Exemplo n.º 1
0
/**
 * Acquires the lock over threading subsystem.
 * 
 * The lock blocks new thread creation and thread exit operations. 
 */
IDATA VMCALL hythread_global_lock() {
    IDATA status;
    hythread_t self = hythread_self();

    // we need not care about suspension if the thread
    // is not even attached to hythread
    if (self == NULL) {
        return port_mutex_lock(&TM_LIBRARY->TM_LOCK);
    }

    // disable_count must be 0 on potentially
    // blocking operation to prevent suspension deadlocks,
    // meaning that the thread is safe for suspension
    assert(hythread_is_suspend_enabled());

    status = port_mutex_lock(&TM_LIBRARY->TM_LOCK);
    assert(status == TM_ERROR_NONE);

    // make sure we do not get a global thread lock
    // while being requested to suspend
    while (self->suspend_count) {
        // give up global thread lock before safepoint,
        // because this thread can be suspended at a safepoint
        status = port_mutex_unlock(&TM_LIBRARY->TM_LOCK);
        assert(status == TM_ERROR_NONE);
        hythread_safe_point();
        status = port_mutex_lock(&TM_LIBRARY->TM_LOCK);
        assert(status == TM_ERROR_NONE);
    }
    return TM_ERROR_NONE;
}
Exemplo n.º 2
0
void EBProfileCollector::onTimeout() {
    assert(mode == EB_PCMODE_ASYNC);
    if(!newProfiles.empty()) {
        port_mutex_lock(&profilesLock);
        greenProfiles.insert(greenProfiles.end(), newProfiles.begin(), newProfiles.end());
        newProfiles.clear();
        port_mutex_unlock(&profilesLock);
    }

    if (!unloadedMethodProfiles.empty()) {
        cleanUnloadedProfiles(true);
    }

    for (EBProfiles::iterator it = greenProfiles.begin(), end = greenProfiles.end(); it!=end; ++it) {
        EBMethodProfile* profile = *it;
        if (profile->entryCounter >= eThreshold || profile->backedgeCounter >= bThreshold) {
            tmpProfiles.push_back(profile);
            *it = NULL;
        }
    }
    if (!tmpProfiles.empty()) {
        port_mutex_lock(&profilesLock);
        std::remove(greenProfiles.begin(), greenProfiles.end(), (EBMethodProfile*)NULL);
        greenProfiles.resize(greenProfiles.size() - tmpProfiles.size());
        port_mutex_unlock(&profilesLock);
        for (EBProfiles::iterator it = tmpProfiles.begin(), end = tmpProfiles.end(); it!=end; ++it) {
            EBMethodProfile* profile = *it;
            if (loggingEnabled) {
                logReadyProfile(catName, name, profile);
            }
            em->methodProfileIsReady(profile);
        }
        tmpProfiles.clear();
    }
}
Exemplo n.º 3
0
IDATA VMCALL hythread_set_state(hythread_t thread, IDATA state) {
    assert(thread);
    port_mutex_lock(&thread->mutex);
    thread->state = state;
    port_mutex_unlock(&thread->mutex);
    return TM_ERROR_NONE;
} // hythread_set_state
Exemplo n.º 4
0
/**
 * Initializes raw monitor. 
 *
 * Raw monitors are a simple combination of mutex and conditional variable which is 
 * not associated with any Java object. This function creates the raw monitor at the 
 * address specified as mon_ptr. 
 * User needs to allocate space equal to sizeof(jrawMonitorID) before doing this call.
 *
 * @param[in] mon_ptr address where monitor needs to be created and initialized.
 */
IDATA VMCALL jthread_raw_monitor_create(jrawMonitorID * mon_ptr)
{
    assert(mon_ptr);

    hythread_monitor_t monitor;
    IDATA status = hythread_monitor_init(&monitor, 0);
    if (status != TM_ERROR_NONE) {
        return status;
    }

    // possibly should be moved to jvmti(environment?) init section
    if (!jvmti_monitor_table) {
        status = jthread_init_jvmti_monitor_table();
        if (status != TM_ERROR_NONE) {
            return status;
        }
    }

    status = port_mutex_lock(&jvmti_monitor_table_lock);
    if (status != TM_ERROR_NONE) {
        return status;
    }
    *mon_ptr = (jrawMonitorID)array_add(jvmti_monitor_table, monitor);
    if (!(*mon_ptr)) {
        port_mutex_unlock(&jvmti_monitor_table_lock);
        return TM_ERROR_OUT_OF_MEMORY;
    }

    status = port_mutex_unlock(&jvmti_monitor_table_lock);
    return status;
} // jthread_raw_monitor_create
Exemplo n.º 5
0
IDATA VMCALL hythread_wait_for_nondaemon_threads(hythread_t thread, IDATA threads_to_keep)
{
    IDATA status;
    hythread_library_t lib;

    assert(thread);
    lib = thread->library;

    status = port_mutex_lock(&lib->TM_LOCK);
    if (status != TM_ERROR_NONE) {
        return status;
    }

    while (lib->nondaemon_thread_count - threads_to_keep > 0)
    {
        // check interruption and other problems
        status = hycond_wait(&lib->nondaemon_thread_cond, &lib->TM_LOCK);

        CTRACE(("TM wait for nondaemons notified, count: %d",
               lib->nondaemon_thread_count));

        if (status != TM_ERROR_NONE) {
            port_mutex_unlock(&lib->TM_LOCK);
            return status;
        }
    }

    status = port_mutex_unlock(&lib->TM_LOCK);
    return status;
} // hythread_wait_for_nondaemon_threads
Exemplo n.º 6
0
IDATA VMCALL hythread_decrease_nondaemon_threads_count(hythread_t thread, IDATA threads_to_keep)
{
    hythread_library_t lib = thread->library;
    IDATA status = port_mutex_lock(&lib->TM_LOCK);
    if (status != TM_ERROR_NONE) {
        return status;
    }

    if (lib->nondaemon_thread_count <= 0) {
        status = port_mutex_unlock(&lib->TM_LOCK);
        if (status != TM_ERROR_NONE) {
            return status;
        }
        return TM_ERROR_ILLEGAL_STATE;
    }

    CTRACE(("TM: nondaemons decreased, thread: %p count: %d\n", thread,
           lib->nondaemon_thread_count));

    lib->nondaemon_thread_count--;
    if (lib->nondaemon_thread_count - threads_to_keep <= 0) {
        status = hycond_notify_all(&lib->nondaemon_thread_cond);
        CTRACE(("TM: nondaemons all dead, thread: %p count: %d\n", thread,
               lib->nondaemon_thread_count));
        if (status != TM_ERROR_NONE) {
            port_mutex_unlock(&lib->TM_LOCK);
            return status;
        }
    }

    status = port_mutex_unlock(&lib->TM_LOCK);
    return status;
} // hythread_countdown_nondaemon_threads
Exemplo n.º 7
0
/**
 * Acquires global lock of the library associated with the current thread.
 *
 * @param[in] self current thread
 */
void VMCALL hythread_lib_lock(hythread_t self) {
    IDATA status;
    
    assert(self == hythread_self());
    status = port_mutex_lock(&self->library->TM_LOCK);
    assert(status == TM_ERROR_NONE);
}
Exemplo n.º 8
0
IDATA VMCALL hythread_get_state(hythread_t thread) {
    IDATA state;
    assert(thread);
    port_mutex_lock(&thread->mutex);
    state = thread->state;
    port_mutex_unlock(&thread->mutex);
    return state;
} // hythread_get_state
Exemplo n.º 9
0
MethodProfile* EBProfileCollector::getMethodProfile(Method_Handle mh) const {
    port_mutex_lock(&profilesLock);
    MethodProfile* res = NULL;
    EBProfilesMap::const_iterator it = profilesByMethod.find(mh);
    if (it != profilesByMethod.end()) {
        res = it->second;
    }
    port_mutex_unlock(&profilesLock);
    return res;
}
Exemplo n.º 10
0
/**
 * Sets the count for latch to the specific value.
 *
 * @param[in] latch the latch 
 * @param[in] count new count value
 */
IDATA VMCALL hylatch_set(hylatch_t latch, IDATA count) {
    IDATA status;
    
    status = port_mutex_lock(&latch->mutex);
    if (status != TM_ERROR_NONE) return status;
    latch->count = count;
    status = port_mutex_unlock(&latch->mutex);
    if (status != TM_ERROR_NONE) return status;

    return TM_ERROR_NONE;       
}
Exemplo n.º 11
0
IDATA VMCALL hythread_increase_nondaemon_threads_count(hythread_t thread)
{
    hythread_library_t lib = thread->library;
    IDATA status = port_mutex_lock(&lib->TM_LOCK);
    if (status != TM_ERROR_NONE) {
        return status;
    }
    lib->nondaemon_thread_count++;
    status = port_mutex_unlock(&lib->TM_LOCK);
    return status;
} // hythread_increase_nondaemon_threads_count_in_library
Exemplo n.º 12
0
/**
 * Returns the count for this latch.
 *
 * The count value for the latch determines how many times it needs to be counted down
 * before the threads awaiting on the latch can be unblocked.
 * @param[out] count count value
 * @param[in] latch the latch 
 */
IDATA VMCALL hylatch_get_count(IDATA *count, hylatch_t latch) {
    IDATA status;
    
    status = port_mutex_lock(&latch->mutex);
    if (status != TM_ERROR_NONE) return status;
    *count = latch->count;
    status = port_mutex_unlock(&latch->mutex);
    if (status != TM_ERROR_NONE) return status;

    return TM_ERROR_NONE;       
}
Exemplo n.º 13
0
/**
 * waits on a condition variable, directly using OS interfaces.
 *
 * This function does not implement interruptability and thread state
 * functionality, thus the caller of this function have to handle it.
 */
int os_cond_timedwait(hycond_t *cond, osmutex_t *mutex, I_64 ms, IDATA nano)
{
    int r = 0;
    struct waiting_node node;
    DWORD res;
    DWORD timeout;
    if (!ms && !nano) {
        timeout = INFINITE;
    } else {
        timeout = (DWORD)ms + (nano ? 1:0);
    }

    // NULL attributes, manual reset, initially unsignalled, NULL name
    node.event = CreateEvent(NULL, TRUE, FALSE, NULL);
    port_mutex_lock(&cond->queue_mutex);
    _enqueue(cond, &node);
    port_mutex_unlock(&cond->queue_mutex);

    // release mutex and wait for signal
    port_mutex_unlock(mutex);

    res = WaitForSingleObject(node.event, timeout);
    if (res != WAIT_OBJECT_0) {
        if (res == WAIT_TIMEOUT)
            r = TM_ERROR_TIMEOUT;
        else
            r = (int)GetLastError();
    }

    // re-acquire mutex associated with condition variable
    port_mutex_lock(mutex);

    port_mutex_lock(&cond->queue_mutex);
    _remove_from_queue(cond, &node);
    CloseHandle(node.event);
    port_mutex_unlock(&cond->queue_mutex);

    return r;
}
Exemplo n.º 14
0
void EBProfileCollector::classloaderUnloadingCallback(Class_Loader_Handle h) {
    port_mutex_lock(&profilesLock);
    
    //can't modify profiles map in async mode here -> it could be iterated by the checker thread without lock
    bool erase = mode != EB_PCMODE_ASYNC;
    addProfilesForClassloader(h, greenProfiles, unloadedMethodProfiles, erase);
    addProfilesForClassloader(h, newProfiles, unloadedMethodProfiles, erase);
    
    if (erase) {
        cleanUnloadedProfiles(false);
    }

    port_mutex_unlock(&profilesLock);
}
Exemplo n.º 15
0
/**
 * Enter a monitor.
 *
 * A thread may re-enter a monitor it owns multiple times, but must
 * exit the monitor the same number of times before any other thread
 * wanting to enter the monitor is permitted to continue.
 *
 * @param[in] mon_ptr a monitor to be entered
 * @return 0 on success<br>
 * HYTHREAD_PRIORITY_INTERRUPTED if the thread was priority interrupted while blocked
 *
 * @see hythread_monitor_enter_using_threadId, hythread_monitor_exit, hythread_monitor_exit_using_threadId
 */
IDATA VMCALL hythread_monitor_enter(hythread_monitor_t mon_ptr) {
    IDATA status;
    hythread_t  self = tm_self_tls;
    if (mon_ptr->owner != self) {
        status = port_mutex_lock(&mon_ptr->mutex);
        mon_ptr->owner = self;
        assert(status == TM_ERROR_NONE);
    } else {
        assert(mon_ptr->recursion_count >=0);
        mon_ptr->recursion_count++;
        status = TM_ERROR_NONE;
    }
    return status;
}
Exemplo n.º 16
0
/**
 * Signals all threads blocking on the given condition variable.
 *
 * @param[in] cond the condition variable on which to produce the broadcast.
 * @sa apr_thread_cond_broadcast()
 */
IDATA VMCALL hycond_notify_all (hycond_t *cond) {
    int r = 0;
    DWORD res;
    struct waiting_node *node;

    port_mutex_lock(&cond->queue_mutex);
    for (node = _dequeue(cond); node != NULL; node = _dequeue(cond)) {
        res = SetEvent(node->event);
        if (res == 0) {
            r = GetLastError();
        }
    }
    port_mutex_unlock(&cond->queue_mutex);
    return r;
}
Exemplo n.º 17
0
EBMethodProfile* EBProfileCollector::createProfile(Method_Handle mh) {
    EBMethodProfile* profile = new EBMethodProfile(this, mh);

    port_mutex_lock(&profilesLock);

    assert(profilesByMethod.find(mh) == profilesByMethod.end());
    profilesByMethod[mh] = profile;
    if (mode == EB_PCMODE_ASYNC) {
        //can't modify profiles map -> it could be iterated by the checker thread without lock
        newProfiles.push_back(profile);
    }

    port_mutex_unlock(&profilesLock);

    return profile;
}
Exemplo n.º 18
0
/*
 * Exit locktable write section
 */
static void locktable_writer_exit() {
    IDATA status = port_mutex_lock(&lock_table->mutex);
    assert(status == TM_ERROR_NONE);

    if (lock_table->readers_reading > 0) {
        lock_table->readers_reading = lock_table->readers_waiting;
        lock_table->readers_waiting = 0;
        lock_table->state = HYTHREAD_LOCKTABLE_READING;
        hycond_notify_all(&lock_table->read);
    } else if (lock_table->writers_waiting > 0) {
        hycond_notify(&lock_table->write);
    } else {
        lock_table->state = HYTHREAD_LOCKTABLE_IDLE;
    }

    status = port_mutex_unlock(&lock_table->mutex);
    assert(status == TM_ERROR_NONE);
}
Exemplo n.º 19
0
/*
 * Enter locktable write section
 */
static void locktable_writer_enter() {
    IDATA status = port_mutex_lock(&lock_table->mutex);
    assert(status == TM_ERROR_NONE);

    if (lock_table->state != HYTHREAD_LOCKTABLE_IDLE) {
        lock_table->writers_waiting++;
        hycond_wait_timed_raw(&lock_table->write, &lock_table->mutex, 0, 0);

        // We are asserting here that we exited wait with the correct state
        assert(lock_table->state == HYTHREAD_LOCKTABLE_WRITING);

        lock_table->writers_waiting--;
    } else {
        lock_table->state = HYTHREAD_LOCKTABLE_WRITING;
    }        

    status = port_mutex_unlock(&lock_table->mutex);
    assert(status == TM_ERROR_NONE);
}
Exemplo n.º 20
0
//wait method implementation
////
static IDATA latch_wait_impl(hylatch_t latch, I_64 ms, IDATA nano, IDATA interruptable) {
    IDATA status;
        
    status = port_mutex_lock(&latch->mutex);
    if (status != TM_ERROR_NONE) {
        return status;
    }
    while (latch->count) {
        status = condvar_wait_impl(&latch->condition, &latch->mutex, ms, nano, interruptable);
        //check interruption and other problems
        if (status != TM_ERROR_NONE) {
            port_mutex_unlock(&latch->mutex);
            return status;
        }

        if (ms || nano) break;
    }
    status = port_mutex_unlock(&latch->mutex);

    return status;
}
Exemplo n.º 21
0
void sig_process_crash_flags_change(unsigned added, unsigned removed)
{
    apr_status_t aprarr = port_mutex_lock(&g_mutex);
    if (aprarr != APR_SUCCESS)
        return;

    if ((added & PORT_CRASH_CALL_DEBUGGER) != 0 && asserts_disabled)
    {
        restore_assert_dialogs();
        asserts_disabled = false;
        signal(SIGABRT, (sigh_t)final_sigabrt_handler);
    }

    if ((removed & PORT_CRASH_CALL_DEBUGGER) != 0 && !asserts_disabled)
    {
        disable_assert_dialogs();
        asserts_disabled = true;
        signal(SIGABRT, (sigh_t)sigabrt_handler);
    }

    port_mutex_unlock(&g_mutex);
}
Exemplo n.º 22
0
/**
 * Decreases the count for latch.
 *
 * If the count reaches zero, all threads awaiting on the latch are unblocked.
 * @param[in] latch the latch 
 * @sa java.util.concurrent.CountDownLatch.countDown()
 */
IDATA VMCALL hylatch_count_down(hylatch_t latch) {
    IDATA status;
    
    status = port_mutex_lock(&latch->mutex);
    if (status != TM_ERROR_NONE) return status;
    if (latch->count <= 0) {
        status = port_mutex_unlock(&latch->mutex);
        if (status != TM_ERROR_NONE) return status;
        return TM_ERROR_ILLEGAL_STATE;
    }
    latch->count--;
    if (latch->count == 0) {
        status = hycond_notify_all(&latch->condition); 
        if (status != TM_ERROR_NONE) {
            port_mutex_unlock(&latch->mutex);
            return status;
        }
    }
            
    status = port_mutex_unlock(&latch->mutex);
    if (status != TM_ERROR_NONE) return status;
        
    return TM_ERROR_NONE;       
}
Exemplo n.º 23
0
/**
 * Destroys raw monitor. 
 *
 * @param[in] mon_ptr address where monitor needs to be destroyed.
 */
IDATA VMCALL jthread_raw_monitor_destroy(jrawMonitorID mon_ptr)
{
    hythread_monitor_t monitor =
         (hythread_monitor_t)array_get(jvmti_monitor_table, (UDATA)mon_ptr);
    if (!monitor) {
        return TM_ERROR_INVALID_MONITOR;
    }

    while (hythread_monitor_destroy((hythread_monitor_t)monitor) != TM_ERROR_NONE)
    {
        IDATA status = hythread_monitor_exit((hythread_monitor_t) monitor);
        if (status != TM_ERROR_NONE) {
            return status;
        }
    }

    IDATA status = port_mutex_lock(&jvmti_monitor_table_lock);
    if (status != TM_ERROR_NONE) {
        return status;
    }
    array_delete(jvmti_monitor_table, (UDATA) mon_ptr);
    status = port_mutex_unlock(&jvmti_monitor_table_lock);
    return status;
} // jthread_raw_monitor_destroy
Exemplo n.º 24
0
IDATA acquire_start_lock() {
    return port_mutex_lock(&TM_START_LOCK);
}
Exemplo n.º 25
0
IDATA monitor_wait_impl(hythread_monitor_t mon_ptr, I_64 ms, IDATA nano, IDATA interruptable) {
    IDATA status;
    int saved_recursion;
    //int saved_disable_count;
    hythread_t self = tm_self_tls;
    if (mon_ptr->owner != self) {
        return TM_ERROR_ILLEGAL_STATE;
    }

    saved_recursion = mon_ptr->recursion_count;

    assert(saved_recursion>=0);

    mon_ptr->owner = NULL;
    mon_ptr->recursion_count =0;
    mon_ptr->wait_count++;
    port_mutex_lock(&self->mutex);
    self->state |= TM_THREAD_STATE_IN_MONITOR_WAIT;
    self->waited_monitor = mon_ptr;
    port_mutex_unlock(&self->mutex);

    do {
        apr_time_t start;
        assert(mon_ptr->notify_count >= 0);
        assert(mon_ptr->notify_count < mon_ptr->wait_count);
        start = apr_time_now();
        status = condvar_wait_impl(&mon_ptr->condition, &mon_ptr->mutex, ms, nano, interruptable);
        if (status != TM_ERROR_NONE || mon_ptr->notify_count) {
            break;
        }
        // we should not change ms and nano if both are 0 (meaning "no timeout")
        if (ms || nano) {
            apr_interval_time_t elapsed;
            elapsed = apr_time_now() - start; // microseconds
            nano -= (IDATA)((elapsed % 1000) * 1000);
            if (nano < 0) {
                ms -= elapsed/1000 + 1;
                nano += 1000000;
            } else {
                ms -= elapsed/1000;
            }
            if (ms < 0) {
                assert(status == TM_ERROR_NONE);
                status = TM_ERROR_TIMEOUT;
                break;
            }
            assert(0 <= nano && nano < 1000000);
        }
    } while (1);

    // consume the notify_count unless we got an error (or were interrupted)
    if (mon_ptr->notify_count > 0
        && (status == TM_ERROR_NONE || mon_ptr->notify_count == mon_ptr->wait_count))
    {
        mon_ptr->notify_count--;
    }

    port_mutex_lock(&self->mutex);
    self->state &= ~TM_THREAD_STATE_IN_MONITOR_WAIT;
    self->waited_monitor = NULL;
    port_mutex_unlock(&self->mutex);

    mon_ptr->wait_count--;
    assert(mon_ptr->notify_count <= mon_ptr->wait_count);

    if (self->request) {
        int save_count;
        port_mutex_unlock(&mon_ptr->mutex);
        hythread_safe_point();
        hythread_exception_safe_point();
        save_count = hythread_reset_suspend_disable();
        port_mutex_lock(&mon_ptr->mutex);
        hythread_set_suspend_disable(save_count);
    }

    mon_ptr->recursion_count = saved_recursion;
    mon_ptr->owner = self;
    assert(mon_ptr->owner);
    return status;
}
Exemplo n.º 26
0
/**
 * Wrapper around user thread start proc.
 * Used to perform some duty jobs right after thread is started
 * and before thread is finished.
 */
static int HYTHREAD_PROC hythread_wrapper_start_proc(void *arg) {
    IDATA UNUSED status;
    hythread_t thread;
    hythread_start_proc_data start_proc_data;
    hythread_entrypoint_t start_proc;
    
    // store procedure arguments to local
    start_proc_data = *(hythread_start_proc_data_t) arg;
    free(arg);

    // get hythread global lock
    status = hythread_global_lock();
    assert(status == TM_ERROR_NONE);

    // get native thread
    thread = start_proc_data.thread;
    start_proc = start_proc_data.proc;

    CTRACE(("TM: native thread started: native: %p tm: %p",
        port_thread_current(), thread));

    // check hythread library state
    if (hythread_lib_state() != TM_LIBRARY_STATUS_INITIALIZED) {
        // set TERMINATED state
        port_mutex_lock(&thread->mutex);
        thread->state = TM_THREAD_STATE_TERMINATED;
        port_mutex_unlock(&thread->mutex);

        // set hythread_self()
        hythread_set_self(thread);
        assert(thread == hythread_self());

        // release thread structure data
        hythread_detach(thread);

        // zero hythread_self() because we don't do it in hythread_detach_ex()
        hythread_set_self(NULL);

        CTRACE(("TM: native thread terminated due to shutdown: native: %p tm: %p",
            port_thread_current(), thread));

        // release hythread global lock
        status = hythread_global_unlock();
        assert(status == TM_ERROR_NONE);

        return 0;
    }

    // register to group and set ALIVE & RUNNABLE states
    status = hythread_set_to_group(thread, start_proc_data.group);
    assert(status == TM_ERROR_NONE);

    // set hythread_self()
    hythread_set_self(thread);
    assert(thread == hythread_self());

    // set priority
    status = hythread_set_priority(thread, thread->priority);
    // FIXME - cannot set priority
    //assert(status == TM_ERROR_NONE);

    // release hythread global lock
    status = hythread_global_unlock();
    assert(status == TM_ERROR_NONE);

    // Do actual call of the thread body supplied by the user.
    start_proc(start_proc_data.proc_args);

    assert(hythread_is_suspend_enabled());

    // get hythread global lock
    status = hythread_global_lock();
    assert(status == TM_ERROR_NONE);

    // set TERMINATED state
    port_mutex_lock(&thread->mutex);
    thread->state = TM_THREAD_STATE_TERMINATED;
    port_mutex_unlock(&thread->mutex);

    // detach and free thread
    hythread_detach(thread);

    // release hythread global lock
    status = hythread_global_unlock();
    assert(status == TM_ERROR_NONE);

    return 0;
}
Exemplo n.º 27
0
/**
 * Initializes a new thread structure.
 */
IDATA VMCALL hythread_struct_init(hythread_t new_thread) 
{
    char jstatus;
    IDATA status;

    assert(new_thread);
    jstatus = new_thread->java_status;
    if (!new_thread->os_handle) {
        // new thread, create thread primitives
        memset(new_thread, 0, sizeof(HyThread));
        status = hysem_create(&new_thread->resume_event, 0, 1);
        assert(status == TM_ERROR_NONE);
        status = port_mutex_create(&new_thread->mutex, APR_THREAD_MUTEX_NESTED);
        assert(status == TM_ERROR_NONE);
        status = hythread_monitor_init(&new_thread->monitor, 0);
        assert(status == TM_ERROR_NONE);
    } else {
        // old thread, reset structure
        int result;
        hysem_t resume;
        osmutex_t mutex;
        hythread_monitor_t monitor;

        // release thread OS handle
        result = port_thread_free_handle(new_thread->os_handle);
        assert(0 == result);

        resume = new_thread->resume_event;
        mutex = new_thread->mutex;
        monitor = new_thread->monitor;

        // zero new thread
        memset(new_thread, 0, sizeof(HyThread));

        new_thread->resume_event = resume;
        new_thread->mutex = mutex;
        new_thread->monitor = monitor;
    }
    assert(new_thread->os_handle == 0);

    new_thread->java_status = jstatus;
    new_thread->priority   = HYTHREAD_PRIORITY_NORMAL;


#ifdef ORDER
    new_thread->alloc_count = 0;
    new_thread->thread_create_count = 0;
    new_thread->p_tid = 0;
    new_thread->p_count = 0;
//    new_thread->isInVMRegistry = 0;
#endif


    port_mutex_lock(&new_thread->mutex);
    new_thread->state = TM_THREAD_STATE_NEW;
    port_mutex_unlock(&new_thread->mutex);

    status = hysem_set(new_thread->resume_event, 0);
    assert(status == TM_ERROR_NONE);

    return TM_ERROR_NONE;
}
Exemplo n.º 28
0
IDATA VMCALL hythread_set_to_group(hythread_t thread, hythread_group_t group) {

#ifdef ORDER
    int map_id;
#endif

    IDATA status;
    hythread_t cur, prev;

    assert(thread);
    assert(group);

Retry_lock:    
    // Acquire global TM lock to prevent concurrent access to thread list
    status = hythread_global_lock();
    assert(status == TM_ERROR_NONE);

#ifdef ORDER
#ifdef ORDER_DEBUG
    printf("[TEST]: hythread mapping to object (%d, %d)\n", thread->p_tid, thread->p_count);
#endif
    if(hythread_vm_is_initializing || (thread->p_tid == 0 && thread->p_count == 0)){
    }
    else{
        if(hythread_get_IsRecord()){
#ifdef ORDER_DEBUG
            printf("[RECORD]: RECORD IN hythread_set_to_group!!!\n");
#endif
            threadRunOrderFile = fopen("THREAD_CREATE_ORDER.log", "a+");
#ifdef ORDER_DEBUG
            assert(threadRunOrderFile);
#endif
            fprintf(threadRunOrderFile, "%d %d\n", thread->p_tid, thread->p_count);
            fflush(threadRunOrderFile);
            fclose(threadRunOrderFile);
            threadRunOrderFile = NULL;
        }
        else{
//#ifdef ORDER_DEBUG
            printf("[REPLAY]: REPLAY IN hythread_set_to_group!!!\n");
//#endif
            if(threadRunOrderFile == NULL){
                threadRunOrderFile = fopen("THREAD_CREATE_ORDER.log", "r");
            }
#ifdef ORDER_DEBUG
            assert(threadRunOrderFile);
#endif
            if(p_tid == -1 && p_count == -1){
#ifdef ORDER_DEBUG
                if(feof(threadRunOrderFile)){
                    assert(0);
                }
#endif
                fscanf(threadRunOrderFile, "%d %d\n", &p_tid, &p_count);
            }

            if(p_tid == thread->p_tid && p_count == thread->p_count){
                p_tid = -1;
                p_count = -1;
            }
            else{
                IDATA status_temp = hythread_global_unlock();
                assert(status_temp == TM_ERROR_NONE);
//#ifdef ORDER_DEBUG
	       printf("[THREAD_CREATE]: This is not the correct order of thread create, pthread_self %d\n", pthread_self());
//#endif
                usleep(1000);
                hythread_yield();
				
                goto Retry_lock;
            }
        }
    }
#endif

    assert(thread->os_handle);
    
    if (!thread->thread_id) {
        char free_slot_found = 0;

        unsigned int i;
        for(i = 0; i < MAX_ID; i++) {
            // increase next_id to allow thread_id change 
            next_id++;
            if (next_id == MAX_ID) {
	            next_id = 1;
            }
            if (fast_thread_array[next_id] == NULL) {
                thread->thread_id = next_id;
	            free_slot_found = 1;


#ifdef ORDER

                {
                    char name[40];
                    FILE* thread_map = NULL;
                    int current_pthread_id = (int)thread->os_handle;

                    sprintf(name, "THREAD_MAP_WORKING_CLASSLIB.log");

                    thread_map = fopen(name, "a+");
#ifdef ORDER_DEBUG
                    assert(thread_map);
#endif

                    fwrite(&next_id, sizeof(int), 1, thread_map);
                    fwrite(&current_pthread_id, sizeof(int), 1, thread_map);

                    fflush(thread_map);
                    fclose(thread_map);
                }





//    printf("create thread id : %d\n", (int)new_thread->os_handle);
                for (map_id = 0 ; map_id < ORDER_THREAD_NUM ; map_id ++ )
                {
                   if (pthreadid_tid_mapping[map_id][0] == (int)thread->os_handle)
                   {
                       Thread_Map tmap;
                       tmap.thread_global_id = next_id;
                       tmap.pthread_id = (int)thread->os_handle;
                       tmap.thread_assigned_id = pthreadid_tid_mapping[map_id][1];
//                       if (threadMapFile == NULL)
                       threadMapFile = fopen("RECORD_THREAD_MAP.log", "a+");
                       fwrite((char *)&tmap, 1, sizeof(Thread_Map), threadMapFile);
                       fflush(threadMapFile);
                       fclose(threadMapFile);
                       threadMapFile = NULL;

#ifdef ORDER_DEBUG
                       printf("pthread id exists : %d\n", (int)pthreadid_tid_mapping[map_id][0]);
                       printf("tid mapping : %d -> %d\n",pthreadid_tid_mapping[map_id][0], pthreadid_tid_mapping[map_id][1]);
#endif

                       break;
                   }
                   else if (pthreadid_tid_mapping[map_id][0] == 0)
                   {
                       Thread_Map tmap;
                       tmap.thread_global_id = next_id;
                       tmap.pthread_id = (int)thread->os_handle;
                       tmap.thread_assigned_id = next_id;
//                       if (threadMapFile == NULL)
                       threadMapFile = fopen("RECORD_THREAD_MAP.log", "a+");
                       fwrite((char *)&tmap, 1, sizeof(Thread_Map), threadMapFile);
                       fflush(threadMapFile);
                       fclose(threadMapFile);
                       threadMapFile = NULL;

                       pthreadid_tid_mapping[map_id][0] = (int)(int)thread->os_handle;
                       pthreadid_tid_mapping[map_id][1] = next_id;

#ifdef ORDER_DEBUG
                       printf("new pthread id : %d\n", (int)pthreadid_tid_mapping[map_id][0]);
                       printf("tid mapping : %d -> %d\n", pthreadid_tid_mapping[map_id][0], pthreadid_tid_mapping[map_id][1]);
#endif

                       break;
                   }
                   if(i == (ORDER_THREAD_NUM - 1))
                   {
                       printf("[yzm]Error : Thread Map overflow!\n");
			  assert(0);
                       exit(0);
                   }
                }
#endif

                break;
            }
        }

        if (!free_slot_found) {
            status = hythread_global_unlock();
            assert(status == TM_ERROR_NONE);
            return TM_ERROR_OUT_OF_MEMORY;
        }
    }

    assert(thread->thread_id);
    fast_thread_array[thread->thread_id] = thread;

    thread->group = group;
    group->threads_count++;
    cur  = group->thread_list->next;
    prev = cur->prev;
    thread->next = cur;
    thread->prev = prev;
    prev->next = cur->prev = thread;

    port_mutex_lock(&thread->mutex);
    thread->state |= TM_THREAD_STATE_ALIVE | TM_THREAD_STATE_RUNNABLE;
    port_mutex_unlock(&thread->mutex);

    status = hythread_global_unlock();
    assert(status == TM_ERROR_NONE);

    return TM_ERROR_NONE;
}
Exemplo n.º 29
0
IDATA thread_sleep_impl(I_64 millis, IDATA nanos, IDATA interruptable) {
    IDATA status;
    IDATA result;
    hythread_t self;
    hythread_monitor_t mon;

    if (nanos == 0 && millis == 0) {
        hythread_yield();
        return TM_ERROR_NONE;
    }
    if (!(self = hythread_self())) {
        // Report error in case current thread is not attached
        return TM_ERROR_UNATTACHED_THREAD;
    }

    // Grab thread monitor
    mon = self->monitor;
    status = hythread_monitor_enter(mon);
    assert(status == TM_ERROR_NONE);
    assert(mon->recursion_count == 0);
    mon->owner = NULL;
    mon->wait_count++;

    // Set thread state
    status = port_mutex_lock(&self->mutex);
    assert(status == TM_ERROR_NONE);
    self->waited_monitor = mon;
    self->state |= TM_THREAD_STATE_SLEEPING;
    status = port_mutex_unlock(&self->mutex);
    assert(status == TM_ERROR_NONE);

    do {
        apr_time_t start;
        assert(mon->notify_count >= 0);
        assert(mon->notify_count < mon->wait_count);
        start = apr_time_now();

        result = condvar_wait_impl(&mon->condition, &mon->mutex, millis, nanos, interruptable);
        if (result != TM_ERROR_NONE) {
            break;
        }
        // we should not change millis and nanos if both are 0 (meaning "no timeout")
        if (millis || nanos) {
            apr_interval_time_t elapsed = apr_time_now() - start;
            nanos -= (IDATA)((elapsed % 1000) * 1000);
            if (nanos < 0) {
                millis -= elapsed/1000 + 1;
                nanos += 1000000;
            } else {
                millis -= elapsed/1000;
            }
            if (millis < 0) {
                assert(status == TM_ERROR_NONE);
                status = TM_ERROR_TIMEOUT;
                break;
            }
            assert(0 <= nanos && nanos < 1000000);
        }
    } while(1);

    // Restore thread state
    status = port_mutex_lock(&self->mutex);
    assert(status == TM_ERROR_NONE);
    self->state &= ~TM_THREAD_STATE_SLEEPING;
    self->waited_monitor = NULL;
    status = port_mutex_unlock(&self->mutex);
    assert(status == TM_ERROR_NONE);

    // Release thread monitor
    mon->wait_count--;
    mon->owner = self;
    assert(mon->notify_count <= mon->wait_count);
    status = hythread_monitor_exit(mon);
    assert(status == TM_ERROR_NONE);

    if (self->request) {
        hythread_safe_point();
        hythread_exception_safe_point();
    }

    return (result == TM_ERROR_INTERRUPT && interruptable)
        ? TM_ERROR_INTERRUPT : TM_ERROR_NONE;
}
Exemplo n.º 30
0
IDATA VMCALL hythread_thread_lock(hythread_t thread) {
    assert(thread);
    return port_mutex_lock(&thread->mutex);
} // hythread_thread_lock