Exemplo n.º 1
0
void NodeList::timePingReply(const QByteArray& packet, const SharedNodePointer& sendingNode) {
    QDataStream packetStream(packet);
    packetStream.skipRawData(numBytesForPacketHeader(packet));
    
    quint8 pingType;
    quint64 ourOriginalTime, othersReplyTime;
    
    packetStream >> pingType >> ourOriginalTime >> othersReplyTime;
    
    quint64 now = usecTimestampNow();
    int pingTime = now - ourOriginalTime;
    int oneWayFlightTime = pingTime / 2; // half of the ping is our one way flight
    
    // The other node's expected time should be our original time plus the one way flight time
    // anything other than that is clock skew
    quint64 othersExprectedReply = ourOriginalTime + oneWayFlightTime;
    int clockSkew = othersReplyTime - othersExprectedReply;
    
    sendingNode->setPingMs(pingTime / 1000);
    sendingNode->updateClockSkewUsec(clockSkew);

    const bool wantDebug = false;
    
    if (wantDebug) {
        qDebug() << "PING_REPLY from node " << *sendingNode << "\n" <<
        "                     now: " << now << "\n" <<
        "                 ourTime: " << ourOriginalTime << "\n" <<
        "                pingTime: " << pingTime << "\n" <<
        "        oneWayFlightTime: " << oneWayFlightTime << "\n" <<
        "         othersReplyTime: " << othersReplyTime << "\n" <<
        "    othersExprectedReply: " << othersExprectedReply << "\n" <<
        "               clockSkew: " << clockSkew  << "\n" <<
        "       average clockSkew: " << sendingNode->getClockSkewUsec();
    }
}
Exemplo n.º 2
0
int InjectedAudioRingBuffer::parseData(const QByteArray& packet) {
    // setup a data stream to read from this packet
    QDataStream packetStream(packet);
    packetStream.skipRawData(numBytesForPacketHeader(packet));
    
    // push past the stream identifier
    packetStream.skipRawData(NUM_BYTES_RFC4122_UUID);
    
    // pull the loopback flag and set our boolean
    uchar shouldLoopback;
    packetStream >> shouldLoopback;
    _shouldLoopbackForNode = (shouldLoopback == 1);
    
    // use parsePositionalData in parent PostionalAudioRingBuffer class to pull common positional data
    packetStream.skipRawData(parsePositionalData(packet.mid(packetStream.device()->pos())));
    
    // pull out the radius for this injected source - if it's zero this is a point source
    packetStream >> _radius;
    
    quint8 attenuationByte = 0;
    packetStream >> attenuationByte;
    _attenuationRatio = attenuationByte / (float) MAX_INJECTOR_VOLUME;
    
    packetStream.skipRawData(writeData(packet.data() + packetStream.device()->pos(),
                                       packet.size() - packetStream.device()->pos()));
    
    return packetStream.device()->pos();
}
Exemplo n.º 3
0
ThreadedAssignment* AssignmentFactory::unpackAssignment(const QByteArray& packet) {
    QDataStream packetStream(packet);
    packetStream.skipRawData(numBytesForPacketHeader(packet));

    quint8 packedType;
    packetStream >> packedType;    
    
    Assignment::Type unpackedType = (Assignment::Type) packedType;
    
    switch (unpackedType) {
        case Assignment::AudioMixerType:
            return new AudioMixer(packet);
        case Assignment::AvatarMixerType:
            return new AvatarMixer(packet);
        case Assignment::AgentType:
            return new Agent(packet);
        case Assignment::VoxelServerType:
            return new VoxelServer(packet);
        case Assignment::ParticleServerType:
            return new ParticleServer(packet);
        case Assignment::MetavoxelServerType:
            return new MetavoxelServer(packet);
        default:
            return NULL;
    }
}
Exemplo n.º 4
0
int InjectedAudioStream::parseStreamProperties(PacketType type, const QByteArray& packetAfterSeqNum, int& numAudioSamples) {
    // setup a data stream to read from this packet
    QDataStream packetStream(packetAfterSeqNum);

    // skip the stream identifier
    packetStream.skipRawData(NUM_BYTES_RFC4122_UUID);

    // pull the loopback flag and set our boolean
    uchar shouldLoopback;
    packetStream >> shouldLoopback;
    _shouldLoopbackForNode = (shouldLoopback == 1);

    // use parsePositionalData in parent PostionalAudioRingBuffer class to pull common positional data
    packetStream.skipRawData(parsePositionalData(packetAfterSeqNum.mid(packetStream.device()->pos())));

    // pull out the radius for this injected source - if it's zero this is a point source
    packetStream >> _radius;

    quint8 attenuationByte = 0;
    packetStream >> attenuationByte;
    _attenuationRatio = attenuationByte / (float)MAX_INJECTOR_VOLUME;

    int numAudioBytes = packetAfterSeqNum.size() - packetStream.device()->pos();
    numAudioSamples = numAudioBytes / sizeof(int16_t);

    return packetStream.device()->pos();
}
Exemplo n.º 5
0
void NodeList::processDomainServerAddedNode(QSharedPointer<NLPacket> packet) {
    // setup a QDataStream
    QDataStream packetStream(packet.data());

    // use our shared method to pull out the new node
    parseNodeFromPacketStream(packetStream);
}
Exemplo n.º 6
0
Common::SeekableReadStream *WwRIFFVorbisStream::createPacket() {
	if (_currentOffset >= (_dataOffset + _dataSize))
		return 0;

	Common::MemoryWriteStreamDynamic header(true);
	Common::BitStreamWriter8LSB bits(header);

	Packet audioPacket(*_inStream, _currentOffset, _noGranule);

	const size_t packerHeaderSize = audioPacket.headerSize();
	const size_t size = audioPacket.size();
	const size_t packetPayloadOffset = audioPacket.offset();
	const size_t nextOffset = audioPacket.nextOffset();

	if (_currentOffset + packerHeaderSize > _dataOffset + _dataSize)
		throw Common::Exception("WwRIFFVorbisStream::createPacket(): "
		                        "Page header truncated");

	_currentOffset = packetPayloadOffset;
	_inStream->seek(_currentOffset);

	Common::ScopedPtr<Common::SeekableReadStream> packetStream(_inStream->readStream(size));

	_currentOffset = nextOffset;

	if (_currentOffset > (_dataOffset + _dataSize))
		throw Common::Exception("WwRIFFVorbisStream::createPacket(): "
		                        "Page truncated");

	return packetStream.release();
}
Exemplo n.º 7
0
void NodeList::processDomainServerAddedNode(QSharedPointer<ReceivedMessage> message) {
    // setup a QDataStream
    QDataStream packetStream(message->getMessage());

    // use our shared method to pull out the new node
    parseNodeFromPacketStream(packetStream);
}
Exemplo n.º 8
0
QByteArray LimitedNodeList::constructPingPacket(PingType_t pingType, bool isVerified, const QUuid& packetHeaderID) {
    QByteArray pingPacket = byteArrayWithPopulatedHeader(isVerified ? PacketTypePing : PacketTypeUnverifiedPing,
                                                         packetHeaderID);
    
    QDataStream packetStream(&pingPacket, QIODevice::Append);
    
    packetStream << pingType;
    packetStream << usecTimestampNow();
    
    return pingPacket;
}
Exemplo n.º 9
0
void NodeList::sendAssignment(Assignment& assignment) {
 
    PacketType assignmentPacketType = assignment.getCommand() == Assignment::CreateCommand
        ? PacketType::CreateAssignment
        : PacketType::RequestAssignment;

    auto assignmentPacket = NLPacket::create(assignmentPacketType);
    
    QDataStream packetStream(assignmentPacket.get());
    packetStream << assignment;
    
    sendPacket(std::move(assignmentPacket), _assignmentServerSocket);
}
Exemplo n.º 10
0
void NodeList::sendAssignment(Assignment& assignment) {
    
    PacketType assignmentPacketType = assignment.getCommand() == Assignment::CreateCommand
        ? PacketTypeCreateAssignment
        : PacketTypeRequestAssignment;
    
    QByteArray packet = byteArrayWithPopulatedHeader(assignmentPacketType);
    QDataStream packetStream(&packet, QIODevice::Append);
    
    packetStream << assignment;

    _nodeSocket.writeDatagram(packet, _assignmentServerSocket.getAddress(), _assignmentServerSocket.getPort());
}
Exemplo n.º 11
0
int NodeList::processDomainServerList(const QByteArray& packet) {
    // this is a packet from the domain server, reset the count of un-replied check-ins
    _numNoReplyDomainCheckIns = 0;
    
    // if this was the first domain-server list from this domain, we've now connected
    if (!_domainHandler.isConnected()) {
        _domainHandler.setUUID(uuidFromPacketHeader(packet));
        _domainHandler.setIsConnected(true);
    }

    int readNodes = 0;
    
    // setup variables to read into from QDataStream
    qint8 nodeType;
    
    QUuid nodeUUID, connectionUUID;

    HifiSockAddr nodePublicSocket;
    HifiSockAddr nodeLocalSocket;
    
    QDataStream packetStream(packet);
    packetStream.skipRawData(numBytesForPacketHeader(packet));
    
    // pull our owner UUID from the packet, it's always the first thing
    QUuid newUUID;
    packetStream >> newUUID;
    setSessionUUID(newUUID);
    
    // pull each node in the packet
    while(packetStream.device()->pos() < packet.size()) {
        packetStream >> nodeType >> nodeUUID >> nodePublicSocket >> nodeLocalSocket;

        // if the public socket address is 0 then it's reachable at the same IP
        // as the domain server
        if (nodePublicSocket.getAddress().isNull()) {
            nodePublicSocket.setAddress(_domainHandler.getIP());
        }

        SharedNodePointer node = addOrUpdateNode(nodeUUID, nodeType, nodePublicSocket, nodeLocalSocket);
        
        packetStream >> connectionUUID;
        node->setConnectionSecret(connectionUUID);
    }
    
    // ping inactive nodes in conjunction with receipt of list from domain-server
    // this makes it happen every second and also pings any newly added nodes
    pingInactiveNodes();

    return readNodes;
}
Exemplo n.º 12
0
int PositionalAudioRingBuffer::parsePositionalData(const QByteArray& positionalByteArray) {
    QDataStream packetStream(positionalByteArray);

    packetStream.readRawData(reinterpret_cast<char*>(&_position), sizeof(_position));
    packetStream.readRawData(reinterpret_cast<char*>(&_orientation), sizeof(_orientation));

    // if this node sent us a NaN for first float in orientation then don't consider this good audio and bail
    if (glm::isnan(_orientation.x)) {
        reset();
        return 0;
    }

    return packetStream.device()->pos();
}
Exemplo n.º 13
0
void DomainGatekeeper::processConnectRequestPacket(QSharedPointer<ReceivedMessage> message) {
    if (message->getSize() == 0) {
        return;
    }
    
    QDataStream packetStream(message->getMessage());

    // read a NodeConnectionData object from the packet so we can pass around this data while we're inspecting it
    NodeConnectionData nodeConnection = NodeConnectionData::fromDataStream(packetStream, message->getSenderSockAddr());

    QByteArray myProtocolVersion = protocolVersionsSignature();
    if (nodeConnection.protocolVersion != myProtocolVersion) {
        sendProtocolMismatchConnectionDenial(message->getSenderSockAddr());
        return;
    }

    if (nodeConnection.localSockAddr.isNull() || nodeConnection.publicSockAddr.isNull()) {
        qDebug() << "Unexpected data received for node local socket or public socket. Will not allow connection.";
        return;
    }

    static const NodeSet VALID_NODE_TYPES {
        NodeType::AudioMixer, NodeType::AvatarMixer, NodeType::AssetServer, NodeType::EntityServer, NodeType::Agent, NodeType::MessagesMixer, NodeType::EntityScriptServer
    };

    if (!VALID_NODE_TYPES.contains(nodeConnection.nodeType)) {
        qDebug() << "Received an invalid node type with connect request. Will not allow connection from"
            << nodeConnection.senderSockAddr << ": " << nodeConnection.nodeType;
        return;
    }

    // check if this connect request matches an assignment in the queue
    auto pendingAssignment = _pendingAssignedNodes.find(nodeConnection.connectUUID);

    SharedNodePointer node;

    if (pendingAssignment != _pendingAssignedNodes.end()) {
        node = processAssignmentConnectRequest(nodeConnection, pendingAssignment->second);
    } else if (!STATICALLY_ASSIGNED_NODES.contains(nodeConnection.nodeType)) {
        QString username;
        QByteArray usernameSignature;

        if (message->getBytesLeftToRead() > 0) {
            // read username from packet
            packetStream >> username;

            if (message->getBytesLeftToRead() > 0) {
                // read user signature from packet
                packetStream >> usernameSignature;
            }
Exemplo n.º 14
0
void HandshakeResponder::responderParseStarterHello(){ //R:1 parse
    QByteArray packet;
    m_socketStream >> packet;
    QDataStream packetStream(&packet, QIODevice::ReadOnly);

    if(isError(packet)) return;

    quint8 secLevel;
    packetStream >> secLevel;
    if(static_cast<SecurityLevel>(secLevel) != PreSharedIdentity){
        processError(BadSecurityLevel);
        return;
    }

    QByteArray rsaCypherText;
    packetStream >> rsaCypherText;
    QByteArray clearText = rsaDecrypt(rsaCypherText);
    if(clearText.isEmpty()){
        processError(DataCorrupted);
        return;
    }
    QDataStream clearTextStream(&clearText, QIODevice::ReadOnly);
    QByteArray key;
    clearTextStream >> key;
    m_contact = m_contactDB->findByKey(key);
    if(m_contact == NULL){
        processError(IdentityCheckFailed);
        return;
    }
    try{
        m_rsaEncryptor.AccessKey().Load(ArraySource((byte*)m_contact->getKey().data(),
                                                    m_contact->getKey().size(),
                                                    true));
    }catch(CryptoPP::BERDecodeErr&){
        processError(BadContactKey);
    }

    quint8 version;
    clearTextStream >> version;
    if((version & 0xF0) != (SUPPORTED_PROTOCOL_VERSION & 0xF0)){
        processError(IncompatibleProtocolVersions);
        return;
    }

    updateIntegrityHash(&m_starterIntegrityHash, (char)secLevel+clearText);
    responderRespondHello();
}
Exemplo n.º 15
0
void NodeList::activateSocketFromNodeCommunication(const QByteArray& packet, const SharedNodePointer& sendingNode) {
    // deconstruct this ping packet to see if it is a public or local reply
    QDataStream packetStream(packet);
    packetStream.skipRawData(numBytesForPacketHeader(packet));
    
    quint8 pingType;
    packetStream >> pingType;
    
    // if this is a local or public ping then we can activate a socket
    // we do nothing with agnostic pings, those are simply for timing
    if (pingType == PingType::Local && sendingNode->getActiveSocket() != &sendingNode->getLocalSocket()) {
        sendingNode->activateLocalSocket();
    } else if (pingType == PingType::Public && !sendingNode->getActiveSocket()) {
        sendingNode->activatePublicSocket();
    } else if (pingType == PingType::Symmetric && !sendingNode->getActiveSocket()) {
        sendingNode->activateSymmetricSocket();
    }
}
Exemplo n.º 16
0
void DataServerClient::putValueForKeyAndUserString(const QString& key, const QString& value, const QString& userString) {
    // setup the header for this packet and push packetStream to desired spot
    QByteArray putPacket = byteArrayWithPopulatedHeader(PacketTypeDataServerPut);
    QDataStream packetStream(&putPacket, QIODevice::Append);
    
    // pack our data for the put packet
    packetStream << _sequenceNumber << userString << key << value;
    
    // add the putPacket to our vector of unconfirmed packets, will be deleted once put is confirmed
    _unmatchedPackets.insert(_sequenceNumber, putPacket);
    
    // send this put request to the data server
    NodeList::getInstance()->getNodeSocket().writeDatagram(putPacket, dataServerSockAddr().getAddress(),
                                                           dataServerSockAddr().getPort());
    
    // push the sequence number forwards
    _sequenceNumber++;
}
Exemplo n.º 17
0
void NodeList::processDomainServerList(QSharedPointer<ReceivedMessage> message) {
    if (_domainHandler.getSockAddr().isNull()) {
        // refuse to process this packet if we aren't currently connected to the DS
        return;
    }

    // this is a packet from the domain server, reset the count of un-replied check-ins
    _numNoReplyDomainCheckIns = 0;

    // emit our signal so listeners know we just heard from the DS
    emit receivedDomainServerList();

    DependencyManager::get<NodeList>()->flagTimeForConnectionStep(LimitedNodeList::ConnectionStep::ReceiveDSList);

    QDataStream packetStream(message->getMessage());
    
    // grab the domain's ID from the beginning of the packet
    QUuid domainUUID;
    packetStream >> domainUUID;

    // if this was the first domain-server list from this domain, we've now connected
    if (!_domainHandler.isConnected()) {
        _domainHandler.setUUID(domainUUID);
        _domainHandler.setIsConnected(true);
    }

    // pull our owner UUID from the packet, it's always the first thing
    QUuid newUUID;
    packetStream >> newUUID;
    setSessionUUID(newUUID);

    quint8 isAllowedEditor;
    packetStream >> isAllowedEditor;
    setIsAllowedEditor((bool) isAllowedEditor);

    quint8 thisNodeCanRez;
    packetStream >> thisNodeCanRez;
    setThisNodeCanRez((bool) thisNodeCanRez);
    
    // pull each node in the packet
    while (packetStream.device()->pos() < message->getSize()) {
        parseNodeFromPacketStream(packetStream);
    }
}
Exemplo n.º 18
0
int InjectedAudioStream::parseStreamProperties(PacketType type,
                                               const QByteArray& packetAfterSeqNum,
                                               int& numAudioSamples) {
    // setup a data stream to read from this packet
    QDataStream packetStream(packetAfterSeqNum);

    // skip the stream identifier
    packetStream.skipRawData(NUM_BYTES_RFC4122_UUID);
    
    // read the channel flag
    bool isStereo;
    packetStream >> isStereo;
    
    // if isStereo value has changed, restart the ring buffer with new frame size
    if (isStereo != _isStereo) {
        _ringBuffer.resizeForFrameSize(isStereo
                                       ? AudioConstants::NETWORK_FRAME_SAMPLES_STEREO
                                       : AudioConstants::NETWORK_FRAME_SAMPLES_PER_CHANNEL);
        _isStereo = isStereo;
    }

    // pull the loopback flag and set our boolean
    uchar shouldLoopback;
    packetStream >> shouldLoopback;
    _shouldLoopbackForNode = (shouldLoopback == 1);

    // use parsePositionalData in parent PostionalAudioRingBuffer class to pull common positional data
    packetStream.skipRawData(parsePositionalData(packetAfterSeqNum.mid(packetStream.device()->pos())));

    // pull out the radius for this injected source - if it's zero this is a point source
    packetStream >> _radius;

    quint8 attenuationByte = 0;
    packetStream >> attenuationByte;
    _attenuationRatio = attenuationByte / (float)MAX_INJECTOR_VOLUME;
    
    packetStream >> _ignorePenumbra;
    
    int numAudioBytes = packetAfterSeqNum.size() - packetStream.device()->pos();
    numAudioSamples = numAudioBytes / sizeof(int16_t);

    return packetStream.device()->pos();
}
Exemplo n.º 19
0
void DataServerClient::getValuesForKeysAndUserString(const QStringList& keys, const QString& userString,
                                                   DataServerCallbackObject* callbackObject) {
    if (!userString.isEmpty() && keys.size() <= UCHAR_MAX) {
        QByteArray getPacket = byteArrayWithPopulatedHeader(PacketTypeDataServerGet);
        QDataStream packetStream(&getPacket, QIODevice::Append);
        
        // pack our data for the getPacket
        packetStream << _sequenceNumber << userString << keys.join(MULTI_KEY_VALUE_SEPARATOR);
        
        // add the getPacket to our map of unconfirmed packets, will be deleted once we get a response from the nameserver
        _unmatchedPackets.insert(_sequenceNumber, getPacket);
        _callbackObjects.insert(_sequenceNumber, callbackObject);
        
        // send the get to the data server
        NodeList::getInstance()->getNodeSocket().writeDatagram(getPacket, dataServerSockAddr().getAddress(),
                                                               dataServerSockAddr().getPort());
        _sequenceNumber++;
    }
}
Exemplo n.º 20
0
QByteArray LimitedNodeList::constructPingReplyPacket(const QByteArray& pingPacket, const QUuid& packetHeaderID) {
    QDataStream pingPacketStream(pingPacket);
    pingPacketStream.skipRawData(numBytesForPacketHeader(pingPacket));
    
    PingType_t typeFromOriginalPing;
    pingPacketStream >> typeFromOriginalPing;
    
    quint64 timeFromOriginalPing;
    pingPacketStream >> timeFromOriginalPing;
    
    PacketType replyType = (packetTypeForPacket(pingPacket) == PacketTypePing)
        ? PacketTypePingReply : PacketTypeUnverifiedPingReply;
    
    QByteArray replyPacket = byteArrayWithPopulatedHeader(replyType, packetHeaderID);
    QDataStream packetStream(&replyPacket, QIODevice::Append);
    
    packetStream << typeFromOriginalPing << timeFromOriginalPing << usecTimestampNow();
    
    return replyPacket;
}
Exemplo n.º 21
0
void DataServerClient::processSendFromDataServer(const QByteArray& packet) {
    // pull the user string from the packet so we know who to associate this with
    QDataStream packetStream(packet);
    packetStream.skipRawData(numBytesForPacketHeader(packet));
    
    quint8 sequenceNumber = 0;
    packetStream >> sequenceNumber;
    
    if (_callbackObjects.find(sequenceNumber) != _callbackObjects.end()) {
        // remove the packet from our two maps, it's matched
        DataServerCallbackObject* callbackObject = _callbackObjects.take(sequenceNumber);
        _unmatchedPackets.remove(sequenceNumber);
        
        QString userString, keyListString, valueListString;
        
        packetStream >> userString >> keyListString >> valueListString;
        
        callbackObject->processDataServerResponse(userString, keyListString.split(MULTI_KEY_VALUE_SEPARATOR),
                                                  valueListString.split(MULTI_KEY_VALUE_SEPARATOR));
    }
Exemplo n.º 22
0
void NodeList::activateSocketFromNodeCommunication(ReceivedMessage& message, const SharedNodePointer& sendingNode) {
    // deconstruct this ping packet to see if it is a public or local reply
    QDataStream packetStream(message.getMessage());

    quint8 pingType;
    packetStream >> pingType;

    // if this is a local or public ping then we can activate a socket
    // we do nothing with agnostic pings, those are simply for timing
    if (pingType == PingType::Local && sendingNode->getActiveSocket() != &sendingNode->getLocalSocket()) {
        sendingNode->activateLocalSocket();
    } else if (pingType == PingType::Public && !sendingNode->getActiveSocket()) {
        sendingNode->activatePublicSocket();
    } else if (pingType == PingType::Symmetric && !sendingNode->getActiveSocket()) {
        sendingNode->activateSymmetricSocket();
    }

    if (sendingNode->getType() == NodeType::AudioMixer) {
       flagTimeForConnectionStep(LimitedNodeList::ConnectionStep::SetAudioMixerSocket);
    }
}
Exemplo n.º 23
0
void DataServer::readPendingDatagrams() {
    QByteArray receivedPacket;
    HifiSockAddr senderSockAddr;
    
    while (_socket.hasPendingDatagrams()) {
        receivedPacket.resize(_socket.pendingDatagramSize());
        _socket.readDatagram(receivedPacket.data(), _socket.pendingDatagramSize(),
                             senderSockAddr.getAddressPointer(), senderSockAddr.getPortPointer());
        
        PacketType requestType = packetTypeForPacket(receivedPacket);
        
        if ((requestType == PacketTypeDataServerPut || requestType == PacketTypeDataServerGet) &&
            receivedPacket[numBytesArithmeticCodingFromBuffer(receivedPacket.data())] == versionForPacketType(requestType)) {
            
            QDataStream packetStream(receivedPacket);
            int numReceivedHeaderBytes = numBytesForPacketHeader(receivedPacket);
            packetStream.skipRawData(numReceivedHeaderBytes);
            
            // pull the sequence number used for this packet
            quint8 sequenceNumber = 0;
            
            packetStream >> sequenceNumber;
            
            // pull the UUID that we will need as part of the key
            QString userString;
            packetStream >> userString;
            QUuid parsedUUID(userString);
            
            if (parsedUUID.isNull()) {
                // we failed to parse a UUID, this means the user has sent us a username
                
                // ask redis for the UUID for this user
                redisReply* reply = (redisReply*) redisCommand(_redis, "GET user:%s", qPrintable(userString));
                
                if (reply->type == REDIS_REPLY_STRING) {
                    parsedUUID = QUuid(QString(reply->str));
                }
                
                if (!parsedUUID.isNull()) {
                    qDebug() << "Found UUID" << parsedUUID << "for username" << userString;
                } else {
                    qDebug() << "Failed UUID lookup for username" << userString;
                }
                
                freeReplyObject(reply);
                reply = NULL;
            }
            
            if (!parsedUUID.isNull()) {
                if (requestType == PacketTypeDataServerPut) {
                    
                    // pull the key and value that specifies the data the user is putting/getting
                    QString dataKey, dataValue;
                    
                    packetStream >> dataKey >> dataValue;
                    
                    qDebug("Sending command to redis: SET uuid:%s:%s %s",
                           qPrintable(uuidStringWithoutCurlyBraces(parsedUUID)),
                           qPrintable(dataKey), qPrintable(dataValue));
                    
                    redisReply* reply = (redisReply*) redisCommand(_redis, "SET uuid:%s:%s %s",
                                                                   qPrintable(uuidStringWithoutCurlyBraces(parsedUUID)),
                                                                   qPrintable(dataKey), qPrintable(dataValue));
                    
                    if (reply->type == REDIS_REPLY_STATUS && strcmp("OK", reply->str) == 0) {
                        // if redis stored the value successfully reply back with a confirm
                        // which is a reply packet with the sequence number
                        QByteArray replyPacket = byteArrayWithPopluatedHeader(PacketTypeDataServerConfirm, _uuid);
                        
                        replyPacket.append(sequenceNumber);
                        
                        _socket.writeDatagram(replyPacket, senderSockAddr.getAddress(), senderSockAddr.getPort());
                    }
                    
                    freeReplyObject(reply);
                } else {
                    // setup a send packet with the returned data
                    // leverage the packetData sent by overwriting and appending
                    QByteArray sendPacket = byteArrayWithPopluatedHeader(PacketTypeDataServerSend, _uuid);
                    QDataStream sendPacketStream(&sendPacket, QIODevice::Append);
                    
                    sendPacketStream << sequenceNumber;
                    
                    // pull the key list that specifies the data the user is putting/getting
                    QString keyListString;
                    packetStream >> keyListString;
                    
                    if (keyListString != "uuid") {
                        
                        // copy the parsed UUID
                        sendPacketStream << uuidStringWithoutCurlyBraces(parsedUUID);
                        
                        const char MULTI_KEY_VALUE_SEPARATOR = '|';
                        
                        // append the keyListString back to the sendPacket
                        sendPacketStream << keyListString;
                        
                        QStringList keyList = keyListString.split(MULTI_KEY_VALUE_SEPARATOR);
                        QStringList valueList;
                        
                        foreach (const QString& dataKey, keyList) {
                            qDebug("Sending command to redis: GET uuid:%s:%s",
                                   qPrintable(uuidStringWithoutCurlyBraces(parsedUUID)),
                                   qPrintable(dataKey));
                            redisReply* reply = (redisReply*) redisCommand(_redis, "GET uuid:%s:%s",
                                                                           qPrintable(uuidStringWithoutCurlyBraces(parsedUUID)),
                                                                           qPrintable(dataKey));
                            
                            if (reply->len) {
                                // copy the value that redis returned
                                valueList << QString(reply->str);
                            } else {
                                // didn't find a value - insert a space
                                valueList << QChar(' ');
                            }
                            
                            freeReplyObject(reply);
                        }
                        
                        // append the value QStringList using the right separator
                        sendPacketStream << valueList.join(MULTI_KEY_VALUE_SEPARATOR);
                    } else {
Exemplo n.º 24
0
void ScriptEngine::run() {
    // TODO: can we add a short circuit for _stoppingAllScripts here? What does it mean to not start running if
    // we're in the process of stopping?

    if (!_isInitialized) {
        init();
    }
    _isRunning = true;
    _isFinished = false;
    emit runningStateChanged();

    QScriptValue result = evaluate(_scriptContents);

    QElapsedTimer startTime;
    startTime.start();

    int thisFrame = 0;

    auto nodeList = DependencyManager::get<NodeList>();
    auto entityScriptingInterface = DependencyManager::get<EntityScriptingInterface>();

    qint64 lastUpdate = usecTimestampNow();

    while (!_isFinished) {
        int usecToSleep = (thisFrame++ * SCRIPT_DATA_CALLBACK_USECS) - startTime.nsecsElapsed() / 1000; // nsec to usec
        if (usecToSleep > 0) {
            usleep(usecToSleep);
        }

        if (_isFinished) {
            break;
        }

        QCoreApplication::processEvents();

        if (_isFinished) {
            break;
        }

        if (!_isFinished && entityScriptingInterface->getEntityPacketSender()->serversExist()) {
            // release the queue of edit entity messages.
            entityScriptingInterface->getEntityPacketSender()->releaseQueuedMessages();

            // since we're in non-threaded mode, call process so that the packets are sent
            if (!entityScriptingInterface->getEntityPacketSender()->isThreaded()) {
                entityScriptingInterface->getEntityPacketSender()->process();
            }
        }

        if (!_isFinished && _isAvatar && _avatarData) {

            const int SCRIPT_AUDIO_BUFFER_SAMPLES = floor(((SCRIPT_DATA_CALLBACK_USECS * AudioConstants::SAMPLE_RATE)
                                                           / (1000 * 1000)) + 0.5);
            const int SCRIPT_AUDIO_BUFFER_BYTES = SCRIPT_AUDIO_BUFFER_SAMPLES * sizeof(int16_t);

            QByteArray avatarPacket = byteArrayWithPopulatedHeader(PacketTypeAvatarData);
            avatarPacket.append(_avatarData->toByteArray());

            nodeList->broadcastToNodes(avatarPacket, NodeSet() << NodeType::AvatarMixer);

            if (_isListeningToAudioStream || _avatarSound) {
                // if we have an avatar audio stream then send it out to our audio-mixer
                bool silentFrame = true;

                int16_t numAvailableSamples = SCRIPT_AUDIO_BUFFER_SAMPLES;
                const int16_t* nextSoundOutput = NULL;

                if (_avatarSound) {

                    const QByteArray& soundByteArray = _avatarSound->getByteArray();
                    nextSoundOutput = reinterpret_cast<const int16_t*>(soundByteArray.data()
                                                                       + _numAvatarSoundSentBytes);

                    int numAvailableBytes = (soundByteArray.size() - _numAvatarSoundSentBytes) > SCRIPT_AUDIO_BUFFER_BYTES
                        ? SCRIPT_AUDIO_BUFFER_BYTES
                        : soundByteArray.size() - _numAvatarSoundSentBytes;
                    numAvailableSamples = numAvailableBytes / sizeof(int16_t);


                    // check if the all of the _numAvatarAudioBufferSamples to be sent are silence
                    for (int i = 0; i < numAvailableSamples; ++i) {
                        if (nextSoundOutput[i] != 0) {
                            silentFrame = false;
                            break;
                        }
                    }

                    _numAvatarSoundSentBytes += numAvailableBytes;
                    if (_numAvatarSoundSentBytes == soundByteArray.size()) {
                        // we're done with this sound object - so set our pointer back to NULL
                        // and our sent bytes back to zero
                        _avatarSound = NULL;
                        _numAvatarSoundSentBytes = 0;
                    }
                }
                
                QByteArray audioPacket = byteArrayWithPopulatedHeader(silentFrame
                                                                      ? PacketTypeSilentAudioFrame
                                                                      : PacketTypeMicrophoneAudioNoEcho);

                QDataStream packetStream(&audioPacket, QIODevice::Append);

                // pack a placeholder value for sequence number for now, will be packed when destination node is known
                int numPreSequenceNumberBytes = audioPacket.size();
                packetStream << (quint16) 0;

                if (silentFrame) {
                    if (!_isListeningToAudioStream) {
                        // if we have a silent frame and we're not listening then just send nothing and break out of here
                        break;
                    }

                    // write the number of silent samples so the audio-mixer can uphold timing
                    packetStream.writeRawData(reinterpret_cast<const char*>(&SCRIPT_AUDIO_BUFFER_SAMPLES), sizeof(int16_t));

                    // use the orientation and position of this avatar for the source of this audio
                    packetStream.writeRawData(reinterpret_cast<const char*>(&_avatarData->getPosition()), sizeof(glm::vec3));
                    glm::quat headOrientation = _avatarData->getHeadOrientation();
                    packetStream.writeRawData(reinterpret_cast<const char*>(&headOrientation), sizeof(glm::quat));

                } else if (nextSoundOutput) {
                    // assume scripted avatar audio is mono and set channel flag to zero
                    packetStream << (quint8)0;

                    // use the orientation and position of this avatar for the source of this audio
                    packetStream.writeRawData(reinterpret_cast<const char*>(&_avatarData->getPosition()), sizeof(glm::vec3));
                    glm::quat headOrientation = _avatarData->getHeadOrientation();
                    packetStream.writeRawData(reinterpret_cast<const char*>(&headOrientation), sizeof(glm::quat));

                    // write the raw audio data
                    packetStream.writeRawData(reinterpret_cast<const char*>(nextSoundOutput), numAvailableSamples * sizeof(int16_t));
                }
                
                // write audio packet to AudioMixer nodes
                auto nodeList = DependencyManager::get<NodeList>();
                nodeList->eachNode([this, &nodeList, &audioPacket, &numPreSequenceNumberBytes](const SharedNodePointer& node){
                    // only send to nodes of type AudioMixer
                    if (node->getType() == NodeType::AudioMixer) {
                        // pack sequence number
                        quint16 sequence = _outgoingScriptAudioSequenceNumbers[node->getUUID()]++;
                        memcpy(audioPacket.data() + numPreSequenceNumberBytes, &sequence, sizeof(quint16));
                        
                        // send audio packet
                        nodeList->writeDatagram(audioPacket, node);
                    }
                });
            }
        }

        qint64 now = usecTimestampNow();
        float deltaTime = (float) (now - lastUpdate) / (float) USECS_PER_SECOND;

        if (hasUncaughtException()) {
            int line = uncaughtExceptionLineNumber();
            qCDebug(scriptengine) << "Uncaught exception at (" << _fileNameString << ") line" << line << ":" << uncaughtException().toString();
            emit errorMessage("Uncaught exception at (" + _fileNameString + ") line" + QString::number(line) + ":" + uncaughtException().toString());
            clearExceptions();
        }

        if (!_isFinished) {
            emit update(deltaTime);
        }
        lastUpdate = now;
        
    }

    stopAllTimers(); // make sure all our timers are stopped if the script is ending
    emit scriptEnding();

    // kill the avatar identity timer
    delete _avatarIdentityTimer;

    if (entityScriptingInterface->getEntityPacketSender()->serversExist()) {
        // release the queue of edit entity messages.
        entityScriptingInterface->getEntityPacketSender()->releaseQueuedMessages();

        // since we're in non-threaded mode, call process so that the packets are sent
        if (!entityScriptingInterface->getEntityPacketSender()->isThreaded()) {
            entityScriptingInterface->getEntityPacketSender()->process();
        }
    }

    // If we were on a thread, then wait till it's done
    if (thread()) {
        thread()->quit();
    }

    emit finished(_fileNameString);

    _isRunning = false;
    emit runningStateChanged();

    emit doneRunning();

    _doneRunningThisScript = true;
}
Exemplo n.º 25
0
void AudioInjector::injectAudio() {
    
    QByteArray soundByteArray = _sound->getByteArray();
    
    // make sure we actually have samples downloaded to inject
    if (soundByteArray.size()) {
        // give our sample byte array to the local audio interface, if we have it, so it can be handled locally
        if (_options.getLoopbackAudioInterface()) {
            // assume that localAudioInterface could be on a separate thread, use Qt::AutoConnection to handle properly
            QMetaObject::invokeMethod(_options.getLoopbackAudioInterface(), "handleAudioByteArray",
                                      Qt::AutoConnection,
                                      Q_ARG(QByteArray, soundByteArray));
            
        }
        
        NodeList* nodeList = NodeList::getInstance();
        
        // setup the packet for injected audio
        QByteArray injectAudioPacket = byteArrayWithPopulatedHeader(PacketTypeInjectAudio);
        QDataStream packetStream(&injectAudioPacket, QIODevice::Append);
        
        packetStream << QUuid::createUuid();
        
        // pack the flag for loopback
        uchar loopbackFlag = (uchar) (!_options.getLoopbackAudioInterface());
        packetStream << loopbackFlag;
        
        // pack the position for injected audio
        packetStream.writeRawData(reinterpret_cast<const char*>(&_options.getPosition()), sizeof(_options.getPosition()));
        
        // pack our orientation for injected audio
        packetStream.writeRawData(reinterpret_cast<const char*>(&_options.getOrientation()), sizeof(_options.getOrientation()));
        
        // pack zero for radius
        float radius = 0;
        packetStream << radius;
        
        // pack 255 for attenuation byte
        quint8 volume = MAX_INJECTOR_VOLUME * _options.getVolume();
        packetStream << volume;
        
        QElapsedTimer timer;
        timer.start();
        int nextFrame = 0;
        
        int currentSendPosition = 0;
        
        int numPreAudioDataBytes = injectAudioPacket.size();
        
        // loop to send off our audio in NETWORK_BUFFER_LENGTH_SAMPLES_PER_CHANNEL byte chunks
        while (currentSendPosition < soundByteArray.size() && !_shouldStop) {
            
            int bytesToCopy = std::min(NETWORK_BUFFER_LENGTH_BYTES_PER_CHANNEL,
                                       soundByteArray.size() - currentSendPosition);
            
            // resize the QByteArray to the right size
            injectAudioPacket.resize(numPreAudioDataBytes + bytesToCopy);
            
            // copy the next NETWORK_BUFFER_LENGTH_BYTES_PER_CHANNEL bytes to the packet
            memcpy(injectAudioPacket.data() + numPreAudioDataBytes, soundByteArray.data() + currentSendPosition, bytesToCopy);
            
            // grab our audio mixer from the NodeList, if it exists
            SharedNodePointer audioMixer = nodeList->soloNodeOfType(NodeType::AudioMixer);
            
            // send off this audio packet
            nodeList->writeDatagram(injectAudioPacket, audioMixer);
            
            currentSendPosition += bytesToCopy;
            
            // send two packets before the first sleep so the mixer can start playback right away
            
            if (currentSendPosition != bytesToCopy && currentSendPosition < soundByteArray.size()) {
                // not the first packet and not done
                // sleep for the appropriate time
                int usecToSleep = (++nextFrame * BUFFER_SEND_INTERVAL_USECS) - timer.nsecsElapsed() / 1000;
                
                if (usecToSleep > 0) {
                    usleep(usecToSleep);
                }
            }
        }
    }
    
    emit finished();
}
Exemplo n.º 26
0
void AudioInjector::injectToMixer() {
    if (_currentSendPosition < 0 ||
        _currentSendPosition >= _audioData.size()) {
        _currentSendPosition = 0;
    }

    auto nodeList = DependencyManager::get<NodeList>();

    // make sure we actually have samples downloaded to inject
    if (_audioData.size()) {

        // setup the packet for injected audio
        QByteArray injectAudioPacket = nodeList->byteArrayWithPopulatedHeader(PacketTypeInjectAudio);
        QDataStream packetStream(&injectAudioPacket, QIODevice::Append);

        // pack some placeholder sequence number for now
        int numPreSequenceNumberBytes = injectAudioPacket.size();
        packetStream << (quint16)0;

        // pack stream identifier (a generated UUID)
        packetStream << QUuid::createUuid();

        // pack the stereo/mono type of the stream
        packetStream << _options.stereo;

        // pack the flag for loopback
        uchar loopbackFlag = (uchar) true;
        packetStream << loopbackFlag;

        // pack the position for injected audio
        int positionOptionOffset = injectAudioPacket.size();
        packetStream.writeRawData(reinterpret_cast<const char*>(&_options.position),
                                  sizeof(_options.position));

        // pack our orientation for injected audio
        int orientationOptionOffset = injectAudioPacket.size();
        packetStream.writeRawData(reinterpret_cast<const char*>(&_options.orientation),
                                  sizeof(_options.orientation));

        // pack zero for radius
        float radius = 0;
        packetStream << radius;

        // pack 255 for attenuation byte
        int volumeOptionOffset = injectAudioPacket.size();
        quint8 volume = MAX_INJECTOR_VOLUME * _options.volume;
        packetStream << volume;

        packetStream << _options.ignorePenumbra;

        QElapsedTimer timer;
        timer.start();
        int nextFrame = 0;

        int numPreAudioDataBytes = injectAudioPacket.size();
        bool shouldLoop = _options.loop;

        // loop to send off our audio in NETWORK_BUFFER_LENGTH_SAMPLES_PER_CHANNEL byte chunks
        quint16 outgoingInjectedAudioSequenceNumber = 0;
        while (_currentSendPosition < _audioData.size() && !_shouldStop) {

            int bytesToCopy = std::min(((_options.stereo) ? 2 : 1) * AudioConstants::NETWORK_FRAME_BYTES_PER_CHANNEL,
                                       _audioData.size() - _currentSendPosition);

            //  Measure the loudness of this frame
            _loudness = 0.0f;
            for (int i = 0; i < bytesToCopy; i += sizeof(int16_t)) {
                _loudness += abs(*reinterpret_cast<int16_t*>(_audioData.data() + _currentSendPosition + i)) /
                (AudioConstants::MAX_SAMPLE_VALUE / 2.0f);
            }
            _loudness /= (float)(bytesToCopy / sizeof(int16_t));

            memcpy(injectAudioPacket.data() + positionOptionOffset,
                   &_options.position,
                   sizeof(_options.position));
            memcpy(injectAudioPacket.data() + orientationOptionOffset,
                   &_options.orientation,
                   sizeof(_options.orientation));
            volume = MAX_INJECTOR_VOLUME * _options.volume;
            memcpy(injectAudioPacket.data() + volumeOptionOffset, &volume, sizeof(volume));

            // resize the QByteArray to the right size
            injectAudioPacket.resize(numPreAudioDataBytes + bytesToCopy);

            // pack the sequence number
            memcpy(injectAudioPacket.data() + numPreSequenceNumberBytes,
                   &outgoingInjectedAudioSequenceNumber, sizeof(quint16));

            // copy the next NETWORK_BUFFER_LENGTH_BYTES_PER_CHANNEL bytes to the packet
            memcpy(injectAudioPacket.data() + numPreAudioDataBytes,
                   _audioData.data() + _currentSendPosition, bytesToCopy);

            // grab our audio mixer from the NodeList, if it exists
            SharedNodePointer audioMixer = nodeList->soloNodeOfType(NodeType::AudioMixer);

            // send off this audio packet
            nodeList->writeDatagram(injectAudioPacket, audioMixer);
            outgoingInjectedAudioSequenceNumber++;

            _currentSendPosition += bytesToCopy;

            // send two packets before the first sleep so the mixer can start playback right away

            if (_currentSendPosition != bytesToCopy && _currentSendPosition < _audioData.size()) {

                // process events in case we have been told to stop and be deleted
                QCoreApplication::processEvents();

                if (_shouldStop) {
                    break;
                }

                // not the first packet and not done
                // sleep for the appropriate time
                int usecToSleep = (++nextFrame * AudioConstants::NETWORK_FRAME_USECS) - timer.nsecsElapsed() / 1000;

                if (usecToSleep > 0) {
                    usleep(usecToSleep);
                }
            }

            if (shouldLoop && _currentSendPosition >= _audioData.size()) {
                _currentSendPosition = 0;
            }
        }
    }

    setIsFinished(true);
}
Exemplo n.º 27
0
void NodeList::sendDomainServerCheckIn() {
    if (_isShuttingDown) {
        qCDebug(networking) << "Refusing to send a domain-server check in while shutting down.";
        return;
    }
    
    if (_publicSockAddr.isNull()) {
        // we don't know our public socket and we need to send it to the domain server
        qCDebug(networking) << "Waiting for inital public socket from STUN. Will not send domain-server check in.";
    } else if (_domainHandler.getIP().isNull() && _domainHandler.requiresICE()) {
        qCDebug(networking) << "Waiting for ICE discovered domain-server socket. Will not send domain-server check in.";
        handleICEConnectionToDomainServer();
    } else if (!_domainHandler.getIP().isNull()) {
        bool isUsingDTLS = false;

        PacketType domainPacketType = !_domainHandler.isConnected()
            ? PacketType::DomainConnectRequest : PacketType::DomainListRequest;

        if (!_domainHandler.isConnected()) {
            qCDebug(networking) << "Sending connect request to domain-server at" << _domainHandler.getHostname();

            // is this our localhost domain-server?
            // if so we need to make sure we have an up-to-date local port in case it restarted

            if (_domainHandler.getSockAddr().getAddress() == QHostAddress::LocalHost
                || _domainHandler.getHostname() == "localhost") {

                quint16 domainPort = DEFAULT_DOMAIN_SERVER_PORT;
                getLocalServerPortFromSharedMemory(DOMAIN_SERVER_LOCAL_PORT_SMEM_KEY, domainPort);
                qCDebug(networking) << "Local domain-server port read from shared memory (or default) is" << domainPort;
                _domainHandler.setPort(domainPort);
            }

        }

        // check if we're missing a keypair we need to verify ourselves with the domain-server
        auto& accountManager = AccountManager::getInstance();
        const QUuid& connectionToken = _domainHandler.getConnectionToken();

        // we assume that we're on the same box as the DS if it has the same local address and
        // it didn't present us with a connection token to use for username signature
        bool localhostDomain = _domainHandler.getSockAddr().getAddress() == QHostAddress::LocalHost
            || (_domainHandler.getSockAddr().getAddress() == _localSockAddr.getAddress() && connectionToken.isNull());

        bool requiresUsernameSignature = !_domainHandler.isConnected() && !connectionToken.isNull() && !localhostDomain;

        if (requiresUsernameSignature && !accountManager.getAccountInfo().hasPrivateKey()) {
            qWarning() << "A keypair is required to present a username signature to the domain-server"
                << "but no keypair is present. Waiting for keypair generation to complete.";
            accountManager.generateNewUserKeypair();

            // don't send the check in packet - wait for the keypair first
            return;
        }

        auto domainPacket = NLPacket::create(domainPacketType);
        
        QDataStream packetStream(domainPacket.get());

        if (domainPacketType == PacketType::DomainConnectRequest) {
            QUuid connectUUID;

            if (!_domainHandler.getAssignmentUUID().isNull()) {
                // this is a connect request and we're an assigned node
                // so set our packetUUID as the assignment UUID
                connectUUID = _domainHandler.getAssignmentUUID();
            } else if (_domainHandler.requiresICE()) {
                // this is a connect request and we're an interface client
                // that used ice to discover the DS
                // so send our ICE client UUID with the connect request
                connectUUID = _domainHandler.getICEClientID();
            }

            // pack the connect UUID for this connect request
            packetStream << connectUUID;
        }

        // pack our data to send to the domain-server
        packetStream << _ownerType << _publicSockAddr << _localSockAddr << _nodeTypesOfInterest.toList();

        if (!_domainHandler.isConnected()) {
            DataServerAccountInfo& accountInfo = accountManager.getAccountInfo();
            packetStream << accountInfo.getUsername();

            // if this is a connect request, and we can present a username signature, send it along
            if (requiresUsernameSignature && accountManager.getAccountInfo().hasPrivateKey()) {
                const QByteArray& usernameSignature = accountManager.getAccountInfo().getUsernameSignature(connectionToken);
                packetStream << usernameSignature;
            }
        }

        flagTimeForConnectionStep(LimitedNodeList::ConnectionStep::SendDSCheckIn);

        if (!isUsingDTLS) {
            sendPacket(std::move(domainPacket), _domainHandler.getSockAddr());
        }

        if (_numNoReplyDomainCheckIns >= MAX_SILENT_DOMAIN_SERVER_CHECK_INS) {
            // we haven't heard back from DS in MAX_SILENT_DOMAIN_SERVER_CHECK_INS
            // so emit our signal that says that
            emit limitOfSilentDomainCheckInsReached();
        }

        // increment the count of un-replied check-ins
        _numNoReplyDomainCheckIns++;
    }
}
Exemplo n.º 28
0
void NodeList::sendDomainServerCheckIn() {
    if (_publicSockAddr.isNull() && !_hasCompletedInitialSTUNFailure) {
        // we don't know our public socket and we need to send it to the domain server
        // send a STUN request to figure it out
        sendSTUNRequest();
    } else if (_domainHandler.getIP().isNull() && _domainHandler.requiresICE()) {
        handleICEConnectionToDomainServer();
    } else if (!_domainHandler.getIP().isNull()) {
        
        bool isUsingDTLS = false;
        
        PacketType domainPacketType = !_domainHandler.isConnected()
            ? PacketTypeDomainConnectRequest : PacketTypeDomainListRequest;
        
        if (!_domainHandler.isConnected()) {
            qDebug() << "Sending connect request to domain-server at" << _domainHandler.getHostname();
        }
        
        // construct the DS check in packet
        QUuid packetUUID = _sessionUUID;
        
        if (domainPacketType == PacketTypeDomainConnectRequest) {
            if (!_domainHandler.getAssignmentUUID().isNull()) {
                // this is a connect request and we're an assigned node
                // so set our packetUUID as the assignment UUID
                packetUUID = _domainHandler.getAssignmentUUID();
            } else if (_domainHandler.requiresICE()) {
                // this is a connect request and we're an interface client
                // that used ice to discover the DS
                // so send our ICE client UUID with the connect request
                packetUUID = _domainHandler.getICEClientID();
            }
        }
        
        QByteArray domainServerPacket = byteArrayWithPopulatedHeader(domainPacketType, packetUUID);
        QDataStream packetStream(&domainServerPacket, QIODevice::Append);
        
        // pack our data to send to the domain-server
        packetStream << _ownerType << _publicSockAddr << _localSockAddr << _nodeTypesOfInterest.toList();
        
        
        // if this is a connect request, and we can present a username signature, send it along
        if (!_domainHandler.isConnected()) {
            DataServerAccountInfo& accountInfo = AccountManager::getInstance().getAccountInfo();
            packetStream << accountInfo.getUsername();
            
            const QByteArray& usernameSignature = AccountManager::getInstance().getAccountInfo().getUsernameSignature();
            
            if (!usernameSignature.isEmpty()) {
                qDebug() << "Including username signature in domain connect request.";
                packetStream << usernameSignature;
            }
        }
        
        if (!isUsingDTLS) {
            writeDatagram(domainServerPacket, _domainHandler.getSockAddr(), QUuid());
        }
        
        const int NUM_DOMAIN_SERVER_CHECKINS_PER_STUN_REQUEST = 5;
        static unsigned int numDomainCheckins = 0;
        
        // send a STUN request every Nth domain server check in so we update our public socket, if required
        if (numDomainCheckins++ % NUM_DOMAIN_SERVER_CHECKINS_PER_STUN_REQUEST == 0) {
            sendSTUNRequest();
        }
        
        if (_numNoReplyDomainCheckIns >= MAX_SILENT_DOMAIN_SERVER_CHECK_INS) {
            // we haven't heard back from DS in MAX_SILENT_DOMAIN_SERVER_CHECK_INS
            // so emit our signal that says that
            emit limitOfSilentDomainCheckInsReached();
        }
        
        // increment the count of un-replied check-ins
        _numNoReplyDomainCheckIns++;
    }
}
Exemplo n.º 29
0
void ScriptEngine::run() {
    if (!_isInitialized) {
        init();
    }
    _isRunning = true;
    emit runningStateChanged();

    QScriptValue result = _engine.evaluate(_scriptContents);
    if (_engine.hasUncaughtException()) {
        int line = _engine.uncaughtExceptionLineNumber();

        qDebug() << "Uncaught exception at line" << line << ":" << result.toString();
        emit errorMessage("Uncaught exception at line" + QString::number(line) + ":" + result.toString());
    }

    QElapsedTimer startTime;
    startTime.start();

    int thisFrame = 0;

    NodeList* nodeList = NodeList::getInstance();

    qint64 lastUpdate = usecTimestampNow();

    while (!_isFinished) {
        int usecToSleep = (thisFrame++ * SCRIPT_DATA_CALLBACK_USECS) - startTime.nsecsElapsed() / 1000; // nsec to usec
        if (usecToSleep > 0) {
            usleep(usecToSleep);
        }

        if (_isFinished) {
            break;
        }

        QCoreApplication::processEvents();

        if (_isFinished) {
            break;
        }

        if (_voxelsScriptingInterface.getVoxelPacketSender()->serversExist()) {
            // release the queue of edit voxel messages.
            _voxelsScriptingInterface.getVoxelPacketSender()->releaseQueuedMessages();

            // since we're in non-threaded mode, call process so that the packets are sent
            if (!_voxelsScriptingInterface.getVoxelPacketSender()->isThreaded()) {
                _voxelsScriptingInterface.getVoxelPacketSender()->process();
            }
        }

        if (_particlesScriptingInterface.getParticlePacketSender()->serversExist()) {
            // release the queue of edit voxel messages.
            _particlesScriptingInterface.getParticlePacketSender()->releaseQueuedMessages();

            // since we're in non-threaded mode, call process so that the packets are sent
            if (!_particlesScriptingInterface.getParticlePacketSender()->isThreaded()) {
                _particlesScriptingInterface.getParticlePacketSender()->process();
            }
        }

        if (_modelsScriptingInterface.getModelPacketSender()->serversExist()) {
            // release the queue of edit voxel messages.
            _modelsScriptingInterface.getModelPacketSender()->releaseQueuedMessages();

            // since we're in non-threaded mode, call process so that the packets are sent
            if (!_modelsScriptingInterface.getModelPacketSender()->isThreaded()) {
                _modelsScriptingInterface.getModelPacketSender()->process();
            }
        }

        if (_isAvatar && _avatarData) {

            const int SCRIPT_AUDIO_BUFFER_SAMPLES = floor(((SCRIPT_DATA_CALLBACK_USECS * SAMPLE_RATE) / (1000 * 1000)) + 0.5);
            const int SCRIPT_AUDIO_BUFFER_BYTES = SCRIPT_AUDIO_BUFFER_SAMPLES * sizeof(int16_t);

            QByteArray avatarPacket = byteArrayWithPopulatedHeader(PacketTypeAvatarData);
            avatarPacket.append(_avatarData->toByteArray());

            nodeList->broadcastToNodes(avatarPacket, NodeSet() << NodeType::AvatarMixer);

            if (_isListeningToAudioStream || _avatarSound) {
                // if we have an avatar audio stream then send it out to our audio-mixer
                bool silentFrame = true;

                int16_t numAvailableSamples = SCRIPT_AUDIO_BUFFER_SAMPLES;
                const int16_t* nextSoundOutput = NULL;

                if (_avatarSound) {

                    const QByteArray& soundByteArray = _avatarSound->getByteArray();
                    nextSoundOutput = reinterpret_cast<const int16_t*>(soundByteArray.data()
                                                                       + _numAvatarSoundSentBytes);

                    int numAvailableBytes = (soundByteArray.size() - _numAvatarSoundSentBytes) > SCRIPT_AUDIO_BUFFER_BYTES
                        ? SCRIPT_AUDIO_BUFFER_BYTES
                        : soundByteArray.size() - _numAvatarSoundSentBytes;
                    numAvailableSamples = numAvailableBytes / sizeof(int16_t);


                    // check if the all of the _numAvatarAudioBufferSamples to be sent are silence
                    for (int i = 0; i < numAvailableSamples; ++i) {
                        if (nextSoundOutput[i] != 0) {
                            silentFrame = false;
                            break;
                        }
                    }

                    _numAvatarSoundSentBytes += numAvailableBytes;
                    if (_numAvatarSoundSentBytes == soundByteArray.size()) {
                        // we're done with this sound object - so set our pointer back to NULL
                        // and our sent bytes back to zero
                        _avatarSound = NULL;
                        _numAvatarSoundSentBytes = 0;
                    }
                }

                QByteArray audioPacket = byteArrayWithPopulatedHeader(silentFrame
                                                                      ? PacketTypeSilentAudioFrame
                                                                      : PacketTypeMicrophoneAudioNoEcho);

                QDataStream packetStream(&audioPacket, QIODevice::Append);

                // use the orientation and position of this avatar for the source of this audio
                packetStream.writeRawData(reinterpret_cast<const char*>(&_avatarData->getPosition()), sizeof(glm::vec3));
                glm::quat headOrientation = _avatarData->getHeadOrientation();
                packetStream.writeRawData(reinterpret_cast<const char*>(&headOrientation), sizeof(glm::quat));

                if (silentFrame) {
                    if (!_isListeningToAudioStream) {
                        // if we have a silent frame and we're not listening then just send nothing and break out of here
                        break;
                    }

                    // write the number of silent samples so the audio-mixer can uphold timing
                    packetStream.writeRawData(reinterpret_cast<const char*>(&SCRIPT_AUDIO_BUFFER_SAMPLES), sizeof(int16_t));
                } else if (nextSoundOutput) {
                    // write the raw audio data
                    packetStream.writeRawData(reinterpret_cast<const char*>(nextSoundOutput),
                                              numAvailableSamples * sizeof(int16_t));
                }

                nodeList->broadcastToNodes(audioPacket, NodeSet() << NodeType::AudioMixer);
            }
        }

        qint64 now = usecTimestampNow();
        float deltaTime = (float) (now - lastUpdate) / (float) USECS_PER_SECOND;
        emit update(deltaTime);
        lastUpdate = now;

        if (_engine.hasUncaughtException()) {
            int line = _engine.uncaughtExceptionLineNumber();
            qDebug() << "Uncaught exception at line" << line << ":" << _engine.uncaughtException().toString();
            emit errorMessage("Uncaught exception at line" + QString::number(line) + ":" + _engine.uncaughtException().toString());
        }
    }
    emit scriptEnding();

    // kill the avatar identity timer
    delete _avatarIdentityTimer;

    if (_voxelsScriptingInterface.getVoxelPacketSender()->serversExist()) {
        // release the queue of edit voxel messages.
        _voxelsScriptingInterface.getVoxelPacketSender()->releaseQueuedMessages();

        // since we're in non-threaded mode, call process so that the packets are sent
        if (!_voxelsScriptingInterface.getVoxelPacketSender()->isThreaded()) {
            _voxelsScriptingInterface.getVoxelPacketSender()->process();
        }
    }

    if (_particlesScriptingInterface.getParticlePacketSender()->serversExist()) {
        // release the queue of edit voxel messages.
        _particlesScriptingInterface.getParticlePacketSender()->releaseQueuedMessages();

        // since we're in non-threaded mode, call process so that the packets are sent
        if (!_particlesScriptingInterface.getParticlePacketSender()->isThreaded()) {
            _particlesScriptingInterface.getParticlePacketSender()->process();
        }
    }

    if (_modelsScriptingInterface.getModelPacketSender()->serversExist()) {
        // release the queue of edit voxel messages.
        _modelsScriptingInterface.getModelPacketSender()->releaseQueuedMessages();

        // since we're in non-threaded mode, call process so that the packets are sent
        if (!_modelsScriptingInterface.getModelPacketSender()->isThreaded()) {
            _modelsScriptingInterface.getModelPacketSender()->process();
        }
    }

    // If we were on a thread, then wait till it's done
    if (thread()) {
        thread()->quit();
    }

    emit finished(_fileNameString);

    _isRunning = false;
    emit runningStateChanged();
}
Exemplo n.º 30
0
void DatagramProcessor::processDatagrams() {

    if (_isShuttingDown) {
        return; // bail early... we're shutting down.
    }
    PerformanceWarning warn(Menu::getInstance()->isOptionChecked(MenuOption::PipelineWarnings),
                            "DatagramProcessor::processDatagrams()");


    HifiSockAddr senderSockAddr;

    static QByteArray incomingPacket;

    Application* application = Application::getInstance();
    auto nodeList = DependencyManager::get<NodeList>();

    while (DependencyManager::get<NodeList>()->getNodeSocket().hasPendingDatagrams()) {
        incomingPacket.resize(nodeList->getNodeSocket().pendingDatagramSize());
        nodeList->readDatagram(incomingPacket, senderSockAddr.getAddressPointer(), senderSockAddr.getPortPointer());

        _inPacketCount++;
        _inByteCount += incomingPacket.size();

        if (nodeList->packetVersionAndHashMatch(incomingPacket)) {

            PacketType incomingType = packetTypeForPacket(incomingPacket);
            // only process this packet if we have a match on the packet version
            switch (incomingType) {
                case PacketTypeAudioEnvironment:
                case PacketTypeAudioStreamStats:
                case PacketTypeMixedAudio:
                case PacketTypeSilentAudioFrame: {
                    if (incomingType == PacketTypeAudioStreamStats) {
                        QMetaObject::invokeMethod(DependencyManager::get<AudioClient>().data(), "parseAudioStreamStatsPacket",
                                                  Qt::QueuedConnection,
                                                  Q_ARG(QByteArray, incomingPacket));
                    } else if (incomingType == PacketTypeAudioEnvironment) {
                        QMetaObject::invokeMethod(DependencyManager::get<AudioClient>().data(), "parseAudioEnvironmentData",
                                                  Qt::QueuedConnection,
                                                  Q_ARG(QByteArray, incomingPacket));
                    } else {
                        QMetaObject::invokeMethod(DependencyManager::get<AudioClient>().data(), "addReceivedAudioToStream",
                                                  Qt::QueuedConnection,
                                                  Q_ARG(QByteArray, incomingPacket));
                    }

                    // update having heard from the audio-mixer and record the bytes received
                    SharedNodePointer audioMixer = nodeList->sendingNodeForPacket(incomingPacket);

                    if (audioMixer) {
                        audioMixer->setLastHeardMicrostamp(usecTimestampNow());
                    }

                    break;
                }
                case PacketTypeEntityData:
                case PacketTypeEntityErase:
                case PacketTypeOctreeStats:
                case PacketTypeEnvironmentData: {
                    PerformanceWarning warn(Menu::getInstance()->isOptionChecked(MenuOption::PipelineWarnings),
                                            "Application::networkReceive()... _octreeProcessor.queueReceivedPacket()");
                    SharedNodePointer matchedNode = DependencyManager::get<NodeList>()->sendingNodeForPacket(incomingPacket);

                    if (matchedNode) {
                        // add this packet to our list of octree packets and process them on the octree data processing
                        application->_octreeProcessor.queueReceivedPacket(matchedNode, incomingPacket);
                    }
                    break;
                }
                case PacketTypeBulkAvatarData:
                case PacketTypeKillAvatar:
                case PacketTypeAvatarIdentity:
                case PacketTypeAvatarBillboard: {
                    // update having heard from the avatar-mixer and record the bytes received
                    SharedNodePointer avatarMixer = nodeList->sendingNodeForPacket(incomingPacket);

                    if (avatarMixer) {
                        avatarMixer->setLastHeardMicrostamp(usecTimestampNow());

                        QMetaObject::invokeMethod(DependencyManager::get<AvatarManager>().data(), "processAvatarMixerDatagram",
                                                  Q_ARG(const QByteArray&, incomingPacket),
                                                  Q_ARG(const QWeakPointer<Node>&, avatarMixer));
                    }
                    break;
                }
                case PacketTypeDomainConnectionDenied: {
                    int headerSize = numBytesForPacketHeaderGivenPacketType(PacketTypeDomainConnectionDenied);
                    QDataStream packetStream(QByteArray(incomingPacket.constData() + headerSize,
                                                        incomingPacket.size() - headerSize));
                    QString reason;
                    packetStream >> reason;

                    // output to the log so the user knows they got a denied connection request
                    // and check and signal for an access token so that we can make sure they are logged in
                    qCDebug(interfaceapp) << "The domain-server denied a connection request: " << reason;
                    qCDebug(interfaceapp) << "You may need to re-log to generate a keypair so you can provide a username signature.";
                    application->domainConnectionDenied(reason);
                    AccountManager::getInstance().checkAndSignalForAccessToken();
                    break;
                }
                case PacketTypeNoisyMute:
                case PacketTypeMuteEnvironment: {
                    bool mute = !DependencyManager::get<AudioClient>()->isMuted();

                    if (incomingType == PacketTypeMuteEnvironment) {
                        glm::vec3 position;
                        float radius;

                        int headerSize = numBytesForPacketHeaderGivenPacketType(PacketTypeMuteEnvironment);
                        memcpy(&position, incomingPacket.constData() + headerSize, sizeof(glm::vec3));
                        memcpy(&radius, incomingPacket.constData() + headerSize + sizeof(glm::vec3), sizeof(float));
                        float distance = glm::distance(DependencyManager::get<AvatarManager>()->getMyAvatar()->getPosition(),
                                                 position);

                        mute = mute && (distance < radius);
                    }

                    if (mute) {
                        DependencyManager::get<AudioClient>()->toggleMute();
                        if (incomingType == PacketTypeMuteEnvironment) {
                            AudioScriptingInterface::getInstance().environmentMuted();
                        } else {
                            AudioScriptingInterface::getInstance().mutedByMixer();
                        }
                    }
                    break;
                }
                case PacketTypeEntityEditNack:
                    if (!Menu::getInstance()->isOptionChecked(MenuOption::DisableNackPackets)) {
                        application->_entityEditSender.processNackPacket(incomingPacket);
                    }
                    break;
                default:
                    nodeList->processNodeData(senderSockAddr, incomingPacket);
                    break;
            }
        }
    }