int do_commandx(struct nft_handle *h, int argc, char *argv[], char **table,
		bool restore)
{
	struct iptables_command_state cs;
	int verbose = 0;
	const char *chain = NULL;
	const char *policy = NULL, *newname = NULL;
	unsigned int rulenum = 0, command = 0;
	int ret = 1;
	struct xtables_match *m;
	struct xtables_rule_match *matchp;
	struct xtables_target *t;
	struct xtables_args args = {
		.family	= h->family,
	};

	memset(&cs, 0, sizeof(cs));
	cs.jumpto = "";
	cs.argv = argv;

	/* re-set optind to 0 in case do_command4 gets called
	 * a second time */
	optind = 0;

	/* clear mflags in case do_command4 gets called a second time
	 * (we clear the global list of all matches for security)*/
	for (m = xtables_matches; m; m = m->next)
		m->mflags = 0;

	for (t = xtables_targets; t; t = t->next) {
		t->tflags = 0;
		t->used = 0;
	}

	/* Suppress error messages: we may add new options if we
	   demand-load a protocol. */
	opterr = 0;

	h->ops = nft_family_ops_lookup(h->family);
	if (h->ops == NULL)
		xtables_error(PARAMETER_PROBLEM, "Unknown family");

	opts = xt_params->orig_opts;
	while ((cs.c = getopt_long(argc, argv,
	   "-:A:C:D:R:I:L::S::M:F::Z::N:X::E:P:Vh::o:p:s:d:j:i:fbvnt:m:xc:g:46",
					   opts, NULL)) != -1) {
		switch (cs.c) {
			/*
			 * Command selection
			 */
		case 'A':
			add_command(&command, CMD_APPEND, CMD_NONE,
				    cs.invert);
			chain = optarg;
			break;

		case 'C':
			add_command(&command, CMD_CHECK, CMD_NONE,
				    cs.invert);
			chain = optarg;
			break;

		case 'D':
			add_command(&command, CMD_DELETE, CMD_NONE,
				    cs.invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!') {
				rulenum = parse_rulenumber(argv[optind++]);
				command = CMD_DELETE_NUM;
			}
			break;

		case 'R':
			add_command(&command, CMD_REPLACE, CMD_NONE,
				    cs.invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				rulenum = parse_rulenumber(argv[optind++]);
			else
				xtables_error(PARAMETER_PROBLEM,
					   "-%c requires a rule number",
					   cmd2char(CMD_REPLACE));
			break;

		case 'I':
			add_command(&command, CMD_INSERT, CMD_NONE,
				    cs.invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				rulenum = parse_rulenumber(argv[optind++]);
			else rulenum = 1;
			break;

		case 'L':
			add_command(&command, CMD_LIST,
				    CMD_ZERO | CMD_ZERO_NUM, cs.invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				rulenum = parse_rulenumber(argv[optind++]);
			break;

		case 'S':
			add_command(&command, CMD_LIST_RULES,
				    CMD_ZERO|CMD_ZERO_NUM, cs.invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				rulenum = parse_rulenumber(argv[optind++]);
			break;

		case 'F':
			add_command(&command, CMD_FLUSH, CMD_NONE,
				    cs.invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			break;

		case 'Z':
			add_command(&command, CMD_ZERO, CMD_LIST|CMD_LIST_RULES,
				    cs.invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				&& argv[optind][0] != '!')
				chain = argv[optind++];
			if (optind < argc && argv[optind][0] != '-'
				&& argv[optind][0] != '!') {
				rulenum = parse_rulenumber(argv[optind++]);
				command = CMD_ZERO_NUM;
			}
			break;

		case 'N':
			if (optarg && (*optarg == '-' || *optarg == '!'))
				xtables_error(PARAMETER_PROBLEM,
					   "chain name not allowed to start "
					   "with `%c'\n", *optarg);
			if (xtables_find_target(optarg, XTF_TRY_LOAD))
				xtables_error(PARAMETER_PROBLEM,
					   "chain name may not clash "
					   "with target name\n");
			add_command(&command, CMD_NEW_CHAIN, CMD_NONE,
				    cs.invert);
			chain = optarg;
			break;

		case 'X':
			add_command(&command, CMD_DELETE_CHAIN, CMD_NONE,
				    cs.invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			break;

		case 'E':
			add_command(&command, CMD_RENAME_CHAIN, CMD_NONE,
				    cs.invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				newname = argv[optind++];
			else
				xtables_error(PARAMETER_PROBLEM,
					   "-%c requires old-chain-name and "
					   "new-chain-name",
					    cmd2char(CMD_RENAME_CHAIN));
			break;

		case 'P':
			add_command(&command, CMD_SET_POLICY, CMD_NONE,
				    cs.invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				policy = argv[optind++];
			else
				xtables_error(PARAMETER_PROBLEM,
					   "-%c requires a chain and a policy",
					   cmd2char(CMD_SET_POLICY));
			break;

		case 'h':
			if (!optarg)
				optarg = argv[optind];

			/* iptables -p icmp -h */
			if (!cs.matches && cs.protocol)
				xtables_find_match(cs.protocol,
					XTF_TRY_LOAD, &cs.matches);

			exit_printhelp(cs.matches);

			/*
			 * Option selection
			 */
		case 'p':
			set_option(&cs.options, OPT_PROTOCOL, &args.invflags,
				   cs.invert);

			/* Canonicalize into lower case */
			for (cs.protocol = optarg; *cs.protocol; cs.protocol++)
				*cs.protocol = tolower(*cs.protocol);

			cs.protocol = optarg;
			args.proto = xtables_parse_protocol(cs.protocol);

			if (args.proto == 0 && (args.invflags & XT_INV_PROTO))
				xtables_error(PARAMETER_PROBLEM,
					   "rule would never match protocol");

			/* This needs to happen here to parse extensions */
			h->ops->proto_parse(&cs, &args);
			break;

		case 's':
			set_option(&cs.options, OPT_SOURCE, &args.invflags,
				   cs.invert);
			args.shostnetworkmask = optarg;
			break;

		case 'd':
			set_option(&cs.options, OPT_DESTINATION,
				   &args.invflags, cs.invert);
			args.dhostnetworkmask = optarg;
			break;

#ifdef IPT_F_GOTO
		case 'g':
			set_option(&cs.options, OPT_JUMP, &args.invflags,
				   cs.invert);
			args.goto_set = true;
			cs.jumpto = parse_target(optarg);
			break;
#endif

		case 'j':
			command_jump(&cs);
			break;


		case 'i':
			if (*optarg == '\0')
				xtables_error(PARAMETER_PROBLEM,
					"Empty interface is likely to be "
					"undesired");
			set_option(&cs.options, OPT_VIANAMEIN, &args.invflags,
				   cs.invert);
			xtables_parse_interface(optarg,
						args.iniface,
						args.iniface_mask);
			break;

		case 'o':
			if (*optarg == '\0')
				xtables_error(PARAMETER_PROBLEM,
					"Empty interface is likely to be "
					"undesired");
			set_option(&cs.options, OPT_VIANAMEOUT, &args.invflags,
				   cs.invert);
			xtables_parse_interface(optarg,
						args.outiface,
						args.outiface_mask);
			break;

		case 'f':
			if (args.family == AF_INET6) {
				xtables_error(PARAMETER_PROBLEM,
					"`-f' is not supported in IPv6, "
					"use -m frag instead");
			}
			set_option(&cs.options, OPT_FRAGMENT, &args.invflags,
				   cs.invert);
			args.flags |= IPT_F_FRAG;
			break;

		case 'v':
			if (!verbose)
				set_option(&cs.options, OPT_VERBOSE,
					   &args.invflags, cs.invert);
			verbose++;
			break;

		case 'm':
			command_match(&cs);
			break;

		case 'n':
			set_option(&cs.options, OPT_NUMERIC, &args.invflags,
				   cs.invert);
			break;

		case 't':
			if (cs.invert)
				xtables_error(PARAMETER_PROBLEM,
					   "unexpected ! flag before --table");
			*table = optarg;
			break;

		case 'x':
			set_option(&cs.options, OPT_EXPANDED, &args.invflags,
				   cs.invert);
			break;

		case 'V':
			if (cs.invert)
				printf("Not %s ;-)\n", prog_vers);
			else
				printf("%s v%s\n",
				       prog_name, prog_vers);
			exit(0);

		case 'w':
			if (restore) {
				xtables_error(PARAMETER_PROBLEM,
					      "You cannot use `-w' from "
					      "iptables-restore");
			}
			break;

		case '0':
			set_option(&cs.options, OPT_LINENUMBERS,
				   &args.invflags, cs.invert);
			break;

		case 'M':
			xtables_modprobe_program = optarg;
			break;

		case 'c':

			set_option(&cs.options, OPT_COUNTERS, &args.invflags,
				   cs.invert);
			args.pcnt = optarg;
			args.bcnt = strchr(args.pcnt + 1, ',');
			if (args.bcnt)
			    args.bcnt++;
			if (!args.bcnt && optind < argc &&
			    argv[optind][0] != '-' &&
			    argv[optind][0] != '!')
				args.bcnt = argv[optind++];
			if (!args.bcnt)
				xtables_error(PARAMETER_PROBLEM,
					"-%c requires packet and byte counter",
					opt2char(OPT_COUNTERS));

			if (sscanf(args.pcnt, "%llu", &args.pcnt_cnt) != 1)
				xtables_error(PARAMETER_PROBLEM,
					"-%c packet counter not numeric",
					opt2char(OPT_COUNTERS));

			if (sscanf(args.bcnt, "%llu", &args.bcnt_cnt) != 1)
				xtables_error(PARAMETER_PROBLEM,
					"-%c byte counter not numeric",
					opt2char(OPT_COUNTERS));
			break;

		case '4':
			if (args.family != AF_INET)
				exit_tryhelp(2);

			h->ops = nft_family_ops_lookup(args.family);
			break;

		case '6':
			args.family = AF_INET6;
			xtables_set_nfproto(AF_INET6);

			h->ops = nft_family_ops_lookup(args.family);
			if (h->ops == NULL)
				xtables_error(PARAMETER_PROBLEM,
					      "Unknown family");
			break;

		case 1: /* non option */
			if (optarg[0] == '!' && optarg[1] == '\0') {
				if (cs.invert)
					xtables_error(PARAMETER_PROBLEM,
						   "multiple consecutive ! not"
						   " allowed");
				cs.invert = TRUE;
				optarg[0] = '\0';
				continue;
			}
			fprintf(stderr, "Bad argument `%s'\n", optarg);
			exit_tryhelp(2);

		default:
			if (command_default(&cs, &xtables_globals) == 1)
				/* cf. ip6tables.c */
				continue;
			break;
		}
		cs.invert = FALSE;
	}

	if (strcmp(*table, "nat") == 0 &&
	    ((policy != NULL && strcmp(policy, "DROP") == 0) ||
	    (cs.jumpto != NULL && strcmp(cs.jumpto, "DROP") == 0)))
		xtables_error(PARAMETER_PROBLEM,
			"\nThe \"nat\" table is not intended for filtering, "
			"the use of DROP is therefore inhibited.\n\n");

	for (matchp = cs.matches; matchp; matchp = matchp->next)
		xtables_option_mfcall(matchp->match);
	if (cs.target != NULL)
		xtables_option_tfcall(cs.target);

	/* Fix me: must put inverse options checking here --MN */

	if (optind < argc)
		xtables_error(PARAMETER_PROBLEM,
			   "unknown arguments found on commandline");
	if (!command)
		xtables_error(PARAMETER_PROBLEM, "no command specified");
	if (cs.invert)
		xtables_error(PARAMETER_PROBLEM,
			   "nothing appropriate following !");

	/* Set only if required, needed by xtables-restore */
	if (h->family == AF_UNSPEC)
		h->family = args.family;

	h->ops->post_parse(command, &cs, &args);

	if (command == CMD_REPLACE &&
	    (args.s.naddrs != 1 || args.d.naddrs != 1))
		xtables_error(PARAMETER_PROBLEM, "Replacement rule does not "
			   "specify a unique address");

	generic_opt_check(command, cs.options);

	if (chain != NULL && strlen(chain) >= XT_EXTENSION_MAXNAMELEN)
		xtables_error(PARAMETER_PROBLEM,
			   "chain name `%s' too long (must be under %u chars)",
			   chain, XT_EXTENSION_MAXNAMELEN);

	if (command == CMD_APPEND
	    || command == CMD_DELETE
	    || command == CMD_CHECK
	    || command == CMD_INSERT
	    || command == CMD_REPLACE) {
		if (strcmp(chain, "PREROUTING") == 0
		    || strcmp(chain, "INPUT") == 0) {
			/* -o not valid with incoming packets. */
			if (cs.options & OPT_VIANAMEOUT)
				xtables_error(PARAMETER_PROBLEM,
					   "Can't use -%c with %s\n",
					   opt2char(OPT_VIANAMEOUT),
					   chain);
		}

		if (strcmp(chain, "POSTROUTING") == 0
		    || strcmp(chain, "OUTPUT") == 0) {
			/* -i not valid with outgoing packets */
			if (cs.options & OPT_VIANAMEIN)
				xtables_error(PARAMETER_PROBLEM,
					   "Can't use -%c with %s\n",
					   opt2char(OPT_VIANAMEIN),
					   chain);
		}

		/*
		 * Contrary to what iptables does, we assume that any jumpto
		 * is a custom chain jumps (if no target is found). Later on,
		 * nf_table will spot the error if the chain does not exists.
		 */
	}

	switch (command) {
	case CMD_APPEND:
		ret = add_entry(chain, *table, &cs, 0, h->family,
				args.s, args.d, cs.options&OPT_VERBOSE,
				h, true);
		break;
	case CMD_DELETE:
		ret = delete_entry(chain, *table, &cs, h->family,
				   args.s, args.d, cs.options&OPT_VERBOSE, h);
		break;
	case CMD_DELETE_NUM:
		ret = nft_rule_delete_num(h, chain, *table, rulenum - 1, verbose);
		break;
	case CMD_CHECK:
		ret = check_entry(chain, *table, &cs, h->family,
				   args.s, args.d, cs.options&OPT_VERBOSE, h);
		break;
	case CMD_REPLACE:
		ret = replace_entry(chain, *table, &cs, rulenum - 1,
				    h->family, args.s, args.d,
				    cs.options&OPT_VERBOSE, h);
		break;
	case CMD_INSERT:
		ret = add_entry(chain, *table, &cs, rulenum - 1, h->family,
				args.s, args.d, cs.options&OPT_VERBOSE, h,
				false);
		break;
	case CMD_FLUSH:
		ret = nft_rule_flush(h, chain, *table);
		break;
	case CMD_ZERO:
		ret = nft_chain_zero_counters(h, chain, *table);
		break;
	case CMD_ZERO_NUM:
		ret = nft_rule_zero_counters(h, chain, *table, rulenum - 1);
		break;
	case CMD_LIST:
	case CMD_LIST|CMD_ZERO:
	case CMD_LIST|CMD_ZERO_NUM:
		ret = list_entries(h, chain, *table,
				   rulenum,
				   cs.options&OPT_VERBOSE,
				   cs.options&OPT_NUMERIC,
				   cs.options&OPT_EXPANDED,
				   cs.options&OPT_LINENUMBERS);
		if (ret && (command & CMD_ZERO))
			ret = nft_chain_zero_counters(h, chain, *table);
		if (ret && (command & CMD_ZERO_NUM))
			ret = nft_rule_zero_counters(h, chain, *table,
						     rulenum - 1);
		break;
	case CMD_LIST_RULES:
	case CMD_LIST_RULES|CMD_ZERO:
	case CMD_LIST_RULES|CMD_ZERO_NUM:
		ret = list_rules(h, chain, *table, rulenum, cs.options&OPT_VERBOSE);
		if (ret && (command & CMD_ZERO))
			ret = nft_chain_zero_counters(h, chain, *table);
		if (ret && (command & CMD_ZERO_NUM))
			ret = nft_rule_zero_counters(h, chain, *table,
						     rulenum - 1);
		break;
	case CMD_NEW_CHAIN:
		ret = nft_chain_user_add(h, chain, *table);
		break;
	case CMD_DELETE_CHAIN:
		ret = nft_chain_user_del(h, chain, *table);
		break;
	case CMD_RENAME_CHAIN:
		ret = nft_chain_user_rename(h, chain, *table, newname);
		break;
	case CMD_SET_POLICY:
		ret = nft_chain_set(h, *table, chain, policy, NULL);
		if (ret < 0)
			xtables_error(PARAMETER_PROBLEM, "Wrong policy `%s'\n",
				      policy);
		break;
	default:
		/* We should never reach this... */
		exit_tryhelp(2);
	}

/*	if (verbose > 1)
		dump_entries(*handle); */

	xtables_rule_matches_free(&cs.matches);

	if (h->family == AF_INET) {
		free(args.s.addr.v4);
		free(args.s.mask.v4);
		free(args.d.addr.v4);
		free(args.d.mask.v4);
	} else if (h->family == AF_INET6) {
		free(args.s.addr.v6);
		free(args.s.mask.v6);
		free(args.d.addr.v6);
		free(args.d.mask.v6);
	}
	xtables_free_opts(1);

	return ret;
}
Exemplo n.º 2
0
/* We use exec_style instead of #ifdef's because ebtables.so is a shared object. */
int do_commandeb(struct nft_handle *h, int argc, char *argv[], char **table)
{
	char *buffer;
	int c, i;
	int zerochain = -1; /* Needed for the -Z option (we can have -Z <this> -L <that>) */
	int chcounter = 0; /* Needed for -C */
	int rule_nr = 0;
	int rule_nr_end = 0;
	int ret = 0;
	unsigned int flags = 0;
	struct xtables_target *t, *w;
	struct xtables_match *m;
	struct ebtables_command_state cs;
	char command = 'h';
	const char *chain = NULL;
	const char *policy = NULL;
	int exec_style = EXEC_STYLE_PRG;
	int selected_chain = -1;
	struct xtables_rule_match *xtrm_i;
	struct ebt_match *match;

	memset(&cs, 0, sizeof(cs));
	cs.argv = argv;

	if (nft_init(h, xtables_bridge) < 0)
		xtables_error(OTHER_PROBLEM,
			      "Could not initialize nftables layer.");

	h->ops = nft_family_ops_lookup(h->family);
	if (h->ops == NULL)
		xtables_error(PARAMETER_PROBLEM, "Unknown family");

	/* manually registering ebt matches, given the original ebtables parser
	 * don't use '-m matchname' and the match can't loaded dinamically when
	 * the user calls it.
	 */
	ebt_load_match_extensions();

	/* clear mflags in case do_commandeb gets called a second time
	 * (we clear the global list of all matches for security)*/
	for (m = xtables_matches; m; m = m->next)
		m->mflags = 0;

	for (t = xtables_targets; t; t = t->next) {
		t->tflags = 0;
		t->used = 0;
	}

	/* prevent getopt to spoil our error reporting */
	opterr = false;

	/* Getopt saves the day */
	while ((c = getopt_long(argc, argv,
	   "-A:D:C:I:N:E:X::L::Z::F::P:Vhi:o:j:c:p:s:d:t:M:", opts, NULL)) != -1) {
		cs.c = c;
		cs.invert = ebt_invert;
		switch (c) {

		case 'A': /* Add a rule */
		case 'D': /* Delete a rule */
		case 'C': /* Change counters */
		case 'P': /* Define policy */
		case 'I': /* Insert a rule */
		case 'N': /* Make a user defined chain */
		case 'E': /* Rename chain */
		case 'X': /* Delete chain */
			/* We allow -N chainname -P policy */
			/* XXX: Not in ebtables-compat */
			if (command == 'N' && c == 'P') {
				command = c;
				optind--; /* No table specified */
				goto handle_P;
			}
			if (OPT_COMMANDS)
				xtables_error(PARAMETER_PROBLEM,
					      "Multiple commands are not allowed");

			command = c;
			chain = optarg;
			selected_chain = get_current_chain(chain);
			flags |= OPT_COMMAND;
			/*if (!(replace->flags & OPT_KERNELDATA))
				ebt_get_kernel_table(replace, 0);*/
			/*if (optarg && (optarg[0] == '-' || !strcmp(optarg, "!")))
				ebt_print_error2("No chain name specified");*/
			if (c == 'N') {
				ret = nft_chain_user_add(h, chain, *table);
				break;
			} else if (c == 'X') {
				ret = nft_chain_user_del(h, chain, *table);
				break;
			}

			if (c == 'E') {
				if (optind >= argc)
					xtables_error(PARAMETER_PROBLEM, "No new chain name specified");
				else if (optind < argc - 1)
					xtables_error(PARAMETER_PROBLEM, "No extra options allowed with -E");
				else if (strlen(argv[optind]) >= NFT_CHAIN_MAXNAMELEN)
					xtables_error(PARAMETER_PROBLEM, "Chain name length can't exceed %d"" characters", NFT_CHAIN_MAXNAMELEN - 1);
				else if (strchr(argv[optind], ' ') != NULL)
					xtables_error(PARAMETER_PROBLEM, "Use of ' ' not allowed in chain names");

				ret = nft_chain_user_rename(h, chain, *table,
							    argv[optind]);
				if (ret != 0 && errno == ENOENT)
					xtables_error(PARAMETER_PROBLEM, "Chain '%s' doesn't exists", chain);

				optind++;
				break;
			} else if (c == 'D' && optind < argc && (argv[optind][0] != '-' || (argv[optind][1] >= '0' && argv[optind][1] <= '9'))) {
				if (optind != argc - 1)
					xtables_error(PARAMETER_PROBLEM,
							 "No extra options allowed with -D start_nr[:end_nr]");
				if (parse_rule_range(argv[optind], &rule_nr, &rule_nr_end))
					xtables_error(PARAMETER_PROBLEM,
							 "Problem with the specified rule number(s) '%s'", argv[optind]);
				optind++;
			} else if (c == 'C') {
				if ((chcounter = parse_change_counters_rule(argc, argv, &rule_nr, &rule_nr_end, exec_style, &cs)) == -1)
					return -1;
			} else if (c == 'I') {
				if (optind >= argc || (argv[optind][0] == '-' && (argv[optind][1] < '0' || argv[optind][1] > '9')))
					rule_nr = 1;
				else {
					rule_nr = parse_rule_number(argv[optind]);
					optind++;
				}
			} else if (c == 'P') {
handle_P:
				if (optind >= argc)
					xtables_error(PARAMETER_PROBLEM,
						      "No policy specified");
				for (i = 0; i < NUM_STANDARD_TARGETS; i++)
					if (!strcmp(argv[optind], nft_ebt_standard_target(i))) {
						policy = argv[optind];
						if (-i-1 == EBT_CONTINUE)
							xtables_error(PARAMETER_PROBLEM,
								      "Wrong policy '%s'",
								      argv[optind]);
						break;
					}
				if (i == NUM_STANDARD_TARGETS)
					xtables_error(PARAMETER_PROBLEM,
						      "Unknown policy '%s'", argv[optind]);
				optind++;
			}
			break;
		case 'L': /* List */
		case 'F': /* Flush */
		case 'Z': /* Zero counters */
			if (c == 'Z') {
				if ((flags & OPT_ZERO) || (flags & OPT_COMMAND && command != 'L'))
print_zero:
					xtables_error(PARAMETER_PROBLEM,
						      "Command -Z only allowed together with command -L");
				flags |= OPT_ZERO;
			} else {
				if (flags & OPT_COMMAND)
					xtables_error(PARAMETER_PROBLEM,
						      "Multiple commands are not allowed");
				command = c;
				flags |= OPT_COMMAND;
				if (flags & OPT_ZERO && c != 'L')
					goto print_zero;
			}

#ifdef SILENT_DAEMON
			if (c== 'L' && exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "-L not supported in daemon mode");
#endif

			/*if (!(replace->flags & OPT_KERNELDATA))
				ebt_get_kernel_table(replace, 0);
			i = -1;
			if (optind < argc && argv[optind][0] != '-') {
				if ((i = ebt_get_chainnr(replace, argv[optind])) == -1)
					ebt_print_error2("Chain '%s' doesn't exist", argv[optind]);
				optind++;
			}
			if (i != -1) {
				if (c == 'Z')
					zerochain = i;
				else
					replace->selected_chain = i;
			}*/
			break;
		case 'V': /* Version */
			if (OPT_COMMANDS)
				xtables_error(PARAMETER_PROBLEM,
					      "Multiple commands are not allowed");
			command = 'V';
			if (exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "%s %s\n", prog_name, prog_vers);
			printf("%s %s\n", prog_name, prog_vers);
			exit(0);
		case 'h': /* Help */
#ifdef SILENT_DAEMON
			if (exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "-h not supported in daemon mode");
#endif
			if (OPT_COMMANDS)
				xtables_error(PARAMETER_PROBLEM,
					      "Multiple commands are not allowed");
			command = 'h';

			/* All other arguments should be extension names */
			while (optind < argc) {
				/*struct ebt_u_match *m;
				struct ebt_u_watcher *w;*/

				if (!strcasecmp("list_extensions", argv[optind])) {
					ebt_list_extensions(xtables_targets, cs.matches);
					exit(0);
				}
				/*if ((m = ebt_find_match(argv[optind])))
					ebt_add_match(new_entry, m);
				else if ((w = ebt_find_watcher(argv[optind])))
					ebt_add_watcher(new_entry, w);
				else {*/
					if (!(t = xtables_find_target(argv[optind], XTF_TRY_LOAD)))
						xtables_error(PARAMETER_PROBLEM,"Extension '%s' not found", argv[optind]);
					if (flags & OPT_JUMP)
						xtables_error(PARAMETER_PROBLEM,"Sorry, you can only see help for one target extension at a time");
					flags |= OPT_JUMP;
					cs.target = t;
				//}
				optind++;
			}
			break;
		case 't': /* Table */
			if (OPT_COMMANDS)
				xtables_error(PARAMETER_PROBLEM,
					      "Please put the -t option first");
			ebt_check_option2(&flags, OPT_TABLE);
			if (strlen(optarg) > EBT_TABLE_MAXNAMELEN - 1)
				xtables_error(PARAMETER_PROBLEM,
					      "Table name length cannot exceed %d characters",
					      EBT_TABLE_MAXNAMELEN - 1);
			*table = optarg;
			break;
		case 'i': /* Input interface */
		case 2  : /* Logical input interface */
		case 'o': /* Output interface */
		case 3  : /* Logical output interface */
		case 'j': /* Target */
		case 'p': /* Net family protocol */
		case 's': /* Source mac */
		case 'd': /* Destination mac */
		case 'c': /* Set counters */
			if (!OPT_COMMANDS)
				xtables_error(PARAMETER_PROBLEM,
					      "No command specified");
			if (command != 'A' && command != 'D' && command != 'I' && command != 'C')
				xtables_error(PARAMETER_PROBLEM,
					      "Command and option do not match");
			if (c == 'i') {
				ebt_check_option2(&flags, OPT_IN);
				if (selected_chain > 2 && selected_chain < NF_BR_BROUTING)
					xtables_error(PARAMETER_PROBLEM,
						      "Use -i only in INPUT, FORWARD, PREROUTING and BROUTING chains");
				if (ebt_check_inverse2(optarg, argc, argv))
					cs.fw.invflags |= EBT_IIN;

				if (strlen(optarg) >= IFNAMSIZ)
big_iface_length:
					xtables_error(PARAMETER_PROBLEM,
						      "Interface name length cannot exceed %d characters",
						      IFNAMSIZ - 1);
				xtables_parse_interface(optarg, cs.fw.in, cs.fw.in_mask);
				break;
			} else if (c == 2) {
				ebt_check_option2(&flags, OPT_LOGICALIN);
				if (selected_chain > 2 && selected_chain < NF_BR_BROUTING)
					xtables_error(PARAMETER_PROBLEM,
						      "Use --logical-in only in INPUT, FORWARD, PREROUTING and BROUTING chains");
				if (ebt_check_inverse2(optarg, argc, argv))
					cs.fw.invflags |= EBT_ILOGICALIN;

				if (strlen(optarg) >= IFNAMSIZ)
					goto big_iface_length;
				strcpy(cs.fw.logical_in, optarg);
				if (parse_iface(cs.fw.logical_in, "--logical-in"))
					return -1;
				break;
			} else if (c == 'o') {
				ebt_check_option2(&flags, OPT_OUT);
				if (selected_chain < 2 || selected_chain == NF_BR_BROUTING)
					xtables_error(PARAMETER_PROBLEM,
						      "Use -o only in OUTPUT, FORWARD and POSTROUTING chains");
				if (ebt_check_inverse2(optarg, argc, argv))
					cs.fw.invflags |= EBT_IOUT;

				if (strlen(optarg) >= IFNAMSIZ)
					goto big_iface_length;

				xtables_parse_interface(optarg, cs.fw.out, cs.fw.out_mask);
				break;
			} else if (c == 3) {
				ebt_check_option2(&flags, OPT_LOGICALOUT);
				if (selected_chain < 2 || selected_chain == NF_BR_BROUTING)
					xtables_error(PARAMETER_PROBLEM,
						      "Use --logical-out only in OUTPUT, FORWARD and POSTROUTING chains");
				if (ebt_check_inverse2(optarg, argc, argv))
					cs.fw.invflags |= EBT_ILOGICALOUT;

				if (strlen(optarg) >= IFNAMSIZ)
					goto big_iface_length;
				strcpy(cs.fw.logical_out, optarg);
				if (parse_iface(cs.fw.logical_out, "--logical-out"))
					return -1;
				break;
			} else if (c == 'j') {
				ebt_check_option2(&flags, OPT_JUMP);
				cs.jumpto = parse_target(optarg);
				cs.target = command_jump(&cs, cs.jumpto);
				break;
			} else if (c == 's') {
				ebt_check_option2(&flags, OPT_SOURCE);
				if (ebt_check_inverse2(optarg, argc, argv))
					cs.fw.invflags |= EBT_ISOURCE;

				if (ebt_get_mac_and_mask(optarg, cs.fw.sourcemac, cs.fw.sourcemsk))
					xtables_error(PARAMETER_PROBLEM, "Problem with specified source mac '%s'", optarg);
				cs.fw.bitmask |= EBT_SOURCEMAC;
				break;
			} else if (c == 'd') {
				ebt_check_option2(&flags, OPT_DEST);
				if (ebt_check_inverse2(optarg, argc, argv))
					cs.fw.invflags |= EBT_IDEST;

				if (ebt_get_mac_and_mask(optarg, cs.fw.destmac, cs.fw.destmsk))
					xtables_error(PARAMETER_PROBLEM, "Problem with specified destination mac '%s'", optarg);
				cs.fw.bitmask |= EBT_DESTMAC;
				break;
			} else if (c == 'c') {
				ebt_check_option2(&flags, OPT_COUNT);
				if (ebt_check_inverse2(optarg, argc, argv))
					xtables_error(PARAMETER_PROBLEM,
						      "Unexpected '!' after -c");
				if (optind >= argc || optarg[0] == '-' || argv[optind][0] == '-')
					xtables_error(PARAMETER_PROBLEM,
						      "Option -c needs 2 arguments");

				cs.counters.pcnt = strtoull(optarg, &buffer, 10);
				if (*buffer != '\0')
					xtables_error(PARAMETER_PROBLEM,
						      "Packet counter '%s' invalid",
						      optarg);
				cs.counters.bcnt = strtoull(argv[optind], &buffer, 10);
				if (*buffer != '\0')
					xtables_error(PARAMETER_PROBLEM,
						      "Packet counter '%s' invalid",
						      argv[optind]);
				optind++;
				break;
			}
			ebt_check_option2(&flags, OPT_PROTOCOL);
			if (ebt_check_inverse2(optarg, argc, argv))
				cs.fw.invflags |= EBT_IPROTO;

			cs.fw.bitmask &= ~((unsigned int)EBT_NOPROTO);
			i = strtol(optarg, &buffer, 16);
			if (*buffer == '\0' && (i < 0 || i > 0xFFFF))
				xtables_error(PARAMETER_PROBLEM,
					      "Problem with the specified protocol");
			if (*buffer != '\0') {
				struct ethertypeent *ent;

				if (!strcasecmp(optarg, "LENGTH")) {
					cs.fw.bitmask |= EBT_802_3;
					break;
				}
				ent = getethertypebyname(optarg);
				if (!ent)
					xtables_error(PARAMETER_PROBLEM,
						      "Problem with the specified Ethernet protocol '%s', perhaps "_PATH_ETHERTYPES " is missing", optarg);
				cs.fw.ethproto = ent->e_ethertype;
			} else
				cs.fw.ethproto = i;

			if (cs.fw.ethproto < 0x0600)
				xtables_error(PARAMETER_PROBLEM,
					      "Sorry, protocols have values above or equal to 0x0600");
			break;
		case 4  : /* Lc */
#ifdef SILENT_DAEMON
			if (exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "--Lc is not supported in daemon mode");
#endif
			ebt_check_option2(&flags, LIST_C);
			if (command != 'L')
				xtables_error(PARAMETER_PROBLEM,
					      "Use --Lc with -L");
			flags |= LIST_C;
			break;
		case 5  : /* Ln */
#ifdef SILENT_DAEMON
			if (exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "--Ln is not supported in daemon mode");
#endif
			ebt_check_option2(&flags, LIST_N);
			if (command != 'L')
				xtables_error(PARAMETER_PROBLEM,
					      "Use --Ln with -L");
			if (flags & LIST_X)
				xtables_error(PARAMETER_PROBLEM,
					      "--Lx is not compatible with --Ln");
			flags |= LIST_N;
			break;
		case 6  : /* Lx */
#ifdef SILENT_DAEMON
			if (exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "--Lx is not supported in daemon mode");
#endif
			ebt_check_option2(&flags, LIST_X);
			if (command != 'L')
				xtables_error(PARAMETER_PROBLEM,
					      "Use --Lx with -L");
			if (flags & LIST_N)
				xtables_error(PARAMETER_PROBLEM,
					      "--Lx is not compatible with --Ln");
			flags |= LIST_X;
			break;
		case 12 : /* Lmac2 */
#ifdef SILENT_DAEMON
			if (exec_style == EXEC_STYLE_DAEMON)
				xtables_error(PARAMETER_PROBLEM,
					      "--Lmac2 is not supported in daemon mode");
#endif
			ebt_check_option2(&flags, LIST_MAC2);
			if (command != 'L')
				xtables_error(PARAMETER_PROBLEM,
					       "Use --Lmac2 with -L");
			flags |= LIST_MAC2;
			break;
		case 8 : /* atomic-commit */
/*			if (exec_style == EXEC_STYLE_DAEMON)
				ebt_print_error2("--atomic-commit is not supported in daemon mode");
			replace->command = c;
			if (OPT_COMMANDS)
				ebt_print_error2("Multiple commands are not allowed");
			replace->flags |= OPT_COMMAND;
			if (!replace->filename)
				ebt_print_error2("No atomic file specified");*/
			/* Get the information from the file */
			/*ebt_get_table(replace, 0);*/
			/* We don't want the kernel giving us its counters,
			 * they would overwrite the counters extracted from
			 * the file */
			/*replace->num_counters = 0;*/
			/* Make sure the table will be written to the kernel */
			/*free(replace->filename);
			replace->filename = NULL;
			break;*/
		/*case 7 :*/ /* atomic-init */
		/*case 10:*/ /* atomic-save */
		/*case 11:*/ /* init-table */
		/*	if (exec_style == EXEC_STYLE_DAEMON) {
				if (c == 7) {
					ebt_print_error2("--atomic-init is not supported in daemon mode");
				} else if (c == 10)
					ebt_print_error2("--atomic-save is not supported in daemon mode");
				ebt_print_error2("--init-table is not supported in daemon mode");
			}
			replace->command = c;
			if (OPT_COMMANDS)
				ebt_print_error2("Multiple commands are not allowed");
			if (c != 11 && !replace->filename)
				ebt_print_error2("No atomic file specified");
			replace->flags |= OPT_COMMAND;
			{
				char *tmp = replace->filename;*/

				/* Get the kernel table */
				/*replace->filename = NULL;
				ebt_get_kernel_table(replace, c == 10 ? 0 : 1);
				replace->filename = tmp;
			}
			break;
		case 9 :*/ /* atomic */
			/*if (exec_style == EXEC_STYLE_DAEMON)
				ebt_print_error2("--atomic is not supported in daemon mode");
			if (OPT_COMMANDS)
				ebt_print_error2("--atomic has to come before the command");*/
			/* A possible memory leak here, but this is not
			 * executed in daemon mode */
			/*replace->filename = (char *)malloc(strlen(optarg) + 1);
			strcpy(replace->filename, optarg);
			break;
		case 13 : *//* concurrent */
			/*signal(SIGINT, sighandler);
			signal(SIGTERM, sighandler);
			use_lockfd = 1;
			break;*/
		case 1 :
			if (!strcmp(optarg, "!"))
				ebt_check_inverse2(optarg, argc, argv);
			else
				xtables_error(PARAMETER_PROBLEM,
					      "Bad argument : '%s'", optarg);
			/* ebt_ebt_check_inverse2() did optind++ */
			optind--;
			continue;
		default:
			/* Is it a target option? */
			if (cs.target != NULL && cs.target->parse != NULL) {
				int opt_offset = cs.target->option_offset;
				if (cs.target->parse(c - opt_offset,
						     argv, ebt_invert,
						     &cs.target->tflags,
						     NULL, &cs.target->t))
					goto check_extension;
			}

			/* Is it a match_option? */
			for (m = xtables_matches; m; m = m->next) {
				if (m->parse(c - m->option_offset, argv, ebt_invert, &m->mflags, NULL, &m->m)) {
					ebt_add_match(m, &cs);
					goto check_extension;
				}
			}

			/* Is it a watcher option? */
			for (w = xtables_targets; w; w = w->next) {
				if (w->parse(c - w->option_offset, argv,
					     ebt_invert, &w->tflags,
					     NULL, &w->t)) {
					ebt_add_watcher(w, &cs);
					goto check_extension;
				}
			}
			/*
			if (w == NULL && c == '?')
				ebt_print_error2("Unknown argument: '%s'", argv[optind - 1], (char)optopt, (char)c);
			else if (w == NULL) {
				if (!strcmp(t->name, "standard"))
					ebt_print_error2("Unknown argument: don't forget the -t option");
				else
					ebt_print_error2("Target-specific option does not correspond with specified target");
			}
			if (ebt_errormsg[0] != '\0')
				return -1;
			if (w->used == 0) {
				ebt_add_watcher(new_entry, w);
				w->used = 1;
			}*/
check_extension:
			if (command != 'A' && command != 'I' &&
			    command != 'D' && command != 'C')
				xtables_error(PARAMETER_PROBLEM,
					      "Extensions only for -A, -I, -D and -C");
		}
		ebt_invert = 0;
	}

	/* Just in case we didn't catch an error */
	/*if (ebt_errormsg[0] != '\0')
		return -1;

	if (!(table = ebt_find_table(replace->name)))
		ebt_print_error2("Bad table name");*/

	if (command == 'h' && !(flags & OPT_ZERO)) {
		print_help(cs.target, cs.matches, *table);
		if (exec_style == EXEC_STYLE_PRG)
			exit(0);
	}

	/* Do the final checks */
	if (command == 'A' || command == 'I' ||
	    command == 'D' || command == 'C') {
		for (xtrm_i = cs.matches; xtrm_i; xtrm_i = xtrm_i->next)
			xtables_option_mfcall(xtrm_i->match);

		for (match = cs.match_list; match; match = match->next) {
			if (match->ismatch)
				continue;

			xtables_option_tfcall(match->u.watcher);
		}

		if (cs.target != NULL)
			xtables_option_tfcall(cs.target);
	}
	/* So, the extensions can work with the host endian.
	 * The kernel does not have to do this of course */
	cs.fw.ethproto = htons(cs.fw.ethproto);

	if (command == 'P') {
		if (selected_chain < 0) {
			xtables_error(PARAMETER_PROBLEM,
				      "Policy %s not allowed for user defined chains",
				      policy);
		}
		if (strcmp(policy, "RETURN") == 0) {
			xtables_error(PARAMETER_PROBLEM,
				      "Policy RETURN only allowed for user defined chains");
		}
		ret = nft_chain_set(h, *table, chain, policy, NULL);
		if (ret < 0)
			xtables_error(PARAMETER_PROBLEM, "Wrong policy");
	} else if (command == 'L') {
		ret = list_rules(h, chain, *table, rule_nr,
				 flags&OPT_VERBOSE,
				 flags&OPT_NUMERIC,
				 /*flags&OPT_EXPANDED*/0,
				 flags&LIST_N,
				 flags&LIST_C);
		if (!(flags & OPT_ZERO) && exec_style == EXEC_STYLE_PRG)
			exit(0);
	}
	if (flags & OPT_ZERO) {
		selected_chain = zerochain;
		ret = nft_chain_zero_counters(h, chain, *table);
	} else if (command == 'F') {
		ret = nft_rule_flush(h, chain, *table);
	} else if (command == 'A') {
		ret = append_entry(h, chain, *table, &cs, 0,
				   flags&OPT_VERBOSE, true);
	} else if (command == 'I') {
		ret = append_entry(h, chain, *table, &cs, rule_nr - 1,
				   flags&OPT_VERBOSE, false);
	} else if (command == 'D') {
		ret = delete_entry(h, chain, *table, &cs, rule_nr - 1,
				   rule_nr_end, flags&OPT_VERBOSE);
	} /*else if (replace->command == 'C') {
		ebt_change_counters(replace, new_entry, rule_nr, rule_nr_end, &(new_entry->cnt_surplus), chcounter);
		if (ebt_errormsg[0] != '\0')
			return -1;
	}*/
	/* Commands -N, -E, -X, --atomic-commit, --atomic-commit, --atomic-save,
	 * --init-table fall through */

	/*if (ebt_errormsg[0] != '\0')
		return -1;
	if (table->check)
		table->check(replace);

	if (exec_style == EXEC_STYLE_PRG) {*//* Implies ebt_errormsg[0] == '\0' */
		/*ebt_deliver_table(replace);

		if (replace->nentries)
			ebt_deliver_counters(replace);*/

	ebt_cs_clean(&cs);
	return ret;
}
Exemplo n.º 3
0
int do_commandarp(struct nft_handle *h, int argc, char *argv[], char **table)
{
	struct arptables_command_state cs;
	int invert = 0;
	unsigned int nsaddrs = 0, ndaddrs = 0;
	struct in_addr *saddrs = NULL, *daddrs = NULL;

	int c, verbose = 0;
	const char *chain = NULL;
	const char *shostnetworkmask = NULL, *dhostnetworkmask = NULL;
	const char *policy = NULL, *newname = NULL;
	unsigned int rulenum = 0, options = 0, command = 0;
	const char *pcnt = NULL, *bcnt = NULL;
	int ret = 1;
	struct xtables_target *t;

	memset(&cs, 0, sizeof(cs));
	cs.jumpto = "";

	opts = original_opts;
	global_option_offset = 0;

	xtables_globals.orig_opts = original_opts;

	/* re-set optind to 0 in case do_command gets called
	 * a second time */
	optind = 0;

	for (t = xtables_targets; t; t = t->next) {
		t->tflags = 0;
		t->used = 0;
	}

	/* Suppress error messages: we may add new options if we
	    demand-load a protocol. */
	opterr = 0;

	while ((c = getopt_long(argc, argv,
	   "-A:D:R:I:L::M:F::Z::N:X::E:P:Vh::o:p:s:d:j:l:i:vnt:m:c:",
					   opts, NULL)) != -1) {
		switch (c) {
			/*
			 * Command selection
			 */
		case 'A':
			add_command(&command, CMD_APPEND, CMD_NONE,
				    invert);
			chain = optarg;
			break;

		case 'D':
			add_command(&command, CMD_DELETE, CMD_NONE,
				    invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!') {
				rulenum = parse_rulenumber(argv[optind++]);
				command = CMD_DELETE_NUM;
			}
			break;

		case 'R':
			add_command(&command, CMD_REPLACE, CMD_NONE,
				    invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				rulenum = parse_rulenumber(argv[optind++]);
			else
				xtables_error(PARAMETER_PROBLEM,
					      "-%c requires a rule number",
					      cmd2char(CMD_REPLACE));
			break;

		case 'I':
			add_command(&command, CMD_INSERT, CMD_NONE,
				    invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				rulenum = parse_rulenumber(argv[optind++]);
			else rulenum = 1;
			break;

		case 'L':
			add_command(&command, CMD_LIST, CMD_ZERO,
				    invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			break;

		case 'F':
			add_command(&command, CMD_FLUSH, CMD_NONE,
				    invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			break;

		case 'Z':
			add_command(&command, CMD_ZERO, CMD_LIST,
				    invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				&& argv[optind][0] != '!')
				chain = argv[optind++];
			break;

		case 'N':
			if (optarg && *optarg == '-')
				xtables_error(PARAMETER_PROBLEM,
					      "chain name not allowed to start "
					      "with `-'\n");
			if (xtables_find_target(optarg, XTF_TRY_LOAD))
				xtables_error(PARAMETER_PROBLEM,
						"chain name may not clash "
						"with target name\n");
			add_command(&command, CMD_NEW_CHAIN, CMD_NONE,
				    invert);
			chain = optarg;
			break;

		case 'X':
			add_command(&command, CMD_DELETE_CHAIN, CMD_NONE,
				    invert);
			if (optarg) chain = optarg;
			else if (optind < argc && argv[optind][0] != '-'
				 && argv[optind][0] != '!')
				chain = argv[optind++];
			break;

		case 'E':
			add_command(&command, CMD_RENAME_CHAIN, CMD_NONE,
				    invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				newname = argv[optind++];
			else
				xtables_error(PARAMETER_PROBLEM,
					      "-%c requires old-chain-name and "
					      "new-chain-name",
					      cmd2char(CMD_RENAME_CHAIN));
			break;

		case 'P':
			add_command(&command, CMD_SET_POLICY, CMD_NONE,
				    invert);
			chain = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				policy = argv[optind++];
			else
				xtables_error(PARAMETER_PROBLEM,
					      "-%c requires a chain and a policy",
					      cmd2char(CMD_SET_POLICY));
			break;

		case 'h':
			if (!optarg)
				optarg = argv[optind];

			exit_printhelp();
			break;
		case 's':
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_S_IP, &cs.fw.arp.invflags,
				   invert);
			shostnetworkmask = argv[optind-1];
			break;

		case 'd':
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_D_IP, &cs.fw.arp.invflags,
				   invert);
			dhostnetworkmask = argv[optind-1];
			break;

		case 2:/* src-mac */
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_S_MAC, &cs.fw.arp.invflags,
				   invert);
			if (getmac_and_mask(argv[optind - 1],
			    cs.fw.arp.src_devaddr.addr, cs.fw.arp.src_devaddr.mask))
				xtables_error(PARAMETER_PROBLEM, "Problem with specified "
						"source mac");
			break;

		case 3:/* dst-mac */
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_D_MAC, &cs.fw.arp.invflags,
				   invert);

			if (getmac_and_mask(argv[optind - 1],
			    cs.fw.arp.tgt_devaddr.addr, cs.fw.arp.tgt_devaddr.mask))
				xtables_error(PARAMETER_PROBLEM, "Problem with specified "
						"destination mac");
			break;

		case 'l':/* hardware length */
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_H_LENGTH, &cs.fw.arp.invflags,
				   invert);
			getlength_and_mask(argv[optind - 1], &cs.fw.arp.arhln,
					   &cs.fw.arp.arhln_mask);

			if (cs.fw.arp.arhln != 6) {
				xtables_error(PARAMETER_PROBLEM,
					      "Only harware address length of"
					      " 6 is supported currently.");
			}

			break;

		case 8:/* protocol length */
			xtables_error(PARAMETER_PROBLEM, "not supported");
/*
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_P_LENGTH, &cs.fw.arp.invflags,
				   invert);

			getlength_and_mask(argv[optind - 1], &cs.fw.arp.arpln,
					   &cs.fw.arp.arpln_mask);
			break;
*/

		case 4:/* opcode */
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_OPCODE, &cs.fw.arp.invflags,
				   invert);
			if (get16_and_mask(argv[optind - 1], &cs.fw.arp.arpop,
					   &cs.fw.arp.arpop_mask, 10)) {
				int i;

				for (i = 0; i < NUMOPCODES; i++)
					if (!strcasecmp(opcodes[i], optarg))
						break;
				if (i == NUMOPCODES)
					xtables_error(PARAMETER_PROBLEM, "Problem with specified opcode");
				cs.fw.arp.arpop = htons(i+1);
			}
			break;

		case 5:/* h-type */
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_H_TYPE, &cs.fw.arp.invflags,
				   invert);
			if (get16_and_mask(argv[optind - 1], &cs.fw.arp.arhrd,
					   &cs.fw.arp.arhrd_mask, 16)) {
				if (strcasecmp(argv[optind-1], "Ethernet"))
					xtables_error(PARAMETER_PROBLEM, "Problem with specified hardware type");
				cs.fw.arp.arhrd = htons(1);
			}
			break;

		case 6:/* proto-type */
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_P_TYPE, &cs.fw.arp.invflags,
				   invert);
			if (get16_and_mask(argv[optind - 1], &cs.fw.arp.arpro,
					   &cs.fw.arp.arpro_mask, 0)) {
				if (strcasecmp(argv[optind-1], "ipv4"))
					xtables_error(PARAMETER_PROBLEM, "Problem with specified protocol type");
				cs.fw.arp.arpro = htons(0x800);
			}
			break;

		case 'j':
			set_option(&options, OPT_JUMP, &cs.fw.arp.invflags,
				   invert);
			cs.jumpto = parse_target(optarg);
			cs.target = command_jump(&cs.fw, cs.jumpto);
			break;

		case 'i':
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_VIANAMEIN, &cs.fw.arp.invflags,
				   invert);
			parse_interface(argv[optind-1],
					cs.fw.arp.iniface,
					cs.fw.arp.iniface_mask);
/*			cs.fw.nfcache |= NFC_IP_IF_IN; */
			break;

		case 'o':
			check_inverse(optarg, &invert, &optind, argc);
			set_option(&options, OPT_VIANAMEOUT, &cs.fw.arp.invflags,
				   invert);
			parse_interface(argv[optind-1],
					cs.fw.arp.outiface,
					cs.fw.arp.outiface_mask);
			/* cs.fw.nfcache |= NFC_IP_IF_OUT; */
			break;

		case 'v':
			if (!verbose)
				set_option(&options, OPT_VERBOSE,
					   &cs.fw.arp.invflags, invert);
			verbose++;
			break;

		case 'm': /*{
			size_t size;

			if (invert)
				exit_error(PARAMETER_PROBLEM,
					   "unexpected ! flag before --match");

			m = find_match(optarg, LOAD_MUST_SUCCEED);
			size = ARPT_ALIGN(sizeof(struct arpt_entry_match))
					 + m->size;
			m->m = fw_calloc(1, size);
			m->m->u.match_size = size;
			strcpy(m->m->u.user.name, m->name);
			m->init(m->m, &fw.nfcache);
			opts = merge_options(opts, m->extra_opts, &m->option_offset);
		}*/
		break;

		case 'n':
			set_option(&options, OPT_NUMERIC, &cs.fw.arp.invflags,
				   invert);
			break;

		case 't':
			if (invert)
				xtables_error(PARAMETER_PROBLEM,
					      "unexpected ! flag before --table");
			*table = argv[optind-1];
			break;

		case 'V':
			if (invert)
				printf("Not %s ;-)\n", program_version);
			else
				printf("%s v%s\n",
				       program_name, program_version);
			exit(0);

		case '0':
			set_option(&options, OPT_LINENUMBERS, &cs.fw.arp.invflags,
				   invert);
			break;

		case 'M':
			//modprobe = optarg;
			break;

		case 'c':

			set_option(&options, OPT_COUNTERS, &cs.fw.arp.invflags,
				   invert);
			pcnt = optarg;
			if (optind < argc && argv[optind][0] != '-'
			    && argv[optind][0] != '!')
				bcnt = argv[optind++];
			else
				xtables_error(PARAMETER_PROBLEM,
					      "-%c requires packet and byte counter",
					      opt2char(OPT_COUNTERS));

			if (sscanf(pcnt, "%llu", &cs.fw.counters.pcnt) != 1)
			xtables_error(PARAMETER_PROBLEM,
				"-%c packet counter not numeric",
				opt2char(OPT_COUNTERS));

			if (sscanf(bcnt, "%llu", &cs.fw.counters.bcnt) != 1)
				xtables_error(PARAMETER_PROBLEM,
					      "-%c byte counter not numeric",
					      opt2char(OPT_COUNTERS));

			break;


		case 1: /* non option */
			if (optarg[0] == '!' && optarg[1] == '\0') {
				if (invert)
					xtables_error(PARAMETER_PROBLEM,
						      "multiple consecutive ! not"
						      " allowed");
				invert = TRUE;
				optarg[0] = '\0';
				continue;
			}
			printf("Bad argument `%s'\n", optarg);
			exit_tryhelp(2);

		default:
			if (cs.target) {
				xtables_option_tpcall(c, argv,
						      invert, cs.target, &cs.fw);
			}
			break;
		}
		invert = FALSE;
	}

	if (cs.target)
		xtables_option_tfcall(cs.target);

	if (optind < argc)
		xtables_error(PARAMETER_PROBLEM,
			      "unknown arguments found on commandline");
	if (!command)
		xtables_error(PARAMETER_PROBLEM, "no command specified");
	if (invert)
		xtables_error(PARAMETER_PROBLEM,
			      "nothing appropriate following !");

	if (command & (CMD_REPLACE | CMD_INSERT | CMD_DELETE | CMD_APPEND)) {
		if (!(options & OPT_D_IP))
			dhostnetworkmask = "0.0.0.0/0";
		if (!(options & OPT_S_IP))
			shostnetworkmask = "0.0.0.0/0";
	}

	if (shostnetworkmask)
		parse_hostnetworkmask(shostnetworkmask, &saddrs,
				      &(cs.fw.arp.smsk), &nsaddrs);

	if (dhostnetworkmask)
		parse_hostnetworkmask(dhostnetworkmask, &daddrs,
				      &(cs.fw.arp.tmsk), &ndaddrs);

	if ((nsaddrs > 1 || ndaddrs > 1) &&
	    (cs.fw.arp.invflags & (ARPT_INV_SRCIP | ARPT_INV_TGTIP)))
		xtables_error(PARAMETER_PROBLEM, "! not allowed with multiple"
				" source or destination IP addresses");

	if (command == CMD_REPLACE && (nsaddrs != 1 || ndaddrs != 1))
		xtables_error(PARAMETER_PROBLEM, "Replacement rule does not "
						 "specify a unique address");

	generic_opt_check(command, options);

	if (chain && strlen(chain) > ARPT_FUNCTION_MAXNAMELEN)
		xtables_error(PARAMETER_PROBLEM,
				"chain name `%s' too long (must be under %i chars)",
				chain, ARPT_FUNCTION_MAXNAMELEN);

	if (nft_init(h, xtables_arp) < 0)
		xtables_error(OTHER_PROBLEM,
			      "Could not initialize nftables layer.");

	h->ops = nft_family_ops_lookup(h->family);
	if (h->ops == NULL)
		xtables_error(PARAMETER_PROBLEM, "Unknown family");

	if (command == CMD_APPEND
	    || command == CMD_DELETE
	    || command == CMD_INSERT
	    || command == CMD_REPLACE) {
		if (strcmp(chain, "PREROUTING") == 0
		    || strcmp(chain, "INPUT") == 0) {
			/* -o not valid with incoming packets. */
			if (options & OPT_VIANAMEOUT)
				xtables_error(PARAMETER_PROBLEM,
					      "Can't use -%c with %s\n",
					      opt2char(OPT_VIANAMEOUT),
					      chain);
		}

		if (strcmp(chain, "POSTROUTING") == 0
		    || strcmp(chain, "OUTPUT") == 0) {
			/* -i not valid with outgoing packets */
			if (options & OPT_VIANAMEIN)
				xtables_error(PARAMETER_PROBLEM,
						"Can't use -%c with %s\n",
						opt2char(OPT_VIANAMEIN),
						chain);
		}

		if (!cs.target && strlen(cs.jumpto) != 0) {
			size_t size;

			cs.target = xtables_find_target(XT_STANDARD_TARGET,
							XTF_LOAD_MUST_SUCCEED);
			size = sizeof(struct arpt_entry_target) + cs.target->size;
			cs.target->t = xtables_calloc(1, size);
			cs.target->t->u.target_size = size;
			strcpy(cs.target->t->u.user.name, cs.jumpto);
		}
	}

	switch (command) {
	case CMD_APPEND:
		ret = append_entry(h, chain, *table, &cs, 0,
				   nsaddrs, saddrs, ndaddrs, daddrs,
				   options&OPT_VERBOSE, true);
		break;
	case CMD_DELETE:
		ret = delete_entry(chain, *table, &cs,
				   nsaddrs, saddrs, ndaddrs, daddrs,
				   options&OPT_VERBOSE, h);
		break;
	case CMD_DELETE_NUM:
		ret = nft_rule_delete_num(h, chain, *table, rulenum - 1, verbose);
		break;
	case CMD_REPLACE:
		ret = replace_entry(chain, *table, &cs, rulenum - 1,
				    saddrs, daddrs, options&OPT_VERBOSE, h);
		break;
	case CMD_INSERT:
		ret = append_entry(h, chain, *table, &cs, rulenum - 1,
				   nsaddrs, saddrs, ndaddrs, daddrs,
				   options&OPT_VERBOSE, false);
		break;
	case CMD_LIST:
		ret = list_entries(h, chain, *table,
				   rulenum,
				   options&OPT_VERBOSE,
				   options&OPT_NUMERIC,
				   /*options&OPT_EXPANDED*/0,
				   options&OPT_LINENUMBERS);
		break;
	case CMD_FLUSH:
		ret = nft_rule_flush(h, chain, *table);
		break;
	case CMD_ZERO:
		ret = nft_chain_zero_counters(h, chain, *table);
		break;
	case CMD_LIST|CMD_ZERO:
		ret = list_entries(h, chain, *table, rulenum,
				   options&OPT_VERBOSE,
				   options&OPT_NUMERIC,
				   /*options&OPT_EXPANDED*/0,
				   options&OPT_LINENUMBERS);
		if (ret)
			ret = nft_chain_zero_counters(h, chain, *table);
		break;
	case CMD_NEW_CHAIN:
		ret = nft_chain_user_add(h, chain, *table);
		break;
	case CMD_DELETE_CHAIN:
		ret = nft_chain_user_del(h, chain, *table);
		break;
	case CMD_RENAME_CHAIN:
		ret = nft_chain_user_rename(h, chain, *table, newname);
		break;
	case CMD_SET_POLICY:
		ret = nft_chain_set(h, *table, chain, policy, NULL);
		if (ret < 0)
			xtables_error(PARAMETER_PROBLEM, "Wrong policy `%s'\n",
				      policy);
		break;
	default:
		/* We should never reach this... */
		exit_tryhelp(2);
	}

/*	if (verbose > 1)
		dump_entries(*handle);*/

	return ret;
}