int main (int argc, const char * argv [])
{
extern struct channel channel;
static const char *optv [] =
{
"C:i:eFN:p:P:qt:vx",
"-C file -P file -N file",
"Atheros Powerline Device Flash Utility for INT6300",
"C f\twrite CFG file to device using VS_SET_SDRAM",
"e\tredirect stderr messages to stdout",
#if defined (WINPCAP) || defined (LIBPCAP)
"i n\thost interface number [2]",
#else
"i s\thost interface name [" CHANNEL_ETHDEVICE "]",
#endif
"F[F]\tflash [force] NVRAM after firmware start using VS_MOD_NVM",
"N f\twrite NVM file to device using VS_WR_MEM",
"P f\twrite PIB file to device using VS_WR_MEM",
"q\tquiet mode",
#if defined (WINPCAP) || defined (LIBPCAP)
"t n\tread capture time is (n) milliseconds [50]",
#else
"t n\tread timeout is (n) milliseconds [50]",
#endif
"v\tverbose mode",
"x\texit on error",
(const char *) (0)
};
#include "../plc/plc.c"
char firmware [PLC_VERSION_STRING];
signed c;
if (getenv (PLCDEVICE))
{
#if defined (WINPCAP) || defined (LIBPCAP)
channel.ifindex = atoi (getenv (PLCDEVICE));
#else
channel.ifname = strdup (getenv (PLCDEVICE));
#endif
}
optind = 1;
opterr = 1;
while ((c = getoptv (argc, argv, optv)) != -1)
{
switch ((char) (c))
{
case 'i':
#if defined (WINPCAP) || defined (LIBPCAP)
channel.ifindex = atoi (optarg);
#else
channel.ifname = optarg;
#endif
break;
case 'q':
_setbits (channel.flags, CHANNEL_SILENCE);
break;
case 't':
channel.timeout = (unsigned)(uintspec (optarg, 0, UINT_MAX));
break;
case 'v':
_setbits (channel.flags, CHANNEL_VERBOSE);
break;
}
}
openchannel (&channel);
desuid ();
optind = 1;
opterr = 1;
while ((c = getoptv (argc, argv, optv)) != -1)
{
switch ((char) (c))
{
case 'C':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.CFG.file = open (optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", optarg);
}
if (sdramfile (plc.CFG.file, optarg, plc.flags))
{
error (1, ECANCELED, "CFG file %s is corrupt", optarg);
}
_setbits (plc.flags, PLC_SDRAM_CONFIG);
plc.CFG.name = optarg;
break;
case 'e':
dup2 (STDOUT_FILENO, STDERR_FILENO);
break;
case 'F':
_setbits (plc.module, PLC_MODULE_NVM_PIB);
if (_anyset (plc.flags, PLC_FLASH_DEVICE))
{
_setbits (plc.module, VS_MODULE_FORCE);
}
_setbits (plc.flags, PLC_FLASH_DEVICE);
break;
case 'N':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.NVM.file = open (optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", optarg);
}
plc.NVM.name = optarg;
if (nvmfile1 (&plc.NVM))
{
error (1, errno, "Bad firmware file: %s", plc.NVM.name);
}
_setbits (plc.flags, PLC_WRITE_MAC);
break;
case 'P':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.PIB.file = open (optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", optarg);
}
plc.PIB.name = optarg;
if (pibfile1 (&plc.PIB))
{
error (1, errno, "Bad parameter file: %s", plc.PIB.name);
}
_setbits (plc.flags, PLC_WRITE_PIB);
break;
case 'q':
_setbits (plc.flags, PLC_SILENCE);
break;
case 'v':
_setbits (plc.flags, PLC_VERBOSE);
break;
case 'x':
_setbits (plc.flags, PLC_BAILOUT);
break;
default:
break;
}
}
argc -= optind;
argv += optind;
if (argc)
{
error (1, ECANCELED, "Too many arguments");
}
if (plc.CFG.file == -1)
{
error (1, ECANCELED, "No CFG file specified");
}
if (plc.PIB.file == -1)
{
error (1, ECANCELED, "No PIB file specified");
}
if (plc.NVM.file == -1)
{
error (1, ECANCELED, "No NVM file specified");
}
if (!(plc.message = malloc (sizeof (struct message))))
{
error (1, errno, PLC_NOMEMORY);
}
if (WaitForStart (&plc, firmware, sizeof (firmware)))
{
Failure (&plc, "Device must be connected");
return (-1);
}
if (plc.hardwareID > CHIPSET_INT6300)
{
Failure (&plc, "Device must be %s or earlier; try using int6kboot.", chipsetname (CHIPSET_INT6300));
return (-1);
}
if (strcmp (firmware, "BootLoader"))
{
Failure (&plc, "Bootloader must be running");
return (-1);
}
if (!StartDevice1 (&plc))
{
if (_anyset (plc.flags, PLC_FLASH_DEVICE))
{
UpgradeDevice1 (&plc);
}
}
free (plc.message);
closechannel (&channel);
exit (0);
}
int main (int argc, char const * argv [])
{
extern struct channel channel;
static char const * optv [] =
{
"Fi:n:N:p:P:qt:vx",
"-N file -P file [-n file] [-p file]",
"Qualcomm Atheros INT6400 Host Emulator",
"F[F]\tflash (force) NVRAM using VS_MOD_NVM",
#if defined (WINPCAP) || defined (LIBPCAP)
"i n\thost interface is (n) [" LITERAL (CHANNEL_ETHNUMBER) "]",
#else
"i s\thost interface is (s) [" LITERAL (CHANNEL_ETHDEVICE) "]",
#endif
"n f\tread NVM from device into file using VS_RD_MOD",
"N f\twrite NVM file to device using VS_WR_MEM",
"p f\tread PIB from device into file using VS_RD_MOD",
"P f\twrite PIB file to device using VS_WR_MEM",
"q\tquiet mode",
"t n\tread timeout is (n) milliseconds [" LITERAL (CHANNEL_TIMEOUT) "]",
"v\tverbose mode",
"x\texit on error",
(char const *) (0)
};
#include "../plc/plc.c"
signed c;
if (getenv (PLCDEVICE))
{
#if defined (WINPCAP) || defined (LIBPCAP)
channel.ifindex = atoi (getenv (PLCDEVICE));
#else
channel.ifname = strdup (getenv (PLCDEVICE));
#endif
}
optind = 1;
while ((c = getoptv (argc, argv, optv)) != -1)
{
switch (c)
{
case 'i':
#if defined (WINPCAP) || defined (LIBPCAP)
channel.ifindex = atoi (optarg);
#else
channel.ifname = optarg;
#endif
break;
case 'q':
_setbits (channel.flags, CHANNEL_SILENCE);
break;
case 't':
channel.timeout = (signed)(uintspec (optarg, 0, UINT_MAX));
break;
case 'v':
_setbits (channel.flags, CHANNEL_VERBOSE);
break;
}
}
openchannel (&channel);
desuid ();
optind = 1;
while ((c = getoptv (argc, argv, optv)) != -1)
{
switch (c)
{
case 'F':
_setbits (plc.module, (VS_MODULE_MAC | VS_MODULE_PIB));
if (_anyset (plc.flags, PLC_FLASH_DEVICE))
{
_setbits (plc.module, VS_MODULE_FORCE);
}
_setbits (plc.flags, PLC_FLASH_DEVICE);
break;
case 'N':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.NVM.file = open (plc.NVM.name = optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc.NVM.name);
}
if (nvmfile1 (&plc.NVM))
{
error (1, errno, "Bad firmware file: %s", plc.NVM.name);
}
_setbits (plc.flags, PLC_WRITE_MAC);
break;
case 'n':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.nvm.file = open (plc.nvm.name = optarg, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.nvm.name);
}
break;
case 'P':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.PIB.file = open (plc.PIB.name = optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc.PIB.name);
}
if (pibfile1 (&plc.PIB))
{
error (1, errno, "Bad parameter file: %s", plc.PIB.name);
}
_setbits (plc.flags, PLC_WRITE_PIB);
break;
case 'p':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.pib.file = open (plc.pib.name = optarg, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.pib.name);
}
break;
case 'q':
_setbits (plc.flags, PLC_SILENCE);
break;
case 'v':
_setbits (plc.flags, PLC_VERBOSE);
break;
case 'x':
_setbits (plc.flags, PLC_BAILOUT);
break;
default:
break;
}
}
argc -= optind;
argv += optind;
if (argc)
{
error (1, ENOTSUP, ERROR_TOOMANY);
}
if (plc.NVM.file == -1)
{
error (1, ECANCELED, "No host NVM file named");
}
if (plc.PIB.file == -1)
{
error (1, ECANCELED, "No host PIB file named");
}
if (plc.nvm.file == -1)
{
if ((plc.nvm.file = open (plc.nvm.name = NEWNVM, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.nvm.name);
}
}
if (plc.pib.file == -1)
{
if ((plc.pib.file = open (plc.pib.name = NEWPIB, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.pib.name);
}
}
if (!(plc.message = malloc (sizeof (* plc.message))))
{
error (1, errno, PLC_NOMEMORY);
}
function (&plc);
free (plc.message);
closechannel (&channel);
exit (0);
}
int main (int argc, char const * argv [])
{
extern struct channel channel;
extern struct key const keys [];
static char const * optv [] =
{
"aB:C:d:D:efFHi:IJ:K:l:mMn:N:p:P:QqrRS:st:Tvw:x",
"device [device] [...]",
"Qualcomm Atheros INT6x00 Powerline Device Manager",
"a\tread device attributes using VS_OP_ATTRIBUTES",
"B n\tperform pushbutton action (n) using MS_PB_ENC [1|2|3|'join'|'leave'|'status']",
"C n\tflash NVRAM with module (n) using VS_MOD_NVM [1|2|3|'nvm'|'pib'|'both']",
"d f\tdump and clear watchdog report to file (f) using VS_WD_RPT",
"D x\tset DAK to (x) for option -J [" DAK1 "]",
"e\tredirect stderr to stdout",
"f\tread NVRAM Configuration using VS_GET_NVM",
"F[F]\tflash [force] NVRAM with PIB and firmware using VS_MOD_NVM",
"H\tstop host action requests using VS_HOST_ACTION.IND",
#if defined (WINPCAP) || defined (LIBPCAP)
"i n\thost interface is (n) [" LITERAL (CHANNEL_ETHNUMBER) "]",
#else
"i s\thost interface is (s) [" LITERAL (CHANNEL_ETHDEVICE) "]",
#endif
"I\tread device identity using VS_RD_MOD",
"J x\tset NMK on remote device (x) via local device using VS_SET_KEY (see -K)",
"K x\tset NMK to (x) for options -J and -M [" NMK1 "]",
"l n\tloop (n) times [" LITERAL (INT6K_LOOP) "]",
"m\tread network membership information using VS_NW_INFO",
"M\tset NMK on local device using VS_SET_KEY (see -K)",
"n f\tread NVM from SDRAM to file (f) using VS_RD_MOD",
"N f\twrite NVM file (f) to SDRAM using VS_WR_MOD",
"p f\tread PIB from SDRAM to file (f) using VS_RD_MOD",
"P f\twrite PIB file (f) to SDRAM using VS_WR_MOD",
"q\tquiet mode",
"Q\tquick flash (return immediately)",
"r\tread hardware and firmware revision using VS_SW_VER",
"R\treset device using VS_RS_DEV",
"s\tread SDRAM Configuration using VS_RD_CBLOCK",
"S f\twrite an SDRAM Configuration file (f) using VS_SET_SDRAM",
"t n\tread timeout is (n) milliseconds [" LITERAL (CHANNEL_TIMEOUT) "]",
"T\trestore factory defaults using VS_FAC_DEFAULTS",
"v\tverbose mode",
"w n\tpause (n) seconds [" LITERAL (INT6K_WAIT) "]",
"x\texit on error",
(char const *) (0)
};
#include "../plc/plc.c"
signed loop = INT6K_LOOP;
signed wait = INT6K_WAIT;
signed c;
if (getenv (PLCDEVICE))
{
#if defined (WINPCAP) || defined (LIBPCAP)
channel.ifindex = atoi (getenv (PLCDEVICE));
#else
channel.ifname = strdup (getenv (PLCDEVICE));
#endif
}
optind = 1;
while ((c = getoptv (argc, argv, optv)) != -1)
{
switch (c)
{
case 'a':
_setbits (plc.flags, PLC_ATTRIBUTES);
break;
case 'B':
_setbits (plc.flags, PLC_PUSH_BUTTON);
plc.pushbutton = (unsigned)(uintspec (synonym (optarg, buttons, SIZEOF (buttons)), 0, UCHAR_MAX));
break;
case 'C':
_setbits (plc.flags, PLC_FLASH_DEVICE);
plc.module = (unsigned)(uintspec (synonym (optarg, modules, SIZEOF (modules)), 0, UCHAR_MAX));
break;
case 'd':
_setbits (plc.flags, PLC_WATCHDOG_REPORT);
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.rpt.file = open (plc.rpt.name = optarg, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.rpt.name);
}
#ifndef WIN32
chown (optarg, getuid (), getgid ());
#endif
plc.readaction = 3;
break;
case 'D':
if (!strcmp (optarg, "none"))
{
memcpy (plc.DAK, keys [0].DAK, sizeof (plc.DAK));
break;
}
if (!strcmp (optarg, "key1"))
{
memcpy (plc.DAK, keys [1].DAK, sizeof (plc.DAK));
break;
}
if (!strcmp (optarg, "key2"))
{
memcpy (plc.DAK, keys [2].DAK, sizeof (plc.DAK));
break;
}
if (!hexencode (plc.DAK, sizeof (plc.DAK), (char const *)(optarg)))
{
error (1, errno, PLC_BAD_DAK, optarg);
}
break;
case 'e':
dup2 (STDOUT_FILENO, STDERR_FILENO);
break;
case 'f':
_setbits (plc.flags, PLC_NVRAM_INFO);
break;
case 'F':
_setbits (plc.module, (VS_MODULE_MAC | VS_MODULE_PIB));
if (_anyset (plc.flags, PLC_FLASH_DEVICE))
{
_setbits (plc.module, VS_MODULE_FORCE);
}
_setbits (plc.flags, PLC_FLASH_DEVICE);
break;
case 'H':
_setbits (plc.flags, PLC_HOST_ACTION);
break;
case 'I':
_setbits (plc.flags, PLC_READ_IDENTITY);
break;
case 'i':
#if defined (WINPCAP) || defined (LIBPCAP)
channel.ifindex = atoi (optarg);
#else
channel.ifname = optarg;
#endif
break;
case 'J':
if (!hexencode (plc.RDA, sizeof (plc.RDA), (char const *)(optarg)))
{
error (1, errno, PLC_BAD_MAC, optarg);
}
_setbits (plc.flags, PLC_SETREMOTEKEY);
break;
case 'K':
if (!strcmp (optarg, "none"))
{
memcpy (plc.NMK, keys [0].NMK, sizeof (plc.NMK));
break;
}
if (!strcmp (optarg, "key1"))
{
memcpy (plc.NMK, keys [1].NMK, sizeof (plc.NMK));
break;
}
if (!strcmp (optarg, "key2"))
{
memcpy (plc.NMK, keys [2].NMK, sizeof (plc.NMK));
break;
}
if (!hexencode (plc.NMK, sizeof (plc.NMK), (char const *)(optarg)))
{
error (1, errno, PLC_BAD_NMK, optarg);
}
break;
case 'M':
_setbits (plc.flags, PLC_SETLOCALKEY);
break;
case 'l':
loop = (unsigned)(uintspec (optarg, 0, UINT_MAX));
break;
case 'm':
_setbits (plc.flags, PLC_NETWORK);
break;
case 'N':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.NVM.file = open (plc.NVM.name = optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc.NVM.name);
}
if (nvmfile1 (&plc.NVM))
{
error (1, errno, "Bad firmware file: %s", plc.NVM.name);
}
_setbits (plc.flags, PLC_WRITE_MAC);
break;
case 'n':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.nvm.file = open (plc.nvm.name = optarg, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.nvm.name);
}
#ifndef WIN32
chown (optarg, getuid (), getgid ());
#endif
_setbits (plc.flags, PLC_READ_MAC);
break;
case 'P':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.PIB.file = open (plc.PIB.name = optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc.PIB.name);
}
if (pibfile1 (&plc.PIB))
{
error (1, errno, "Bad parameter file: %s", plc.PIB.name);
}
_setbits (plc.flags, PLC_WRITE_PIB);
break;
case 'p':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.pib.file = open (plc.pib.name = optarg, O_BINARY|O_CREAT|O_RDWR|O_TRUNC, FILE_FILEMODE)) == -1)
{
error (1, errno, "%s", plc.pib.name);
}
#ifndef WIN32
chown (optarg, getuid (), getgid ());
#endif
_setbits (plc.flags, PLC_READ_PIB);
break;
case 'Q':
_setbits (plc.flags, PLC_QUICK_FLASH);
break;
case 'q':
_setbits (channel.flags, CHANNEL_SILENCE);
_setbits (plc.flags, PLC_SILENCE);
break;
case 'R':
_setbits (plc.flags, PLC_RESET_DEVICE);
break;
case 'r':
_setbits (plc.flags, PLC_VERSION);
break;
case 'S':
if (!checkfilename (optarg))
{
error (1, EINVAL, "%s", optarg);
}
if ((plc.CFG.file = open (plc.CFG.name = optarg, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", plc.CFG.name);
}
if (sdramfile (plc.CFG.file, optarg, plc.flags))
{
error (1, ECANCELED, "SDRAM config file %s is corrupt", optarg);
}
_setbits (plc.flags, PLC_SDRAM_CONFIG);
break;
case 's':
_setbits (plc.flags, PLC_SDRAM_INFO);
break;
case 't':
channel.timeout = (signed)(uintspec (optarg, 0, UINT_MAX));
break;
case 'T':
_setbits (plc.flags, PLC_FACTORY_DEFAULTS);
break;
case 'v':
_setbits (channel.flags, CHANNEL_VERBOSE);
_setbits (plc.flags, PLC_VERBOSE);
break;
case 'V':
_setbits (plc.flags, PLC_SNIFFER);
plc.action = (uint8_t)(uintspec (optarg, 0, UCHAR_MAX));
break;
case 'w':
wait = (unsigned)(uintspec (optarg, 0, 3600));
break;
case 'x':
_setbits (plc.flags, PLC_BAILOUT);
break;
default:
break;
}
}
argc -= optind;
argv += optind;
if (argc != 1)
{
if (plc.nvm.file != -1)
{
error (1, ECANCELED, PLC_NODEVICE);
}
if (plc.pib.file != -1)
{
error (1, ECANCELED, PLC_NODEVICE);
}
if (plc.rpt.file != -1)
{
error (1, ECANCELED, PLC_NODEVICE);
}
}
openchannel (&channel);
if (!(plc.message = malloc (sizeof (* plc.message))))
{
error (1, errno, PLC_NOMEMORY);
}
if (!argc)
{
manager (&plc, loop, wait);
}
while ((argc) && (* argv))
{
if (!hexencode (channel.peer, sizeof (channel.peer), synonym (* argv, devices, SIZEOF (devices))))
{
error (1, errno, PLC_BAD_MAC, * argv);
}
manager (&plc, loop, wait);
argc--;
argv++;
}
free (plc.message);
closechannel (&channel);
exit (0);
}
int main (int argc, char const * argv [])
{
static char const * optv [] =
{
"eqv",
"pibfile",
"Atheros Classification Rule Dump Utility",
"e\tredirect stderr messages to stdout",
"q\tquiet mode",
"v\tverbose mode",
(char const *) (0)
};
struct auto_connection auto_connection [PIB_MAX_AUTOCONN];
struct classifier_priority_map classifier_priority_map [PIB_MAX_PRIORITY_MAPS];
uint32_t AutoConnection_count;
uint32_t PriorityMaps_count;
unsigned i;
flag_t flags = (flag_t)(0);
struct _file_ pib;
signed c;
optind = 1;
while ((c = getoptv (argc, argv, optv)) != -1)
{
switch ((char) (c))
{
case 'e':
dup2 (STDOUT_FILENO, STDERR_FILENO);
break;
case 'q':
_setbits (flags, PIB_SILENCE);
break;
case 'v':
_setbits (flags, PIB_VERBOSE);
break;
default:
break;
}
}
argc -= optind;
argv += optind;
while ((argc) && (* argv))
{
pib.name = * argv;
if ((pib.file = open (pib.name, O_BINARY|O_RDONLY)) == -1)
{
error (1, errno, "%s", pib.name);
}
if (pibfile1 (&pib))
{
error (1, errno, "Bad PIB file: %s", pib.name);
}
if (lseek (pib.file, PIB_AUTOCONN_COUNT_OFFSET, SEEK_SET) != PIB_AUTOCONN_COUNT_OFFSET)
{
error (1, errno, "could not seek to AutoConnection count");
}
if (read (pib.file, &AutoConnection_count, sizeof (AutoConnection_count)) != sizeof (AutoConnection_count))
{
error (1, errno, "could not read AutoConnection count");
}
if (lseek (pib.file, PIB_AUTOCONN_OFFSET, SEEK_SET) != PIB_AUTOCONN_OFFSET)
{
error (1, errno, "could not seek to AutoConnections");
}
if (read (pib.file, &auto_connection, sizeof (auto_connection)) != sizeof (auto_connection))
{
error (1, errno, "could not read AutoConnections");
}
if (lseek (pib.file, PIB_PRIORITY_COUNT_OFFSET, SEEK_SET) != PIB_PRIORITY_COUNT_OFFSET)
{
error (1, errno, "could not seek to PriorityMaps count");
}
if (read (pib.file, &PriorityMaps_count, sizeof (PriorityMaps_count)) != sizeof (PriorityMaps_count))
{
error (1, errno, "could not read PriorityMaps count");
}
if (lseek (pib.file, PIB_PRIORITY_MAPS_OFFSET, SEEK_SET) != PIB_PRIORITY_MAPS_OFFSET)
{
error (1, errno, "could not seek to Priority Map");
}
if (read (pib.file, &classifier_priority_map, sizeof (classifier_priority_map)) != sizeof (classifier_priority_map))
{
error (1, errno, "could not read Priority Map");
}
close (pib.file);
if (_allclr (flags, PIB_SILENCE))
{
printf ("# auto connection rules:\n");
}
for (i = 0; i < AutoConnection_count; ++i)
{
AutoConnection (&auto_connection [i]);
}
if (_allclr (flags, PIB_SILENCE))
{
printf ("# priority mapping rules:\n");
}
for (i = 0; i < PriorityMaps_count; ++i)
{
ClassifierPriorityMap (&classifier_priority_map [i]);
}
argv++;
argc--;
}
exit (0);
}
