void mali_pp_job_dma_cmd_prepare(struct mali_pp_core *core, struct mali_pp_job *job, u32 sub_job,
mali_bool restart_virtual, mali_dma_cmd_buf *buf)
{
u32 relative_address;
u32 start_index;
u32 nr_of_regs;
u32 *frame_registers = mali_pp_job_get_frame_registers(job);
u32 *wb0_registers = mali_pp_job_get_wb0_registers(job);
u32 *wb1_registers = mali_pp_job_get_wb1_registers(job);
u32 *wb2_registers = mali_pp_job_get_wb2_registers(job);
u32 counter_src0 = mali_pp_job_get_perf_counter_src0(job, sub_job);
u32 counter_src1 = mali_pp_job_get_perf_counter_src1(job, sub_job);
MALI_DEBUG_ASSERT_POINTER(core);
/* Write frame registers */
/*
* There are two frame registers which are different for each sub job:
* 1. The Renderer List Address Register (MALI200_REG_ADDR_FRAME)
* 2. The FS Stack Address Register (MALI200_REG_ADDR_STACK)
*/
mali_dma_write_conditional(buf, &core->hw_core, MALI200_REG_ADDR_FRAME, mali_pp_job_get_addr_frame(job, sub_job), mali_frame_registers_reset_values[MALI200_REG_ADDR_FRAME / sizeof(u32)]);
/* For virtual jobs, the stack address shouldn't be broadcast but written individually */
if (!mali_pp_job_is_virtual(job) || restart_virtual) {
mali_dma_write_conditional(buf, &core->hw_core, MALI200_REG_ADDR_STACK, mali_pp_job_get_addr_stack(job, sub_job), mali_frame_registers_reset_values[MALI200_REG_ADDR_STACK / sizeof(u32)]);
}
/* Write registers between MALI200_REG_ADDR_FRAME and MALI200_REG_ADDR_STACK */
relative_address = MALI200_REG_ADDR_RSW;
start_index = MALI200_REG_ADDR_RSW / sizeof(u32);
nr_of_regs = (MALI200_REG_ADDR_STACK - MALI200_REG_ADDR_RSW) / sizeof(u32);
mali_dma_write_array_conditional(buf, &core->hw_core,
relative_address, &frame_registers[start_index],
nr_of_regs, &mali_frame_registers_reset_values[start_index]);
/* MALI200_REG_ADDR_STACK_SIZE */
relative_address = MALI200_REG_ADDR_STACK_SIZE;
start_index = MALI200_REG_ADDR_STACK_SIZE / sizeof(u32);
mali_dma_write_conditional(buf, &core->hw_core,
relative_address, frame_registers[start_index],
mali_frame_registers_reset_values[start_index]);
/* Skip 2 reserved registers */
/* Write remaining registers */
relative_address = MALI200_REG_ADDR_ORIGIN_OFFSET_X;
start_index = MALI200_REG_ADDR_ORIGIN_OFFSET_X / sizeof(u32);
nr_of_regs = MALI_PP_MALI400_NUM_FRAME_REGISTERS - MALI200_REG_ADDR_ORIGIN_OFFSET_X / sizeof(u32);
mali_dma_write_array_conditional(buf, &core->hw_core,
relative_address, &frame_registers[start_index],
nr_of_regs, &mali_frame_registers_reset_values[start_index]);
/* Write WBx registers */
if (wb0_registers[0]) { /* M200_WB0_REG_SOURCE_SELECT register */
mali_dma_write_array_conditional(buf, &core->hw_core, MALI200_REG_ADDR_WB0, wb0_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
}
if (wb1_registers[0]) { /* M200_WB1_REG_SOURCE_SELECT register */
mali_dma_write_array_conditional(buf, &core->hw_core, MALI200_REG_ADDR_WB1, wb1_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
}
if (wb2_registers[0]) { /* M200_WB2_REG_SOURCE_SELECT register */
mali_dma_write_array_conditional(buf, &core->hw_core, MALI200_REG_ADDR_WB2, wb2_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
}
if (MALI_HW_CORE_NO_COUNTER != counter_src0) {
mali_dma_write(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_SRC, counter_src0);
mali_dma_write_conditional(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_ENABLE, MALI200_REG_VAL_PERF_CNT_ENABLE, mali_perf_cnt_enable_reset_value);
}
if (MALI_HW_CORE_NO_COUNTER != counter_src1) {
mali_dma_write(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_SRC, counter_src1);
mali_dma_write_conditional(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_ENABLE, MALI200_REG_VAL_PERF_CNT_ENABLE, mali_perf_cnt_enable_reset_value);
}
/* This is the command that starts the core. */
mali_dma_write(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_CTRL_MGMT, MALI200_REG_VAL_CTRL_MGMT_START_RENDERING);
}
void mali_pp_job_dma_cmd_prepare(struct mali_pp_core *core, struct mali_pp_job *job, u32 sub_job,
mali_dma_cmd_buf *buf)
{
u32 relative_address;
u32 start_index;
u32 nr_of_regs;
u32 *frame_registers = mali_pp_job_get_frame_registers(job);
u32 *wb0_registers = mali_pp_job_get_wb0_registers(job);
u32 *wb1_registers = mali_pp_job_get_wb1_registers(job);
u32 *wb2_registers = mali_pp_job_get_wb2_registers(job);
u32 counter_src0 = mali_pp_job_get_perf_counter_src0(job, sub_job);
u32 counter_src1 = mali_pp_job_get_perf_counter_src1(job, sub_job);
MALI_DEBUG_ASSERT_POINTER(core);
/* Write registers between MALI200_REG_ADDR_FRAME and MALI200_REG_ADDR_STACK */
relative_address = MALI200_REG_ADDR_RSW;
start_index = MALI200_REG_ADDR_RSW / sizeof(u32);
nr_of_regs = (MALI200_REG_ADDR_STACK - MALI200_REG_ADDR_RSW) / sizeof(u32);
mali_dma_write_array_conditional(buf, &core->hw_core,
relative_address, &frame_registers[start_index],
nr_of_regs, &mali_frame_registers_reset_values[start_index]);
/* MALI200_REG_ADDR_STACK_SIZE */
relative_address = MALI200_REG_ADDR_STACK_SIZE;
start_index = MALI200_REG_ADDR_STACK_SIZE / sizeof(u32);
mali_dma_write_conditional(buf, &core->hw_core,
relative_address, frame_registers[start_index],
mali_frame_registers_reset_values[start_index]);
/* Skip 2 reserved registers */
/* Write remaining registers */
relative_address = MALI200_REG_ADDR_ORIGIN_OFFSET_X;
start_index = MALI200_REG_ADDR_ORIGIN_OFFSET_X / sizeof(u32);
nr_of_regs = MALI_PP_MALI400_NUM_FRAME_REGISTERS - MALI200_REG_ADDR_ORIGIN_OFFSET_X / sizeof(u32);
mali_dma_write_array_conditional(buf, &core->hw_core,
relative_address, &frame_registers[start_index],
nr_of_regs, &mali_frame_registers_reset_values[start_index]);
/* Write WBx registers */
if (wb0_registers[0]) { /* M200_WB0_REG_SOURCE_SELECT register */
mali_dma_write_array_conditional(buf, &core->hw_core, MALI200_REG_ADDR_WB0, wb0_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
}
if (wb1_registers[0]) { /* M200_WB1_REG_SOURCE_SELECT register */
mali_dma_write_array_conditional(buf, &core->hw_core, MALI200_REG_ADDR_WB1, wb1_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
}
if (wb2_registers[0]) { /* M200_WB2_REG_SOURCE_SELECT register */
mali_dma_write_array_conditional(buf, &core->hw_core, MALI200_REG_ADDR_WB2, wb2_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
}
if (MALI_HW_CORE_NO_COUNTER != counter_src0) {
mali_dma_write(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_SRC, counter_src0);
mali_dma_write_conditional(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_ENABLE, MALI200_REG_VAL_PERF_CNT_ENABLE, mali_perf_cnt_enable_reset_value);
}
if (MALI_HW_CORE_NO_COUNTER != counter_src1) {
mali_dma_write(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_SRC, counter_src1);
mali_dma_write_conditional(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_ENABLE, MALI200_REG_VAL_PERF_CNT_ENABLE, mali_perf_cnt_enable_reset_value);
}
/* This is the command that starts the core. */
mali_dma_write(buf, &core->hw_core, MALI200_REG_ADDR_MGMT_CTRL_MGMT, MALI200_REG_VAL_CTRL_MGMT_START_RENDERING);
}