Exemplo n.º 1
0
static noinline void archosg9_init_lowlevel(void)
{
	struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
	struct dpll_param mpu = OMAP4_MPU_DPLL_PARAM_19M2_MPU1200;
	struct dpll_param iva = OMAP4_IVA_DPLL_PARAM_19M2;
	struct dpll_param per = OMAP4_PER_DPLL_PARAM_19M2;
	struct dpll_param abe = OMAP4_ABE_DPLL_PARAM_19M2;
	struct dpll_param usb = OMAP4_USB_DPLL_PARAM_19M2;

	set_muxconf_regs();

	omap4460_scale_vcores(TPS62361_VSEL0_GPIO, 1380);

	/* Enable all clocks */
	omap4_enable_all_clocks();
	writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);

	/* Configure all DPLL's at 100% OPP */
	omap4_configure_mpu_dpll(&mpu);
	omap4_configure_iva_dpll(&iva);
	omap4_configure_per_dpll(&per);
	omap4_configure_abe_dpll(&abe);
	omap4_configure_usb_dpll(&usb);

	omap4_ddr_init(&ddr_regs_400_mhz_2cs, &core);
}
Exemplo n.º 2
0
static void noinline pcm049_init_lowlevel(void)
{
	struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
	struct dpll_param mpu44xx = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
	struct dpll_param mpu4460 = OMAP4_MPU_DPLL_PARAM_19M2_MPU920;
	struct dpll_param iva = OMAP4_IVA_DPLL_PARAM_19M2;
	struct dpll_param per = OMAP4_PER_DPLL_PARAM_19M2;
	struct dpll_param abe = OMAP4_ABE_DPLL_PARAM_19M2;
	struct dpll_param usb = OMAP4_USB_DPLL_PARAM_19M2;
	unsigned int rev = omap4_revision();

	set_muxconf_regs();

#ifdef CONFIG_1024MB_DDR2RAM
		omap4_ddr_init(&ddr_regs_mt42L128M64_25_400_mhz, &core);
#else
		omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);
#endif

	/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
	if (rev < OMAP4460_ES1_0)
		omap4430_scale_vcores();
	else
		omap4460_scale_vcores(TPS62361_VSEL0_GPIO, 1320);

	writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);

	/* Configure all DPLL's at 100% OPP */
	if (rev < OMAP4460_ES1_0)
		omap4_configure_mpu_dpll(&mpu44xx);
	else
		omap4_configure_mpu_dpll(&mpu4460);

	omap4_configure_iva_dpll(&iva);
	omap4_configure_per_dpll(&per);
	omap4_configure_abe_dpll(&abe);
	omap4_configure_usb_dpll(&usb);

	/* Enable all clocks */
	omap4_enable_all_clocks();

	sr32(OMAP44XX_SCRM_AUXCLK3, 8, 1, 0x1);  /* enable software ioreq */
	sr32(OMAP44XX_SCRM_AUXCLK3, 1, 2, 0x0);  /* set for sys_clk (19.2MHz) */
	sr32(OMAP44XX_SCRM_AUXCLK3, 16, 4, 0x0); /* set divisor to 1 */
	sr32(OMAP44XX_SCRM_ALTCLKSRC, 0, 1, 0x1);  /* activate clock source */
	sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);  /* enable clocks */
}
Exemplo n.º 3
0
static noinline void pcaaxl2_init_lowlevel(void)
{
	struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
	struct dpll_param mpu44xx = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
	struct dpll_param mpu4460 = OMAP4_MPU_DPLL_PARAM_19M2_MPU920;
	struct dpll_param iva = OMAP4_IVA_DPLL_PARAM_19M2;
	struct dpll_param per = OMAP4_PER_DPLL_PARAM_19M2;
	struct dpll_param abe = OMAP4_ABE_DPLL_PARAM_19M2;
	struct dpll_param usb = OMAP4_USB_DPLL_PARAM_19M2;
	unsigned int rev = omap4_revision();

	set_muxconf_regs();

	omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);

	if (rev < OMAP4460_ES1_0)
		omap4430_scale_vcores();
	else
		omap4460_scale_vcores(TPS62361_VSEL0_GPIO, 1320);

	writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);

	/* Configure all DPLL's at 100% OPP */
	if (rev < OMAP4460_ES1_0)
		omap4_configure_mpu_dpll(&mpu44xx);
	else
		omap4_configure_mpu_dpll(&mpu4460);

	omap4_configure_iva_dpll(&iva);
	omap4_configure_per_dpll(&per);
	omap4_configure_abe_dpll(&abe);
	omap4_configure_usb_dpll(&usb);

	/* Enable all clocks */
	omap4_enable_all_clocks();

	sr32(0x4A30a31C, 8, 1, 0x1);  /* enable software ioreq */
	sr32(0x4A30a31C, 1, 2, 0x0);  /* set for sys_clk (19.2MHz) */
	sr32(0x4A30a31C, 16, 4, 0x0); /* set divisor to 1 */
	sr32(0x4A30a110, 0, 1, 0x1);  /* set the clock source to active */
	sr32(0x4A30a110, 2, 2, 0x3);  /* enable clocks */
}