Exemplo n.º 1
0
/* Plus4-specific initialization.  */
int machine_specific_init(void)
{
    int delay;

    plus4_log = log_open("Plus4");

    if (mem_load() < 0) {
        return -1;
    }

    event_init();

    /* Setup trap handling.  */
    traps_init();

    gfxoutput_init();

#ifdef HAVE_MOUSE
    /* Initialize mouse support (if present).  */
    mouse_init();
#endif

    /* Initialize serial traps.  */
    if (serial_init(plus4_serial_traps) < 0) {
        return -1;
    }

    serial_trap_init(0xa8);
    serial_iec_bus_init();

    rs232drv_init();

    /* Initialize print devices.  */
    printer_init();

    /* Initialize the tape emulation.  */
    tape_init(&tapeinit);

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    disk_image_init();

    /* Initialize autostart.  */
    resources_get_int("AutostartDelay", &delay);
    if (delay == 0) {
        delay = 2; /* default */
    }
    autostart_init((CLOCK)(delay * PLUS4_PAL_RFSH_PER_SEC * PLUS4_PAL_CYCLES_PER_RFSH), 1, 0, 0xc8, 0xca, -40);

    /* Initialize the sidcart first */
    sidcart_sound_chip_init();

    /* Initialize native sound chip */
    ted_sound_chip_init();

    /* Initialize cartridge based sound chips */
    digiblaster_sound_chip_init();
    speech_sound_chip_init();

    /* Initialize userport based sound chips */
    userport_dac_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

#ifdef USE_BEOS_UI
    /* Pre-init Plus4-specific parts of the menus before ted_init()
       creates a canvas window with a menubar at the top. This could
       also be used by other ports, e.g. GTK+...  */
    plus4ui_init_early();
#endif

    if (ted_init() == NULL) {
        return -1;
    }

    acia_init();

#ifndef COMMON_KBD
    if (plus4_kbd_init() < 0) {
        return -1;
    }
#endif

    plus4_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
                                machine_timing.cycles_per_sec);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));

    if (!console_mode) {
        plus4ui_init();
    }

    if (!video_disabled_mode) {
        joystick_init();
    }

    cs256k_init();

    h256k_init();

    plus4iec_init();

    machine_drive_stub();

    /* Initialize the machine specific I/O */
    plus4io_init();

#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline */
        int fs;
        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_set_int("TEDFullscreen", 1);
        }
    }
#endif
    return 0;
}
Exemplo n.º 2
0
/* Plus4-specific initialization.  */
int machine_specific_init(void)
{
    int delay;

    plus4_log = log_open("Plus4");

    if (mem_load() < 0)
        return -1;

    /* Setup trap handling.  */
    traps_init();

    /* Initialize serial traps.  */
    if (serial_init(plus4_serial_traps) < 0)
        return -1;

    serial_trap_init(0xa8);
    serial_iec_bus_init();

    rs232drv_init();

    /* Initialize print devices.  */
    printer_init();

    /* Initialize the tape emulation.  */
    tape_init(&tapeinit);

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    /* Initialize autostart.  */
    resources_get_int("AutostartDelay", &delay);
    if (delay == 0) {
        delay = 2; /* default */
    }
    autostart_init((CLOCK)(delay * PLUS4_PAL_RFSH_PER_SEC
                   * PLUS4_PAL_CYCLES_PER_RFSH), 0, 0, 0xc8, 0xca, -40);

    /* Initialize the sidcart first */
    sidcart_sound_chip_init();

    /* Initialize native sound chip */
    ted_sound_chip_init();

    /* Initialize cartridge based sound chips */
    digiblaster_sound_chip_init();
    speech_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    if (ted_init() == NULL) {
        return -1;
    }

    acia_init();

#ifndef COMMON_KBD
    if (plus4_kbd_init() < 0) {
        return -1;
    }
#endif

    plus4_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
                                machine_timing.cycles_per_sec);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec
                * machine_timing.cycles_per_rfsh));

    plus4ui_init();

    cs256k_init();

    h256k_init();

    plus4iec_init();

    machine_drive_stub();

#if defined (USE_XF86_EXTENSIONS) && \
    (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline */
        int fs;
        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_set_int("TEDFullscreen", 1);
        }
    }
#endif
    return 0;
}
Exemplo n.º 3
0
/* Plus4-specific initialization.  */
int machine_specific_init(void)
{
    plus4_log = log_open("Plus4");

    if (mem_load() < 0)
        return -1;

    /* Setup trap handling.  */
    traps_init();

    /* Initialize serial traps.  */
    if (serial_init(plus4_serial_traps) < 0)
        return -1;

    serial_trap_init(0xa8);
    serial_iec_bus_init();

    rs232drv_init();

    /* Initialize print devices.  */
    printer_init();

    /* Initialize the tape emulation.  */
    tape_init(&tapeinit);

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    /* Initialize autostart.  */
    autostart_init((CLOCK)(2 * PLUS4_PAL_RFSH_PER_SEC
                   * PLUS4_PAL_CYCLES_PER_RFSH), 0, 0, 0xc8, 0xca, -40);

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    if (ted_init() == NULL)
        return -1;

    acia_init();

#ifndef COMMON_KBD
    if (plus4_kbd_init() < 0)
        return -1;
#endif

    plus4_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
                                machine_timing.cycles_per_sec);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec
                * machine_timing.cycles_per_rfsh));

    plus4ui_init();

    cs256k_init();

    h256k_init();

    plus4iec_init();

    machine_drive_stub();

    return 0;
}