void mdlInitializeSizes(SimStruct *S)
/* ======================================================================== */
{
/* parameters */
ssSetNumSFcnParams(S, NUM_PARAMS);
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) return;
} else
return;
#endif
ssSetSFcnParamTunable(S, FREQUENCY, SS_PRM_SIM_ONLY_TUNABLE);
ssSetSFcnParamTunable(S, BANDWIDTH, SS_PRM_NOT_TUNABLE);
ssSetSFcnParamTunable(S, TXVGA_GAIN, SS_PRM_SIM_ONLY_TUNABLE);
/* ports */
ssSetNumSampleTimes(S, 1);
if (!ssSetNumOutputPorts(S, 0) || !ssSetNumInputPorts(S, 1)) return;
ssSetInputPortWidth(S, 0, DYNAMICALLY_SIZED);
ssSetInputPortComplexSignal(S, 0, COMPLEX_YES);
ssSetInputPortDataType(S, 0, SS_INT8);
ssSetInputPortDirectFeedThrough(S, 0, true);
ssSetInputPortOptimOpts(S, 0, SS_REUSABLE_AND_LOCAL);
/* work Vectors */
ssSetNumPWork(S, P_WORK_LENGTH);
ssSetNumIWork(S, 0);
ssSetNumRWork(S, NUM_PARAMS);
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
ssSetOptions(S, 0);
}
/*=====================================*
* Configuration and execution methods *
*=====================================*/
static void mdlInitializeSizes(SimStruct *S)
{
#ifdef DEBUG
debug("mdlInitializeSizes entered.\n");
#endif
ssSetNumSFcnParams(S, NPAR); /* Number of expected parameters */
if (ssGetNumSFcnParams(S) != ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) return;
}
ssSetNumContStates(S, 0);
ssSetNumDiscStates(S, 0);
if (!ssSetNumInputPorts(S, 1)) return;
ssSetInputPortWidth(S, 0, NI);
ssSetInputPortDirectFeedThrough(S, 0, 1);
if (!ssSetNumOutputPorts(S, 1)) return;
ssSetOutputPortWidth(S, 0, NO);
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 0);
ssSetNumPWork(S, 0);
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
/* Take care when specifying exception free code - see sfuntmpl_doc.c */
ssSetOptions(S, SS_OPTION_EXCEPTION_FREE_CODE);
#ifdef DEBUG
debug("mdlInitializeSizes left.\n");
#endif
} /* mdlInitializeSizes */
static void mdlInitializeSizes( SimStruct *S )
/* ======================================================================== */
{
int_T port;
/* set number of expected parameters and check for a mismatch. */
ssSetNumSFcnParams( S, NUM_PARAMS );
#if defined(MATLAB_MEX_FILE)
if ( ssGetNumSFcnParams( S ) == ssGetSFcnParamsCount( S ) )
{
mdlCheckParameters( S );
if ( ssGetErrorStatus( S ) != NULL )
return;
}else {
return;
}
#endif
/* sampling */
ssSetNumSampleTimes( S, PORT_BASED_SAMPLE_TIMES );
/* Set number of input ports and tunability */
ssSetSFcnParamTunable( S, DEVICE_INDEX, SS_PRM_NOT_TUNABLE );
/* set the resulting number of ports */
if ( !ssSetNumInputPorts( S, 1 ) )
return;
port = 0;
{
const Frame_T inputsFrames = ( (double) mxGetScalar( ssGetSFcnParam( S, USE_FRAMES ) ) > 0.0) ? FRAME_YES : FRAME_NO;
double sample_time = 1 / mxGetScalar( ssGetSFcnParam( S, SAMPLE_RATE ) );
const int_T buf_length = (int_T) (double) mxGetScalar( ssGetSFcnParam( S, FRAME_LENGTH ) );
const time_T period = (time_T) (sample_time * buf_length);
ssSetInputPortMatrixDimensions( S, port, buf_length, 1 );
ssSetInputPortComplexSignal( S, port, COMPLEX_YES );
ssSetInputPortDataType( S, port, SS_DOUBLE );
ssSetInputPortFrameData( S, port, inputsFrames );
ssSetInputPortDirectFeedThrough( S, port, 1 );
ssSetInputPortSampleTime( S, port, period );
ssSetInputPortOffsetTime( S, port, 0.0 );
}
/* Set number of output ports */
if ( !ssSetNumOutputPorts( S, 0 ) )
return;
/* data port properties */
/* Prepare work Vectors */
ssSetNumPWork( S, P_WORK_LENGTH );
ssSetNumIWork( S, I_WORK_LENGTH );
ssSetNumRWork( S, R_WORK_LENGTH );
ssSetNumModes( S, 0 );
ssSetNumNonsampledZCs( S, 0 );
/* Specify the sim state compliance to be same as a built-in block */
ssSetSimStateCompliance( S, USE_DEFAULT_SIM_STATE );
ssSetOptions( S, 0 );
}
static void mdlInitializeSizes(SimStruct *S)
{
uint_T i;
ssSetNumSFcnParams(S, NUMBER_OF_PARAMS);
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) {
return;
}
} else {
return;
}
#endif
for (i = 0; i < NUMBER_OF_PARAMS; i++) {
ssSetSFcnParamNotTunable(S, i);
}
ssSetNumInputPorts(S, 0);
ssSetNumOutputPorts(S, 1);
ssSetOutputPortWidth(S, 0, 1);
ssSetNumContStates(S, 0);
ssSetNumDiscStates(S, 0);
ssSetNumSampleTimes(S, 1);
ssSetNumPWork(S,1);
ssSetNumIWork(S,1);
ssSetNumRWork(S,2);
}
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* The sizes information is used by Simulink to determine the S-function
* block's characteristics (number of inputs, outputs, states, etc.).
*/
static void mdlInitializeSizes(SimStruct *S)
{
/* See sfuntmpl_doc.c for more details on the macros below */
ssSetNumSFcnParams(S, NUM_PARAMS); /* Number of expected parameters */
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S))
{
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL)
/* Return if number of expected != number of actual parameters */
return;
}
else
return;
ssSetNumContStates(S, 0);
ssSetNumDiscStates(S, 0);
ssSetNumInputPorts(S, 0);
ssSetNumOutputPorts(S, 0);
ssSetNumSampleTimes(S, 1);
ssSetSFcnParamTunable(S, 0, 0);
ssSetSFcnParamTunable(S, 1, 0);
ssSetSFcnParamTunable(S, 2, 0);
ssSetOptions(S, SS_OPTION_EXCEPTION_FREE_CODE | SS_OPTION_CAN_BE_CALLED_CONDITIONALLY);
}
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* The sizes information is used by Simulink to determine the S-function
* block's characteristics (number of inputs, outputs, states, etc.).
*/
static void mdlInitializeSizes(SimStruct *S)
{
/* See sfuntmpl_doc.c for more details on the macros below */
ssSetNumSFcnParams(S, 5); /* Number of expected parameters */
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) {
return;
}
} else {
return; /* Parameter mismatch will be reported by Simulink. */
}
#endif
int_T nRobots = mxGetNumberOfElements(ssGetSFcnParam(S,2));
ssSetNumContStates(S, 0);
ssSetNumDiscStates(S, 0);
if (!ssSetNumInputPorts(S, 0)) return;
//ssSetInputPortWidth(S, 0, 1);
//ssSetInputPortRequiredContiguous(S, 0, true); /*direct input signal access*/
/*
* Set direct feedthrough flag (1=yes, 0=no).
* A port has direct feedthrough if the input is used in either
* the mdlOutputs or mdlGetTimeOfNextVarHit functions.
* See matlabroot/simulink/src/sfuntmpl_directfeed.txt.
*/
//ssSetInputPortDirectFeedThrough(S, 0, 1);
if (!ssSetNumOutputPorts(S, 4)) return;
const int_T nDofs = *((mxChar*)mxGetData(ssGetSFcnParam(S, 4)));
ssSetOutputPortMatrixDimensions(S, 0, nDofs, nRobots); // position
ssSetOutputPortMatrixDimensions(S, 1, nDofs, nRobots); // velocity
ssSetOutputPortMatrixDimensions(S, 2, nDofs, nRobots); // effort
ssSetOutputPortMatrixDimensions(S, 3, 1, nRobots); // SentTime in s;
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 2); // nRobots, nDofs
ssSetNumPWork(S, nRobots + 1); //nRobots x GenericSub, AsyncSpinner
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
/* Specify the sim state compliance to be same as a built-in block */
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
ssSetOptions(S, 0);
}
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* The sizes information is used by Simulink to determine the S-function
* block's characteristics (number of inputs, outputs, states, etc.).
*/
static void mdlInitializeSizes(SimStruct *S) {
/* See sfuntmpl_doc.c for more details on the macros below */
ssSetNumSFcnParams(S, 2); /* Number of expected parameters */
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) {
return;
}
} else {
return; /* Parameter mismatch will be reported by Simulink. */
}
#endif
ssSetNumContStates(S, 0);
ssSetNumDiscStates(S, 0);
if (!ssSetNumInputPorts(S, 2))
return;
ssSetInputPortMatrixDimensions(S, 0, DYNAMICALLY_SIZED, DYNAMICALLY_SIZED); // triangles
ssSetInputPortDataType(S, 0, SS_UINT32);
ssSetInputPortMatrixDimensions(S, 1, DYNAMICALLY_SIZED, DYNAMICALLY_SIZED); // vertices
for (int_T i = 0; i < ssGetNumInputPorts(S); ++i) {
/*direct input signal access*/
ssSetInputPortRequiredContiguous(S, i, true);
/*
* Set direct feedthrough flag (1=yes, 0=no).
* A port has direct feedthrough if the input is used in either
* the mdlOutputs or mdlGetTimeOfNextVarHit functions.
* See matlabroot/simulink/src/sfuntmpl_directfeed.txt.
*/
ssSetInputPortDirectFeedThrough(S, i, 1);
}
if (!ssSetNumOutputPorts(S, 0))
return;
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 0);
ssSetNumPWork(S, 2); //GenericPub and frame id
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
/* Specify the sim state compliance to be same as a built-in block */
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
ssSetOptions(S, 0);
}
// Function: mdlInitializeSizes ===============================================
// Abstract:
// The sizes information is used by Simulink to determine the S-function
// block's characteristics (number of inputs, s, states, etc.).
static void mdlInitializeSizes(SimStruct *S)
{
ssSetNumSFcnParams(S, NPARAMS);
#if defined(MATLAB_MEX_FILE)
if(ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)){
mdlCheckParameters(S);
if(ssGetErrorStatus(S)!=NULL){
return;
}
else{
cout<<"All parameters have been checked and passed correctly"<<endl;
}
} else{
return; // Parameter mismatch reported by Simulink
}
#endif
// Parameter mismatch will be reported by Simulink
if (ssGetNumSFcnParams(S) != ssGetSFcnParamsCount(S)) {
return;
}
// Specify I/O
// INPUTS
if(!ssSetNumInputPorts(S,0)) return;
// OUTPUTS
if (!ssSetNumOutputPorts(S,SIZE_READING_PORT)) return;
for (int i = 0; i < SIZE_READING_PORT; i++)
{
ssSetOutputPortWidth (S, i, 1);
ssSetOutputPortDataType(S, i, 0);
}
ssSetNumSampleTimes(S, 1);
// Reserve place for C++ object
ssSetNumPWork(S, 1);
// DWork vectors
ssSetNumDWork(S, 1);
ssSetDWorkWidth(S, 0, 1);
ssSetDWorkDataType(S, 0, SS_DOUBLE);
ssSetSimStateCompliance(S, USE_CUSTOM_SIM_STATE);
ssSetOptions(S,
SS_OPTION_WORKS_WITH_CODE_REUSE |
SS_OPTION_EXCEPTION_FREE_CODE |
SS_OPTION_ALLOW_INPUT_SCALAR_EXPANSION |
SS_OPTION_USE_TLC_WITH_ACCELERATOR);
}
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* The sizes information is used by Simulink to determine the S-function
* block's characteristics (number of inputs, outputs, states, etc.).
*/
static void mdlInitializeSizes(SimStruct *S)
{
ssSetNumSFcnParams(S, NPARAMS); /* Number of expected parameters */
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) {
return;
}
} else {
return; /* Parameter mismatch will be reported by Simulink */
}
#endif
{
int iParam = 0;
int nParam = ssGetNumSFcnParams(S);
for ( iParam = 0; iParam < nParam; iParam++ )
{
ssSetSFcnParamTunable( S, iParam, SS_PRM_SIM_ONLY_TUNABLE );
}
}
ssSetNumContStates(S, NSTATES);
ssSetNumDiscStates(S, 0);
if (!ssSetNumInputPorts(S, NINPUTS)) return;
ssSetInputPortWidth(S, 0, 1);
ssSetInputPortDirectFeedThrough(S, 0, TRUE);
ssSetInputPortWidth(S, 1, 1);
ssSetInputPortDirectFeedThrough(S, 1, TRUE);
ssSetInputPortWidth(S, 2, 1);
ssSetInputPortDirectFeedThrough(S, 2, TRUE);
if (!ssSetNumOutputPorts(S, NOUTPUTS)) return;
//ssSetOutputPortWidth(S, 0, NOUTPUTS);
{
ssSetOutputPortWidth(S, 0, 1);
}
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 0);
ssSetNumPWork(S, 0);
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
/* Take care when specifying exception free code - see sfuntmpl_doc.c */
ssSetOptions(S, SS_OPTION_EXCEPTION_FREE_CODE);
}
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* Setup sizes of the various vectors.
*/
static void mdlInitializeSizes(SimStruct *S)
{
DECL_AND_INIT_DIMSINFO(inputDimsInfo);
DECL_AND_INIT_DIMSINFO(outputDimsInfo);
ssSetNumSFcnParams(S, NPARAMS); /* Number of expected parameters */
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) {
return;
}
} else {
return; /* Parameter mismatch will be reported by Simulink */
}
#endif
ssSetNumContStates(S, NUM_CONT_STATES);
ssSetNumDiscStates(S, NUM_DISC_STATES);
if (!ssSetNumInputPorts(S, NUM_INPUTS)) return;
inputDimsInfo.width = INPUT_0_WIDTH;
ssSetInputPortDimensionInfo(S, 0, &inputDimsInfo);
ssSetInputPortFrameData(S, 0, IN_0_FRAME_BASED);
ssSetInputPortDataType(S, 0, SS_UINT32);
ssSetInputPortComplexSignal(S, 0, INPUT_0_COMPLEX);
ssSetInputPortDirectFeedThrough(S, 0, INPUT_0_FEEDTHROUGH);
ssSetInputPortRequiredContiguous(S, 0, 1); /*direct input signal access*/
if (!ssSetNumOutputPorts(S, NUM_OUTPUTS)) return;
outputDimsInfo.width = OUTPUT_0_WIDTH;
ssSetOutputPortDimensionInfo(S, 0, &outputDimsInfo);
ssSetOutputPortFrameData(S, 0, OUT_0_FRAME_BASED);
ssSetOutputPortDataType(S, 0, SS_DOUBLE);
ssSetOutputPortComplexSignal(S, 0, OUTPUT_0_COMPLEX);
ssSetOutputPortComplexSignal(S, 0, OUTPUT_0_COMPLEX);
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 0);
ssSetNumPWork(S, 0);
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
/* Take care when specifying exception free code - see sfuntmpl_doc.c */
ssSetOptions(S, (SS_OPTION_EXCEPTION_FREE_CODE |
SS_OPTION_WORKS_WITH_CODE_REUSE));
}
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* The sizes information is used by Simulink to determine the S-function
* block's characteristics (number of inputs, outputs, states, etc.).
*/
static void mdlInitializeSizes(SimStruct *S)
{
/* See sfuntmpl_doc.c for more details on the macros below */
ssSetNumSFcnParams(S, 5); /* Number of expected parameters */
#if defined(MATLAB_MEX_FILE)
if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {
mdlCheckParameters(S);
if (ssGetErrorStatus(S) != NULL) {
return;
}
} else {
return; /* Parameter mismatch will be reported by Simulink. */
}
#endif
ssSetNumContStates(S, 0);
ssSetNumDiscStates(S, 0);
if (!ssSetNumInputPorts(S, 0)) return;
if (!ssSetNumOutputPorts(S, 0)) return;
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 1); // nWaitTopic
size_t wait_buflen = mxGetN((ssGetSFcnParam(S, 2)))*sizeof(mxChar)+1;
char* wait_name = (char*)mxMalloc(wait_buflen);
mxGetString((ssGetSFcnParam(S, 2)), wait_name, wait_buflen);
char * topic = strtok(wait_name, TOPIC_SEPARATORS);
unsigned int nWaitTopic = 0;
while (topic != NULL){
nWaitTopic++;
topic = strtok(NULL, TOPIC_SEPARATORS);
}
mxFree(wait_name);
ssSetNumPWork(S, 4+nWaitTopic+1); //Start + Stop + Synchronous + Trigger services + wait_topic Subscriber(s) + AsyncSpinner
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
/* Specify the sim state compliance to be same as a built-in block */
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
ssSetOptions(S, 0);
}
