static void msm8960_ext_spk_power_amp_off(u32 spk)
{
if (spk & (SPK_AMP_POS | SPK_AMP_NEG)) {
if (!msm8930_ext_spk_pamp)
return;
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
gpio_free(LEFT_SPKR_AMPL_GPIO);
msm8930_ext_spk_pamp = 0;
return;
}
if (machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid()) {
pr_debug("%s: Free speaker boost gpio %u\n",
__func__, SPKR_BOOST_GPIO);
gpio_direction_output(SPKR_BOOST_GPIO, 0);
gpio_free(SPKR_BOOST_GPIO);
}
pm8xxx_spk_enable(MSM8930_SPK_OFF);
msm8930_ext_spk_pamp = 0;
pr_debug("%s: slepping 10 ms after turning on external "
" Left Speaker Ampl\n", __func__);
usleep_range(10000, 10000);
} else {
pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n",
__func__, spk);
return;
}
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
#if 0
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
return sglte8930_init_gpiomux();
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
msm_gpiomux_install(msm8960_audio_mbhc_configs,
ARRAY_SIZE(msm8960_audio_mbhc_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
#ifdef MSM8930_PHASE_2
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif
}
if (PLATFORM_IS_CHARM25())
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
msm_gpiomux_install(msm8960_hdmi_configs,
ARRAY_SIZE(msm8960_hdmi_configs));
if (machine_is_msm8930_fluid())
msm_gpiomux_install(msm8930_mhl_configs,
ARRAY_SIZE(msm8930_mhl_configs));
#endif
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
msm_gpiomux_install(msm8930_sd_det_config,
ARRAY_SIZE(msm8930_sd_det_config));
return 0;
}
static void msm8960_ext_spk_power_amp_off(u32 spk)
{
// int ret = 0; // chenjun
if (spk & (SPK_AMP_POS | SPK_AMP_NEG)) {
if (!msm8930_ext_spk_pamp)
return;
#if 0
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
gpio_free(LEFT_SPKR_AMPL_GPIO);
msm8930_ext_spk_pamp = 0;
return;
}
if (machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid()) {
pr_debug("%s: Free speaker boost gpio %u\n",
__func__, SPKR_BOOST_GPIO);
gpio_direction_output(SPKR_BOOST_GPIO, 0);
gpio_free(SPKR_BOOST_GPIO);
} else if (socinfo_get_platform_subtype() ==
PLATFORM_SUBTYPE_SGLTE) {
ret = pm8xxx_gpio_config(spkr_boost_enable_gpio,
&SPKR_OFF);
if (ret) {
pr_err("%s: Failure: spkr boost gpio OFF %u\n",
__func__, spkr_boost_enable_gpio);
return;
} else {
pr_debug("%s:Config PMIC8038 gpio for speaker" \
" OFF successfully\n", __func__);
}
}
pm8xxx_spk_enable(MSM8930_SPK_OFF);
#else
// chenjun:gpio 14 and 19 are used for speaker amplifier
gpio_direction_output(YDA_SPKR_EN0_GPIO, 0);
gpio_free(YDA_SPKR_EN0_GPIO);
pr_err("chenjun:%s:disable SPKR EN0(%d)\n",
__func__, YDA_SPKR_EN0_GPIO);
gpio_direction_output(YDA_SPKR_EN1_GPIO, 0);
gpio_free(YDA_SPKR_EN1_GPIO);
pr_err("chenjun:%s:disable SPKR EN1(%d)\n",
__func__, YDA_SPKR_EN1_GPIO);
#endif
msm8930_ext_spk_pamp = 0;
pr_debug("%s: slepping 4 ms after turning on external "
" Left Speaker Ampl\n", __func__);
usleep_range(4000, 4000);
} else {
pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n",
__func__, spk);
return;
}
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
msm_gpiomux_install(msm8960_atmel_configs,
ARRAY_SIZE(msm8960_atmel_configs));
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
if (system_rev == 0) {
#if 0
msm_gpiomux_install(msm8960_i2s_tx_configs,
ARRAY_SIZE(msm8960_i2s_tx_configs));
#endif
} else {
#if 0
msm_gpiomux_install(msm8960_i2s_XB_tx_configs,
ARRAY_SIZE(msm8960_i2s_XB_tx_configs));
#endif
msm_gpiomux_install(msm8960_mi2s_configs,
ARRAY_SIZE(msm8960_mi2s_configs));
}
msm_gpiomux_install(msm8960_wcd_reset_configs, ARRAY_SIZE(msm8960_wcd_reset_configs));
msm_gpiomux_install(msm8960_audio_auxpcm_configs,
ARRAY_SIZE(msm8960_audio_auxpcm_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
#ifdef MSM8930_PHASE_2
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif
}
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
return 0;
}
static void msm8960_ext_spk_power_amp_on(u32 spk)
{
int ret = 0;
if (spk & (SPK_AMP_POS | SPK_AMP_NEG)) {
if ((msm8930_ext_spk_pamp & SPK_AMP_POS) &&
(msm8930_ext_spk_pamp & SPK_AMP_NEG)) {
pr_debug("%s() External Bottom Speaker Ampl already "
"turned on. spk = 0x%08x\n", __func__, spk);
return;
}
msm8930_ext_spk_pamp |= spk;
if ((msm8930_ext_spk_pamp & SPK_AMP_POS) &&
(msm8930_ext_spk_pamp & SPK_AMP_NEG)) {
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
ret = msm8930_cfg_spkr_gpio(
LEFT_SPKR_AMPL_GPIO,
1, "LEFT_SPKR_AMPL");
if (ret) {
pr_err("%s: Failed to config ampl gpio %u\n",
__func__, LEFT_SPKR_AMPL_GPIO);
return;
}
} else {
if (machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid()) {
ret = msm8930_cfg_spkr_gpio(
SPKR_BOOST_GPIO, 1, "SPKR_BOOST");
if (ret) {
pr_err("%s: Failure: spkr boost gpio %u\n",
__func__, SPKR_BOOST_GPIO);
return;
}
}
pm8xxx_spk_enable(MSM8930_SPK_ON);
}
pr_debug("%s: sleeping 10 ms after turning on external "
" Left Speaker Ampl\n", __func__);
usleep_range(10000, 10000);
}
} else {
pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n",
__func__, spk);
return;
}
}
static void msm8960_ext_spk_power_amp_on(u32 spk)
{
int ret = 0;
if (spk & (SPK_AMP_POS | SPK_AMP_NEG)) {
if ((msm8930_ext_spk_pamp & SPK_AMP_POS) &&
(msm8930_ext_spk_pamp & SPK_AMP_NEG)) {
pr_debug("%s() External Bottom Speaker Ampl already "
"turned on. spk = 0x%08x\n", __func__, spk);
return;
}
msm8930_ext_spk_pamp |= spk;
if ((msm8930_ext_spk_pamp & SPK_AMP_POS) &&
(msm8930_ext_spk_pamp & SPK_AMP_NEG)) {
if (machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid()) {
pr_debug("%s: Configure Speaker Boost GPIO %u",
__func__, SPKR_BOOST_GPIO);
ret = gpio_request(SPKR_BOOST_GPIO,
"SPKR_BOOST_EN");
if (ret) {
pr_err("%s: Failed to configure speaker boost "
"gpio %u\n", __func__, SPKR_BOOST_GPIO);
return;
}
pr_debug("%s: Enable Speaker boost gpio %u\n",
__func__, SPKR_BOOST_GPIO);
gpio_direction_output(SPKR_BOOST_GPIO, 1);
}
pm8xxx_spk_enable(MSM8930_SPK_ON);
pr_debug("%s: slepping 4 ms after turning on external "
" Left Speaker Ampl\n", __func__);
usleep_range(4000, 4000);
}
} else {
pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n",
__func__, spk);
return;
}
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
msm_gpiomux_install(msm8960_atmel_configs,
ARRAY_SIZE(msm8960_atmel_configs));
#ifdef CONFIG_2MIC_ES305
msm_gpiomux_install(audience_suspend_configs,
ARRAY_SIZE(audience_suspend_configs));
#endif
#ifdef CONFIG_SLIMBUS_MSM_CTRL
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
msm_gpiomux_install(msm8960_audio_mbhc_configs,
ARRAY_SIZE(msm8960_audio_mbhc_configs));
#else
if (system_rev < CLK_REVISION) {
msm_gpiomux_install(msm8960_audio_i2s_rx_codec_configs_rev10,
ARRAY_SIZE(msm8960_audio_i2s_rx_codec_configs_rev10));
msm_gpiomux_install(msm8960_audio_i2s_tx_codec_configs_rev10,
ARRAY_SIZE(msm8960_audio_i2s_tx_codec_configs_rev10));
} else {
msm_gpiomux_install(msm8960_audio_i2s_rx_codec_configs,
ARRAY_SIZE(msm8960_audio_i2s_rx_codec_configs));
msm_gpiomux_install(msm8960_audio_i2s_tx_codec_configs,
ARRAY_SIZE(msm8960_audio_i2s_tx_codec_configs));
}
#endif
msm_gpiomux_install(msm8960_audio_spkr_configs,
ARRAY_SIZE(msm8960_audio_spkr_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
#ifdef MSM8930_PHASE_2
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif
}
if (PLATFORM_IS_CHARM25())
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
msm_gpiomux_install(msm8960_hdmi_configs,
ARRAY_SIZE(msm8960_hdmi_configs));
#endif
#if defined(CONFIG_VIDEO_MHL_V2)
msm_gpiomux_install(msm8930_mhl_configs,
ARRAY_SIZE(msm8930_mhl_configs));
#endif
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
msm_gpiomux_install(gpio_keys_config_mux,
ARRAY_SIZE(gpio_keys_config_mux));
#ifdef CONFIG_USB_SWITCH_FSA9485
msm_gpiomux_install(msm8960_fsa9485_configs,
ARRAY_SIZE(msm8960_fsa9485_configs));
#endif
msm_gpiomux_install(msm8930_leds_configs,
ARRAY_SIZE(msm8930_leds_configs));
msm_gpiomux_install(msm8930_sd_det_config,
ARRAY_SIZE(msm8930_sd_det_config));
return 0;
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
msm_gpiomux_install(msm8960_atmel_configs,
ARRAY_SIZE(msm8960_atmel_configs));
#ifdef CONFIG_2MIC_ES305
msm_gpiomux_install(audience_suspend_configs,
ARRAY_SIZE(audience_suspend_configs));
#endif
#ifdef CONFIG_SLIMBUS_MSM_CTRL
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
msm_gpiomux_install(msm8960_audio_mbhc_configs,
ARRAY_SIZE(msm8960_audio_mbhc_configs));
#else
if (system_rev < CLK_REVISION) {
msm_gpiomux_install(msm8960_audio_i2s_rx_codec_configs_rev10,
ARRAY_SIZE(msm8960_audio_i2s_rx_codec_configs_rev10));
msm_gpiomux_install(msm8960_audio_i2s_tx_codec_configs_rev10,
ARRAY_SIZE(msm8960_audio_i2s_tx_codec_configs_rev10));
} else {
msm_gpiomux_install(msm8960_audio_i2s_rx_codec_configs,
ARRAY_SIZE(msm8960_audio_i2s_rx_codec_configs));
msm_gpiomux_install(msm8960_audio_i2s_tx_codec_configs,
ARRAY_SIZE(msm8960_audio_i2s_tx_codec_configs));
}
#endif
msm_gpiomux_install(msm8960_audio_spkr_configs,
ARRAY_SIZE(msm8960_audio_spkr_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (PLATFORM_IS_CHARM25())
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
msm_gpiomux_install(msm8960_hdmi_configs,
ARRAY_SIZE(msm8960_hdmi_configs));
#endif
#if defined(CONFIG_VIDEO_MHL_V2)
msm_gpiomux_install(msm8930_mhl_configs,
ARRAY_SIZE(msm8930_mhl_configs));
#endif
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
msm_gpiomux_install(gpio_keys_config_mux,
ARRAY_SIZE(gpio_keys_config_mux));
#ifdef CONFIG_USB_SWITCH_TSU6721
msm_gpiomux_install(msm8930_tsu6721_configs,
ARRAY_SIZE(msm8930_tsu6721_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
msm_gpiomux_install(msm8930_leds_configs,
ARRAY_SIZE(msm8930_leds_configs));
#endif
#if defined(CONFIG_MACH_CRATER)
msm_gpiomux_install(msm8930_sd_det_config,
ARRAY_SIZE(msm8930_sd_det_config));
#endif
#if defined(CONFIG_MACH_SERRANO_EUR_LTE) || defined(CONFIG_MACH_SERRANO_EUR_3G) || defined(CONFIG_MACH_SERRANO_ATT) || defined(CONFIG_MACH_SERRANO_SPR) || defined(CONFIG_MACH_SERRANO_VZW) || defined(CONFIG_MACH_SERRANO_USC) || defined(CONFIG_MACH_SERRANO_LRA)
msm_gpiomux_install(nc_configs, ARRAY_SIZE(nc_configs));
#endif
#if defined(CONFIG_MACH_SERRANO_EUR_LTE) || defined(CONFIG_MACH_SERRANO_ATT) || defined(CONFIG_MACH_SERRANO_SPR) || defined(CONFIG_MACH_SERRANO_VZW) || defined(CONFIG_MACH_SERRANO_USC) || defined(CONFIG_MACH_SERRANO_LRA)
msm_gpiomux_install(msm8930_nfc_enable_config,ARRAY_SIZE(msm8930_nfc_enable_config));
#endif
if (machine_is_msm8930_fluid() || machine_is_msm8930_mtp())
msm_gpiomux_install(msm8930_gyro_int_config,
ARRAY_SIZE(msm8930_gyro_int_config));
msm_gpiomux_install(msm_sitar_config, ARRAY_SIZE(msm_sitar_config));
return 0;
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
msm_gpiomux_install(msm8960_atmel_configs,
ARRAY_SIZE(msm8960_atmel_configs));
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
msm_gpiomux_install(msm8960_audio_mbhc_configs,
ARRAY_SIZE(msm8960_audio_mbhc_configs));
msm_gpiomux_install(msm8960_audio_spkr_configs,
ARRAY_SIZE(msm8960_audio_spkr_configs));
msm_gpiomux_install(msm8960_audio_auxpcm_configs,
ARRAY_SIZE(msm8960_audio_auxpcm_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
#ifdef MSM8930_PHASE_2
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif
}
if (PLATFORM_IS_CHARM25())
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
if (machine_is_msm8930_cdp() || machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid())
msm_gpiomux_install(msm8930_haptics_configs,
ARRAY_SIZE(msm8930_haptics_configs));
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
msm_gpiomux_install(msm8960_hdmi_configs,
ARRAY_SIZE(msm8960_hdmi_configs));
#endif
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
msm_gpiomux_install(msm8930_sd_det_config,
ARRAY_SIZE(msm8930_sd_det_config));
return 0;
}
static void msm8960_ext_spk_power_amp_on(u32 spk)
{
int ret = 0;
if (spk & (SPK_AMP_POS | SPK_AMP_NEG)) {
if ((msm8930_ext_spk_pamp & SPK_AMP_POS) &&
(msm8930_ext_spk_pamp & SPK_AMP_NEG)) {
pr_debug("%s() External Bottom Speaker Ampl already "
"turned on. spk = 0x%08x\n", __func__, spk);
return;
}
msm8930_ext_spk_pamp |= spk;
if ((msm8930_ext_spk_pamp & SPK_AMP_POS) &&
(msm8930_ext_spk_pamp & SPK_AMP_NEG)) {
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
ret = msm8930_cfg_spkr_gpio(
LEFT_SPKR_AMPL_GPIO,
1, "LEFT_SPKR_AMPL");
if (ret) {
pr_err("%s: Failed to config ampl gpio %u\n",
__func__, LEFT_SPKR_AMPL_GPIO);
return;
}
} else {
if (machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid()) {
ret = msm8930_cfg_spkr_gpio(
SPKR_BOOST_GPIO, 1, "SPKR_BOOST");
if (ret) {
pr_err("%s: Failure: spkr boost gpio %u\n",
__func__, SPKR_BOOST_GPIO);
return;
}
} else if (socinfo_get_platform_subtype() ==
PLATFORM_SUBTYPE_SGLTE) {
ret = pm8xxx_gpio_config(
spkr_boost_enable_gpio,
&SPKR_ON);
if (ret) {
pr_err("%s: Failure: spkr" \
"boost gpio ON %u\n",
__func__, spkr_boost_enable_gpio);
return;
} else {
pr_debug("%s:Config PMIC8038" \
"gpio for speaker ON successfully\n",
__func__);
}
}
pm8xxx_spk_enable(MSM8930_SPK_ON);
}
pr_debug("%s: slepping 4 ms after turning on external "
" Left Speaker Ampl\n", __func__);
usleep_range(4000, 4000);
}
} else {
pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n",
__func__, spk);
return;
}
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
/*
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
*/
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
msm_gpiomux_install(msm8960_atmel_configs,
ARRAY_SIZE(msm8960_atmel_configs));
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
//HTC_AUD ++
if (system_rev == 0) {
/* XA board */
msm_gpiomux_install(msm8960_i2s_tx_configs,
ARRAY_SIZE(msm8960_i2s_tx_configs));
} else {
/* XB board */
msm_gpiomux_install(msm8960_i2s_XB_tx_configs,
ARRAY_SIZE(msm8960_i2s_XB_tx_configs));
msm_gpiomux_install(msm8960_mi2s_configs,
ARRAY_SIZE(msm8960_mi2s_configs));
}
msm_gpiomux_install(msm8960_wcd_reset_configs, ARRAY_SIZE(msm8960_wcd_reset_configs));
//HTC_AUD --
msm_gpiomux_install(msm8960_audio_auxpcm_configs,
ARRAY_SIZE(msm8960_audio_auxpcm_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
//HTC_AUD ++
// remove this part because GPIO 47 is used for AUD FM mI2S
// msm_gpiomux_install(hap_lvl_shft_config,
// ARRAY_SIZE(hap_lvl_shft_config));
//HTC_AUD --
#ifdef MSM8930_PHASE_2
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif
}
/*
if (machine_is_msm8930_cdp() || machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid())
msm_gpiomux_install(msm8930_haptics_configs,
ARRAY_SIZE(msm8930_haptics_configs));
*/
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
return 0;
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
#if defined(CONFIG_MACH_MELIUS_CHN_CTC)
msm_gpiomux_install(sensor_config,
ARRAY_SIZE(sensor_config));
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
#ifdef CONFIG_RADIO_USE_MI2S
msm_gpiomux_install(msm8960_mi2s_configs,
ARRAY_SIZE(msm8960_mi2s_configs));
#endif
#if !defined(CONFIG_MACH_MELIUS_SKT) && !defined(CONFIG_MACH_MELIUS_KTT) && \
!defined(CONFIG_MACH_MELIUS_LGT) && !defined(CONFIG_MACH_MELIUS_CHN_CTC) && \
!defined(CONFIG_MACH_MELIUS_EUR_LTE) && !defined(CONFIG_MACH_MELIUS_EUR_OPEN) && !defined(CONFIG_MACH_CRATER_CHN_CTC)
msm_gpiomux_install(msm8960_atmel_configs,
ARRAY_SIZE(msm8960_atmel_configs));
#endif
#ifdef CONFIG_2MIC_ES305
msm_gpiomux_install(audience_suspend_configs,
ARRAY_SIZE(audience_suspend_configs));
#endif
#ifdef CONFIG_SLIMBUS_MSM_CTRL
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
msm_gpiomux_install(msm8960_audio_mbhc_configs,
ARRAY_SIZE(msm8960_audio_mbhc_configs));
#else
if (system_rev < CLK_REVISION) {
msm_gpiomux_install(msm8960_audio_i2s_rx_codec_configs_rev10,
ARRAY_SIZE(msm8960_audio_i2s_rx_codec_configs_rev10));
msm_gpiomux_install(msm8960_audio_i2s_tx_codec_configs_rev10,
ARRAY_SIZE(msm8960_audio_i2s_tx_codec_configs_rev10));
} else {
msm_gpiomux_install(msm8960_audio_i2s_rx_codec_configs,
ARRAY_SIZE(msm8960_audio_i2s_rx_codec_configs));
msm_gpiomux_install(msm8960_audio_i2s_tx_codec_configs,
ARRAY_SIZE(msm8960_audio_i2s_tx_codec_configs));
}
#endif
msm_gpiomux_install(msm8960_audio_spkr_configs,
ARRAY_SIZE(msm8960_audio_spkr_configs));
#ifdef CONFIG_AUXPCM_INTERFACE
msm_gpiomux_install(msm8960_audio_auxpcm_configs,
ARRAY_SIZE(msm8960_audio_auxpcm_configs));
#endif
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
#if !defined(CONFIG_RADIO_USE_MI2S) && !defined(CONFIG_TDMB)
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
#endif
#ifdef MSM8930_PHASE_2
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif
}
if (PLATFORM_IS_CHARM25())
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
msm_gpiomux_install(msm8960_hdmi_configs,
ARRAY_SIZE(msm8960_hdmi_configs));
#endif
#if defined(CONFIG_VIDEO_MHL_V2)
msm_gpiomux_install(msm8930_mhl_configs,
ARRAY_SIZE(msm8930_mhl_configs));
#endif
/* requested by HW team for IORA test */
#if (defined(CONFIG_MACH_MELIUS_SPR) || defined(CONFIG_MACH_MELIUS_USC))
msm_gpiomux_install(msm8930_fgchg_configs,
ARRAY_SIZE(msm8930_fgchg_configs));
#endif
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
msm_gpiomux_install(gpio_keys_config_mux,
ARRAY_SIZE(gpio_keys_config_mux));
#ifdef CONFIG_USB_SWITCH_FSA9485
msm_gpiomux_install(msm8960_fsa9485_configs,
ARRAY_SIZE(msm8960_fsa9485_configs));
#endif
#ifdef CONFIG_LEDS_AN30259A
msm_gpiomux_install(msm8930_leds_configs,
ARRAY_SIZE(msm8930_leds_configs));
#endif
#if defined(CONFIG_IR_REMOCON_FPGA)
msm_gpiomux_install(msm8930_fpga_resetn_configs,
ARRAY_SIZE(msm8930_fpga_resetn_configs));
msm_gpiomux_install(msm8930_fpga_irq_configs,
ARRAY_SIZE(msm8930_fpga_irq_configs));
#endif
msm_gpiomux_install(msm8930_sd_det_config,
ARRAY_SIZE(msm8930_sd_det_config));
#ifdef CONFIG_SAMSUNG_CMC624
if (samsung_has_cmc624()) {
msm_gpiomux_install(msm8x30_cmc624_configs,
ARRAY_SIZE(msm8x30_cmc624_configs));
}
#endif
#if defined(CONFIG_MACH_MELIUS_CHN_CTC)
msm_gpiomux_install(msm8x30_uartsel_configs,
ARRAY_SIZE(msm8x30_uartsel_configs));
#endif
#if defined(CONFIG_MACH_MELIUS_CHN_CTC) || defined(CONFIG_MACH_CRATER_CHN_CTC)
msm_gpiomux_install(msm8x30_simsel_configs,
ARRAY_SIZE(msm8x30_simsel_configs));
#endif
msm_gpiomux_install(msm8930_suspend_melius_configs,
ARRAY_SIZE(msm8930_suspend_melius_configs));
#if defined (CONFIG_MACH_MELIUS_SPR)
msm_gpiomux_install(pmic_gpio_configs,
ARRAY_SIZE(pmic_gpio_configs));
#endif
config_melius_gpio_init_sleep_gpio();
return 0;
}
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
if (rc) {
pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
return rc;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm8960_ethernet_configs,
ARRAY_SIZE(msm8960_ethernet_configs));
#endif
msm_gpiomux_install(msm8960_gsbi_configs,
ARRAY_SIZE(msm8960_gsbi_configs));
/* Emily Jiang, 20121105, Add for Focaltech FT5316 TouchScreen { */
#if defined(CONFIG_TOUCHSCREEN_FOCALTECH_FT5316) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_S3202)
msm_gpiomux_install(msm8960_focaltech_ts_configs,
ARRAY_SIZE(msm8960_focaltech_ts_configs));
#endif //CONFIG_TOUCHSCREEN_FOCALTECH_FT5316
/* } Emily Jiang, 20121105, Add for Focaltech FT5316 TouchScreen */
msm_gpiomux_install(msm8960_slimbus_config,
ARRAY_SIZE(msm8960_slimbus_config));
msm_gpiomux_install(msm8960_audio_codec_configs,
ARRAY_SIZE(msm8960_audio_codec_configs));
msm_gpiomux_install(msm8960_audio_mbhc_configs,
ARRAY_SIZE(msm8960_audio_mbhc_configs));
/* Terry Cheng 20121211, Remove Audio speaker boost setting on Boston {*/
#if 0
msm_gpiomux_install(msm8960_audio_spkr_configs,
ARRAY_SIZE(msm8960_audio_spkr_configs));
#endif
/* } Terry Cheng 20121211, Remove Audio speaker boost setting on Boston */
/* Terry Cheng, 20121207, Remove auxpcm config for Boston project {*/
#if 0
msm_gpiomux_install(msm8960_audio_auxpcm_configs,
ARRAY_SIZE(msm8960_audio_auxpcm_configs));
#endif
/* } Terry Cheng, 20121207, Remove auxpcm config for Boston project */
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
machine_is_msm8930_cdp()) {
/* Terry Cheng, 20121207, Remove hap lvl shft config for Boston project {*/
#if 0
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
#endif
/* } Terry Cheng, 20121207, Remove hap lvl shft config for Boston project {*/
/* Terry Cheng, 201211, Add compiler option for USB OTG { */
#if defined(MSM8930_PHASE_2) && defined(CONFIG_USB_OTG)
msm_gpiomux_install(msm8930_hsusb_configs,
ARRAY_SIZE(msm8930_hsusb_configs));
#endif //MSM8930_PHASE_2 && CONFIG_USB_OTG
/* } Terry Cheng, 201211, Add compiler option for USB OTG */
}
if (PLATFORM_IS_CHARM25())
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
//Terry Cheng, 20121207, Add compiler option when porting Boston
#ifdef CONFIG_HAPTIC_ISA1200
if (machine_is_msm8930_cdp() || machine_is_msm8930_mtp()
|| machine_is_msm8930_fluid())
msm_gpiomux_install(msm8930_haptics_configs,
ARRAY_SIZE(msm8930_haptics_configs));
#endif //CONFIG_HAPTIC_ISA1200
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
msm_gpiomux_install(msm8960_hdmi_configs,
ARRAY_SIZE(msm8960_hdmi_configs));
if (msm8930_mhl_display_enabled())
msm_gpiomux_install(msm8930_mhl_configs,
ARRAY_SIZE(msm8930_mhl_configs));
#endif
msm_gpiomux_install(msm8960_mdp_vsync_configs,
ARRAY_SIZE(msm8960_mdp_vsync_configs));
msm_gpiomux_install(msm8930_sd_det_config,
ARRAY_SIZE(msm8930_sd_det_config));
if (machine_is_msm8930_fluid() || machine_is_msm8930_mtp())
msm_gpiomux_install(msm8930_gyro_int_config,
ARRAY_SIZE(msm8930_gyro_int_config));
msm_gpiomux_install(msm_sitar_config, ARRAY_SIZE(msm_sitar_config));
/* Boston CR #:XXX, WH Lee, 20121128 */
#ifdef CONFIG_SENSORS_TSL2772
msm_gpiomux_install(tsl2772_int_configs,
ARRAY_SIZE(tsl2772_int_configs));
#endif
/* WH Lee, 20121128 */
//Eric Liu+
#ifdef CONFIG_BATTERY_27520
msm_gpiomux_install(msm8960_battery_27520_configs,
ARRAY_SIZE(msm8960_battery_27520_configs));
#endif
//Eric Liu-
/* Jen Chang add for pn544 nfc driver */
#ifdef CONFIG_PN544_NFC
msm_gpiomux_install(msm8960_pn544_nfc_configs,
ARRAY_SIZE(msm8960_pn544_nfc_configs));
#endif
/* Jen Chang, 20121217 */
/* Terry Cheng, 20130711, Add sapporo smart cover config { */
#ifdef CONFIG_SMART_COVER_DETECTION
msm_gpiomux_install(msm8960_smart_cover_configs,
ARRAY_SIZE(msm8960_smart_cover_configs));
#endif //CONFIG_SMART_COVER_DETECTION
/* } Terry Cheng, 20130711, Add sapporo smart cover config */
return 0;
}