/**
* @brief Sets the transceiver to sleep
*
* This function sets the transceiver to sleep state.
*
* @param mode Defines sleep mode of transceiver SLEEP or PHY_TRX_OFF)
*
* @return TAL_BUSY - The transceiver is busy in TX or RX
* MAC_SUCCESS - The transceiver is put to sleep
* TAL_TRX_ASLEEP - The transceiver is already asleep
* MAC_INVALID_PARAMETER - The specified sleep mode is not supported
*/
retval_t tal_trx_sleep(sleep_mode_t mode)
{
tal_trx_status_t trx_status;
/* Current transceiver only supports SLEEP_MODE_1 mode. */
if (SLEEP_MODE_1 != mode)
{
return MAC_INVALID_PARAMETER;
}
if (tal_trx_status == TRX_SLEEP)
{
return TAL_TRX_ASLEEP;
}
/* Device can be put to sleep only when the TAL is in IDLE state. */
if (TAL_IDLE != tal_state)
{
return TAL_BUSY;
}
tal_rx_on_required = false;
/*
* First set trx to TRX_OFF.
* If trx is busy, like ACK transmission, do not interrupt it.
*/
do
{
trx_status = set_trx_state(CMD_TRX_OFF);
}
while (trx_status != TRX_OFF);
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_SLEEP);
trx_status = set_trx_state(CMD_SLEEP);
#ifdef ENABLE_FTN_PLL_CALIBRATION
/*
* Stop the calibration timer now.
* The timer will be restarted during wake-up.
*/
pal_timer_stop(TAL_CALIBRATION);
#endif /* ENABLE_FTN_PLL_CALIBRATION */
if (trx_status == TRX_SLEEP)
{
#ifdef STB_ON_SAL
#if (SAL_TYPE == AT86RF2xx)
stb_restart();
#endif
#endif
return MAC_SUCCESS;
}
else
{
/* State could not be set due to TAL_BUSY state. */
return TAL_BUSY;
}
}
/**
* @brief MAC function to put the radio to sleep mode
*/
void mac_trx_init_sleep(void)
{
/* If the radio is not sleeping, it is put to sleep */
if (RADIO_AWAKE == mac_radio_sleep_state) {
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_SLEEP);
#ifdef ENABLE_DEEP_SLEEP
if (MAC_SUCCESS == tal_trx_sleep(DEEP_SLEEP_MODE))
#else
if (MAC_SUCCESS == tal_trx_sleep(SLEEP_MODE_1))
#endif
{
mac_radio_sleep_state = RADIO_SLEEPING;
} else {
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_AWAKE);
}
}
}
/**
* @brief MAC function to wake-up the radio from sleep state
*/
void mac_trx_wakeup(void)
{
/* If the radio is sleeping, it is woken-up */
if (RADIO_SLEEPING == mac_radio_sleep_state) {
if (FAILURE != tal_trx_wakeup()) {
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_AWAKE);
mac_radio_sleep_state = RADIO_AWAKE;
}
}
}
/*
* @brief Internal MAC reset function
*
* This function resets the MAC variables, stops all running timers and
* initializes the PIBs.
*
* @param init_pib Boolean indicates whether PIB attributes shall be
* initialized or not.
*
* @return Success or failure status
*/
static uint8_t mac_reset(uint8_t init_pib)
{
uint8_t status = MAC_DISABLE_TRX_FAILURE;
/*
* Transceiver is going to stop giving out clock for some time
* so change to internal clock
*/
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_SLEEP);
/* Reset TAL */
status = tal_reset(init_pib);
/* Transceiver is now giving out clock, switch back to external clock */
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_AWAKE);
mac_soft_reset(init_pib);
return status;
}
/**
* @brief Wakes up the transceiver from sleep
*
* This function awakes the transceiver from sleep state.
*
* @return TAL_TRX_AWAKE - The transceiver is already awake
* MAC_SUCCESS - The transceiver is woken up from sleep
* FAILURE - The transceiver did not wake-up from sleep
*/
retval_t tal_trx_wakeup(void)
{
tal_trx_status_t trx_status;
if (tal_trx_status != TRX_SLEEP)
{
return TAL_TRX_AWAKE;
}
#ifdef ENABLE_FTN_PLL_CALIBRATION
{
retval_t timer_status;
/*
* Calibration timer has been stopped when going to sleep,
* so it needs to be restarted.
* All other state changes except via sleep that are ensuring
* implicit filter tuning and pll calibration are ignored.
* Therefore the calibration timer needs to be restarted for
* to those cases.
* This is handled in file tal.c.
*/
/* Start periodic calibration timer.*/
timer_status = pal_timer_start(TAL_CALIBRATION,
TAL_CALIBRATION_TIMEOUT_US,
TIMEOUT_RELATIVE,
(FUNC_PTR)calibration_timer_handler_cb,
NULL);
if (timer_status != MAC_SUCCESS)
{
ASSERT("PLL calibration timer start problem" == 0);
}
}
#endif /* ENABLE_FTN_PLL_CALIBRATION */
trx_status = set_trx_state(CMD_TRX_OFF);
if (trx_status == TRX_OFF)
{
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_AWAKE);
return MAC_SUCCESS;
}
else
{
return FAILURE;
}
}
/**
* @brief Sets the transceiver to sleep
*
* This function sets the transceiver to sleep state.
*
* @param mode Defines sleep mode of transceiver SLEEP or PHY_TRX_OFF)
*
* @return TAL_BUSY - The transceiver is busy in TX or RX
* MAC_SUCCESS - The transceiver is put to sleep
* TAL_TRX_ASLEEP - The transceiver is already asleep
* MAC_INVALID_PARAMETER - The specified sleep mode is not supported
*/
retval_t tal_trx_sleep(sleep_mode_t mode)
{
tal_trx_status_t trx_status;
/* Current transceiver only supports SLEEP_MODE_1 mode. */
if (SLEEP_MODE_1 != mode)
{
return MAC_INVALID_PARAMETER;
}
if (tal_trx_status == TRX_SLEEP)
{
return TAL_TRX_ASLEEP;
}
/* Device can be put to sleep only when the TAL is in IDLE state. */
if (TAL_IDLE != tal_state)
{
return TAL_BUSY;
}
/*
* First set trx to TRX_OFF.
* If trx is busy, like ACK transmission, do not interrupt it.
*/
do
{
trx_status = set_trx_state(CMD_TRX_OFF);
} while (trx_status != TRX_OFF);
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_SLEEP);
trx_status = set_trx_state(CMD_TRX_SLEEP);
if (trx_status == TRX_SLEEP)
{
return MAC_SUCCESS;
}
else
{
/* State could not be set due to TAL_BUSY state. */
return TAL_BUSY;
}
}
/**
* @brief Wakes up the transceiver from sleep
*
* This function awakes the transceiver from sleep state.
*
* @return TAL_TRX_AWAKE - The transceiver is already awake
* MAC_SUCCESS - The transceiver is woken up from sleep
* FAILURE - The transceiver did not wake-up from sleep
*/
retval_t tal_trx_wakeup(void)
{
tal_trx_status_t trx_status;
if (tal_trx_status != TRX_SLEEP)
{
return TAL_TRX_AWAKE;
}
trx_status = set_trx_state(CMD_TRX_OFF);
if (trx_status == TRX_OFF)
{
pal_timer_source_select(TMR_CLK_SRC_DURING_TRX_AWAKE);
return MAC_SUCCESS;
}
else
{
return FAILURE;
}
}
