int
onlp_sfpi_control_set(int port, onlp_sfp_control_t control, int value)
{
int rv;
if (port < 0 || port >= 48) {
return ONLP_STATUS_E_UNSUPPORTED;
}
int addr = (port < 29) ? 61 : 62;
int bus = (addr == 61) ? 10 : 11;
switch(control)
{
case ONLP_SFP_CONTROL_TX_DISABLE:
{
if (onlp_file_write_int(value, MODULE_TXDISABLE_FORMAT, bus, addr, (port+1)) < 0) {
AIM_LOG_ERROR("Unable to set tx_disable status to port(%d)\r\n", port);
rv = ONLP_STATUS_E_INTERNAL;
}
else {
rv = ONLP_STATUS_OK;
}
break;
}
default:
rv = ONLP_STATUS_E_UNSUPPORTED;
break;
}
return rv;
}
int
sys_fan_rpm_percent_set(int perc)
{
int rc;
rc = onlp_file_write_int(perc, SYS_FAN_PREFIX "pwm%d", FAN_CTRL_SET1);
if (rc < 0) {
return ONLP_STATUS_E_INTERNAL;
}
rc = onlp_file_write_int(perc, SYS_FAN_PREFIX "pwm%d", FAN_CTRL_SET2);
if (rc < 0) {
return ONLP_STATUS_E_INTERNAL;
}
return ONLP_STATUS_OK;
}
int
onlp_sfpi_dev_writew(int port, uint8_t devaddr, uint8_t addr, uint16_t value)
{
int rv = ONLP_STATUS_OK;
int data = 0;
data = ((addr << 16) | (value & 0xffff)) & 0x00ffffff;
rv = onlp_file_write_int(data, SYS_HWMON2_PREFIX "/port_%d_sfp_copper", (port+1));
return rv;
}
int pca953x_gpio_value_set(int gpio, int value) {
int ret;
pca953x_gpio_direction_set(gpio, GPIO_OUT);
try_export_gpio(gpio);
ret = onlp_file_write_int(value, "%s%d/value", GPIO_PREF, gpio);
try_unexport_gpio(gpio);
return ret;
}
int
onlp_sfpi_control_set(int port, onlp_sfp_control_t control, int value)
{
int rv;
char* path = NULL;
switch(control){
case ONLP_SFP_CONTROL_RESET_STATE:
{
path = sfp_get_port_status_path(port, "reset");
if (onlp_file_write_int(value, path) != 0) {
AIM_LOG_ERROR("Unable to set reset status to port(%d)\r\n", port);
rv = ONLP_STATUS_E_INTERNAL;
}
else {
rv = ONLP_STATUS_OK;
}
break;
}
case ONLP_SFP_CONTROL_LP_MODE:
{
path = sfp_get_port_status_path(port, "lpmode");
if (onlp_file_write_int(value, path) != 0) {
AIM_LOG_ERROR("Unable to set lp_mode status to port(%d)\r\n", port);
rv = ONLP_STATUS_E_INTERNAL;
}
else {
rv = ONLP_STATUS_OK;
}
break;
}
default:
rv = ONLP_STATUS_E_UNSUPPORTED;
}
return rv;
}
static int try_unexport_gpio(int gpio) {
char filename[PATH_MAX];
memset(filename, 0, sizeof(filename));
sprintf(filename, "%s%d/value", GPIO_PREF, gpio);
if(file_exists(filename)) {
onlp_file_write_int(gpio, GPIO_UNEXPORT);
}
return ONLP_STATUS_OK;
}
/*
* This function puts the LED into the given mode. It is a more functional
* interface for multimode LEDs.
*
* Only modes reported in the LED's capabilities will be attempted.
*/
int
onlp_ledi_mode_set(onlp_oid_t id, onlp_led_mode_t mode)
{
int lid;
VALIDATE(id);
lid = ONLP_OID_ID_GET(id);
if (onlp_file_write_int(onlp_to_driver_led_mode(lid , mode), LED_FORMAT, leds[lid]) < 0) {
return ONLP_STATUS_E_INTERNAL;
}
return ONLP_STATUS_OK;
}
int
onlp_sfpi_control_set(int port, onlp_sfp_control_t control, int value)
{
int rv = ONLP_STATUS_OK;
int supported = 0;
if ((onlp_sfpi_control_supported(port, control, &supported) == ONLP_STATUS_OK) && (supported == 0))
return ONLP_STATUS_E_UNSUPPORTED;
switch (control)
{
case ONLP_SFP_CONTROL_TX_DISABLE:
rv = onlp_file_write_int(value, SYS_HWMON2_PREFIX "/port_%d_tx_disable", (port+1));
break;
default:
rv = ONLP_STATUS_E_UNSUPPORTED;
break;
}
return rv;
}
int psu_ym2651y_pmbus_info_set(int id, char *node, int value)
{
char path[PSU_NODE_MAX_PATH_LEN] = {0};
switch (id) {
case PSU1_ID:
sprintf(path, "%s%s", PSU1_AC_PMBUS_PREFIX, node);
break;
case PSU2_ID:
sprintf(path, "%s%s", PSU2_AC_PMBUS_PREFIX, node);
break;
default:
return ONLP_STATUS_E_UNSUPPORTED;
};
if (onlp_file_write_int(value, path) < 0) {
AIM_LOG_ERROR("Unable to write data to file (%s)\r\n", path);
return ONLP_STATUS_E_INTERNAL;
}
return ONLP_STATUS_OK;
}