/*!
 * \brief   pixaWriteFiles()
 *
 * \param[in]    rootname
 * \param[in]    pixa
 * \param[in]    format  defined in imageio.h; see notes for default
 * \return  0 if OK; 1 on error
 *
 * <pre>
 * Notes:
 *      (1) Use %format = IFF_DEFAULT to decide the output format
 *          individually for each pix.
 * </pre>
 */
l_int32
pixaWriteFiles(const char  *rootname,
               PIXA        *pixa,
               l_int32      format)
{
char     bigbuf[L_BUF_SIZE];
l_int32  i, n, pixformat;
PIX     *pix;

    PROCNAME("pixaWriteFiles");

    if (!rootname)
        return ERROR_INT("rootname not defined", procName, 1);
    if (!pixa)
        return ERROR_INT("pixa not defined", procName, 1);
    if (format < 0 || format == IFF_UNKNOWN ||
        format >= NumImageFileFormatExtensions)
        return ERROR_INT("invalid format", procName, 1);

    n = pixaGetCount(pixa);
    for (i = 0; i < n; i++) {
        pix = pixaGetPix(pixa, i, L_CLONE);
        if (format == IFF_DEFAULT)
            pixformat = pixChooseOutputFormat(pix);
        else
            pixformat = format;
        snprintf(bigbuf, L_BUF_SIZE, "%s%03d.%s", rootname, i,
                 ImageFileFormatExtensions[pixformat]);
        pixWrite(bigbuf, pix, pixformat);
        pixDestroy(&pix);
    }

    return 0;
}
Exemplo n.º 2
0
/*!
 *  pixWriteMem()
 *
 *      Input:  &data (<return> data of tiff compressed image)
 *              &size (<return> size of returned data)
 *              pix
 *              format  (defined in imageio.h)
 *      Return: 0 if OK, 1 on error
 *
 *  Notes:
 *      (1) On windows, this will only write tiff and PostScript to memory.
 *          For other formats, it requires open_memstream(3).
 *      (2) PostScript output is uncompressed, in hex ascii.
 *          Most printers support level 2 compression (tiff_g4 for 1 bpp,
 *          jpeg for 8 and 32 bpp).
 */
l_int32
pixWriteMem(l_uint8  **pdata,
            size_t    *psize,
            PIX       *pix,
            l_int32    format)
{
l_int32  ret;

    PROCNAME("pixWriteMem");

    if (!pdata)
        return ERROR_INT("&data not defined", procName, 1 );
    if (!psize)
        return ERROR_INT("&size not defined", procName, 1 );
    if (!pix)
        return ERROR_INT("&pix not defined", procName, 1 );

    if (format == IFF_DEFAULT)
        format = pixChooseOutputFormat(pix);

    switch(format)
    {
    case IFF_BMP:
        ret = pixWriteMemBmp(pdata, psize, pix);
        break;

    case IFF_JFIF_JPEG:   /* default quality; baseline sequential */
        ret = pixWriteMemJpeg(pdata, psize, pix, 75, 0);
        break;

    case IFF_PNG:   /* no gamma value stored */
        ret = pixWriteMemPng(pdata, psize, pix, 0.0);
        break;

    case IFF_TIFF:           /* uncompressed */
    case IFF_TIFF_PACKBITS:  /* compressed, binary only */
    case IFF_TIFF_RLE:       /* compressed, binary only */
    case IFF_TIFF_G3:        /* compressed, binary only */
    case IFF_TIFF_G4:        /* compressed, binary only */
    case IFF_TIFF_LZW:       /* compressed, all depths */
    case IFF_TIFF_ZIP:       /* compressed, all depths */
        ret = pixWriteMemTiff(pdata, psize, pix, format);
        break;

    case IFF_PNM:
        ret = pixWriteMemPnm(pdata, psize, pix);
        break;

    case IFF_PS:
        ret = pixWriteMemPS(pdata, psize, pix, NULL, 0, DEFAULT_SCALING);
        break;

    case IFF_GIF:
        ret = pixWriteMemGif(pdata, psize, pix);
        break;

    case IFF_JP2:
        return ERROR_INT("jp2 not supported", procName, 1);
        break;

    case IFF_SPIX:
        ret = pixWriteMemSpix(pdata, psize, pix);
        break;

    default:
        return ERROR_INT("unknown format", procName, 1);
        break;
    }

    return ret;
}
Exemplo n.º 3
0
/*!
 *  pixWriteStream()
 *
 *      Input:  stream
 *              pix
 *              format
 *      Return: 0 if OK; 1 on error.
 */
l_int32
pixWriteStream(FILE    *fp,
               PIX     *pix,
               l_int32  format)
{
    PROCNAME("pixWriteStream");

    if (!fp)
        return ERROR_INT("stream not defined", procName, 1);
    if (!pix)
        return ERROR_INT("pix not defined", procName, 1);

    if (format == IFF_DEFAULT)
        format = pixChooseOutputFormat(pix);

    switch(format)
    {
    case IFF_BMP:
        pixWriteStreamBmp(fp, pix);
        break;

    case IFF_JFIF_JPEG:   /* default quality; baseline sequential */
        return pixWriteStreamJpeg(fp, pix, 75, 0);
        break;

    case IFF_PNG:   /* no gamma value stored */
        return pixWriteStreamPng(fp, pix, 0.0);
        break;

    case IFF_TIFF:           /* uncompressed */
    case IFF_TIFF_PACKBITS:  /* compressed, binary only */
    case IFF_TIFF_RLE:       /* compressed, binary only */
    case IFF_TIFF_G3:        /* compressed, binary only */
    case IFF_TIFF_G4:        /* compressed, binary only */
    case IFF_TIFF_LZW:       /* compressed, all depths */
    case IFF_TIFF_ZIP:       /* compressed, all depths */
        return pixWriteStreamTiff(fp, pix, format);
        break;

    case IFF_PNM:
        return pixWriteStreamPnm(fp, pix);
        break;

    case IFF_GIF:
        return pixWriteStreamGif(fp, pix);
        break;

    case IFF_PS:
        return pixWriteStreamPS(fp, pix, NULL, 0, DEFAULT_SCALING);
        break;

    case IFF_JP2:
        return ERROR_INT("jp2 format not supported", procName, 1);
        break;

    case IFF_WEBP:
        return pixWriteStreamWebP(fp, pix, 80, 0);
        break;

    case IFF_LPDF:
        return pixWriteStreamPdf(fp, pix, 0, NULL);
        break;

    case IFF_SPIX:
        return pixWriteStreamSpix(fp, pix);
        break;

    default:
        return ERROR_INT("unknown format", procName, 1);
        break;
    }

    return 0;
}
Exemplo n.º 4
0
/*!
 *  pixWrite()
 *
 *      Input:  filename
 *              pix
 *              format  (defined in imageio.h)
 *      Return: 0 if OK; 1 on error
 *
 *  Notes:
 *      (1) Open for write using binary mode (with the "b" flag)
 *          to avoid having Windows automatically translate the NL
 *          into CRLF, which corrupts image files.  On non-windows
 *          systems this flag should be ignored, per ISO C90.
 *          Thanks to Dave Bryan for pointing this out.
 *      (2) If the default image format is requested, we use the input format;
 *          if the input format is unknown, a lossless format is assigned.
 *      (3) There are two modes with respect to file naming.
 *          (a) The default code writes to @filename.
 *          (b) If WRITE_AS_NAMED is defined to 0, it's a bit fancier.
 *              Then, if @filename does not have a file extension, one is
 *              automatically appended, depending on the requested format.
 *          The original intent for providing option (b) was to insure
 *          that filenames on Windows have an extension that matches
 *          the image compression.  However, this is not the default.
 */
l_int32
pixWrite(const char  *filename,
         PIX         *pix,
         l_int32      format)
{
char  *fname;
FILE  *fp;

    PROCNAME("pixWrite");

    if (!pix)
        return ERROR_INT("pix not defined", procName, 1);
    if (!filename)
        return ERROR_INT("filename not defined", procName, 1);
    if (format == IFF_JP2)
        return ERROR_INT("jp2 not supported", procName, 1);

    fname = genPathname(filename, NULL);

#if  WRITE_AS_NAMED  /* Default */

    if ((fp = fopenWriteStream(fname, "wb+")) == NULL) {
        FREE(fname);
        return ERROR_INT("stream not opened", procName, 1);
    }

#else  /* Add an extension to the output name if none exists */

    {l_int32  extlen;
     char    *extension, *filebuf;
        splitPathAtExtension(fname, NULL, &extension);
        extlen = strlen(extension);
        FREE(extension);
        if (extlen == 0) {
            if (format == IFF_DEFAULT || format == IFF_UNKNOWN)
                format = pixChooseOutputFormat(pix);

            filebuf = (char *)CALLOC(strlen(fname) + 10, sizeof(char));
            if (!filebuf) {
                return ERROR_INT("filebuf not made", procName, 1);
                FREE(fname);
            }
            strncpy(filebuf, fname, strlen(fname));
            strcat(filebuf, ".");
            strcat(filebuf, ImageFileFormatExtensions[format]);
        } else {
            filebuf = (char *)fname;
        }

        fp = fopenWriteStream(filebuf, "wb+");
        if (filebuf != fname)
            FREE(filebuf);
        if (fp == NULL) {
            FREE(fname);
            return ERROR_INT("stream not opened", procName, 1);
        }
    }

#endif  /* WRITE_AS_NAMED */

    FREE(fname);
    if (pixWriteStream(fp, pix, format)) {
        fclose(fp);
        return ERROR_INT("pix not written to stream", procName, 1);
    }

        /* Close the stream except if GIF under windows, because
         * EGifCloseFile() closes the windows file stream! */
    if (format != IFF_GIF)
        fclose(fp);
#ifndef _WIN32
    else  /* gif file */
        fclose(fp);
#endif  /* ! _WIN32 */

    return 0;
}
/*!
 * \brief   pixWrite()
 *
 * \param[in]    filename
 * \param[in]    pix
 * \param[in]    format  defined in imageio.h
 * \return  0 if OK; 1 on error
 *
 * <pre>
 * Notes:
 *      (1) Open for write using binary mode (with the "b" flag)
 *          to avoid having Windows automatically translate the NL
 *          into CRLF, which corrupts image files.  On non-windows
 *          systems this flag should be ignored, per ISO C90.
 *          Thanks to Dave Bryan for pointing this out.
 *      (2) If the default image format IFF_DEFAULT is requested:
 *          use the input format if known; otherwise, use a lossless format.
 *      (3) There are two modes with respect to file naming.
 *          (a) The default code writes to %filename.
 *          (b) If WRITE_AS_NAMED is defined to 0, it's a bit fancier.
 *              Then, if %filename does not have a file extension, one is
 *              automatically appended, depending on the requested format.
 *          The original intent for providing option (b) was to insure
 *          that filenames on Windows have an extension that matches
 *          the image compression.  However, this is not the default.
 * </pre>
 */
l_int32
pixWrite(const char  *filename,
         PIX         *pix,
         l_int32      format)
{
char  *fname;
FILE  *fp;

    PROCNAME("pixWrite");

    if (!pix)
        return ERROR_INT("pix not defined", procName, 1);
    if (!filename)
        return ERROR_INT("filename not defined", procName, 1);

    fname = genPathname(filename, NULL);

#if  WRITE_AS_NAMED  /* Default */

    if ((fp = fopenWriteStream(fname, "wb+")) == NULL) {
        LEPT_FREE(fname);
        return ERROR_INT("stream not opened", procName, 1);
    }

#else  /* Add an extension to the output name if none exists */

    {l_int32  extlen;
     char    *extension, *filebuf;
        splitPathAtExtension(fname, NULL, &extension);
        extlen = strlen(extension);
        LEPT_FREE(extension);
        if (extlen == 0) {
            if (format == IFF_DEFAULT || format == IFF_UNKNOWN)
                format = pixChooseOutputFormat(pix);

            filebuf = (char *)LEPT_CALLOC(strlen(fname) + 10, sizeof(char));
            if (!filebuf) {
                return ERROR_INT("filebuf not made", procName, 1);
                LEPT_FREE(fname);
            }
            strncpy(filebuf, fname, strlen(fname));
            strcat(filebuf, ".");
            strcat(filebuf, ImageFileFormatExtensions[format]);
        } else {
            filebuf = (char *)fname;
        }

        fp = fopenWriteStream(filebuf, "wb+");
        if (filebuf != fname)
            LEPT_FREE(filebuf);
        if (fp == NULL) {
            LEPT_FREE(fname);
            return ERROR_INT("stream not opened", procName, 1);
        }
    }

#endif  /* WRITE_AS_NAMED */

    LEPT_FREE(fname);
    if (pixWriteStream(fp, pix, format)) {
        fclose(fp);
        return ERROR_INT("pix not written to stream", procName, 1);
    }
    fclose(fp);

    return 0;
}