void platform_early_init(void)
{
#ifdef LK_PROFILING
unsigned int time_led_init;
unsigned int time_pmic6329_init;
unsigned int time_i2c_init;
unsigned int time_disp_init;
unsigned int time_platform_early_init;
time_platform_early_init = get_timer(0);
#endif
/* initialize the uart */
uart_init_early();
/* initialize the frame buffet information */
g_fb_size = mt_disp_get_vram_size();
g_fb_base = memory_size() - g_fb_size;
dprintf(INFO, "FB base = 0x%x, FB size = %d\n", g_fb_base, g_fb_size);
platform_init_interrupts();
platform_early_init_timer();
mt_gpio_set_default();
#ifdef LK_PROFILING
time_i2c_init = get_timer(0);
#endif
// i2c_v1_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- i2c init takes %d ms -------- \n", get_timer(time_i2c_init));
#endif
mtk_wdt_init();
#ifdef LK_PROFILING
time_led_init = get_timer(0);
#endif
leds_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- led init takes %d ms -------- \n", get_timer(time_led_init));
#endif
isink0_init(); //turn on PMIC6329 isink0
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
mt_disp_init((void *)g_fb_base);
#ifdef LK_PROFILING
printf("[PROFILE] ------- disp init takes %d ms -------- \n", get_timer(time_disp_init));
#endif
#ifdef CONFIG_CFB_CONSOLE
drv_video_init();
#endif
#ifdef LK_PROFILING
time_pmic6329_init = get_timer(0);
#endif
pmic6329_init();
//<2013/01/03-samhuang, improve KPI-0092 to add VIB before show logo.
lk_vibr_enable();
//>2013/01/03-samhuang
#ifdef LK_PROFILING
printf("[PROFILE] ------- pmic6329_init takes %d ms -------- \n", get_timer(time_pmic6329_init));
printf("[PROFILE] ------- platform_early_init takes %d ms -------- \n", get_timer(time_platform_early_init));
#endif
}
//#define PMIC_WRAP_PORTING //only for lk early porting
void platform_early_init(void)
{
#ifdef LK_PROFILING
unsigned int time_led_init;
unsigned int time_pmic6329_init;
unsigned int time_platform_early_init;
unsigned int time_repair_sram;
unsigned int time_display_early_init;
unsigned int time_wdt_early_init;
time_platform_early_init = get_timer(0);
#endif
/* initialize the uart */
uart_init_early();
platform_init_interrupts();
platform_early_init_timer();
mt_gpio_set_default();
#ifdef REPAIR_SRAM_ENABLE_LK_FOR_82_BRINGUP
#ifdef LK_PROFILING
time_repair_sram = get_timer(0);
#endif
int repair_ret;
repair_ret = repair_sram();
if(repair_ret != 0)
{
printf("Sram repair failed %d\n", repair_ret);
while(1);
}
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Repair SRAM takes %d ms -------- \n",(int) get_timer(time_repair_sram));
#endif
#endif
//i2c_v1_init();
#ifdef LK_PROFILING
time_wdt_early_init = get_timer(0);
#endif
mtk_wdt_init();
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- WDT Init takes %d ms -------- \n", (int)get_timer(time_wdt_early_init));
#endif
// WDT will be triggered when uncompressing linux image on FPGA
#ifdef MACH_FPGA
mtk_wdt_disable();
#endif
#ifdef MTK_MT8193_SUPPORT
mt8193_init();
#endif
/* initialize the frame buffet information */
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef LK_PROFILING
time_display_early_init = get_timer(0);
#endif
g_fb_size = mt_disp_get_vram_size();
g_fb_base = memory_size() - g_fb_size + DRAM_PHY_ADDR;
dprintf(INFO, "FB base = 0x%x, FB size = %d\n", g_fb_base, g_fb_size);
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Display eraly init takes %d ms -------- \n", (int)get_timer(time_display_early_init));
#endif
#endif
#ifdef LK_PROFILING
time_led_init = get_timer(0);
#endif
#ifndef MACH_FPGA
leds_init();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- led init takes %d ms -------- \n", get_timer(time_led_init));
#endif
isink0_init(); //turn on PMIC6329 isink0
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (!(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode ==CMD_MODE))
mt_disp_init((void *)g_fb_base);
#endif
#ifdef PMIC_WRAP_PORTING
pwrap_init_lk();
pwrap_init_for_early_porting();
#endif
#ifdef LK_PROFILING
time_pmic6329_init = get_timer(0);
#endif
pmic_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- pmic_init takes %d ms -------- \n", get_timer(time_pmic6329_init));
printf("[PROFILE] ------- platform_early_init takes %d ms -------- \n", get_timer(time_platform_early_init));
#endif
}
void platform_init(void)
{
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
unsigned int time_env;
unsigned int time_disp_init;
unsigned int time_security_init;
unsigned int time_RTC_boot_Check;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
dprintf(INFO, "platform_init()\n");
#ifdef DUMMY_AP
dummy_ap_entry();
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
#ifndef MACH_FPGA
nand_init();
nand_driver_test();
#endif
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if((g_boot_arg->boot_reason == BR_USB) && (upmu_is_chr_det() == KAL_FALSE))
{
printf("[%s] Unplugged Charger/Usb between Pre-loader and Uboot in Kernel Charging Mode, Power Off \n", __func__);
mt6575_power_off();
}
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_env = get_timer(0);
#endif
env_init();
print_env();
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- ENV init takes %d ms -------- \n", (int)get_timer(time_env));
#endif
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode ==CMD_MODE)
mt_disp_init((void *)g_fb_base);
#endif
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- disp init takes %d ms -------- \n", (int)get_timer(time_disp_init));
#endif
#ifdef LK_PROFILING
time_load_logo = get_timer(0);
#endif
#ifdef CONFIG_CFB_CONSOLE
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
drv_video_init();
#endif
#endif
//#endif
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
dprintf(INFO, "Show BLACK_PICTURE\n");
#endif
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
if(!is_low_battery(0))
{
#endif
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_power(TRUE);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_wait_idle();
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_wait_idle();
mt_disp_power(1); //power on display related modules
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
/*for kpd pmic mode setting*/
set_kpd_pmic_mode();
//FIXME: Disable for MT6582 FPGA Ealry Porting
//#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
if(!is_low_battery(0))
{
#endif
/*some lcm panel need more time to start show picture*/
msleep(50);
mt65xx_backlight_on();
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
//#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
#ifdef MTK_SECURITY_SW_SUPPORT
#ifdef LK_PROFILING
time_security_init = get_timer(0);
#endif
/* initialize security library */
#ifdef MTK_EMMC_SUPPORT
sec_func_init(1);
#else
sec_func_init(0);
#endif
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Security init takes %d ms -------- \n", (int)get_timer(time_security_init));
#endif
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
printf("[LK] boot mode is DOWNLOAD_BOOT\n");
#ifdef MTK_SECURITY_SW_SUPPORT
/* verify da before jumping to da*/
if (sec_usbdl_enabled()) {
u8 *da_addr = (u8 *)g_boot_arg->da_info.addr;
u32 da_len = g_boot_arg->da_info.len;
u32 sig_len = g_boot_arg->da_info.sig_len;
u8 *sig_addr = (unsigned char *)da_addr + (da_len - sig_len);
if (da_len == 0 || sig_len == 0) {
printf("[LK] da argument is invalid\n");
printf("da_addr = 0x%x\n", da_addr);
printf("da_len = 0x%x\n", da_len);
printf("sig_len = 0x%x\n", sig_len);
}
if (sec_usbdl_verify_da(da_addr, (da_len - sig_len), sig_addr, sig_len)) {
/* da verify fail */
video_printf(" => Not authenticated tool, download stop...\n");
while(1); /* fix me, should not be infinite loop in lk */
}
}
else
#endif
{
printf(" DA verification disabled...\n");
}
mt_disp_show_boot_logo();
video_printf(" => Downloading...\n");
mt65xx_backlight_on();
mtk_wdt_disable();//Disable wdt before jump to DA
platform_uninit();
#ifdef HAVE_CACHE_PL310
l2_disable();
#endif
#ifdef ENABLE_L2_SHARING
config_shared_SRAM_size();
#endif
arch_disable_cache(UCACHE);
arch_disable_mmu();
jump_da(g_boot_arg->da_info.addr, g_boot_arg->da_info.arg1, g_boot_arg->da_info.arg2);
}
#ifdef LK_PROFILING
time_bat_init = get_timer(0);
#endif
mt65xx_bat_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- battery init takes %d ms -------- \n", get_timer(time_bat_init));
#endif
#ifndef CFG_POWER_CHARGING
#ifdef LK_PROFILING
time_RTC_boot_Check = get_timer(0);
#endif
/* NOTE: if define CFG_POWER_CHARGING, will rtc_boot_check() in mt65xx_bat_init() */
rtc_boot_check(false);
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- RTC boot check Init takes %d ms -------- \n", (int)get_timer(time_RTC_boot_Check));
#endif
#endif
#ifdef LK_PROFILING
time_show_logo = get_timer(0);
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if(kernel_charging_boot() == 1)
{
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
CHARGER_TYPE CHR_Type_num = CHARGER_UNKNOWN;
charging_get_charger_type(&CHR_Type_num);
if ((g_boot_mode != LOW_POWER_OFF_CHARGING_BOOT) ||
((CHR_Type_num != STANDARD_HOST) && (CHR_Type_num != NONSTANDARD_CHARGER)))
{
dprintf(INFO, "[PROFILE] ------- g_boot_mode = %d -------- \n", g_boot_mode);
#endif
mt_disp_power(TRUE);
mt_disp_show_low_battery();
mt_disp_wait_idle();
mt65xx_leds_brightness_set(6, 110);
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
}
else if(g_boot_mode != KERNEL_POWER_OFF_CHARGING_BOOT && g_boot_mode != LOW_POWER_OFF_CHARGING_BOOT)
{
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (g_boot_mode != ALARM_BOOT && (g_boot_mode != FASTBOOT))
{
mt_disp_show_boot_logo();
}
#endif
}
#else
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (g_boot_mode != ALARM_BOOT && (g_boot_mode != FASTBOOT))
{
mt_disp_show_boot_logo();
}
#endif
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- show logo takes %d ms -------- \n", get_timer(time_show_logo));
time_sw_env= get_timer(0);
#endif
//sw_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- sw_env takes %d ms -------- \n", get_timer(time_sw_env));
printf("[PROFILE] ------- platform_init takes %d ms -------- \n", get_timer(time_platform_init));
#endif
}
void platform_early_init(void)
{
#ifdef LK_PROFILING
unsigned int time_led_init;
unsigned int time_pmic6329_init;
unsigned int time_i2c_init;
unsigned int time_disp_init;
unsigned int time_platform_early_init;
time_platform_early_init = get_timer(0);
#endif
/* initialize the frame buffet information */
g_fb_size = mt_disp_get_vram_size();
g_fb_base = memory_size() - g_fb_size + DRAM_PHY_ADDR;
dprintf(INFO, "FB base = 0x%x, FB size = %d\n", g_fb_base, g_fb_size);
platform_init_interrupts();
platform_early_init_timer();
mt_gpio_set_default();
/* initialize the uart */
uart_init_early();
#ifdef LK_PROFILING
time_i2c_init = get_timer(0);
#endif
mt_i2c_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- i2c init takes %d ms -------- \n", get_timer(time_i2c_init));
#endif
mtk_wdt_init();
#ifdef LK_PROFILING
time_led_init = get_timer(0);
#endif
#ifndef MACH_FPAG
leds_init();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- led init takes %d ms -------- \n", get_timer(time_led_init));
#endif
isink0_init(); //turn on PMIC6329 isink0
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
mt_disp_init((void *)g_fb_base);
#ifdef LK_PROFILING
printf("[PROFILE] ------- disp init takes %d ms -------- \n", get_timer(time_disp_init));
#endif
#ifdef CONFIG_CFB_CONSOLE
drv_video_init();
#endif
#ifdef MACH_FPGA
pwrap_init_lk();
pwrap_init_for_early_porting();
#endif
#ifdef LK_PROFILING
time_pmic6329_init = get_timer(0);
#endif
pmic6320_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- pmic6329_init takes %d ms -------- \n", get_timer(time_pmic6329_init));
printf("[PROFILE] ------- platform_early_init takes %d ms -------- \n", get_timer(time_platform_early_init));
#endif
}
