int
pci_resource_setup_avail(dev_info_t *dip, pci_regspec_t *avail_p, int entries)
{
int i;
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_MEM) == NDI_FAILURE)
return (NDI_FAILURE);
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_IO) == NDI_FAILURE)
return (NDI_FAILURE);
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_PREFETCH_MEM) == NDI_FAILURE)
return (NDI_FAILURE);
/* for each entry in the PCI "available" property */
for (i = 0; i < entries; i++, avail_p++) {
if (avail_p->pci_phys_hi == -1u)
goto err;
switch (PCI_REG_ADDR_G(avail_p->pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM32): {
(void) ndi_ra_free(dip,
(uint64_t)avail_p->pci_phys_low,
(uint64_t)avail_p->pci_size_low,
(avail_p->pci_phys_hi &
PCI_REG_PF_M) ?
NDI_RA_TYPE_PCI_PREFETCH_MEM :
NDI_RA_TYPE_MEM,
0);
}
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
(void) ndi_ra_free(dip,
(uint64_t)avail_p->pci_phys_low,
(uint64_t)avail_p->pci_size_low,
NDI_RA_TYPE_IO,
0);
break;
default:
goto err;
}
}
#ifdef BUSRA_DEBUG
if (busra_debug) {
(void) ra_dump_all(NULL, dip);
}
#endif
return (NDI_SUCCESS);
err:
cmn_err(CE_WARN, "pci_resource_setup_avail: bad entry[%d]=%x\n",
i, avail_p->pci_phys_hi);
return (NDI_FAILURE);
}
int
_init(void)
{
int err = 0;
/*
* Create a resource map for the contigous memory allocated
* at start-of-day in startup.c
*/
if (ndi_ra_map_setup(ddi_root_node(), "gptwo-contigousmem")
== NDI_FAILURE) {
GPTWO_DEBUG0(1, CE_WARN,
"Can not setup resource map - gptwo-contigousmem\n");
return (1);
}
/*
* Put the allocated memory into the pool.
*/
(void) ndi_ra_free(ddi_root_node(), (uint64_t)efcode_vaddr,
(uint64_t)efcode_size, "gptwo-contigousmem", 0);
/* register devices with the configurator */
gptwocfg_register_ops(SAFPTYPE_sPCI, gptwo_configure_pci,
gptwo_unconfigure_pci);
gptwocfg_register_ops(SAFPTYPE_cPCI, gptwo_configure_pci,
gptwo_unconfigure_pci);
gptwocfg_register_ops(SAFPTYPE_PCIX, gptwo_configure_pci,
gptwo_unconfigure_pci);
if ((err = mod_install(&modlinkage)) != 0) {
GPTWO_DEBUG1(1, CE_WARN, "gptwo_pci (PCI Functions) "
"failed to load, error=%d\n", err);
gptwocfg_unregister_ops(SAFPTYPE_sPCI);
gptwocfg_unregister_ops(SAFPTYPE_cPCI);
gptwocfg_unregister_ops(SAFPTYPE_PCIX);
} else {
GPTWO_DEBUG0(1, CE_WARN, "gptwo_pci (PCI Functions) "
"has been loaded.\n");
}
return (err);
}
/*
* Setup resource map for the pci bus node based on the "available"
* property and "bus-range" property.
*/
int
pci_resource_setup(dev_info_t *dip)
{
pci_regspec_t *regs;
int rlen, rcount, i;
char bus_type[16] = "(unknown)";
int len;
struct busnum_ctrl ctrl;
int circular_count;
int rval = NDI_SUCCESS;
/*
* If this is a pci bus node then look for "available" property
* to find the available resources on this bus.
*/
len = sizeof (bus_type);
if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF,
DDI_PROP_CANSLEEP | DDI_PROP_DONTPASS, "device_type",
(caddr_t)&bus_type, &len) != DDI_SUCCESS)
return (NDI_FAILURE);
/* it is not a pci/pci-ex bus type */
if ((strcmp(bus_type, "pci") != 0) && (strcmp(bus_type, "pciex") != 0))
return (NDI_FAILURE);
/*
* The pci-hotplug project addresses adding the call
* to pci_resource_setup from pci nexus driver.
* However that project would initially be only for x86,
* so for sparc pcmcia-pci support we still need to call
* pci_resource_setup in pcic driver. Once all pci nexus drivers
* are updated to call pci_resource_setup this portion of the
* code would really become an assert to make sure this
* function is not called for the same dip twice.
*/
{
if (ra_map_exist(dip, NDI_RA_TYPE_MEM) == NDI_SUCCESS) {
return (NDI_FAILURE);
}
}
/*
* Create empty resource maps first.
*
* NOTE: If all the allocated resources are already assigned to
* device(s) in the hot plug slot then "available" property may not
* be present. But, subsequent hot plug operation may unconfigure
* the device in the slot and try to free up it's resources. So,
* at the minimum we should create empty maps here.
*/
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_MEM) == NDI_FAILURE) {
return (NDI_FAILURE);
}
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_IO) == NDI_FAILURE) {
return (NDI_FAILURE);
}
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_BUSNUM) == NDI_FAILURE) {
return (NDI_FAILURE);
}
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_PREFETCH_MEM) ==
NDI_FAILURE) {
return (NDI_FAILURE);
}
/* read the "available" property if it is available */
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"available", (caddr_t)®s, &rlen) == DDI_SUCCESS) {
/*
* create the available resource list for both memory and
* io space
*/
rcount = rlen / sizeof (pci_regspec_t);
for (i = 0; i < rcount; i++) {
switch (PCI_REG_ADDR_G(regs[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
(void) ndi_ra_free(dip,
(uint64_t)regs[i].pci_phys_low,
(uint64_t)regs[i].pci_size_low,
(regs[i].pci_phys_hi & PCI_REG_PF_M) ?
NDI_RA_TYPE_PCI_PREFETCH_MEM : NDI_RA_TYPE_MEM,
0);
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
(void) ndi_ra_free(dip,
((uint64_t)(regs[i].pci_phys_mid) << 32) |
((uint64_t)(regs[i].pci_phys_low)),
((uint64_t)(regs[i].pci_size_hi) << 32) |
((uint64_t)(regs[i].pci_size_low)),
(regs[i].pci_phys_hi & PCI_REG_PF_M) ?
NDI_RA_TYPE_PCI_PREFETCH_MEM : NDI_RA_TYPE_MEM,
0);
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
(void) ndi_ra_free(dip,
(uint64_t)regs[i].pci_phys_low,
(uint64_t)regs[i].pci_size_low,
NDI_RA_TYPE_IO,
0);
break;
case PCI_REG_ADDR_G(PCI_ADDR_CONFIG):
break;
default:
cmn_err(CE_WARN,
"pci_resource_setup: bad addr type: %x\n",
PCI_REG_ADDR_G(regs[i].pci_phys_hi));
break;
}
}
kmem_free((caddr_t)regs, rlen);
}
/*
* update resource map for available bus numbers if the node
* has available-bus-range or bus-range property.
*/
len = sizeof (struct bus_range);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"available-bus-range", (caddr_t)&pci_bus_range, &len) ==
DDI_SUCCESS) {
/*
* Add bus numbers in the range to the free list.
*/
(void) ndi_ra_free(dip, (uint64_t)pci_bus_range.lo,
(uint64_t)pci_bus_range.hi - (uint64_t)pci_bus_range.lo +
1, NDI_RA_TYPE_PCI_BUSNUM, 0);
} else {
/*
* We don't have an available-bus-range property. If, instead,
* we have a bus-range property we add all the bus numbers
* in that range to the free list but we must then scan
* for pci-pci bridges on this bus to find out the if there
* are any of those bus numbers already in use. If so, we can
* reclaim them.
*/
len = sizeof (struct bus_range);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip,
DDI_PROP_DONTPASS, "bus-range", (caddr_t)&pci_bus_range,
&len) == DDI_SUCCESS) {
if (pci_bus_range.lo != pci_bus_range.hi) {
/*
* Add bus numbers other than the secondary
* bus number to the free list.
*/
(void) ndi_ra_free(dip,
(uint64_t)pci_bus_range.lo + 1,
(uint64_t)pci_bus_range.hi -
(uint64_t)pci_bus_range.lo,
NDI_RA_TYPE_PCI_BUSNUM, 0);
/* scan for pci-pci bridges */
ctrl.rv = DDI_SUCCESS;
ctrl.dip = dip;
ctrl.range = &pci_bus_range;
ndi_devi_enter(dip, &circular_count);
ddi_walk_devs(ddi_get_child(dip),
claim_pci_busnum, (void *)&ctrl);
ndi_devi_exit(dip, circular_count);
if (ctrl.rv != DDI_SUCCESS) {
/* failed to create the map */
(void) ndi_ra_map_destroy(dip,
NDI_RA_TYPE_PCI_BUSNUM);
rval = NDI_FAILURE;
}
}
}
}
#ifdef BUSRA_DEBUG
if (busra_debug) {
(void) ra_dump_all(NULL, dip);
}
#endif
return (rval);
}
/*
* isa_resource_setup
* check for /used-resources and initialize
* based on info there. If no /used-resources,
* fail.
*/
int
isa_resource_setup()
{
dev_info_t *used, *usedpdip;
/*
* note that at this time bootconf creates 32 bit properties for
* io-space and device-memory
*/
struct iorange {
uint32_t base;
uint32_t len;
} *iorange;
struct memrange {
uint32_t base;
uint32_t len;
} *memrange;
uint32_t *irq;
int proplen;
int i, len;
int maxrange;
ndi_ra_request_t req;
uint64_t retbase;
uint64_t retlen;
used = ddi_find_devinfo("used-resources", -1, 0);
if (used == NULL) {
DEBUGPRT(CE_CONT,
"isa_resource_setup: used-resources not found");
return (NDI_FAILURE);
}
/*
* initialize to all resources being present
* and then remove the ones in use.
*/
usedpdip = ddi_root_node();
DEBUGPRT(CE_CONT, "isa_resource_setup: used = %p usedpdip = %p\n",
(void *)used, (void *)usedpdip);
if (ndi_ra_map_setup(usedpdip, NDI_RA_TYPE_IO) == NDI_FAILURE) {
return (NDI_FAILURE);
}
/* initialize io space, highest end base is 0xffff */
/* note that length is highest addr + 1 since starts from 0 */
(void) ndi_ra_free(usedpdip, 0, 0xffff + 1, NDI_RA_TYPE_IO, 0);
if (ddi_getlongprop(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS,
"io-space", (caddr_t)&iorange, &proplen) == DDI_SUCCESS) {
maxrange = proplen / sizeof (struct iorange);
/* remove the "used" I/O resources */
for (i = 0; i < maxrange; i++) {
bzero((caddr_t)&req, sizeof (req));
req.ra_addr = (uint64_t)iorange[i].base;
req.ra_len = (uint64_t)iorange[i].len;
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
(void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen,
NDI_RA_TYPE_IO, 0);
}
kmem_free((caddr_t)iorange, proplen);
}
if (ndi_ra_map_setup(usedpdip, NDI_RA_TYPE_MEM) == NDI_FAILURE) {
return (NDI_FAILURE);
}
/* initialize memory space where highest end base is 0xffffffff */
/* note that length is highest addr + 1 since starts from 0 */
(void) ndi_ra_free(usedpdip, 0, ((uint64_t)((uint32_t)~0)) + 1,
NDI_RA_TYPE_MEM, 0);
if (ddi_getlongprop(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS,
"device-memory", (caddr_t)&memrange, &proplen) == DDI_SUCCESS) {
maxrange = proplen / sizeof (struct memrange);
/* remove the "used" memory resources */
for (i = 0; i < maxrange; i++) {
bzero((caddr_t)&req, sizeof (req));
req.ra_addr = (uint64_t)memrange[i].base;
req.ra_len = (uint64_t)memrange[i].len;
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
(void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen,
NDI_RA_TYPE_MEM, 0);
}
kmem_free((caddr_t)memrange, proplen);
}
if (ndi_ra_map_setup(usedpdip, NDI_RA_TYPE_INTR) == NDI_FAILURE) {
return (NDI_FAILURE);
}
/* initialize the interrupt space */
(void) ndi_ra_free(usedpdip, 0, 16, NDI_RA_TYPE_INTR, 0);
#if defined(__i386) || defined(__amd64)
bzero(&req, sizeof (req));
req.ra_addr = 2; /* 2 == 9 so never allow */
req.ra_len = 1;
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
(void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen,
NDI_RA_TYPE_INTR, 0);
#endif
if (ddi_getlongprop(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS,
"interrupts", (caddr_t)&irq, &proplen) == DDI_SUCCESS) {
/* Initialize available interrupts by negating the used */
len = (proplen / sizeof (uint32_t));
for (i = 0; i < len; i++) {
bzero((caddr_t)&req, sizeof (req));
req.ra_addr = (uint64_t)irq[i];
req.ra_len = 1;
req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
(void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen,
NDI_RA_TYPE_INTR, 0);
}
kmem_free((caddr_t)irq, proplen);
}
#ifdef BUSRA_DEBUG
if (busra_debug) {
(void) ra_dump_all(NULL, usedpdip);
}
#endif
return (NDI_SUCCESS);
}
