/*
* Checkup routine
*/
int mbedtls_x509_self_test( int verbose )
{
#if defined(MBEDTLS_CERTS_C) && defined(MBEDTLS_SHA256_C)
int ret;
uint32_t flags;
mbedtls_x509_crt cacert;
mbedtls_x509_crt clicert;
if( verbose != 0 )
mbedtls_printf( " X.509 certificate load: " );
mbedtls_x509_crt_init( &clicert );
ret = mbedtls_x509_crt_parse( &clicert, (const unsigned char *) mbedtls_test_cli_crt,
mbedtls_test_cli_crt_len );
if( ret != 0 )
{
if( verbose != 0 )
mbedtls_printf( "failed\n" );
return( ret );
}
mbedtls_x509_crt_init( &cacert );
ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_ca_crt,
mbedtls_test_ca_crt_len );
if( ret != 0 )
{
if( verbose != 0 )
mbedtls_printf( "failed\n" );
return( ret );
}
if( verbose != 0 )
mbedtls_printf( "passed\n X.509 signature verify: ");
ret = mbedtls_x509_crt_verify( &clicert, &cacert, NULL, NULL, &flags, NULL, NULL );
if( ret != 0 )
{
if( verbose != 0 )
mbedtls_printf( "failed\n" );
return( ret );
}
if( verbose != 0 )
mbedtls_printf( "passed\n\n");
mbedtls_x509_crt_free( &cacert );
mbedtls_x509_crt_free( &clicert );
return( 0 );
#else
((void) verbose);
return( 0 );
#endif /* MBEDTLS_CERTS_C && MBEDTLS_SHA1_C */
}
int coap_security_handler_configure_keys( coap_security_t *sec, coap_security_keys_t keys )
{
int ret = -1;
switch( sec->_conn_mode ){
case Certificate:{
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if( mbedtls_x509_crt_parse( &sec->_cacert, keys._server_cert,
keys._server_cert_len ) < 0 ){
break;
}
if( mbedtls_x509_crt_parse( &sec->_owncert, keys._pub_cert_or_identifier,
keys._pub_len ) < 0 ){
break;
}
if( mbedtls_pk_parse_key(&sec->_pkey, keys._priv, keys._priv_len, NULL, 0) < 0){
break;
}
//TODO: If needed in server mode, this won't work
if( 0 != mbedtls_ssl_conf_own_cert(&sec->_conf, &sec->_owncert, &sec->_pkey) ){
break;
}
//TODO: use MBEDTLS_SSL_VERIFY_REQUIRED instead of optional
mbedtls_ssl_conf_authmode( &sec->_conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
mbedtls_ssl_conf_ca_chain( &sec->_conf, &sec->_cacert, NULL );
ret = 0;
#endif
break;
}
case PSK: {
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
if( 0 != mbedtls_ssl_conf_psk(&sec->_conf, keys._priv, keys._priv_len, keys._pub_cert_or_identifier, keys._pub_len) ){
break;
}
mbedtls_ssl_conf_ciphersuites(&sec->_conf, PSK_SUITES);
ret = 0;
#endif
break;
}
case ECJPAKE: {
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
if( mbedtls_ssl_set_hs_ecjpake_password(&sec->_ssl, keys._priv, keys._priv_len) != 0 ){
return -1;
}
mbedtls_ssl_conf_ciphersuites(&sec->_conf, ECJPAKE_SUITES);
//NOTE: If thread starts supporting PSK in other modes, then this will be needed!
mbedtls_ssl_conf_export_keys_cb(&sec->_conf,
export_key_block,
&sec->_keyblk);
ret = 0;
#endif
break;
}
default:
break;
}
return ret;
}
static int tls_server_listen(const char *host, const char *port)
{
int ret = mbedtls_ctr_drbg_seed(
&stls.ctr_drbg,
mbedtls_entropy_func,
&stls.entropy,
(uint8_t*)seed, strlen(seed));
if (ret)
return -1;
ret = mbedtls_x509_crt_parse(&stls.cacert, ca_cert, ca_cert_len);
if (ret) {
printf("cacert parse failed\n");
return -1;
}
ret = mbedtls_x509_crt_parse(&stls.srvcert, server_cert, server_cert_len);
if (ret) {
printf("servercert parse failed\n");
return -1;
}
ret = mbedtls_pk_parse_key(&stls.pkey, server_key, server_key_len, NULL, 0);
if (ret) {
printf("key parse failed\n");
return -1;
}
ret = mbedtls_ssl_config_defaults(
&stls.conf,
MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if (ret) {
printf("defaults failed\n");
return -1;
}
mbedtls_ssl_conf_rng(&stls.conf, mbedtls_ctr_drbg_random, &stls.ctr_drbg);
mbedtls_ssl_conf_dbg(&stls.conf, tls_debug, NULL);
mbedtls_debug_set_threshold(1);
mbedtls_ssl_conf_ca_chain(&stls.conf, stls.cacert.next, NULL);
ret = mbedtls_ssl_conf_own_cert(&stls.conf, &stls.srvcert, &stls.pkey);
if (ret) {
printf("setting own cert failed\n");
return -1;
}
ret = mbedtls_net_bind(&stls.fd, host, port, MBEDTLS_NET_PROTO_TCP);
if (ret) {
printf("bind failed\n");
return -1;
}
return stls.fd.fd;
}
int Dtls::SetApplicationCoapSecureKeys(void)
{
int rval = 0;
VerifyOrExit(&mCipherSuites[0] != NULL, rval = MBEDTLS_ERR_SSL_BAD_INPUT_DATA);
switch (mCipherSuites[0])
{
case MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8:
#ifdef MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
if (mCaChainSrc != NULL)
{
rval = mbedtls_x509_crt_parse(&mCaChain, static_cast<const unsigned char *>(mCaChainSrc),
static_cast<size_t>(mCaChainLength));
VerifyOrExit(rval == 0);
mbedtls_ssl_conf_ca_chain(&mConf, &mCaChain, NULL);
}
if (mOwnCertSrc != NULL && mPrivateKeySrc != NULL)
{
rval = mbedtls_x509_crt_parse(&mOwnCert, static_cast<const unsigned char *>(mOwnCertSrc),
static_cast<size_t>(mOwnCertLength));
VerifyOrExit(rval == 0);
rval = mbedtls_pk_parse_key(&mPrivateKey, static_cast<const unsigned char *>(mPrivateKeySrc),
static_cast<size_t>(mPrivateKeyLength), NULL, 0);
VerifyOrExit(rval == 0);
rval = mbedtls_ssl_conf_own_cert(&mConf, &mOwnCert, &mPrivateKey);
VerifyOrExit(rval == 0);
}
#endif // MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
break;
case MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8:
#ifdef MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
rval = mbedtls_ssl_conf_psk(&mConf, static_cast<const unsigned char *>(mPreSharedKey), mPreSharedKeyLength,
static_cast<const unsigned char *>(mPreSharedKeyIdentity), mPreSharedKeyIdLength);
VerifyOrExit(rval == 0);
#endif // MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
break;
default:
otLogCritCoap("Application Coap Secure DTLS: Not supported cipher.");
rval = MBEDTLS_ERR_SSL_BAD_INPUT_DATA;
ExitNow();
break;
}
exit:
return rval;
}
static struct altcp_tls_config *
altcp_tls_create_config_client_common(const u8_t *ca, size_t ca_len, int is_2wayauth)
{
int ret;
struct altcp_tls_config *conf = altcp_tls_create_config(0, is_2wayauth, is_2wayauth, ca != NULL);
if (conf == NULL) {
return NULL;
}
/* Initialize the CA certificate if provided
* CA certificate is optional (to save memory) but recommended for production environment
* Without CA certificate, connection will be prone to man-in-the-middle attacks */
if (ca) {
mbedtls_x509_crt_init(conf->ca);
ret = mbedtls_x509_crt_parse(conf->ca, ca, ca_len);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_x509_crt_parse ca failed: %d 0x%x", ret, -1*ret));
altcp_mbedtls_free_config(conf);
return NULL;
}
mbedtls_ssl_conf_ca_chain(&conf->conf, conf->ca, NULL);
}
return conf;
}
static unsigned int _DTLSVerifyOptions_set(dtls_session_t *p_dtls_session,
unsigned char *p_ca_cert_pem)
{
int result;
unsigned int err_code = DTLS_SUCCESS;
#ifdef MBEDTLS_X509_CRT_PARSE_C
if (p_ca_cert_pem != NULL) {
#ifndef TEST_COAP_DAILY
mbedtls_ssl_conf_authmode(&p_dtls_session->conf, MBEDTLS_SSL_VERIFY_REQUIRED);
#else
mbedtls_ssl_conf_authmode(&p_dtls_session->conf, MBEDTLS_SSL_VERIFY_OPTIONAL);
#endif
DTLS_TRC("Call mbedtls_ssl_conf_authmode\r\n");
DTLS_TRC("x509 ca cert pem len %d\r\n%s\r\n", (int)strlen((char *)p_ca_cert_pem) + 1, p_ca_cert_pem);
result = mbedtls_x509_crt_parse(&p_dtls_session->cacert,
p_ca_cert_pem,
strlen((const char *)p_ca_cert_pem) + 1);
DTLS_TRC("mbedtls_x509_crt_parse result 0x%04x\r\n", result);
if (0 != result) {
err_code = DTLS_INVALID_CA_CERTIFICATE;
} else {
mbedtls_ssl_conf_ca_chain(&p_dtls_session->conf, &p_dtls_session->cacert, NULL);
}
} else
#endif
{
mbedtls_ssl_conf_authmode(&p_dtls_session->conf, MBEDTLS_SSL_VERIFY_NONE);
}
return err_code;
}
/** Import or create empty */
X509CertList(const std::string& certstr, bool allowempty = false)
{
if ((allowempty) && (certstr.empty()))
return;
int ret = mbedtls_x509_crt_parse(get(), reinterpret_cast<const unsigned char*>(certstr.c_str()), certstr.size()+1);
ThrowOnError(ret, "Unable to load certificates");
}
static bool
pkcs11_get_x509_cert(pkcs11h_certificate_t pkcs11_cert, mbedtls_x509_crt *cert)
{
unsigned char *cert_blob = NULL;
size_t cert_blob_size = 0;
bool ret = false;
if (pkcs11h_certificate_getCertificateBlob(pkcs11_cert, NULL,
&cert_blob_size) != CKR_OK)
{
msg(M_WARN, "PKCS#11: Cannot retrieve certificate object size");
goto cleanup;
}
check_malloc_return((cert_blob = calloc(1, cert_blob_size)));
if (pkcs11h_certificate_getCertificateBlob(pkcs11_cert, cert_blob,
&cert_blob_size) != CKR_OK)
{
msg(M_WARN, "PKCS#11: Cannot retrieve certificate object");
goto cleanup;
}
if (!mbed_ok(mbedtls_x509_crt_parse(cert, cert_blob, cert_blob_size)))
{
msg(M_WARN, "PKCS#11: Could not parse certificate");
goto cleanup;
}
ret = true;
cleanup:
free(cert_blob);
return ret;
}
static UA_StatusCode
certificateVerification_verifyApplicationURI(void *verificationContext,
const UA_ByteString *certificate,
const UA_String *applicationURI) {
CertInfo *ci = (CertInfo*)verificationContext;
if(!ci)
return UA_STATUSCODE_BADINTERNALERROR;
/* Parse the certificate */
mbedtls_x509_crt remoteCertificate;
mbedtls_x509_crt_init(&remoteCertificate);
int mbedErr = mbedtls_x509_crt_parse(&remoteCertificate, certificate->data,
certificate->length);
if(mbedErr)
return UA_STATUSCODE_BADSECURITYCHECKSFAILED;
/* Poor man's ApplicationUri verification. mbedTLS does not parse all fields
* of the Alternative Subject Name. Instead test whether the URI-string is
* present in the v3_ext field in general.
*
* TODO: Improve parsing of the Alternative Subject Name */
UA_StatusCode retval = UA_STATUSCODE_GOOD;
if(bstrstr(remoteCertificate.v3_ext.p, remoteCertificate.v3_ext.len,
applicationURI->data, applicationURI->length) == NULL)
retval = UA_STATUSCODE_BADCERTIFICATEURIINVALID;
mbedtls_x509_crt_free(&remoteCertificate);
return retval;
}
void* ssl_socket_init(int fd, const char *domain)
{
struct ssl_state *state = (struct ssl_state*)calloc(1, sizeof(*state));
state->domain = domain;
mbedtls_debug_set_threshold(DEBUG_LEVEL);
mbedtls_net_init(&state->net_ctx);
mbedtls_ssl_init(&state->ctx);
mbedtls_ssl_config_init(&state->conf);
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_x509_crt_init(&state->ca);
#endif
mbedtls_ctr_drbg_init(&state->ctr_drbg);
mbedtls_entropy_init(&state->entropy);
state->net_ctx.fd = fd;
if (mbedtls_ctr_drbg_seed(&state->ctr_drbg, mbedtls_entropy_func, &state->entropy, (const unsigned char*)pers, strlen(pers)) != 0)
goto error;
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if (mbedtls_x509_crt_parse(&state->ca, (const unsigned char*)cacert_pem, sizeof(cacert_pem) / sizeof(cacert_pem[0])) < 0)
goto error;
#endif
return state;
error:
if (state)
free(state);
return NULL;
}
void StreamPeerMbedTLS::_load_certs(const PoolByteArray &p_array) {
int arr_len = p_array.size();
PoolByteArray::Read r = p_array.read();
int err = mbedtls_x509_crt_parse(&cacert, &r[0], arr_len);
if (err != 0) {
WARN_PRINTS("Error parsing some certificates: " + itos(err));
}
}
/**
* @brief Initation the SSL client.
* @param[in] ssl: mbedtls ssl struct.
* @param[in] tcp_fd. The underlying file descriptor.
* @param[in] custom_config: custome config.
* @return The result. 0 is ok.
*/
static int nghttp2_ssl_client_init(mbedtls_ssl_context *ssl,
mbedtls_net_context *tcp_fd,
http2_ssl_custom_conf_t *custom_config)
{
int ret = -1;
http2_verify_source_t *verify_source = &custom_config->verify_source;
mbedtls_ssl_config *conf = &(custom_config->conf);
/*
* 0. Initialize the RNG and the session data
*/
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold(DEBUG_LEVEL);
#endif
mbedtls_net_init( tcp_fd );
mbedtls_ssl_init( ssl );
mbedtls_ssl_config_init( conf );
mbedtls_x509_crt_init( &(verify_source->cacertl) );
mbedtls_ctr_drbg_init( &ctr_drbg );
NGHTTP2_DBG( "\n . Seeding the random number generator..." );
mbedtls_entropy_init( &entropy );
if ( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 ) {
NGHTTP2_DBG( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
return ret;
}
NGHTTP2_DBG( " ok\n" );
/*
* 0. Initialize certificates
*/
NGHTTP2_DBG( " . Loading the CA root certificate ..." );
if (NULL != verify_source->trusted_ca_crt) {
if (0 != (ret = mbedtls_x509_crt_parse(&verify_source->cacertl,
(unsigned char *)verify_source->trusted_ca_crt,
strlen(verify_source->trusted_ca_crt) + 1))) {
NGHTTP2_DBG(" failed ! x509parse_crt returned -0x%04x", -ret);
return ret;
}
}
NGHTTP2_DBG( " ok (%d skipped)", ret );
return 0;
}
/** Create new TLS configuration
* This is a suboptimal version that gets the encrypted private key and its password,
* as well as the server certificate.
*/
struct altcp_tls_config *
altcp_tls_create_config_server_privkey_cert(const u8_t *privkey, size_t privkey_len,
const u8_t *privkey_pass, size_t privkey_pass_len,
const u8_t *cert, size_t cert_len)
{
int ret;
mbedtls_x509_crt *srvcert;
mbedtls_pk_context *pkey;
struct altcp_tls_config *conf = altcp_tls_create_config(1, 1, 1, 0);
if (conf == NULL) {
return NULL;
}
srvcert = conf->cert;
mbedtls_x509_crt_init(srvcert);
pkey = conf->pkey;
mbedtls_pk_init(pkey);
/* Load the certificates and private key */
ret = mbedtls_x509_crt_parse(srvcert, cert, cert_len);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_x509_crt_parse failed: %d\n", ret));
altcp_mbedtls_free_config(conf);
return NULL;
}
ret = mbedtls_pk_parse_key(pkey, (const unsigned char *) privkey, privkey_len, privkey_pass, privkey_pass_len);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_pk_parse_public_key failed: %d\n", ret));
mbedtls_x509_crt_free(srvcert);
altcp_mbedtls_free_config(conf);
return NULL;
}
mbedtls_ssl_conf_ca_chain(&conf->conf, srvcert->next, NULL);
ret = mbedtls_ssl_conf_own_cert(&conf->conf, srvcert, pkey);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_ssl_conf_own_cert failed: %d\n", ret));
mbedtls_x509_crt_free(srvcert);
mbedtls_pk_free(pkey);
altcp_mbedtls_free_config(conf);
return NULL;
}
return conf;
}
int x509_pm_load(X509 *x, const unsigned char *buffer, int len)
{
int ret;
unsigned char *load_buf;
struct x509_pm *x509_pm = (struct x509_pm *)x->x509_pm;
if (x509_pm->x509_crt)
mbedtls_x509_crt_free(x509_pm->x509_crt);
if (!x509_pm->x509_crt) {
x509_pm->x509_crt = ssl_mem_malloc(sizeof(mbedtls_x509_crt));
if (!x509_pm->x509_crt) {
SSL_DEBUG(SSL_PLATFORM_ERROR_LEVEL, "no enough memory > (x509_pm->x509_crt)");
goto no_mem;
}
}
load_buf = ssl_mem_malloc(len + 1);
if (!load_buf) {
SSL_DEBUG(SSL_PLATFORM_ERROR_LEVEL, "no enough memory > (load_buf)");
goto failed;
}
ssl_memcpy(load_buf, buffer, len);
load_buf[len] = '\0';
mbedtls_x509_crt_init(x509_pm->x509_crt);
ret = mbedtls_x509_crt_parse(x509_pm->x509_crt, load_buf, len + 1);
ssl_mem_free(load_buf);
if (ret) {
SSL_DEBUG(SSL_PLATFORM_ERROR_LEVEL, "mbedtls_x509_crt_parse return -0x%x", -ret);
goto failed;
}
return 0;
failed:
mbedtls_x509_crt_free(x509_pm->x509_crt);
ssl_mem_free(x509_pm->x509_crt);
x509_pm->x509_crt = NULL;
no_mem:
return -1;
}
struct altcp_tls_config *
altcp_tls_create_config_client_2wayauth(const u8_t *ca, size_t ca_len, const u8_t *privkey, size_t privkey_len,
const u8_t *privkey_pass, size_t privkey_pass_len,
const u8_t *cert, size_t cert_len)
{
int ret;
struct altcp_tls_config *conf;
if (!cert || !privkey) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("altcp_tls_create_config_client_2wayauth: certificate and priv key required"));
return NULL;
}
conf = altcp_tls_create_config_client_common(ca, ca_len, 1);
if (conf == NULL) {
return NULL;
}
/* Initialize the client certificate and corresponding private key */
mbedtls_x509_crt_init(conf->cert);
ret = mbedtls_x509_crt_parse(conf->cert, cert, cert_len);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_x509_crt_parse cert failed: %d 0x%x", ret, -1*ret));
altcp_mbedtls_free_config(conf->cert);
return NULL;
}
mbedtls_pk_init(conf->pkey);
ret = mbedtls_pk_parse_key(conf->pkey, privkey, privkey_len, privkey_pass, privkey_pass_len);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_pk_parse_key failed: %d 0x%x", ret, -1*ret));
altcp_mbedtls_free_config(conf);
return NULL;
}
ret = mbedtls_ssl_conf_own_cert(&conf->conf, conf->cert, conf->pkey);
if (ret != 0) {
LWIP_DEBUGF(ALTCP_MBEDTLS_DEBUG, ("mbedtls_ssl_conf_own_cert failed: %d 0x%x", ret, -1*ret));
altcp_mbedtls_free_config(conf);
return NULL;
}
return conf;
}
UA_StatusCode
UA_CertificateVerification_Trustlist(UA_CertificateVerification *cv,
const UA_ByteString *certificateTrustList,
size_t certificateTrustListSize,
const UA_ByteString *certificateRevocationList,
size_t certificateRevocationListSize) {
CertInfo *ci = (CertInfo*)UA_malloc(sizeof(CertInfo));
if(!ci)
return UA_STATUSCODE_BADOUTOFMEMORY;
mbedtls_x509_crt_init(&ci->certificateTrustList);
mbedtls_x509_crl_init(&ci->certificateRevocationList);
cv->context = (void*)ci;
if(certificateTrustListSize > 0)
cv->verifyCertificate = certificateVerification_verify;
else
cv->verifyCertificate = verifyCertificateAllowAll;
cv->deleteMembers = certificateVerification_deleteMembers;
cv->verifyApplicationURI = certificateVerification_verifyApplicationURI;
int err = 0;
for(size_t i = 0; i < certificateTrustListSize; i++) {
err = mbedtls_x509_crt_parse(&ci->certificateTrustList,
certificateTrustList[i].data,
certificateTrustList[i].length);
if(err)
goto error;
}
for(size_t i = 0; i < certificateRevocationListSize; i++) {
err = mbedtls_x509_crl_parse(&ci->certificateRevocationList,
certificateRevocationList[i].data,
certificateRevocationList[i].length);
if(err)
goto error;
}
return UA_STATUSCODE_GOOD;
error:
certificateVerification_deleteMembers(cv);
return UA_STATUSCODE_BADINTERNALERROR;
}
esp_err_t esp_tls_set_global_ca_store(const unsigned char *cacert_pem_buf, const unsigned int cacert_pem_bytes)
{
int ret;
if (cacert_pem_buf == NULL) {
ESP_LOGE(TAG, "cacert_pem_buf is null");
return ESP_ERR_INVALID_ARG;
}
if (global_cacert == NULL) {
ret = esp_tls_init_global_ca_store();
if (ret != ESP_OK) {
return ret;
}
}
ret = mbedtls_x509_crt_parse(global_cacert, cacert_pem_buf, cacert_pem_bytes);
if (ret < 0) {
ESP_LOGE(TAG, "mbedtls_x509_crt_parse returned -0x%x\n\n", -ret);
mbedtls_x509_crt_free(global_cacert);
global_cacert = NULL;
return ESP_FAIL;
} else if (ret > 0) {
ESP_LOGE(TAG, "mbedtls_x509_crt_parse was partly successful. No. of failed certificates: %d", ret);
}
return ESP_OK;
}
static value cert_add_pem( value cert, value data ){
mbedtls_x509_crt *crt;
int r, len;
unsigned char *buf;
val_check(data,string);
if( !val_is_null(cert) ){
val_check_kind(cert,k_cert);
crt = val_cert(cert);
if( !crt )
neko_error();
}else{
crt = (mbedtls_x509_crt *)alloc(sizeof(mbedtls_x509_crt));
mbedtls_x509_crt_init( crt );
cert = alloc_abstract(k_cert, crt);
val_gc(cert,free_cert);
}
len = val_strlen(data)+1;
buf = (unsigned char *)alloc(len);
memcpy(buf, val_string(data), len-1);
buf[len-1] = '\0';
if( (r = mbedtls_x509_crt_parse(crt, buf, len)) < 0 )
return ssl_error(r);
return cert;
}
int ssl_connect(SSLConnection* conn, const char* host, int port) {
int ret;
char buffer[8];
ret = mbedtls_ctr_drbg_seed(&conn->drbg_ctx, mbedtls_entropy_func,
&conn->entropy_ctx, (const unsigned char *) pers, strlen(pers));
if (ret < 0) {
return -1;
}
ret = mbedtls_x509_crt_parse(&conn->ca_cert,
(const unsigned char *) conn->ca_cert_str,
strlen(conn->ca_cert_str) + 1);
if (ret < 0) {
return handle_error(ret);
}
ret = mbedtls_x509_crt_parse(&conn->client_cert,
(const unsigned char *) conn->client_cert_str,
strlen(conn->client_cert_str) + 1);
if (ret < 0) {
return handle_error(ret);
}
ret = mbedtls_pk_parse_key(&conn->client_key,
(const unsigned char *) conn->client_key_str,
strlen(conn->client_key_str) + 1, NULL, 0);
if (ret != 0) {
return handle_error(ret);
}
snprintf(buffer, sizeof(buffer), "%d", port);
ret = mbedtls_net_connect(&conn->net_ctx, host, buffer,
MBEDTLS_NET_PROTO_TCP);
if (ret != 0) {
return handle_error(ret);
}
ret = mbedtls_ssl_config_defaults(&conn->ssl_conf, MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM, MBEDTLS_SSL_PRESET_DEFAULT);
if (ret != 0) {
return handle_error(ret);
}
#ifdef MBEDTLS_DEBUG_C
mbedtls_ssl_conf_dbg(&conn->ssl_conf, my_debug, stdout);
mbedtls_debug_set_threshold(5);
#endif
mbedtls_ssl_conf_authmode(&conn->ssl_conf, MBEDTLS_SSL_VERIFY_REQUIRED);
mbedtls_ssl_conf_rng(&conn->ssl_conf, mbedtls_ctr_drbg_random,
&conn->drbg_ctx);
mbedtls_ssl_conf_read_timeout(&conn->ssl_conf, SSL_READ_TIMEOUT_MS);
mbedtls_ssl_conf_ca_chain(&conn->ssl_conf, &conn->ca_cert, NULL);
ret = mbedtls_ssl_conf_own_cert(&conn->ssl_conf, &conn->client_cert,
&conn->client_key);
if (ret != 0) {
return handle_error(ret);
}
ret = mbedtls_ssl_setup(&conn->ssl_ctx, &conn->ssl_conf);
if (ret != 0) {
return handle_error(ret);
}
ret = mbedtls_ssl_set_hostname(&conn->ssl_ctx, host);
if (ret != 0) {
return handle_error(ret);
}
mbedtls_ssl_set_bio(&conn->ssl_ctx, &conn->net_ctx, mbedtls_net_send, NULL,
mbedtls_net_recv_timeout);
while ((ret = mbedtls_ssl_handshake(&conn->ssl_ctx)) != 0) {
if (ret != MBEDTLS_ERR_SSL_WANT_READ
&& ret != MBEDTLS_ERR_SSL_WANT_WRITE) {
if (ret == MBEDTLS_ERR_X509_CERT_VERIFY_FAILED) {
return handle_error(ret);
}
}
handle_error(ret);
vTaskDelay(5000 / portTICK_PERIOD_MS);
}
mbedtls_ssl_get_record_expansion(&conn->ssl_ctx);
ret = mbedtls_ssl_get_verify_result(&conn->ssl_ctx);
if (ret != 0) {
return handle_error(ret);
}
return ret;
}
int main( void )
{
int ret, len, written;
mbedtls_net_context server_fd;
unsigned char buf[1024];
const char *pers = "pinning_client";
/* XXX create some state for our verify callback */
struct vrfy_state vrfy_state = {
.pins = pins,
};
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt cacert;
/* Ensure valid memory references */
mbedtls_net_init( &server_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
mbedtls_x509_crt_init( &cacert );
mbedtls_ctr_drbg_init( &ctr_drbg );
mbedtls_entropy_init( &entropy );
/*
* 0. Initialize the RNG and the session data
*/
mbedtls_printf( "\n . Seeding the random number generator..." );
fflush( stdout );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1. Load certificates
*/
mbedtls_printf( " . Loading the CA root certificate ..." );
fflush( stdout );
ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n", -ret );
goto exit;
}
mbedtls_printf( " ok (%d skipped)\n", ret );
/*
* 2. Start the TCP connection
*/
mbedtls_printf( " . Connecting to tcp/%s/%s...", SERVER_NAME, SERVER_PORT );
fflush( stdout );
if( ( ret = mbedtls_net_connect( &server_fd, SERVER_NAME,
SERVER_PORT, MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 3. Setup SSL/TSL stuff
*/
mbedtls_printf( " . Setting up the SSL/TLS structure..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold( DEBUG_LEVEL );
#endif
mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
/* XXX: register our certificate verification callback */
mbedtls_ssl_conf_verify( &conf, my_verify, &vrfy_state );
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_set_hostname( &ssl, SERVER_NAME ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &server_fd, mbedtls_net_send, mbedtls_net_recv, NULL );
mbedtls_printf( " ok\n" );
/*
* 4. Handshake
*/
mbedtls_printf( " . Performing the SSL/TLS handshake..." );
fflush( stdout );
while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", -ret );
goto exit;
}
}
mbedtls_printf( " ok\n" );
/*
* 5. Write request
*/
mbedtls_printf( " > Write to server:" );
fflush( stdout );
len = snprintf( (char *) buf, sizeof( buf ), GET_REQUEST );
if( len < 0 || (size_t) len > sizeof( buf ) )
{
mbedtls_printf( " failed\n ! buffer too small for request\n\n" );
goto exit;
}
for( written = 0; written < len; written += ret )
{
while( ( ret = mbedtls_ssl_write( &ssl, buf + written, len - written ) )
<= 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned -0x%x\n\n", -ret );
goto exit;
}
}
}
mbedtls_printf( " %d bytes written\n\n%s", written, (char *) buf );
/*
* 6. Read the HTTP response
*/
mbedtls_printf( " < Read from server:" );
fflush( stdout );
do
{
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
ret = mbedtls_ssl_read( &ssl, buf, len );
if( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE )
continue;
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
ret = 0;
goto close_notify;
case 0:
case MBEDTLS_ERR_NET_CONN_RESET:
mbedtls_printf( " connection was reset by peer\n" );
ret = 0;
goto exit;
default:
mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n", -ret );
goto exit;
}
}
len = ret;
buf[len] = '\0';
mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf );
/* End of message should be detected according to the syntax of the
* application protocol (eg HTTP), just use a dummy test here. */
if( ret > 0 && buf[len-1] == '\n' )
{
ret = 0;
break;
}
}
while( 1 );
/*
* 8. Done, cleanly close the connection
*/
close_notify:
mbedtls_printf( " . Closing the connection..." );
fflush( stdout );
/* No error checking, the connection might be closed already */
do ret = mbedtls_ssl_close_notify( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
ret = 0;
mbedtls_printf( " done\n" );
exit:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
mbedtls_printf("Last error was: %d - %s\n\n", ret, error_buf );
}
#endif
mbedtls_net_free( &server_fd );
mbedtls_x509_crt_free( &cacert );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
mbedtls_printf( " + Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
return( ret != 0 );
}
int dtlsclient_main( int argc, char *argv[] )
{
int ret, len;
mbedtls_net_context server_fd;
uint32_t flags;
unsigned char buf[1024];
const char *pers = "dtls_client";
int retry_left = MAX_RETRY;
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt cacert;
mbedtls_timing_delay_context timer;
((void) argc);
((void) argv);
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold( DEBUG_LEVEL );
#endif
/*
* 0. Initialize the RNG and the session data
*/
mbedtls_net_init( &server_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
mbedtls_x509_crt_init( &cacert );
mbedtls_ctr_drbg_init( &ctr_drbg );
mbedtls_printf( "\n . Seeding the random number generator..." );
fflush( stdout );
mbedtls_entropy_init( &entropy );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 0. Load certificates
*/
mbedtls_printf( " . Loading the CA root certificate ..." );
fflush( stdout );
ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n", -ret );
goto exit;
}
mbedtls_printf( " ok (%d skipped)\n", ret );
/*
* 1. Start the connection
*/
mbedtls_printf( " . Connecting to udp/%s/%s...", SERVER_NAME, SERVER_PORT );
fflush( stdout );
if( ( ret = mbedtls_net_connect( &server_fd, SERVER_ADDR,
SERVER_PORT, MBEDTLS_NET_PROTO_UDP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 2. Setup stuff
*/
mbedtls_printf( " . Setting up the DTLS structure..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_DATAGRAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
/* OPTIONAL is usually a bad choice for security, but makes interop easier
* in this simplified example, in which the ca chain is hardcoded.
* Production code should set a proper ca chain and use REQUIRED. */
mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_set_hostname( &ssl, SERVER_NAME ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &server_fd,
mbedtls_net_send, mbedtls_net_recv, mbedtls_net_recv_timeout );
mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay,
mbedtls_timing_get_delay );
mbedtls_printf( " ok\n" );
/*
* 4. Handshake
*/
mbedtls_printf( " . Performing the SSL/TLS handshake..." );
fflush( stdout );
do ret = mbedtls_ssl_handshake( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", -ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 5. Verify the server certificate
*/
mbedtls_printf( " . Verifying peer X.509 certificate..." );
/* In real life, we would have used MBEDTLS_SSL_VERIFY_REQUIRED so that the
* handshake would not succeed if the peer's cert is bad. Even if we used
* MBEDTLS_SSL_VERIFY_OPTIONAL, we would bail out here if ret != 0 */
if( ( flags = mbedtls_ssl_get_verify_result( &ssl ) ) != 0 )
{
char vrfy_buf[512];
mbedtls_printf( " failed\n" );
mbedtls_x509_crt_verify_info( vrfy_buf, sizeof( vrfy_buf ), " ! ", flags );
mbedtls_printf( "%s\n", vrfy_buf );
}
else
mbedtls_printf( " ok\n" );
/*
* 6. Write the echo request
*/
send_request:
mbedtls_printf( " > Write to server:" );
fflush( stdout );
len = sizeof( MESSAGE ) - 1;
do ret = mbedtls_ssl_write( &ssl, (unsigned char *) MESSAGE, len );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret );
goto exit;
}
len = ret;
mbedtls_printf( " %d bytes written\n\n%s\n\n", len, MESSAGE );
/*
* 7. Read the echo response
*/
mbedtls_printf( " < Read from server:" );
fflush( stdout );
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
do ret = mbedtls_ssl_read( &ssl, buf, len );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_TIMEOUT:
mbedtls_printf( " timeout\n\n" );
if( retry_left-- > 0 )
goto send_request;
goto exit;
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
ret = 0;
goto close_notify;
default:
mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n\n", -ret );
goto exit;
}
}
len = ret;
mbedtls_printf( " %d bytes read\n\n%s\n\n", len, buf );
/*
* 8. Done, cleanly close the connection
*/
close_notify:
mbedtls_printf( " . Closing the connection..." );
/* No error checking, the connection might be closed already */
do ret = mbedtls_ssl_close_notify( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
ret = 0;
mbedtls_printf( " done\n" );
/*
* 9. Final clean-ups and exit
*/
exit:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
mbedtls_printf( "Last error was: %d - %s\n\n", ret, error_buf );
}
#endif
mbedtls_net_free( &server_fd );
mbedtls_x509_crt_free( &cacert );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
mbedtls_printf( " + Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
/* Shell can not handle large exit numbers -> 1 for errors */
if( ret < 0 )
ret = 1;
return( ret );
}
static int create_ssl_handle(esp_tls_t *tls, const char *hostname, size_t hostlen, const esp_tls_cfg_t *cfg)
{
int ret;
mbedtls_net_init(&tls->server_fd);
tls->server_fd.fd = tls->sockfd;
mbedtls_ssl_init(&tls->ssl);
mbedtls_ctr_drbg_init(&tls->ctr_drbg);
mbedtls_ssl_config_init(&tls->conf);
mbedtls_entropy_init(&tls->entropy);
if ((ret = mbedtls_ctr_drbg_seed(&tls->ctr_drbg,
mbedtls_entropy_func, &tls->entropy, NULL, 0)) != 0) {
ESP_LOGE(TAG, "mbedtls_ctr_drbg_seed returned %d", ret);
goto exit;
}
/* Hostname set here should match CN in server certificate */
char *use_host = strndup(hostname, hostlen);
if (!use_host) {
goto exit;
}
if ((ret = mbedtls_ssl_set_hostname(&tls->ssl, use_host)) != 0) {
ESP_LOGE(TAG, "mbedtls_ssl_set_hostname returned -0x%x", -ret);
free(use_host);
goto exit;
}
free(use_host);
if ((ret = mbedtls_ssl_config_defaults(&tls->conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT)) != 0) {
ESP_LOGE(TAG, "mbedtls_ssl_config_defaults returned %d", ret);
goto exit;
}
#ifdef CONFIG_MBEDTLS_SSL_ALPN
if (cfg->alpn_protos) {
mbedtls_ssl_conf_alpn_protocols(&tls->conf, cfg->alpn_protos);
}
#endif
if (cfg->use_global_ca_store == true) {
if (global_cacert == NULL) {
ESP_LOGE(TAG, "global_cacert is NULL");
goto exit;
}
tls->cacert_ptr = global_cacert;
mbedtls_ssl_conf_authmode(&tls->conf, MBEDTLS_SSL_VERIFY_REQUIRED);
mbedtls_ssl_conf_ca_chain(&tls->conf, tls->cacert_ptr, NULL);
} else if (cfg->cacert_pem_buf != NULL) {
tls->cacert_ptr = &tls->cacert;
mbedtls_x509_crt_init(tls->cacert_ptr);
ret = mbedtls_x509_crt_parse(tls->cacert_ptr, cfg->cacert_pem_buf, cfg->cacert_pem_bytes);
if (ret < 0) {
ESP_LOGE(TAG, "mbedtls_x509_crt_parse returned -0x%x\n\n", -ret);
goto exit;
}
mbedtls_ssl_conf_authmode(&tls->conf, MBEDTLS_SSL_VERIFY_REQUIRED);
mbedtls_ssl_conf_ca_chain(&tls->conf, tls->cacert_ptr, NULL);
} else {
mbedtls_ssl_conf_authmode(&tls->conf, MBEDTLS_SSL_VERIFY_NONE);
}
if (cfg->clientcert_pem_buf != NULL && cfg->clientkey_pem_buf != NULL) {
mbedtls_x509_crt_init(&tls->clientcert);
mbedtls_pk_init(&tls->clientkey);
ret = mbedtls_x509_crt_parse(&tls->clientcert, cfg->clientcert_pem_buf, cfg->clientcert_pem_bytes);
if (ret < 0) {
ESP_LOGE(TAG, "mbedtls_x509_crt_parse returned -0x%x\n\n", -ret);
goto exit;
}
ret = mbedtls_pk_parse_key(&tls->clientkey, cfg->clientkey_pem_buf, cfg->clientkey_pem_bytes,
cfg->clientkey_password, cfg->clientkey_password_len);
if (ret < 0) {
ESP_LOGE(TAG, "mbedtls_pk_parse_keyfile returned -0x%x\n\n", -ret);
goto exit;
}
ret = mbedtls_ssl_conf_own_cert(&tls->conf, &tls->clientcert, &tls->clientkey);
if (ret < 0) {
ESP_LOGE(TAG, "mbedtls_ssl_conf_own_cert returned -0x%x\n\n", -ret);
goto exit;
}
} else if (cfg->clientcert_pem_buf != NULL || cfg->clientkey_pem_buf != NULL) {
ESP_LOGE(TAG, "You have to provide both clientcert_pem_buf and clientkey_pem_buf for mutual authentication\n\n");
goto exit;
}
mbedtls_ssl_conf_rng(&tls->conf, mbedtls_ctr_drbg_random, &tls->ctr_drbg);
#ifdef CONFIG_MBEDTLS_DEBUG
mbedtls_esp_enable_debug_log(&tls->conf, 4);
#endif
if ((ret = mbedtls_ssl_setup(&tls->ssl, &tls->conf)) != 0) {
ESP_LOGE(TAG, "mbedtls_ssl_setup returned -0x%x\n\n", -ret);
goto exit;
}
mbedtls_ssl_set_bio(&tls->ssl, &tls->server_fd, mbedtls_net_send, mbedtls_net_recv, NULL);
return 0;
exit:
mbedtls_cleanup(tls);
return -1;
}
STATIC mp_obj_ssl_socket_t *socket_new(mp_obj_t sock, struct ssl_args *args) {
// Verify the socket object has the full stream protocol
mp_get_stream_raise(sock, MP_STREAM_OP_READ | MP_STREAM_OP_WRITE | MP_STREAM_OP_IOCTL);
#if MICROPY_PY_USSL_FINALISER
mp_obj_ssl_socket_t *o = m_new_obj_with_finaliser(mp_obj_ssl_socket_t);
#else
mp_obj_ssl_socket_t *o = m_new_obj(mp_obj_ssl_socket_t);
#endif
o->base.type = &ussl_socket_type;
o->sock = sock;
int ret;
mbedtls_ssl_init(&o->ssl);
mbedtls_ssl_config_init(&o->conf);
mbedtls_x509_crt_init(&o->cacert);
mbedtls_x509_crt_init(&o->cert);
mbedtls_pk_init(&o->pkey);
mbedtls_ctr_drbg_init(&o->ctr_drbg);
#ifdef MBEDTLS_DEBUG_C
// Debug level (0-4)
mbedtls_debug_set_threshold(0);
#endif
mbedtls_entropy_init(&o->entropy);
const byte seed[] = "upy";
ret = mbedtls_ctr_drbg_seed(&o->ctr_drbg, mbedtls_entropy_func, &o->entropy, seed, sizeof(seed));
if (ret != 0) {
goto cleanup;
}
ret = mbedtls_ssl_config_defaults(&o->conf,
args->server_side.u_bool ? MBEDTLS_SSL_IS_SERVER : MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if (ret != 0) {
goto cleanup;
}
mbedtls_ssl_conf_authmode(&o->conf, MBEDTLS_SSL_VERIFY_NONE);
mbedtls_ssl_conf_rng(&o->conf, mbedtls_ctr_drbg_random, &o->ctr_drbg);
#ifdef MBEDTLS_DEBUG_C
mbedtls_ssl_conf_dbg(&o->conf, mbedtls_debug, NULL);
#endif
ret = mbedtls_ssl_setup(&o->ssl, &o->conf);
if (ret != 0) {
goto cleanup;
}
if (args->server_hostname.u_obj != mp_const_none) {
const char *sni = mp_obj_str_get_str(args->server_hostname.u_obj);
ret = mbedtls_ssl_set_hostname(&o->ssl, sni);
if (ret != 0) {
goto cleanup;
}
}
mbedtls_ssl_set_bio(&o->ssl, &o->sock, _mbedtls_ssl_send, _mbedtls_ssl_recv, NULL);
if (args->key.u_obj != MP_OBJ_NULL) {
size_t key_len;
const byte *key = (const byte*)mp_obj_str_get_data(args->key.u_obj, &key_len);
// len should include terminating null
ret = mbedtls_pk_parse_key(&o->pkey, key, key_len + 1, NULL, 0);
assert(ret == 0);
size_t cert_len;
const byte *cert = (const byte*)mp_obj_str_get_data(args->cert.u_obj, &cert_len);
// len should include terminating null
ret = mbedtls_x509_crt_parse(&o->cert, cert, cert_len + 1);
assert(ret == 0);
ret = mbedtls_ssl_conf_own_cert(&o->conf, &o->cert, &o->pkey);
assert(ret == 0);
}
if (args->do_handshake.u_bool) {
while ((ret = mbedtls_ssl_handshake(&o->ssl)) != 0) {
if (ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE) {
printf("mbedtls_ssl_handshake error: -%x\n", -ret);
goto cleanup;
}
}
}
return o;
cleanup:
mbedtls_pk_free(&o->pkey);
mbedtls_x509_crt_free(&o->cert);
mbedtls_x509_crt_free(&o->cacert);
mbedtls_ssl_free(&o->ssl);
mbedtls_ssl_config_free(&o->conf);
mbedtls_ctr_drbg_free(&o->ctr_drbg);
mbedtls_entropy_free(&o->entropy);
if (ret == MBEDTLS_ERR_SSL_ALLOC_FAILED) {
mp_raise_OSError(MP_ENOMEM);
} else {
mp_raise_OSError(MP_EIO);
}
}
static void https_get_task(void *pvParameters)
{
char buf[512];
int ret, flags, len;
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_x509_crt cacert;
mbedtls_ssl_config conf;
mbedtls_net_context server_fd;
mbedtls_ssl_init(&ssl);
mbedtls_x509_crt_init(&cacert);
mbedtls_ctr_drbg_init(&ctr_drbg);
ESP_LOGI(TAG, "Seeding the random number generator");
mbedtls_ssl_config_init(&conf);
mbedtls_entropy_init(&entropy);
if((ret = mbedtls_ctr_drbg_seed(&ctr_drbg, mbedtls_entropy_func, &entropy,
NULL, 0)) != 0)
{
ESP_LOGE(TAG, "mbedtls_ctr_drbg_seed returned %d", ret);
abort();
}
ESP_LOGI(TAG, "Loading the CA root certificate...");
ret = mbedtls_x509_crt_parse(&cacert, server_root_cert_pem_start,
server_root_cert_pem_end-server_root_cert_pem_start);
if(ret < 0)
{
ESP_LOGE(TAG, "mbedtls_x509_crt_parse returned -0x%x\n\n", -ret);
abort();
}
ESP_LOGI(TAG, "Setting hostname for TLS session...");
/* Hostname set here should match CN in server certificate */
if((ret = mbedtls_ssl_set_hostname(&ssl, WEB_SERVER)) != 0)
{
ESP_LOGE(TAG, "mbedtls_ssl_set_hostname returned -0x%x", -ret);
abort();
}
ESP_LOGI(TAG, "Setting up the SSL/TLS structure...");
if((ret = mbedtls_ssl_config_defaults(&conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT)) != 0)
{
ESP_LOGE(TAG, "mbedtls_ssl_config_defaults returned %d", ret);
goto exit;
}
/* MBEDTLS_SSL_VERIFY_OPTIONAL is bad for security, in this example it will print
a warning if CA verification fails but it will continue to connect.
You should consider using MBEDTLS_SSL_VERIFY_REQUIRED in your own code.
*/
mbedtls_ssl_conf_authmode(&conf, MBEDTLS_SSL_VERIFY_OPTIONAL);
mbedtls_ssl_conf_ca_chain(&conf, &cacert, NULL);
mbedtls_ssl_conf_rng(&conf, mbedtls_ctr_drbg_random, &ctr_drbg);
#ifdef CONFIG_MBEDTLS_DEBUG
mbedtls_esp_enable_debug_log(&conf, 4);
#endif
if ((ret = mbedtls_ssl_setup(&ssl, &conf)) != 0)
{
ESP_LOGE(TAG, "mbedtls_ssl_setup returned -0x%x\n\n", -ret);
goto exit;
}
while(1) {
/* Wait for the callback to set the CONNECTED_BIT in the
event group.
*/
xEventGroupWaitBits(wifi_event_group, CONNECTED_BIT,
false, true, portMAX_DELAY);
ESP_LOGI(TAG, "Connected to AP");
mbedtls_net_init(&server_fd);
ESP_LOGI(TAG, "Connecting to %s:%s...", WEB_SERVER, WEB_PORT);
if ((ret = mbedtls_net_connect(&server_fd, WEB_SERVER,
WEB_PORT, MBEDTLS_NET_PROTO_TCP)) != 0)
{
ESP_LOGE(TAG, "mbedtls_net_connect returned -%x", -ret);
goto exit;
}
ESP_LOGI(TAG, "Connected.");
mbedtls_ssl_set_bio(&ssl, &server_fd, mbedtls_net_send, mbedtls_net_recv, NULL);
ESP_LOGI(TAG, "Performing the SSL/TLS handshake...");
while ((ret = mbedtls_ssl_handshake(&ssl)) != 0)
{
if (ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE)
{
ESP_LOGE(TAG, "mbedtls_ssl_handshake returned -0x%x", -ret);
goto exit;
}
}
ESP_LOGI(TAG, "Verifying peer X.509 certificate...");
if ((flags = mbedtls_ssl_get_verify_result(&ssl)) != 0)
{
/* In real life, we probably want to close connection if ret != 0 */
ESP_LOGW(TAG, "Failed to verify peer certificate!");
bzero(buf, sizeof(buf));
mbedtls_x509_crt_verify_info(buf, sizeof(buf), " ! ", flags);
ESP_LOGW(TAG, "verification info: %s", buf);
}
else {
ESP_LOGI(TAG, "Certificate verified.");
}
ESP_LOGI(TAG, "Cipher suite is %s", mbedtls_ssl_get_ciphersuite(&ssl));
ESP_LOGI(TAG, "Writing HTTP request...");
size_t written_bytes = 0;
do {
ret = mbedtls_ssl_write(&ssl,
(const unsigned char *)REQUEST + written_bytes,
strlen(REQUEST) - written_bytes);
if (ret >= 0) {
ESP_LOGI(TAG, "%d bytes written", ret);
written_bytes += ret;
} else if (ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_WANT_READ) {
ESP_LOGE(TAG, "mbedtls_ssl_write returned -0x%x", -ret);
goto exit;
}
} while(written_bytes < strlen(REQUEST));
ESP_LOGI(TAG, "Reading HTTP response...");
do
{
len = sizeof(buf) - 1;
bzero(buf, sizeof(buf));
ret = mbedtls_ssl_read(&ssl, (unsigned char *)buf, len);
if(ret == MBEDTLS_ERR_SSL_WANT_READ || ret == MBEDTLS_ERR_SSL_WANT_WRITE)
continue;
if(ret == MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY) {
ret = 0;
break;
}
if(ret < 0)
{
ESP_LOGE(TAG, "mbedtls_ssl_read returned -0x%x", -ret);
break;
}
if(ret == 0)
{
ESP_LOGI(TAG, "connection closed");
break;
}
len = ret;
ESP_LOGD(TAG, "%d bytes read", len);
/* Print response directly to stdout as it is read */
for(int i = 0; i < len; i++) {
putchar(buf[i]);
}
} while(1);
mbedtls_ssl_close_notify(&ssl);
exit:
mbedtls_ssl_session_reset(&ssl);
mbedtls_net_free(&server_fd);
if(ret != 0)
{
mbedtls_strerror(ret, buf, 100);
ESP_LOGE(TAG, "Last error was: -0x%x - %s", -ret, buf);
}
putchar('\n'); // JSON output doesn't have a newline at end
static int request_count;
ESP_LOGI(TAG, "Completed %d requests", ++request_count);
for(int countdown = 10; countdown >= 0; countdown--) {
ESP_LOGI(TAG, "%d...", countdown);
vTaskDelay(1000 / portTICK_PERIOD_MS);
}
ESP_LOGI(TAG, "Starting again!");
}
}
int main( void )
{
int ret;
mbedtls_net_context listen_fd, client_fd;
const char pers[] = "ssl_pthread_server";
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_config conf;
mbedtls_x509_crt srvcert;
mbedtls_x509_crt cachain;
mbedtls_pk_context pkey;
#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
unsigned char alloc_buf[100000];
#endif
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_context cache;
#endif
#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
mbedtls_memory_buffer_alloc_init( alloc_buf, sizeof(alloc_buf) );
#endif
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_init( &cache );
#endif
mbedtls_x509_crt_init( &srvcert );
mbedtls_x509_crt_init( &cachain );
mbedtls_ssl_config_init( &conf );
mbedtls_ctr_drbg_init( &ctr_drbg );
memset( threads, 0, sizeof(threads) );
mbedtls_net_init( &listen_fd );
mbedtls_net_init( &client_fd );
mbedtls_mutex_init( &debug_mutex );
base_info.config = &conf;
/*
* We use only a single entropy source that is used in all the threads.
*/
mbedtls_entropy_init( &entropy );
/*
* 1. Load the certificates and private RSA key
*/
mbedtls_printf( "\n . Loading the server cert. and key..." );
fflush( stdout );
/*
* This demonstration program uses embedded test certificates.
* Instead, you may want to use mbedtls_x509_crt_parse_file() to read the
* server and CA certificates, as well as mbedtls_pk_parse_keyfile().
*/
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt,
mbedtls_test_srv_crt_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_x509_crt_parse( &cachain, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
mbedtls_pk_init( &pkey );
ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key,
mbedtls_test_srv_key_len, NULL, 0 );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1b. Seed the random number generator
*/
mbedtls_printf( " . Seeding the random number generator..." );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed: mbedtls_ctr_drbg_seed returned -0x%04x\n",
-ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1c. Prepare SSL configuration
*/
mbedtls_printf( " . Setting up the SSL data...." );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed: mbedtls_ssl_config_defaults returned -0x%04x\n",
-ret );
goto exit;
}
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_mutexed_debug, stdout );
/* mbedtls_ssl_cache_get() and mbedtls_ssl_cache_set() are thread-safe if
* MBEDTLS_THREADING_C is set.
*/
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_conf_session_cache( &conf, &cache,
mbedtls_ssl_cache_get,
mbedtls_ssl_cache_set );
#endif
mbedtls_ssl_conf_ca_chain( &conf, &cachain, NULL );
if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &srvcert, &pkey ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 2. Setup the listening TCP socket
*/
mbedtls_printf( " . Bind on https://localhost:4433/ ..." );
fflush( stdout );
if( ( ret = mbedtls_net_bind( &listen_fd, NULL, "4433", MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_bind returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
reset:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
mbedtls_printf( " [ main ] Last error was: -0x%04x - %s\n", -ret, error_buf );
}
#endif
/*
* 3. Wait until a client connects
*/
mbedtls_printf( " [ main ] Waiting for a remote connection\n" );
if( ( ret = mbedtls_net_accept( &listen_fd, &client_fd,
NULL, 0, NULL ) ) != 0 )
{
mbedtls_printf( " [ main ] failed: mbedtls_net_accept returned -0x%04x\n", ret );
goto exit;
}
mbedtls_printf( " [ main ] ok\n" );
mbedtls_printf( " [ main ] Creating a new thread\n" );
if( ( ret = thread_create( &client_fd ) ) != 0 )
{
mbedtls_printf( " [ main ] failed: thread_create returned %d\n", ret );
mbedtls_net_free( &client_fd );
goto reset;
}
ret = 0;
goto reset;
exit:
mbedtls_x509_crt_free( &srvcert );
mbedtls_pk_free( &pkey );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_free( &cache );
#endif
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
mbedtls_ssl_config_free( &conf );
mbedtls_net_free( &listen_fd );
mbedtls_mutex_free( &debug_mutex );
#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
mbedtls_memory_buffer_alloc_free();
#endif
#if defined(_WIN32)
mbedtls_printf( " Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
return( ret );
}
int main( void )
{
int ret, len, cnt = 0, pid;
mbedtls_net_context listen_fd, client_fd;
unsigned char buf[1024];
const char *pers = "ssl_fork_server";
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt srvcert;
mbedtls_pk_context pkey;
mbedtls_net_init( &listen_fd );
mbedtls_net_init( &client_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
mbedtls_entropy_init( &entropy );
mbedtls_pk_init( &pkey );
mbedtls_x509_crt_init( &srvcert );
mbedtls_ctr_drbg_init( &ctr_drbg );
signal( SIGCHLD, SIG_IGN );
/*
* 0. Initial seeding of the RNG
*/
mbedtls_printf( "\n . Initial seeding of the random generator..." );
fflush( stdout );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1. Load the certificates and private RSA key
*/
mbedtls_printf( " . Loading the server cert. and key..." );
fflush( stdout );
/*
* This demonstration program uses embedded test certificates.
* Instead, you may want to use mbedtls_x509_crt_parse_file() to read the
* server and CA certificates, as well as mbedtls_pk_parse_keyfile().
*/
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt,
mbedtls_test_srv_crt_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key,
mbedtls_test_srv_key_len, NULL, 0 );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1b. Prepare SSL configuration
*/
mbedtls_printf( " . Configuring SSL..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
mbedtls_ssl_conf_ca_chain( &conf, srvcert.next, NULL );
if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &srvcert, &pkey ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 2. Setup the listening TCP socket
*/
mbedtls_printf( " . Bind on https://localhost:4433/ ..." );
fflush( stdout );
if( ( ret = mbedtls_net_bind( &listen_fd, NULL, "4433", MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_bind returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
while( 1 )
{
/*
* 3. Wait until a client connects
*/
mbedtls_net_init( &client_fd );
mbedtls_ssl_init( &ssl );
mbedtls_printf( " . Waiting for a remote connection ..." );
fflush( stdout );
if( ( ret = mbedtls_net_accept( &listen_fd, &client_fd,
NULL, 0, NULL ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_accept returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 3.5. Forking server thread
*/
pid = fork();
mbedtls_printf( " . Forking to handle connection ..." );
fflush( stdout );
if( pid < 0 )
{
mbedtls_printf(" failed\n ! fork returned %d\n\n", pid );
goto exit;
}
mbedtls_printf( " ok\n" );
if( pid != 0 )
{
if( ( ret = mbedtls_ctr_drbg_reseed( &ctr_drbg,
(const unsigned char *) "parent",
6 ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_reseed returned %d\n", ret );
goto exit;
}
mbedtls_net_free( &client_fd );
continue;
}
mbedtls_net_free( &listen_fd );
/*
* 4. Setup stuff
*/
mbedtls_printf( " . Setting up the SSL data...." );
fflush( stdout );
if( ( ret = mbedtls_ctr_drbg_reseed( &ctr_drbg,
(const unsigned char *) "child",
5 ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_reseed returned %d\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &client_fd, mbedtls_net_send, mbedtls_net_recv, NULL );
mbedtls_printf( " ok\n" );
/*
* 5. Handshake
*/
mbedtls_printf( " . Performing the SSL/TLS handshake..." );
fflush( stdout );
while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned %d\n\n", ret );
goto exit;
}
}
mbedtls_printf( " ok\n" );
/*
* 6. Read the HTTP Request
*/
mbedtls_printf( " < Read from client:" );
fflush( stdout );
do
{
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
ret = mbedtls_ssl_read( &ssl, buf, len );
if( ret == MBEDTLS_ERR_SSL_WANT_READ || ret == MBEDTLS_ERR_SSL_WANT_WRITE )
continue;
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
break;
case MBEDTLS_ERR_NET_CONN_RESET:
mbedtls_printf( " connection was reset by peer\n" );
break;
default:
mbedtls_printf( " mbedtls_ssl_read returned %d\n", ret );
break;
}
break;
}
len = ret;
mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf );
if( ret > 0 )
break;
}
while( 1 );
/*
* 7. Write the 200 Response
*/
mbedtls_printf( " > Write to client:" );
fflush( stdout );
len = sprintf( (char *) buf, HTTP_RESPONSE,
mbedtls_ssl_get_ciphersuite( &ssl ) );
while( cnt++ < 100 )
{
while( ( ret = mbedtls_ssl_write( &ssl, buf, len ) ) <= 0 )
{
if( ret == MBEDTLS_ERR_NET_CONN_RESET )
{
mbedtls_printf( " failed\n ! peer closed the connection\n\n" );
goto exit;
}
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret );
goto exit;
}
}
len = ret;
mbedtls_printf( " %d bytes written\n\n%s\n", len, (char *) buf );
mbedtls_net_usleep( 1000000 );
}
mbedtls_ssl_close_notify( &ssl );
goto exit;
}
exit:
mbedtls_net_free( &client_fd );
mbedtls_net_free( &listen_fd );
mbedtls_x509_crt_free( &srvcert );
mbedtls_pk_free( &pkey );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
mbedtls_printf( " Press Enter to exit this program.\n" );
fflush( stdout );
getchar();
#endif
return( ret );
}
int main( int argc, const char *argv[] )
{
/* Client and server declarations. */
int ret;
int len;
#if SOCKET_COMMUNICATION
mbedtls_net_context listen_fd, client_fd, server_fd;
#endif
unsigned char buf[1024];
/* Handshake step counter */
size_t step = 1;
int flags;
mbedtls_ssl_context s_ssl, c_ssl;
mbedtls_ssl_config s_conf, c_conf;
mbedtls_x509_crt srvcert;
mbedtls_pk_context pkey;
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_context cache;
#endif
if( argc == 3)
{
packet_in_num = atoi(argv[1]);
packet_in_file = argv[2];
}
else if( argc != 1)
{
usage(argv[0]);
exit(1);
}
/* Server init */
#if SOCKET_COMMUNICATION
mbedtls_net_init( &listen_fd );
mbedtls_net_init( &client_fd );
#endif
mbedtls_ssl_init( &s_ssl );
mbedtls_ssl_config_init( &s_conf );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_init( &cache );
#endif
mbedtls_x509_crt_init( &srvcert );
mbedtls_pk_init( &pkey );
/* Client init */
#if SOCKET_COMMUNICATION
mbedtls_net_init( &server_fd );
#endif
mbedtls_ssl_init( &c_ssl );
mbedtls_ssl_config_init( &c_conf );
/*mbedtls_x509_crt_init( &cacert );*/
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold( DEBUG_LEVEL );
#endif
/*
* Server:
* Load the certificates and private RSA key
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Loading the server cert. and key..." );
fflush( stdout );
}
/*
* This demonstration program uses embedded test certificates.
* Instead, you may want to use mbedtls_x509_crt_parse_file() to read the
* server and CA certificates, as well as mbedtls_pk_parse_keyfile().
*/
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt,
mbedtls_test_srv_crt_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key,
mbedtls_test_srv_key_len, NULL, 0 );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret );
goto exit;
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
/*
* Server:
* Setup stuff
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Server: Setting up the SSL data...." );
fflush( stdout );
}
if( ( ret = mbedtls_ssl_config_defaults( &s_conf,
MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_conf_rng( &s_conf, mbedtls_ctr_drbg_deterministic, NULL );
mbedtls_ssl_conf_dbg( &s_conf, my_debug, stdout );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_conf_session_cache( &s_conf, &cache,
mbedtls_ssl_cache_get,
mbedtls_ssl_cache_set );
#endif
mbedtls_ssl_conf_ca_chain( &s_conf, srvcert.next, NULL );
if( ( ret = mbedtls_ssl_conf_own_cert( &s_conf, &srvcert, &pkey ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_setup( &s_ssl, &s_conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
mbedtls_ssl_session_reset( &s_ssl );
#if SOCKET_COMMUNICATION
/*
* Server:
* Setup the listening TCP socket
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Bind on https://localhost:%s/ ...", SERVER_PORT );
fflush( stdout );
}
if( ( ret = mbedtls_net_bind( &listen_fd, NULL, SERVER_PORT, MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_bind returned %d\n\n", ret );
goto exit;
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
/*
* Client:
* Start the connection
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Connecting to tcp/%s/%s...", SERVER_NAME, SERVER_PORT );
fflush( stdout );
}
if( ( ret = mbedtls_net_connect( &server_fd, SERVER_NAME,
SERVER_PORT, MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned %d\n\n", ret );
goto exit;
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
/*
* Server:
* Start listening for client connections
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Waiting for a remote connection ..." );
fflush( stdout );
}
/*
* Server:
* Accept client connection (socket is set non-blocking in
* library/net.c)
*/
if( ( ret = mbedtls_net_accept( &listen_fd, &client_fd,
NULL, 0, NULL ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_accept returned %d\n\n", ret );
goto exit;
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
mbedtls_ssl_set_bio( &s_ssl, &client_fd, mbedtls_send_custom, mbedtls_recv_custom, NULL );
#else
mbedtls_ssl_set_bio( &s_ssl, NULL, mbedtls_server_send_buf, mbedtls_server_recv_buf, NULL );
#endif
/*
* Client:
* Setup stuff
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Client: Setting up the SSL/TLS structure..." );
fflush( stdout );
}
if( ( ret = mbedtls_ssl_config_defaults( &c_conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
/* OPTIONAL is not optimal for security,
* but makes interop easier in this simplified example */
mbedtls_ssl_conf_authmode( &c_conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
/* NONE permits man-in-the-middle attacks. */
/*mbedtls_ssl_conf_authmode( &c_conf, MBEDTLS_SSL_VERIFY_NONE );*/
/*mbedtls_ssl_conf_authmode( &c_conf, MBEDTLS_SSL_VERIFY_REQUIRED );*/
mbedtls_ssl_conf_ca_chain( &c_conf, &srvcert, NULL );
mbedtls_ssl_conf_rng( &c_conf, mbedtls_ctr_drbg_deterministic, NULL );
mbedtls_ssl_conf_dbg( &c_conf, my_debug, stdout );
if( ( ret = mbedtls_ssl_setup( &c_ssl, &c_conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_set_hostname( &c_ssl, "mbed TLS Server 1" ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret );
goto exit;
}
#if SOCKET_COMMUNICATION
mbedtls_ssl_set_bio( &c_ssl, &server_fd, mbedtls_send_custom, mbedtls_recv_custom, NULL );
#else
mbedtls_ssl_set_bio( &c_ssl, NULL, mbedtls_client_send_buf, mbedtls_client_recv_buf, NULL );
#endif
if( packet_in_num == 0 )
{
mbedtls_printf( " . Performing the SSL/TLS handshake...\n" );
fflush( stdout );
}
/*
* The following number of steps are hardcoded to ensure
* that the client and server complete the handshake without
* waiting infinitely for the other side to send data.
*
* 1 2 3 4 5 6 7 8 9 10
*/
int client_steps[] = { 2, 1, 1, 1, 4, 2, 1, 1, 2, 1 };
int server_steps[] = { 3, 1, 1, 2, 3, 1, 2, 1, 1, 1 };
do {
/*
* Client:
* Handshake step
*/
int i;
int no_steps;
if( c_ssl.state == MBEDTLS_SSL_HANDSHAKE_OVER) {
no_steps = 0;
} else {
no_steps = client_steps[step - 1];
}
for (i = 0; i < no_steps; i++) {
if( ( ret = mbedtls_ssl_handshake_step( &c_ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", -ret );
goto exit;
}
}
}
if( packet_in_num == 0 )
{
mbedtls_printf( "--- client handshake step %zd ok\n", step );
}
/*
* Server:
* Handshake step
*/
if( s_ssl.state == MBEDTLS_SSL_HANDSHAKE_OVER) {
no_steps = 0;
} else {
no_steps = server_steps[step - 1];
}
for (i = 0; i < no_steps; i++) {
if( ( ret = mbedtls_ssl_handshake_step( &s_ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned %d\n\n", ret );
goto exit;
}
}
}
if( packet_in_num == 0 )
{
mbedtls_printf( "--- server handshake step %zd ok\n", step );
}
step++;
} while( ((c_ssl.state != MBEDTLS_SSL_HANDSHAKE_OVER)
|| (s_ssl.state != MBEDTLS_SSL_HANDSHAKE_OVER))
&& (step <= MAX_HANDSHAKE_STEPS) );
if( packet_in_num == 0 )
{
mbedtls_printf( "c_ssl.state: %d\n", c_ssl.state != MBEDTLS_SSL_HANDSHAKE_OVER );
mbedtls_printf( "s_ssl.state: %d\n", s_ssl.state != MBEDTLS_SSL_HANDSHAKE_OVER );
}
/*
* Client:
* Verify the server certificate
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Verifying peer X.509 certificate..." );
}
/* In real life, we probably want to bail out when ret != 0 */
if( ( flags = mbedtls_ssl_get_verify_result( &c_ssl ) ) != 0 )
{
char vrfy_buf[512];
mbedtls_printf( " failed\n" );
mbedtls_x509_crt_verify_info( vrfy_buf, sizeof( vrfy_buf ), " ! ", flags );
mbedtls_printf( "%s\n", vrfy_buf );
}
else if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
/*
* Client:
* Write the GET request
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " > Write to server:" );
fflush( stdout );
}
len = sprintf( (char *) buf, GET_REQUEST );
while( ( ret = mbedtls_ssl_write( &c_ssl, buf, len ) ) <= 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret );
goto exit;
}
}
len = ret;
if( packet_in_num == 0 )
{
mbedtls_printf( " %d bytes written\n\n%s", len, (char *) buf );
}
/*
* Server:
* Read the HTTP Request
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " < Read from client:" );
fflush( stdout );
}
do
{
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
ret = mbedtls_ssl_read( &s_ssl, buf, len );
if( ret == MBEDTLS_ERR_SSL_WANT_READ || ret == MBEDTLS_ERR_SSL_WANT_WRITE )
continue;
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
break;
case MBEDTLS_ERR_NET_CONN_RESET:
mbedtls_printf( " connection was reset by peer\n" );
break;
default:
mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n", -ret );
break;
}
break;
}
len = ret;
if( packet_in_num == 0 )
{
mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf );
}
if( ret > 0 )
break;
}
while( 1 );
/*
* Server:
* Write the 200 Response
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " > Write to client:" );
fflush( stdout );
}
len = sprintf( (char *) buf, HTTP_RESPONSE,
mbedtls_ssl_get_ciphersuite( &s_ssl ) );
while( ( ret = mbedtls_ssl_write( &s_ssl, buf, len ) ) <= 0 )
{
if( ret == MBEDTLS_ERR_NET_CONN_RESET )
{
mbedtls_printf( " failed\n ! peer closed the connection\n\n" );
goto exit;
}
if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret );
goto exit;
}
}
len = ret;
if( packet_in_num == 0 )
{
mbedtls_printf( " %d bytes written\n\n%s\n", len, (char *) buf );
}
/*
* Client:
* Read the HTTP response
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " < Read from server:" );
fflush( stdout );
}
do
{
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
ret = mbedtls_ssl_read( &c_ssl, buf, len );
if( ret == MBEDTLS_ERR_SSL_WANT_READ || ret == MBEDTLS_ERR_SSL_WANT_WRITE )
continue;
if( ret == MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY )
{
ret = 0;
break;
}
if( ret < 0 )
{
mbedtls_printf( "failed\n ! mbedtls_ssl_read returned %d\n\n", ret );
break;
}
if( ret == 0 )
{
mbedtls_printf( "\n\nEOF\n\n" );
break;
}
len = ret;
if( packet_in_num == 0 )
{
mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf );
}
/*
* Server:
* Client read response. Close connection.
*/
if ( packet_in_num == 0 )
{
mbedtls_printf( " . Closing the connection..." );
fflush( stdout );
}
while( ( ret = mbedtls_ssl_close_notify( &s_ssl ) ) < 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_close_notify returned %d\n\n", ret );
goto exit;
}
}
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
}
while( 1 );
/*
* Client:
* Close connection.
*/
if( packet_in_num == 0 )
{
mbedtls_printf( " . Closing the connection..." );
fflush( stdout );
}
mbedtls_ssl_close_notify( &c_ssl );
if( packet_in_num == 0 )
{
mbedtls_printf( " ok\n" );
}
/*
* Server:
* We do not have multiple clients and therefore do not goto reset.
*/
/*ret = 0;*/
/*goto reset;*/
exit:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
mbedtls_printf("Last error was: %d - %s\n\n", ret, error_buf );
}
#endif
#if SOCKET_COMMUNICATION
mbedtls_net_free( &client_fd );
mbedtls_net_free( &listen_fd );
mbedtls_net_free( &server_fd );
#endif
mbedtls_x509_crt_free( &srvcert );
mbedtls_pk_free( &pkey );
mbedtls_ssl_free( &s_ssl );
mbedtls_ssl_free( &c_ssl );
mbedtls_ssl_config_free( &s_conf );
mbedtls_ssl_config_free( &c_conf );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_free( &cache );
#endif
#if defined(_WIN32)
mbedtls_printf( " Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
return( ret );
}
int main( void )
{
int ret, len;
mbedtls_net_context listen_fd, client_fd;
unsigned char buf[1024];
const char *pers = "dtls_server";
unsigned char client_ip[16] = { 0 };
size_t cliip_len;
mbedtls_ssl_cookie_ctx cookie_ctx;
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt srvcert;
mbedtls_pk_context pkey;
mbedtls_timing_delay_context timer;
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_context cache;
#endif
mbedtls_net_init( &listen_fd );
mbedtls_net_init( &client_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
mbedtls_ssl_cookie_init( &cookie_ctx );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_init( &cache );
#endif
mbedtls_x509_crt_init( &srvcert );
mbedtls_pk_init( &pkey );
mbedtls_entropy_init( &entropy );
mbedtls_ctr_drbg_init( &ctr_drbg );
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold( DEBUG_LEVEL );
#endif
/*
* 1. Load the certificates and private RSA key
*/
printf( "\n . Loading the server cert. and key..." );
fflush( stdout );
/*
* This demonstration program uses embedded test certificates.
* Instead, you may want to use mbedtls_x509_crt_parse_file() to read the
* server and CA certificates, as well as mbedtls_pk_parse_keyfile().
*/
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt,
mbedtls_test_srv_crt_len );
if( ret != 0 )
{
printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
if( ret != 0 )
{
printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key,
mbedtls_test_srv_key_len, NULL, 0 );
if( ret != 0 )
{
printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret );
goto exit;
}
printf( " ok\n" );
/*
* 2. Setup the "listening" UDP socket
*/
printf( " . Bind on udp/*/4433 ..." );
fflush( stdout );
if( ( ret = mbedtls_net_bind( &listen_fd, NULL, "4433", MBEDTLS_NET_PROTO_UDP ) ) != 0 )
{
printf( " failed\n ! mbedtls_net_bind returned %d\n\n", ret );
goto exit;
}
printf( " ok\n" );
/*
* 3. Seed the RNG
*/
printf( " . Seeding the random number generator..." );
fflush( stdout );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
goto exit;
}
printf( " ok\n" );
/*
* 4. Setup stuff
*/
printf( " . Setting up the DTLS data..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_DATAGRAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_conf_session_cache( &conf, &cache,
mbedtls_ssl_cache_get,
mbedtls_ssl_cache_set );
#endif
mbedtls_ssl_conf_ca_chain( &conf, srvcert.next, NULL );
if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &srvcert, &pkey ) ) != 0 )
{
printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_cookie_setup( &cookie_ctx,
mbedtls_ctr_drbg_random, &ctr_drbg ) ) != 0 )
{
printf( " failed\n ! mbedtls_ssl_cookie_setup returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_conf_dtls_cookies( &conf, mbedtls_ssl_cookie_write, mbedtls_ssl_cookie_check,
&cookie_ctx );
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay,
mbedtls_timing_get_delay );
printf( " ok\n" );
reset:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
printf("Last error was: %d - %s\n\n", ret, error_buf );
}
#endif
mbedtls_net_free( &client_fd );
mbedtls_ssl_session_reset( &ssl );
/*
* 3. Wait until a client connects
*/
printf( " . Waiting for a remote connection ..." );
fflush( stdout );
if( ( ret = mbedtls_net_accept( &listen_fd, &client_fd,
client_ip, sizeof( client_ip ), &cliip_len ) ) != 0 )
{
printf( " failed\n ! mbedtls_net_accept returned %d\n\n", ret );
goto exit;
}
/* For HelloVerifyRequest cookies */
if( ( ret = mbedtls_ssl_set_client_transport_id( &ssl,
client_ip, cliip_len ) ) != 0 )
{
printf( " failed\n ! "
"mbedtls_ssl_set_client_transport_id() returned -0x%x\n\n", -ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &client_fd,
mbedtls_net_send, mbedtls_net_recv, mbedtls_net_recv_timeout );
printf( " ok\n" );
/*
* 5. Handshake
*/
printf( " . Performing the DTLS handshake..." );
fflush( stdout );
do ret = mbedtls_ssl_handshake( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret == MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED )
{
printf( " hello verification requested\n" );
ret = 0;
goto reset;
}
else if( ret != 0 )
{
printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", -ret );
goto reset;
}
printf( " ok\n" );
/*
* 6. Read the echo Request
*/
printf( " < Read from client:" );
fflush( stdout );
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
do ret = mbedtls_ssl_read( &ssl, buf, len );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_TIMEOUT:
printf( " timeout\n\n" );
goto reset;
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
printf( " connection was closed gracefully\n" );
ret = 0;
goto close_notify;
default:
printf( " mbedtls_ssl_read returned -0x%x\n\n", -ret );
goto reset;
}
}
len = ret;
printf( " %d bytes read\n\n%s\n\n", len, buf );
/*
* 7. Write the 200 Response
*/
printf( " > Write to client:" );
fflush( stdout );
do ret = mbedtls_ssl_write( &ssl, buf, len );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret < 0 )
{
printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret );
goto exit;
}
len = ret;
printf( " %d bytes written\n\n%s\n\n", len, buf );
/*
* 8. Done, cleanly close the connection
*/
close_notify:
printf( " . Closing the connection..." );
/* No error checking, the connection might be closed already */
do ret = mbedtls_ssl_close_notify( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
ret = 0;
printf( " done\n" );
goto reset;
/*
* Final clean-ups and exit
*/
exit:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
printf( "Last error was: %d - %s\n\n", ret, error_buf );
}
#endif
mbedtls_net_free( &client_fd );
mbedtls_net_free( &listen_fd );
mbedtls_x509_crt_free( &srvcert );
mbedtls_pk_free( &pkey );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ssl_cookie_free( &cookie_ctx );
#if defined(MBEDTLS_SSL_CACHE_C)
mbedtls_ssl_cache_free( &cache );
#endif
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
printf( " Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
/* Shell can not handle large exit numbers -> 1 for errors */
if( ret < 0 )
ret = 1;
return( ret );
}
int main( int argc, char *argv[] )
{
int ret = 0, len;
mbedtls_net_context server_fd;
unsigned char buf[1024];
#if defined(MBEDTLS_BASE64_C)
unsigned char base[1024];
#endif
char hostname[32];
const char *pers = "ssl_mail_client";
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt cacert;
mbedtls_x509_crt clicert;
mbedtls_pk_context pkey;
int i;
size_t n;
char *p, *q;
const int *list;
/*
* Make sure memory references are valid in case we exit early.
*/
mbedtls_net_init( &server_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
memset( &buf, 0, sizeof( buf ) );
mbedtls_x509_crt_init( &cacert );
mbedtls_x509_crt_init( &clicert );
mbedtls_pk_init( &pkey );
mbedtls_ctr_drbg_init( &ctr_drbg );
if( argc == 0 )
{
usage:
mbedtls_printf( USAGE );
list = mbedtls_ssl_list_ciphersuites();
while( *list )
{
mbedtls_printf(" %s\n", mbedtls_ssl_get_ciphersuite_name( *list ) );
list++;
}
mbedtls_printf("\n");
goto exit;
}
opt.server_name = DFL_SERVER_NAME;
opt.server_port = DFL_SERVER_PORT;
opt.debug_level = DFL_DEBUG_LEVEL;
opt.authentication = DFL_AUTHENTICATION;
opt.mode = DFL_MODE;
opt.user_name = DFL_USER_NAME;
opt.user_pwd = DFL_USER_PWD;
opt.mail_from = DFL_MAIL_FROM;
opt.mail_to = DFL_MAIL_TO;
opt.ca_file = DFL_CA_FILE;
opt.crt_file = DFL_CRT_FILE;
opt.key_file = DFL_KEY_FILE;
opt.force_ciphersuite[0]= DFL_FORCE_CIPHER;
for( i = 1; i < argc; i++ )
{
p = argv[i];
if( ( q = strchr( p, '=' ) ) == NULL )
goto usage;
*q++ = '\0';
if( strcmp( p, "server_name" ) == 0 )
opt.server_name = q;
else if( strcmp( p, "server_port" ) == 0 )
opt.server_port = q;
else if( strcmp( p, "debug_level" ) == 0 )
{
opt.debug_level = atoi( q );
if( opt.debug_level < 0 || opt.debug_level > 65535 )
goto usage;
}
else if( strcmp( p, "authentication" ) == 0 )
{
opt.authentication = atoi( q );
if( opt.authentication < 0 || opt.authentication > 1 )
goto usage;
}
else if( strcmp( p, "mode" ) == 0 )
{
opt.mode = atoi( q );
if( opt.mode < 0 || opt.mode > 1 )
goto usage;
}
else if( strcmp( p, "user_name" ) == 0 )
opt.user_name = q;
else if( strcmp( p, "user_pwd" ) == 0 )
opt.user_pwd = q;
else if( strcmp( p, "mail_from" ) == 0 )
opt.mail_from = q;
else if( strcmp( p, "mail_to" ) == 0 )
opt.mail_to = q;
else if( strcmp( p, "ca_file" ) == 0 )
opt.ca_file = q;
else if( strcmp( p, "crt_file" ) == 0 )
opt.crt_file = q;
else if( strcmp( p, "key_file" ) == 0 )
opt.key_file = q;
else if( strcmp( p, "force_ciphersuite" ) == 0 )
{
opt.force_ciphersuite[0] = -1;
opt.force_ciphersuite[0] = mbedtls_ssl_get_ciphersuite_id( q );
if( opt.force_ciphersuite[0] <= 0 )
goto usage;
opt.force_ciphersuite[1] = 0;
}
else
goto usage;
}
/*
* 0. Initialize the RNG and the session data
*/
mbedtls_printf( "\n . Seeding the random number generator..." );
fflush( stdout );
mbedtls_entropy_init( &entropy );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1.1. Load the trusted CA
*/
mbedtls_printf( " . Loading the CA root certificate ..." );
fflush( stdout );
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.ca_file ) )
ret = mbedtls_x509_crt_parse_file( &cacert, opt.ca_file );
else
#endif
#if defined(MBEDTLS_CERTS_C)
ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
#else
{
ret = 1;
mbedtls_printf("MBEDTLS_CERTS_C not defined.");
}
#endif
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok (%d skipped)\n", ret );
/*
* 1.2. Load own certificate and private key
*
* (can be skipped if client authentication is not required)
*/
mbedtls_printf( " . Loading the client cert. and key..." );
fflush( stdout );
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.crt_file ) )
ret = mbedtls_x509_crt_parse_file( &clicert, opt.crt_file );
else
#endif
#if defined(MBEDTLS_CERTS_C)
ret = mbedtls_x509_crt_parse( &clicert, (const unsigned char *) mbedtls_test_cli_crt,
mbedtls_test_cli_crt_len );
#else
{
ret = -1;
mbedtls_printf("MBEDTLS_CERTS_C not defined.");
}
#endif
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.key_file ) )
ret = mbedtls_pk_parse_keyfile( &pkey, opt.key_file, "" );
else
#endif
#if defined(MBEDTLS_CERTS_C) && defined(MBEDTLS_PEM_PARSE_C)
ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_cli_key,
mbedtls_test_cli_key_len, NULL, 0 );
#else
{
ret = -1;
mbedtls_printf("MBEDTLS_CERTS_C or MBEDTLS_PEM_PARSE_C not defined.");
}
#endif
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 2. Start the connection
*/
mbedtls_printf( " . Connecting to tcp/%s/%s...", opt.server_name,
opt.server_port );
fflush( stdout );
if( ( ret = mbedtls_net_connect( &server_fd, opt.server_name,
opt.server_port, MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 3. Setup stuff
*/
mbedtls_printf( " . Setting up the SSL/TLS structure..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
/* OPTIONAL is not optimal for security,
* but makes interop easier in this simplified example */
mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
if( opt.force_ciphersuite[0] != DFL_FORCE_CIPHER )
mbedtls_ssl_conf_ciphersuites( &conf, opt.force_ciphersuite );
mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &clicert, &pkey ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_set_hostname( &ssl, opt.server_name ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &server_fd, mbedtls_net_send, mbedtls_net_recv, NULL );
mbedtls_printf( " ok\n" );
if( opt.mode == MODE_SSL_TLS )
{
if( do_handshake( &ssl ) != 0 )
goto exit;
mbedtls_printf( " > Get header from server:" );
fflush( stdout );
ret = write_ssl_and_get_response( &ssl, buf, 0 );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write EHLO to server:" );
fflush( stdout );
gethostname( hostname, 32 );
len = sprintf( (char *) buf, "EHLO %s\r\n", hostname );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
}
else
{
mbedtls_printf( " > Get header from server:" );
fflush( stdout );
ret = write_and_get_response( &server_fd, buf, 0 );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write EHLO to server:" );
fflush( stdout );
gethostname( hostname, 32 );
len = sprintf( (char *) buf, "EHLO %s\r\n", hostname );
ret = write_and_get_response( &server_fd, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write STARTTLS to server:" );
fflush( stdout );
gethostname( hostname, 32 );
len = sprintf( (char *) buf, "STARTTLS\r\n" );
ret = write_and_get_response( &server_fd, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
if( do_handshake( &ssl ) != 0 )
goto exit;
}
#if defined(MBEDTLS_BASE64_C)
if( opt.authentication )
{
mbedtls_printf( " > Write AUTH LOGIN to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "AUTH LOGIN\r\n" );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write username to server: %s", opt.user_name );
fflush( stdout );
ret = mbedtls_base64_encode( base, sizeof( base ), &n, (const unsigned char *) opt.user_name,
strlen( opt.user_name ) );
if( ret != 0 ) {
mbedtls_printf( " failed\n ! mbedtls_base64_encode returned %d\n\n", ret );
goto exit;
}
len = sprintf( (char *) buf, "%s\r\n", base );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 300 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write password to server: %s", opt.user_pwd );
fflush( stdout );
ret = mbedtls_base64_encode( base, sizeof( base ), &n, (const unsigned char *) opt.user_pwd,
strlen( opt.user_pwd ) );
if( ret != 0 ) {
mbedtls_printf( " failed\n ! mbedtls_base64_encode returned %d\n\n", ret );
goto exit;
}
len = sprintf( (char *) buf, "%s\r\n", base );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
}
#endif
mbedtls_printf( " > Write MAIL FROM to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "MAIL FROM:<%s>\r\n", opt.mail_from );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write RCPT TO to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "RCPT TO:<%s>\r\n", opt.mail_to );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write DATA to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "DATA\r\n" );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 300 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write content to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "From: %s\r\nSubject: mbed TLS Test mail\r\n\r\n"
"This is a simple test mail from the "
"mbed TLS mail client example.\r\n"
"\r\n"
"Enjoy!", opt.mail_from );
ret = write_ssl_data( &ssl, buf, len );
len = sprintf( (char *) buf, "\r\n.\r\n");
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_ssl_close_notify( &ssl );
exit:
mbedtls_net_free( &server_fd );
mbedtls_x509_crt_free( &clicert );
mbedtls_x509_crt_free( &cacert );
mbedtls_pk_free( &pkey );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
mbedtls_printf( " + Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
return( ret );
}
void clax_loop_ssl(clax_ctx_t *clax_ctx)
{
int ret = 0;
char pers[] = "clax_server";
#ifdef MVS
clax_etoa(pers, strlen(pers));
#endif
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt srvcert;
mbedtls_pk_context pkey;
mbedtls_ssl_cache_context cache;
mbedtls_ssl_init(&ssl);
mbedtls_ssl_config_init(&conf);
mbedtls_ssl_cache_init(&cache);
mbedtls_x509_crt_init(&srvcert);
mbedtls_pk_init(&pkey);
mbedtls_entropy_init(&entropy);
mbedtls_ctr_drbg_init(&ctr_drbg);
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold(DEBUG_LEVEL);
#endif
clax_log("Loading the server cert and key...");
unsigned char *file = NULL;
size_t file_len = 0;
clax_log("Loading '%s'...", options.cert_file);
file = clax_slurp_alloc(options.cert_file, &file_len);
if (file == NULL) {
clax_log("Can't load cert_file '%s': %s", options.cert_file, strerror(errno));
goto exit;
}
#ifdef MVS
clax_etoa((char *)file, file_len);
#endif
clax_log("Parsing '%s'...", options.cert_file);
ret = mbedtls_x509_crt_parse(&srvcert, (const unsigned char *)file, file_len);
free(file);
if (ret != 0) {
clax_log("failed\n ! mbedtls_x509_crt_parse returned %d", ret);
goto exit;
}
clax_log("Loading '%s'...", options.key_file);
file = clax_slurp_alloc(options.key_file, &file_len);
if (file == NULL) {
clax_log("Can't load key_file: %s", options.key_file);
goto exit;
}
#ifdef MVS
clax_etoa((char *)file, file_len);
#endif
clax_log("Parsing '%s'...", options.key_file);
ret = mbedtls_pk_parse_key(&pkey, (const unsigned char *)file, file_len, NULL, 0);
free(file);
if (ret != 0) {
clax_log("failed\n ! mbedtls_pk_parse_key returned %d", ret);
goto exit;
}
clax_log("ok");
if (options.entropy_file[0]) {
clax_log("Using '%s' as entropy file...", options.entropy_file);
if ((ret = mbedtls_entropy_add_source(&entropy, dev_random_entropy_poll,
NULL, DEV_RANDOM_THRESHOLD,
MBEDTLS_ENTROPY_SOURCE_STRONG)) != 0) {
clax_log("failed\n ! mbedtls_entropy_add_source returned -0x%04x", -ret);
goto exit;
}
clax_log("ok");
}
clax_log("Seeding the random number generator...");
if ((ret = mbedtls_ctr_drbg_seed(&ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *)pers,
strlen(pers))) != 0) {
clax_log("failed\n ! mbedtls_ctr_drbg_seed returned %d", ret);
goto exit;
}
clax_log("ok");
clax_log("Setting up the SSL data....");
if ((ret = mbedtls_ssl_config_defaults(&conf,
MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT)) != 0) {
clax_log("failed\n ! mbedtls_ssl_config_defaults returned %d", ret);
goto exit;
}
if (!options.no_ssl_verify) {
mbedtls_ssl_conf_authmode(&conf, MBEDTLS_SSL_VERIFY_REQUIRED);
}
mbedtls_ssl_conf_rng(&conf, mbedtls_ctr_drbg_random, &ctr_drbg);
mbedtls_ssl_conf_session_cache(&conf, &cache,
mbedtls_ssl_cache_get,
mbedtls_ssl_cache_set);
mbedtls_ssl_conf_ca_chain(&conf, srvcert.next, NULL);
if ((ret = mbedtls_ssl_conf_own_cert(&conf, &srvcert, &pkey)) != 0) {
clax_log(" failed\n ! mbedtls_ssl_conf_own_cert returned %d", ret);
goto exit;
}
if ((ret = mbedtls_ssl_setup(&ssl, &conf)) != 0) {
clax_log(" failed\n ! mbedtls_ssl_setup returned %d", ret);
goto exit;
}
clax_log("ok");
mbedtls_ssl_session_reset(&ssl);
mbedtls_ssl_set_bio(&ssl, NULL, clax_send, clax_recv, NULL);
clax_log("ok");
clax_log("Performing the SSL/TLS handshake...");
while ((ret = mbedtls_ssl_handshake(&ssl)) != 0) {
if (ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE) {
clax_log("failed\n ! mbedtls_ssl_handshake returned %d", ret);
goto exit;
}
}
clax_log("ok");
clax_http_dispatch(clax_ctx, clax_send_ssl, clax_recv_ssl, &ssl);
clax_log("Closing the connection...");
while ((ret = mbedtls_ssl_close_notify(&ssl)) < 0) {
if (ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE) {
clax_log("failed\n ! mbedtls_ssl_close_notify returned %d", ret);
goto exit;
}
}
clax_log("ok");
ret = 0;
goto exit;
exit:
fflush(stdout);
#ifdef MBEDTLS_ERROR_C
if (ret != 0) {
char error_buf[100];
mbedtls_strerror(ret, error_buf, 100);
#ifdef MVS
clax_atoe(error_buf, strlen(error_buf));
#endif
clax_log("Last error was: %d - %s", ret, error_buf);
}
#endif
mbedtls_x509_crt_free(&srvcert);
mbedtls_pk_free(&pkey);
mbedtls_ssl_free(&ssl);
mbedtls_ssl_config_free(&conf);
mbedtls_ssl_cache_free(&cache);
mbedtls_ctr_drbg_free(&ctr_drbg);
mbedtls_entropy_free(&entropy);
}
