static void xtfpga_net_init(MemoryRegion *address_space,
hwaddr base,
hwaddr descriptors,
hwaddr buffers,
qemu_irq irq, NICInfo *nd)
{
DeviceState *dev;
SysBusDevice *s;
MemoryRegion *ram;
dev = qdev_create(NULL, "open_eth");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, irq);
memory_region_add_subregion(address_space, base,
sysbus_mmio_get_region(s, 0));
memory_region_add_subregion(address_space, descriptors,
sysbus_mmio_get_region(s, 1));
ram = g_malloc(sizeof(*ram));
memory_region_init_ram_nomigrate(ram, OBJECT(s), "open_eth.ram", 16384,
&error_fatal);
vmstate_register_ram_global(ram);
memory_region_add_subregion(address_space, buffers, ram);
}
/* System RAM */
static void ram_realize(DeviceState *dev, Error **errp)
{
RamDevice *d = SUN4U_RAM(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
memory_region_init_ram_nomigrate(&d->ram, OBJECT(d), "sun4u.ram", d->size,
&error_fatal);
vmstate_register_ram_global(&d->ram);
sysbus_init_mmio(sbd, &d->ram);
}
static void prom_init1(Object *obj)
{
PROMState *s = OPENPROM(obj);
SysBusDevice *dev = SYS_BUS_DEVICE(obj);
memory_region_init_ram_nomigrate(&s->prom, obj, "sun4u.prom", PROM_SIZE_MAX,
&error_fatal);
vmstate_register_ram_global(&s->prom);
memory_region_set_readonly(&s->prom, true);
sysbus_init_mmio(dev, &s->prom);
}
static void cg3_initfn(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
CG3State *s = CG3(obj);
memory_region_init_ram_nomigrate(&s->rom, obj, "cg3.prom", FCODE_MAX_ROM_SIZE,
&error_fatal);
memory_region_set_readonly(&s->rom, true);
sysbus_init_mmio(sbd, &s->rom);
memory_region_init_io(&s->reg, obj, &cg3_reg_ops, s, "cg3.reg",
CG3_REG_SIZE);
sysbus_init_mmio(sbd, &s->reg);
}
/* ram_size must be set to match the upper bound of memory in the
* device tree (linux/arch/arm/boot/dts/highbank.dts), which is
* normally 0xff900000 or -m 4089. When running this board on a
* 32-bit host, set the reg value of memory to 0xf7ff00000 in the
* device tree and pass -m 2047 to QEMU.
*/
static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
DeviceState *dev = NULL;
SysBusDevice *busdev;
qemu_irq pic[128];
int n;
qemu_irq cpu_irq[4];
qemu_irq cpu_fiq[4];
MemoryRegion *sysram;
MemoryRegion *dram;
MemoryRegion *sysmem;
char *sysboot_filename;
switch (machine_id) {
case CALXEDA_HIGHBANK:
machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
break;
case CALXEDA_MIDWAY:
machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
break;
default:
assert(0);
}
for (n = 0; n < smp_cpus; n++) {
Object *cpuobj;
ARMCPU *cpu;
cpuobj = object_new(machine->cpu_type);
cpu = ARM_CPU(cpuobj);
object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_SMC,
"psci-conduit", &error_abort);
if (n) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(cpuobj, true,
"start-powered-off", &error_abort);
}
if (object_property_find(cpuobj, "reset-cbar", NULL)) {
object_property_set_int(cpuobj, MPCORE_PERIPHBASE,
"reset-cbar", &error_abort);
}
object_property_set_bool(cpuobj, true, "realized", &error_fatal);
cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
cpu_fiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ);
}
sysmem = get_system_memory();
dram = g_new(MemoryRegion, 1);
memory_region_allocate_system_memory(dram, NULL, "highbank.dram", ram_size);
/* SDRAM at address zero. */
memory_region_add_subregion(sysmem, 0, dram);
sysram = g_new(MemoryRegion, 1);
memory_region_init_ram_nomigrate(sysram, NULL, "highbank.sysram", 0x8000,
&error_fatal);
memory_region_add_subregion(sysmem, 0xfff88000, sysram);
if (bios_name != NULL) {
sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (sysboot_filename != NULL) {
if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
error_report("Unable to load %s", bios_name);
exit(1);
}
g_free(sysboot_filename);
} else {
error_report("Unable to find %s", bios_name);
exit(1);
}
}
switch (machine_id) {
case CALXEDA_HIGHBANK:
dev = qdev_create(NULL, "l2x0");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff12000);
dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
break;
case CALXEDA_MIDWAY:
dev = qdev_create(NULL, TYPE_A15MPCORE_PRIV);
break;
}
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]);
}
for (n = 0; n < 128; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
dev = qdev_create(NULL, "sp804");
qdev_prop_set_uint32(dev, "freq0", 150000000);
qdev_prop_set_uint32(dev, "freq1", 150000000);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff34000);
sysbus_connect_irq(busdev, 0, pic[18]);
pl011_create(0xfff36000, pic[20], serial_hds[0]);
dev = qdev_create(NULL, TYPE_HIGHBANK_REGISTERS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff3c000);
sysbus_create_simple("pl061", 0xfff30000, pic[14]);
sysbus_create_simple("pl061", 0xfff31000, pic[15]);
sysbus_create_simple("pl061", 0xfff32000, pic[16]);
sysbus_create_simple("pl061", 0xfff33000, pic[17]);
sysbus_create_simple("pl031", 0xfff35000, pic[19]);
sysbus_create_simple("pl022", 0xfff39000, pic[23]);
sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]);
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]);
qemu_check_nic_model(&nd_table[1], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[1]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]);
}
/* TODO create and connect IDE devices for ide_drive_get() */
highbank_binfo.ram_size = ram_size;
highbank_binfo.kernel_filename = kernel_filename;
highbank_binfo.kernel_cmdline = kernel_cmdline;
highbank_binfo.initrd_filename = initrd_filename;
/* highbank requires a dtb in order to boot, and the dtb will override
* the board ID. The following value is ignored, so set it to -1 to be
* clear that the value is meaningless.
*/
highbank_binfo.board_id = -1;
highbank_binfo.nb_cpus = smp_cpus;
highbank_binfo.loader_start = 0;
highbank_binfo.write_secondary_boot = hb_write_secondary;
highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
if (!kvm_enabled()) {
highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR;
highbank_binfo.write_board_setup = hb_write_board_setup;
highbank_binfo.secure_board_setup = true;
} else {
warn_report("cannot load built-in Monitor support "
"if KVM is enabled. Some guests (such as Linux) "
"may not boot.");
}
arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
}
static void aspeed_soc_realize(DeviceState *dev, Error **errp)
{
int i;
AspeedSoCState *s = ASPEED_SOC(dev);
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
Error *err = NULL, *local_err = NULL;
/* IO space */
memory_region_init_io(&s->iomem, NULL, &aspeed_soc_io_ops, NULL,
"aspeed_soc.io", ASPEED_SOC_IOMEM_SIZE);
memory_region_add_subregion_overlap(get_system_memory(),
ASPEED_SOC_IOMEM_BASE, &s->iomem, -1);
/* CPU */
object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
/* SRAM */
memory_region_init_ram_nomigrate(&s->sram, OBJECT(dev), "aspeed.sram",
sc->info->sram_size, &err);
if (err) {
error_propagate(errp, err);
return;
}
vmstate_register_ram_global(&s->sram);
memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE,
&s->sram);
/* VIC */
object_property_set_bool(OBJECT(&s->vic), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
/* Timer */
object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE);
for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) {
qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
/* SCU */
object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE);
/* UART - attach an 8250 to the IO space as our UART5 */
if (serial_hds[0]) {
qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
serial_mm_init(&s->iomem, ASPEED_SOC_UART_5_BASE, 2,
uart5, 38400, serial_hds[0], DEVICE_LITTLE_ENDIAN);
}
/* I2C */
object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 12));
/* FMC, The number of CS is set at the board level */
object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
s->fmc.ctrl->flash_window_base);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 19));
/* SPI */
for (i = 0; i < sc->info->spis_num; i++) {
object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err);
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
&local_err);
error_propagate(&err, local_err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1,
s->spi[i].ctrl->flash_window_base);
}
/* SDMC - SDRAM Memory Controller */
object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE);
/* Watch dog */
for (i = 0; i < sc->info->wdts_num; i++) {
object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
ASPEED_SOC_WDT_BASE + i * 0x20);
}
/* Net */
qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]);
object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err);
object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized",
&local_err);
error_propagate(&err, local_err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 2));
}
