int AMSimpleBeamConfigurationWizard::nextId() const
{
	int pageId = currentId();
	switch(pageId)
	{
	case Page_Intro:
		if(showOptionPage())
			return Page_Option;
		else
			return pageWait(0);
	case Page_Final:
		return -1;
	default:
		int id = relativeId();
		if(isWaitPage(pageId))
			return pageSet(id);
		else if(isSetPage(pageId))
		{
			if(id == numberOfPages() - 1)
				return Page_Final;
			else
				return pageWait(id + 1);
		}
		return -1;
	}
}
AMBeamConfigurationWizard::AMBeamConfigurationWizard(QWidget* parent)
	: AMGraphicsViewWizard(parent)
{
	/// two points for each square, three squares.
	setNumberOfPoints(6);
	setNumberOfPages(numberOfPoints());
	setFreePage(Page_Free);

	setRotationEnabled(false);

	setPage(Page_Intro, new AMWizardPage);
	setPage(Page_Final, new AMWizardPage);
	setPage(Page_Option, new AMWizardOptionPage);
	for(int i = 0; i < numberOfPages(); i++)
	{
		setPage(pageWait(i), new AMBeamWaitPage);
		/* kind of a dirty hack here, but this makes the
		   wait logic cleaner */
		if(i < 3)
			setPage(pageSet(i), new AMBeamCheckPage);
		else
			setPage(pageSet(i), new AMBeamSelectPage);
	}
	setStartId(Page_Intro);
	setOption(HaveHelpButton, true);
	connect(this, SIGNAL(helpRequested()), this, SLOT(showHelp()));
	setWindowTitle(message(Wizard_Title));
	/* have to disconnect/connect the buttons to get them to work with the new slots */
	disconnect(button(QWizard::BackButton), SIGNAL(clicked()), this, SLOT(back()));
	connect(button(QWizard::BackButton), SIGNAL(clicked()), this, SLOT(back()));
	disconnect(button(QWizard::NextButton), SIGNAL(clicked()), this, SLOT(next()));
	connect(button(QWizard::NextButton), SIGNAL(clicked()), this, SLOT(next()));

	setMinimumSize(600,600);

	setting_ = false;
	reviewBeamShape_ = true;




	for(int i = 0; i < numberOfPoints(); i++)
	{
		pointListAppend(new QPointF(0,0));
	}

	topLeft_ = true;

	coordinateListAppend(new QVector3D(0,0,0));
	coordinateListAppend(new QVector3D(0,-1,0));
	coordinateListAppend(new QVector3D(0,1,0));
	coordinateListAppend(new QVector3D(0,0,0));
	coordinateListAppend(new QVector3D(0,-1,0));
	coordinateListAppend(new QVector3D(0,1,0));


	addOptionPage(Page_Intro);

}
qreal KDReports::TextDocReportLayout::layoutAsOnePage(qreal docWidth)
{
    m_textDocument.layoutWithTextWidth(docWidth);
    qreal docHeight = m_textDocument.contentDocument().size().height();

#if QT_VERSION <= 0x040300
    // Qt-4.2 bug, fixed in Qt-4.3:  QTextDocumentLayout::dynamicPageCount()
    // returns docheight/pageheight + 1. So if the doc is just as high as the page, I get 2 pages.
    docHeight += 1;
#endif

    // We need to get rid of all page breaks...
    // Unittest: PageLayout::testEndlessPrinterWithPageBreaks()
    QTextCursor c(&m_textDocument.contentDocument());
    c.beginEditBlock();
    QTextBlock block = m_textDocument.contentDocument().firstBlock();
    do {
        //qDebug() << "addBlock: Looking at block" << block.blockNumber();
        QTextBlockFormat format = block.blockFormat();
        if ( format.pageBreakPolicy() != QTextBlockFormat::PageBreak_Auto )
            format.setPageBreakPolicy( QTextBlockFormat::PageBreak_Auto );
        c.setPosition( block.position() );
        c.setBlockFormat( format );
        block = block.next();
    } while ( block.isValid() );
    c.endEditBlock();

    setPageContentSize(QSizeF(docWidth, docHeight));
    qDebug() << "m_textDocument.layoutDocument().setPageSize" << docWidth << "x" << docHeight << numberOfPages() << "pages";
    qreal newDocHeight = m_textDocument.contentDocument().size().height();
    if (newDocHeight > docHeight) {
        // QTextDocument is playing tricks on us; it was able to layout as docWidth x docHeight
        // but once we set that as the page size, we end up with more height...
        // Unittest: PageLayout::testEndlessPrinterBug()
        qDebug() << "newDocHeight=" << newDocHeight << "expected" << docHeight;
        setPageContentSize(QSizeF(docWidth, newDocHeight));
        newDocHeight = m_textDocument.contentDocument().size().height();
        qDebug() << "final newDocHeight=" << newDocHeight << numberOfPages() << "pages";
    }

    Q_ASSERT(numberOfPages() == 1);
    return newDocHeight;
}
bool AMBeamConfigurationWizard::allChecked() const
{
	bool checkedSet = true;
	for(int i = 0; i < numberOfPages()/2; i++)
	{
		checkedSet *= checked(pageSet(i));
	}

	return checkedSet;
}
Exemplo n.º 5
0
void DSPDFViewer::gotoPage(unsigned int pageNumber)
{
  if ( m_pagenumber != pageNumber 
      && numberOfPages() > pageNumber )
  {
    m_pagenumber = pageNumber;
    renderPage();
  } else {
    qWarning() << "Requested page number" << pageNumber << "which is out of range! Ignoring request.";
  }
}
Exemplo n.º 6
0
bool KDReports::Report::printWithDialog( QWidget* parent )
{
    QPrinter printer;
    setupPrinter( &printer );
    QPointer<QPrintDialog> dialog = new QPrintDialog( &printer, parent );
    dialog->setMinMax( 1, numberOfPages() );
    bool ok = false;
    if ( dialog->exec() == QDialog::Accepted ) {
        // Well, the user can modify the page size in the printer dialog too - ensure layout matches
        d->ensureLayouted();
        ok = d->doPrint( &printer, parent );
    }
    delete dialog;
    return ok;
}
int AMBeamConfigurationWizard::nextId() const
{
	int pageId = currentId();
	switch(pageId)
	{
	case Page_Intro:
		if(showOptionPage())
			return Page_Option;
		else
			return pageWait(0);
	default:
		if(isWaitPage(pageId))
		{
			return pageSet(relativeId());
		}
		else if(isSetPage(pageId))
		{
			if((lastCheckPage() && allChecked()) || (relativeId() >= (numberOfPages() - 1)))
			{
					return Page_Final;
			}
			else if(isCheckPage() && !allChecked())/* change this to check all lower number pages */
			{
				return pageWait(numberOfPages()/2);
			}
			else
			{
				return pageWait(relativeId() + 1);
			}
		}
		else
		{
			return -1;
		}
	}
}
AMSimpleBeamConfigurationWizard::AMSimpleBeamConfigurationWizard(QWidget *parent)
	: AMGraphicsViewWizard(parent)
{
	setNumberOfPoints(3);
	setNumberOfPages(numberOfPoints());
	setFreePage(Page_Free);

	coordinateListAppend(new QVector3D(0,0,0));
	coordinateListAppend(new QVector3D(0,2,0));
	coordinateListAppend(new QVector3D(0,-2,0));

	setPage(Page_Intro, new AMWizardPage);
	setPage(Page_Option, new AMWizardOptionPage);
	setPage(Page_Final, new AMWizardPage);
	for(int i = 0; i < numberOfPages(); i++)
	{
		setPage(pageWait(i), new AMSimpleBeamConfigurationWaitPage);
		setPage(pageSet(i), new AMSimpleBeamConfigurationSetPage);
		connect(page(pageSet(i)), SIGNAL(initBeamShape()), this, SLOT(initBeamShape()));
		connect(page(pageSet(i)), SIGNAL(signalMousePressed(QPointF)), this, SLOT(mousePressedHandler(QPointF)));
		connect(page(pageSet(i)), SIGNAL(moveBeamShape(QPointF)), this, SLOT(moveBeamShapeHandler(QPointF)));
	}

	setStartId(Page_Intro);
	setOption(HaveHelpButton, true);
	connect(this, SIGNAL(helpRequested()), this, SLOT(showHelp()));

	setWindowTitle(message(Wizard_Title));

	disconnect(button(QWizard::BackButton), SIGNAL(clicked()), this, SLOT(back()));
	connect(button(QWizard::BackButton), SIGNAL(clicked()), this, SLOT(back()));

	setMinimumSize(600,600);

	/// Add options button to intro page
	addOptionPage(Page_Intro);

}
bool AMBeamConfigurationWizard::isCheckPage() const
{
	return currentId() < numberOfPages()/2;
}
Exemplo n.º 10
0
bool AMBeamConfigurationWizard::lastSetPage() const
{
	return relativeId() >= (numberOfPages() - 1);
}
Exemplo n.º 11
0
bool AMBeamConfigurationWizard::lastCheckPage() const
{
	return relativeId() == (numberOfPages()/2 - 1);
}
Exemplo n.º 12
0
void AMBeamConfigurationWizard::back()
{
	int pageId = currentId();
	int targetPage;
	switch(pageId)
	{
	case Page_Final:
		targetPage = pageWait(numberOfPages() - 1);
		while(currentId() != targetPage)
			QWizard::back();
		if(currentId() == targetPage)
			initializePage(targetPage);
		break;
	default:
		if(isWaitPage(pageId))
		{
			bool reinitialize = true;

			((AMWaitPage*)page(pageId))->stopTimer();

			if(relativeId(pageId) == 0)
			{
				targetPage = Page_Intro;
				reinitialize = false;
			}
			else
			{
				targetPage = pageWait(relativeId(pageId) - 1);
			}

			while(currentId() != targetPage)
			{
				QWizard::back();
			}

			if(currentId() == targetPage && reinitialize)
			{
				initializePage(targetPage);
			}
		}
		else if(isSetPage(pageId))
		{
			bool reinitialize = true;
			if(relativeId(pageId) == 0)
			{
				targetPage = Page_Intro;
				reinitialize = false;
			}
			else
			{
				targetPage = pageWait(relativeId(pageId) - 1);
			}
			while(currentId() != targetPage)
			{
				QWizard::back();
			}
			if(currentId() == targetPage && reinitialize)
			{
				initializePage(targetPage);
			}
		}
		else
		{
			AMGraphicsViewWizard::back();
		}
		break;
	}

}
Exemplo n.º 13
0
QString AMBeamConfigurationWizard::message(int type)
{
	if(type == Wizard_Title) return QString(tr("Beam Configuration Wizard"));
	else if(type == Help_Title) return QString(tr("Help"));
	int pageId = currentId();
	switch(pageId)
	{
	case Page_Intro:
		switch(type)
		{
		case Title:
			return QString(tr("Beam Configuration Wizard"));
		case Text:
			return QString(tr("This wizard will help you to configure the beam settings. \n") +
				       tr("The sample plate will be moved to three different locations. ") +
				       tr("If, at any of the three locations, ") +
				       tr("the rectangle on screen does not match up well to the location of the beamspot uncheck the checkbox on that ") +
				       tr("page.  You will then be asked to draw a rectangle around the beamspot in each of the three positions.  For further ") +
				       tr("explanation, click the \"Help\" button for detailed information for that page."));
		case Help:
			return QString(tr("To start the configuration of the beam, click next on this page.")
				       + tr("  If all the beamspots correspond to the visible beam, check the boxes")
				       + tr(" to indicate that the beam is correct.  If the beamspots do not line up, they")
				       + tr(" can be configured by marking the beam as being incorrect.  If there is no")
				       + tr(" visible beam, it may be that the visible beam has not been enabled.  If it has")
				       + tr(" and the beam is still not visible, ensure that the beam is on.  If the beam is on")
				       + tr(" and is visible, but is not appearing on the sample plate, it may need to be manipulated")
				       + tr(" until it is under the beam.  This may require a change in sample points.  These can")
				       + tr(" can be configured in 'options' (on this page).  Changing these values will change where")
				       + tr(" the sample plate moves to for the beam configuration."));
		case Other:
		case Default:
		default:
			break;
		}
		break;
	case Page_Final:
		switch(type)
		{
		case Title:
			return QString(tr("Configuration complete"));
		case Text:
			return QString(tr("Configuration has been completed.  The beam path has been recalculated."));
		case Help:
			return QString(tr("If the beam appears to be in the wrong place, this configuration may be rerun.  If the beam is known to be divergent")
				       + tr(" it may need to be selected from the main sample camera configuration settings."));
		case Other:
		case Default:
		default:
			break;
		}
	case Page_Option:
		switch(type)
		{
		case Title:
			return QString(tr("Movement Configuration"));
		case Text:
			return QString(tr("Set the points to move the motor to here.  These may need to be changed if something")
				       + tr(" has been moved inside the end station."));
		case Help:
			return QString(tr("Set the coordinates that will be moved to in the wizard here.  For the Beam Configuration, all points must have different y values"));
		case Other:
		case Default:
		default:
			break;
		}

	default:
		if(isWaitPage(pageId))
		{
			switch(type)
			{
			case Title:
				return QString(tr("Please Wait"));
			case Text:
				return QString(tr("Moving to position %1")).arg(relativeId() + 1);
			case Help:
				return QString(tr("If the configuration is stuck here please check to make sure that motor movement is enabled.")
					       + tr(" If movement is enabled there may be a problem communicating with the sample manipulator motors."));
			case Other:
			case Default:
			default:
				break;
			}
			break;
		}
		else if(isSetPage(pageId))
		{
			if(relativeId(pageId) < numberOfPages()/2)
			{
				switch(type)
				{
				case Title:
					return QString(tr("Confirm Beam"));
				case Text:
					return QString(tr("Check to see if beam %1 is in the correct configuration.")).arg(relativeId()%3 + 1);
				case Help:
					return QString(tr("Check to see if the rectangle appears around the beamspot.  \n") +
						       tr("If the beamspot is not visible, ensure that visible light has been turned on.  \n") +
						       tr("If the beamspot is still not visible, the beam may be moved drastically away from its usual spot.  ") +
						       tr("This may require changing of the coordinates on the options page, accessible from the introduction page."));
				case Other:
					return QString(tr("Is the beam correct?"));
				case Default:
				default:
					break;
				}
				break;
			}
			else
			{
				switch(type)
				{
				case Title:
					return QString(tr("Set Beam"));
				case Text:
					return QString(tr("Draw a box over beam position %1")).arg(relativeId()%3 + 1);
				case Help:
					return QString(tr("Draw a box over the visible beamspot.  To draw a box click and drag to create the corners.  "))
							+ tr("Try to fit the box to best encompass the entire beamspot.");
				case Other:
				case Default:
				default:
					break;
				}
				break;
			}
		}
		return QString(tr("Error - unknown page."));
	}

	return QString(tr("Error - unknown message type."));
}
Exemplo n.º 14
0
DSPDFViewer::DSPDFViewer(const RuntimeConfiguration& r): 
	runtimeConfiguration(r),
	pdfDocument(Poppler::Document::load(r.filePathQString()))
	,
 renderFactory(r.filePathQString()),
 m_pagenumber(0),
 audienceWindow(0,  r.useFullPage()? PagePart::FullPage : PagePart::LeftHalf , false, r),
 secondaryWindow(1, r.useFullPage()? PagePart::FullPage : PagePart::RightHalf, true, r, r.useSecondScreen() )
{
  qDebug() << "Starting constructor" ;
  
  if ( ! r.useSecondScreen() ) {
    secondaryWindow.hide();
  }
  
  audienceWindow.showLoadingScreen(0);
  secondaryWindow.showLoadingScreen(0);
  
  if ( ! pdfDocument  || pdfDocument->isLocked() )
  {
    /// FIXME: Error message
    throw std::runtime_error("I was not able to open the PDF document. Sorry.");
  }
  setHighQuality(true);
  
  qDebug() << "Connecting audience window";
  
  audienceWindow.setPageNumberLimits(0, numberOfPages()-1);
  
  connect( &renderFactory, SIGNAL(pageRendered(QSharedPointer<RenderedPage>)), &audienceWindow, SLOT(renderedPageIncoming(QSharedPointer<RenderedPage>)));
  connect( &renderFactory, SIGNAL(thumbnailRendered(QSharedPointer<RenderedPage>)), &audienceWindow, SLOT(renderedThumbnailIncoming(QSharedPointer<RenderedPage>)));
  
  connect( &audienceWindow, SIGNAL(nextPageRequested()), this, SLOT(goForward()));
  connect( &audienceWindow, SIGNAL(previousPageRequested()), this, SLOT(goBackward()));
  connect( &audienceWindow, SIGNAL(pageRequested(uint)), this, SLOT(gotoPage(uint)));
  
  connect( &audienceWindow, SIGNAL(quitRequested()), this, SLOT(exit()));
  connect( &audienceWindow, SIGNAL(rerenderRequested()), this, SLOT(renderPage()));
  connect( &audienceWindow, SIGNAL(restartRequested()), this, SLOT(goToStartAndResetClocks()));
  
  connect( &audienceWindow, SIGNAL(screenSwapRequested()), this, SLOT(swapScreens()) );
  
  if ( r.useSecondScreen() )
  {
    qDebug() << "Connecting secondary window";
    
    secondaryWindow.setPageNumberLimits(0, numberOfPages()-1);
    
    connect( &renderFactory, SIGNAL(pageRendered(QSharedPointer<RenderedPage>)), &secondaryWindow, SLOT(renderedPageIncoming(QSharedPointer<RenderedPage>)));
    connect( &renderFactory, SIGNAL(thumbnailRendered(QSharedPointer<RenderedPage>)), &secondaryWindow, SLOT(renderedThumbnailIncoming(QSharedPointer<RenderedPage>)));

    connect( &secondaryWindow, SIGNAL(nextPageRequested()), this, SLOT(goForward()));
    connect( &secondaryWindow, SIGNAL(previousPageRequested()), this, SLOT(goBackward()));
    connect( &secondaryWindow, SIGNAL(pageRequested(uint)), this, SLOT(gotoPage(uint)));
    
    connect( &secondaryWindow, SIGNAL(quitRequested()), this, SLOT(exit()));
    connect( &secondaryWindow, SIGNAL(rerenderRequested()), this, SLOT(renderPage()));
    connect( &secondaryWindow, SIGNAL(restartRequested()), this, SLOT(goToStartAndResetClocks()));
    
    connect( &secondaryWindow, SIGNAL(screenSwapRequested()), this, SLOT(swapScreens()) );
    
    connect( this, SIGNAL(presentationClockUpdate(QTime)), &secondaryWindow, SLOT(updatePresentationClock(QTime)));
    connect( this, SIGNAL(slideClockUpdate(QTime)), &secondaryWindow, SLOT(updateSlideClock(QTime)));
    connect( this, SIGNAL(wallClockUpdate(QTime)), &secondaryWindow, SLOT(updateWallClock(QTime)));
  

  }
  
  renderPage();
  
  clockDisplayTimer.setInterval(TIMER_UPDATE_INTERVAL);
  clockDisplayTimer.start();
  connect( &clockDisplayTimer, SIGNAL(timeout()), this, SLOT(sendAllClockSignals()));
  sendAllClockSignals();
}
Exemplo n.º 15
0
void DSPDFViewer::renderPage()
{
  qDebug() << "Requesting rendering of page " << m_pagenumber;
  audienceWindow.showLoadingScreen(m_pagenumber);
  secondaryWindow.showLoadingScreen(m_pagenumber);
  if ( runtimeConfiguration.showThumbnails() ) {
    theFactory()->requestThumbnailRendering(m_pagenumber);
  }
  theFactory()->requestPageRendering( toRenderIdent(m_pagenumber, audienceWindow));
  
  if ( runtimeConfiguration.useSecondScreen() ) {
    theFactory()->requestPageRendering( toRenderIdent(m_pagenumber, secondaryWindow));
  }
  
  /** Pre-Render next pages **/
  for ( unsigned i=m_pagenumber; i<m_pagenumber+runtimeConfiguration.prerenderNextPages() && i < numberOfPages() ; i++) {
    if ( runtimeConfiguration.showThumbnails() ) {
      theFactory()->requestThumbnailRendering(i);
    }
    theFactory()->requestPageRendering( toRenderIdent(i, audienceWindow));
    if ( runtimeConfiguration.useSecondScreen() ) {
      theFactory()->requestPageRendering( toRenderIdent(i, secondaryWindow));
    }
  }
  
  /** Pre-Render previous pages **/
  
  for ( unsigned i= std::max(m_pagenumber,runtimeConfiguration.prerenderPreviousPages())-runtimeConfiguration.prerenderPreviousPages();
       i<m_pagenumber; i++) {
    if ( runtimeConfiguration.showThumbnails() ) {
      theFactory()->requestThumbnailRendering(i);
    }
    theFactory()->requestPageRendering(toRenderIdent(i, audienceWindow));
    if ( runtimeConfiguration.useSecondScreen() ) {
      theFactory()->requestPageRendering(toRenderIdent(i, secondaryWindow));
    }
  }
  
}
Exemplo n.º 16
0
void DSPDFViewer::goForward()
{
  resetSlideClock();
  if ( pageNumber() < numberOfPages()-1 )
    gotoPage(pageNumber()+1);
}