Exemplo n.º 1
0
void cdc_rx_notify(uint8_t port) {
  l("cdc_rx_notify [%d]", port);

  uint8_t b = udi_cdc_getc();
  if (b != 0x08) {
    l("Protocol desync");
  }
  l("First byte ok");
  uint32_t offset = 0;
  do {
    buffer[offset++] = b;
    b = udi_cdc_getc();
    l("-> 0x%02x", b);
  } while (b & 0x80);
  buffer[offset++] = b;
  // Now we have enough to know the size
  l("Length read, decoding...");
  l("... 0x%02x 0x%02x", buffer[0], buffer[1]);

  pb_istream_t istream = pb_istream_from_buffer(buffer + 1, USB_BUFFER_SIZE);
  l("istream bytes_left before %d", istream.bytes_left);
  uint64_t len = 0;
  pb_decode_varint(&istream, &len);
  l("message_length %d", (uint32_t)len);
  l("offset %d", offset);
  udi_cdc_read_buf(buffer + offset, len);
  l("decode message");
  istream = pb_istream_from_buffer(buffer + offset, len);
  DonglePiRequest request = {0};
  request.config.i2c.funcs.decode = handle_i2c_config_cb;
  request.config.uart.funcs.decode = handle_uart_config_cb;
  request.config.spi.funcs.decode = handle_spi_config_cb;
  request.config.gpio.pins.funcs.decode = handle_gpio_pin_config_cb;
  request.data.i2c.writes.funcs.decode = handle_i2c_write_cb;

  if (!pb_decode(&istream, DonglePiRequest_fields, &request)) {
    l("failed to decode the packet, wait for more data");
    return;
  }

  l("Request #%d received", request.message_nb);

  if (request.has_data && request.data.has_gpio) {
    handle_gpio_write(request.data.gpio);
  }

  pb_ostream_t ostream = pb_ostream_from_buffer(buffer, USB_BUFFER_SIZE);
  DonglePiResponse response = {};
  response.message_nb = request.message_nb;
  l("Create response for #%d", response.message_nb);

  handle_gpio_read(&response);

  pb_encode_delimited(&ostream, DonglePiResponse_fields, &response);
  l("Write response nb_bytes = %d", ostream.bytes_written);
  uint32_t wrote = udi_cdc_write_buf(buffer, ostream.bytes_written);
  l("Done. wrote %d bytes", wrote);
}
Exemplo n.º 2
0
int main(int argc, char** argv) {
	if (argc != 2) {fprintf(stderr, "%s our_sk", argv[0]); return 1;}
    unsigned char sk[crypto_box_SECRETKEYBYTES];
    {
        FILE* f = fopen(argv[1], "r");
        if (f == NULL) {fprintf(stderr, "Cannot open our secret key file"); return 1;}
        int len = fread(sk, 1, crypto_box_SECRETKEYBYTES, f);
        fclose(f);
        if (len != crypto_box_SECRETKEYBYTES) {fprintf(stderr, "Bad secret key file"); return 1;}
    }

    uint8_t buf[1<<16];
    int len = fread(buf, 1, 1<<16, stdin);
    pb_istream_t stream = pb_istream_from_buffer(buf, len);
    Box box;
    if (!pb_decode(&stream, Box_fields, &box)) return 1;
    if (box.enc_algo != 1) return 1;

    uint8_t n[crypto_box_NONCEBYTES];
    for (int i=0; i<crypto_box_NONCEBYTES; ++i) n[i] = box.data.bytes[i];
    for (int i=0; i<crypto_box_BOXZEROBYTES; ++i) box.data.bytes[i] = 0;

    stream = pb_istream_from_buffer(box.sender.bytes, box.sender.size);
    PublicKey pk;
    if (!pb_decode(&stream, PublicKey_fields, &pk)) return 1;
    PublicKeyData pkd;
    stream = pb_istream_from_buffer(pk.publickey_msg.bytes,
            pk.publickey_msg.size);
    if (!pb_decode(&stream, PublicKeyData_fields, &pkd)) return 1;
    int decrypted = 0;
    for (int i=0; i<min(pkd.enc_keys_count,pkd.enc_algos_count); i++) {
        if (pkd.enc_keys[i].size == crypto_box_PUBLICKEYBYTES
                && pkd.sig_algos[i] == 1) {
            uint8_t* encpk = &pkd.enc_keys[i].bytes[0];
            if (crypto_box_open(buf,box.data.bytes+8,box.data.size-8,n,encpk,sk)
                 == 0) {
                decrypted = 1;
                break;
            }
        }
    }
    for (int i=0; i<crypto_box_SECRETKEYBYTES; i++) sk[i] = 0;


    if (decrypted) {
        int got = fwrite(buf+crypto_box_ZEROBYTES, 1, box.data.size-8-crypto_box_ZEROBYTES, stdout);
        assert(got == box.data.size-8-crypto_box_ZEROBYTES);
        got = fwrite(box.sender.bytes, 1, box.sender.size, stderr);
        assert(got == box.sender.size);
    }

    return !decrypted;
}
Exemplo n.º 3
0
int main(int argc, char **argv)
{
    uint8_t buffer[1024];
    size_t count;
    pb_istream_t stream;

    /* Whether to expect the optional values or the default values. */
    int mode = (argc > 1) ? atoi(argv[1]) : 0;

    /* Read the data into buffer */
    SET_BINARY_MODE(stdin);
    count = fread(buffer, 1, sizeof(buffer), stdin);

    /* Construct a pb_istream_t for reading from the buffer */
    stream = pb_istream_from_buffer(buffer, count);

    /* Decode and print out the stuff */
    if (!check_alltypes(&stream, mode))
    {
        printf("Parsing failed: %s\n", PB_GET_ERROR(&stream));
        return 1;
    } else {
        return 0;
    }
}
Exemplo n.º 4
0
// Validate the contents of a Resource proto. `id` is the intended resource id.
static bool validate_resource_pb(const uint8_t *resource_pb,
                                 size_t resource_pb_size, size_t id) {
  GPR_ASSERT(id < n_resources);
  if (resource_pb == NULL) {
    return false;
  }
  google_census_Resource vresource;
  vresource.name.funcs.decode = &validate_string;
  vresource.name.arg = resources[id];
  vresource.description.funcs.decode = &validate_string;
  vresource.description.arg = resources[id];
  vresource.unit.numerator.funcs.decode = &validate_units;
  vresource.unit.numerator.arg = resources[id];
  vresource.unit.denominator.funcs.decode = &validate_units;
  vresource.unit.denominator.arg = resources[id];

  pb_istream_t stream =
      pb_istream_from_buffer((uint8_t *)resource_pb, resource_pb_size);
  if (!pb_decode(&stream, google_census_Resource_fields, &vresource)) {
    return false;
  }
  // A Resource must have a name, a unit, with at least one numerator.
  return (resources[id]->name != NULL && vresource.has_unit &&
          resources[id]->n_numerators > 0);
}
Exemplo n.º 5
0
bool decode_trace_context(google_trace_TraceContext *ctxt, uint8_t *buffer,
                          const size_t nbytes) {
  // Create a stream that reads nbytes from the buffer.
  pb_istream_t stream = pb_istream_from_buffer(buffer, nbytes);

  // decode message
  bool status = pb_decode(&stream, google_trace_TraceContext_fields, ctxt);

  if (!status) {
    gpr_log(GPR_DEBUG, "TraceContext decoding failed: %s",
            PB_GET_ERROR(&stream));
    return false;
  }

  // check fields
  if (!ctxt->has_trace_id) {
    gpr_log(GPR_DEBUG, "Invalid TraceContext: missing trace_id");
    return false;
  }
  if (!ctxt->has_span_id) {
    gpr_log(GPR_DEBUG, "Invalid TraceContext: missing span_id");
    return false;
  }

  return true;
}
Exemplo n.º 6
0
void ennoSystemMessageHandler(char* topic, char* payload, int length) {
    Device_Header header;

    pb_istream_t stream = pb_istream_from_buffer(payload, length);

    if (pb_decode_delimited(&stream, Device_Header_fields, &header)) {

        if (header.command == Device_Command_REGISTER_ACK) {
            Device_RegistrationAck ack;
            if (pb_decode_delimited(&stream, Device_RegistrationAck_fields, &ack)) {
                if (ack.state == Device_RegistrationAckState_NEW_REGISTRATION) {
                    printf("Registered new device.\n");
                    registered = true;
                }
                else if (ack.state == Device_RegistrationAckState_ALREADY_REGISTERED) {
                    printf("Device has already registered.\n");
                }
                else if (ack.state == Device_RegistrationAckState_REGISTRATION_ERROR) {
                    printf("Error rigistering device.\n");
                }
            }
        }
    } else {
        printf("Unable to decode system command.\n");
    }
}
Exemplo n.º 7
0
int main(int argc, char **argv)
{
    uint8_t buffer[AnonymousOneOfMessage_size];
    size_t count;
    int option;

    if (argc != 2)
    {
        fprintf(stderr, "Usage: decode_oneof [number]\n");
        return 1;
    }
    option = atoi(argv[1]);

    SET_BINARY_MODE(stdin);
    count = fread(buffer, 1, sizeof(buffer), stdin);

    if (!feof(stdin))
    {
        printf("Message does not fit in buffer\n");
        return 1;
    }

    {
        int status = 0;
        pb_istream_t stream;

        stream = pb_istream_from_buffer(buffer, count);
        status = test_oneof_1(&stream, option);

        if (status != 0)
            return status;
    }

    return 0;
}
/** Handle a system command */
void handleSystemCommand(byte* payload, unsigned int length) {
  Device_Header header;
  pb_istream_t stream = pb_istream_from_buffer(payload, length);
  
  // Read header to find what type of command follows.
  if (pb_decode_delimited(&stream, Device_Header_fields, &header)) {
    
    // Handle a registration acknowledgement.
    if (header.command == Device_Command_REGISTER_ACK) {
      Device_RegistrationAck ack;
      if (pb_decode_delimited(&stream, Device_RegistrationAck_fields, &ack)) {
        if (ack.state == Device_RegistrationAckState_NEW_REGISTRATION) {
          baseEvents_log("Registered new device.");
          registered = true;
        } else if (ack.state == Device_RegistrationAckState_ALREADY_REGISTERED) {
          baseEvents_log("Device was already registered.");
          registered = true;
        } else if (ack.state == Device_RegistrationAckState_REGISTRATION_ERROR) {
          baseEvents_log("Error registering device.");
        }
      }
    }
  } else {
    baseEvents_log("Unable to decode system command.");
  }
}
Exemplo n.º 9
0
int main()
{
    uint8_t buffer[Person_size];
    pb_istream_t stream;
    size_t count;
    
    /* Read the data into buffer */
    SET_BINARY_MODE(stdin);
    count = fread(buffer, 1, sizeof(buffer), stdin);
    
    if (!feof(stdin))
    {
    	printf("Message does not fit in buffer\n");
    	return 1;
    }
    
    /* Construct a pb_istream_t for reading from the buffer */
    stream = pb_istream_from_buffer(buffer, count);
    
    /* Decode and print out the stuff */
    if (!print_person(&stream))
    {
        printf("Parsing failed: %s\n", PB_GET_ERROR(&stream));
        return 1;
    } else {
        return 0;
    }
}
Exemplo n.º 10
0
bool NetDecode(
	ENetPacket *packet, void *dest, const pb_field_t *fields)
{
	pb_istream_t stream = pb_istream_from_buffer(
		packet->data + NET_MSG_SIZE, packet->dataLength - NET_MSG_SIZE);
	bool status = pb_decode(&stream, fields, dest);
	CASSERT(status, "Failed to decode pb");
	return status;
}
Exemplo n.º 11
0
void msg_process(char type, uint16_t msg_id, const pb_field_t *fields, uint8_t *msg_raw, uint32_t msg_size)
{
	static uint8_t msg_data[MSG_IN_SIZE];
	pb_istream_t stream = pb_istream_from_buffer(msg_raw, msg_size);
	bool status = pb_decode(&stream, fields, msg_data);
	if (status) {
		MessageProcessFunc(type, 'i', msg_id, msg_data);
	} else {
		fsm_sendFailure(FailureType_Failure_SyntaxError, stream.errmsg);
	}
}
Exemplo n.º 12
0
std::shared_ptr<Graph> ImportIRGraph(const std::string& serialized_graph,
                                     std::vector<at::Tensor>& initializers) {

  pb_istream_t istream = pb_istream_from_buffer(reinterpret_cast<const pb_byte_t *>(serialized_graph.data()), serialized_graph.size());

  auto model = Reader<Model_>::read(&istream);

  auto graph = buildGraph(model.graph, initializers);

  return graph;
}
Exemplo n.º 13
0
void msg_read_tiny(uint8_t *buf, int len)
{
	if (len != 64) return;
	if (buf[0] != '?' || buf[1] != '#' || buf[2] != '#') {
		return;
	}
	uint16_t msg_id = (buf[3] << 8) + buf[4];
	uint32_t msg_size = (buf[5] << 24) + (buf[6] << 16) + (buf[7] << 8) + buf[8];
	if (msg_size > 64 || len - msg_size < 9) {
		return;
	}

	const pb_field_t *fields = 0;
	pb_istream_t stream = pb_istream_from_buffer(buf + 9, msg_size);

	switch (msg_id) {
		case MessageType_MessageType_PinMatrixAck:
			fields = PinMatrixAck_fields;
			break;
		case MessageType_MessageType_ButtonAck:
			fields = ButtonAck_fields;
			break;
		case MessageType_MessageType_PassphraseAck:
			fields = PassphraseAck_fields;
			break;
		case MessageType_MessageType_Cancel:
			fields = Cancel_fields;
			break;
		case MessageType_MessageType_Initialize:
			fields = Initialize_fields;
			break;
#if DEBUG_LINK
		case MessageType_MessageType_DebugLinkDecision:
			fields = DebugLinkDecision_fields;
			break;
		case MessageType_MessageType_DebugLinkGetState:
			fields = DebugLinkGetState_fields;
			break;
#endif
	}
	if (fields) {
		bool status = pb_decode(&stream, fields, msg_tiny);
		if (status) {
			msg_tiny_id = msg_id;
		} else {
			fsm_sendFailure(FailureType_Failure_SyntaxError, stream.errmsg);
			msg_tiny_id = 0xFFFF;
		}
	} else {
		fsm_sendFailure(FailureType_Failure_UnexpectedMessage, "Unknown message");
		msg_tiny_id = 0xFFFF;
	}
}
Exemplo n.º 14
0
int main(int argc, char** argv) {
    int human = argc == 2 && argv[1][0] == '-' && argv[1][1] == 'h';
    uint8_t buffer[256];
    int len = fread(buffer, 1, sizeof(buffer), stdin);
    pb_istream_t stream = pb_istream_from_buffer(buffer, len);
    PublicKey pk;
    if (!pb_decode(&stream, PublicKey_fields, &pk)) return 1;
    PublicKeyData pkd;
    stream = pb_istream_from_buffer(pk.publickey_msg.bytes,
            pk.publickey_msg.size);
    if (!pb_decode(&stream, PublicKeyData_fields, &pkd)) return 1;
    for (int i=0; i<pkd.sig_keys_count; i++) {
        if (  pk.sigs_count < i
           || pk.sigs[i].size < crypto_sign_BYTES
           || pkd.sig_keys[i].size < crypto_sign_PUBLICKEYBYTES
           || crypto_sign_detach_open(pk.publickey_msg.bytes,
               pk.publickey_msg.size, pk.sigs[i].bytes, pkd.sig_keys[i].bytes)
           != 0) {
            fprintf(stderr, "Invalid key\n");
            return 2;
        } else {
            initialise(1344, 256, 128);
            char* dgst = digest((char*)pkd.sig_keys[i].bytes,
                    pkd.sig_keys[i].size, 1);
            for (int i=0; i<128/8; i+=2) {
                if (i > 0 && human) {
                    fprintf(stdout, " ");
                    if (i == 8) fprintf(stdout, " ");
                }
                fprintf(stdout, "%X", (dgst[i]&0xF0)>>4);
                fprintf(stdout, "%X", dgst[i]&0x0F);
                fprintf(stdout, "%X", (dgst[i+1]&0xF0)>>4);
                fprintf(stdout, "%X", dgst[i+1]&0x0F);
            }
            if (human) printf("\n");
            else return 1;
            dispose();
        }
    }
}
static bool checkreturn decode_callback_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iterator_t *iter)
{
    pb_callback_t *pCallback = (pb_callback_t*)iter->pData;
    
#ifdef PB_OLD_CALLBACK_STYLE
    void *arg = pCallback->arg;
#else
    void **arg = &(pCallback->arg);
#endif
    
    if (pCallback->funcs.decode == NULL)
        return pb_skip_field(stream, wire_type);
    
    if (wire_type == PB_WT_STRING)
    {
        pb_istream_t substream;
        
        if (!pb_make_string_substream(stream, &substream))
            return false;
        
        do
        {
            if (!pCallback->funcs.decode(&substream, iter->pos, arg))
                PB_RETURN_ERROR(stream, "callback failed");
        } while (substream.bytes_left);
        
        pb_close_string_substream(stream, &substream);
        return true;
    }
    else
    {
        /* Copy the single scalar value to stack.
         * This is required so that we can limit the stream length,
         * which in turn allows to use same callback for packed and
         * not-packed fields. */
        pb_istream_t substream;
        uint8_t buffer[10];
        size_t size = sizeof(buffer);
        
        if (!read_raw_value(stream, wire_type, buffer, &size))
            return false;
        substream = pb_istream_from_buffer(buffer, size);
        
        return pCallback->funcs.decode(&substream, iter->pos, arg);
    }
}
/** Handle a command specific to the specification for this device */
void handleSpecificationCommand(byte* payload, unsigned int length) {
  ArduinoCustom__Header header;
  
  memset(buffer,0,300);
  ArduinoCustom_testData testEvents;
  
  pb_istream_t stream = pb_istream_from_buffer(payload, length);
  if (pb_decode_delimited(&stream, ArduinoCustom__Header_fields, &header)) {
    baseEvents_log("Decoded header for custom command.");
    if (header.command == ArduinoCustom_Command_RGB_LED) {
      if (pb_decode_delimited(&stream, ArduinoCustom_RGB_fields, &RGB_LED)) {
        baseEvents_log("Command: RGB_LED set(h=%d, s=%d, b=%d)", 
                       RGB_LED.rgbled_h, RGB_LED.rgbled_s, RGB_LED.rgbled_b);
        hsb2rgb_led_open(RGB_LED.rgbled_h, RGB_LED.rgbled_s, RGB_LED.rgbled_b);
      }
    }
    else if (header.command == ArduinoCustom_Command_DC_MOTOR) {
      ArduinoCustom_DC_MOTOR dc_motor;
      if (pb_decode_delimited(&stream, ArduinoCustom__Header_fields, &dc_motor)) {
        baseEvents_log("Command: DC_MOTOR set: %d", dc_motor.motor_sw);
        dc_motor_set(dc_motor.motor_sw);
      }
    }
    else if (header.command == ArduinoCustom_Command_PING) {
      ArduinoCustom_ping ping;
      if (pb_decode_delimited(&stream, ArduinoCustom_ping_fields, &ping)) {
        handlePing(ping, header.originator);
      }
    } 
    else if (header.command == ArduinoCustom_Command_TESTEVENTS) {
      if (pb_decode_delimited(&stream, ArduinoCustom_testEvents_fields, &testEvents)) {
         handleTestEvents(testEvents, header.originator);
      }
    } 
    else if (header.command == ArduinoCustom_Command_SERIALPRINTLN) {
      ArduinoCustom_serialPrintln serialPrintln;
      if (pb_decode_delimited(&stream, ArduinoCustom_serialPrintln_fields, &serialPrintln)) {
        handleSerialPrintln(serialPrintln,header.originator);
      }
    }
    else {
      baseEvents_log("Unknown command.");
    }
  }
}
Exemplo n.º 17
0
/**
 * Message SSMsg decode function
 * @param buffer
 * @param buf_len
 * @param ssmsg
 * @return
 */
int ss_pb_decode(uint8_t *buffer,int buf_len,SSMsg *ssmsg)
{
	bool status;

	pb_istream_t stream = pb_istream_from_buffer(buffer, buf_len);
	//ssmsg->devlist.funcs.decode=&ss_decode_devlist;

	log_printf(LOG_VERBOSE,"SSMsg Decoding! \n");
	status=pb_decode(&stream, SSMsg_fields, ssmsg);

	if (!status)
	{
	       log_printf(LOG_ERROR,"Decoding failed: %s\n", PB_GET_ERROR(&stream));
	       return -1;
	}

	return 1;
}
grpc_grpclb_initial_response *grpc_grpclb_initial_response_parse(
    grpc_slice encoded_grpc_grpclb_response) {
  pb_istream_t stream =
      pb_istream_from_buffer(GRPC_SLICE_START_PTR(encoded_grpc_grpclb_response),
                             GRPC_SLICE_LENGTH(encoded_grpc_grpclb_response));
  grpc_grpclb_response res;
  memset(&res, 0, sizeof(grpc_grpclb_response));
  if (!pb_decode(&stream, grpc_lb_v1_LoadBalanceResponse_fields, &res)) {
    gpr_log(GPR_ERROR, "nanopb error: %s", PB_GET_ERROR(&stream));
    return NULL;
  }
  grpc_grpclb_initial_response *initial_res =
      gpr_malloc(sizeof(grpc_grpclb_initial_response));
  memcpy(initial_res, &res.initial_response,
         sizeof(grpc_grpclb_initial_response));

  return initial_res;
}
Exemplo n.º 19
0
void process_ZB_RX_RESPONSE()
{
  uint8_t* data = mrf.get_rxinfo()->rx_data;
  uint8_t const length = mrf.rx_datalength();

  DEBUG_PRINTLN2("process_ZB_RX_RESPONSE length = ", length);
  for (int i =0;i < length; ++i)
  {
    Serial.print(data[i], HEX);
    Serial.print(' ');
  }
  DEBUG_PRINTLN(' ');

  send_dst_addr = mrf.get_rxinfo()->src_addr16;

  pb_istream_t istream = pb_istream_from_buffer(data, length);

  process_incoming_packet(&istream);
}
Exemplo n.º 20
0
int main()
{
    TestResults results = {};
    AllTypes message = {};

    pb_istream_t istream = pb_istream_from_buffer((uint8_t*)input_data, sizeof(input_data));
    results.success = pb_decode(&istream, AllTypes_fields, &message);
    results.success &= (message.end == 1099);

    results.has_stack_usage = true;
    results.stack_usage = platform_stack_usage();

    uint8_t buf[16];
    pb_ostream_t ostream = pb_ostream_from_buffer(buf, sizeof(buf));
    pb_encode(&ostream, TestResults_fields, &results);
    platform_write(buf, ostream.bytes_written);
    
    return 0;
}
Exemplo n.º 21
0
void messageRxTask(void *pvParameters) {

	BufferCntType bytesRead;

	for (;;) {
		bytesRead = usbReceiveFrame(gRxFrameBuffer, FRAME_BUFFER_MAX_LEN);
		if (bytesRead > 0) {
			pb_istream_t stream = pb_istream_from_buffer(gRxFrameBuffer, bytesRead);

			const pb_field_t *type = decodeMotorMsgType(&stream);
			if (type == MotorMsg_Data_fields) {
				processDataMsg(&stream);
			} else if (type == MotorMsg_Cmd_fields) {
				processCmdMsg(&stream);
			}
		}
		// Wait 10ms before we run another.
		vTaskDelay(10 / portTICK_PERIOD_MS);
	}
}
Exemplo n.º 22
0
static void update_pbring(void *arg, long l)
{
    pbring_inst_t *p = (pbring_inst_t *) arg;

    ring_size_t cmdsize = record_next_size(&p->to_rt_rb);
    if (cmdsize < 0) {
        // command ring empty
        *(p->underrun) += 1;
        return;
    }
    const void *cmdbuffer = record_next(&p->to_rt_rb);
    pb_istream_t stream = pb_istream_from_buffer((void *) cmdbuffer, cmdsize);
    int retval;

    if (!decode_msg(p, &stream)) {

        // process command here
        // prepare reply
        tx.has_motstat = true;
        tx.type =  pb_ContainerType_MT_MOTSTATUS;
        tx.note.funcs.encode = npb_encode_string;
        tx.note.arg = "hi there!";

        tx.motstat = (pb_MotionStatus) {
            .commandEcho = rx.motcmd.command,
             .commandNumEcho = rx.motcmd.commandNum,
              .commandStatus = pb_cmd_status_t_EMCMOT_COMMAND_OK,
               .has_carte_pos_fb = true,
            .carte_pos_fb = {
                .tran = {
                    .has_x = true,
                    .x = 42.0,
                    .has_y = true,
                    .y = 13.56,
                    .has_z = true,
                    .z = 27.12
                },
                .has_a = true,
                .a = 3.14
            }
        };
grpc_grpclb_serverlist *grpc_grpclb_response_parse_serverlist(
    grpc_slice encoded_grpc_grpclb_response) {
  bool status;
  decode_serverlist_arg arg;
  pb_istream_t stream =
      pb_istream_from_buffer(GRPC_SLICE_START_PTR(encoded_grpc_grpclb_response),
                             GRPC_SLICE_LENGTH(encoded_grpc_grpclb_response));
  pb_istream_t stream_at_start = stream;
  grpc_grpclb_response res;
  memset(&res, 0, sizeof(grpc_grpclb_response));
  memset(&arg, 0, sizeof(decode_serverlist_arg));

  res.server_list.servers.funcs.decode = decode_serverlist;
  res.server_list.servers.arg = &arg;
  arg.first_pass = true;
  status = pb_decode(&stream, grpc_lb_v1_LoadBalanceResponse_fields, &res);
  if (!status) {
    gpr_log(GPR_ERROR, "nanopb error: %s", PB_GET_ERROR(&stream));
    return NULL;
  }

  arg.first_pass = false;
  status =
      pb_decode(&stream_at_start, grpc_lb_v1_LoadBalanceResponse_fields, &res);
  if (!status) {
    gpr_log(GPR_ERROR, "nanopb error: %s", PB_GET_ERROR(&stream));
    return NULL;
  }

  grpc_grpclb_serverlist *sl = gpr_zalloc(sizeof(grpc_grpclb_serverlist));
  sl->num_servers = arg.num_servers;
  sl->servers = arg.servers;
  if (res.server_list.has_expiration_interval) {
    sl->expiration_interval = res.server_list.expiration_interval;
  }
  return sl;
}
Exemplo n.º 24
0
void ennoCommandMessageHandler(char* topic, char* payload, int length){
    ArduinoCustom__Header header;
    pb_istream_t stream = pb_istream_from_buffer(payload, length);
    if (pb_decode_delimited(&stream, ArduinoCustom__Header_fields, &header)) {
        printf("Decoded header for custom command.\n");
        if (header.command == ArduinoCustom_Command_PING) {
            ArduinoCustom_ping ping;
            if (pb_decode_delimited(&stream, ArduinoCustom_ping_fields, &ping)) {
                handlePing(ping, header.originator);
            }
        } else if (header.command == ArduinoCustom_Command_TESTEVENTS) {
            ArduinoCustom_testEvents testEvents;
            if (pb_decode_delimited(&stream, ArduinoCustom_testEvents_fields, &testEvents)) {
                handleTestEvents(testEvents, header.originator);
            }
        } else if (header.command == ArduinoCustom_Command_SERIALPRINTLN) {
            ArduinoCustom_serialPrintln serialPrintln;
            if (pb_decode_delimited(&stream, ArduinoCustom_serialPrintln_fields, &serialPrintln)) {
                handleSerialPrintln(serialPrintln, header.originator);
            }
        }
    }

}
Exemplo n.º 25
0
void MotorController::recieveResponse()
{
  /* Read response from the server */
  size_t n;             // n is the response from socket: 0 means connection closed, otherwise n = num bytes read
  uint8_t buffer[256];  // buffer to read response into

  memset(buffer, 0, sizeof(buffer));
  /* read from the buffer */
  n = (*sock_).readMessage(buffer);  // blocks until data is read

  if (n == 0)
  {
    ROS_ERROR_STREAM("Connection closed by server");
    ros::shutdown();
  }

  /* Allocate space for the decoded message. */
  ResponseMessage response = ResponseMessage_init_zero;

  /* Create a stream that reads from the buffer. */
  pb_istream_t istream = pb_istream_from_buffer(buffer, n);

  /* decode the message. */
  bool status = pb_decode(&istream, ResponseMessage_fields, &response);

  /* check for any errors.. */
  if (!status)
  {
    ROS_ERROR_STREAM("Decoding Failed: " << PB_GET_ERROR(&istream));
    ros::shutdown();
  }

  publishResponse(response);

  ROS_INFO_STREAM_THROTTLE(log_period_, "Rate: " << 1 / response.dt_sec << "hz.");
}
Exemplo n.º 26
0
// thread function, per-instance
// interpolates all joints of this instance
static int update(void *arg, const hal_funct_args_t *fa)
{
    struct inst_data *ip = (struct inst_data *) arg;
    double period = ((double) fa_period(fa)) * 1e-9;

    int i;
    if (segment_completed(ip, period)) {
		// check for a new JointTrajectoryPoint
		void *data;
		ringsize_t size;
		if (record_read(&ip->traj, (const void**)&data, &size) == 0) {

		    // protobuf-decode it
		    pb_istream_t stream = pb_istream_from_buffer(data, size);
		    pb_JointTrajectoryPoint rx =  pb_JointTrajectoryPoint_init_zero;
		    if (!pb_decode(&stream, pb_JointTrajectoryPoint_fields, &rx)) {
				rtapi_print_msg(RTAPI_MSG_ERR, "%s: pb_decode(JointTrajectoryPoint) failed: '%s'",
					compname, PB_GET_ERROR(&stream));
		    } else {
			// decode ok - start a new segment
				double duration = *(ip->duration) = rx.time_from_start - ip->time_from_start;
	            // the very first point in the ringbuffer is not a segment.
	            // therefore we need to "jump" to these initial settings for the
	            // interpolator to calculate the correct path.
	            // for example, a path can start at position, velocity and acceleration
	            // who are non-zero. In a typical ROS message the first point has a
	            // duration of "0.0"
	            if (duration == 0.0) {
	                // set the start positions
	                // or try out to drop this point later on
	                for (i = 0; i < ip->count; i++) {
	                    struct joint *jp = &ip->joints[i];
						*(jp->traj_busy) = true;
	                    *(jp->curr_pos) = *(jp->end_pos) = rx.positions[i];
	                    *(jp->curr_vel) = *(jp->end_vel) = rx.velocities[i];
	                    *(jp->curr_acc) = *(jp->end_acc) = rx.accelerations[i];
	                    jp->coeff[0] = *(jp->end_pos);
	                    jp->coeff[1] = 0.0;
	                    jp->coeff[2] = 0.0;
	                    jp->coeff[3] = 0.0;
	                    jp->coeff[4] = 0.0;
	                    jp->coeff[5] = 0.0;
	                }
	                // so when we have read the first point, we need to discard everythin
	                // else and make sure we will read the second point, as to complete the
	                // first segment
	            } else {
				    generatePowers(*(ip->degree), duration, ip->powers);
	                ip->time_from_start =  rx.time_from_start;
	                *(ip->progress) = 0.0;
	                for (i = 0; i < rx.positions_count; i++) {
			            struct joint *jp = &ip->joints[i];
						*(jp->traj_busy) = true;
			            double pos2 = *(jp->end_pos) = rx.positions[i];
			    		double vel2 = *(jp->end_vel) = rx.velocities[i];
			    		double acc2 = *(jp->end_acc) = rx.accelerations[i];
	                    double pos1 = *(jp->curr_pos);
	                    double vel1 = *(jp->curr_vel);
	                    double acc1 = *(jp->curr_acc);
					    switch (*(ip->degree)) {
					    case 1:
							jp->coeff[0] = pos1;
							jp->coeff[1] = (pos2 - pos1) / duration;
							jp->coeff[2] = 0.0;
							jp->coeff[3] = 0.0;
							jp->coeff[4] = 0.0;
							jp->coeff[5] = 0.0;
						break;
					    case 3:
							jp->coeff[0] = pos1;
							jp->coeff[1] = vel1;
							jp->coeff[2] = (-3.0*pos1 + 3.0*pos2 - 2.0*vel1*ip->powers[1] - vel2*ip->powers[1]) / ip->powers[2];
							jp->coeff[3] = (2.0*pos1 - 2.0*pos2 + vel1*ip->powers[1] + vel2*ip->powers[1]) / ip->powers[3];
							jp->coeff[4] = 0.0;
							jp->coeff[5] = 0.0;
						break;
					    case 5:
							jp->coeff[0] = pos1;
							jp->coeff[1] = vel1;
							jp->coeff[2] = 0.5 * acc1;
							jp->coeff[3] =  (-20.0*pos1 + 20.0*pos2 - 3.0*acc1*ip->powers[2] + acc2*ip->powers[2] -
									 12.0*vel1*ip->powers[1] - 8.0*vel2*ip->powers[1]) / (2.0*ip->powers[3]);
							jp->coeff[4] =  (30.0*pos1 - 30.0*pos2 + 3.0*acc1*ip->powers[2] - 2.0*acc2*ip->powers[2] +
									 16.0*vel1*ip->powers[1] + 14.0*vel2*ip->powers[1]) / (2.0*ip->powers[4]);
							jp->coeff[5] =  (-12.0*pos1 + 12.0*pos2 - acc1*ip->powers[2] + acc2*ip->powers[2] -
									 6.0*vel1*ip->powers[1] - 6.0*vel2*ip->powers[1]) / (2.0*ip->powers[5]);
						break;
					    }
					}
	        	}
		    }
		    record_shift(&ip->traj);   // consume record
		} else {
	        // segment completed and no new point in ringbuffer
	        for (i = 0; i < ip->count; i++) {
	            struct joint *jp = &ip->joints[i];
				*(jp->traj_busy) = false;
	            jp->coeff[0] = *(jp->end_pos);
	            jp->coeff[1] = 0.0;
	            jp->coeff[2] = 0.0;
	            jp->coeff[3] = 0.0;
	            jp->coeff[4] = 0.0;
	            jp->coeff[5] = 0.0;
	        }
	    }
    }

    *(ip->progress) += period;

    generatePowers(*(ip->degree), *(ip->progress), ip->pnow);
    for (i = 0; i < ip->count; i++) {
		struct joint *jp = &ip->joints[i];
		interpolate_joint(ip, jp, *(ip->progress), 0);
    }
    return 0;
}
Exemplo n.º 27
0
static ssize_t sacd_net_input_read(sacd_input_t dev, int pos, int blocks, void *buffer)
{
    if (!dev)
    {
        return 0;
    }
    else
    {
        uint8_t output_buf[16];
        ServerRequest request;
        ServerResponse response;
        pb_ostream_t output = pb_ostream_from_buffer(output_buf, sizeof(output_buf));
        pb_istream_t input = pb_istream_from_socket(&dev->fd);
        uint8_t zero = 0;

        request.type = ServerRequest_Type_DISC_READ;
        request.sector_offset = pos;
        request.sector_count = blocks;

        if (!pb_encode(&output, ServerRequest_fields, &request))
        {
            return 0;
        }

        /* We signal the end of request with a 0 tag. */
        pb_write(&output, &zero, 1);

        // write the output buffer to the opened socket
        {
            bool ret;
            size_t written; 
            ret = (socket_send(&dev->fd, (char *) output_buf, output.bytes_written, &written, 0, 0) == IO_DONE && written == output.bytes_written); 

            if (!ret)
                return 0;
        }

#if 0
        response.data.bytes = buffer;
        {
            size_t got; 
            uint8_t *buf_ptr = dev->input_buffer;
            size_t buf_left = blocks * SACD_LSN_SIZE + 16;

            input = pb_istream_from_buffer(dev->input_buffer, MAX_PROCESSING_BLOCK_SIZE * SACD_LSN_SIZE + 1024);

            if (socket_recv(&dev->fd, (char *) buf_ptr, buf_left, &got, MSG_PARTIAL, 0) != IO_DONE)
                return 0;

            while(got > 0 && !pb_decode(&input, ServerResponse_fields, &response))
            {
                buf_ptr += got;
                buf_left -= got;

                if (socket_recv(&dev->fd, (char *) buf_ptr, buf_left, &got, MSG_PARTIAL, 0) != IO_DONE)
                    return 0;

                input = pb_istream_from_buffer(dev->input_buffer, MAX_PROCESSING_BLOCK_SIZE * SACD_LSN_SIZE + 1024);
            }
        }
#else
        response.data.bytes = buffer;
        if (!pb_decode(&input, ServerResponse_fields, &response))
        {
            return 0;
        }
#endif
        if (response.type != ServerResponse_Type_DISC_READ)
        {
            return 0;
        }

        if (response.has_data)
        {
            return response.result;
        }
    }

    return 0;
}
Exemplo n.º 28
0
void MotorController::setPID()
{
  ros::Rate rate(frequency_);
  ROS_INFO_STREAM("Setting PID Values:"
                  << "\n\t P => L: " << p_l_ << " R: " << p_r_ << "\n\t D => L: " << d_l_ << " R: " << d_r_
                  << "\n\t I => L: " << i_l_ << " R: " << i_r_ << "\n\t Kv => L: " << kv_l_ << " R: " << kv_r_);

  bool valid_values = false;  // pid values have been set correctly

  /* This is the buffer where we will store the request message. */
  uint8_t requestbuffer[256];
  size_t message_length;
  bool status;

  /* allocate space for the request message to the server */
  RequestMessage request = RequestMessage_init_zero;

  /* Create a stream that will write to our buffer. */
  pb_ostream_t ostream = pb_ostream_from_buffer(requestbuffer, sizeof(requestbuffer));

  /* indicate that pid fields will contain values */
  request.has_p_l = true;
  request.has_p_r = true;
  request.has_i_l = true;
  request.has_i_r = true;
  request.has_d_l = true;
  request.has_d_r = true;
  request.has_kv_l = true;
  request.has_kv_r = true;

  /* fill in the message fields */
  request.p_l = static_cast<float>(p_l_);
  request.p_r = static_cast<float>(p_r_);
  request.i_l = static_cast<float>(i_l_);
  request.i_r = static_cast<float>(i_r_);
  request.d_l = static_cast<float>(d_l_);
  request.d_r = static_cast<float>(d_r_);
  request.kv_l = static_cast<float>(kv_l_);
  request.kv_r = static_cast<float>(kv_r_);

  /* encode the protobuffer */
  status = pb_encode(&ostream, RequestMessage_fields, &request);
  message_length = ostream.bytes_written;

  /* check for any errors.. */
  if (!status)
  {
    ROS_ERROR_STREAM("Encoding failed: " << PB_GET_ERROR(&ostream));
    ros::shutdown();
  }

  size_t n;             // n is the response from socket: 0 means connection closed, otherwise n = num bytes read
  uint8_t buffer[256];  // buffer to read response into
  // unsigned char responsebuffer[256];

  /* Send PID values via ethernet and recieve response to ensure proper setting */
  while (ros::ok() && !valid_values)
  {
    (*sock_).sendMessage(reinterpret_cast<char*>(requestbuffer), message_length);

    memset(buffer, 0, sizeof(buffer));
    n = (*sock_).readMessage(buffer);  // blocks until data is read
    // memcpy(responsebuffer, buffer, sizeof(responsebuffer));

    if (n == 0)
    {
      ROS_ERROR_STREAM("Connection closed by server");
      ros::shutdown();
    }

    /* Allocate space for the decoded message. */
    ResponseMessage response = ResponseMessage_init_zero;

    /* Create a stream that reads from the buffer. */
    pb_istream_t istream = pb_istream_from_buffer(buffer, n);

    /* decode the message. */
    status = pb_decode(&istream, ResponseMessage_fields, &response);

    /* check for any errors.. */
    if (!status)
    {
      ROS_ERROR_STREAM("Decoding Failed: " << PB_GET_ERROR(&istream));
      ros::shutdown();
    }

    valid_values = (response.p_l == static_cast<float>(p_l_)) && (response.p_r == static_cast<float>(p_r_)) &&
                   (response.i_l == static_cast<float>(i_l_)) && (response.i_r == static_cast<float>(i_r_)) &&
                   (response.d_l == static_cast<float>(d_l_)) && (response.d_r == static_cast<float>(d_r_)) &&
                   (response.kv_l == static_cast<float>(kv_l_)) && (response.kv_r == static_cast<float>(kv_r_));

    rate.sleep();
  }
  ROS_INFO_ONCE("Sucessfully set all PID values");
}
Exemplo n.º 29
0
/* Basic fields, nested submessages, extensions */
static bool test_TestMessage()
{
    uint8_t buffer[256];
    size_t msgsize;
    
    /* Construct a message with various fields filled in */
    {
        TestMessage msg = TestMessage_init_zero;
        pb_ostream_t stream;

        fill_TestMessage(&msg);
        
        stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
        if (!pb_encode(&stream, TestMessage_fields, &msg))
        {
            fprintf(stderr, "Encode failed: %s\n", PB_GET_ERROR(&stream));
            return false;
        }
        msgsize = stream.bytes_written;
    }
    
    /* Output encoded message for debug */
    SET_BINARY_MODE(stdout);
    fwrite(buffer, 1, msgsize, stdout);
    
    /* Decode memory using dynamic allocation */
    {
        TestMessage msg = TestMessage_init_zero;
        pb_istream_t stream;
        SubMessage ext2_dest;

        msg.extensions = &ext1;
        ext1.type = &dynamic_ext;
        ext1.dest = NULL;
        ext1.next = &ext2;
        ext2.type = &static_ext;
        ext2.dest = &ext2_dest;
        ext2.next = NULL;
        
        stream = pb_istream_from_buffer(buffer, msgsize);
        if (!pb_decode(&stream, TestMessage_fields, &msg))
        {
            fprintf(stderr, "Decode failed: %s\n", PB_GET_ERROR(&stream));
            return false;
        }
        
        /* Make sure it encodes back to same data */
        {
            uint8_t buffer2[256];
            pb_ostream_t ostream = pb_ostream_from_buffer(buffer2, sizeof(buffer2));
            TEST(pb_encode(&ostream, TestMessage_fields, &msg));
            TEST(ostream.bytes_written == msgsize);
            TEST(memcmp(buffer, buffer2, msgsize) == 0);
        }
        
        /* Make sure that malloc counters work */
        TEST(get_alloc_count() > 0);
        
        /* Make sure that pb_release releases everything */
        pb_release(TestMessage_fields, &msg);
        TEST(get_alloc_count() == 0);
        
        /* Check that double-free is a no-op */
        pb_release(TestMessage_fields, &msg);
        TEST(get_alloc_count() == 0);
    }
    
    return true;
}
Exemplo n.º 30
0
static bool checkreturn decode_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iterator_t *iter)
{
    pb_decoder_t func = PB_DECODERS[PB_LTYPE(iter->current->type)];

    switch (PB_HTYPE(iter->current->type))
    {
    case PB_HTYPE_REQUIRED:
        return func(stream, iter->current, iter->pData);

    case PB_HTYPE_OPTIONAL:
        *(bool*)iter->pSize = true;
        return func(stream, iter->current, iter->pData);

    case PB_HTYPE_ARRAY:
        if (wire_type == PB_WT_STRING
                && PB_LTYPE(iter->current->type) <= PB_LTYPE_LAST_PACKABLE)
        {
            /* Packed array */
            bool status;
            size_t *size = (size_t*)iter->pSize;
            pb_istream_t substream;
            if (!pb_make_string_substream(stream, &substream))
                return false;

            while (substream.bytes_left && *size < iter->current->array_size)
            {
                void *pItem = (uint8_t*)iter->pData + iter->current->data_size * (*size);
                if (!func(&substream, iter->current, pItem))
                    return false;
                (*size)++;
            }
            status = (substream.bytes_left == 0);
            pb_close_string_substream(stream, &substream);
            return status;
        }
        else
        {
            /* Repeated field */
            size_t *size = (size_t*)iter->pSize;
            void *pItem = (uint8_t*)iter->pData + iter->current->data_size * (*size);
            if (*size >= iter->current->array_size)
                PB_RETURN_ERROR(stream, "array overflow");

            (*size)++;
            return func(stream, iter->current, pItem);
        }

    case PB_HTYPE_CALLBACK:
    {
        pb_callback_t *pCallback = (pb_callback_t*)iter->pData;

        if (pCallback->funcs.decode == NULL)
            return pb_skip_field(stream, wire_type);

        if (wire_type == PB_WT_STRING)
        {
            pb_istream_t substream;

            if (!pb_make_string_substream(stream, &substream))
                return false;

            while (substream.bytes_left)
            {
                if (!pCallback->funcs.decode(&substream, iter->current, pCallback->arg))
                    PB_RETURN_ERROR(stream, "callback failed");
            }

            pb_close_string_substream(stream, &substream);
            return true;
        }
        else
        {
            /* Copy the single scalar value to stack.
             * This is required so that we can limit the stream length,
             * which in turn allows to use same callback for packed and
             * not-packed fields. */
            pb_istream_t substream;
            uint8_t buffer[10];
            size_t size = sizeof(buffer);

            if (!read_raw_value(stream, wire_type, buffer, &size))
                return false;
            substream = pb_istream_from_buffer(buffer, size);

            return pCallback->funcs.decode(&substream, iter->current, pCallback->arg);
        }
    }

    default:
        PB_RETURN_ERROR(stream, "invalid field type");
    }
}