/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Board-dependent initialization.
*/
portab_setup();
/*
* Initializes a serial-over-USB CDC driver.
*/
sduObjectInit(&PORTAB_SDU1);
sduStart(&PORTAB_SDU1, &serusbcfg);
/*
* Activates the USB driver and then the USB bus pull-up on D+.
* Note, a delay is inserted in order to not have to disconnect the cable
* after a reset.
*/
usbDisconnectBus(serusbcfg.usbp);
chThdSleepMilliseconds(1500);
usbStart(serusbcfg.usbp, &usbcfg);
usbConnectBus(serusbcfg.usbp);
/*
* Shell manager initialization.
*/
shellInit();
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity, spawning shells.
*/
while (true) {
if (PORTAB_SDU1.config->usbp->state == USB_ACTIVE) {
thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE,
"shell", NORMALPRIO + 1,
shellThread, (void *)&shell_cfg1);
chThdWait(shelltp); /* Waiting termination. */
}
chThdSleepMilliseconds(1000);
}
}
/*
* Application entry point.
*/
int main(void) {
unsigned i;
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Board-dependent GPIO setup code.
*/
portab_setup();
/*
* Prepare transmit pattern.
*/
for (i = 0; i < sizeof(txbuf); i++)
txbuf[i] = (uint8_t)i;
/*
* Starting the transmitter and receiver threads.
*/
chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa),
NORMALPRIO + 1, spi_thread_1, NULL);
chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa),
NORMALPRIO + 1, spi_thread_2, NULL);
#if defined(PORTAB_LINE_LED2)
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
#endif
/*
* Normal main() thread activity, in this demo it does nothing.
*/
while (true) {
chThdSleepMilliseconds(500);
}
return 0;
}
/*
* Application entry point.
*/
int main(void) {
static const evhandler_t evhndl[] = {
InsertHandler,
RemoveHandler,
ShellHandler
};
event_listener_t el0, el1, el2;
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
* - lwIP subsystem initialization using the default configuration.
*/
halInit();
chSysInit();
/*
* Initialize RNG
*/
rccEnableAHB2(RCC_AHB2ENR_RNGEN, 0);
RNG->CR |= RNG_CR_IE;
RNG->CR |= RNG_CR_RNGEN;
/* lwip */
lwipInit(NULL);
/*
* Target-dependent setup code.
*/
portab_setup();
/*
* Initializes a serial-over-USB CDC driver.
*/
sduObjectInit(&PORTAB_SDU1);
sduStart(&PORTAB_SDU1, &serusbcfg);
/*
* Activates the USB driver and then the USB bus pull-up on D+.
* Note, a delay is inserted in order to not have to disconnect the cable
* after a reset.
*/
usbDisconnectBus(serusbcfg.usbp);
chThdSleepMilliseconds(1500);
usbStart(serusbcfg.usbp, &usbcfg);
usbConnectBus(serusbcfg.usbp);
/*
* Shell manager initialization.
*/
shellInit();
/*
* Activates the SDC driver 1 using default configuration.
*/
sdcStart(&SDCD1, NULL);
/*
* Activates the card insertion monitor.
*/
tmr_init(&SDCD1);
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Creates the HTTPS thread (it changes priority internally).
*/
chThdCreateStatic(wa_https_server, sizeof(wa_https_server), NORMALPRIO + 1,
https_server, NULL);
/*
* Normal main() thread activity, handling SD card events and shell
* start/exit.
*/
chEvtRegister(&inserted_event, &el0, 0);
chEvtRegister(&removed_event, &el1, 1);
chEvtRegister(&shell_terminated, &el2, 2);
while (true) {
if (!shelltp && (PORTAB_SDU1.config->usbp->state == USB_ACTIVE)) {
shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE,
"shell", NORMALPRIO + 1,
shellThread, (void *)&shell_cfg1);
}
chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, TIME_MS2I(500)));
}
}
