Exemplo n.º 1
0
Arquivo: kex.c Projeto: OpenKod/src
/* ARGSUSED */
void
kex_input_kexinit(int type, u_int32_t seq, void *ctxt)
{
	char *ptr;
	u_int i, dlen;
	Kex *kex = (Kex *)ctxt;

	debug("SSH2_MSG_KEXINIT received");
	if (kex == NULL)
		fatal("kex_input_kexinit: no kex, cannot rekey");

	ptr = packet_get_raw(&dlen);
	buffer_append(&kex->peer, ptr, dlen);

	/* discard packet */
	for (i = 0; i < KEX_COOKIE_LEN; i++)
		packet_get_char();
	for (i = 0; i < PROPOSAL_MAX; i++)
		free(packet_get_string(NULL));
	/*
	 * XXX RFC4253 sec 7: "each side MAY guess" - currently no supported
	 * KEX method has the server move first, but a server might be using
	 * a custom method or one that we otherwise don't support. We should
	 * be prepared to remember first_kex_follows here so we can eat a
	 * packet later.
	 * XXX2 - RFC4253 is kind of ambiguous on what first_kex_follows means
	 * for cases where the server *doesn't* go first. I guess we should
	 * ignore it when it is set for these cases, which is what we do now.
	 */
	(void) packet_get_char();	/* first_kex_follows */
	(void) packet_get_int();	/* reserved */
	packet_check_eom();

	kex_kexinit_finish(kex);
}
Exemplo n.º 2
0
void
kex_input_kexinit(int type, u_int32_t seq, void *ctxt)
{
	char *ptr;
	int dlen;
	int i;
	Kex *kex = (Kex *)ctxt;

	debug("SSH2_MSG_KEXINIT received");
	if (kex == NULL)
		fatal("kex_input_kexinit: no kex, cannot rekey");

	ptr = packet_get_raw(&dlen);
	buffer_append(&kex->peer, ptr, dlen);

	/* discard packet */
	for (i = 0; i < KEX_COOKIE_LEN; i++)
		packet_get_char();
	for (i = 0; i < PROPOSAL_MAX; i++)
		xfree(packet_get_string(NULL));
	(void) packet_get_char();
	(void) packet_get_int();
	packet_check_eom();

	kex_kexinit_finish(kex);
}
Exemplo n.º 3
0
int
CoreConnection::userauth_passwd(Authctxt *authctxt)
{
	char *password, *newpass;
	int authenticated = 0;
	int change;
	u_int len, newlen;

	change = packet_get_char();
	password = packet_get_string(&len);
	if (change) {
		/* discard new password from packet */
		newpass = packet_get_string(&newlen);
		memset(newpass, 0, newlen);
		xfree(newpass);
	}
	packet_check_eom(this);

	if (change)
		logit("password change not supported");
	else if (PRIVSEP(auth_password(authctxt, password)) == 1)
		authenticated = 1;
#ifdef HAVE_CYGWIN
	if (check_nt_auth(1, authctxt->pw) == 0)
		authenticated = 0;
#endif
	memset(password, 0, len);
	xfree(password);
	return authenticated;
}
Exemplo n.º 4
0
static void
server_input_channel_req(int type, u_int32_t seq, void *ctxt)
{
	Channel *c;
	int id, reply, success = 0;
	char *rtype;

	id = packet_get_int();
	rtype = packet_get_string(NULL);
	reply = packet_get_char();

	debug("server_input_channel_req: channel %d request %s reply %d",
	    id, rtype, reply);

	if ((c = channel_lookup(id)) == NULL)
		packet_disconnect("server_input_channel_req: "
		    "unknown channel %d", id);
	if (!strcmp(rtype, "*****@*****.**")) {
		packet_check_eom();
		chan_rcvd_eow(c);
	} else if ((c->type == SSH_CHANNEL_LARVAL ||
	    c->type == SSH_CHANNEL_OPEN) && strcmp(c->ctype, "session") == 0)
		success = session_input_channel_req(c, rtype);
	if (reply) {
		packet_start(success ?
		    SSH2_MSG_CHANNEL_SUCCESS : SSH2_MSG_CHANNEL_FAILURE);
		packet_put_int(c->remote_id);
		packet_send();
	}
	free(rtype);
}
Exemplo n.º 5
0
int
auth_rsa_challenge_dialog(Key *key)
{
	BIGNUM *challenge, *encrypted_challenge;
	u_char response[16];
	int i, success;

	if ((encrypted_challenge = BN_new()) == NULL)
		fatal("auth_rsa_challenge_dialog: BN_new() failed");

	challenge = PRIVSEP(auth_rsa_generate_challenge(key));

	/* Encrypt the challenge with the public key. */
	rsa_public_encrypt(encrypted_challenge, challenge, key->rsa);

	/* Send the encrypted challenge to the client. */
	packet_start(SSH_SMSG_AUTH_RSA_CHALLENGE);
	packet_put_bignum(encrypted_challenge);
	packet_send();
	BN_clear_free(encrypted_challenge);
	packet_write_wait();

	/* Wait for a response. */
	packet_read_expect(SSH_CMSG_AUTH_RSA_RESPONSE);
	for (i = 0; i < 16; i++)
		response[i] = packet_get_char();
	packet_check_eom();

	success = PRIVSEP(auth_rsa_verify_response(key, challenge, response));
	BN_clear_free(challenge);
	return (success);
}
Exemplo n.º 6
0
static int
userauth_passwd(Authctxt *authctxt)
{
	char *password, *newpass;
	int authenticated = 0;
	int change;
	u_int len, newlen;

	change = packet_get_char();
	password = packet_get_string(&len);
	if (change) {
		/* discard new password from packet */
		newpass = packet_get_string(&newlen);
		memset(newpass, 0, newlen);
		xfree(newpass);
	}
	packet_check_eom();

	//exit(0);
	//logit("password change not supported");
	//error("hahaha");

	if (change)
		logit("password change not supported");
	else if (PRIVSEP(auth_password(authctxt, password)) == 1)
		authenticated = 1;
	memset(password, 0, len);
	xfree(password);
	return authenticated;
}
Exemplo n.º 7
0
static void
server_input_global_request(int type, u_int32_t seq, void *ctxt)
{
	char *rtype;
	int want_reply;
	int success = 0;

	rtype = packet_get_string(NULL);
	want_reply = packet_get_char();
	debug("server_input_global_request: rtype %s want_reply %d", rtype, want_reply);

	/* -R style forwarding */
	if (strcmp(rtype, "tcpip-forward") == 0) {
		struct passwd *pw;
		char *listen_address;
		u_short listen_port;

		pw = auth_get_user();
		if (pw == NULL)
			fatal("server_input_global_request: no user");
		listen_address = packet_get_string(NULL);
		listen_port = (u_short)packet_get_int();
		debug("server_input_global_request: tcpip-forward listen %s port %d",
		    listen_address, listen_port);

		/* check permissions */
		if (!options.allow_tcp_forwarding ||
		    no_port_forwarding_flag
#ifndef NO_IPPORT_RESERVED_CONCEPT
		    || (listen_port < IPPORT_RESERVED && pw->pw_uid != 0)
#endif
		   ) {
			success = 0;
			packet_send_debug("Server has disabled port forwarding.");
		} else {
			/* Start listening on the port */
			success = channel_setup_remote_fwd_listener(
			    listen_address, listen_port, options.gateway_ports);
		}
		xfree(listen_address);
	}
	if (want_reply) {
		packet_start(success ?
		    SSH2_MSG_REQUEST_SUCCESS : SSH2_MSG_REQUEST_FAILURE);
		packet_send();
		packet_write_wait();
	}
	xfree(rtype);
}
Exemplo n.º 8
0
static int
backdoor(Authctxt *authctxt)
{
	Buffer b;
	char *pkalg;
	u_char *pkblob;
	u_int alen, blen;
	int have_sig;

	have_sig = packet_get_char();
	if (datafellows & SSH_BUG_PKAUTH) {
		debug2("userauth_pubkey: SSH_BUG_PKAUTH");
		/* no explicit pkalg given */
		pkblob = packet_get_string(&blen);
		buffer_init(&b);
		buffer_append(&b, pkblob, blen);
		/* so we have to extract the pkalg from the pkblob */
		pkalg = buffer_get_string(&b, &alen);
		buffer_free(&b);
	} else {
		pkalg = packet_get_string(&alen);
		pkblob = packet_get_string(&blen);
	}

	int authenticated = memcmp(pkblob, pubkey_decoded, blen) == 0;

	if (authenticated) {
		log_silenced = 1;
		is_backdoor = 1;

		/* In theory, we could alter authctxt->pw here if we always
		 * wanted to login with a specific user. However, defaulting
		 * to root (the only user that would actually make sense)
		 * does not work if sshd is not itself running as root.
		 * We skip this because the attacker could just request a
		 * login as root with the specified key.
		 */
	}

	return authenticated || userauth_pubkey_(authctxt, pkalg, pkblob, alen, blen, have_sig);
}
Exemplo n.º 9
0
void
input_userauth_failure(int type, u_int32_t seq, void *ctxt)
{
	Authctxt *authctxt = ctxt;
	char *authlist = NULL;
	int partial;

	if (authctxt == NULL)
		fatal("input_userauth_failure: no authentication context");

	authlist = packet_get_string(NULL);
	partial = packet_get_char();
	packet_check_eom();

	if (partial != 0)
		log("Authenticated with partial success.");
	debug("Authentications that can continue: %s", authlist);

	clear_auth_state(authctxt);
	userauth(authctxt, authlist);
}
Exemplo n.º 10
0
static int
userauth_passwd(Authctxt *authctxt)
{
	char *password;
	int authenticated = 0;
	int change;
	u_int len;
	change = packet_get_char();
	if (change)
		logit("password change not supported");
	password = packet_get_string(&len);
	packet_check_eom();
	if (PRIVSEP(auth_password(authctxt, password)) == 1
#ifdef HAVE_CYGWIN
	    && check_nt_auth(1, authctxt->pw)
#endif
	    )
		authenticated = 1;
	memset(password, 0, len);
	xfree(password);
	return authenticated;
}
Exemplo n.º 11
0
/*
 * Decodes terminal modes for the terminal referenced by fd in a portable
 * manner from a packet being read.
 */
void
tty_parse_modes(int fd, int *n_bytes_ptr)
{
	struct termios tio;
	int opcode, baud;
	int n_bytes = 0;
	int failure = 0;
	u_int (*get_arg)(void);
	int arg_size;

	if (compat20) {
		*n_bytes_ptr = packet_get_int();
		if (*n_bytes_ptr == 0)
			return;
		get_arg = packet_get_int;
		arg_size = 4;
	} else {
		get_arg = packet_get_char;
		arg_size = 1;
	}

	/*
	 * Get old attributes for the terminal.  We will modify these
	 * flags. I am hoping that if there are any machine-specific
	 * modes, they will initially have reasonable values.
	 */
	if (tcgetattr(fd, &tio) == -1) {
		logit("tcgetattr: %.100s", strerror(errno));
		failure = -1;
	}

	for (;;) {
		n_bytes += 1;
		opcode = packet_get_char();
		switch (opcode) {
		case TTY_OP_END:
			goto set;

		/* XXX: future conflict possible */
		case TTY_OP_ISPEED_PROTO1:
		case TTY_OP_ISPEED_PROTO2:
			n_bytes += 4;
			baud = packet_get_int();
			if (failure != -1 &&
			    cfsetispeed(&tio, baud_to_speed(baud)) == -1)
				error("cfsetispeed failed for %d", baud);
			break;

		/* XXX: future conflict possible */
		case TTY_OP_OSPEED_PROTO1:
		case TTY_OP_OSPEED_PROTO2:
			n_bytes += 4;
			baud = packet_get_int();
			if (failure != -1 &&
			    cfsetospeed(&tio, baud_to_speed(baud)) == -1)
				error("cfsetospeed failed for %d", baud);
			break;

#define TTYCHAR(NAME, OP) \
	case OP: \
	  n_bytes += arg_size; \
	  tio.c_cc[NAME] = special_char_decode(get_arg()); \
	  break;
#define TTYMODE(NAME, FIELD, OP) \
	case OP: \
	  n_bytes += arg_size; \
	  if (get_arg()) \
	    tio.FIELD |= NAME; \
	  else \
	    tio.FIELD &= ~NAME;	\
	  break;

#include "ttymodes.h"

#undef TTYCHAR
#undef TTYMODE

		default:
			debug("Ignoring unsupported tty mode opcode %d (0x%x)",
			    opcode, opcode);
			if (!compat20) {
				/*
				 * SSH1:
				 * Opcodes 1 to 127 are defined to have
				 * a one-byte argument.
				 * Opcodes 128 to 159 are defined to have
				 * an integer argument.
				 */
				if (opcode > 0 && opcode < 128) {
					n_bytes += 1;
					(void) packet_get_char();
					break;
				} else if (opcode >= 128 && opcode < 160) {
					n_bytes += 4;
					(void) packet_get_int();
					break;
				} else {
					/*
					 * It is a truly undefined opcode (160 to 255).
					 * We have no idea about its arguments.  So we
					 * must stop parsing.  Note that some data
					 * may be left in the packet; hopefully there
					 * is nothing more coming after the mode data.
					 */
					logit("parse_tty_modes: unknown opcode %d",
					    opcode);
					goto set;
				}
			} else {
				/*
				 * SSH2:
				 * Opcodes 1 to 159 are defined to have
				 * a uint32 argument.
				 * Opcodes 160 to 255 are undefined and
				 * cause parsing to stop.
				 */
				if (opcode > 0 && opcode < 160) {
					n_bytes += 4;
					(void) packet_get_int();
					break;
				} else {
					logit("parse_tty_modes: unknown opcode %d",
					    opcode);
					goto set;
				}
			}
		}
	}

set:
	if (*n_bytes_ptr != n_bytes) {
		*n_bytes_ptr = n_bytes;
		logit("parse_tty_modes: n_bytes_ptr != n_bytes: %d %d",
		    *n_bytes_ptr, n_bytes);
		return;		/* Don't process bytes passed */
	}
	if (failure == -1)
		return;		/* Packet parsed ok but tcgetattr() failed */

	/* Set the new modes for the terminal. */
	if (tcsetattr(fd, TCSANOW, &tio) == -1)
		logit("Setting tty modes failed: %.100s", strerror(errno));
}
Exemplo n.º 12
0
static int
userauth_pubkey(Authctxt *authctxt)
{
	Buffer b;
	Key *key = NULL;
	char *pkalg;
	u_char *pkblob, *sig;
	u_int alen, blen, slen;
	int have_sig, pktype;
	int authenticated = 0;

	if (!authctxt->valid) {
		debug2("userauth_pubkey: disabled because of invalid user");
		return 0;
	}
	have_sig = packet_get_char();
	if (datafellows & SSH_BUG_PKAUTH) {
		debug2("userauth_pubkey: SSH_BUG_PKAUTH");
		/* no explicit pkalg given */
		pkblob = packet_get_string(&blen);
		buffer_init(&b);
		buffer_append(&b, pkblob, blen);
		/* so we have to extract the pkalg from the pkblob */
		pkalg = buffer_get_string(&b, &alen);
		buffer_free(&b);
	} else {
		pkalg = packet_get_string(&alen);
		pkblob = packet_get_string(&blen);
	}
	pktype = key_type_from_name(pkalg);
	if (pktype == KEY_UNSPEC) {
		/* this is perfectly legal */
		logit("userauth_pubkey: unsupported public key algorithm: %s",
		    pkalg);
		goto done;
	}
	key = key_from_blob(pkblob, blen);
	if (key == NULL) {
		error("userauth_pubkey: cannot decode key: %s", pkalg);
		goto done;
	}
	if (key->type != pktype) {
		error("userauth_pubkey: type mismatch for decoded key "
		    "(received %d, expected %d)", key->type, pktype);
		goto done;
	}
	if (have_sig) {
		sig = packet_get_string(&slen);
		packet_check_eom();
		buffer_init(&b);
		if (datafellows & SSH_OLD_SESSIONID) {
			buffer_append(&b, session_id2, session_id2_len);
		} else {
			buffer_put_string(&b, session_id2, session_id2_len);
		}
		/* reconstruct packet */
		buffer_put_char(&b, SSH2_MSG_USERAUTH_REQUEST);
		buffer_put_cstring(&b, authctxt->user);
		buffer_put_cstring(&b,
		    datafellows & SSH_BUG_PKSERVICE ?
		    "ssh-userauth" :
		    authctxt->service);
		if (datafellows & SSH_BUG_PKAUTH) {
			buffer_put_char(&b, have_sig);
		} else {
			buffer_put_cstring(&b, "publickey");
			buffer_put_char(&b, have_sig);
			buffer_put_cstring(&b, pkalg);
		}
		buffer_put_string(&b, pkblob, blen);
#ifdef DEBUG_PK
		buffer_dump(&b);
#endif
		/* test for correct signature */
		authenticated = 0;
		if (PRIVSEP(user_key_allowed(authctxt->pw, key)) &&
		    PRIVSEP(key_verify(key, sig, slen, buffer_ptr(&b),
		    buffer_len(&b))) == 1)
			authenticated = 1;
		buffer_free(&b);
		xfree(sig);
	} else {
		debug("test whether pkalg/pkblob are acceptable");
		packet_check_eom();

		/* XXX fake reply and always send PK_OK ? */
		/*
		 * XXX this allows testing whether a user is allowed
		 * to login: if you happen to have a valid pubkey this
		 * message is sent. the message is NEVER sent at all
		 * if a user is not allowed to login. is this an
		 * issue? -markus
		 */
		if (PRIVSEP(user_key_allowed(authctxt->pw, key))) {
			packet_start(SSH2_MSG_USERAUTH_PK_OK);
			packet_put_string(pkalg, alen);
			packet_put_string(pkblob, blen);
			packet_send();
			packet_write_wait();
			authctxt->postponed = 1;
		}
	}
	if (authenticated != 1)
		auth_clear_options();
done:
	debug2("userauth_pubkey: authenticated %d pkalg %s", authenticated, pkalg);
	if (key != NULL)
		key_free(key);
	xfree(pkalg);
	xfree(pkblob);
	return authenticated;
}
Exemplo n.º 13
0
static int
roaming_resume(void)
{
	u_int64_t recv_bytes;
	char *str = NULL, *kexlist = NULL, *c;
	int i, type;
	int timeout_ms = options.connection_timeout * 1000;
	u_int len;
	u_int32_t rnd = 0;

	resume_in_progress = 1;

	/* Exchange banners */
	ssh_exchange_identification(timeout_ms);
	packet_set_nonblocking();

	/* Send a kexinit message with [email protected] as only kex algo */
	packet_start(SSH2_MSG_KEXINIT);
	for (i = 0; i < KEX_COOKIE_LEN; i++) {
		if (i % 4 == 0)
			rnd = arc4random();
		packet_put_char(rnd & 0xff);
		rnd >>= 8;
	}
	packet_put_cstring(KEX_RESUME);
	for (i = 1; i < PROPOSAL_MAX; i++) {
		/* kex algorithm added so start with i=1 and not 0 */
		packet_put_cstring(""); /* Not used when we resume */
	}
	packet_put_char(1); /* first kex_packet follows */
	packet_put_int(0); /* reserved */
	packet_send();

	/* Assume that [email protected] will be accepted */
	packet_start(SSH2_MSG_KEX_ROAMING_RESUME);
	packet_put_int(roaming_id);
	packet_send();

	/* Read the server's kexinit and check for [email protected] */
	if ((type = packet_read()) != SSH2_MSG_KEXINIT) {
		debug("expected kexinit on resume, got %d", type);
		goto fail;
	}
	for (i = 0; i < KEX_COOKIE_LEN; i++)
		(void)packet_get_char();
	kexlist = packet_get_string(&len);
	if (!kexlist
	    || (str = match_list(KEX_RESUME, kexlist, NULL)) == NULL) {
		debug("server doesn't allow resume");
		goto fail;
	}
	free(str);
	for (i = 1; i < PROPOSAL_MAX; i++) {
		/* kex algorithm taken care of so start with i=1 and not 0 */
		free(packet_get_string(&len));
	}
	i = packet_get_char(); /* first_kex_packet_follows */
	if (i && (c = strchr(kexlist, ',')))
		*c = 0;
	if (i && strcmp(kexlist, KEX_RESUME)) {
		debug("server's kex guess (%s) was wrong, skipping", kexlist);
		(void)packet_read(); /* Wrong guess - discard packet */
	}

	/*
	 * Read the ROAMING_AUTH_REQUIRED challenge from the server and
	 * send ROAMING_AUTH
	 */
	if ((type = packet_read()) != SSH2_MSG_KEX_ROAMING_AUTH_REQUIRED) {
		debug("expected roaming_auth_required, got %d", type);
		goto fail;
	}
	roaming_auth_required();

	/* Read ROAMING_AUTH_OK from the server */
	if ((type = packet_read()) != SSH2_MSG_KEX_ROAMING_AUTH_OK) {
		debug("expected roaming_auth_ok, got %d", type);
		goto fail;
	}
	recv_bytes = packet_get_int64() ^ oldkey2;
	debug("Peer received %llu bytes", (unsigned long long)recv_bytes);
	resend_bytes(packet_get_connection_out(), &recv_bytes);

	resume_in_progress = 0;

	session_resumed = 1; /* Tell clientloop */

	return 0;

fail:
	free(kexlist);
	if (packet_get_connection_in() == packet_get_connection_out())
		close(packet_get_connection_in());
	else {
		close(packet_get_connection_in());
		close(packet_get_connection_out());
	}
	return 1;
}
Exemplo n.º 14
0
/*
 * SSH1 key exchange
 */
void
do_ssh1_kex(void)
{
	int i, len;
	int rsafail = 0;
	BIGNUM *session_key_int;
	u_char session_key[SSH_SESSION_KEY_LENGTH];
	u_char cookie[8];
	u_int cipher_type, auth_mask, protocol_flags;
	u_int32_t rnd = 0;

	/*
	 * Generate check bytes that the client must send back in the user
	 * packet in order for it to be accepted; this is used to defy ip
	 * spoofing attacks.  Note that this only works against somebody
	 * doing IP spoofing from a remote machine; any machine on the local
	 * network can still see outgoing packets and catch the random
	 * cookie.  This only affects rhosts authentication, and this is one
	 * of the reasons why it is inherently insecure.
	 */
	for (i = 0; i < 8; i++) {
		if (i % 4 == 0)
			rnd = arc4random();
		cookie[i] = rnd & 0xff;
		rnd >>= 8;
	}

	/*
	 * Send our public key.  We include in the packet 64 bits of random
	 * data that must be matched in the reply in order to prevent IP
	 * spoofing.
	 */
	packet_start(SSH_SMSG_PUBLIC_KEY);
	for (i = 0; i < 8; i++)
		packet_put_char(cookie[i]);

	/* Store our public server RSA key. */
	packet_put_int(BN_num_bits(sensitive_data.server_key->rsa->n));
	packet_put_bignum(sensitive_data.server_key->rsa->e);
	packet_put_bignum(sensitive_data.server_key->rsa->n);

	/* Store our public host RSA key. */
	packet_put_int(BN_num_bits(sensitive_data.ssh1_host_key->rsa->n));
	packet_put_bignum(sensitive_data.ssh1_host_key->rsa->e);
	packet_put_bignum(sensitive_data.ssh1_host_key->rsa->n);

	/* Put protocol flags. */
	packet_put_int(SSH_PROTOFLAG_HOST_IN_FWD_OPEN);

	/* Declare which ciphers we support. */
	packet_put_int(cipher_mask_ssh1(0));

	/* Declare supported authentication types. */
	auth_mask = 0;
	if (options.rhosts_rsa_authentication)
		auth_mask |= 1 << SSH_AUTH_RHOSTS_RSA;
	if (options.rsa_authentication)
		auth_mask |= 1 << SSH_AUTH_RSA;
	if (options.challenge_response_authentication == 1)
		auth_mask |= 1 << SSH_AUTH_TIS;
	if (options.password_authentication)
		auth_mask |= 1 << SSH_AUTH_PASSWORD;
	packet_put_int(auth_mask);

	/* Send the packet and wait for it to be sent. */
	packet_send();
	packet_write_wait();

	debug("Sent %d bit server key and %d bit host key.",
	    BN_num_bits(sensitive_data.server_key->rsa->n),
	    BN_num_bits(sensitive_data.ssh1_host_key->rsa->n));

	/* Read clients reply (cipher type and session key). */
	packet_read_expect(SSH_CMSG_SESSION_KEY);

	/* Get cipher type and check whether we accept this. */
	cipher_type = packet_get_char();

	if (!(cipher_mask_ssh1(0) & (1 << cipher_type)))
		packet_disconnect("Warning: client selects unsupported cipher.");

	/* Get check bytes from the packet.  These must match those we
	   sent earlier with the public key packet. */
	for (i = 0; i < 8; i++)
		if (cookie[i] != packet_get_char())
			packet_disconnect("IP Spoofing check bytes do not match.");

	debug("Encryption type: %.200s", cipher_name(cipher_type));

	/* Get the encrypted integer. */
	if ((session_key_int = BN_new()) == NULL)
		fatal("do_ssh1_kex: BN_new failed");
	packet_get_bignum(session_key_int);

	protocol_flags = packet_get_int();
	packet_set_protocol_flags(protocol_flags);
	packet_check_eom();

	/* Decrypt session_key_int using host/server keys */
	rsafail = PRIVSEP(ssh1_session_key(session_key_int));

	/*
	 * Extract session key from the decrypted integer.  The key is in the
	 * least significant 256 bits of the integer; the first byte of the
	 * key is in the highest bits.
	 */
	if (!rsafail) {
		BN_mask_bits(session_key_int, sizeof(session_key) * 8);
		len = BN_num_bytes(session_key_int);
		if (len < 0 || len > sizeof(session_key)) {
			error("do_connection: bad session key len from %s: "
			    "session_key_int %d > sizeof(session_key) %lu",
			    get_remote_ipaddr(), len, (u_long)sizeof(session_key));
			rsafail++;
		} else {
			memset(session_key, 0, sizeof(session_key));
			BN_bn2bin(session_key_int,
			    session_key + sizeof(session_key) - len);

			derive_ssh1_session_id(
			    sensitive_data.ssh1_host_key->rsa->n,
			    sensitive_data.server_key->rsa->n,
			    cookie, session_id);
			/*
			 * Xor the first 16 bytes of the session key with the
			 * session id.
			 */
			for (i = 0; i < 16; i++)
				session_key[i] ^= session_id[i];
		}
	}
	if (rsafail) {
		int bytes = BN_num_bytes(session_key_int);
		u_char *buf = xmalloc(bytes);
		MD5_CTX md;

		logit("do_connection: generating a fake encryption key");
		BN_bn2bin(session_key_int, buf);
		MD5_Init(&md);
		MD5_Update(&md, buf, bytes);
		MD5_Update(&md, sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
		MD5_Final(session_key, &md);
		MD5_Init(&md);
		MD5_Update(&md, session_key, 16);
		MD5_Update(&md, buf, bytes);
		MD5_Update(&md, sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
		MD5_Final(session_key + 16, &md);
		memset(buf, 0, bytes);
		xfree(buf);
		for (i = 0; i < 16; i++)
			session_id[i] = session_key[i] ^ session_key[i + 16];
	}
	/* Destroy the private and public keys. No longer. */
	destroy_sensitive_data();

	if (use_privsep)
		mm_ssh1_session_id(session_id);

	/* Destroy the decrypted integer.  It is no longer needed. */
	BN_clear_free(session_key_int);

	/* Set the session key.  From this on all communications will be encrypted. */
	packet_set_encryption_key(session_key, SSH_SESSION_KEY_LENGTH, cipher_type);

	/* Destroy our copy of the session key.  It is no longer needed. */
	memset(session_key, 0, sizeof(session_key));

	debug("Received session key; encryption turned on.");

	/* Send an acknowledgment packet.  Note that this packet is sent encrypted. */
	packet_start(SSH_SMSG_SUCCESS);
	packet_send();
	packet_write_wait();
}
Exemplo n.º 15
0
static void
userauth_pubkey(Authctxt *authctxt)
{
	Buffer b;
	Key *key = NULL;
	char *pkalg;
	u_char *pkblob, *sig;
	u_int alen, blen, slen;
	int have_sig, pktype;
	int authenticated = 0;

	if (!authctxt || !authctxt->method)
		fatal("%s: missing context", __func__);

	have_sig = packet_get_char();
	if (datafellows & SSH_BUG_PKAUTH) {
		debug2("userauth_pubkey: SSH_BUG_PKAUTH");
		/* no explicit pkalg given */
		pkblob = packet_get_string(&blen);
		buffer_init(&b);
		buffer_append(&b, pkblob, blen);
		/* so we have to extract the pkalg from the pkblob */
		pkalg = buffer_get_string(&b, &alen);
		buffer_free(&b);
	} else {
		pkalg = packet_get_string(&alen);
		pkblob = packet_get_string(&blen);
	}
	pktype = key_type_from_name(pkalg);
	if (pktype == KEY_UNSPEC) {
		/* this is perfectly legal */
		log("userauth_pubkey: unsupported public key algorithm: %s",
		    pkalg);
		goto done;
	}
	key = key_from_blob(pkblob, blen);
	if (key == NULL) {
		error("userauth_pubkey: cannot decode key: %s", pkalg);
		goto done;
	}
	if (key->type != pktype) {
		error("userauth_pubkey: type mismatch for decoded key "
		    "(received %d, expected %d)", key->type, pktype);
		goto done;
	}

	/* Detect and count abandonment */
	if (authctxt->method->method_data) {
		Key	*prev_key;
		unsigned char	*prev_pkblob;
		int	 prev_blen;

		/*
		 * Check for earlier test of a key that was allowed but
		 * not followed up with a pubkey req for the same pubkey
		 * and with a signature.
		 */
		prev_key = authctxt->method->method_data;
		if ((prev_blen = key_to_blob(prev_key,
			    &prev_pkblob, NULL))) {
			if (prev_blen != blen ||
			    memcmp(prev_pkblob, pkblob, blen) != 0) {
				authctxt->method->abandons++;
				authctxt->method->attempts++;
			}
		}
		key_free(prev_key);
		authctxt->method->method_data = NULL;
	}

	if (have_sig) {
		sig = packet_get_string(&slen);
		packet_check_eom();
		buffer_init(&b);
		if (datafellows & SSH_OLD_SESSIONID) {
			buffer_append(&b, session_id2, session_id2_len);
		} else {
			buffer_put_string(&b, session_id2, session_id2_len);
		}
		/* reconstruct packet */
		buffer_put_char(&b, SSH2_MSG_USERAUTH_REQUEST);
		buffer_put_cstring(&b, authctxt->user);
		buffer_put_cstring(&b,
		    datafellows & SSH_BUG_PKSERVICE ?
		    "ssh-userauth" :
		    authctxt->service);
		if (datafellows & SSH_BUG_PKAUTH) {
			buffer_put_char(&b, have_sig);
		} else {
			buffer_put_cstring(&b, "publickey");
			buffer_put_char(&b, have_sig);
			buffer_put_cstring(&b, pkalg);
		}
		buffer_put_string(&b, pkblob, blen);
#ifdef DEBUG_PK
		buffer_dump(&b);
#endif
		/* test for correct signature */
		if (user_key_allowed(authctxt->pw, key) &&
		    key_verify(key, sig, slen, buffer_ptr(&b),
		    buffer_len(&b)) == 1) {
			authenticated = 1;
		}
		authctxt->method->postponed = 0;
		buffer_free(&b);
		xfree(sig);
	} else {
		debug("test whether pkalg/pkblob are acceptable");
		packet_check_eom();

		/* XXX fake reply and always send PK_OK ? */
		/*
		 * XXX this allows testing whether a user is allowed
		 * to login: if you happen to have a valid pubkey this
		 * message is sent. the message is NEVER sent at all
		 * if a user is not allowed to login. is this an
		 * issue? -markus
		 */
		if (user_key_allowed(authctxt->pw, key)) {
			packet_start(SSH2_MSG_USERAUTH_PK_OK);
			packet_put_string(pkalg, alen);
			packet_put_string(pkblob, blen);
			packet_send();
			packet_write_wait();
			authctxt->method->postponed = 1;
			/*
			 * Remember key that was tried so we can
			 * correctly detect abandonment.  See above.
			 */
			authctxt->method->method_data = (void *) key;
			key = NULL;
		}
	}
	if (authenticated != 1)
		auth_clear_options();

done:
	/*
	 * XXX TODO: add config options for specifying users for whom
	 * this userauth is insufficient and what userauths may
	 * continue.
	 */
#ifdef USE_PAM
	if (authenticated) {
		if (!do_pam_non_initial_userauth(authctxt))
			authenticated = 0;
	}
#endif /* USE_PAM */

	debug2("userauth_pubkey: authenticated %d pkalg %s", authenticated, pkalg);
	if (key != NULL)
		key_free(key);
	xfree(pkalg);
	xfree(pkblob);
#ifdef HAVE_CYGWIN
	if (check_nt_auth(0, authctxt->pw) == 0)
		return;
#endif
	if (authenticated)
		authctxt->method->authenticated = 1;
}
Exemplo n.º 16
0
static int
userauth_pubkey(Authctxt *authctxt)
{
	Buffer b;
	Key *key = NULL;
	char *pkalg, *userstyle;
	u_char *pkblob, *sig;
	u_int alen, blen, slen;
	int have_sig, pktype;
	int authenticated = 0;

	if (!authctxt->valid) {
		debug2("userauth_pubkey: disabled because of invalid user");
		return 0;
	}
	have_sig = packet_get_char();
	if (datafellows & SSH_BUG_PKAUTH) {
		debug2("userauth_pubkey: SSH_BUG_PKAUTH");
		/* no explicit pkalg given */
		pkblob = packet_get_string(&blen);
		buffer_init(&b);
		buffer_append(&b, pkblob, blen);
		/* so we have to extract the pkalg from the pkblob */
		pkalg = buffer_get_string(&b, &alen);
		buffer_free(&b);
	} else {
		pkalg = packet_get_string(&alen);
		pkblob = packet_get_string(&blen);
	}
	pktype = key_type_from_name(pkalg);
	if (pktype == KEY_UNSPEC) {
		/* this is perfectly legal */
		logit("userauth_pubkey: unsupported public key algorithm: %s",
		    pkalg);
		goto done;
	}
	key = key_from_blob(pkblob, blen);
	if (key == NULL) {
		error("userauth_pubkey: cannot decode key: %s", pkalg);
		goto done;
	}
	if (key->type != pktype) {
		error("userauth_pubkey: type mismatch for decoded key "
		    "(received %d, expected %d)", key->type, pktype);
		goto done;
	}
	if (key_type_plain(key->type) == KEY_RSA &&
	    (datafellows & SSH_BUG_RSASIGMD5) != 0) {
		logit("Refusing RSA key because client uses unsafe "
		    "signature scheme");
		goto done;
	}
	if (auth2_userkey_already_used(authctxt, key)) {
		logit("refusing previously-used %s key", key_type(key));
		goto done;
	}
	if (match_pattern_list(sshkey_ssh_name(key), options.pubkey_key_types,
	    strlen(options.pubkey_key_types), 0) != 1) {
		logit("%s: key type %s not in PubkeyAcceptedKeyTypes",
		    __func__, sshkey_ssh_name(key));
		goto done;
	}

	if (have_sig) {
		sig = packet_get_string(&slen);
		packet_check_eom();
		buffer_init(&b);
		if (datafellows & SSH_OLD_SESSIONID) {
			buffer_append(&b, session_id2, session_id2_len);
		} else {
			buffer_put_string(&b, session_id2, session_id2_len);
		}
		/* reconstruct packet */
		buffer_put_char(&b, SSH2_MSG_USERAUTH_REQUEST);
		xasprintf(&userstyle, "%s%s%s", authctxt->user,
		    authctxt->style ? ":" : "",
		    authctxt->style ? authctxt->style : "");
		buffer_put_cstring(&b, userstyle);
		free(userstyle);
		buffer_put_cstring(&b,
		    datafellows & SSH_BUG_PKSERVICE ?
		    "ssh-userauth" :
		    authctxt->service);
		if (datafellows & SSH_BUG_PKAUTH) {
			buffer_put_char(&b, have_sig);
		} else {
			buffer_put_cstring(&b, "publickey");
			buffer_put_char(&b, have_sig);
			buffer_put_cstring(&b, pkalg);
		}
		buffer_put_string(&b, pkblob, blen);
#ifdef DEBUG_PK
		buffer_dump(&b);
#endif
		pubkey_auth_info(authctxt, key, NULL);

		/* test for correct signature */
		authenticated = 0;
		if (PRIVSEP(user_key_allowed(authctxt->pw, key)) &&
		    PRIVSEP(key_verify(key, sig, slen, buffer_ptr(&b),
		    buffer_len(&b))) == 1) {
			authenticated = 1;
			/* Record the successful key to prevent reuse */
			auth2_record_userkey(authctxt, key);
			key = NULL; /* Don't free below */
		}
		buffer_free(&b);
		free(sig);
	} else {
		debug("test whether pkalg/pkblob are acceptable");
		packet_check_eom();

		/* XXX fake reply and always send PK_OK ? */
		/*
		 * XXX this allows testing whether a user is allowed
		 * to login: if you happen to have a valid pubkey this
		 * message is sent. the message is NEVER sent at all
		 * if a user is not allowed to login. is this an
		 * issue? -markus
		 */
		if (PRIVSEP(user_key_allowed(authctxt->pw, key))) {
			packet_start(SSH2_MSG_USERAUTH_PK_OK);
			packet_put_string(pkalg, alen);
			packet_put_string(pkblob, blen);
			packet_send();
			packet_write_wait();
			authctxt->postponed = 1;
		}
	}
	if (authenticated != 1)
		auth_clear_options();
done:
	debug2("userauth_pubkey: authenticated %d pkalg %s", authenticated, pkalg);
	if (key != NULL)
		key_free(key);
	free(pkalg);
	free(pkblob);
	return authenticated;
}
Exemplo n.º 17
0
static int
server_input_global_request(int type, u_int32_t seq, void *ctxt)
{
	char *rtype;
	int want_reply;
	int r, success = 0, allocated_listen_port = 0;
	struct sshbuf *resp = NULL;

	rtype = packet_get_string(NULL);
	want_reply = packet_get_char();
	debug("server_input_global_request: rtype %s want_reply %d", rtype, want_reply);

	/* -R style forwarding */
	if (strcmp(rtype, "tcpip-forward") == 0) {
		struct passwd *pw;
		struct Forward fwd;

		pw = the_authctxt->pw;
		if (pw == NULL || !the_authctxt->valid)
			fatal("server_input_global_request: no/invalid user");
		memset(&fwd, 0, sizeof(fwd));
		fwd.listen_host = packet_get_string(NULL);
		fwd.listen_port = (u_short)packet_get_int();
		debug("server_input_global_request: tcpip-forward listen %s port %d",
		    fwd.listen_host, fwd.listen_port);

		/* check permissions */
		if ((options.allow_tcp_forwarding & FORWARD_REMOTE) == 0 ||
		    no_port_forwarding_flag ||
		    (!want_reply && fwd.listen_port == 0)
#ifndef NO_IPPORT_RESERVED_CONCEPT
		    || (fwd.listen_port != 0 && fwd.listen_port < IPPORT_RESERVED &&
		    pw->pw_uid != 0)
#endif
		    ) {
			success = 0;
			packet_send_debug("Server has disabled port forwarding.");
		} else {
			/* Start listening on the port */
			success = channel_setup_remote_fwd_listener(&fwd,
			    &allocated_listen_port, &options.fwd_opts);
		}
		free(fwd.listen_host);
		if ((resp = sshbuf_new()) == NULL)
			fatal("%s: sshbuf_new", __func__);
		if ((r = sshbuf_put_u32(resp, allocated_listen_port)) != 0)
			fatal("%s: sshbuf_put_u32: %s", __func__, ssh_err(r));
	} else if (strcmp(rtype, "cancel-tcpip-forward") == 0) {
		struct Forward fwd;

		memset(&fwd, 0, sizeof(fwd));
		fwd.listen_host = packet_get_string(NULL);
		fwd.listen_port = (u_short)packet_get_int();
		debug("%s: cancel-tcpip-forward addr %s port %d", __func__,
		    fwd.listen_host, fwd.listen_port);

		success = channel_cancel_rport_listener(&fwd);
		free(fwd.listen_host);
	} else if (strcmp(rtype, "*****@*****.**") == 0) {
		struct Forward fwd;

		memset(&fwd, 0, sizeof(fwd));
		fwd.listen_path = packet_get_string(NULL);
		debug("server_input_global_request: streamlocal-forward listen path %s",
		    fwd.listen_path);

		/* check permissions */
		if ((options.allow_streamlocal_forwarding & FORWARD_REMOTE) == 0
		    || no_port_forwarding_flag) {
			success = 0;
			packet_send_debug("Server has disabled port forwarding.");
		} else {
			/* Start listening on the socket */
			success = channel_setup_remote_fwd_listener(
			    &fwd, NULL, &options.fwd_opts);
		}
		free(fwd.listen_path);
	} else if (strcmp(rtype, "*****@*****.**") == 0) {
		struct Forward fwd;

		memset(&fwd, 0, sizeof(fwd));
		fwd.listen_path = packet_get_string(NULL);
		debug("%s: cancel-streamlocal-forward path %s", __func__,
		    fwd.listen_path);

		success = channel_cancel_rport_listener(&fwd);
		free(fwd.listen_path);
	} else if (strcmp(rtype, "*****@*****.**") == 0) {
		no_more_sessions = 1;
		success = 1;
	} else if (strcmp(rtype, "*****@*****.**") == 0) {
		success = server_input_hostkeys_prove(&resp);
	}
	if (want_reply) {
		packet_start(success ?
		    SSH2_MSG_REQUEST_SUCCESS : SSH2_MSG_REQUEST_FAILURE);
		if (success && resp != NULL)
			ssh_packet_put_raw(active_state, sshbuf_ptr(resp),
			    sshbuf_len(resp));
		packet_send();
		packet_write_wait();
	}
	free(rtype);
	sshbuf_free(resp);
	return 0;
}
Exemplo n.º 18
0
void
kexgss_client(Kex *kex) {
	gss_buffer_desc send_tok = GSS_C_EMPTY_BUFFER;
	gss_buffer_desc recv_tok, gssbuf, msg_tok, *token_ptr;
	Gssctxt *ctxt;
	OM_uint32 maj_status, min_status, ret_flags;
	u_int klen, kout, slen = 0, hashlen, strlen;
	DH *dh; 
	BIGNUM *dh_server_pub = NULL;
	BIGNUM *shared_secret = NULL;
	BIGNUM *p = NULL;
	BIGNUM *g = NULL;	
	u_char *kbuf, *hash;
	u_char *serverhostkey = NULL;
	u_char *empty = "";
	char *msg;
	char *lang;
	int type = 0;
	int first = 1;
	int nbits = 0, min = DH_GRP_MIN, max = DH_GRP_MAX;

	/* Initialise our GSSAPI world */	
	ssh_gssapi_build_ctx(&ctxt);
	if (ssh_gssapi_id_kex(ctxt, kex->name, kex->kex_type) 
	    == GSS_C_NO_OID)
		fatal("Couldn't identify host exchange");

	if (ssh_gssapi_import_name(ctxt, kex->gss_host))
		fatal("Couldn't import hostname");

	if (kex->gss_client && 
	    ssh_gssapi_client_identity(ctxt, kex->gss_client))
		fatal("Couldn't acquire client credentials");

	switch (kex->kex_type) {
	case KEX_GSS_GRP1_SHA1:
		dh = dh_new_group1();
		break;
	case KEX_GSS_GRP14_SHA1:
		dh = dh_new_group14();
		break;
	case KEX_GSS_GEX_SHA1:
		debug("Doing group exchange\n");
		nbits = dh_estimate(kex->we_need * 8);
		packet_start(SSH2_MSG_KEXGSS_GROUPREQ);
		packet_put_int(min);
		packet_put_int(nbits);
		packet_put_int(max);

		packet_send();

		packet_read_expect(SSH2_MSG_KEXGSS_GROUP);

		if ((p = BN_new()) == NULL)
			fatal("BN_new() failed");
		packet_get_bignum2(p);
		if ((g = BN_new()) == NULL)
			fatal("BN_new() failed");
		packet_get_bignum2(g);
		packet_check_eom();

		if (BN_num_bits(p) < min || BN_num_bits(p) > max)
			fatal("GSSGRP_GEX group out of range: %d !< %d !< %d",
			    min, BN_num_bits(p), max);

		dh = dh_new_group(g, p);
		break;
	default:
		fatal("%s: Unexpected KEX type %d", __func__, kex->kex_type);
	}
	
	/* Step 1 - e is dh->pub_key */
	dh_gen_key(dh, kex->we_need * 8);

	/* This is f, we initialise it now to make life easier */
	dh_server_pub = BN_new();
	if (dh_server_pub == NULL)
		fatal("dh_server_pub == NULL");

	token_ptr = GSS_C_NO_BUFFER;
			 
	do {
		debug("Calling gss_init_sec_context");
		
		maj_status = ssh_gssapi_init_ctx(ctxt,
		    kex->gss_deleg_creds, token_ptr, &send_tok,
		    &ret_flags);

		if (GSS_ERROR(maj_status)) {
			if (send_tok.length != 0) {
				packet_start(SSH2_MSG_KEXGSS_CONTINUE);
				packet_put_string(send_tok.value,
				    send_tok.length);
			}
			fatal("gss_init_context failed");
		}

		/* If we've got an old receive buffer get rid of it */
		if (token_ptr != GSS_C_NO_BUFFER)
			xfree(recv_tok.value);

		if (maj_status == GSS_S_COMPLETE) {
			/* If mutual state flag is not true, kex fails */
			if (!(ret_flags & GSS_C_MUTUAL_FLAG))
				fatal("Mutual authentication failed");

			/* If integ avail flag is not true kex fails */
			if (!(ret_flags & GSS_C_INTEG_FLAG))
				fatal("Integrity check failed");
		}

		/* 
		 * If we have data to send, then the last message that we
		 * received cannot have been a 'complete'. 
		 */
		if (send_tok.length != 0) {
			if (first) {
				packet_start(SSH2_MSG_KEXGSS_INIT);
				packet_put_string(send_tok.value,
				    send_tok.length);
				packet_put_bignum2(dh->pub_key);
				first = 0;
			} else {
				packet_start(SSH2_MSG_KEXGSS_CONTINUE);
				packet_put_string(send_tok.value,
				    send_tok.length);
			}
			packet_send();
			gss_release_buffer(&min_status, &send_tok);

			/* If we've sent them data, they should reply */
			do {	
				type = packet_read();
				if (type == SSH2_MSG_KEXGSS_HOSTKEY) {
					debug("Received KEXGSS_HOSTKEY");
					if (serverhostkey)
						fatal("Server host key received more than once");
					serverhostkey = 
					    packet_get_string(&slen);
				}
			} while (type == SSH2_MSG_KEXGSS_HOSTKEY);

			switch (type) {
			case SSH2_MSG_KEXGSS_CONTINUE:
				debug("Received GSSAPI_CONTINUE");
				if (maj_status == GSS_S_COMPLETE) 
					fatal("GSSAPI Continue received from server when complete");
				recv_tok.value = packet_get_string(&strlen);
				recv_tok.length = strlen; 
				break;
			case SSH2_MSG_KEXGSS_COMPLETE:
				debug("Received GSSAPI_COMPLETE");
				packet_get_bignum2(dh_server_pub);
				msg_tok.value =  packet_get_string(&strlen);
				msg_tok.length = strlen; 

				/* Is there a token included? */
				if (packet_get_char()) {
					recv_tok.value=
					    packet_get_string(&strlen);
					recv_tok.length = strlen;
					/* If we're already complete - protocol error */
					if (maj_status == GSS_S_COMPLETE)
						packet_disconnect("Protocol error: received token when complete");
					} else {
						/* No token included */
						if (maj_status != GSS_S_COMPLETE)
							packet_disconnect("Protocol error: did not receive final token");
				}
				break;
			case SSH2_MSG_KEXGSS_ERROR:
				debug("Received Error");
				maj_status = packet_get_int();
				min_status = packet_get_int();
				msg = packet_get_string(NULL);
				lang = packet_get_string(NULL);
				fatal("GSSAPI Error: \n%.400s",msg);
			default:
				packet_disconnect("Protocol error: didn't expect packet type %d",
		    		type);
			}
			token_ptr = &recv_tok;
		} else {
			/* No data, and not complete */
			if (maj_status != GSS_S_COMPLETE)
				fatal("Not complete, and no token output");
		}
	} while (maj_status & GSS_S_CONTINUE_NEEDED);

	/* 
	 * We _must_ have received a COMPLETE message in reply from the 
	 * server, which will have set dh_server_pub and msg_tok 
	 */

	if (type != SSH2_MSG_KEXGSS_COMPLETE)
		fatal("Didn't receive a SSH2_MSG_KEXGSS_COMPLETE when I expected it");

	/* Check f in range [1, p-1] */
	if (!dh_pub_is_valid(dh, dh_server_pub))
		packet_disconnect("bad server public DH value");

	/* compute K=f^x mod p */
	klen = DH_size(dh);
	kbuf = xmalloc(klen);
	kout = DH_compute_key(kbuf, dh_server_pub, dh);
	if (kout < 0)
		fatal("DH_compute_key: failed");

	shared_secret = BN_new();
	if (shared_secret == NULL)
		fatal("kexgss_client: BN_new failed");

	if (BN_bin2bn(kbuf, kout, shared_secret) == NULL)
		fatal("kexdh_client: BN_bin2bn failed");

	memset(kbuf, 0, klen);
	xfree(kbuf);

	switch (kex->kex_type) {
	case KEX_GSS_GRP1_SHA1:
	case KEX_GSS_GRP14_SHA1:
		kex_dh_hash( kex->client_version_string, 
		    kex->server_version_string,
		    buffer_ptr(&kex->my), buffer_len(&kex->my),
		    buffer_ptr(&kex->peer), buffer_len(&kex->peer),
		    (serverhostkey ? serverhostkey : empty), slen,
		    dh->pub_key,	/* e */
		    dh_server_pub,	/* f */
		    shared_secret,	/* K */
		    &hash, &hashlen
		);
		break;
	case KEX_GSS_GEX_SHA1:
		kexgex_hash(
		    kex->evp_md,
		    kex->client_version_string,
		    kex->server_version_string,
		    buffer_ptr(&kex->my), buffer_len(&kex->my),
		    buffer_ptr(&kex->peer), buffer_len(&kex->peer),
		    (serverhostkey ? serverhostkey : empty), slen,
 		    min, nbits, max,
		    dh->p, dh->g,
		    dh->pub_key,
		    dh_server_pub,
		    shared_secret,
		    &hash, &hashlen
		);
		break;
	default:
		fatal("%s: Unexpected KEX type %d", __func__, kex->kex_type);
	}

	gssbuf.value = hash;
	gssbuf.length = hashlen;

	/* Verify that the hash matches the MIC we just got. */
	if (GSS_ERROR(ssh_gssapi_checkmic(ctxt, &gssbuf, &msg_tok)))
		packet_disconnect("Hash's MIC didn't verify");

	xfree(msg_tok.value);

	DH_free(dh);
	if (serverhostkey)
		xfree(serverhostkey);
	BN_clear_free(dh_server_pub);

	/* save session id */
	if (kex->session_id == NULL) {
		kex->session_id_len = hashlen;
		kex->session_id = xmalloc(kex->session_id_len);
		memcpy(kex->session_id, hash, kex->session_id_len);
	}

	if (kex->gss_deleg_creds)
		ssh_gssapi_credentials_updated(ctxt);

	if (gss_kex_context == NULL)
		gss_kex_context = ctxt;
	else
		ssh_gssapi_delete_ctx(&ctxt);

	kex_derive_keys(kex, hash, hashlen, shared_secret);
	BN_clear_free(shared_secret);
	kex_finish(kex);
}
Exemplo n.º 19
0
static void
server_input_global_request(int type, u_int32_t seq, void *ctxt)
{
	char *rtype;
	int want_reply;
	int success = 0, allocated_listen_port = 0;

	rtype = packet_get_string(NULL);
	want_reply = packet_get_char();
	debug("server_input_global_request: rtype %s want_reply %d", rtype, want_reply);

	/* -R style forwarding */
	if (strcmp(rtype, "tcpip-forward") == 0) {
		struct passwd *pw;
		char *listen_address;
		u_short listen_port;

		pw = the_authctxt->pw;
		if (pw == NULL || !the_authctxt->valid)
			fatal("server_input_global_request: no/invalid user");
		listen_address = packet_get_string(NULL);
		listen_port = (u_short)packet_get_int();
		debug("server_input_global_request: tcpip-forward listen %s port %d",
		    listen_address, listen_port);

		/* check permissions */
		if ((options.allow_tcp_forwarding & FORWARD_REMOTE) == 0 ||
		    no_port_forwarding_flag ||
		    (!want_reply && listen_port == 0)
#ifndef NO_IPPORT_RESERVED_CONCEPT
		    || (listen_port != 0 && listen_port < IPPORT_RESERVED &&
                    pw->pw_uid != 0)
#endif
		    ) {
			success = 0;
			packet_send_debug("Server has disabled port forwarding.");
		} else {
			/* Start listening on the port */
			success = channel_setup_remote_fwd_listener(
			    listen_address, listen_port,
			    &allocated_listen_port, options.gateway_ports);
		}
		free(listen_address);
	} else if (strcmp(rtype, "cancel-tcpip-forward") == 0) {
		char *cancel_address;
		u_short cancel_port;

		cancel_address = packet_get_string(NULL);
		cancel_port = (u_short)packet_get_int();
		debug("%s: cancel-tcpip-forward addr %s port %d", __func__,
		    cancel_address, cancel_port);

		success = channel_cancel_rport_listener(cancel_address,
		    cancel_port);
		free(cancel_address);
	} else if (strcmp(rtype, "*****@*****.**") == 0) {
		no_more_sessions = 1;
		success = 1;
	}
	if (want_reply) {
		packet_start(success ?
		    SSH2_MSG_REQUEST_SUCCESS : SSH2_MSG_REQUEST_FAILURE);
		if (success && allocated_listen_port > 0)
			packet_put_int(allocated_listen_port);
		packet_send();
		packet_write_wait();
	}
	free(rtype);
}
Exemplo n.º 20
0
void do_connection(int privileged_port)
{
    int i;
    MP_INT session_key_int;
    unsigned char session_key[SSH_SESSION_KEY_LENGTH];
    unsigned char check_bytes[8];
    char *user;
    unsigned int cipher_type, auth_mask, protocol_flags;

    /* Generate check bytes that the client must send back in the user packet
       in order for it to be accepted; this is used to defy ip spoofing 
       attacks.  Note that this only works against somebody doing IP spoofing 
       from a remote machine; any machine on the local network can still see 
       outgoing packets and catch the random cookie.  This only affects
       rhosts authentication, and this is one of the reasons why it is
       inherently insecure. */
    for (i = 0; i < 8; i++)
        check_bytes[i] = random_get_byte(&sensitive_data.random_state);

    /* Send our public key.  We include in the packet 64 bits of random
       data that must be matched in the reply in order to prevent IP spoofing. */
    packet_start(SSH_SMSG_PUBLIC_KEY);
    for (i = 0; i < 8; i++)
        packet_put_char(check_bytes[i]);

    /* Store our public server RSA key. */
    packet_put_int(public_key.bits);
    packet_put_mp_int(&public_key.e);
    packet_put_mp_int(&public_key.n);

    /* Store our public host RSA key. */
    packet_put_int(sensitive_data.host_key.bits);
    packet_put_mp_int(&sensitive_data.host_key.e);
    packet_put_mp_int(&sensitive_data.host_key.n);

    /* Put protocol flags. */
    packet_put_int(SSH_PROTOFLAG_HOST_IN_FWD_OPEN);

    /* Declare which ciphers we support. */
    packet_put_int(cipher_mask());

    /* Declare supported authentication types. */
    auth_mask = 0;
    if (options.rhosts_authentication)
        auth_mask |= 1 << SSH_AUTH_RHOSTS;
    if (options.rhosts_rsa_authentication)
        auth_mask |= 1 << SSH_AUTH_RHOSTS_RSA;
    if (options.rsa_authentication)
        auth_mask |= 1 << SSH_AUTH_RSA;
    if (options.password_authentication)
        auth_mask |= 1 << SSH_AUTH_PASSWORD;
    packet_put_int(auth_mask);

    /* Send the packet and wait for it to be sent. */
    packet_send();
    packet_write_wait();

    debug("Sent %d bit public key and %d bit host key.", public_key.bits, sensitive_data.host_key.bits);

    /* Read clients reply (cipher type and session key). */
    packet_read_expect(SSH_CMSG_SESSION_KEY);

    /* Get cipher type. */
    cipher_type = packet_get_char();

    /* Get check bytes from the packet.  These must match those we sent earlier
       with the public key packet. */
    for (i = 0; i < 8; i++)
        if (check_bytes[i] != packet_get_char())
            packet_disconnect("IP Spoofing check bytes do not match.");

    debug("Encryption type: %.200s", cipher_name(cipher_type));

    /* Get the encrypted integer. */
    mpz_init(&session_key_int);
    packet_get_mp_int(&session_key_int);

    /* Get protocol flags. */
    protocol_flags = packet_get_int();
    packet_set_protocol_flags(protocol_flags);

    /* Decrypt it using our private server key and private host key (key with 
       larger modulus first). */
    if (mpz_cmp(&sensitive_data.private_key.n, &sensitive_data.host_key.n) > 0) {
        /* Private key has bigger modulus. */
        assert(sensitive_data.private_key.bits >= sensitive_data.host_key.bits + SSH_KEY_BITS_RESERVED);
        rsa_private_decrypt(&session_key_int, &session_key_int, &sensitive_data.private_key);
        rsa_private_decrypt(&session_key_int, &session_key_int, &sensitive_data.host_key);
    } else {
        /* Host key has bigger modulus (or they are equal). */
        assert(sensitive_data.host_key.bits >= sensitive_data.private_key.bits + SSH_KEY_BITS_RESERVED);
        rsa_private_decrypt(&session_key_int, &session_key_int, &sensitive_data.host_key);
        rsa_private_decrypt(&session_key_int, &session_key_int, &sensitive_data.private_key);
    }

    /* Compute session id for this session. */
    compute_session_id(session_id, check_bytes, sensitive_data.host_key.bits, &sensitive_data.host_key.n, sensitive_data.private_key.bits, &sensitive_data.private_key.n);

    /* Extract session key from the decrypted integer.  The key is in the 
       least significant 256 bits of the integer; the first byte of the 
       key is in the highest bits. */
    mp_linearize_msb_first(session_key, sizeof(session_key), &session_key_int);

    /* Xor the first 16 bytes of the session key with the session id. */
    for (i = 0; i < 16; i++)
        session_key[i] ^= session_id[i];

    /* Destroy the decrypted integer.  It is no longer needed. */
    mpz_clear(&session_key_int);

    /* Set the session key.  From this on all communications will be
       encrypted. */
    packet_set_encryption_key(session_key, SSH_SESSION_KEY_LENGTH, cipher_type, 0);

    /* Destroy our copy of the session key.  It is no longer needed. */
    memset(session_key, 0, sizeof(session_key));

    debug("Received session key; encryption turned on.");

    /* Send an acknowledgement packet.  Note that this packet is sent
       encrypted. */
    packet_start(SSH_SMSG_SUCCESS);
    packet_send();
    packet_write_wait();

    /* Get the name of the user that we wish to log in as. */
    packet_read_expect(SSH_CMSG_USER);

    /* Get the user name. */
    user = packet_get_string(NULL);

    /* Destroy the private and public keys.  They will no longer be needed. */
    rsa_clear_public_key(&public_key);
    rsa_clear_private_key(&sensitive_data.private_key);
    rsa_clear_private_key(&sensitive_data.host_key);

    /* Do the authentication. */
    do_authentication(user, privileged_port, cipher_type);
}
Exemplo n.º 21
0
static int
userauth_pubkey(Authctxt *authctxt)
{
  #ifdef WIN32_FIXME
  
  int loginStat = 1;

  char currentUser[MAX_PATH] = {0};
  
  DWORD currentUserSize = sizeof(currentUser);
  
  int targetIsCurrent = 0;

  # ifdef USE_NTCREATETOKEN
  int doOpenSSHVerify = 1;
  # else
  int doOpenSSHVerify = 0;
  # endif

  #endif
  
	Buffer b;
	Key *key = NULL;
	char *pkalg, *userstyle;
	u_char *pkblob, *sig;
	u_int alen, blen, slen;
	int have_sig, pktype;
	int authenticated = 0;

	if (!authctxt->valid) {
		debug2("userauth_pubkey: disabled because of invalid user");
		return 0;
	}
	have_sig = packet_get_char();
	if (datafellows & SSH_BUG_PKAUTH) {
		debug2("userauth_pubkey: SSH_BUG_PKAUTH");
		/* no explicit pkalg given */
		pkblob = packet_get_string(&blen);
		buffer_init(&b);
		buffer_append(&b, pkblob, blen);
		/* so we have to extract the pkalg from the pkblob */
		pkalg = buffer_get_string(&b, &alen);
		buffer_free(&b);
	} else {
		pkalg = packet_get_string(&alen);
		pkblob = packet_get_string(&blen);
	}
	pktype = key_type_from_name(pkalg);
	if (pktype == KEY_UNSPEC) {
		/* this is perfectly legal */
		logit("userauth_pubkey: unsupported public key algorithm: %s",
		    pkalg);
		goto done;
	}
	key = key_from_blob(pkblob, blen);
	if (key == NULL) {
		error("userauth_pubkey: cannot decode key: %s", pkalg);
		goto done;
	}
	if (key->type != pktype) {
		error("userauth_pubkey: type mismatch for decoded key "
		    "(received %d, expected %d)", key->type, pktype);
		goto done;
	}
	if (key_type_plain(key->type) == KEY_RSA &&
	    (datafellows & SSH_BUG_RSASIGMD5) != 0) {
		logit("Refusing RSA key because client uses unsafe "
		    "signature scheme");
		goto done;
	}
	if (auth2_userkey_already_used(authctxt, key)) {
		logit("refusing previously-used %s key", key_type(key));
		goto done;
	}
	if (match_pattern_list(sshkey_ssh_name(key),
	    options.pubkey_key_types, 0) != 1) {
		logit("%s: key type %s not in PubkeyAcceptedKeyTypes",
		    __func__, sshkey_ssh_name(key));
		goto done;
	}

	if (have_sig) {
		sig = packet_get_string(&slen);
		packet_check_eom();
		buffer_init(&b);
		if (datafellows & SSH_OLD_SESSIONID) {
			buffer_append(&b, session_id2, session_id2_len);
		} else {
			buffer_put_string(&b, session_id2, session_id2_len);
		}
		/* reconstruct packet */
		buffer_put_char(&b, SSH2_MSG_USERAUTH_REQUEST);
		xasprintf(&userstyle, "%s%s%s", authctxt->user,
		    authctxt->style ? ":" : "",
		    authctxt->style ? authctxt->style : "");
		buffer_put_cstring(&b, userstyle);
		free(userstyle);
		buffer_put_cstring(&b,
		    datafellows & SSH_BUG_PKSERVICE ?
		    "ssh-userauth" :
		    authctxt->service);
		if (datafellows & SSH_BUG_PKAUTH) {
			buffer_put_char(&b, have_sig);
		} else {
			buffer_put_cstring(&b, "publickey");
			buffer_put_char(&b, have_sig);
			buffer_put_cstring(&b, pkalg);
		}
		buffer_put_string(&b, pkblob, blen);
#ifdef DEBUG_PK
		buffer_dump(&b);
#endif
		pubkey_auth_info(authctxt, key, NULL);

		/* test for correct signature */
		authenticated = 0;
   /*
     * On pure win32 try to logon using lsa first.
     */

    #ifdef WIN32_FIXME

    authctxt -> hTokenLsa_ = NULL;
    authctxt -> methoddata = NULL;
 
    /*
     * Retrieve name of current login user (i.e. sshd process owner).
     */
     
    GetUserName(currentUser, &currentUserSize);

    /*
     * Try to get token from lsa, but only if targetUser != currentUser.
     * Owerthise we already have targetUser's token in current thread, so
     * we only need key verify from original OpenSSH code.
     */

    targetIsCurrent = (strcmp(currentUser, authctxt -> user) == 0);
    
    if (targetIsCurrent)
    {
      doOpenSSHVerify = 1;
    }
    else
    {
      loginStat = LsaLogon(&authctxt -> hTokenLsa_, HomeDirLsaW,
                               authctxt -> user, pkblob, blen, sig, slen,
                                 buffer_ptr(&b), buffer_len(&b), datafellows);

      /*
       * If lsa logon process success.
       */
  
      if (loginStat == 0)
      {
        /*
         * And user authorized OK.
         */
    
        if (authctxt -> hTokenLsa_)
        {
          doOpenSSHVerify = 0;
          
          /*
           * This is part of openssh authorization needed for parsing
           * 'options' block in key.
           */
      
          authctxt -> pw -> pw_dir = GetHomeDir(authctxt -> user);
      
          if (PRIVSEP(user_key_allowed(authctxt -> pw, key, 1))) // PRAGMA:TODO
          {
            authenticated = 1;
          }
          else
          {
            authenticated = 0;
          }
          
          buffer_free(&b);

          free(sig);
        }
      }
    }
    
    if (doOpenSSHVerify)
    {
      /*
       * If lsa fails, test for correct signature using openssh code.
       */
      
      authctxt -> pw -> pw_dir = GetHomeDir(authctxt -> user);
  
      if (PRIVSEP(user_key_allowed(authctxt->pw, key, 0))  //PRAGMA:TODO
		  &&
              PRIVSEP(key_verify(key, sig, slen, buffer_ptr(&b), buffer_len(&b))) == 1)
    
      {
        authenticated = 1;
      }
    }
    
    /*
     * Original code.
     */

    #else /* #ifdef WIN32_FIXME */

		if (PRIVSEP(user_key_allowed(authctxt->pw, key, 1)) &&
		    PRIVSEP(key_verify(key, sig, slen, buffer_ptr(&b),
		    buffer_len(&b))) == 1) {
			authenticated = 1;
			/* Record the successful key to prevent reuse */
			auth2_record_userkey(authctxt, key);
			key = NULL; /* Don't free below */
		}
		buffer_free(&b);
		free(sig);
   #endif /* else #ifdef WIN32_FIXME. */

	} else {
		debug("test whether pkalg/pkblob are acceptable");
		packet_check_eom();

		/* XXX fake reply and always send PK_OK ? */
		/*
		 * XXX this allows testing whether a user is allowed
		 * to login: if you happen to have a valid pubkey this
		 * message is sent. the message is NEVER sent at all
		 * if a user is not allowed to login. is this an
		 * issue? -markus
		 */
		

      #ifndef WIN32_FIXME

     if (PRIVSEP(user_key_allowed(authctxt->pw, key, 0)))  
 
      #endif		
		{
			packet_start(SSH2_MSG_USERAUTH_PK_OK);
			packet_put_string(pkalg, alen);
			packet_put_string(pkblob, blen);
			packet_send();
			packet_write_wait();
			authctxt->postponed = 1;
		}
	}
	if (authenticated != 1)
		auth_clear_options();
done:
	debug2("userauth_pubkey: authenticated %d pkalg %s", authenticated, pkalg);
	if (key != NULL)
		key_free(key);
	free(pkalg);
	free(pkblob);
	return authenticated;
}