/*
* consinit:
* initialize the system console.
*/
void
consinit()
{
struct consdev *cp;
static int initted;
if (initted)
return;
initted = 1;
cp = NULL;
#if (NVGA > 0)
/* The font built into the VGA ROM is broken: all the characters
* above the 127th do not match the standard set expected by the
* console. E.g. boxes drawn using the ACS are incorrect. */
vga_no_builtinfont = 1;
#endif
if (!comconsole) {
#if (NVGA > 0) || (NIGSFB_OFBUS > 0)
#if (NIGSFB_OFBUS > 0)
if (!igsfb_ofbus_cnattach(&isa_io_bs_tag, &isa_mem_bs_tag)) {
#if (NPCKBC > 0)
pckbc_cnattach(&isa_io_bs_tag, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
#endif /* NPCKBC */
return;
}
#endif /* NIGSFB_OFBUS */
#if (NVGA_OFBUS > 0)
if (!vga_ofbus_cnattach(&isa_io_bs_tag, &isa_mem_bs_tag)) {
#if (NPCKBC > 0)
pckbc_cnattach(&isa_io_bs_tag, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
#endif /* NPCKBC */
return;
}
#endif /* NVGA_OFBUS */
#else /* NVGA */
#if (NOFCONS > 0)
cp = &ofcons;
ofcons_cnprobe(cp);
if (cp->cn_pri == CN_INTERNAL) {
ofcons_cninit(cp);
cn_tab = cp;
return;
}
#endif /* NOFCONS */
#endif /* NVGA */
}
#if (NCOM > 0)
if (comcnattach(&isa_io_bs_tag, CONADDR, CONSPEED, COM_FREQ,
COM_TYPE_NORMAL, comcnmode))
panic("can't init serial console");
#endif
}
/*
* console initialization
*/
void
c_isa_cons_init(void)
{
if (!com_console) {
#if NVGA_ISA > 0
if (vga_isa_cnattach(&arc_bus_io, &arc_bus_mem) == 0) {
#if NPCKBC > 0
pckbc_cnattach(&arc_bus_io, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0);
return;
#endif
}
#endif
#if NPC_ISA > 0
if (pccons_isa_cnattach(&arc_bus_io, &arc_bus_mem) == 0)
return;
#endif
}
#if NCOM > 0
if (com_console_address == 0)
com_console_address = IO_COM1;
comcnattach(&arc_bus_io, com_console_address,
com_console_speed, com_freq, COM_TYPE_NORMAL, com_console_mode);
#endif
}
/*
* consinit:
* initialize the system console.
* XXX - shouldn't deal with this initted thing, but then,
* it shouldn't be called from init386 either.
*/
void
consinit(void)
{
static int initted = 0;
union xen_cmdline_parseinfo xcp;
if (initted) {
return;
}
initted = 1;
xen_parse_cmdline(XEN_PARSE_CONSOLE, &xcp);
#if (NVGA > 0)
if (xendomain_is_privileged()) {
#ifdef CONS_OVERRIDE
if (strcmp(default_consinfo.devname, "tty0") == 0 ||
strcmp(default_consinfo.devname, "pc") == 0) {
#else
if (strcmp(xcp.xcp_console, "tty0") == 0 || /* linux name */
strcmp(xcp.xcp_console, "pc") == 0) { /* NetBSD name */
#endif /* CONS_OVERRIDE */
int error;
vga_cnattach(x86_bus_space_io, x86_bus_space_mem,
-1, 1);
error = ENODEV;
#if (NPCKBC > 0)
error = pckbc_cnattach(x86_bus_space_io, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0);
#endif
#if (NUKBD > 0)
if (error)
error = ukbd_cnattach();
#endif
if (error)
printf("WARNING: no console keyboard, "
"error=%d\n", error);
return;
}
}
#endif /* NVGA */
#if NXENCONS > 0
xenconscn_attach();
return;
#endif /* NXENCONS */
panic("consinit: no console");
}
#ifdef KGDB
void
kgdb_port_init(void)
{
#if (NCOM > 0)
if(!strcmp(kgdb_devname, "com")) {
bus_space_tag_t tag = x86_bus_space_io;
com_kgdb_attach(tag, comkgdbaddr, comkgdbrate, COM_FREQ,
COM_TYPE_NORMAL, comkgdbmode);
}
#endif
}
void
dec_kn300_cons_init()
{
struct ctb *ctb;
struct mcpcia_config *ccp;
extern struct mcpcia_config mcpcia_console_configuration;
ccp = &mcpcia_console_configuration;
/* It's already initialized. */
ctb = (struct ctb *)(((char *)hwrpb) + hwrpb->rpb_ctb_off);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if (comcnattach(&ccp->cc_iot, 0x3f8, comcnrate,
COM_FREQ, COM_TYPE_NORMAL,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8)) {
panic("can't init serial console");
}
break;
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&ccp->cc_iot, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
if (CTB_TURBOSLOT_TYPE(ctb->ctb_turboslot) ==
CTB_TURBOSLOT_TYPE_ISA)
isa_display_console(&ccp->cc_iot, &ccp->cc_memt);
else
pci_display_console(&ccp->cc_iot, &ccp->cc_memt,
&ccp->cc_pc, CTB_TURBOSLOT_BUS(ctb->ctb_turboslot),
CTB_TURBOSLOT_SLOT(ctb->ctb_turboslot), 0);
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb->ctb_term_type = 0x%lx\n", ctb->ctb_term_type);
printf("ctb->ctb_turboslot = 0x%lx\n", ctb->ctb_turboslot);
panic("consinit: unknown console type %ld",
ctb->ctb_term_type);
}
#ifdef KGDB
/* Attach the KGDB device. */
alpha_kgdb_init(kgdb_devlist, &ccp->cc_iot);
#endif /* KGDB */
}
void
wscninit(struct consdev *cp)
{
static int initted;
if (initted)
return;
initted = 1;
#if NSMFB > 0
{
extern int smfb_cnattach(void);
if (smfb_cnattach() != 0)
return;
}
#endif
#if NPCKBC > 0
{
extern struct mips_bus_space bonito_pci_io_space_tag;
if (!pckbc_cnattach(&bonito_pci_io_space_tag, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0 /* PCKBC_CANT_TRANSLATE */))
return;
}
#endif
}
static void
dec_2100_a50_cons_init()
{
struct ctb *ctb;
struct apecs_config *acp;
extern struct apecs_config apecs_configuration;
acp = &apecs_configuration;
apecs_init(acp, 0);
ctb = (struct ctb *)(((caddr_t)hwrpb) + hwrpb->rpb_ctb_off);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(&acp->ac_iot, 0x3f8, comcnrate,
COM_FREQ,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&acp->ac_iot, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
if (CTB_TURBOSLOT_TYPE(ctb->ctb_turboslot) ==
CTB_TURBOSLOT_TYPE_ISA)
isa_display_console(&acp->ac_iot, &acp->ac_memt);
else
pci_display_console(&acp->ac_iot, &acp->ac_memt,
&acp->ac_pc, CTB_TURBOSLOT_BUS(ctb->ctb_turboslot),
CTB_TURBOSLOT_SLOT(ctb->ctb_turboslot), 0);
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb->ctb_term_type = 0x%lx\n", ctb->ctb_term_type);
printf("ctb->ctb_turboslot = 0x%lx\n", ctb->ctb_turboslot);
panic("consinit: unknown console type %ld",
ctb->ctb_term_type);
}
}
/*
* consinit:
* initialize the system console.
* XXX - shouldn't deal with this initted thing, but then,
* it shouldn't be called from init_x86_64 either.
*/
void
consinit()
{
const struct btinfo_console *consinfo;
static int initted;
if (initted)
return;
initted = 1;
#ifndef CONS_OVERRIDE
consinfo = lookup_bootinfo(BTINFO_CONSOLE);
if (!consinfo)
#endif
consinfo = &default_consinfo;
#if (NPC > 0) || (NVGA > 0) || (NEGA > 0) || (NPCDISPLAY > 0)
if (!strcmp(consinfo->devname, "pc")) {
#if (NVGA > 0)
if (!vga_cnattach(X86_64_BUS_SPACE_IO, X86_64_BUS_SPACE_MEM,
-1, 1))
goto dokbd;
#endif
#if (NEGA > 0)
if (!ega_cnattach(X86_64_BUS_SPACE_IO, X86_64_BUS_SPACE_MEM))
goto dokbd;
#endif
#if (NPCDISPLAY > 0)
if (!pcdisplay_cnattach(X86_64_BUS_SPACE_IO, X86_64_BUS_SPACE_MEM))
goto dokbd;
#endif
#if (NPC > 0)
pccnattach();
#endif
if (0) goto dokbd; /* XXX stupid gcc */
dokbd:
#if (NPCKBC > 0)
pckbc_cnattach(X86_64_BUS_SPACE_IO, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
#endif
return;
}
#endif /* PC | VT | VGA | PCDISPLAY */
#if (NCOM > 0)
if (!strcmp(consinfo->devname, "com")) {
bus_space_tag_t tag = X86_64_BUS_SPACE_IO;
if (comcnattach(tag, consinfo->addr, consinfo->speed,
COM_FREQ, comcnmode))
panic("can't init serial console @%x", consinfo->addr);
return;
}
#endif
panic("invalid console device %s", consinfo->devname);
}
void
consinit()
{
const char *consdev;
/* Ask ARCS what it is using for console output. */
consdev = ARCBIOS->GetEnvironmentVariable("ConsoleOut");
if (consdev == NULL) {
printf("WARNING: ConsoleOut environment variable not set\n");
return;
}
switch (mach_type) {
case MACH_SGI_IP12:
case MACH_SGI_IP20:
case MACH_SGI_IP22:
if (gio_video_init(consdev) || zs_serial_init(consdev))
return;
break;
case MACH_SGI_IP32:
if (mace_serial_init(consdev))
return;
#if (NCRMFB > 0)
if (crmfb_probe()) {
#if notyet
#if (NPCKBC > 0)
/* XXX Hardcoded iotag, MACE address XXX */
pckbc_cnattach(SGIMIPS_BUS_SPACE_NORMAL,
MACE_BASE + 0x320000, 8,
PCKBC_KBD_SLOT);
#endif
#endif
return;
}
#else
panic("this ip32 kernel does not contain framebuffer support.");
#endif
break;
default:
panic("consinit(): unknown machine type IP%d\n", mach_type);
break;
}
printf("Using ARCS for console I/O.\n");
}
void
wscn_input_init(int pass)
{
if (pass != 0) {
#if NWSKBD > 0
wskbd_cndetach();
#endif
}
#if (NPCKBC > 0)
if (pass == 0 &&
pckbc_cnattach(X86_BUS_SPACE_IO, IO_KBD, KBCMDP, 0) == 0)
return;
#endif
#if (NUKBD > 0)
if (ukbd_cnattach() == 0)
return;
#endif
}
static int
gio_video_init(const char *consdev)
{
#if (NGIO > 0)
if (strcmp(consdev, "video()") == 0) {
/*
* XXX Assumes that if output is video()
* input must be keyboard().
*/
if (gio_cnattach() != 0)
return (0);
switch(mach_type) {
case MACH_SGI_IP12:
case MACH_SGI_IP20:
#if (NZSKBD > 0)
/* XXX Hardcoded unit, channel */
zskbd_cnattach(0, 0);
#endif
break;
case MACH_SGI_IP22:
#if (NPCKBC > 0)
/* XXX Hardcoded iotag, HPC address XXX */
pckbc_cnattach(SGIMIPS_BUS_SPACE_HPC,
HPC_BASE_ADDRESS_0 +
HPC3_PBUS_CH6_DEVREGS + IOC_KB_REGS, KBCMDP,
PCKBC_KBD_SLOT);
#endif
break;
}
return (1);
}
#endif
return (0);
}
static void
dec_2100_a500_cons_init(void)
{
struct ctb *ctb;
uint64_t ctbslot;
struct ttwoga_config *tcp;
ctb = (struct ctb *)(((char *)hwrpb) + hwrpb->rpb_ctb_off);
ctbslot = ctb->ctb_turboslot;
tcp = ttwoga_init(0, 0);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
assert(CTB_TURBOSLOT_HOSE(ctbslot) == 0);
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(&tcp->tc_iot, 0x3f8, comcnrate,
COM_FREQ, COM_TYPE_NORMAL,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&tcp->tc_iot, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0);
switch (CTB_TURBOSLOT_TYPE(ctbslot)) {
case CTB_TURBOSLOT_TYPE_ISA:
/*
* XXX The following is apparently necessary for an
* XXX ISA VGA card, but what happens with real EISA
* XXX VGA cards?
*/
case CTB_TURBOSLOT_TYPE_EISA:
isa_display_console(&tcp->tc_iot, &tcp->tc_memt);
break;
case CTB_TURBOSLOT_TYPE_PCI:
/* The display PCI might be different */
tcp = ttwoga_init(0, CTB_TURBOSLOT_HOSE(ctbslot));
pci_display_console(&tcp->tc_iot, &tcp->tc_memt,
&tcp->tc_pc, CTB_TURBOSLOT_BUS(ctbslot),
CTB_TURBOSLOT_SLOT(ctbslot), 0);
break;
default:
printf("type = 0x%lx, hose = 0x%lx, bus = 0x%lx, "
"slot = 0x%lx\n",
CTB_TURBOSLOT_TYPE(ctbslot),
CTB_TURBOSLOT_HOSE(ctbslot),
CTB_TURBOSLOT_BUS(ctbslot),
CTB_TURBOSLOT_SLOT(ctbslot));
panic("unknown display console type");
}
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb->ctb_term_type = 0x%lx\n", ctb->ctb_term_type);
printf("ctb->ctb_turboslot = 0x%lx\n", ctb->ctb_turboslot);
panic("consinit: unknown console type %ld",
ctb->ctb_term_type);
}
#ifdef KGDB
/* Attach the KGDB device. */
alpha_kgdb_init(kgdb_devlist, &tcp->tc_iot);
#endif /* KGDB */
}
void
consinit(void)
{
static int consinit_called = 0;
const char *console = CONSDEVNAME;
if (consinit_called != 0)
return;
consinit_called = 1;
#ifdef DIAGNOSTIC
printf("consinit(\"%s\")\n", console);
#endif
#if NISA > 0
/* Initialise the ISA subsystem early ... */
isa_footbridge_init(DC21285_PCI_IO_VBASE, DC21285_PCI_ISA_MEM_VBASE);
#endif
if (strncmp(console, "igsfb", 5) == 0) {
#if NIGSFB > 0
int res;
footbridge_pci_bs_tag_init();
/*
* XXX: uwe: special case mapping for the igsfb memory space.
*
* The problem with this is that when footbridge is
* attached during normal autoconfiguration the bus
* space tags will be reinited and these hooks lost.
* However, since igsfb(4) don't unmap memory during
* normal operation, this is ok. But if the igsfb is
* configured but is not a console, we waste 16M of
* kernel VA space.
*/
footbridge_pci_mem_bs_tag.bs_map = nw_footbridge_mem_bs_map;
footbridge_pci_mem_bs_tag.bs_unmap = nw_footbridge_mem_bs_unmap;
igsfb_pci_cnattach(&footbridge_pci_io_bs_tag,
&footbridge_pci_mem_bs_tag,
&footbridge_pci_chipset,
0, 8, 0);
#if NPCKBC > 0
res = pckbc_cnattach(&isa_io_bs_tag,
IO_KBD, KBCMDP, PCKBC_KBD_SLOT, 0);
if (res)
printf("pckbc_cnattach: %d!\n", res);
#endif
#else
panic("igsfb console not configured");
#endif /* NIGSFB */
} else {
#ifdef DIAGNOSTIC
if (strncmp(console, "com", 3) != 0) {
printf("consinit: unknown CONSDEVNAME=\"%s\","
" falling back to \"com\"\n", console);
}
#endif
#if NCOM > 0
if (comcnattach(&isa_io_bs_tag, CONCOMADDR, comcnspeed,
COM_FREQ, COM_TYPE_NORMAL, comcnmode))
panic("can't init serial console @%x", CONCOMADDR);
#else
panic("serial console @%x not configured", CONCOMADDR);
#endif
}
}
static void
dec_eb164_cons_init()
{
struct ctb *ctb;
struct cia_config *ccp;
extern struct cia_config cia_configuration;
ccp = &cia_configuration;
cia_init(ccp, 0);
ctb = (struct ctb *)(((caddr_t)hwrpb) + hwrpb->rpb_ctb_off);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(&ccp->cc_iot, 0x3f8, comcnrate,
COM_FREQ,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&ccp->cc_iot, IO_KBD, KBCMDP, 0);
/*
* On at least LX164, SRM reports an isa video board
* as a pci slot with 0xff as the bus and slot numbers.
* Since these values are not plausible from a pci point
* of view, it is safe to check for them.
*/
if (CTB_TURBOSLOT_TYPE(ctb->ctb_turboslot) ==
CTB_TURBOSLOT_TYPE_ISA ||
(CTB_TURBOSLOT_BUS(ctb->ctb_turboslot) == 0xff &&
CTB_TURBOSLOT_SLOT(ctb->ctb_turboslot) == 0xff))
isa_display_console(&ccp->cc_iot, &ccp->cc_memt);
else
pci_display_console(&ccp->cc_iot, &ccp->cc_memt,
&ccp->cc_pc, CTB_TURBOSLOT_BUS(ctb->ctb_turboslot),
CTB_TURBOSLOT_SLOT(ctb->ctb_turboslot), 0);
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb->ctb_term_type = 0x%lx\n", ctb->ctb_term_type);
printf("ctb->ctb_turboslot = 0x%lx\n", ctb->ctb_turboslot);
panic("consinit: unknown console type %ld",
ctb->ctb_term_type);
}
}
static void
dec_6600_cons_init()
{
struct ctb *ctb;
u_int64_t ctbslot;
struct tsp_config *tsp;
ctb = (struct ctb *)(((caddr_t)hwrpb) + hwrpb->rpb_ctb_off);
ctbslot = ctb->ctb_turboslot;
/* Console hose defaults to hose 0. */
tsp_console_hose = 0;
tsp = tsp_init(0, tsp_console_hose);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(&tsp->pc_iot, 0x3f8, comcnrate,
COM_FREQ,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(&tsp->pc_iot, IO_KBD, KBCMDP, 0);
if (CTB_TURBOSLOT_TYPE(ctbslot) ==
CTB_TURBOSLOT_TYPE_ISA)
isa_display_console(&tsp->pc_iot, &tsp->pc_memt);
else {
/* The display PCI might be different */
tsp_console_hose = CTB_TURBOSLOT_HOSE(ctbslot);
tsp = tsp_init(0, tsp_console_hose);
pci_display_console(&tsp->pc_iot, &tsp->pc_memt,
&tsp->pc_pc, CTB_TURBOSLOT_BUS(ctbslot),
CTB_TURBOSLOT_SLOT(ctbslot), 0);
}
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb_term_type = 0x%lx ctb_turboslot = 0x%lx"
" hose = %ld\n",
(unsigned long)ctb->ctb_term_type,
(unsigned long)ctbslot,
(unsigned long)CTB_TURBOSLOT_HOSE(ctbslot));
panic("consinit: unknown console type %lu",
(unsigned long)ctb->ctb_term_type);
}
}
void
dec_1000a_cons_init()
{
struct ctb *ctb;
struct cia_config *ccp;
struct apecs_config *acp;
extern struct cia_config cia_configuration;
extern struct apecs_config apecs_configuration;
bus_space_tag_t iot, memt;
struct alpha_pci_chipset *pcichipset;
if(strcmp(platform.iobus, "cia") == 0) {
ccp = &cia_configuration;
cia_init(ccp, 0);
iot = &ccp->cc_iot;
memt = &ccp->cc_memt;
pcichipset = &ccp->cc_pc;
} else {
acp = &apecs_configuration;
apecs_init(acp, 0);
iot = &acp->ac_iot;
memt = &acp->ac_memt;
pcichipset = &acp->ac_pc;
}
ctb = (struct ctb *)(((caddr_t)hwrpb) + hwrpb->rpb_ctb_off);
switch (ctb->ctb_term_type) {
case CTB_PRINTERPORT:
/* serial console ... */
/* XXX */
{
/*
* Delay to allow PROM putchars to complete.
* FIFO depth * character time,
* character time = (1000000 / (defaultrate / 10))
*/
DELAY(160000000 / comcnrate);
if(comcnattach(iot, 0x3f8, comcnrate,
COM_FREQ,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8))
panic("can't init serial console");
break;
}
case CTB_GRAPHICS:
#if NPCKBD > 0
/* display console ... */
/* XXX */
(void) pckbc_cnattach(iot, IO_KBD, KBCMDP, PCKBC_KBD_SLOT);
/*
* AlphaServer 1000s have a firmware bug whereby the
* built-in ISA VGA is reported incorrectly -- ctb_turboslot
* is mostly 0.
*/
switch (CTB_TURBOSLOT_TYPE(ctb->ctb_turboslot)) {
case CTB_TURBOSLOT_TYPE_PCI:
pci_display_console(iot, memt, pcichipset,
CTB_TURBOSLOT_BUS(ctb->ctb_turboslot),
CTB_TURBOSLOT_SLOT(ctb->ctb_turboslot), 0);
break;
default:
isa_display_console(iot, memt);
break;
}
#else
panic("not configured to use display && keyboard console");
#endif
break;
default:
printf("ctb->ctb_term_type = 0x%lx\n", ctb->ctb_term_type);
printf("ctb->ctb_turboslot = 0x%lx\n", ctb->ctb_turboslot);
panic("consinit: unknown console type %ld",
ctb->ctb_term_type);
}
#ifdef KGDB
/* Attach the KGDB device. */
alpha_kgdb_init(kgdb_devlist, iot);
#endif /* KGDB */
}
static void
pckbc_js_attach_common(struct pckbc_js_softc *jsc,
bus_space_tag_t iot, bus_addr_t ioaddr, int intr,
int isconsole)
{
struct pckbc_softc *sc = (struct pckbc_softc *)jsc;
struct pckbc_internal *t;
jsc->jsc_pckbc.intr_establish = pckbc_js_intr_establish;
jsc->jsc_intr = intr;
jsc->jsc_establised = 0;
if (isconsole) {
int status;
status = pckbc_cnattach(iot, ioaddr, KBCMDP, PCKBC_KBD_SLOT, 0);
if (status == 0)
aprint_normal(": cnattach ok");
else
aprint_error(": cnattach %d", status);
}
if (pckbc_is_console(iot, ioaddr)) {
t = &pckbc_consdata;
pckbc_console_attached = 1;
} else {
bus_space_handle_t ioh_d, ioh_c;
if (bus_space_map(iot, ioaddr + KBDATAP, 1, 0, &ioh_d) != 0) {
aprint_error(": unable to map data register\n");
return;
}
if (bus_space_map(iot, ioaddr + KBCMDP, 1, 0, &ioh_c) != 0) {
bus_space_unmap(iot, ioh_d, 1);
aprint_error(": unable to map cmd register\n");
return;
}
t = malloc(sizeof(struct pckbc_internal), M_DEVBUF, M_WAITOK);
memset(t, 0, sizeof(struct pckbc_internal));
t->t_iot = iot;
t->t_ioh_d = ioh_d;
t->t_ioh_c = ioh_c;
t->t_addr = ioaddr;
t->t_cmdbyte = KC8_CPU; /* initial command: enable ports */
callout_init(&t->t_cleanup, 0);
(void) pckbc_poll_data1(t, PCKBC_KBD_SLOT); /* flush */
if (pckbc_send_cmd(iot, ioh_c, KBC_SELFTEST) == 0)
aprint_error(": unable to request self test");
else {
int response;
response = pckbc_poll_data1(t, PCKBC_KBD_SLOT);
if (response == 0x55)
aprint_normal(": selftest ok");
else
aprint_error(": selftest failed (0x%02x)",
response);
}
}
/* crosslink */
t->t_sc = sc;
sc->id = t;
/* finish off the attach */
aprint_normal("\n");
pckbc_attach(sc);
}
static void
cninit_kd(void)
{
int kstdin, node;
char name[16];
#if (NAKBD > 0) || (NADBKBD > 0)
int akbd;
#endif
#if NUKBD > 0
struct usb_kbd_ihandles *ukbds;
int ukbd;
#endif
/*
* Attach the console output now (so we can see debugging messages,
* if any).
*/
#if NWSDISPLAY > 0
rascons_cnattach();
#endif
/*
* We must determine which keyboard type we have.
*/
if (OF_getprop(chosen, "stdin", &kstdin, sizeof(kstdin))
!= sizeof(kstdin)) {
printf("WARNING: no `stdin' property in /chosen\n");
return;
}
node = OF_instance_to_package(kstdin);
memset(name, 0, sizeof(name));
OF_getprop(node, "name", name, sizeof(name));
if (strcmp(name, "keyboard") != 0) {
printf("WARNING: stdin is not a keyboard: %s\n", name);
return;
}
memset(name, 0, sizeof(name));
OF_getprop(OF_parent(node), "name", name, sizeof(name));
#if NAKBD > 0
if (strcmp(name, "adb") == 0) {
printf("console keyboard type: ADB\n");
akbd_cnattach();
goto kbd_found;
}
#endif
#if NADBKBD > 0
if (strcmp(name, "adb") == 0) {
printf("console keyboard type: ADB\n");
adbkbd_cnattach();
goto kbd_found;
}
#endif
#if NPCKBC > 0
if (strcmp(name, "isa") == 0) {
printf("console keyboard type: PC Keyboard\n");
pckbc_cnattach(&genppc_isa_io_space_tag, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0);
goto kbd_found;
}
#endif
/*
* It is not obviously an ADB/PC keyboard. Could be USB,
* or ADB on some firmware versions (e.g.: iBook G4)
* This is not enough, we have a few more problems:
*
* (1) The stupid Macintosh firmware uses a
* `psuedo-hid' (no typo) or `pseudo-hid',
* which apparently merges all keyboards
* input into a single input stream.
* Because of this, we can't actually
* determine which controller or keyboard
* is really the console keyboard!
*
* (2) Even if we could, the keyboard can be USB,
* and this requires a lot of the kernel to
* be running in order for it to work.
*
* (3) If the keyboard is behind isa, we don't have enough
* kernel setup to use it yet, so punt to the ofroutines.
*
* So, what we do is this:
*
* (1) First check for OpenFirmware implementation
* that will not let us distinguish between
* USB and ADB. In that situation, try attaching
* anything as we can, and hope things get better
* at autoconfiguration time.
*
* (2) Assume the keyboard is USB.
* Tell the ukbd driver that it is the console.
* At autoconfiguration time, it will attach the
* first USB keyboard instance as the console
* keyboard.
*
* (3) Until then, so that we have _something_, we
* use the OpenFirmware I/O facilities to read
* the keyboard.
*/
/*
* stdin is /pseudo-hid/keyboard. There is no
* `adb-kbd-ihandle or `usb-kbd-ihandles methods
* available. Try attaching as ADB.
* But only if ADB support is actually present.
*
* XXX This must be called before pmap_bootstrap().
*/
if (strcmp(name, "pseudo-hid") == 0) {
int adb_node;
adb_node = OF_finddevice("/pci/mac-io/via-pmu/adb");
if (adb_node > 0) {
printf("ADB support found\n");
#if NAKBD > 0
akbd_cnattach();
#endif
#if NADBKBD > 0
adbkbd_cnattach();
#endif
} else {
/* must be USB */
printf("No ADB support present, assuming USB "
"keyboard\n");
#if NUKBD > 0
ukbd_cnattach();
#endif
}
goto kbd_found;
}
/*
* stdin is /psuedo-hid/keyboard. Test `adb-kbd-ihandle and
* `usb-kbd-ihandles to figure out the real keyboard(s).
*
* XXX This must be called before pmap_bootstrap().
*/
#if NUKBD > 0
if (OF_call_method("`usb-kbd-ihandles", stdin, 0, 1, &ukbds) >= 0 &&
ukbds != NULL && ukbds->ihandle != 0 &&
OF_instance_to_package(ukbds->ihandle) != -1) {
printf("usb-kbd-ihandles matches\n");
printf("console keyboard type: USB\n");
ukbd_cnattach();
goto kbd_found;
}
/* Try old method name. */
if (OF_call_method("`usb-kbd-ihandle", kstdin, 0, 1, &ukbd) >= 0 &&
ukbd != 0 &&
OF_instance_to_package(ukbd) != -1) {
printf("usb-kbd-ihandle matches\n");
printf("console keyboard type: USB\n");
kstdin = ukbd;
ukbd_cnattach();
goto kbd_found;
}
#endif
#if (NAKBD > 0) || (NADBKBD > 0)
if (OF_call_method("`adb-kbd-ihandle", kstdin, 0, 1, &akbd) >= 0 &&
akbd != 0 &&
OF_instance_to_package(akbd) != -1) {
printf("adb-kbd-ihandle matches\n");
printf("console keyboard type: ADB\n");
kstdin = akbd;
#if NAKBD > 0
akbd_cnattach();
#endif
#if NADBKBD > 0
adbkbd_cnattach();
#endif
goto kbd_found;
}
#endif
#if NUKBD > 0
/*
* XXX Old firmware does not have `usb-kbd-ihandles method. Assume
* XXX USB keyboard anyway.
*/
printf("defaulting to USB...");
printf("console keyboard type: USB\n");
ukbd_cnattach();
goto kbd_found;
#endif
/*
* No keyboard is found. Just return.
*/
printf("no console keyboard\n");
return;
kbd_found:;
#if NAKBD + NUKBD + NADBKBD + NPCKBC > 0
/*
* XXX This is a little gross, but we don't get to call
* XXX wskbd_cnattach() twice.
*/
ofkbd_ihandle = kstdin;
#if NWSDISPLAY > 0
wsdisplay_set_cons_kbd(ofkbd_cngetc, NULL, NULL);
#endif
#endif
}
/*
* consinit:
* initialize the system console.
* XXX - shouldn't deal with this initted thing, but then,
* it shouldn't be called from init386 either.
*/
void
consinit(void)
{
const struct btinfo_console *consinfo;
#if (NGENFB > 0)
const struct btinfo_framebuffer *fbinfo;
#endif
static int initted;
#if (NCOM > 0)
int rv;
#endif
if (initted)
return;
initted = 1;
#ifndef CONS_OVERRIDE
consinfo = lookup_bootinfo(BTINFO_CONSOLE);
if (!consinfo)
#endif
consinfo = &default_consinfo;
#if (NGENFB > 0)
fbinfo = lookup_bootinfo(BTINFO_FRAMEBUFFER);
#endif
if (!strcmp(consinfo->devname, "pc")) {
int error;
#if (NGENFB > 0)
if (fbinfo && fbinfo->physaddr > 0) {
if (x86_genfb_cnattach() == -1) {
initted = 0; /* defer */
return;
}
genfb_cnattach();
goto dokbd;
}
genfb_disable();
#endif
#if (NVGA > 0)
if (!vga_cnattach(x86_bus_space_io, x86_bus_space_mem,
-1, 1))
goto dokbd;
#endif
#if (NEGA > 0)
if (!ega_cnattach(x86_bus_space_io, x86_bus_space_mem))
goto dokbd;
#endif
#if (NPCDISPLAY > 0)
if (!pcdisplay_cnattach(x86_bus_space_io, x86_bus_space_mem))
goto dokbd;
#endif
if (0) goto dokbd; /* XXX stupid gcc */
dokbd:
error = ENODEV;
#if (NPCKBC > 0)
error = pckbc_cnattach(x86_bus_space_io, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT, 0);
#endif
#if (NUKBD > 0)
if (error)
error = ukbd_cnattach();
#endif
if (error)
printf("WARNING: no console keyboard, error=%d\n",
error);
return;
}
#if (NCOM > 0)
if (!strcmp(consinfo->devname, "com")) {
int addr = consinfo->addr;
int speed = consinfo->speed;
#if (NCOM_PUC > 0) && defined(PUC_CNAUTO)
puc_cnprobe(NULL);
rv = puc_cninit(NULL);
if (rv == 0)
return;
#endif
if (addr == 0)
addr = CONADDR;
if (speed == 0)
speed = CONSPEED;
rv = comcnattach(x86_bus_space_io, addr, speed,
COM_FREQ, COM_TYPE_NORMAL, comcnmode);
if (rv != 0)
panic("can't init serial console @%x", consinfo->addr);
return;
}
#endif
panic("invalid console device %s", consinfo->devname);
}
/*
* consinit
* Initialize system console.
*/
void
consinit(void)
{
struct btinfo_console *consinfo;
static int initted = 0;
#if (NGTEN > 0)
struct prep_pci_chipset pc;
#endif
if (initted)
return;
initted = 1;
consinfo = (struct btinfo_console *)lookup_bootinfo(BTINFO_CONSOLE);
if (!consinfo)
panic("not found console information in bootinfo");
#if (NPFB > 0)
if (!strcmp(consinfo->devname, "fb")) {
pfb_cnattach(consinfo->addr);
#if (NPCKBC > 0)
pckbc_cnattach(&genppc_isa_io_space_tag, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
#endif
return;
}
#endif
#if (NVGA > 0) || (NGTEN > 0)
if (!strcmp(consinfo->devname, "vga")) {
#if (NGTEN > 0)
prep_pci_get_chipset_tag(&pc);
#endif
#if (NGTEN > 0)
if (!gten_cnattach(&pc, &prep_mem_space_tag))
goto dokbd;
#endif
#if (NVGA > 0)
if (!vga_cnattach(&prep_io_space_tag, &prep_mem_space_tag,
-1, 1))
goto dokbd;
#endif
dokbd:
#if (NPCKBC > 0)
pckbc_cnattach(&genppc_isa_io_space_tag, IO_KBD, KBCMDP,
PCKBC_KBD_SLOT);
#endif
return;
}
#endif /* VGA | GTEN */
#if (NCOM > 0)
if (!strcmp(consinfo->devname, "com")) {
bus_space_tag_t tag = &genppc_isa_io_space_tag;
if(comcnattach(tag, consinfo->addr, consinfo->speed, COM_FREQ,
COM_TYPE_NORMAL,
((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8)))
panic("can't init serial console");
return;
}
#endif
panic("invalid console device %s", consinfo->devname);
}