static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
{
int ret = 0;
switch (adc) {
case MAX8997_ADC_GROUND:
ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true);
break;
case MAX8997_ADC_MHL:
max8997_muic_handle_mhl(info, true);
break;
case MAX8997_ADC_JIG_USB_1:
case MAX8997_ADC_JIG_USB_2:
ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, true);
break;
case MAX8997_ADC_DESKDOCK:
case MAX8997_ADC_CARDOCK:
ret = max8997_muic_handle_dock(info, adc, true);
break;
case MAX8997_ADC_JIG_UART:
ret = max8997_muic_handle_jig_uart(info, true);
break;
case MAX8997_ADC_OPEN:
ret = max8997_muic_handle_adc_detach(info);
break;
default:
break;
}
info->pre_adc = adc;
return ret;
}
static int max8997_muic_adc_handler(struct max8997_muic_info *info)
{
int cable_type;
bool attached;
int ret = 0;
/* Check cable state which is either detached or attached */
cable_type = max8997_muic_get_cable_type(info,
MAX8997_CABLE_GROUP_ADC, &attached);
switch (cable_type) {
case MAX8997_MUIC_ADC_GROUND:
ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached);
if (ret < 0)
return ret;
break;
case MAX8997_MUIC_ADC_MHL:
extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
ret = max8997_muic_handle_usb(info,
MAX8997_USB_DEVICE, attached);
if (ret < 0)
return ret;
break;
case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
ret = max8997_muic_handle_dock(info, cable_type, attached);
if (ret < 0)
return ret;
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF:
ret = max8997_muic_handle_jig_uart(info, attached);
break;
case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON:
case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON:
case MAX8997_MUIC_ADC_RESERVED_ACC_1:
case MAX8997_MUIC_ADC_RESERVED_ACC_2:
case MAX8997_MUIC_ADC_RESERVED_ACC_3:
case MAX8997_MUIC_ADC_RESERVED_ACC_4:
case MAX8997_MUIC_ADC_RESERVED_ACC_5:
case MAX8997_MUIC_ADC_CEA936_AUDIO:
case MAX8997_MUIC_ADC_PHONE_POWERED_DEV:
case MAX8997_MUIC_ADC_TTY_CONVERTER:
case MAX8997_MUIC_ADC_UART_CABLE:
case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG:
case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG:
case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE:
/*
* This cable isn't used in general case if it is specially
* needed to detect additional cable, should implement
* proper operation when this cable is attached/detached.
*/
dev_info(info->dev,
"cable is %s but it isn't used (type:0x%x)\n",
attached ? "attached" : "detached", cable_type);
return -EAGAIN;
default:
dev_err(info->dev,
"failed to detect %s unknown cable (type:0x%x)\n",
attached ? "attached" : "detached", cable_type);
return -EINVAL;
}
return 0;
}
