/* Base test of register maps */
static int dm_test_regmap_base(struct unit_test_state *uts)
{
struct udevice *dev;
struct regmap *map;
ofnode node;
int i;
ut_assertok(uclass_get_device(UCLASS_SYSCON, 0, &dev));
map = syscon_get_regmap(dev);
ut_assertok_ptr(map);
ut_asserteq(1, map->range_count);
ut_asserteq(0x10, map->ranges[0].start);
ut_asserteq(4, map->ranges[0].size);
ut_asserteq(0x10, map_to_sysmem(regmap_get_range(map, 0)));
ut_assertok(uclass_get_device(UCLASS_SYSCON, 1, &dev));
map = syscon_get_regmap(dev);
ut_assertok_ptr(map);
ut_asserteq(4, map->range_count);
ut_asserteq(0x20, map->ranges[0].start);
for (i = 0; i < 4; i++) {
const unsigned long addr = 0x20 + 8 * i;
ut_asserteq(addr, map->ranges[i].start);
ut_asserteq(5 + i, map->ranges[i].size);
ut_asserteq(addr, map_to_sysmem(regmap_get_range(map, i)));
}
/* Check that we can't pretend a different device is a syscon */
ut_assertok(uclass_get_device(UCLASS_I2C, 0, &dev));
map = syscon_get_regmap(dev);
ut_asserteq_ptr(ERR_PTR(-ENOEXEC), map);
/* A different device can be a syscon by using Linux-compat API */
node = ofnode_path("/syscon@2");
ut_assert(ofnode_valid(node));
map = syscon_node_to_regmap(node);
ut_assertok_ptr(map);
ut_asserteq(4, map->range_count);
ut_asserteq(0x40, map->ranges[0].start);
for (i = 0; i < 4; i++) {
const unsigned long addr = 0x40 + 8 * i;
ut_asserteq(addr, map->ranges[i].start);
ut_asserteq(5 + i, map->ranges[i].size);
ut_asserteq(addr, map_to_sysmem(regmap_get_range(map, i)));
}
return 0;
}
static int setup_reloc(void)
{
if (gd->flags & GD_FLG_SKIP_RELOC) {
debug("Skipping relocation due to flag\n");
return 0;
}
#ifdef CONFIG_SYS_TEXT_BASE
gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
#ifdef CONFIG_M68K
/*
* On all ColdFire arch cpu, monitor code starts always
* just after the default vector table location, so at 0x400
*/
gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400);
#endif
#endif
memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
debug("Relocation Offset is: %08lx\n", gd->reloc_off);
debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n",
gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd),
gd->start_addr_sp);
return 0;
}
static void add_record(int flags, const void *ptr, ulong value)
{
struct iotrace_record srec, *rec = &srec;
/*
* We don't support iotrace before relocation. Since the trace buffer
* is set up by a command, it can't be enabled at present. To change
* this we would need to set the iotrace buffer at build-time. See
* lib/trace.c for how this might be done if you are interested.
*/
if (!(gd->flags & GD_FLG_RELOC) || !iotrace.enabled)
return;
/* Store it if there is room */
if (iotrace.offset + sizeof(*rec) < iotrace.size) {
rec = (struct iotrace_record *)map_sysmem(
iotrace.start + iotrace.offset,
sizeof(value));
}
rec->flags = flags;
rec->addr = map_to_sysmem(ptr);
rec->value = value;
/* Update our checksum */
iotrace.crc32 = crc32(iotrace.crc32, (unsigned char *)rec,
sizeof(*rec));
iotrace.offset += sizeof(struct iotrace_record);
}
static efi_status_t EFIAPI efi_file_write(struct efi_file_handle *file,
efi_uintn_t *buffer_size,
void *buffer)
{
struct file_handle *fh = to_fh(file);
efi_status_t ret = EFI_SUCCESS;
loff_t actwrite;
EFI_ENTRY("%p, %p, %p", file, buffer_size, buffer);
if (set_blk_dev(fh)) {
ret = EFI_DEVICE_ERROR;
goto error;
}
if (fs_write(fh->path, map_to_sysmem(buffer), fh->offset, *buffer_size,
&actwrite)) {
ret = EFI_DEVICE_ERROR;
goto error;
}
*buffer_size = actwrite;
fh->offset += actwrite;
error:
return EFI_EXIT(ret);
}
int fdtdec_setup(void)
{
#if CONFIG_IS_ENABLED(OF_CONTROL)
# if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
void *fdt_blob;
# endif
# ifdef CONFIG_OF_EMBED
/* Get a pointer to the FDT */
# ifdef CONFIG_SPL_BUILD
gd->fdt_blob = __dtb_dt_spl_begin;
# else
gd->fdt_blob = __dtb_dt_begin;
# endif
# elif defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
/* Allow the board to override the fdt address. */
gd->fdt_blob = board_fdt_blob_setup();
# elif defined(CONFIG_OF_HOSTFILE)
if (sandbox_read_fdt_from_file()) {
puts("Failed to read control FDT\n");
return -1;
}
# endif
# ifndef CONFIG_SPL_BUILD
/* Allow the early environment to override the fdt address */
# if CONFIG_IS_ENABLED(OF_PRIOR_STAGE)
gd->fdt_blob = (void *)prior_stage_fdt_address;
# else
gd->fdt_blob = map_sysmem
(env_get_ulong("fdtcontroladdr", 16,
(unsigned long)map_to_sysmem(gd->fdt_blob)), 0);
# endif
# endif
# if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
/*
* Try and uncompress the blob.
* Unfortunately there is no way to know how big the input blob really
* is. So let us set the maximum input size arbitrarily high. 16MB
* ought to be more than enough for packed DTBs.
*/
if (uncompress_blob(gd->fdt_blob, 0x1000000, &fdt_blob) == 0)
gd->fdt_blob = fdt_blob;
/*
* Check if blob is a FIT images containings DTBs.
* If so, pick the most relevant
*/
fdt_blob = locate_dtb_in_fit(gd->fdt_blob);
if (fdt_blob) {
gd->multi_dtb_fit = gd->fdt_blob;
gd->fdt_blob = fdt_blob;
}
# endif
#endif
return fdtdec_prepare_fdt();
}
static int simple_hello(struct udevice *dev, int ch)
{
const struct dm_demo_pdata *pdata = dev_get_platdata(dev);
printf("Hello from %08x: %s %d\n", (uint)map_to_sysmem(dev), pdata->colour,
pdata->sides);
return 0;
}
static int setup_reloc(void)
{
gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
debug("Relocation Offset is: %08lx\n", gd->reloc_off);
debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n",
gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd),
gd->start_addr_sp);
return 0;
}
/* Test we can access a regmap through syscon */
static int dm_test_regmap_syscon(struct unit_test_state *uts)
{
struct regmap *map;
map = syscon_get_regmap_by_driver_data(SYSCON0);
ut_assertok_ptr(map);
ut_asserteq(1, map->range_count);
map = syscon_get_regmap_by_driver_data(SYSCON1);
ut_assertok_ptr(map);
ut_asserteq(4, map->range_count);
map = syscon_get_regmap_by_driver_data(SYSCON_COUNT);
ut_asserteq_ptr(ERR_PTR(-ENODEV), map);
ut_asserteq(0x10, map_to_sysmem(syscon_get_first_range(SYSCON0)));
ut_asserteq(0x20, map_to_sysmem(syscon_get_first_range(SYSCON1)));
ut_asserteq_ptr(ERR_PTR(-ENODEV),
syscon_get_first_range(SYSCON_COUNT));
return 0;
}
/**
* fw_get_filesystem_firmware - load firmware into an allocated buffer.
* @dev: An instance of a driver.
*
* Return: Size of total read, negative value when error.
*/
static int fw_get_filesystem_firmware(struct udevice *dev)
{
loff_t actread;
char *storage_interface, *dev_part, *ubi_mtdpart, *ubi_volume;
int ret;
storage_interface = env_get("storage_interface");
dev_part = env_get("fw_dev_part");
ubi_mtdpart = env_get("fw_ubi_mtdpart");
ubi_volume = env_get("fw_ubi_volume");
if (storage_interface && dev_part) {
ret = fs_set_blk_dev(storage_interface, dev_part, FS_TYPE_ANY);
} else if (storage_interface && ubi_mtdpart && ubi_volume) {
ret = mount_ubifs(ubi_mtdpart, ubi_volume);
if (ret)
return ret;
if (!strcmp("ubi", storage_interface))
ret = fs_set_blk_dev(storage_interface, NULL,
FS_TYPE_UBIFS);
else
ret = -ENODEV;
} else {
ret = select_fs_dev(dev->platdata);
}
if (ret)
goto out;
struct firmware *firmwarep = dev_get_priv(dev);
if (!firmwarep)
return -ENOMEM;
ret = fs_read(firmwarep->name, (ulong)map_to_sysmem(firmwarep->data),
firmwarep->offset, firmwarep->size, &actread);
if (ret) {
debug("Error: %d Failed to read %s from flash %lld != %zu.\n",
ret, firmwarep->name, actread, firmwarep->size);
} else {
ret = actread;
}
out:
#ifdef CONFIG_CMD_UBIFS
umount_ubifs();
#endif
return ret;
}
static efi_status_t file_read(struct file_handle *fh, u64 *buffer_size,
void *buffer)
{
loff_t actread;
if (fs_read(fh->path, map_to_sysmem(buffer), fh->offset,
*buffer_size, &actread))
return EFI_DEVICE_ERROR;
*buffer_size = actread;
fh->offset += actread;
return EFI_SUCCESS;
}
/* Base test of register maps */
static int dm_test_regmap_base(struct unit_test_state *uts)
{
struct udevice *dev;
struct regmap *map;
int i;
ut_assertok(uclass_get_device(UCLASS_SYSCON, 0, &dev));
map = syscon_get_regmap(dev);
ut_assertok_ptr(map);
ut_asserteq(1, map->range_count);
ut_asserteq(0x10, map->base);
ut_asserteq(0x10, map->range->start);
ut_asserteq(4, map->range->size);
ut_asserteq_ptr(&map->base_range, map->range);
ut_asserteq(0x10, map_to_sysmem(regmap_get_range(map, 0)));
ut_assertok(uclass_get_device(UCLASS_SYSCON, 1, &dev));
map = syscon_get_regmap(dev);
ut_assertok_ptr(map);
ut_asserteq(4, map->range_count);
ut_asserteq(0x20, map->base);
ut_assert(&map->base_range != map->range);
for (i = 0; i < 4; i++) {
const unsigned long addr = 0x20 + 8 * i;
ut_asserteq(addr, map->range[i].start);
ut_asserteq(5 + i, map->range[i].size);
ut_asserteq(addr, map_to_sysmem(regmap_get_range(map, i)));
}
/* Check that we can't pretend a different device is a syscon */
ut_assertok(uclass_get_device(UCLASS_I2C, 0, &dev));
map = syscon_get_regmap(dev);
ut_asserteq_ptr(ERR_PTR(-ENOEXEC), map);
return 0;
}
/*
* Subroutine: bmp_display
*
* Description: Display bmp file located in memory
*
* Inputs: addr address of the bmp file
*
* Return: None
*
*/
int bmp_display(ulong addr, int x, int y)
{
#ifdef CONFIG_DM_VIDEO
struct udevice *dev;
#endif
int ret;
struct bmp_image *bmp = map_sysmem(addr, 0);
void *bmp_alloc_addr = NULL;
unsigned long len;
if (!((bmp->header.signature[0]=='B') &&
(bmp->header.signature[1]=='M')))
bmp = gunzip_bmp(addr, &len, &bmp_alloc_addr);
if (!bmp) {
printf("There is no valid bmp file at the given address\n");
return 1;
}
addr = map_to_sysmem(bmp);
#ifdef CONFIG_DM_VIDEO
ret = uclass_first_device(UCLASS_VIDEO, &dev);
if (!ret) {
if (!dev)
ret = -ENODEV;
if (!ret) {
bool align = false;
# ifdef CONFIG_SPLASH_SCREEN_ALIGN
align = true;
# endif /* CONFIG_SPLASH_SCREEN_ALIGN */
ret = video_bmp_display(dev, addr, x, y, align);
}
}
#elif defined(CONFIG_LCD)
ret = lcd_display_bitmap(addr, x, y);
#elif defined(CONFIG_VIDEO)
ret = video_display_bitmap(addr, x, y);
#else
# error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
#endif
if (bmp_alloc_addr)
free(bmp_alloc_addr);
return ret ? CMD_RET_FAILURE : 0;
}
/**
* bootm_find_images - wrapper to find and locate various images
* @flag: Ignored Argument
* @argc: command argument count
* @argv: command argument list
*
* boot_find_images() will attempt to load an available ramdisk,
* flattened device tree, as well as specifically marked
* "loadable" images (loadables are FIT only)
*
* Note: bootm_find_images will skip an image if it is not found
*
* @return:
* 0, if all existing images were loaded correctly
* 1, if an image is found but corrupted, or invalid
*/
int bootm_find_images(int flag, int argc, char * const argv[])
{
int ret;
/* find ramdisk */
ret = boot_get_ramdisk(argc, argv, &images, IH_INITRD_ARCH,
&images.rd_start, &images.rd_end);
if (ret) {
puts("Ramdisk image is corrupt or invalid\n");
return 1;
}
#if IMAGE_ENABLE_OF_LIBFDT
/* find flattened device tree */
ret = boot_get_fdt(flag, argc, argv, IH_ARCH_DEFAULT, &images,
&images.ft_addr, &images.ft_len);
if (ret) {
puts("Could not find a valid device tree\n");
return 1;
}
if (CONFIG_IS_ENABLED(CMD_FDT))
set_working_fdt_addr(map_to_sysmem(images.ft_addr));
#endif
#if IMAGE_ENABLE_FIT
#if defined(CONFIG_FPGA)
/* find bitstreams */
ret = boot_get_fpga(argc, argv, &images, IH_ARCH_DEFAULT,
NULL, NULL);
if (ret) {
printf("FPGA image is corrupted or invalid\n");
return 1;
}
#endif
/* find all of the loadables */
ret = boot_get_loadable(argc, argv, &images, IH_ARCH_DEFAULT,
NULL, NULL);
if (ret) {
printf("Loadable(s) is corrupt or invalid\n");
return 1;
}
#endif
return 0;
}
int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
ulong *setup_start, ulong *setup_len)
{
int noffset;
ulong addr;
ulong len;
int ret;
addr = map_to_sysmem(images->fit_hdr_os);
noffset = fit_get_node_from_config(images, FIT_SETUP_PROP, addr);
if (noffset < 0)
return noffset;
ret = fit_image_load(images, addr, NULL, NULL, arch,
IH_TYPE_X86_SETUP, BOOTSTAGE_ID_FIT_SETUP_START,
FIT_LOAD_REQUIRED, setup_start, &len);
return ret;
}
/*
* Install the SMBIOS table as a configuration table.
*
* @return status code
*/
efi_status_t efi_smbios_register(void)
{
/* Map within the low 32 bits, to allow for 32bit SMBIOS tables */
u64 dmi_addr = U32_MAX;
efi_status_t ret;
void *dmi;
/* Reserve 4kiB page for SMBIOS */
ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS,
EFI_RUNTIME_SERVICES_DATA, 1, &dmi_addr);
if (ret != EFI_SUCCESS) {
/* Could not find space in lowmem, use highmem instead */
ret = efi_allocate_pages(EFI_ALLOCATE_ANY_PAGES,
EFI_RUNTIME_SERVICES_DATA, 1,
&dmi_addr);
if (ret != EFI_SUCCESS)
return ret;
}
/*
* Generate SMBIOS tables - we know that efi_allocate_pages() returns
* a 4k-aligned address, so it is safe to assume that
* write_smbios_table() will write the table at that address.
*
* Note that on sandbox, efi_allocate_pages() unfortunately returns a
* pointer even though it uses a uint64_t type. Convert it.
*/
assert(!(dmi_addr & 0xf));
dmi = (void *)(uintptr_t)dmi_addr;
write_smbios_table(map_to_sysmem(dmi));
/* And expose them to our EFI payload */
return efi_install_configuration_table(&smbios_guid, dmi);
}
/**
* fit_image_print - prints out the FIT component image details
* @fit: pointer to the FIT format image header
* @image_noffset: offset of the component image node
* @p: pointer to prefix string
*
* fit_image_print() lists all mandatory properies for the processed component
* image. If present, hash nodes are printed out as well. Load
* address for images of type firmware is also printed out. Since the load
* address is not mandatory for firmware images, it will be output as
* "unavailable" when not present.
*
* returns:
* no returned results
*/
void fit_image_print(const void *fit, int image_noffset, const char *p)
{
char *desc;
uint8_t type, arch, os, comp;
size_t size;
ulong load, entry;
const void *data;
int noffset;
int ndepth;
int ret;
/* Mandatory properties */
ret = fit_get_desc(fit, image_noffset, &desc);
printf("%s Description: ", p);
if (ret)
printf("unavailable\n");
else
printf("%s\n", desc);
fit_image_get_type(fit, image_noffset, &type);
printf("%s Type: %s\n", p, genimg_get_type_name(type));
fit_image_get_comp(fit, image_noffset, &comp);
printf("%s Compression: %s\n", p, genimg_get_comp_name(comp));
ret = fit_image_get_data(fit, image_noffset, &data, &size);
#ifndef USE_HOSTCC
printf("%s Data Start: ", p);
if (ret) {
printf("unavailable\n");
} else {
void *vdata = (void *)data;
printf("0x%08lx\n", (ulong)map_to_sysmem(vdata));
}
#endif
printf("%s Data Size: ", p);
if (ret)
printf("unavailable\n");
else
genimg_print_size(size);
/* Remaining, type dependent properties */
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) ||
(type == IH_TYPE_FLATDT)) {
fit_image_get_arch(fit, image_noffset, &arch);
printf("%s Architecture: %s\n", p, genimg_get_arch_name(arch));
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) {
fit_image_get_os(fit, image_noffset, &os);
printf("%s OS: %s\n", p, genimg_get_os_name(os));
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
ret = fit_image_get_load(fit, image_noffset, &load);
printf("%s Load Address: ", p);
if (ret)
printf("unavailable\n");
else
printf("0x%08lx\n", load);
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_RAMDISK)) {
fit_image_get_entry(fit, image_noffset, &entry);
printf("%s Entry Point: ", p);
if (ret)
printf("unavailable\n");
else
printf("0x%08lx\n", entry);
}
/* Process all hash subnodes of the component image node */
for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth);
(noffset >= 0) && (ndepth > 0);
noffset = fdt_next_node(fit, noffset, &ndepth)) {
if (ndepth == 1) {
/* Direct child node of the component image node */
fit_image_print_verification_data(fit, noffset, p);
}
}
}
int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
const char **fit_unamep, const char **fit_uname_configp,
int arch, int image_type, int bootstage_id,
enum fit_load_op load_op, ulong *datap, ulong *lenp)
{
int cfg_noffset, noffset;
const char *fit_uname;
const char *fit_uname_config;
const void *fit;
const void *buf;
size_t size;
int type_ok, os_ok;
ulong load, data, len;
int ret;
fit = map_sysmem(addr, 0);
fit_uname = fit_unamep ? *fit_unamep : NULL;
fit_uname_config = fit_uname_configp ? *fit_uname_configp : NULL;
printf("## Loading %s from FIT Image at %08lx ...\n", prop_name, addr);
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT);
if (!fit_check_format(fit)) {
printf("Bad FIT %s image format!\n", prop_name);
bootstage_error(bootstage_id + BOOTSTAGE_SUB_FORMAT);
return -ENOEXEC;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT_OK);
if (fit_uname) {
/* get ramdisk component image node offset */
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_UNIT_NAME);
noffset = fit_image_get_node(fit, fit_uname);
} else {
/*
* no image node unit name, try to get config
* node first. If config unit node name is NULL
* fit_conf_get_node() will try to find default config node
*/
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_NO_UNIT_NAME);
if (IMAGE_ENABLE_BEST_MATCH && !fit_uname_config) {
cfg_noffset = fit_conf_find_compat(fit, gd_fdt_blob());
} else {
cfg_noffset = fit_conf_get_node(fit,
fit_uname_config);
}
if (cfg_noffset < 0) {
puts("Could not find configuration node\n");
bootstage_error(bootstage_id +
BOOTSTAGE_SUB_NO_UNIT_NAME);
return -ENOENT;
}
fit_uname_config = fdt_get_name(fit, cfg_noffset, NULL);
printf(" Using '%s' configuration\n", fit_uname_config);
if (image_type == IH_TYPE_KERNEL) {
/* Remember (and possibly verify) this config */
images->fit_uname_cfg = fit_uname_config;
if (IMAGE_ENABLE_VERIFY && images->verify) {
puts(" Verifying Hash Integrity ... ");
if (!fit_config_verify(fit, cfg_noffset)) {
puts("Bad Data Hash\n");
bootstage_error(bootstage_id +
BOOTSTAGE_SUB_HASH);
return -EACCES;
}
puts("OK\n");
}
bootstage_mark(BOOTSTAGE_ID_FIT_CONFIG);
}
noffset = fit_conf_get_prop_node(fit, cfg_noffset,
prop_name);
fit_uname = fit_get_name(fit, noffset, NULL);
}
if (noffset < 0) {
puts("Could not find subimage node\n");
bootstage_error(bootstage_id + BOOTSTAGE_SUB_SUBNODE);
return -ENOENT;
}
printf(" Trying '%s' %s subimage\n", fit_uname, prop_name);
ret = fit_image_select(fit, noffset, images->verify);
if (ret) {
bootstage_error(bootstage_id + BOOTSTAGE_SUB_HASH);
return ret;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
if (!fit_image_check_target_arch(fit, noffset)) {
puts("Unsupported Architecture\n");
bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
return -ENOEXEC;
}
if (image_type == IH_TYPE_FLATDT &&
!fit_image_check_comp(fit, noffset, IH_COMP_NONE)) {
puts("FDT image is compressed");
return -EPROTONOSUPPORT;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
type_ok = fit_image_check_type(fit, noffset, image_type) ||
(image_type == IH_TYPE_KERNEL &&
fit_image_check_type(fit, noffset,
IH_TYPE_KERNEL_NOLOAD));
os_ok = image_type == IH_TYPE_FLATDT ||
fit_image_check_os(fit, noffset, IH_OS_LINUX);
if (!type_ok || !os_ok) {
printf("No Linux %s %s Image\n", genimg_get_arch_name(arch),
genimg_get_type_name(image_type));
bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
return -EIO;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL_OK);
/* get image data address and length */
if (fit_image_get_data(fit, noffset, &buf, &size)) {
printf("Could not find %s subimage data!\n", prop_name);
bootstage_error(bootstage_id + BOOTSTAGE_SUB_GET_DATA);
return -ENOENT;
}
len = (ulong)size;
/* verify that image data is a proper FDT blob */
if (image_type == IH_TYPE_FLATDT && fdt_check_header((char *)buf)) {
puts("Subimage data is not a FDT");
return -ENOEXEC;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_GET_DATA_OK);
/*
* Work-around for eldk-4.2 which gives this warning if we try to
* case in the unmap_sysmem() call:
* warning: initialization discards qualifiers from pointer target type
*/
{
void *vbuf = (void *)buf;
data = map_to_sysmem(vbuf);
}
if (load_op == FIT_LOAD_IGNORED) {
/* Don't load */
} else if (fit_image_get_load(fit, noffset, &load)) {
if (load_op == FIT_LOAD_REQUIRED) {
printf("Can't get %s subimage load address!\n",
prop_name);
bootstage_error(bootstage_id + BOOTSTAGE_SUB_LOAD);
return -EBADF;
}
} else {
ulong image_start, image_end;
ulong load_end;
void *dst;
/*
* move image data to the load address,
* make sure we don't overwrite initial image
*/
image_start = addr;
image_end = addr + fit_get_size(fit);
load_end = load + len;
if (image_type != IH_TYPE_KERNEL &&
load < image_end && load_end > image_start) {
printf("Error: %s overwritten\n", prop_name);
return -EXDEV;
}
printf(" Loading %s from 0x%08lx to 0x%08lx\n",
prop_name, data, load);
dst = map_sysmem(load, len);
memmove(dst, buf, len);
data = load;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_LOAD);
*datap = data;
*lenp = len;
if (fit_unamep)
*fit_unamep = (char *)fit_uname;
if (fit_uname_configp)
*fit_uname_configp = (char *)fit_uname_config;
return noffset;
}
/*
* Flattened Device Tree command, see the help for parameter definitions.
*/
static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
/*
* Set the address of the fdt
*/
if (strncmp(argv[1], "ad", 2) == 0) {
unsigned long addr;
int control = 0;
struct fdt_header *blob;
/*
* Set the address [and length] of the fdt.
*/
argc -= 2;
argv += 2;
/* Temporary #ifdef - some archs don't have fdt_blob yet */
#ifdef CONFIG_OF_CONTROL
if (argc && !strcmp(*argv, "-c")) {
control = 1;
argc--;
argv++;
}
#endif
if (argc == 0) {
if (control)
blob = (struct fdt_header *)gd->fdt_blob;
else
blob = working_fdt;
if (!blob || !fdt_valid(&blob))
return 1;
printf("The address of the fdt is %#08lx\n",
control ? (ulong)map_to_sysmem(blob) :
getenv_hex("fdtaddr", 0));
return 0;
}
addr = simple_strtoul(argv[0], NULL, 16);
blob = map_sysmem(addr, 0);
if (!fdt_valid(&blob))
return 1;
if (control)
gd->fdt_blob = blob;
else
set_working_fdt_addr(addr);
if (argc >= 2) {
int len;
int err;
/*
* Optional new length
*/
len = simple_strtoul(argv[1], NULL, 16);
if (len < fdt_totalsize(blob)) {
printf ("New length %d < existing length %d, "
"ignoring.\n",
len, fdt_totalsize(blob));
} else {
/*
* Open in place with a new length.
*/
err = fdt_open_into(blob, blob, len);
if (err != 0) {
printf ("libfdt fdt_open_into(): %s\n",
fdt_strerror(err));
}
}
}
return CMD_RET_SUCCESS;
}
if (!working_fdt) {
puts(
"No FDT memory address configured. Please configure\n"
"the FDT address via \"fdt addr <address>\" command.\n"
"Aborting!\n");
return CMD_RET_FAILURE;
}
/*
* Move the working_fdt
*/
if (strncmp(argv[1], "mo", 2) == 0) {
struct fdt_header *newaddr;
int len;
int err;
if (argc < 4)
return CMD_RET_USAGE;
/*
* Set the address and length of the fdt.
*/
working_fdt = (struct fdt_header *)simple_strtoul(argv[2], NULL, 16);
if (!fdt_valid(&working_fdt))
return 1;
newaddr = (struct fdt_header *)simple_strtoul(argv[3],NULL,16);
/*
* If the user specifies a length, use that. Otherwise use the
* current length.
*/
if (argc <= 4) {
len = fdt_totalsize(working_fdt);
} else {
len = simple_strtoul(argv[4], NULL, 16);
if (len < fdt_totalsize(working_fdt)) {
printf ("New length 0x%X < existing length "
"0x%X, aborting.\n",
len, fdt_totalsize(working_fdt));
return 1;
}
}
/*
* Copy to the new location.
*/
err = fdt_open_into(working_fdt, newaddr, len);
if (err != 0) {
printf ("libfdt fdt_open_into(): %s\n",
fdt_strerror(err));
return 1;
}
working_fdt = newaddr;
/*
* Make a new node
*/
} else if (strncmp(argv[1], "mk", 2) == 0) {
char *pathp; /* path */
char *nodep; /* new node to add */
int nodeoffset; /* node offset from libfdt */
int err;
/*
* Parameters: Node path, new node to be appended to the path.
*/
if (argc < 4)
return CMD_RET_USAGE;
pathp = argv[2];
nodep = argv[3];
nodeoffset = fdt_path_offset (working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
err = fdt_add_subnode(working_fdt, nodeoffset, nodep);
if (err < 0) {
printf ("libfdt fdt_add_subnode(): %s\n",
fdt_strerror(err));
return 1;
}
/*
* Set the value of a property in the working_fdt.
*/
} else if (argv[1][0] == 's') {
char *pathp; /* path */
char *prop; /* property */
int nodeoffset; /* node offset from libfdt */
static char data[SCRATCHPAD]; /* storage for the property */
int len; /* new length of the property */
int ret; /* return value */
/*
* Parameters: Node path, property, optional value.
*/
if (argc < 4)
return CMD_RET_USAGE;
pathp = argv[2];
prop = argv[3];
if (argc == 4) {
len = 0;
} else {
ret = fdt_parse_prop(&argv[4], argc - 4, data, &len);
if (ret != 0)
return ret;
}
nodeoffset = fdt_path_offset (working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
ret = fdt_setprop(working_fdt, nodeoffset, prop, data, len);
if (ret < 0) {
printf ("libfdt fdt_setprop(): %s\n", fdt_strerror(ret));
return 1;
}
/********************************************************************
* Get the value of a property in the working_fdt.
********************************************************************/
} else if (argv[1][0] == 'g') {
char *subcmd; /* sub-command */
char *pathp; /* path */
char *prop; /* property */
char *var; /* variable to store result */
int nodeoffset; /* node offset from libfdt */
const void *nodep; /* property node pointer */
int len = 0; /* new length of the property */
/*
* Parameters: Node path, property, optional value.
*/
if (argc < 5)
return CMD_RET_USAGE;
subcmd = argv[2];
if (argc < 6 && subcmd[0] != 's')
return CMD_RET_USAGE;
var = argv[3];
pathp = argv[4];
prop = argv[5];
nodeoffset = fdt_path_offset(working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
if (subcmd[0] == 'n' || (subcmd[0] == 's' && argc == 5)) {
int reqIndex = -1;
int startDepth = fdt_node_depth(
working_fdt, nodeoffset);
int curDepth = startDepth;
int curIndex = -1;
int nextNodeOffset = fdt_next_node(
working_fdt, nodeoffset, &curDepth);
if (subcmd[0] == 'n')
reqIndex = simple_strtoul(argv[5], NULL, 16);
while (curDepth > startDepth) {
if (curDepth == startDepth + 1)
curIndex++;
if (subcmd[0] == 'n' && curIndex == reqIndex) {
const char *nodeName = fdt_get_name(
working_fdt, nextNodeOffset, NULL);
setenv(var, (char *)nodeName);
return 0;
}
nextNodeOffset = fdt_next_node(
working_fdt, nextNodeOffset, &curDepth);
if (nextNodeOffset < 0)
break;
}
if (subcmd[0] == 's') {
/* get the num nodes at this level */
setenv_ulong(var, curIndex + 1);
} else {
/* node index not found */
printf("libfdt node not found\n");
return 1;
}
} else {
nodep = fdt_getprop(
working_fdt, nodeoffset, prop, &len);
if (len == 0) {
/* no property value */
setenv(var, "");
return 0;
} else if (len > 0) {
if (subcmd[0] == 'v') {
int ret;
ret = fdt_value_setenv(nodep, len, var);
if (ret != 0)
return ret;
} else if (subcmd[0] == 'a') {
/* Get address */
char buf[11];
sprintf(buf, "0x%p", nodep);
setenv(var, buf);
} else if (subcmd[0] == 's') {
/* Get size */
char buf[11];
sprintf(buf, "0x%08X", len);
setenv(var, buf);
} else
return CMD_RET_USAGE;
return 0;
} else {
printf("libfdt fdt_getprop(): %s\n",
fdt_strerror(len));
return 1;
}
}
/*
* Print (recursive) / List (single level)
*/
} else if ((argv[1][0] == 'p') || (argv[1][0] == 'l')) {
int depth = MAX_LEVEL; /* how deep to print */
char *pathp; /* path */
char *prop; /* property */
int ret; /* return value */
static char root[2] = "/";
/*
* list is an alias for print, but limited to 1 level
*/
if (argv[1][0] == 'l') {
depth = 1;
}
/*
* Get the starting path. The root node is an oddball,
* the offset is zero and has no name.
*/
if (argc == 2)
pathp = root;
else
pathp = argv[2];
if (argc > 3)
prop = argv[3];
else
prop = NULL;
ret = fdt_print(pathp, prop, depth);
if (ret != 0)
return ret;
/*
* Remove a property/node
*/
} else if (strncmp(argv[1], "rm", 2) == 0) {
int nodeoffset; /* node offset from libfdt */
int err;
/*
* Get the path. The root node is an oddball, the offset
* is zero and has no name.
*/
nodeoffset = fdt_path_offset (working_fdt, argv[2]);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
/*
* Do the delete. A fourth parameter means delete a property,
* otherwise delete the node.
*/
if (argc > 3) {
err = fdt_delprop(working_fdt, nodeoffset, argv[3]);
if (err < 0) {
printf("libfdt fdt_delprop(): %s\n",
fdt_strerror(err));
return err;
}
} else {
err = fdt_del_node(working_fdt, nodeoffset);
if (err < 0) {
printf("libfdt fdt_del_node(): %s\n",
fdt_strerror(err));
return err;
}
}
/*
* Display header info
*/
} else if (argv[1][0] == 'h') {
u32 version = fdt_version(working_fdt);
printf("magic:\t\t\t0x%x\n", fdt_magic(working_fdt));
printf("totalsize:\t\t0x%x (%d)\n", fdt_totalsize(working_fdt),
fdt_totalsize(working_fdt));
printf("off_dt_struct:\t\t0x%x\n",
fdt_off_dt_struct(working_fdt));
printf("off_dt_strings:\t\t0x%x\n",
fdt_off_dt_strings(working_fdt));
printf("off_mem_rsvmap:\t\t0x%x\n",
fdt_off_mem_rsvmap(working_fdt));
printf("version:\t\t%d\n", version);
printf("last_comp_version:\t%d\n",
fdt_last_comp_version(working_fdt));
if (version >= 2)
printf("boot_cpuid_phys:\t0x%x\n",
fdt_boot_cpuid_phys(working_fdt));
if (version >= 3)
printf("size_dt_strings:\t0x%x\n",
fdt_size_dt_strings(working_fdt));
if (version >= 17)
printf("size_dt_struct:\t\t0x%x\n",
fdt_size_dt_struct(working_fdt));
printf("number mem_rsv:\t\t0x%x\n",
fdt_num_mem_rsv(working_fdt));
printf("\n");
/*
* Set boot cpu id
*/
} else if (strncmp(argv[1], "boo", 3) == 0) {
unsigned long tmp = simple_strtoul(argv[2], NULL, 16);
fdt_set_boot_cpuid_phys(working_fdt, tmp);
/*
* memory command
*/
} else if (strncmp(argv[1], "me", 2) == 0) {
uint64_t addr, size;
int err;
addr = simple_strtoull(argv[2], NULL, 16);
size = simple_strtoull(argv[3], NULL, 16);
err = fdt_fixup_memory(working_fdt, addr, size);
if (err < 0)
return err;
/*
* mem reserve commands
*/
} else if (strncmp(argv[1], "rs", 2) == 0) {
if (argv[2][0] == 'p') {
uint64_t addr, size;
int total = fdt_num_mem_rsv(working_fdt);
int j, err;
printf("index\t\t start\t\t size\n");
printf("-------------------------------"
"-----------------\n");
for (j = 0; j < total; j++) {
err = fdt_get_mem_rsv(working_fdt, j, &addr, &size);
if (err < 0) {
printf("libfdt fdt_get_mem_rsv(): %s\n",
fdt_strerror(err));
return err;
}
printf(" %x\t%08x%08x\t%08x%08x\n", j,
(u32)(addr >> 32),
(u32)(addr & 0xffffffff),
(u32)(size >> 32),
(u32)(size & 0xffffffff));
}
} else if (argv[2][0] == 'a') {
ulong fit_get_end(const void *fit)
{
return map_to_sysmem((void *)(fit + fdt_totalsize(fit)));
}
/**
* boot_get_fdt - main fdt handling routine
* @argc: command argument count
* @argv: command argument list
* @arch: architecture (IH_ARCH_...)
* @images: pointer to the bootm images structure
* @of_flat_tree: pointer to a char* variable, will hold fdt start address
* @of_size: pointer to a ulong variable, will hold fdt length
*
* boot_get_fdt() is responsible for finding a valid flat device tree image.
* Curently supported are the following ramdisk sources:
* - multicomponent kernel/ramdisk image,
* - commandline provided address of decicated ramdisk image.
*
* returns:
* 0, if fdt image was found and valid, or skipped
* of_flat_tree and of_size are set to fdt start address and length if
* fdt image is found and valid
*
* 1, if fdt image is found but corrupted
* of_flat_tree and of_size are set to 0 if no fdt exists
*/
int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
{
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
const image_header_t *fdt_hdr;
ulong load, load_end;
ulong image_start, image_data, image_end;
#endif
ulong fdt_addr;
char *fdt_blob = NULL;
void *buf;
#if CONFIG_IS_ENABLED(FIT)
const char *fit_uname_config = images->fit_uname_cfg;
const char *fit_uname_fdt = NULL;
ulong default_addr;
int fdt_noffset;
#endif
const char *select = NULL;
int ok_no_fdt = 0;
*of_flat_tree = NULL;
*of_size = 0;
if (argc > 2)
select = argv[2];
if (select || genimg_has_config(images)) {
#if CONFIG_IS_ENABLED(FIT)
if (select) {
/*
* If the FDT blob comes from the FIT image and the
* FIT image address is omitted in the command line
* argument, try to use ramdisk or os FIT image
* address or default load address.
*/
if (images->fit_uname_rd)
default_addr = (ulong)images->fit_hdr_rd;
else if (images->fit_uname_os)
default_addr = (ulong)images->fit_hdr_os;
else
default_addr = load_addr;
if (fit_parse_conf(select, default_addr,
&fdt_addr, &fit_uname_config)) {
debug("* fdt: config '%s' from image at 0x%08lx\n",
fit_uname_config, fdt_addr);
} else if (fit_parse_subimage(select, default_addr,
&fdt_addr, &fit_uname_fdt)) {
debug("* fdt: subimage '%s' from image at 0x%08lx\n",
fit_uname_fdt, fdt_addr);
} else
#endif
{
fdt_addr = simple_strtoul(select, NULL, 16);
debug("* fdt: cmdline image address = 0x%08lx\n",
fdt_addr);
}
#if CONFIG_IS_ENABLED(FIT)
} else {
/* use FIT configuration provided in first bootm
* command argument
*/
fdt_addr = map_to_sysmem(images->fit_hdr_os);
fdt_noffset = fit_get_node_from_config(images,
FIT_FDT_PROP,
fdt_addr);
if (fdt_noffset == -ENOLINK)
return 0;
else if (fdt_noffset < 0)
return 1;
}
#endif
debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
fdt_addr);
/* copy from dataflash if needed */
fdt_addr = genimg_get_image(fdt_addr);
/*
* Check if there is an FDT image at the
* address provided in the second bootm argument
* check image type, for FIT images get a FIT node.
*/
buf = map_sysmem(fdt_addr, 0);
switch (genimg_get_format(buf)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
/* verify fdt_addr points to a valid image header */
printf("## Flattened Device Tree from Legacy Image at %08lx\n",
fdt_addr);
fdt_hdr = image_get_fdt(fdt_addr);
if (!fdt_hdr)
goto no_fdt;
/*
* move image data to the load address,
* make sure we don't overwrite initial image
*/
image_start = (ulong)fdt_hdr;
image_data = (ulong)image_get_data(fdt_hdr);
image_end = image_get_image_end(fdt_hdr);
load = image_get_load(fdt_hdr);
load_end = load + image_get_data_size(fdt_hdr);
if (load == image_start ||
load == image_data) {
fdt_addr = load;
break;
}
if ((load < image_end) && (load_end > image_start)) {
fdt_error("fdt overwritten");
goto error;
}
debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
image_data, load);
memmove((void *)load,
(void *)image_data,
image_get_data_size(fdt_hdr));
fdt_addr = load;
break;
#endif
case IMAGE_FORMAT_FIT:
/*
* This case will catch both: new uImage format
* (libfdt based) and raw FDT blob (also libfdt
* based).
*/
#if CONFIG_IS_ENABLED(FIT)
/* check FDT blob vs FIT blob */
if (fit_check_format(buf)) {
ulong load, len;
fdt_noffset = fit_image_load(images,
fdt_addr, &fit_uname_fdt,
&fit_uname_config,
arch, IH_TYPE_FLATDT,
BOOTSTAGE_ID_FIT_FDT_START,
FIT_LOAD_OPTIONAL, &load, &len);
images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
images->fit_uname_fdt = fit_uname_fdt;
images->fit_noffset_fdt = fdt_noffset;
fdt_addr = load;
break;
} else
#endif
{
/*
* FDT blob
*/
debug("* fdt: raw FDT blob\n");
printf("## Flattened Device Tree blob at %08lx\n",
(long)fdt_addr);
}
break;
default:
puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
goto no_fdt;
}
printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
fdt_blob = map_sysmem(fdt_addr, 0);
} else if (images->legacy_hdr_valid &&
image_check_type(&images->legacy_hdr_os_copy,
IH_TYPE_MULTI)) {
ulong fdt_data, fdt_len;
/*
* Now check if we have a legacy multi-component image,
* get second entry data start address and len.
*/
printf("## Flattened Device Tree from multi component Image at %08lX\n",
(ulong)images->legacy_hdr_os);
image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
&fdt_len);
if (fdt_len) {
fdt_blob = (char *)fdt_data;
printf(" Booting using the fdt at 0x%p\n", fdt_blob);
if (fdt_check_header(fdt_blob) != 0) {
fdt_error("image is not a fdt");
goto error;
}
if (fdt_totalsize(fdt_blob) != fdt_len) {
fdt_error("fdt size != image size");
goto error;
}
} else {
debug("## No Flattened Device Tree\n");
goto no_fdt;
}
} else {
debug("## No Flattened Device Tree\n");
goto no_fdt;
}
*of_flat_tree = fdt_blob;
*of_size = fdt_totalsize(fdt_blob);
debug(" of_flat_tree at 0x%08lx size 0x%08lx\n",
(ulong)*of_flat_tree, *of_size);
return 0;
no_fdt:
ok_no_fdt = 1;
error:
*of_flat_tree = NULL;
*of_size = 0;
if (!select && ok_no_fdt) {
debug("Continuing to boot without FDT\n");
return 0;
}
return 1;
}
static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
const void *os_hdr;
bool ep_found = false;
int ret;
/* get kernel image header, start address and length */
os_hdr = boot_get_kernel(cmdtp, flag, argc, argv,
&images, &images.os.image_start, &images.os.image_len);
if (images.os.image_len == 0) {
puts("ERROR: can't get kernel image!\n");
return 1;
}
/* get image parameters */
switch (genimg_get_format(os_hdr)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
images.os.type = image_get_type(os_hdr);
images.os.comp = image_get_comp(os_hdr);
images.os.os = image_get_os(os_hdr);
images.os.end = image_get_image_end(os_hdr);
images.os.load = image_get_load(os_hdr);
images.os.arch = image_get_arch(os_hdr);
break;
#endif
#if IMAGE_ENABLE_FIT
case IMAGE_FORMAT_FIT:
if (fit_image_get_type(images.fit_hdr_os,
images.fit_noffset_os,
&images.os.type)) {
puts("Can't get image type!\n");
bootstage_error(BOOTSTAGE_ID_FIT_TYPE);
return 1;
}
if (fit_image_get_comp(images.fit_hdr_os,
images.fit_noffset_os,
&images.os.comp)) {
puts("Can't get image compression!\n");
bootstage_error(BOOTSTAGE_ID_FIT_COMPRESSION);
return 1;
}
if (fit_image_get_os(images.fit_hdr_os, images.fit_noffset_os,
&images.os.os)) {
puts("Can't get image OS!\n");
bootstage_error(BOOTSTAGE_ID_FIT_OS);
return 1;
}
if (fit_image_get_arch(images.fit_hdr_os,
images.fit_noffset_os,
&images.os.arch)) {
puts("Can't get image ARCH!\n");
return 1;
}
images.os.end = fit_get_end(images.fit_hdr_os);
if (fit_image_get_load(images.fit_hdr_os, images.fit_noffset_os,
&images.os.load)) {
puts("Can't get image load address!\n");
bootstage_error(BOOTSTAGE_ID_FIT_LOADADDR);
return 1;
}
break;
#endif
#ifdef CONFIG_ANDROID_BOOT_IMAGE
case IMAGE_FORMAT_ANDROID:
images.os.type = IH_TYPE_KERNEL;
images.os.comp = IH_COMP_NONE;
images.os.os = IH_OS_LINUX;
images.os.end = android_image_get_end(os_hdr);
images.os.load = android_image_get_kload(os_hdr);
images.ep = images.os.load;
ep_found = true;
break;
#endif
default:
puts("ERROR: unknown image format type!\n");
return 1;
}
/* If we have a valid setup.bin, we will use that for entry (x86) */
if (images.os.arch == IH_ARCH_I386 ||
images.os.arch == IH_ARCH_X86_64) {
ulong len;
ret = boot_get_setup(&images, IH_ARCH_I386, &images.ep, &len);
if (ret < 0 && ret != -ENOENT) {
puts("Could not find a valid setup.bin for x86\n");
return 1;
}
/* Kernel entry point is the setup.bin */
} else if (images.legacy_hdr_valid) {
images.ep = image_get_ep(&images.legacy_hdr_os_copy);
#if IMAGE_ENABLE_FIT
} else if (images.fit_uname_os) {
int ret;
ret = fit_image_get_entry(images.fit_hdr_os,
images.fit_noffset_os, &images.ep);
if (ret) {
puts("Can't get entry point property!\n");
return 1;
}
#endif
} else if (!ep_found) {
puts("Could not find kernel entry point!\n");
return 1;
}
if (images.os.type == IH_TYPE_KERNEL_NOLOAD) {
if (CONFIG_IS_ENABLED(CMD_BOOTI) &&
images.os.arch == IH_ARCH_ARM64) {
ulong image_addr;
ulong image_size;
ret = booti_setup(images.os.image_start, &image_addr,
&image_size, true);
if (ret != 0)
return 1;
images.os.type = IH_TYPE_KERNEL;
images.os.load = image_addr;
images.ep = image_addr;
} else {
images.os.load = images.os.image_start;
images.ep += images.os.image_start;
}
}
images.os.start = map_to_sysmem(os_hdr);
return 0;
}
int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
ulong tmp_img_addr, img_data, img_len;
void *buf;
int conf_noffset;
int fit_img_result;
char *uname, *name;
int err;
int devnum = 0; /* TODO support multi fpga platforms */
const fpga_desc * const desc = fpga_get_desc(devnum);
xilinx_desc *desc_xilinx = desc->devdesc;
/* Check to see if the images struct has a FIT configuration */
if (!genimg_has_config(images)) {
debug("## FIT configuration was not specified\n");
return 0;
}
/*
* Obtain the os FIT header from the images struct
* copy from dataflash if needed
*/
tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
tmp_img_addr = genimg_get_image(tmp_img_addr);
buf = map_sysmem(tmp_img_addr, 0);
/*
* Check image type. For FIT images get FIT node
* and attempt to locate a generic binary.
*/
switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_FIT:
conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
err = fdt_get_string_index(buf, conf_noffset, FIT_FPGA_PROP, 0,
(const char **)&uname);
if (err < 0) {
debug("## FPGA image is not specified\n");
return 0;
}
fit_img_result = fit_image_load(images,
tmp_img_addr,
(const char **)&uname,
&(images->fit_uname_cfg),
arch,
IH_TYPE_FPGA,
BOOTSTAGE_ID_FPGA_INIT,
FIT_LOAD_OPTIONAL_NON_ZERO,
&img_data, &img_len);
debug("FPGA image (%s) loaded to 0x%lx/size 0x%lx\n",
uname, img_data, img_len);
if (fit_img_result < 0) {
/* Something went wrong! */
return fit_img_result;
}
if (img_len >= desc_xilinx->size) {
name = "full";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_FULL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
img_len, BIT_FULL);
} else {
name = "partial";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_PARTIAL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
img_len, BIT_PARTIAL);
}
printf(" Programming %s bitstream... ", name);
if (err)
printf("failed\n");
else
printf("OK\n");
break;
default:
printf("The given image format is not supported (corrupt?)\n");
return 1;
}
return 0;
}
/**
* boot_get_ramdisk - main ramdisk handling routine
* @argc: command argument count
* @argv: command argument list
* @images: pointer to the bootm images structure
* @arch: expected ramdisk architecture
* @rd_start: pointer to a ulong variable, will hold ramdisk start address
* @rd_end: pointer to a ulong variable, will hold ramdisk end
*
* boot_get_ramdisk() is responsible for finding a valid ramdisk image.
* Curently supported are the following ramdisk sources:
* - multicomponent kernel/ramdisk image,
* - commandline provided address of decicated ramdisk image.
*
* returns:
* 0, if ramdisk image was found and valid, or skiped
* rd_start and rd_end are set to ramdisk start/end addresses if
* ramdisk image is found and valid
*
* 1, if ramdisk image is found but corrupted, or invalid
* rd_start and rd_end are set to 0 if no ramdisk exists
*/
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end)
{
ulong rd_addr, rd_load;
ulong rd_data, rd_len;
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
const image_header_t *rd_hdr;
#endif
void *buf;
#ifdef CONFIG_SUPPORT_RAW_INITRD
char *end;
#endif
#if defined(CONFIG_FIT)
const char *fit_uname_config = images->fit_uname_cfg;
const char *fit_uname_ramdisk = NULL;
ulong default_addr;
int rd_noffset;
#endif
const char *select = NULL;
*rd_start = 0;
*rd_end = 0;
if (argc >= 2)
select = argv[1];
/*
* Look for a '-' which indicates to ignore the
* ramdisk argument
*/
if (select && strcmp(select, "-") == 0) {
debug("## Skipping init Ramdisk\n");
rd_len = rd_data = 0;
} else if (select || genimg_has_config(images)) {
#if defined(CONFIG_FIT)
if (select) {
/*
* If the init ramdisk comes from the FIT image and
* the FIT image address is omitted in the command
* line argument, try to use os FIT image address or
* default load address.
*/
if (images->fit_uname_os)
default_addr = (ulong)images->fit_hdr_os;
else
default_addr = load_addr;
if (fit_parse_conf(select, default_addr,
&rd_addr, &fit_uname_config)) {
debug("* ramdisk: config '%s' from image at "
"0x%08lx\n",
fit_uname_config, rd_addr);
} else if (fit_parse_subimage(select, default_addr,
&rd_addr, &fit_uname_ramdisk)) {
debug("* ramdisk: subimage '%s' from image at "
"0x%08lx\n",
fit_uname_ramdisk, rd_addr);
} else
#endif
{
rd_addr = simple_strtoul(select, NULL, 16);
debug("* ramdisk: cmdline image address = "
"0x%08lx\n",
rd_addr);
}
#if defined(CONFIG_FIT)
} else {
/* use FIT configuration provided in first bootm
* command argument. If the property is not defined,
* quit silently.
*/
rd_addr = map_to_sysmem(images->fit_hdr_os);
rd_noffset = fit_get_node_from_config(images,
FIT_RAMDISK_PROP, rd_addr);
if (rd_noffset == -ENOLINK)
return 0;
else if (rd_noffset < 0)
return 1;
}
#endif
/* copy from dataflash if needed */
rd_addr = genimg_get_image(rd_addr);
/*
* Check if there is an initrd image at the
* address provided in the second bootm argument
* check image type, for FIT images get FIT node.
*/
buf = map_sysmem(rd_addr, 0);
switch (genimg_get_format(buf)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
printf("## Loading init Ramdisk from Legacy "
"Image at %08lx ...\n", rd_addr);
bootstage_mark(BOOTSTAGE_ID_CHECK_RAMDISK);
rd_hdr = image_get_ramdisk(rd_addr, arch,
images->verify);
if (rd_hdr == NULL)
return 1;
rd_data = image_get_data(rd_hdr);
rd_len = image_get_data_size(rd_hdr);
rd_load = image_get_load(rd_hdr);
break;
#endif
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
rd_noffset = fit_image_load(images,
rd_addr, &fit_uname_ramdisk,
&fit_uname_config, arch,
IH_TYPE_RAMDISK,
BOOTSTAGE_ID_FIT_RD_START,
FIT_LOAD_IGNORED, &rd_data, &rd_len);
if (rd_noffset < 0)
return 1;
images->fit_hdr_rd = map_sysmem(rd_addr, 0);
images->fit_uname_rd = fit_uname_ramdisk;
images->fit_noffset_rd = rd_noffset;
break;
#endif
default:
#ifdef CONFIG_SUPPORT_RAW_INITRD
end = NULL;
if (select)
end = strchr(select, ':');
if (end) {
rd_len = simple_strtoul(++end, NULL, 16);
rd_data = rd_addr;
} else
#endif
{
puts("Wrong Ramdisk Image Format\n");
rd_data = rd_len = rd_load = 0;
return 1;
}
}
} else if (images->legacy_hdr_valid &&
image_check_type(&images->legacy_hdr_os_copy,
IH_TYPE_MULTI)) {
/*
* Now check if we have a legacy mult-component image,
* get second entry data start address and len.
*/
bootstage_mark(BOOTSTAGE_ID_RAMDISK);
printf("## Loading init Ramdisk from multi component "
"Legacy Image at %08lx ...\n",
(ulong)images->legacy_hdr_os);
image_multi_getimg(images->legacy_hdr_os, 1, &rd_data, &rd_len);
}
#ifdef CONFIG_ANDROID_BOOT_IMAGE
else if ((genimg_get_format(images) == IMAGE_FORMAT_ANDROID) &&
(!android_image_get_ramdisk((void *)images->os.start,
&rd_data, &rd_len))) {
/* empty */
}
#endif
else {
/*
* no initrd image
*/
bootstage_mark(BOOTSTAGE_ID_NO_RAMDISK);
rd_len = rd_data = 0;
}
if (!rd_data) {
debug("## No init Ramdisk\n");
} else {
*rd_start = rd_data;
*rd_end = rd_data + rd_len;
}
debug(" ramdisk start = 0x%08lx, ramdisk end = 0x%08lx\n",
*rd_start, *rd_end);
return 0;
}
int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
/*
* These variables are used to hold the current image location
* in system memory.
*/
ulong tmp_img_addr;
/*
* These two variables are requirements for fit_image_load, but
* their values are not used
*/
ulong img_data, img_len;
void *buf;
int loadables_index;
int conf_noffset;
int fit_img_result;
char *uname;
/* Check to see if the images struct has a FIT configuration */
if (!genimg_has_config(images)) {
debug("## FIT configuration was not specified\n");
return 0;
}
/*
* Obtain the os FIT header from the images struct
* copy from dataflash if needed
*/
tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
tmp_img_addr = genimg_get_image(tmp_img_addr);
buf = map_sysmem(tmp_img_addr, 0);
/*
* Check image type. For FIT images get FIT node
* and attempt to locate a generic binary.
*/
switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_FIT:
conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
for (loadables_index = 0;
fdt_get_string_index(buf, conf_noffset,
FIT_LOADABLE_PROP,
loadables_index,
(const char **)&uname) == 0;
loadables_index++)
{
fit_img_result = fit_image_load(images,
tmp_img_addr,
(const char **)&uname,
&(images->fit_uname_cfg), arch,
IH_TYPE_LOADABLE,
BOOTSTAGE_ID_FIT_LOADABLE_START,
FIT_LOAD_OPTIONAL_NON_ZERO,
&img_data, &img_len);
if (fit_img_result < 0) {
/* Something went wrong! */
return fit_img_result;
}
}
break;
default:
printf("The given image format is not supported (corrupt?)\n");
return 1;
}
return 0;
}
