MainWindow::MainWindow(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::MainWindow)
{
fDoc = NULL;
fEnableAutoBreakdown = true;
fDefaultFps = 24;
ui->setupUi(this);
setAcceptDrops(true);
ui->waveformView->SetScrollArea(ui->scrollArea);
ui->fpsEdit->setValidator(new QIntValidator(1, 120));
ui->exportChoice->addItem("Spine");
connect(ui->actionZoomIn, SIGNAL(triggered()), ui->waveformView, SLOT(onZoomIn()));
connect(ui->actionZoomOut, SIGNAL(triggered()), ui->waveformView, SLOT(onZoomOut()));
connect(ui->actionAutoZoom, SIGNAL(triggered()), ui->waveformView, SLOT(onAutoZoom()));
connect(ui->fpsEdit, SIGNAL(textChanged(QString)), this, SLOT(onFpsChange(QString)));
connect(ui->waveformView, SIGNAL(frameChanged(int)), ui->mouthView, SLOT(onFrameChanged(int)));
RestoreSettings();
updateActions();
}
void CSceneWidget::keyPressEvent(QKeyEvent *event)
{
switch (event->key()) {
case Qt::Key_Plus:
onZoomIn();
break;
case Qt::Key_Minus:
onZoomOut();
break;
default:
QGraphicsView::keyPressEvent(event);
}
}
/**
* @brief ImageDialog::ImageDialog
* @param parent
*/
ImageDialog::ImageDialog(QWidget *parent) :
QDialog(parent),
ui(new Ui::ImageDialog)
{
ui->setupUi(this);
#ifdef Q_WS_MAC
setWindowFlags((windowFlags() & ~Qt::WindowType_Mask) | Qt::Sheet);
setStyleSheet(styleSheet() + " #ImageDialog { border: 1px solid rgba(0, 0, 0, 100); border-top: none; }");
#else
setWindowFlags((windowFlags() & ~Qt::WindowType_Mask) | Qt::Dialog);
#endif
QSettings settings;
resize(settings.value("ImageDialog/Size").toSize());
connect(ui->table, SIGNAL(cellClicked(int,int)), this, SLOT(imageClicked(int, int)));
connect(ui->table, SIGNAL(sigDroppedImage(QUrl)), this, SLOT(onImageDropped(QUrl)));
connect(ui->buttonClose, SIGNAL(clicked()), this, SLOT(reject()));
connect(ui->buttonChoose, SIGNAL(clicked()), this, SLOT(chooseLocalImage()));
connect(ui->previewSizeSlider, SIGNAL(valueChanged(int)), this, SLOT(onPreviewSizeChange(int)));
connect(ui->buttonZoomIn, SIGNAL(clicked()), this, SLOT(onZoomIn()));
connect(ui->buttonZoomOut, SIGNAL(clicked()), this, SLOT(onZoomOut()));
QMovie *movie = new QMovie(":/img/spinner.gif");
movie->start();
ui->labelSpinner->setMovie(movie);
clear();
setImageType(TypePoster);
m_currentDownloadReply = 0;
QPixmap zoomOut(":/img/zoom_out.png");
QPixmap zoomIn(":/img/zoom_in.png");
QPainter p;
p.begin(&zoomOut);
p.setCompositionMode(QPainter::CompositionMode_SourceIn);
p.fillRect(zoomOut.rect(), QColor(0, 0, 0, 150));
p.end();
p.begin(&zoomIn);
p.setCompositionMode(QPainter::CompositionMode_SourceIn);
p.fillRect(zoomIn.rect(), QColor(0, 0, 0, 150));
p.end();
ui->buttonZoomOut->setIcon(QIcon(zoomOut));
ui->buttonZoomIn->setIcon(QIcon(zoomIn));
m_noElementsLabel = new QLabel(tr("No images found"), ui->table);
m_noElementsLabel->setMargin(10);
m_noElementsLabel->hide();
}
void SCgWindow::createToolBar()
{
mToolBar = new QToolBar(this);
mToolBar->setIconSize(QSize(32, 32));
QActionGroup* group = new QActionGroup(mToolBar);
// Select mode
QAction *action = new QAction(findIcon("tool-select.png"), tr("Selection mode"), mToolBar);
action->setCheckable(true);
action->setChecked(true);
action->setShortcut(QKeySequence(tr("1", "Selection mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Select] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onSelectMode()));
//Pair creation mode
action = new QAction(findIcon("tool-pair.png"), tr("Pair creation mode"), mToolBar);
action->setCheckable(true);
action->setShortcut(QKeySequence(tr("2", "Pair creation mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Pair] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onPairMode()));
//Bus creation mode
action = new QAction(findIcon("tool-bus.png"), tr("Bus creation mode"), mToolBar);
action->setCheckable(true);
action->setShortcut(QKeySequence(tr("3", "Bus creation mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Bus] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onBusMode()));
//Contour creation mode
action = new QAction(findIcon("tool-contour.png"), tr("Contour creation mode"), mToolBar);
action->setCheckable(true);
action->setShortcut(QKeySequence(tr("4", "Contour creation mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Contour] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onContourMode()));
//
mToolBar->addSeparator();
//
// align group button
QToolButton *alignButton = new QToolButton(mToolBar);
alignButton->setIcon(findIcon("tool-align.png"));
alignButton->setPopupMode(QToolButton::InstantPopup);
alignButton->setToolTip(tr("Alignment"));
mToolBar->addWidget(alignButton);
//Grid alignment
action = new QAction(findIcon("tool-align-grid.png"), tr("Grid alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("5", "Grid alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onGridAlignment()));
// tuple alignment
action = new QAction(findIcon("tool-align-tuple.png"), tr("Tuple alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("6", "Tuple alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onTupleAlignment()));
//Vertical alignment
action = new QAction(findIcon("tool-align-vert.png"), tr("Vertical alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("7", "Vertical alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onVerticalAlignment()));
//Horizontal alignment
action = new QAction(findIcon("tool-align-horz.png"), tr("Horizontal alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("8", "Horizontal alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onHorizontalAlignment()));
// selection group button
QToolButton *selectButton = new QToolButton(mToolBar);
selectButton->setIcon(findIcon("tool-select-group.png"));
selectButton->setPopupMode(QToolButton::InstantPopup);
selectButton->setToolTip(tr("Selection group"));
mToolBar->addWidget(selectButton);
// input/output selection
action = new QAction(findIcon("tool-select-inout.png"), tr("Select input/output"), mToolBar);
action->setCheckable(false);
selectButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onSelectInputOutput()));
// sbgraph selection
action = new QAction(findIcon("tool-select-subgraph.png"), tr("Select subgraph"), mToolBar);
action->setCheckable(false);
selectButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onSelectSubgraph()));
mToolBar->addSeparator();
action = new QAction(findIcon("tool-export-image.png"), tr("Export image"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("0", "Export image")));
mToolBar->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onExportImage()));
//
mToolBar->addSeparator();
//
//Zoom in
action = new QAction(findIcon("tool-zoom-in.png"), tr("Zoom in"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("+", "Zoom in")));
mToolBar->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onZoomIn()));
//Scale combobox
QComboBox* b = new QComboBox(mToolBar);
b->setEditable(true);
b->setInsertPolicy(QComboBox::NoInsert);
b->addItems(SCgWindow::mScales);
b->setCurrentIndex(mScales.indexOf("100"));
mZoomFactorLine = b->lineEdit();
mZoomFactorLine->setInputMask("D90%");
mToolBar->addWidget(b);
connect(mZoomFactorLine, SIGNAL(textChanged(const QString&)), mView, SLOT(setScale(const QString&)));
connect(mView, SIGNAL(scaleChanged(qreal)), this, SLOT(onViewScaleChanged(qreal)));
//Zoom out
action = new QAction(findIcon("tool-zoom-out.png"), tr("Zoom out"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("-", "Zoom out")));
mToolBar->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onZoomOut()));
mToolBar->setWindowTitle(tr("SCg Tools"));
mToolBar->setObjectName("SCgMainToolBar");
//! @bug toolbar state is not saved
mToolBar->setMovable(false);
}
void SCgWindow::createToolBar()
{
mToolBar = new QToolBar(this);
mToolBar->setIconSize(QSize(32, 32));
QActionGroup* group = new QActionGroup(mToolBar);
// Select mode
QAction *action = new QAction(findIcon("tool-select.png"), tr("Selection mode"), mToolBar);
action->setCheckable(true);
action->setChecked(true);
action->setShortcut(QKeySequence(tr("1", "Selection mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Select] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onSelectMode()));
//Pair creation mode
action = new QAction(findIcon("tool-pair.png"), tr("Pair creation mode"), mToolBar);
action->setCheckable(true);
action->setShortcut(QKeySequence(tr("2", "Pair creation mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Pair] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onPairMode()));
//Bus creation mode
action = new QAction(findIcon("tool-bus.png"), tr("Bus creation mode"), mToolBar);
action->setCheckable(true);
action->setShortcut(QKeySequence(tr("3", "Bus creation mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Bus] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onBusMode()));
//Contour creation mode
action = new QAction(findIcon("tool-contour.png"), tr("Contour creation mode"), mToolBar);
action->setCheckable(true);
action->setShortcut(QKeySequence(tr("4", "Contour creation mode")));
group->addAction(action);
mToolBar->addAction(action);
mMode2Action[SCgScene::Mode_Contour] = action;
connect(action, SIGNAL(triggered()), this, SLOT(onContourMode()));
//
mToolBar->addSeparator();
//
// align group button
QToolButton *alignButton = new QToolButton(mToolBar);
alignButton->setIcon(findIcon("tool-align.png"));
alignButton->setPopupMode(QToolButton::InstantPopup);
mToolBar->addWidget(alignButton);
//Grid alignment
action = new QAction(findIcon("tool-align-grid.png"), tr("Grid alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("5", "Grid alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onGridAlignment()));
// tuple alignment
action = new QAction(findIcon("tool-align-tuple.png"), tr("Tuple alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("6", "Tuple alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onTupleAlignment()));
//Vertical alignment
action = new QAction(findIcon("tool-align-vert.png"), tr("Vertical alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("7", "Vertical alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onVerticalAlignment()));
//Horizontal alignment
action = new QAction(findIcon("tool-align-horz.png"), tr("Horizontal alignment"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("8", "Horizontal alignment")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onHorizontalAlignment()));
// Energy-based layout
action = new QAction(findIcon("tool-align-energy.png"), tr("Energy-based layout"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("9", "Energy-based layout")));
alignButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onEnergyBasedLayout()));
// selection group button
QToolButton *selectButton = new QToolButton(mToolBar);
selectButton->setIcon(findIcon("tool-select-group.png"));
selectButton->setPopupMode(QToolButton::InstantPopup);
mToolBar->addWidget(selectButton);
// input/output selection
action = new QAction(findIcon("tool-select-inout.png"), tr("Select input/output"), mToolBar);
action->setCheckable(false);
selectButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onSelectInputOutput()));
// sbgraph selection
action = new QAction(findIcon("tool-select-subgraph.png"), tr("Select subgraph"), mToolBar);
action->setCheckable(false);
selectButton->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onSelectSubgraph()));
mToolBar->addSeparator();
action = new QAction(findIcon("tool-export-image.png"), tr("Export image"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("0", "Export image")));
mToolBar->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onExportImage()));
//
mToolBar->addSeparator();
//
//Zoom label
mZoomLabel = new QLabel(mToolBar);
mToolBar->addWidget(mZoomLabel);
//Zoom in
action = new QAction(findIcon("tool-zoom-in.png"), tr("Zoom in"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("+", "Zoom in")));
mToolBar->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onZoomIn()));
//Zoom slider
mZoomSlider = new QSlider(Qt::Vertical);
//mZoomSlider->setInvertedAppearance(false);
mZoomSlider->setRange(25, 200);
mZoomSlider->setTickPosition(QSlider::TicksBelow);
mZoomSlider->setTickInterval(25);
mZoomSlider->setFixedHeight(150);
mZoomSlider->setSliderPosition(100);
mToolBar->addWidget(mZoomSlider);
connect(mZoomSlider, SIGNAL(valueChanged(int)), mView, SLOT(setScale(int)));
connect(mZoomSlider, SIGNAL(valueChanged(int)), this, SLOT(updateZoomLabel(int)));
connect(mView, SIGNAL(scaleChanged(qreal)), this, SLOT(onViewScaleChanged(qreal)));
//Zoom out
action = new QAction(findIcon("tool-zoom-out.png"), tr("Zoom out"), mToolBar);
action->setCheckable(false);
action->setShortcut(QKeySequence(tr("-", "Zoom out")));
mToolBar->addAction(action);
connect(action, SIGNAL(triggered()), this, SLOT(onZoomOut()));
mToolBar->setWindowTitle(tr("SCg Tools"));
mToolBar->setObjectName("SCgMainToolBar");
//! @bug toolbar state is not saved
mToolBar->setMovable(false);
}
