/*
* keypad controller should be initialized in the following sequence
* only, otherwise it might get into FSM stuck state.
*
* - Initialize keypad control parameters, like no. of rows, columns,
* timing values etc.,
* - configure rows and column gpios pull up/down.
* - set irq edge type.
* - enable the keypad controller.
*/
static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
{
const struct pm8xxx_keypad_platform_data *pdata =
dev_get_platdata(&pdev->dev);
const struct matrix_keymap_data *keymap_data;
struct pmic8xxx_kp *kp;
int rc;
u8 ctrl_val;
struct pm_gpio kypd_drv = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = PM_GPIO_VIN_S4,
.out_strength = PM_GPIO_STRENGTH_LOW,
.function = PM_GPIO_FUNC_1,
.inv_int_pol = 1,
};
struct pm_gpio kypd_sns = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = PM_GPIO_VIN_S4,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 1,
};
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > PM8XXX_MAX_COLS ||
pdata->num_rows > PM8XXX_MAX_ROWS ||
pdata->num_cols < PM8XXX_MIN_COLS) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms ||
pdata->scan_delay_ms > MAX_SCAN_DELAY ||
pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
if (!pdata->row_hold_ns ||
pdata->row_hold_ns > MAX_ROW_HOLD_DELAY ||
pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
return -EINVAL;
}
if (!pdata->debounce_ms ||
((pdata->debounce_ms % 5) != 0) ||
pdata->debounce_ms > MAX_DEBOUNCE_TIME ||
pdata->debounce_ms < MIN_DEBOUNCE_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
keymap_data = pdata->keymap_data;
if (!keymap_data) {
dev_err(&pdev->dev, "no keymap data supplied\n");
return -EINVAL;
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->input->name = pdata->input_name ? : "PMIC8XXX keypad";
kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_I2C;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = kp->keycodes;
kp->input->keycodemax = PM8XXX_MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(kp->keycodes);
kp->input->open = pmic8xxx_kp_open;
kp->input->close = pmic8xxx_kp_close;
matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT,
kp->input->keycode, kp->input->keybit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
/* initialize keypad state */
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
rc = pmic8xxx_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_get_irq;
}
rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start,
pdata->num_cols, kp, &kypd_sns);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pmic8xxx_kp_config_gpio(pdata->rows_gpio_start,
pdata->num_rows, kp, &kypd_drv);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_get_irq;
}
rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
if (rc < 0) {
dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
goto err_pmic_reg_read;
}
kp->ctrl_reg = ctrl_val;
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_pmic_reg_read;
}
device_init_wakeup(&pdev->dev, pdata->wakeup);
#if defined(CONFIG_MACH_KS02)
/*sysfs*/
kp->sec_keypad = device_create(sec_class, NULL, 0, kp, "sec_keypad");
if (IS_ERR(kp->sec_keypad))
dev_err(&pdev->dev, "Failed to create sec_key device\n");
rc = sysfs_create_group(&kp->sec_keypad->kobj, &key_attr_group);
if (rc) {
dev_err(&pdev->dev, "Failed to create the test sysfs: %d\n",
rc);
}
#endif
return 0;
err_pmic_reg_read:
free_irq(kp->key_stuck_irq, kp);
err_req_stuck_irq:
free_irq(kp->key_sense_irq, kp);
err_gpio_config:
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
platform_set_drvdata(pdev, NULL);
kfree(kp);
return rc;
}
static int __devexit pmic8xxx_kp_remove(struct platform_device *pdev)
{
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
free_irq(kp->key_stuck_irq, kp);
free_irq(kp->key_sense_irq, kp);
input_unregister_device(kp->input);
kfree(kp);
platform_set_drvdata(pdev, NULL);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int pmic8xxx_kp_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
struct input_dev *input_dev = kp->input;
if (device_may_wakeup(dev)) {
enable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&input_dev->mutex);
if (input_dev->users)
pmic8xxx_kp_disable(kp);
mutex_unlock(&input_dev->mutex);
}
key_suspend = 1;
return 0;
}
static int pmic8xxx_kp_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
struct input_dev *input_dev = kp->input;
if (device_may_wakeup(dev)) {
disable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&input_dev->mutex);
if (input_dev->users)
pmic8xxx_kp_enable(kp);
mutex_unlock(&input_dev->mutex);
}
key_suspend = 0;
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
pmic8xxx_kp_suspend, pmic8xxx_kp_resume);
static struct platform_driver pmic8xxx_kp_driver = {
.probe = pmic8xxx_kp_probe,
.remove = __devexit_p(pmic8xxx_kp_remove),
.driver = {
.name = PM8XXX_KEYPAD_DEV_NAME,
.owner = THIS_MODULE,
.pm = &pm8xxx_kp_pm_ops,
},
};
module_platform_driver(pmic8xxx_kp_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PMIC8XXX keypad driver");
MODULE_VERSION("1.0");
MODULE_ALIAS("platform:pmic8xxx_keypad");
MODULE_AUTHOR("Trilok Soni <*****@*****.**>");
static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
{
const struct pm8xxx_keypad_platform_data *pdata =
dev_get_platdata(&pdev->dev);
const struct matrix_keymap_data *keymap_data;
struct pmic8xxx_kp *kp;
int rc;
u8 ctrl_val;
struct device *sec_key;
struct pm_gpio kypd_drv = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = PM_GPIO_VIN_S4,
.out_strength = PM_GPIO_STRENGTH_LOW,
.function = PM_GPIO_FUNC_1,
.inv_int_pol = 1,
};
struct pm_gpio kypd_sns = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = PM_GPIO_VIN_S4,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 1,
};
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > PM8XXX_MAX_COLS ||
pdata->num_rows > PM8XXX_MAX_ROWS ||
pdata->num_cols < PM8XXX_MIN_COLS) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms ||
pdata->scan_delay_ms > MAX_SCAN_DELAY ||
pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
if (!pdata->row_hold_ns ||
pdata->row_hold_ns > MAX_ROW_HOLD_DELAY ||
pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
return -EINVAL;
}
if (!pdata->debounce_ms ||
((pdata->debounce_ms % 5) != 0) ||
pdata->debounce_ms > MAX_DEBOUNCE_TIME ||
pdata->debounce_ms < MIN_DEBOUNCE_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
keymap_data = pdata->keymap_data;
if (!keymap_data) {
dev_err(&pdev->dev, "no keymap data supplied\n");
return -EINVAL;
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->input->name = pdata->input_name ? : "PMIC8XXX keypad";
kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_I2C;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = kp->keycodes;
kp->input->keycodemax = PM8XXX_MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(kp->keycodes);
kp->input->open = pmic8xxx_kp_open;
kp->input->close = pmic8xxx_kp_close;
matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT,
kp->input->keycode, kp->input->keybit);
get_volumekey_matrix(keymap_data,
&volup_matrix, &voldown_matrix);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
/* initialize keypad state */
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
rc = pmic8xxx_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_get_irq;
}
rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start,
pdata->num_cols, kp, &kypd_sns);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pmic8xxx_kp_config_gpio(pdata->rows_gpio_start,
pdata->num_rows, kp, &kypd_drv);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_get_irq;
}
rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
if (rc < 0) {
dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
goto err_pmic_reg_read;
}
rc = request_threaded_irq(MSM_GPIO_KEY_VOLUP_IRQ ,
NULL, pmic8058_volume_up_irq, IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING, "vol_up", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request vol_up irq\n");
goto err_req_sense_irq;
}
rc = request_threaded_irq(MSM_GPIO_KEY_VOLDOWN_IRQ ,
NULL, pmic8058_volume_down_irq, IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING, "vol_down", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request vol_down irq\n");
goto err_req_sense_irq;
}
kp->ctrl_reg = ctrl_val;
#if defined CONFIG_MACH_VITAL2REFRESH
gpio_tlmm_config(GPIO_CFG(MSM_HALL_IC, 1, GPIO_CFG_INPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
input_set_capability(kp->input, EV_SW, SW_LID);
if (gpio_get_value(MSM_HALL_IC)) {
input_report_switch(kp->input, SW_LID, 1);
}
else {
input_report_switch(kp->input, SW_LID, 0);
}
input_sync(kp->input);
printk(KERN_INFO "[input_report_switch] slide_int - !gpio_hall_ic %s\n",
gpio_get_value(MSM_HALL_IC) == 0 ? "OPEN" : "CLOSE");
rc = request_threaded_irq(MSM_GPIO_TO_INT(MSM_HALL_IC), NULL,
hall_ic_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"hall_ic", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request hall_ic irq\n");
goto err_hall_ic_irq;
}
#endif
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_pmic_reg_read;
}
sec_key = device_create(sec_class, NULL, 0, NULL, "sec_key");
if (IS_ERR(sec_key))
pr_err("Failed to create device(sec_key)!\n");
rc = device_create_file(sec_key, &dev_attr_sec_key_pressed);
if (rc) {
pr_err("Failed to create device file - pressed(%s), err(%d)!\n",
dev_attr_sec_key_pressed.attr.name, rc);
}
dev_set_drvdata(sec_key, kp);
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_pmic_reg_read:
free_irq(kp->key_stuck_irq, kp);
err_req_stuck_irq:
free_irq(kp->key_sense_irq, kp);
#if defined CONFIG_MACH_VITAL2REFRESH
err_hall_ic_irq:
#endif
err_req_sense_irq:
err_gpio_config:
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
platform_set_drvdata(pdev, NULL);
kfree(kp);
return rc;
}
static int __devexit pmic8xxx_kp_remove(struct platform_device *pdev)
{
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
free_irq(kp->key_stuck_irq, kp);
free_irq(kp->key_sense_irq, kp);
input_unregister_device(kp->input);
kfree(kp);
platform_set_drvdata(pdev, NULL);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int pmic8xxx_kp_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
struct input_dev *input_dev = kp->input;
if (device_may_wakeup(dev)) {
enable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&input_dev->mutex);
#if defined CONFIG_MACH_VITAL2REFRESH
enable_irq_wake(MSM_GPIO_TO_INT(MSM_HALL_IC));
/* to wakeup in case of sleep */
#endif
if (input_dev->users)
pmic8xxx_kp_disable(kp);
mutex_unlock(&input_dev->mutex);
}
return 0;
}
static int pmic8xxx_kp_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
struct input_dev *input_dev = kp->input;
if (device_may_wakeup(dev)) {
disable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&input_dev->mutex);
#if defined CONFIG_MACH_VITAL2REFRESH
disable_irq_wake(MSM_GPIO_TO_INT(MSM_HALL_IC)); /* to match irq pair */
#endif
if (input_dev->users)
pmic8xxx_kp_enable(kp);
mutex_unlock(&input_dev->mutex);
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
pmic8xxx_kp_suspend, pmic8xxx_kp_resume);
static struct platform_driver pmic8xxx_kp_driver = {
.probe = pmic8xxx_kp_probe,
.remove = __devexit_p(pmic8xxx_kp_remove),
.driver = {
.name = PM8XXX_KEYPAD_DEV_NAME,
.owner = THIS_MODULE,
.pm = &pm8xxx_kp_pm_ops,
},
};
static int __init pmic8xxx_kp_init(void)
{
return platform_driver_register(&pmic8xxx_kp_driver);
}
module_init(pmic8xxx_kp_init);
static void __exit pmic8xxx_kp_exit(void)
{
platform_driver_unregister(&pmic8xxx_kp_driver);
}
module_exit(pmic8xxx_kp_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PMIC8XXX keypad driver");
MODULE_VERSION("1.0");
MODULE_ALIAS("platform:pmic8xxx_keypad");
MODULE_AUTHOR("Trilok Soni <*****@*****.**>");