_i2c_configs,
ARRAY_SIZE(muic_i2c_configs));
#endif
if (of_board_is_qrd())
msm_gpiomux_install(msm_qrd_goodix_configs,
ARRAY_SIZE(msm_qrd_goodix_configs));
else
#if defined(CONFIG_TOUCHSCREEN_ZINITIX_BT531)
msm_gpiomux_install(msm_zinitixs_configs,
ARRAY_SIZE(msm_zinitixs_configs));
#elif defined(CONFIG_TOUCHSCREEN_ATMEL_MXTS)
msm_gpiomux_install(msm_atmel_configs,
ARRAY_SIZE(msm_atmel_configs));
#elif defined(CONFIG_TOUCHSCREEN_MMS144)
msm_gpiomux_install(msm_melfas_configs,
ARRAY_SIZE(msm_melfas_configs));
#else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
#endif
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
#if defined(CONFIG_FB_MSM_MDSS_SHARP_HD_PANEL)\
|| defined(CONFIG_MACH_MILLET3G_EUR)
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
#endif
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
/*
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
*/
#if defined(CONFIG_MACH_MILLET3G_EUR)
msm_gpiomux_install(msm_speaker_enable_gpio_configs, ARRAY_SIZE(msm_speaker_enable_gpio_configs));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#else
msm_gpiomux_install(msm_nc_configs,
ARRAY_SIZE(msm_nc_configs));
#endif
#if defined(CONFIG_YAS_ACC_DRIVER_BMA250) || defined(CONFIG_INPUT_MPU6500) || \
defined(CONFIG_PROXIMITY_SENSOR) || defined (CONFIG_SENSORS_HSCDTD008A)
msm_gpiomux_install(msm_sensors_configs,
ARRAY_SIZE(msm_sensors_configs));
#endif
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
msm_gpiomux_install(an30259a_led_config,
ARRAY_SIZE(an30259a_led_config));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)||defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ)
msm_gpiomux_install(msm8226_nc_gpio_cfgs, ARRAY_SIZE(msm8226_nc_gpio_cfgs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#if defined(CONFIG_MACH_MS01_EUR_3G)
msm_gpiomux_install(ms01_nc_gpio_cfgs, ARRAY_SIZE(ms01_nc_gpio_cfgs));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
if ( system_rev >= 4 ) {
msm_gpiomux_install(ms01_ctc_nc_gpio_cfgs, ARRAY_SIZE(ms01_ctc_nc_gpio_cfgs));
}
#elif defined(CONFIG_MACH_CRATERQ)
msm_gpiomux_install(craterq_gpio_configs, ARRAY_SIZE(craterq_gpio_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
/* Battery charging and BMS GPIO */
msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
msm_gpiomux_install(msm_hrm_configs,
ARRAY_SIZE(msm_hrm_configs));
msm_gpiomux_install(msm_sensorhub_configs,
ARRAY_SIZE(msm_sensorhub_configs));
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
/*
* gpio mux settings for the NC GPIOs
*/
msm_gpiomux_install(nc_gpio_cfgs,
ARRAY_SIZE(nc_gpio_cfgs));
msm_gpiomux_install(hw_chkbits_cfg, ARRAY_SIZE(hw_chkbits_cfg));
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
}
void __init msm8226_htc_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
//htc audio ++
msm_gpiomux_install(msm_slimbus_config,
ARRAY_SIZE(msm_slimbus_config));
msm_gpiomux_install(msm_aud_configs,
ARRAY_SIZE(msm_aud_configs));
//htc audio --
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
#if 0 /* it will make gpio low and fail to get batt_id */
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
msm_gpiomux_sdc3_install();
msm_gpiomux_install(debug_uart_configs, ARRAY_SIZE(debug_uart_configs));
msm_gpiomux_install(ncgpio_configs, ARRAY_SIZE(ncgpio_configs));
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}
