static const char *
parse_version_string (const char *s, int *major, int *minor)
{
s = parse_version_number (s, major);
if (!s || *s != '.')
return NULL;
s++;
s = parse_version_number (s, minor);
if (!s)
return NULL;
return s; /* Patchlevel. */
}
const char *
parse_version_string (const char *s, int *major, int *minor, int *micro)
{
if (!s)
return NULL;
*major = parse_version_number (&s);
if (*s != '.')
return NULL;
s++;
*minor = parse_version_number (&s);
if (*s != '.')
return NULL;
s++;
*micro = parse_version_number (&s);
return s;
}
/* The parse version functions were copied from libgcrypt.
*/
static const char *
parse_version_string (const char *s, int *major, int *minor, int *micro)
{
s = parse_version_number (s, major);
if (!s || *s != '.')
return NULL;
s++;
s = parse_version_number (s, minor);
if (!s)
return NULL;
if (*s != '.')
{
*micro = 0;
return s;
}
s++;
s = parse_version_number (s, micro);
if (!s)
return NULL;
return s; /* patchlevel */
}
static void PRS(int argc, char *argv[])
{
int b, c;
int size;
char *tmp, *tmp2;
int blocksize = 0;
int inode_ratio = 0;
int inode_size = 0;
double reserved_ratio = 5.0;
int sector_size = 0;
int show_version_only = 0;
ext2_ino_t num_inodes = 0;
errcode_t retval;
char * oldpath = getenv("PATH");
char * extended_opts = 0;
const char * fs_type = 0;
blk_t dev_size;
#ifdef __linux__
struct utsname ut;
#endif
long sysval;
int s_opt = -1, r_opt = -1;
char *fs_features = 0;
int use_bsize;
/* Update our PATH to include /sbin */
if (oldpath) {
char *newpath;
newpath = malloc(sizeof (PATH_SET) + 1 + strlen (oldpath));
strcpy (newpath, PATH_SET);
strcat (newpath, ":");
strcat (newpath, oldpath);
putenv (newpath);
} else
putenv (PATH_SET);
tmp = getenv("MKE2FS_SYNC");
if (tmp)
sync_kludge = atoi(tmp);
/* Determine the system page size if possible */
#ifdef HAVE_SYSCONF
#if (!defined(_SC_PAGESIZE) && defined(_SC_PAGE_SIZE))
#define _SC_PAGESIZE _SC_PAGE_SIZE
#endif
#ifdef _SC_PAGESIZE
sysval = sysconf(_SC_PAGESIZE);
if (sysval > 0)
sys_page_size = sysval;
#endif /* _SC_PAGESIZE */
#endif /* HAVE_SYSCONF */
if ((tmp = getenv("MKE2FS_CONFIG")) != NULL)
config_fn[0] = tmp;
profile_set_syntax_err_cb(syntax_err_report);
profile_init(config_fn, &profile);
setbuf(stdout, NULL);
setbuf(stderr, NULL);
initialize_ext2_error_table();
memset(&fs_param, 0, sizeof(struct ext2_super_block));
fs_param.s_rev_level = 1; /* Create revision 1 filesystems now */
#ifdef __linux__
if (uname(&ut)) {
perror("uname");
exit(1);
}
linux_version_code = parse_version_number(ut.release);
if (linux_version_code && linux_version_code < (2*65536 + 2*256))
fs_param.s_rev_level = 0;
#endif
if (argc && *argv) {
program_name = get_progname(*argv);
/* If called as mkfs.ext3, create a journal inode */
if (!strcmp(program_name, "mkfs.ext3"))
journal_size = -1;
}
while ((c = getopt (argc, argv,
"b:cf:g:i:jl:m:no:qr:s:tvE:FI:J:L:M:N:O:R:ST:V")) != EOF) {
switch (c) {
case 'b':
blocksize = strtol(optarg, &tmp, 0);
b = (blocksize > 0) ? blocksize : -blocksize;
if (b < EXT2_MIN_BLOCK_SIZE ||
b > EXT2_MAX_BLOCK_SIZE || *tmp) {
com_err(program_name, 0,
_("invalid block size - %s"), optarg);
exit(1);
}
if (blocksize > 4096)
fprintf(stderr, _("Warning: blocksize %d not "
"usable on most systems.\n"),
blocksize);
if (blocksize > 0)
fs_param.s_log_block_size =
int_log2(blocksize >>
EXT2_MIN_BLOCK_LOG_SIZE);
break;
case 'c': /* Check for bad blocks */
case 't': /* deprecated */
cflag++;
break;
case 'f':
size = strtoul(optarg, &tmp, 0);
if (size < EXT2_MIN_BLOCK_SIZE ||
size > EXT2_MAX_BLOCK_SIZE || *tmp) {
com_err(program_name, 0,
_("invalid fragment size - %s"),
optarg);
exit(1);
}
fs_param.s_log_frag_size =
int_log2(size >> EXT2_MIN_BLOCK_LOG_SIZE);
fprintf(stderr, _("Warning: fragments not supported. "
"Ignoring -f option\n"));
break;
case 'g':
fs_param.s_blocks_per_group = strtoul(optarg, &tmp, 0);
if (*tmp) {
com_err(program_name, 0,
_("Illegal number for blocks per group"));
exit(1);
}
if ((fs_param.s_blocks_per_group % 8) != 0) {
com_err(program_name, 0,
_("blocks per group must be multiple of 8"));
exit(1);
}
break;
case 'i':
inode_ratio = strtoul(optarg, &tmp, 0);
if (inode_ratio < EXT2_MIN_BLOCK_SIZE ||
inode_ratio > EXT2_MAX_BLOCK_SIZE * 1024 ||
*tmp) {
com_err(program_name, 0,
_("invalid inode ratio %s (min %d/max %d)"),
optarg, EXT2_MIN_BLOCK_SIZE,
EXT2_MAX_BLOCK_SIZE);
exit(1);
}
break;
case 'J':
parse_journal_opts(optarg);
break;
case 'j':
if (!journal_size)
journal_size = -1;
break;
case 'l':
bad_blocks_filename = malloc(strlen(optarg)+1);
if (!bad_blocks_filename) {
com_err(program_name, ENOMEM,
_("in malloc for bad_blocks_filename"));
exit(1);
}
strcpy(bad_blocks_filename, optarg);
break;
case 'm':
reserved_ratio = strtod(optarg, &tmp);
if (reserved_ratio > 50 || *tmp) {
com_err(program_name, 0,
_("invalid reserved blocks percent - %s"),
optarg);
exit(1);
}
break;
case 'n':
noaction++;
break;
case 'o':
creator_os = optarg;
break;
case 'q':
quiet = 1;
break;
case 'r':
r_opt = strtoul(optarg, &tmp, 0);
if (*tmp) {
com_err(program_name, 0,
_("bad revision level - %s"), optarg);
exit(1);
}
fs_param.s_rev_level = r_opt;
break;
case 's': /* deprecated */
s_opt = atoi(optarg);
break;
#ifdef EXT2_DYNAMIC_REV
case 'I':
inode_size = strtoul(optarg, &tmp, 0);
if (*tmp) {
com_err(program_name, 0,
_("invalid inode size - %s"), optarg);
exit(1);
}
break;
#endif
case 'v':
verbose = 1;
break;
case 'F':
force = 1;
break;
case 'L':
volume_label = optarg;
break;
case 'M':
mount_dir = optarg;
break;
case 'N':
num_inodes = strtoul(optarg, &tmp, 0);
if (*tmp) {
com_err(program_name, 0,
_("bad num inodes - %s"), optarg);
exit(1);
}
break;
case 'O':
fs_features = optarg;
break;
case 'E':
case 'R':
extended_opts = optarg;
break;
case 'S':
super_only = 1;
break;
case 'T':
fs_type = optarg;
break;
case 'V':
/* Print version number and exit */
show_version_only++;
break;
default:
usage();
}
}
if ((optind == argc) && !show_version_only)
usage();
device_name = argv[optind++];
if (!quiet || show_version_only)
fprintf (stderr, "mke2fs %s (%s)\n", E2FSPROGS_VERSION,
E2FSPROGS_DATE);
if (show_version_only) {
fprintf(stderr, _("\tUsing %s\n"),
error_message(EXT2_ET_BASE));
exit(0);
}
/*
* If there's no blocksize specified and there is a journal
* device, use it to figure out the blocksize
*/
if (blocksize <= 0 && journal_device) {
ext2_filsys jfs;
io_manager io_ptr;
#ifdef CONFIG_TESTIO_DEBUG
io_ptr = test_io_manager;
test_io_backing_manager = unix_io_manager;
#else
io_ptr = unix_io_manager;
#endif
retval = ext2fs_open(journal_device,
EXT2_FLAG_JOURNAL_DEV_OK, 0,
0, io_ptr, &jfs);
if (retval) {
com_err(program_name, retval,
_("while trying to open journal device %s\n"),
journal_device);
exit(1);
}
if ((blocksize < 0) && (jfs->blocksize < (unsigned) (-blocksize))) {
com_err(program_name, 0,
_("Journal dev blocksize (%d) smaller than "
"minimum blocksize %d\n"), jfs->blocksize,
-blocksize);
exit(1);
}
blocksize = jfs->blocksize;
fs_param.s_log_block_size =
int_log2(blocksize >> EXT2_MIN_BLOCK_LOG_SIZE);
ext2fs_close(jfs);
}
bool ScanDataBuilder::Parse(char*& buffer, size_t& size) {
char* prev_buf = NULL;
bool success;
while (method_index <= 25) {
// std::cout << "method index: " << method_index <<std::endl;
prev_buf = buffer;
switch (method_index) {
case -1:
success = parse_byte(buffer, size, lms100_cola::STX_BYTE);
break;
case 0:
success = parse_command_type(buffer, size, data);
break;
case 1:
success = parse_command(buffer, size, data);
break;
case 2:
success = parse_version_number(buffer, size, data);
break;
case 3:
success = parse_device_number(buffer, size, data);
break;
case 4:
success = parse_serial_number(buffer, size, data);
break;
case 5:
success = parse_device_status(buffer, size, data);
break;
case 6:
success = parse_telegram_counter(buffer, size, data);
break;
case 7:
success = parse_scan_counter(buffer, size, data);
break;
case 8:
success = parse_time_since_startup(buffer, size, data);
break;
case 9:
success = parse_time_of_transmission(buffer, size, data);
break;
case 10:
success = parse_status_of_digital_inputs(buffer, size, data);
break;
case 11:
success = parse_status_of_digital_outputs(buffer, size, data);
break;
case 12:
success = parse_reserved_byte(buffer, size, data);
break;
case 13:
success = parse_scan_frequency(buffer, size, data);
break;
case 14:
success = parse_measurement_frequency(buffer, size, data);
break;
case 15:
success = parse_encoders(buffer, size, data);
break;
case 16:
success = parse_amount_of_16_bit_channels(buffer, size, data);
break;
case 17:
success = parse_content(buffer, size, data);
break;
case 18:
success = parse_scale_factor(buffer, size, data);
break;
case 19:
success = parse_scale_factor_offset(buffer, size, data);
break;
case 20:
success = parse_start_angle(buffer, size, data);
break;
case 21:
success = parse_steps(buffer, size, data);
break;
case 22:
success = parse_amount_of_data(buffer, size, data);
break;
case 23:
success = parse_data(buffer, size, data);
break;
case 24:
success = parse_irrelevant_data(buffer, size);
break;
case 25:
success = parse_byte(buffer, size, lms100_cola::ETX_BYTE);
break;
default:
return false;
}
// method didn't have enough data to parse
if (!success) {
return false;
}
method_index += 1;
}
return true;
}
errcode_t online_resize_fs(ext2_filsys fs, const char *mtpt,
blk64_t *new_size, int flags EXT2FS_ATTR((unused)))
{
#ifdef __linux__
struct ext2_new_group_input input;
struct ext4_new_group_input input64;
struct ext2_super_block *sb = fs->super;
unsigned long new_desc_blocks;
ext2_filsys new_fs;
errcode_t retval;
double percent;
dgrp_t i;
blk_t size;
int fd, overhead;
int use_old_ioctl = 1;
int no_meta_bg_resize = 0;
int no_resize_ioctl = 0;
if (getenv("RESIZE2FS_KERNEL_VERSION")) {
char *version_to_emulate = getenv("RESIZE2FS_KERNEL_VERSION");
int kvers = parse_version_number(version_to_emulate);
if (kvers < VERSION_CODE(3, 7, 0))
no_meta_bg_resize = 1;
if (kvers < VERSION_CODE(3, 3, 0))
no_resize_ioctl = 1;
}
if (ext2fs_has_feature_sparse_super2(fs->super) &&
(access("/sys/fs/ext4/features/sparse_super2", R_OK) != 0)) {
com_err(program_name, 0, _("kernel does not support online "
"resize with sparse_super2"));
exit(1);
}
printf(_("Filesystem at %s is mounted on %s; "
"on-line resizing required\n"), fs->device_name, mtpt);
if (*new_size < ext2fs_blocks_count(sb)) {
com_err(program_name, 0, _("On-line shrinking not supported"));
exit(1);
}
/*
* If the number of descriptor blocks is going to increase,
* the on-line resizing inode must be present.
*/
new_desc_blocks = ext2fs_div_ceil(
ext2fs_div64_ceil(*new_size -
fs->super->s_first_data_block,
EXT2_BLOCKS_PER_GROUP(fs->super)),
EXT2_DESC_PER_BLOCK(fs->super));
printf("old_desc_blocks = %lu, new_desc_blocks = %lu\n",
fs->desc_blocks, new_desc_blocks);
/*
* Do error checking to make sure the resize will be successful.
*/
if ((access("/sys/fs/ext4/features/meta_bg_resize", R_OK) != 0) ||
no_meta_bg_resize) {
if (!ext2fs_has_feature_resize_inode(fs->super) &&
(new_desc_blocks != fs->desc_blocks)) {
com_err(program_name, 0,
_("Filesystem does not support online resizing"));
exit(1);
}
if (ext2fs_has_feature_resize_inode(fs->super) &&
new_desc_blocks > (fs->desc_blocks +
fs->super->s_reserved_gdt_blocks)) {
com_err(program_name, 0,
_("Not enough reserved gdt blocks for resizing"));
exit(1);
}
if ((ext2fs_blocks_count(sb) > MAX_32_NUM) ||
(*new_size > MAX_32_NUM)) {
com_err(program_name, 0,
_("Kernel does not support resizing a file system this large"));
exit(1);
}
}
fd = open(mtpt, O_RDONLY);
if (fd < 0) {
com_err(program_name, errno,
_("while trying to open mountpoint %s"), mtpt);
exit(1);
}
if (no_resize_ioctl) {
printf(_("Old resize interface requested.\n"));
} else if (ioctl(fd, EXT4_IOC_RESIZE_FS, new_size)) {
/*
* If kernel does not support EXT4_IOC_RESIZE_FS, use the
* old online resize. Note that the old approach does not
* handle >32 bit file systems
*
* Sigh, if we are running a 32-bit binary on a 64-bit
* kernel (which happens all the time on the MIPS
* architecture in Debian, but can happen on other CPU
* architectures as well) we will get EINVAL returned
* when an ioctl doesn't exist, at least up to Linux
* 3.1. See compat_sys_ioctl() in fs/compat_ioctl.c
* in the kernel sources. This is probably a kernel
* bug, but work around it here.
*/
if ((errno != ENOTTY) && (errno != EINVAL)) {
if (errno == EPERM)
com_err(program_name, 0,
_("Permission denied to resize filesystem"));
else
com_err(program_name, errno,
_("While checking for on-line resizing "
"support"));
exit(1);
}
} else {
close(fd);
return 0;
}
size = ext2fs_blocks_count(sb);
if (ioctl(fd, EXT2_IOC_GROUP_EXTEND, &size)) {
if (errno == EPERM)
com_err(program_name, 0,
_("Permission denied to resize filesystem"));
else if (errno == ENOTTY)
com_err(program_name, 0,
_("Kernel does not support online resizing"));
else
com_err(program_name, errno,
_("While checking for on-line resizing support"));
exit(1);
}
percent = (ext2fs_r_blocks_count(sb) * 100.0) /
ext2fs_blocks_count(sb);
retval = ext2fs_read_bitmaps(fs);
if (retval) {
close(fd);
return retval;
}
retval = ext2fs_dup_handle(fs, &new_fs);
if (retval) {
close(fd);
return retval;
}
/* The current method of adding one block group at a time to a
* mounted filesystem means it is impossible to accommodate the
* flex_bg allocation method of placing the metadata together
* in a single block group. For now we "fix" this issue by
* using the traditional layout for new block groups, where
* each block group is self-contained and contains its own
* bitmap blocks and inode tables. This means we don't get
* the layout advantages of flex_bg in the new block groups,
* but at least it allows on-line resizing to function.
*/
ext2fs_clear_feature_flex_bg(new_fs->super);
retval = adjust_fs_info(new_fs, fs, 0, *new_size);
if (retval) {
close(fd);
return retval;
}
printf(_("Performing an on-line resize of %s to %llu (%dk) blocks.\n"),
fs->device_name, *new_size, fs->blocksize / 1024);
size = fs->group_desc_count * sb->s_blocks_per_group +
sb->s_first_data_block;
if (size > *new_size)
size = *new_size;
if (ioctl(fd, EXT2_IOC_GROUP_EXTEND, &size)) {
com_err(program_name, errno,
_("While trying to extend the last group"));
exit(1);
}
for (i = fs->group_desc_count;
i < new_fs->group_desc_count; i++) {
overhead = (int) (2 + new_fs->inode_blocks_per_group);
if (ext2fs_bg_has_super(new_fs, new_fs->group_desc_count - 1))
overhead += 1 + new_fs->desc_blocks +
new_fs->super->s_reserved_gdt_blocks;
input.group = i;
input.block_bitmap = ext2fs_block_bitmap_loc(new_fs, i);
input.inode_bitmap = ext2fs_inode_bitmap_loc(new_fs, i);
input.inode_table = ext2fs_inode_table_loc(new_fs, i);
input.blocks_count = ext2fs_group_blocks_count(new_fs, i);
input.reserved_blocks = (blk_t) (percent * input.blocks_count
/ 100.0);
#if 0
printf("new block bitmap is at 0x%04x\n", input.block_bitmap);
printf("new inode bitmap is at 0x%04x\n", input.inode_bitmap);
printf("new inode table is at 0x%04x-0x%04x\n",
input.inode_table,
input.inode_table + new_fs->inode_blocks_per_group-1);
printf("new group has %u blocks\n", input.blocks_count);
printf("new group will reserve %d blocks\n",
input.reserved_blocks);
printf("new group has %d free blocks\n",
ext2fs_bg_free_blocks_count(new_fs, i),
printf("new group has %d free inodes (%d blocks)\n",
ext2fs_bg_free_inodes_count(new_fs, i),
new_fs->inode_blocks_per_group);
printf("Adding group #%d\n", input.group);
#endif
if (use_old_ioctl &&
ioctl(fd, EXT2_IOC_GROUP_ADD, &input) == 0)
continue;
else
use_old_ioctl = 0;
input64.group = input.group;
input64.block_bitmap = input.block_bitmap;
input64.inode_bitmap = input.inode_bitmap;
input64.inode_table = input.inode_table;
input64.blocks_count = input.blocks_count;
input64.reserved_blocks = input.reserved_blocks;
input64.unused = input.unused;
if (ioctl(fd, EXT4_IOC_GROUP_ADD, &input64) < 0) {
com_err(program_name, errno,
_("While trying to add group #%d"),
input.group);
exit(1);
}
}
ext2fs_free(new_fs);
close(fd);
return 0;
#else
printf(_("Filesystem at %s is mounted on %s, and on-line resizing is "
"not supported on this system.\n"), fs->device_name, mtpt);
exit(1);
#endif
}
