Exemplos de msm8960_ext_spk_power_amp_on em C++ (Cpp)

Exemplo n.º 1

Arquivo: msm8930.c Projeto: rspousta/sony_xperia_m

static int msm8930_spkramp_event(struct snd_soc_dapm_widget *w,
	struct snd_kcontrol *k, int event)
{
	pr_debug("%s() %x\n", __func__, SND_SOC_DAPM_EVENT_ON(event));
	if (SND_SOC_DAPM_EVENT_ON(event)) {
		if (!strncmp(w->name, "Ext Spk Left Pos", 17))
			msm8960_ext_spk_power_amp_on(SPK_AMP_POS);
		else if (!strncmp(w->name, "Ext Spk Left Neg", 17))
			msm8960_ext_spk_power_amp_on(SPK_AMP_NEG);
		else {
			pr_err("%s() Invalid Speaker Widget = %s\n",
					__func__, w->name);
			return -EINVAL;
		}
	} else {
		if (!strncmp(w->name, "Ext Spk Left Pos", 17))
			msm8960_ext_spk_power_amp_off(SPK_AMP_POS);
		else if (!strncmp(w->name, "Ext Spk Left Neg", 17))
			msm8960_ext_spk_power_amp_off(SPK_AMP_NEG);
		else {
			pr_err("%s() Invalid Speaker Widget = %s\n",
					__func__, w->name);
			return -EINVAL;
		}
	}
	return 0;
}

Exemplo n.º 2

static int msm8960_spkramp_event(struct snd_soc_dapm_widget *w,
	struct snd_kcontrol *k, int event)
{
#if defined (CONFIG_MACH_MSM8960_SIRIUSLTE)
	int ret;
#endif
	pr_debug("%s() %x\n", __func__, SND_SOC_DAPM_EVENT_ON(event));

	if (SND_SOC_DAPM_EVENT_ON(event)) {
		if (!strncmp(w->name, "Ext Spk Bottom Pos", 18))
			msm8960_ext_spk_power_amp_on(BOTTOM_SPK_AMP_POS);
		else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18))
			msm8960_ext_spk_power_amp_on(BOTTOM_SPK_AMP_NEG);
		else if (!strncmp(w->name, "Ext Spk Top Pos", 15))
			msm8960_ext_spk_power_amp_on(TOP_SPK_AMP_POS);
		else if  (!strncmp(w->name, "Ext Spk Top Neg", 15))
			msm8960_ext_spk_power_amp_on(TOP_SPK_AMP_NEG);
		else {
			pr_err("%s() Invalid Speaker Widget = %s\n",
					__func__, w->name);
			return -EINVAL;
		}

#if defined (CONFIG_MACH_MSM8960_SIRIUSLTE)
		if (SND_SOC_DAPM_EVENT_ON(event) == SND_SOC_DAPM_POST_PMU)
		{
			ret = snd_subsystem_sp_poweron();
			if (ret < 0)
			{
				pr_err("[ak7811] spkamp_event SPK ON fail...\n");
				return -EINVAL;
			}
		}
#endif		
	} else {
#if defined (CONFIG_MACH_MSM8960_SIRIUSLTE)
		ret = snd_subsystem_standby(SYSTEM_OFF);
		if (ret < 0)
		{
			pr_err("[ak7811] spkamp_event SPK OFF fail...\n");
			return -EINVAL;
		}
#endif		
		if (!strncmp(w->name, "Ext Spk Bottom Pos", 18))
			msm8960_ext_spk_power_amp_off(BOTTOM_SPK_AMP_POS);
		else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18))
			msm8960_ext_spk_power_amp_off(BOTTOM_SPK_AMP_NEG);
		else if (!strncmp(w->name, "Ext Spk Top Pos", 15))
			msm8960_ext_spk_power_amp_off(TOP_SPK_AMP_POS);
		else if  (!strncmp(w->name, "Ext Spk Top Neg", 15))
			msm8960_ext_spk_power_amp_off(TOP_SPK_AMP_NEG);
		else {
			pr_err("%s() Invalid Speaker Widget = %s\n",
					__func__, w->name);
			return -EINVAL;
		}
	}
	return 0;
}

Exemplo n.º 3

Arquivo: board-jet-audio.c Projeto: MassStash/sensejb

static int msm8960_spkramp_event(struct snd_soc_dapm_widget *w,
	struct snd_kcontrol *k, int event)
{
	pr_info("%s() %x\n", __func__, SND_SOC_DAPM_EVENT_ON(event));

	if (SND_SOC_DAPM_EVENT_ON(event)) {
		if (!strncmp(w->name, "Ext Spk Bottom Pos", 18))
			msm8960_ext_spk_power_amp_on(BOTTOM_SPK_AMP_POS);
		else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18))
			msm8960_ext_spk_power_amp_on(BOTTOM_SPK_AMP_NEG);
		else if (!strncmp(w->name, "Ext USB AMP Pos", 15))
			msm8960_ext_spk_power_amp_on(USB_EXT_AMP_POS);
		else if  (!strncmp(w->name, "Ext USB AMP Neg", 15))
			msm8960_ext_spk_power_amp_on(USB_EXT_AMP_NEG);
		else {
			pr_err("%s() Invalid Speaker Widget = %s\n",
					__func__, w->name);
			return -EINVAL;
		}

	} else {
		if (!strncmp(w->name, "Ext Spk Bottom Pos", 18))
			msm8960_ext_spk_power_amp_off(BOTTOM_SPK_AMP_POS);
		else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18))
			msm8960_ext_spk_power_amp_off(BOTTOM_SPK_AMP_NEG);
		else if (!strncmp(w->name, "Ext USB AMP Pos", 15))
			msm8960_ext_spk_power_amp_off(USB_EXT_AMP_POS);
		else if  (!strncmp(w->name, "Ext USB AMP Neg", 15))
			msm8960_ext_spk_power_amp_off(USB_EXT_AMP_NEG);
		else {
			pr_err("%s() Invalid Speaker Widget = %s\n",
					__func__, w->name);
			return -EINVAL;
		}
	}
	return 0;
}

Exemplo n.º 4

Arquivo: board-fighter-audio.c Projeto: KIMMINWOO/FusionUlt-AOSP-MR1

static int fighter_spk_power_amp_on(struct snd_soc_dapm_widget *w,
	struct snd_kcontrol *kcontrol, int event)
{

	pr_info("%s %d\n", __func__, event);
	switch (event) {
	case SND_SOC_DAPM_PRE_PMU:
		msm8960_ext_spk_power_amp_on(
			BOTTOM_SPK_AMP_POS|BOTTOM_SPK_AMP_NEG);
		break;
	case SND_SOC_DAPM_POST_PMD:
		msm8960_ext_spk_power_amp_off(
			BOTTOM_SPK_AMP_POS|BOTTOM_SPK_AMP_NEG);
		break;
	}

	return 0;
}