float Height_Ctrl(float T,float thr,u8 ready,float en)
{
static u8 step,speed_cnt,height_cnt;
if(ready == 0)
{
ex_i_en = ex_i_en_f = 0;
en = 0;
thr_take_off = 0;
thr_take_off_f = 0;
}
switch(step)
{
case 0:
{
//step = 1;
break;
}
case 1:
{
step = 2;
break;
}
case 2:
{
step = 3;
break;
}
case 3:
{
step = 4;
break;
}
case 4:
{
step = 0;
break;
}
default:break;
}
/*飞行中初次进入定高模式切换处理*/
if(ABS(en - en_old) > 0.5f)//从非定高切换到定高
{
if(thr_take_off<10)//未计算起飞油门
{
if(thr_set > -150)
{
thr_take_off = 400;
}
}
en_old = en;
}
/*定高控制*/
//h_pid_init();
thr_set = my_deathzoom_2(my_deathzoom((thr - 500),0,40),0,10);
if(thr_set>0)
{
set_speed_t = thr_set/450 * MAX_VERTICAL_SPEED_UP;
if(thr_set>100)
{
ex_i_en_f = 1;
if(!thr_take_off_f)
{
thr_take_off_f = 1; //用户可能想要起飞
thr_take_off = 350; //直接赋值 一次
}
}
}
else
{
if(ex_i_en_f == 1)
{
ex_i_en = 1;
}
set_speed_t = thr_set/450 * MAX_VERTICAL_SPEED_DW;
}
set_speed_t = LIMIT(set_speed_t,-MAX_VERTICAL_SPEED_DW,MAX_VERTICAL_SPEED_UP);
//exp_speed =my_pow_2_curve(exp_speed_t,0.45f,MAX_VERTICAL_SPEED);
LPF_1_(10.0f,T,my_pow_2_curve(set_speed_t,0.25f,MAX_VERTICAL_SPEED_DW),set_speed);
set_speed = LIMIT(set_speed,-MAX_VERTICAL_SPEED_DW,MAX_VERTICAL_SPEED_UP);
/////////////////////////////////////////////////////////////////////////////////
baro_ctrl(T,&hc_value); //高度数据获取： 气压计数据
/////////////////////////////////////////////////////////////////////////////////
//计算高度误差（可加滤波）
set_height_em += (set_speed - hc_value.m_speed) *T;
set_height_em = LIMIT(set_height_em,-5000 *ex_i_en,5000 *ex_i_en);
set_height_e += (set_speed - 1.05f *hc_value.fusion_speed) *T;
set_height_e = LIMIT(set_height_e,-5000 *ex_i_en,5000 *ex_i_en);
LPF_1_(0.05f,T,set_height_em,set_height_e);
/////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////
if(en < 0.1f)
{
exp_speed = hc_value.fusion_speed;
exp_acc = hc_value.fusion_acc;
}
/////////////////////////////////////////////////////////////////////////////////
float acc_i_lim;
acc_i_lim = safe_div(150,h_acc_arg.ki,0);
fb_speed_old = fb_speed;
fb_speed = hc_value.fusion_speed;
fb_acc = safe_div(fb_speed - fb_speed_old,T,0);
thr_pid_out = PID_calculate( T, //周期
exp_acc, //前馈
exp_acc, //期望值（设定值）
fb_acc, //反馈值
&h_acc_arg, //PID参数结构体
&h_acc_val, //PID数据结构体
acc_i_lim*en //integration limit，积分限幅
); //输出
//step_filter(1000 *T,thr_pid_out,thr_pid_out_dlim);
//起飞油门
if(h_acc_val.err_i > (acc_i_lim * 0.2f))
{
if(thr_take_off<THR_TAKE_OFF_LIMIT)
{
thr_take_off += 150 *T;
h_acc_val.err_i -= safe_div(150,h_acc_arg.ki,0) *T;
}
}
else if(h_acc_val.err_i < (-acc_i_lim * 0.2f))
{
if(thr_take_off>0)
{
thr_take_off -= 150 *T;
h_acc_val.err_i += safe_div(150,h_acc_arg.ki,0) *T;
}
}
thr_take_off = LIMIT(thr_take_off,0,THR_TAKE_OFF_LIMIT); //一半
//油门补偿
tilted_fix = safe_div(1,LIMIT(reference_v.z,0.707f,1),0); //45度内补偿
//油门输出
thr_out = (thr_pid_out + tilted_fix *(thr_take_off) );
thr_out = LIMIT(thr_out,0,1000);
/////////////////////////////////////////////////////////////////////////////////
static float dT,dT2;
dT += T;
speed_cnt++;
if(speed_cnt>=10) //u8 20ms
{
exp_acc = PID_calculate( dT, //周期
exp_speed, //前馈
(set_speed + exp_speed), //期望值（设定值）
hc_value.fusion_speed, //反馈值
&h_speed_arg, //PID参数结构体
&h_speed_val, //PID数据结构体
500 *en //integration limit，积分限幅
); //输出
exp_acc = LIMIT(exp_acc,-3000,3000);
//integra_fix += (exp_speed - hc_value.m_speed) *dT;
//integra_fix = LIMIT(integra_fix,-1500 *en,1500 *en);
//LPF_1_(0.5f,dT,integra_fix,h_speed_val.err_i);
dT2 += dT;
height_cnt++;
if(height_cnt>=10) //200ms
{
/////////////////////////////////////
exp_speed = PID_calculate( dT2, //周期
0, //前馈
0, //期望值（设定值）
-set_height_e, //反馈值
&h_height_arg, //PID参数结构体
&h_height_val, //PID数据结构体
1500 *en //integration limit，积分限幅
); //输出
exp_speed = LIMIT(exp_speed,-300,300);
/////////////////////////////////////
dT2 = 0;
height_cnt = 0;
}
speed_cnt = 0;
dT = 0;
}
/////////////////////////////////////////////////////////////////////////////////
if(step==0)
{
step = 1;
}
if(en < 0.1f)
{
return (thr);
}
else
{
return (thr_out);
}
}
void Height_Ctrl(float T,float thr)
{
static float wz_speed_t;
static u8 height_ctrl_start_f;
static u16 hc_start_delay;
switch( height_ctrl_start_f )
{
case 0:
if( mpu6050.Acc.z > 4000 )
{
height_ctrl_start_f = 1;
if( ++hc_start_delay > 500 )
{
height_ctrl_start_f = 1;
}
}
break;
case 1:
wz_acc += ( 1 / ( 1 + 1 / ( 20 *3.14f *T ) ) ) *my_deathzoom( (reference_v.z *mpu6050.Acc.z + reference_v.x *mpu6050.Acc.x + reference_v.y *mpu6050.Acc.y - 4096 - wz_acc),100 );
wz_speed_t += ( 1 / ( 1 + 1 / ( 0.5f *3.14f *T ) ) ) *(0.4f*(thr-500) - wz_speed_t);
Moving_Average( (float)( baro_alt_speed *10),baro_speed_arr,BARO_SPEED_NUM,&baro_cnt ,&baro_speed ); //单位mm/s
// if( baro_alt_speed > 2000 )
// {
// while(1);
// }
if( height_ctrl_mode == 1)
{
//height_speed_ctrl(T,thr,0.8f*(thr-500),wz_speed_t);
height_speed_ctrl(T,thr,my_deathzoom( 1.6f *(thr-500), 50 ),baro_speed);
if(baro_ctrl_start==1)
{
baro_ctrl_start = 0;
Baro_Ctrl(0.02,thr);
}
}
else if( height_ctrl_mode == 2)
{
height_speed_ctrl(T,thr,0.4f*ultra_ctrl_out,ultra_speed);
if( ultra_start_f == 0 )
{
Ultra_Ctrl(0.1f,thr);//超声波周期100ms
ultra_start_f = -1;
}
}
////////////////////////////////////////////////////////////
if(height_ctrl_mode)
{
height_ctrl_out = wz_speed_pid_v.pid_out;
}
else
{
height_ctrl_out = thr;
}
break; //case 1
default: break;
} //switch
}
